what is the temperature of 1.2 moles of Helium gas at 1950mm Hg if it occupies 15,500 ml of volume?

Boyle's Law-

[tex]\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}\\[/tex]

(Pressure is inversely proportional to the volume)

Where-

As per question, we are given that -

Now that we have all the required values and we are asked to find out the final volume, so we can put the values and solve for the final volume -

[tex]\:\:\:\:\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}[/tex]

[tex]\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf 2.75 \times 12= 7.25 \times V_2\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2 = \dfrac{2.75 \times 12 }{7.25}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2 = \cancel{\dfrac{ 33}{7.25}}\\[/tex]

[tex]\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf V_2 = 4.5517........\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf \underline{V_2 = 4.56 \:mL }\\[/tex]

Therefore, the volume will become 4.56 mL if the pressure becomes 7.25atm.

The best estimate for the average distance between gas molecules is therefore b. d, or 1 diameter.

The density of a substance in the gas state is typically much less than its density in the liquid state because the molecules are much farther apart from each other in the gas phase. The average distance between gas molecules can be estimated using the formula:

d =[tex](V / N)^(1/3)[/tex]

where d is the average distance between molecules, V is the volume of the gas, and N is the number of gas molecules.

Since the density of the gas state is about "times less" than that of the liquid state, we can say that the density of the gas state is 1/ times that of the liquid state. This means that the volume of the gas must be times greater than the volume of the liquid, assuming the same number of molecules.

Let's call the diameter of a molecule "diameter" and assume that the substance in question is a monatomic gas (consisting of individual atoms). The volume of one molecule of a monatomic gas is approximately (4/3)π[tex](diameter/2)^3[/tex]. Therefore, the volume of N molecules is N times this volume, or N(4/3)π [tex](diameter/2)^3[/tex].

Since the volume of the gas is times greater than the volume of the liquid, we can say:

N(4/3)π [tex](diameter/2)^3[/tex] = times the volume of the liquid

Solving for N, we get:

N = ( times the volume of the liquid) / (4/3)π[tex](diameter/2)^3[/tex]

Substituting this expression for N into the formula for d, we get:

d = [times the volume of the liquid / (4/3)π [tex](diameter/2)^3]^(1/3)[/tex]

Simplifying this expression, we get:

d = [(3/4) times the volume of the liquid / π [tex](diameter/2)^3]^(1/3)[/tex]

We can see that d is proportional to the cube root of the volume of the liquid and inversely proportional to the cube root of the cube of the diameter of the molecule. Therefore, we can say that:

d ~ V^(1/3) / diameter

Plugging in the values from the answer choices, we find:

a. 1000d: d ~ [tex]V^(1/3)[/tex] / diameter = [tex](1000)^(1/3)[/tex]/ diameter = 10.0 / diameter

b. d: d ~ [tex]V^(1/3)[/tex] / diameter =[tex]1^(1/3)[/tex] / diameter = 1 / diameter

c. 10d: d ~[tex]V^(1/3)[/tex] / diameter = [tex](10)^(1/3)[/tex] / diameter = 2.15 / diameter

d. 100d: d ~ [tex]V^(1/3)[/tex] / diameter = [tex](100)^(1/3)[/tex] / diameter = 4.64 / diameter

e. 1000d: d ~ [tex]V^(1/3)[/tex]/ diameter = [tex](1000)^(1/3)[/tex] / diameter = 10.0 / diameter

The best estimate for the average distance between gas molecules is therefore b. d, or 1 diameter.

Learn more about average distance

https://brainly.com/question/3841552

#SPJ4

F-18 has a biological half-life of about 6 hours and a physical half-life of 1.83 hours, making its active half-life roughly 1.4 hours (7). Fluorine F 18 has a half-life is 109.7 minutes and decays by positron,(+) emission.

Positrons are released by this fluorine radioactive isotope. A radioactive version of glucose that's also easily absorbed by cancer cells as well as normal cells can be created using F-18. Nuclear imaging can be used to locate tumours, map brain activity, and identify other diseases.

A key source of positrons is the fluorine radioisotope fluorine-18 (18F). Its half-life was 109.771(20) minutes, and its mass is 18.0009380(6) u. 96% of the time, it decays via positron emission, and 4% by electron capture.

To know more about positron visit:

https://brainly.com/question/21275312

#SPJ1

Answer:  An isolated system is a thermodynamic system that cannot exchange either energy or matter outside the boundaries of the system.

Explanation:

The normality of acetic acid in this vinegar is 0.0422 N.

