what must happen for corn seeds to developer on the ear

Answers

Answer 1

Answer: Photosynthesis must happen in order for the corn seeds to develop on the ear.

Explanation: Photosynthesis is the process of a plant to make food, and allowing it to grow.  Photosynthesis's formula is  6CO2 + 6H2O


Related Questions

In what ways do you think that cancer evolution is similar to
bacterial evolution? In what ways is it different?

Answers

Cancer evolution is similar to bacterial evolution in that both are caused by a variety of genetic and environmental factors. However, cancer evolution is unique in that it is caused by a single cell becoming mutated, while bacterial evolution is caused by a collection of cells.

Cancer evolution is similar to bacterial evolution because of the following ways:

Random mutations contribute to the evolution of cancer and bacteria.Gene expression patterns change during the evolution of cancer and bacteria. Cancer and bacteria must adapt to their environment to survive and evolve.Cancer and bacteria have evolved mechanisms to evade the immune system.

Cancer evolution is different from bacterial evolution in the following ways:

Bacteria can rapidly evolve resistance to antibiotics.Cancer cells have a greater tendency to acquire genetic mutations than bacteria. Cancer cells arise from mutations in human cells, while bacteria exist as distinct organisms. Bacteria can exchange genetic material with other bacteria to accelerate their evolution.

Learn more about cancer at https://brainly.com/question/373177

#SPJ11

2. Which material refracted the light rays the most: air, water, or glass?
3. Which material refracted the light rays the least: air, water, or glass?
4. How does density affect refraction?

Answers

Answer: Your welcome!

Explanation:

1. Refraction occurs when light passes from one medium to another and its direction changes.

2. Glass refracted the light rays the most.

3. Air refracted the light rays the least.

4. The greater the density of the medium, the more the light rays are refracted.

What is the molecular mechanism of vaccine?
Group of answer choices
A. Stimulate an immune response
B. Inhibit translation of a defective protein
C. Alter exon splicing
D. Inhibit cytokine signaling

Answers

The molecular mechanism of a vaccine is to stimulate an immune response. Therefore, alternative A is correct.

A vaccine is a biological substance that simulates the creation of immunity to a disease. When vaccinated, the immune system recognizes the vaccine as a foreign invader and produces antibodies to fight it off.

Antibodies are produced by B-lymphocytes, a type of white blood cell that binds to the foreign substance or antigen and neutralizes it. The cellular response is stimulated by T-lymphocytes, which recognize and destroy cells infected with the antigen.

In conclusion, alternative A. Stimulate an immune response is correct.

See more about vaccine at https://brainly.com/question/625596.

#SPJ11

DNA polymerase is found in:
cells and all viruses
all viruses
some viruses
cells
cells and some viruses
RNA-dependent RNA polymerase is found in:
all viruses
some viruses
cells
cells and all viruses
cells and some viruses

Answers

DNA polymerase is found in cells and some viruses while RNA-dependent RNA polymerase is found in some viruses.

DNA polymerase is an enzyme found in cells and some viruses. It is responsible for synthesizing DNA molecules from nucleotides, the building blocks of DNA. DNA polymerase is essential for DNA replication and is therefore found in all cells and some viruses that replicate their DNA.

RNA-dependent RNA polymerase is an enzyme found in some viruses. It is responsible for synthesizing RNA molecules from RNA templates. This enzyme is essential for the replication of RNA viruses, which do not have DNA genomes. Therefore, RNA-dependent RNA polymerase is found in some viruses, but not in cells or all viruses.

Learn more about DNA polymerase here: https://brainly.com/question/1343187.

#SPJ11

You are now ready to complete the assessment for this Activity. Perform a lab using household materials to investigate the properties of water. As you prepare for, perform and report about your investigation, look for opportunities to practice good Organization Skills. Look for ways that you can present data and observations clearly and comprehensively. Finally, practice using vocabulary related to biochemistry to describe biological molecules.
Your write-up will
be typed, using spell check, table-making functions and headings.
include thorough observations
Include pictures of each of your results
summarize your results using concise language in a neat table. For quantitative observations, put units only in the column headings -- Ex. Volume (mL)
if you used internet or paper sources, reference them at the end of your report in a section called "References" in APA format in alphabetic order.
Offer detailed explanations using relevant specific terminology, examples and references
the corresponding relevance of the results to living things

Answers

To investigate the properties of water using household materials, you'll need to gather some supplies. Begin by measuring out 1 cup of water into the bowl. Observe its appearance and record any physical characteristics.

Then, add a few drops of food coloring and stir it in. Record the new color and any changes in the appearance of the water. Now, add 3 pieces of ice to the bowl and observe how the temperature of the water changes. Record any differences in the properties of water.

Next, take a spoon and stir the water. Record the motion and texture of the water. Finally, take a spoonful of the water and observe it under a microscope. Record any changes in the appearance and texture.


This activity has demonstrated the properties of water. Water has a liquid form at room temperature, but can be frozen into a solid form when cooled. Its state can be changed with food coloring, and it has a unique texture and motion when stirred.

Additionally, its small particles can be observed under a microscope. By studying the properties of water, you have been able to practice good organization skills, present data and observations clearly and comprehensively, and use vocabulary related to biochemistry.

Know more about properties of water here:

https://brainly.com/question/28417706

#SPJ11

1. A group of students (group 1) perform an experiment to determine the concentration of coliforms in potable water. In this experiment,5 mLof water was filtered and the membrane was incubated on mFC agar plates at37∘C. After 24 hours, the plate was observed for colonies. mFC agar is a selective media that allows for the growth of coliforms. On mFC agar, fecal coliforms form blue colonies and non-fecal coliforms form white colonies. The mFC agar contains selective and differential agents that allow for growth and identification of coliforms. Rosolic acid inhibits bacterial growth in general, except for growth of coliforms. Bile salts inhibit contaminating gram positive bacteria. Aniline blue indicates the ability of fecal coliforms to ferment lactose to acid that causes a pH change in the medium. Lactose utilization (blue color) is the basis for identification of fecal coliforms. A. (1 pt) From the picture above, calculate the number (in CFU) of total coliforms and the number of fecal coliforms in the5 mL sample of water. Be sure to include units in your answer Non-fecal coliform are
1CFU/mL
and fecal coliform are
4CFU
B. (1 pt) Now, calculate the concentration (in CFU/100 mL) of total coliforms in the water sample. Our standard for reporting is CFU/100mL. Keep in mind that you have only filtered 5
mL
of water, but you have to calculate the number of organisms in
100 mL
, There are two ways to do this: (1) use the formula in the protocol, or (2) consider that
100 mL
is
10X
greater than
10mh
Be sure to include units in your answer. C. (0.5 pt) Would you drink this water? Why or Why not? D. (0.5 pt) Why do non-fecal coliforms form white colonies while fecal coliform formed blue colonies in the above picture? E.(0.5pt) If you were to gram stain one of the blue colonies on the plate, what would you predict for the results of that gram stain? Include shape, color, and what the gram stain color indicates.

Answers

A. Based on the information provided, the number of total coliforms in the 5 mL sample of water is 5 x 1 CFU/mL = 5 CFU,

the number of fecal coliforms is 1 x 4 CFU = 4 CFU.

B. the concentration of total coliforms in the water sample is 288 CFU/100 mL.

C. Based on the high concentration of coliforms in the water sample, it is not safe to drink.

D. Non-fecal coliforms form white colonies because they do not ferment lactose to produce acid, and therefore do not cause a pH change in the medium that would result in a blue color.

E. If we were to gram stain one of the blue colonies on the plate, we would predict that it is a gram-negative bacterium.

Coliform Concentration Calculation

A. Based on the information provided, the number of total coliforms in the 5 mL sample of water is 5 x 1 CFU/mL = 5 CFU,

the number of fecal coliforms is 1 x 4 CFU = 4 CFU.

B. To calculate the concentration of total coliforms in CFU/100 mL, we can use the following formula:

Concentration (CFU/100 mL) = (Number of colonies / Volume plated) x (Dilution factor / Volume filtered) x 100

In this case, the dilution factor is 20 (assuming a 1:20 dilution was used), and the volume filtered is 5 mL. To calculate the volume plated, we need to know the diameter of the membrane filter used. Let's assume it was 47 mm, which corresponds to a surface area of approximately 17.36 cm^2. Using a conversion factor of 1 cm^2 = 0.1 mL, we can estimate the volume plated as:

Volume plated = Surface area x Depth of agar = 17.36 cm^2 x 0.2 cm = 3.472 mL

Plugging in the values, we get:

Concentration (CFU/100 mL) = (5 / 3.472) x (20 / 5) x 100 = 288 CFU/100 mL

Therefore, the concentration of total coliforms in the water sample is 288 CFU/100 mL.

C. Based on the high concentration of coliforms in the water sample, it is not safe to drink. Coliforms are indicators of fecal contamination and their presence in drinking water can indicate the presence of harmful pathogens.

D. Non-fecal coliforms form white colonies because they do not ferment lactose to produce acid, and therefore do not cause a pH change in the medium that would result in a blue color. Fecal coliforms, on the other hand, can ferment lactose and produce acid, which results in the blue color of their colonies.

E. If we were to gram stain one of the blue colonies on the plate, we would predict that it is a gram-negative bacterium. Gram-negative bacteria typically appear pink or red after staining, and this color indicates that the bacteria have a thin peptidoglycan layer in their cell walls and an outer membrane containing lipopolysaccharides. The shape of the bacteria would depend on the species, but coliforms are generally rod-shaped (bacilli).

Learn more on coliforms here https://brainly.com/question/13187856

#SPJ1

good morning! i have a question!
how is a sedimentary rock made?

Answers

Sedimentary rocks are made by the weathering of other broken down rocks or plants. Over time the materials create layers off of the broken down material. Then after that, pressure is put on the rock and plant layers for a long period of time. After a while of the pressure being put on the rock and plant layers a new rock forms out of the materials forming Sedimentary Rock.

I really hope this helps you out!

A 27 year-old female is receiving prenatal care. At the end of her last tri-semester, her OB/GYN physician orders a routine vaginal culture as recommended by the American College of Obstetricians and Gynecologists (ACOG). She is not exhibiting any signs or symptoms of infection. What bacteria was isolated?

Answers

The American College of Obstetricians and Gynecologists (ACOG) recommends that all 27 year-old pregnant women receive a routine vaginal culture.

Since the patient is not exhibiting any signs or symptoms of infection, the culture will typically be testing for bacterial vaginosis (BV).