The balanced chemical equation for the reaction between acetic acid and sodium hydroxide is:

CH₃COOH + NaOH → NaCH₃COO + H₂O

From the equation, we can see that the mole ratio between acetic acid and sodium hydroxide is 1:1. So, the number of moles of NaOH used in the titration can be calculated as,

0.1113 N × 0.01746 L = 0.001944 moles NaOH

Since the mole ratio of acetic acid and NaOH is 1:1, the number of moles of acetic acid present in the 46.1 ml sample of vinegar is also 0.001944 moles.

The normality of acetic acid can be calculated using the formula:

Normality = (number of moles of solute) / (volume of solution in liters)

Normality = 0.001944 moles / 0.0461 L = 0.0422 N

To know more about vinegar, here

brainly.com/question/11530998

#SPJ4

For the bond between amino acids, you would add a label describing that it is  a covalent bond in proteins.

The bond between amino acids is a covalent bond known as a peptide bond, which forms when the carboxyl group of one amino acid reacts with the amino group of another amino acid. This reaction is called a dehydration reaction, as a water molecule is removed during the formation of the peptide bond.

Proteins are made up of long chains of amino acids joined together by peptide bonds. The sequence of amino acids determines the structure and function of the protein. The peptide bond is the backbone of the protein chain, which is made up of alternating carbon and nitrogen atoms with the attached amino acid side chains.

In contrast to a covalent bond, ionic bonds are formed when two atoms with opposite charges attract each other. In proteins, ionic bonds can form between the side chains of amino acids that have charged groups, such as lysine and arginine, and those with negatively charged groups, such as aspartic acid and glutamic acid. However, these ionic bonds are not involved in the formation of peptide bonds.

Similarly, hydrogen bonds, which are weak electrostatic interactions between a hydrogen atom and a negatively charged atom such as oxygen or nitrogen, are not involved in the formation of peptide bonds. Hydrogen bonds do play a role in stabilizing the structure of proteins, but they are not the primary type of bond involved in protein structure.

In carbohydrates, covalent bonds known as glycosidic bonds join monosaccharides (simple sugars) together to form polysaccharides (complex sugars), such as starch and cellulose. These covalent bonds are similar to peptide bonds in proteins in that they involve the loss of a water molecule during formation.

Therefore, the correct answer to the lab practical question is c. a covalent bond in proteins.

To know more about covalent bond, visit the link given below;

https://brainly.com/question/10777799

#SPJ4

Answer:

According to recent studies, the first layer of soil in the midwestern United States is being eroded at a rate 10 to 1000 times faster than it is forming. This alarming rate of soil erosion could have significant consequences for agriculture, ecosystems, and even the economy.

Soil erosion can have both direct and indirect effects on human societies. When topsoil is lost, the quality of the remaining soil is reduced, and this can have a significant impact on crop yields. Soil erosion can also contribute to water pollution as runoff carries with it excess nutrients and pesticides from the fields.

Additionally, soil erosion can cause severe damage to ecosystems. When topsoil is lost, the delicate balance of nutrients, microorganisms and other life forms is negatively impacted. This can lead to reduced biodiversity and degradation of the natural landscape.

In light of these findings, it is clear that more needs to be done to address the issue of soil erosion. This could include measures such as greater use of cover crops, conservation tillage practices, and other sustainable farming practices. These measures could help slow down or even stop the erosion of the topsoil.

In conclusion, soil erosion in the midwestern United States should be taken seriously. It is important to understand the causes and effects of soil erosion and to take proactive measures to protect our natural resources. By implementing sustainable farming practices, we can work towards the goal of ensuring that our soil remains productive and healthy for current and future generations.

It is crucial to carefully regulate the titration's endpoint since it might have a considerable impact on the computed percentage of acetic acid in a vinegar sample.

Titration is a typical laboratory procedure used to add a solution with a known concentration to an unknown solution until a chemical reaction is complete. Acetic acid is titrated using a standard solution of sodium hydroxide when using vinegar (NaOH). The solution will become too simple and the indicator will develop a dark pink hue if the titration is carried past the endpoint. This indicates that there has been an excessive amount of NaOH added to the solution, resulting in an underestimation of the proportion of acetic acid.

The solution will still be acidic if the titration is stopped before the endpoint, and the computed proportion of acetic acid will be excessively high. The endpoint of the titration will thus be indicated by a faint pink hue rather than a dark pink tint, hence it is crucial to titrate carefully and halt the titration at this point. This guarantees that the right quantity of NaOH was supplied and that the predicted acetic acid % is correct.

To learn more about titration, refer to:

https://brainly.com/question/186765

#SPJ4

Answer: Smokestacks are not a method to reduce the emissions of particulate matter.