BV is caused by an overgrowth of certain types of bacteria, including Gardnerella vaginalis, Mobiluncus, Mycoplasma hominis, and Bacteroides. These bacteria may be present in the vagina but not necessarily cause any symptoms.

To know more about  bacterial vaginosis click on below link:

https://brainly.com/question/28478235#

#SPJ11

Explain why a change in pH did not have an effect on the production of oxygen. What did a change in pH effect? The pH was being changed specifically in the stroma, why does this mean that the change in pH would have that effect but not affect oxygen?

Answers

A change in pH did not have an effect on the production of oxygen because the production of oxygen occurs in the thylakoid membranes, not in the stroma.

The stroma is the fluid-filled space surrounding the thylakoid membranes, and it is where the Calvin cycle takes place. The Calvin cycle is responsible for the production of glucose, not oxygen. Therefore, a change in pH in the stroma would have an effect on the production of glucose, but not on the production of oxygen. This is because the enzymes involved in the Calvin cycle are sensitive to changes in pH and may not function properly if the pH is too high or too low. However, the enzymes involved in the production of oxygen in the thylakoid membranes are not affected by changes in pH in the stroma.

Learn more about thylakoid membranes at

https://brainly.com/question/4976370

#SPJ11

Allele and genotype frequencies and their statistical meaning 1. We suspect that South African pilchard (Sardinops sagax) caught on the Agulhas Bank comprises two distinct breeding populations. To test this hypothesis we use PCR based genotyping of the Rhodopsin gene, obtaining the following results: CC CT TT 50 125 200
Interpret these data considering uncertainty in our estimates of gene frequencies: [11.5]
a. Estimate allele frequencies and genotype frequencies in this population [6.5] b. Estimate the lower 95% confidence limits for the C's allele frequency [2] c. We sequenced additional individuals and recovered a third allele (allele A) in the population. The genotype counts of our sample are now : CC СТ TT AA AC AT 50 125 200 75 25 50 What is the observed heterozygosity in this sample? [3]

Answers

a. To estimate allele frequencies, we can count the number of each allele and divide by the total number of alleles. In this case, there are 2 alleles (C and T), and a total of 375 alleles (50 CC + 125 CT + 200 TT). The frequency of the C allele is:

(C alleles) / (total alleles) = (50 + 125) / 375 = 0.47

The frequency of the T allele is:

(T alleles) / (total alleles) = (125 + 200) / 375 = 0.53

To estimate genotype frequencies, we can count the number of each genotype and divide by the total number of genotypes. In this case, there are 3 genotypes (CC, CT, and TT), and a total of 375 genotypes. The frequency of the CC genotype is:

(CC genotypes) / (total genotypes) = 50 / 375 = 0.13

The frequency of the CT genotype is:

(CT genotypes) / (total genotypes) = 125 / 375 = 0.33

The frequency of the TT genotype is:

(TT genotypes) / (total genotypes) = 200 / 375 = 0.53

b. To calculate the lower 95% confidence limit for the C allele frequency, we can use the formula:

p - 1.96 * sqrt(p*(1-p)/n)

where p is the observed frequency of the C allele, and n is the total number of alleles. Substituting the values, we get:

0.47 - 1.96 * sqrt(0.47*0.53/375) = 0.41

So the lower 95% confidence limit for the C allele frequency is 0.41.

c. The observed heterozygosity is a measure of the proportion of individuals that are heterozygous for a given locus. To calculate the observed heterozygosity, we can use the formula:

H_obs = 1 - (n[AA] + n[CC] + n[TT]) / (n * (n - 1))

where n is the total number of individuals genotyped, and n[AA], n[CC], and n[TT] are the numbers of individuals with the AA, CC, and TT genotypes, respectively. Substituting the values, we get:

H_obs = 1 - (75 + 50 + 200) / (450 * 449) = 0.38

So the observed heterozygosity is 0.38.

Learn more about allele frequencies here: https://brainly.com/question/29563534

#SPJ11

can
someone help me make a dichotomous key with these organisms
Staphylococcus epidermidis, diphtheroids streptococci,
Staphylococcus aureus, Pseudomonas aeruginosa, Candida, Torulopsis,
Pityrosporum?

Answers

Yes, certainly! To make a dichotomous key with these organisms, you should begin by identifying the characteristics that can be used to differentiate between them.


A dichotomous key is a tool used to classify and identify organisms by using a series of yes or no questions about their physical characteristics. Here is an example of how you can create a dichotomous key for the organisms you listed:

1. Is the organism a bacterium?
 a. Yes - Go to question 2
 b. No - Go to question 3
2. Does the bacterium form clusters?
 a. Yes - Staphylococcus aureus or Staphylococcus epidermidis
 b. No - Pseudomonas aeruginosa or diphtheroids streptococci
3. Is the organism a yeast?
 a. Yes - Candida or Torulopsis
 b. No - Pityrosporum

From here, you can continue to ask more specific questions about the physical characteristics of each organism to narrow down the identification. Remember to always be concise and accurate in your questions and answers.

Learn more about dichotomous keys at https://brainly.com/question/1726339

#SPJ11

In the Socio-ecological Framework for childhood obesity,
parent's workplace stressors are an example of a(n) _______________
level determinant of health.
a. Exosystem
b. Mesosystem
c. Individual
d. Mi

Answers

In the Socio-ecological Framework, parents' workplace stressors are an example of an a) exosystem-level determinant of health.