Explanation: Smokestacks are the structures that release the emissions into the atmosphere. The other options listed - scrubbers, fluidized bed combustion, fabric filters, and electrostatic precipitators are all methods to reduce particulate matter emission.

The method that is not used to reduce the emissions of particulate matter is "Smokestacks".

Smokestacks are not a method to reduce the emissions of particulate matter. Smokestacks are the exhaust pipes in industries that emit the waste products into the atmosphere. Smokestacks are installed in the factories for the removal of flue gases produced during the combustion process.

Scrubbers, Fluidized bed combustion, Fabric filters, and Electrostatic precipitator are some methods used to reduce the emissions of particulate matter. These are explained below:

Scrubbers are used to eliminate acidic gases ([tex]SO_2[/tex] and NOx) as well as particulate matter from industrial flue gas. When flue gases enter a scrubber, they are exposed to a liquid solution that contains a base. [tex]SO_2[/tex] and NOx gases are neutralized as they pass through this solution, and particulate matter is trapped.

Fluidized bed combustion: In this method, the fuel is burned in a bed of inert particles at a high temperature, resulting in less NOx emissions and the release of less particulate matter into the atmosphere.

Fabric filters are used to filter out fine particles from flue gases by trapping them in woven filter bags. The bags are cleaned regularly to keep them functional.

Electrostatic precipitators use electrical charges to remove particulate matter from flue gases. Particles are ionized by a high-voltage electric field and then collected on oppositely charged plates, resulting in clean flue gas being released into the environment.

To know more about Smokestacks

brainly.com/question/30754998

#SPJ11

The pH of the solution is 2.46. It is important to note that the answer should have the correct number of significant digits, which in this case is three.

To calculate the pH of the solution, we need to first determine the concentration of the solution.

Concentration (M) = moles of solute (n) / volume of solution (V)Concentration of solution = 0.2500 mol / 2.500 L

= 0.100 M

Now that we have the concentration, we can calculate the pH of the solution by using the pH formula:

pH = -log [H+]

The concentration of H+ in the solution can be calculated using the ionization constant of perchloric acid.

Ka = [H+][ClO4-]/[HClO4]1.2 x 10^-2

= [H+]^2/[0.100 M]

Therefore, [H+] = 0.00347 M

Now we can substitute this value into the pH formula:

pH = -log (0.00347)

= 2.46

To learn more about: pH

https://brainly.com/question/12609985

#SPJ11

The solubility of a gas in a liquid is dependent on the partial pressure of the gas above the liquid, as stated in the third statement. However, the second statement is false because the solubility of a solute in a solvent typically increases as the strength of the attractive forces between the solute and solvent molecules increases, not decreases.

The statement "the weaker the attraction between the solute and solvent molecules, the greater the solubility" is false.

Solubility is a measure of how much of a solute can dissolve in a given amount of solvent at a certain temperature and pressure. The solubility of a solute depends on various factors such as the nature of the solute and solvent, temperature, pressure, and the intermolecular forces between them.

Generally, substances with similar intermolecular attractive forces tend to be soluble in one another, as stated in the first statement. Nonpolar liquids tend to be insoluble in polar liquids, as stated in the fourth statement.

Find out more about the solubility of a gas

brainly.com/question/14781271

#SPJ4

A thermodynamic state function is a value that is independent of a route. As a result, functions like as pressure, volume, and temperature are determined only by the state of a system and not by the path.

A thermodynamic potential, also known as a basic function, is a quantity used to indicate a system's state. Internal energy U, enthalpy H, Helmholtz free energy F, and Gibbs free energy G are our four fundamental functions.

State functions or point functions are properties whose value does not depend on the path followed to obtain that value. Path functions, on the other hand, are those functions that do depend on the path between two places.

learn more about thermodynamic state

https://brainly.com/question/26035962

#SPJ1

For a sample of saturated Ca(OH)₂, solution is titrated with 0.030 M HCl. The concentration (m) of the hydroxide ion is equals to the 0.04571 M.

We have a sample of a saturated Ca(OH)₂, solution is titrated with HCl. The balanced chemical reaction is written as

2HCl + Ca(OH)₂--> CaCl₂ + 2H₂O

or 2H⁺ + OH⁻ --> H₂O

that is two moles of HCl are needed in one mol of calcium hydroxide. Now,

Volume of Ca(OH)₂ = 25.0 mL

Molarity of HCl = 0.030

Volume of titrant (HCl) = 38.1 mL. Let the concentration of Ca(OH)₂ and HCl be C₁ and C₂. As we know that, in many cases concentration is considered as molarity ( mol/L). So, concentration of Ca(OH)₂ solution, C₁ = 0.030 mol/L. Equating H⁺ ions and hydroxide (OH⁻) ions, C₁ × V₁ ( Ca(OH)₂) = C₂ × V₂ (HCl)

Here, V₁ = 25 mL, V₂ = 38.1 mL

=> C₁ ×25 mL = 0.03 mol/L × 38.1 mL

=> C₁ = 0.04571 M

Then, concentration of OH⁻ ion is 0.04571 M. For, concentration of Ca(OH)₂ = 0.5× [OH⁻] = 0.5×0.04571 (mol = 1/2)

= 0.02285 M

Hence, concentration of both OH⁻ and Ca(OH)₂ are 0.04571 M and 0.02285 M.

For more information about concentration, visit :

https://brainly.com/question/30653246

#SPJ4

Ferns, club mosses, and horsetails are all vascular plants that reproduce by producing spores, and they share the following two characteristics:

Vascular tissue: These plants have specialized tissues for conducting water and nutrients throughout the plant. The vascular tissue is composed of xylem, which transports water and minerals from the roots to the rest of the plant, and phloem, which transports organic nutrients (such as sugars) from the leaves to the rest of the plant.

Spore production: These plants reproduce by producing spores, which are haploid (having one set of chromosomes) and can grow into new plants under favorable conditions.

In contrast, mosses are non-vascular plants that lack specialized tissues for conducting water and nutrients. Instead, they absorb water and nutrients directly from their surroundings through their leaves. Mosses also reproduce by producing spores, but they have a much simpler structure than ferns, club mosses, and horsetails. Mosses lack true roots, stems, and leaves, and they do not have a well-developed system for conducting water and nutrients throughout the plant.

To know more about minerals please refer:

https://brainly.com/question/5099156

#SPJ1

A shift from equilibrium can result by alteration of any of the following: pressure, composition, or temperature. Option d is correct.

When a system is at equilibrium, it means that the rates of the forward and reverse reactions are equal and there is no net change in the concentrations of the reactants and products. However, if any of the conditions that affect the equilibrium are altered, such as the pressure, composition, or temperature, the equilibrium may shift to a new state.

For example, increasing the pressure may shift the equilibrium to favor the side with fewer moles of gas, while increasing the temperature may favor the endothermic or exothermic reaction depending on the direction of heat flow. Similarly, changing the composition by adding or removing reactants or products can also affect the equilibrium position. These changes in the equilibrium can be predicted and analyzed using the principles of chemical equilibrium. Hence option d is correct choice.

To know more about equilibrium, here

brainly.com/question/29738952

#SPJ4

The concentration from which the diluted sample was taken is 150mg/dl. Thus Option D is the correct answer.

Given ,

Here we are using 1/30 ratio of transparent cuvette with respect to the  oxygen-acceptor solution that contains the crucial glucose oxidase these are necessary for the solution to work and the concentration to be detected.

The glucose concentration in the diluted sample is

(0.20/0.24) × 60. mg/dl = 5.0 mg/dl

Therefore,

The glucose concentration in blood is 30 × 5.0 mg/dl = 150 mg/dl

The concentration from which the diluted sample was taken is 150mg/dl. Thus Option D is the correct answer.

To learn more about concentration of glucose,

https://brainly.com/question/28850775

#SPJ4

The volume of a gas is directly proportional to its temperature when pressure and moles remain constant. As the temperature increases, the volume of nitrogen gas also increases. Hence, the correct option is (D) i.e. 5.59 L.

To solve this problem, we can use the combined gas law:

(P1V1)/T1 = (P2V2)/T2

where P is pressure, V is volume, and T is temperature. We can assume that the pressure remains constant, as the problem states that the container is flexible.

Given:

V1 = 5.00 L

T1 = 298 K

T2 = 333 K

We need to find V2 of nitorgen.

(P1V1)/T1 = (P2V2)/T2

V2 = (P1V1T2)/(P2T1)

We can assume that the pressure remains constant, so P1 = P2. Therefore, we can simplify the equation to:

V2 = (V1T2)/(T1)

V2 = (5.00 L)(333 K)/(298 K)

V2 = 5.59 L

Therefore, the correct option is (D) 5.59 L.

To know more about nitrogen please refer: https://brainly.com/question/13907528

#SPJ1

The standard reduction potential is a measure of the tendency of a species to gain electrons and undergo reduction. A higher reduction potential means that a species is more likely to undergo reduction.