The exosystem refers to external systems that indirectly affect an individual's health, such as the workplace, community, and media. Parents' workplace stressors can affect their ability to provide healthy food options and engage in physical activity with their children, which can contribute to childhood obesity.

Additionally, parents may be more likely to engage in unhealthy coping mechanisms such as emotional eating or neglecting their own health behaviors, which can further impact their children's health outcomes.

By recognizing and addressing these exosystem-level determinants, interventions can be designed to support healthy behaviors for both parents and children.

For more questions like Ecological click the link below:

https://brainly.com/question/29036649

#SPJ11

How is a chromosome disorder diagnosed?

Answers

A chromosome disorder is typically diagnosed through a variety of tests, such as a karyotype and a chromosome analysis. A karyotype is a analysis of a person’s chromosomes and can be done through a blood sample or amniotic fluid.

This will show any abnormalities in the number of chromosomes or in the structure of the chromosomes. A chromosome analysis looks at the size and shape of each chromosome to determine if there are any abnormalities.

This test can be done through a skin sample, amniotic fluid, or a sample of the placenta. In some cases, a genetic counselor or doctor may also order additional tests, such as a DNA or gene test, or chromosomal microarray, to help diagnose the disorder. Once a chromosome disorder is diagnosed, a treatment plan can be developed to help manage symptoms and prevent further complications.

Know more about karyotype here

https://brainly.com/question/21086814#

#SPJ11

during cell mediated immunity,
B7 on dendritic cell will bind to CD28 on t cell. but tcr and mhc
II also need to interact. is the tcr binding to a self or non self
peptide on the mhc molecule??

Answers

During cell mediated immunity, the T cell receptor (TCR) binds to a non-self peptide on the MHC molecule.

This is because the main function of cell mediated immunity is to recognize and eliminate foreign or non-self antigens. The dendritic cell presents the non-self peptide on its MHC II molecule to the TCR on the T cell.

The interaction between the TCR and the non-self peptide on the MHC II molecule, along with the binding of B7 on the dendritic cell to CD28 on the T cell, leads to the activation of the T cell and the initiation of the immune response.

Learn more about cell mediated immunity at: https://brainly.com/question/11707300

#SPJ11

Salmon are masters of osmoregulation. They are able to control both body fluids and ions during the transition from fresh water to salt water and back again. Young salmon, called smolt, are born of eggs hatched in freshwater and must prepare for life in the salty ocean. The young salmon will soon be bathed in ocean water that is about three times as concentrated as its body fluids, meaning that it will tend to lose water to its surroundings all of the time. All BUT ONE adaptation helps the salmon survive the change from fresh water to salt water.

A The salmon start drinking a lot of water.The salmon start drinking a lot of water.
B The salmon excrete a lot of very dilute urine.The salmon excrete a lot of very dilute urine.
C The kidneys drop their urine production.The kidneys drop their urine production.
D The gills actively pump Na+ and Cl− ions out into the water.

Answers

Answer:

A, B, and C are adaptations that help the salmon survive the change from fresh water to salt water. The salmon start drinking a lot of water to compensate for the water loss to its surroundings, and excrete a lot of very dilute urine to get rid of excess water and retain essential salts. The kidneys drop their urine production to conserve body fluids.

D is not an adaptation that helps the salmon survive the change from fresh water to salt water. Instead, it would cause the salmon to lose more ions and water to its surroundings, exacerbating the osmotic stress. Therefore, the correct answer is D.

Explanation:

Why does Benedict's solution change color with glucose?IODINE TEST FOR STARCHES 1. What was the purpose of water in this experiment? 2. Which gave a stronger positive result (more intense color), apple juice or potato juice? 3. Is starch ever present in animal products such as milk, meat or eggs? Explain. 4. Why did the glucose solutions give a negative result?

Answers

Benedict's solution changes color with glucose because it is a reducing sugar. 1. Water served as a control in the experiment. 2. Apple juice provides a stronger positive. 3. Starch is not present in animal products. 4. Glucose solutions give a negative result as they cannot form a blue-black color with iodine solution.

When Benedict's solution is added to glucose, it reacts with glucose in a way that produces a red-brown precipitate. This reaction is called a reduction reaction. The Iodine test for starches involves mixing iodine solution with a solution containing starch. Iodine reacts with starch molecules to form a blue-black color, which is an indication that starch is present in the solution.

1. The purpose of water in the experiment was to serve as a control. It allows the researcher to compare the reaction of other solutions to that of pure water.

2. Apple juice gives a stronger positive result than potato juice. This is because apples contain a higher amount of reducing sugars than potatoes.

3. Starch is not present in animal products such as milk, meat, or eggs because starch is a plant-based carbohydrate. However, these animal products contain other types of carbohydrates such as lactose in milk and glycogen in meat.

4. Glucose solutions gave a negative result because they are not capable of forming a blue-black color with iodine solution. Only polysaccharides like starch can give a positive result in the iodine test.

Learn more about Glucose:

https://brainly.com/question/461228

#SPJ11

does the low brecipitation of rain has a direct impact on insect biodiversity by causing them to lose food and habitat? Which year had the lowest insect biodiversity?
and why answring this question important?
write a biological hypothesis for this question

Answers

Yes, the low precipitation of rain can have a direct impact on insect biodiversity by causing them to lose food and habitat.

One example of this is the drastic reduction of honeybee populations in the United States due to a combination of pesticides, disease, and drought. As a result, pollination of many agricultural and native plants has suffered, which can in turn lead to a loss of insect biodiversity.

The year with the lowest insect biodiversity is not certain, as there are many factors that affect insect populations, including climate, human activity, and pollution. However, some studies suggest that insect biodiversity has been in decline since the 1970s due to environmental destruction, habitat destruction, and pesticide use.

Understanding the causes and consequences of insect biodiversity loss is important in order to take corrective action to protect insect populations and their habitats.

For example, by increasing habitat protection, creating protected areas, reducing pesticide use, and engaging in public outreach and education, we can help conserve and protect insect biodiversity. Additionally, understanding the impacts of climate change on insect populations is crucial for predicting future changes in insect biodiversity.

A biological hypothesis for this question could be that the low precipitation of rain has a direct impact on insect biodiversity by causing them to lose food and habitat, which in turn leads to a decline in insect populations. The factors contributing to this decline are climate change, human activity, and pesticide use.

To know more about biodiversity, refer here:

https://brainly.com/question/13073382#
#SPJ11

In your guinea pig population, the founding generation had a linkage disequilibrium coefficient value of 0.4. If the recombination rate between the ear and coat color loci is 0.4, what will be the level of LD (measured as D) in 4 generations?

Answers

The expected level of LD in 4 generations will be approximately 0.057.

The level of LD, measured as D, in 4 generations depends on the rate of decay of LD due to recombination. The expected value of D after 4 generations can be estimated using the formula:

D = D0 * (1 - r)^n

Where D0 is the initial LD coefficient (0.4), r is the recombination rate between the loci (0.4), and n is the number of generations (4).

Plugging in these values, we get:

D = 0.4 * (1 - 0.4)^4 ≈ 0.057

Therefore, the expected level of LD in 4 generations will be approximately 0.057. This suggests that the loci are becoming increasingly unlinked due to recombination.

For more questions like Guinea click the link below:

https://brainly.com/question/15385957

#SPJ11

signal transduction when ligand binds a receptor, the receptor = conformational change: launches a series of biochemical reactions within the cell signal transduction cascade: receptor binds to ligand, the message is amplified intracellularly

Answers

Signal transduction is the process in which a signal, such as a ligand, is converted into a response within a cell. When a ligand binds to a receptor, it can cause a conformational change in the receptor that launches a series of biochemical reactions within the cell, known as the signal transduction cascade. This cascade involves the receptor binding to the ligand, and then the message is amplified intracellularly.


Signal transduction is the process by which a cell converts an extracellular signal into an intracellular response. This process typically begins when a ligand, such as a hormone or neurotransmitter, binds to a receptor on the cell surface. This binding causes a conformational change in the receptor, which then activates a series of biochemical reactions within the cell. These reactions, known as a signal transduction cascade, amplify the original signal and ultimately lead to a specific cellular response. The specific response depends on the type of receptor and the type of ligand, and can include changes in gene expression, protein activity, and cellular metabolism.

For more such questions on Signal transduction, click on:

https://brainly.com/question/20372593

#SPJ11

Based on your review of the Bradbury et al. (2005) paper,
explain why editing a non-aromatic rice to make it aromatic would
be easier than making an aromatic rice non-aromatic.

Answers

As stated in the article by Bradbury et al. (2005), editing a non-aromatic rice to make it aromatic is easier because only the inactivation of a single gene would be required.

The Bradbury et al. (2005) paper explains that the production of the aromatic compound 2-acetyl-1-pyrroline (2AP) in rice is controlled by a single gene called the "badh2" gene.

In aromatic rice varieties, this gene is either non-functional or has a deletion, leading to the production of 2AP and the characteristic aroma. In non-aromatic rice varieties, the "badh2" gene is functional and prevents the production of 2AP.

Therefore, editing a non-aromatic rice to make it aromatic would be easier because it would only require the inactivation or deletion of a single gene. On the other hand, making an aromatic rice non-aromatic would require the insertion of a functional "badh2" gene, which is a more complex process.

See more about gene inactivation at https://brainly.com/question/28616779.

#SPJ11

The okapi is an animal that lives in the Democratic Republic of the Congo and is the closest living relative to the giraffe. Okapi's tongues can be as long as
35−45 cm
, which makes them the only animal that can lick their own eyes and ears. This long tongue may have evolved in part so that okapis can groom themselves and remove parasites from their face. Determine how Lamarck would have explained the evolution of the long tongue in okapis by placing the following events in the correct order. long tongues become more common in the okapi population parasites land on the faces of okapis, irritating their skin and transmitting diseases okapis stretch their tongues in an effort to remove facial parasites long tongues are inherited by okapi offspring Which of the following statements regarding variations in a population is true? variations in a population always affect an individuals survival variations in a population are always visible variations in a population can change over time variations in a population are always beneficial

Answers

Lamarck would have explained the evolution of the long tongue in okapis in the following order:


1. Parasites land on the faces of okapis, irritating their skin and transmitting diseases
2. Okapis stretch their tongues in an effort to remove facial parasites
3. Long tongues become more common in the okapi population
4. Long tongues are inherited by okapi offspring

According to Lamarck's theory of evolution, organisms can acquire traits during their lifetime through use and disuse, and these acquired traits can be passed on to their offspring. In the case of the okapi.

Lamarck would have believed that the stretching of their tongues to remove parasites led to the development of longer tongues, which were then inherited by their offspring.

The correct statement regarding variations in a population is: "variations in a population can change over time."

Variations in a population can arise through mutations or genetic recombination, and these variations can change over time through natural selection, genetic drift, or other evolutionary processes.

Not all variations are visible, beneficial, or affect an individual's survival.

To know more about genetic drift click on below link:

https://brainly.com/question/12086252#

#SPJ11

Explain how the nitrate reduction test works and describe the
underlying physiology for which it is testing.

Answers

The nitrate reduction test is a biochemical test used to determine the ability of an organism to reduce nitrate (NO₃) to nitrite (NO₂) or other nitrogenous compounds through the process of nitrate reduction.

This test is commonly used in the identification of bacteria, as different species have varying abilities to reduce nitrate.

The test works by inoculating a nitrate broth with the organism of interest and incubating for a period of time. After incubation, a reagent is added to the broth to test for the presence of nitrite. If nitrite is present, it will react with the reagent to produce a red color, indicating a positive result for nitrate reduction.

If no color change occurs, it may mean that the organism is not capable of reducing nitrate, or that it has reduced it to another nitrogenous compound. In this case, a second reagent is added to test for the presence of other nitrogenous compounds. If a color change occurs after the addition of the second reagent, it indicates a positive result for nitrate reduction to another compound.

The underlying physiology of nitrate reduction involves the use of nitrate reductase enzymes, which catalyze the reduction of nitrate to nitrite or other nitrogenous compounds. Different species of bacteria have different types and levels of nitrate reductase enzymes, which is why the nitrate reduction test can be used to differentiate between species.

Learn more about nitrogenous compounds at: https://brainly.com/question/29752049

#SPJ11

1. Suppose a nerve biopsy was performed on a POTS patient, and the results were abnormal. Is it still possible for a diagnosis to be POTS? 2. Would you expect anosmia to be a symptom of POTS? Why or why not? (Give details of the physiology behind your answer)

Answers

1. Yes, it is still possible for a diagnosis to be POTS even if a nerve biopsy is abnormal.


2. Anosmia, or the loss of sense of smell, is not typically ab of POTS.

1. POTS, or Postural Orthostatic Tachycardia Syndrome, is a condition where the heart rate increases significantly upon standing. It is a form of dysautonomia, or dysfunction of the autonomic nervous system.

The autonomic nervous system controls automatic bodily functions, such as heart rate, blood pressure, and digestion. An abnormal nerve biopsy could indicate a problem with the autonomic nervous system, which could contribute to the development of POTS.

However, POTS is a complex condition that is not fully understood and can have multiple causes. Therefore, an abnormal nerve biopsy does not rule out a diagnosis of POTS.

2. POTS primarily affects the cardiovascular system and can cause symptoms such as lightheadedness, fainting, rapid heart rate, and low blood pressure. Anosmia is typically caused by damage to the olfactory nerves or the olfactory bulb in the brain, which are responsible for the sense of smell.

These structures are not directly affected by POTS. However, it is important to note that POTS can co-occur with other conditions that may cause anosmia, such as chronic sinusitis or a head injury.

To know more about nervous system click on below link:

https://brainly.com/question/29355295#

#SPJ11

I need help filling in rest of blanks

Answers

Answer:IM A GENIUS I GOT IT-

blank 6 is telophase 1

blank 8 is prophase 2

and blank 4 is metaphase2

Explanation:

In a given nonevolving population, 51% of the individuals display the dominant phenotype. What proportion of the alleles in this population are dominant? a) 0.09
b) 0.3
c) 0.49
d) 0.51
e) 0.7

Answers

The proportion of the alleles in this 51% of the individuals that are dominant is 0.7.

Thus, the correct answer is option E.

To find the proportion of the dominant alleles in the population, we can use the Hardy-Weinberg equation:

p² + 2pq + q² = 1

where p is the frequency of the dominant allele, q is the frequency of the recessive allele, and p² and q² represent the frequencies of the homozygous dominant and recessive genotypes, respectively. The term 2pq represents the frequency of the heterozygous genotype.

Given that 51% of the individuals display the dominant phenotype, this means that p² + 2pq = 0.51. We can rearrange the equation to solve for p:

p² + 2pq = 0.51

p² + 2p(1-p) = 0.51

p² + 2p - 2p² = 0.51

p² - 2p + 0.51 = 0

Using the quadratic formula, we can find the value of p:

p = (-b ± √(b² - 4ac))/(2a)

p = (-(-2) ± √((-2)² - 4(1)(0.51)))/(2(1))

p = (2 ± √(4 - 2.04))/2

p = (2 ± √1.96)/2

p = (2 ± 1.4)/2

p = 0.7

Thus, the proportion of the alleles in this population that are dominant is 0.7.

For more information about dominant phenotype refers to the link: https://brainly.com/question/25332551

#SPJ11

There are two chemicals: chemical A and chemical B. According to dose-response assessments of the chemicals, ED50 of chemical A is much greater than that of chemical B. Which chemical is more toxic?

Answers

The ED50 (effective dose for 50% of the population) is the dose at which 50% of the individuals exposed to a chemical will show a specified response.

If the ED50 of chemical A is much greater than that of chemical B, it means that a higher dose of chemical A is required to produce the same response as chemical B. This suggests that chemical A is less toxic than chemical B, as it takes a higher dose of chemical A to produce the same effect as chemical B.

However, it is important to note that toxicity is a complex issue that depends on many factors, including the mode of action of the chemicals, the duration and route of exposure, and the sensitivity of the organism being exposed.

For more about chemicals:

https://brainly.com/question/13145357

#SPJ11

Evolutionary Agents-PepGen Fishpond vour defermination. If the population evolved, sate the supected mechanim of micioevolution that caused the change.

Answers

Evolutionary Agents-PepGen Fishpond vour defermination. If the population evolved, the supected mechanim of micioevolution that caused the change is natural selection.

Natural selection is the process by which individuals with certain heritable traits are more likely to survive and reproduce than individuals without those traits. Over time, this can lead to changes in the frequency of those traits in the population, resulting in evolution. In the case of the PepGen Fishpond, it is likely that some individuals had traits that made them better adapted to the environment, such as the ability to find food more efficiently or to avoid predators more effectively. These individuals would have been more likely to survive and reproduce, passing on their advantageous traits to their offspring. Over time, these traits would have become more common in the population, leading to the observed changes.

It is important to note that natural selection is not the only mechanism of microevolution. Other mechanisms, such as genetic drift, gene flow, and mutation, can also lead to changes in the frequency of traits in a population. However, natural selection is often the most important mechanism, particularly in situations where there is strong selective pressure on a population.

Learn more about natural selection at:

https://brainly.com/question/14879380

#SPJ11

plssssssssss helppppp I WILL GIVE POINTSSS

Answers

The correct order of the waves by amplitude, beginning with the wave with the largest amplitude is W, Y, X, Z

What is the amplitude of a wave?

The amplitude of a wave is the maximum displacement of the medium (such as the displacement of the surface of a body of water or the displacement of air molecules in a sound wave) from its rest position as the wave passes through it.

In simpler terms, the amplitude of a wave represents the magnitude or strength of the wave as it oscillates from its equilibrium point. For example, in a sound wave, the amplitude corresponds to the loudness or intensity of the sound.

Learn more about the amplitude of a wave at: https://brainly.com/question/25748143

#SPJ1

In analyzing a human pedigree, you find the trait to "skip generations." Males and females are equally affected. An affected child often will have both parents unaffected. The trait is most likely:
a) dominant
b) we cannot tell with the information given
c) recessive

Answers

The trait is most likely recessive, as the fact that males and females are equally affected, and affected children often have both parents unaffected, indicates that the trait is being passed from unaffected parents to their affected children. Therefore, the correct answer is C.

A recessive trait is one that is only expressed when two copies of the gene are present. This means that an individual can be a carrier of the trait without actually expressing it, which is why the trait can "skip generations" and why unaffected parents can have an affected child. If the trait were dominant, it would be expressed in every generation and affected individuals would likely have at least one affected parent.

Learn more about recessive trait at https://brainly.com/question/3128896

#SPJ11

Submit your observations and answers to the questions:
NEED HELP

Submit your observations.
Give an explanation of what is happening in this experiment.
What do you think would happen if this experiment was conducted with skim milk?Explain your response.
What do you think would happen if this experiment was conducted with cream?Explain your response.
What do you think would happen if this experiment was conducted with water?Explain your response.

Answers

The experiment that was conducted is the color-changing milk experiment and the results obtained differed based on the nature of the fat molecules used.

What is the color-changing milk experiment?

The color-changing milk experiment demonstrates the effects of dish soap on the surface tension of milk.

Milk contains proteins and fats, which create a thin layer of surface tension that prevents liquids from spreading out or mixing easily. When a drop of dish soap is added to the milk, the soap molecules attach to the fat molecules and weaken the surface tension. This allows the colors to mix and spread more easily, creating the swirling patterns that we observe.

During the color-changing milk experiment, the following observations can be made:

When a drop of food coloring is added to the milk, it spreads out quickly and uniformly.After adding a drop of dish soap to the milk, the colors begin to move and mix together.The colors start to form swirling patterns and continue to move until they eventually fade away.

If this experiment was conducted with skim milk, it is likely that the colors would mix and spread more easily than in whole milk. The swirling patterns may also be more pronounced and last longer than in whole milk.

If this experiment was conducted with cream, it is likely that the colors would not mix and spread as easily as in whole milk. The swirling patterns may be less pronounced and fade away more quickly than in whole milk.

If this experiment was conducted with water, the colors would simply mix and spread out uniformly in the water without forming any swirling patterns. The colors may also be less vibrant in water than in milk.

Learn more about experiments at: https://brainly.com/question/17274244

#SPJ1

Complete question:

Title: Color changing milk experiment

Submit your observations.

Give an explanation of what is happening in this experiment.

What do you think would happen if this experiment was conducted with skim milk?Explain your response.

What do you think would happen if this experiment was conducted with cream?Explain your response.

What do you think would happen if this experiment was conducted with water?Explain your response.

Other Questions
The graph of f(x)=x^2 was transformed to create g(x)=2/3x^2 Mark the statement. True or FalseThe graph of g(x) will be wider than f(x) In a class in a middle school, there were 80 students. 30 percent were girls. How many of the class were boys. Awnser in percents. I WILL GIVE BRAINLESS PLSSSSSSSSSSSSSSSSSSSSSSSSSS what is the Hypothesis and Opinion of the followning text? Most natural environments exhibit a substantial component of random variation, with a degree of temporal autocorrelation that defines the color of environmental noise. Such environmental fluctuations cause random fluctuations in natural selection, affecting the predictability of evolution. But despite long-standing theoretical interest in population genetics in stochastic environments, there is a dearth of empirical estimation of underlying parameters of this theory. More importantly, it is still an open question whether evolution in fluctuating environments can be predicted indirectly using simpler measures, which combine environmental time series with population estimates in constant environments. Here we address these questions by using an automated experimental evolution approach. We used a liquid-handling robot to expose over a hundred lines of the micro-alga Dunaliella salina to randomly fluctuating salinity over a continuous range, with controlled mean, variance, and autocorrelation. We then tracked the frequencies of two competing strains through amplicon sequencing of nuclear and choloroplastic barcode sequences. We show that the magnitude of environmental fluctuations (determined by their variance), but also their predictability (determined by their autocorrelation), had large impacts on the average selection coefficient. The variance in frequency change, which quantifies randomness in population genetics, was substantially higher in a fluctuating environment. The reaction norm of selection coefficients against constant salinity yielded accurate predictions for the mean selection coefficient in a fluctuating environment. This selection reaction norm was in turn well predicted by environmental tolerance curves, with population growth rate against salinity. However, both the selection reaction norm and tolerance curves underestimated the variance in selection caused by random environmental fluctuations. Overall, our results provide exceptional insights into the prospects for understanding and predicting genetic evolution in randomly fluctuating environments. Author summary: Being able to predict evolution under natural selection is important for many applied fields of biology, ranging from agriculture to medicine or conservation. However, this endeavor is complicated by factors that inherently limit our ability to predict the future, such as random fluctuations in the environment. Population genetic theory indicates that probabilistic predictions can still be made in this context, but the extent to which this holds empirically, and whether these predictions can be based on simple measurements, are still open questions. Making progress on answering these questions can be achieved by capitalizing on experiments where the environment is precisely controlled over many generations. Here, we used a pipetting robot to generate random time series of salinities with controlled patterns of fluctuations, which we imposed on a microalga, Dunaliella salina. Tracking the frequencies of two genotypes in a mixture by sequencing a short barcode sequence, we were able to show how patterns of fluctuating selection relate to the fluctuating environment. Interestingly, parts of these responses, but not all, could be predicted by simpler measurements in constant environments, allowing precise characterization the limits and prospects for predicting evolution in fluctuating environments. [ABSTRACT FROM AUTHOR] You have mRNA sequences as follows, please draw and label all the machineries step by step that are involved in translation of this segment. Please include all factors, enzymes, and machineries for initiation and elongation and termination. I copied and pasted a few repeats of same sequence for you to utilize to draw and label all. Once you draw, please provide detailed description of each of your drawing What is the boys attitude towards the craven match? How does south africa government use progressive taxes to address economic equity through its national budget Helppp! The tree diagram below shows all of the outcomes for flipping 3 coins. Which outcome is represented x? Picture below. On a certain route, an airline carries 9000 passengers per month, each paying $150. A market survey indicates that for each$1 decrease in the ticket price, the airline will gain 50 passengers. Express the monthly revenue for the route, R, as a function of the ticket price, x. Using the given functions: f(x)=2x^(2)-5x-3,g(x)=x-3 and h(x)=2x+5, what is the product of (g*f)(x) ? 2x^(3)+11x^(2)+18x+9 2x^(3)-z^(2)-18x+9 2x^(3)-x^(2)-12x+9 Help similar triangles Identificardrop down activity 2 attempts left due january 22nd 11:59 pm instructions indicate which person or persons would make each statement based on the flash cultura video Convert the following angles measures to degrees or radius. Look for a pattern in the table. Find the missing addends and sums You go into a car dealership and tell them that you have a budget of $300/month. You are interested in getting a Chevy Cruze that is on sale for $16,000. Due to your excellent credit score, you qualify for a 5-year loan at 4% APR with No Down Payment. What is your monthly payment? Are you within budget?how much will the car cost you after the loan has been paid in full? HELP..ASAP.HURRY What is the height (in inches) of a triangle with an area of 720square inches and base of 32 inches? log2(9x^10/y)Can someone explain it step by step? Evaluate log3 3^(2x+1) PLS HELP ME! Place the events in the correct order. 1. The North Korean army quickly advanced, pushing South Korean army South to Pusan, South Korea. 2. The USA sent troops to South Korea to support their army. 3. US forces quickly pushed North Koreans back over the 38th parallel and almost back to the Yalu River on Chinas border.4. China invaded Korea and drove US/UN forces back below the 38th parallel. 5. Eisenhower won the YS presidential election, promising an end to the war. 6. The USA asked the UN for help and they agreed to send troops. 7. The armistice was signed on the 38th parallel, leaving Korea divided still today. 8. Stalemate! The UN sends MORE troops to Korea and northern Communist forces were sent back to the 38th parallel. Pls help me figure this out!