The high standard reduction potential of F2 can be attributed to its small atomic size and high electronegativity. Fluorine has a strong attraction for electrons due to its high electronegativity, and its small atomic size allows it to tightly hold onto its valence electrons. As a result, F2 has a strong oxidizing power and a high tendency to accept electrons, leading to a high standard reduction potential.

On the other hand, the standard reduction potentials for alkali metals are negative due to their low electronegativity and large atomic size. Alkali metals have a strong tendency to lose their valence electrons due to their low electronegativity and relatively large atomic size, which makes their valence electrons more loosely bound. As a result, they have a low tendency to accept electrons, and their standard reduction potentials are negative.

It is also important to note that standard reduction potentials are measured under standard conditions, which may not reflect the behavior of the species in other environments. Factors such as the presence of other species, the pH, and the temperature can affect the behavior of species and their standard reduction potentials.

Learn more about Alkali metals here:

brainly.com/question/18153051

#SPJ4

if the volume decreases from 4.10 to 1.12 l against a constant pressure of 0.801 atm Then The work involved is 324.8 J

The change in volume is V₂ - V₁

∆V = 4.1 - 1.12 L

∆V = 2.98

∆V = 2.98 x 10⁻³ m³

∆V = 3 ×10⁻³ m³

The constant pressure is

p = 0.857 atm = 0.857*101325 Pa

p = 86836 Pa

By definition, the work done is

[tex]W = \int\limits pdV = 86836 \frac{N}{m²} * (3 ×10⁻³ m³)[/tex]

In physics, work is the energy transferred to or from an object via the application of force along a displacement. In its simplest form, for a constant force aligned with the direction of motion, the work equals the product of the force strength and the distance traveled. A force is said to do positive work if when applied it has a component in the direction of the displacement of the point of application. A force does negative work if it has a component opposite to the direction of the displacement at the point of application of the force.

Visit here to learn more about the work: https://brainly.com/question/6578814
#SPJ4

We need to add 17.78 mL of 1 M NaOH to 482.22 mL of 0.20 M HA to make 500 mL of a 0.20 M HA buffer with a pH of 5.25. The Henderson-Hasselbalch equation for a buffer is:

pH = pKa + log([A-]/[HA])

We are given that we want a pH of 5.25 and a pKa of 5.75 for the weak acid, HA. Let x be the volume of 1 M NaOH we need to add to the buffer.

First, we need to find the ratio of [A-]/[HA]:

10^(pH-pKa) = [A-]/[HA]

10^(5.25-5.75) = [A-]/[HA]

0.1778 = [A-]/[HA]

Next, we need to use the definition of molarity to find the moles of HA needed for the buffer:

M = moles / volume

0.20 M = moles / 0.5 L

moles = 0.1 mol HA

Since we know the ratio of [A-]/[HA], we can use this to find the moles of A- needed:

[A-] = 0.1778 [HA]

[A-] = 0.1778 mol/L * 0.1 L

[A-] = 0.01778 mol

Now we can use the definition of molarity again to find the volume of 1 M NaOH needed to add to the buffer:

M = moles / volume

1 M * x = 0.01778 mol

x = 0.01778 L = 17.78 mL

Therefore, we need to add 17.78 mL of 1 M NaOH to 482.22 mL of 0.20 M HA to make 500 mL of a 0.20 M HA buffer with a pH of 5.25.

Learn more about Henderson-Hasselbalch equation

https://brainly.com/question/13423434

#SPJ4

Methane (CH₄) plays the same role on Titan as water does on Earth, existing as gas, liquid, and solid.

On Earth, water exists as a gas (water vapor), liquid (water), and solid (ice) due to the planet's temperature and atmospheric pressure conditions. On Titan, the largest moon of Saturn, the role of water is replaced by methane. Methane exists as a gas in Titan's atmosphere, and due to the extremely low temperatures and high atmospheric pressure, it can also exist as a liquid and solid on the moon's surface.

Titan's atmosphere is primarily composed of nitrogen, with small amounts of methane, ethane, and other gases. The presence of methane and other hydrocarbons on Titan has led scientists to speculate about the possibility of life on the moon, although this has yet to be confirmed.

To know more about titan, here

brainly.com/question/31160630

#SPJ4

The balanced equation is written as

2HCl + Ca(OH)₂ --> CaCl₂+ 2H₂O. From using the mole ratio, the volume of 0.01154 M HCl needed to titrate 20.00 mL of 0.0125 M Ca(OH)₂ is equals to 43.3 mL.

Mole ratio is defined as a ratio between the number of moles of any two components in a balanced chemical reaction/equation. We have, two components Hydrochloric acid, HCl and calcium hydroxide, Ca(OH)₂ for reaction.

Volume of calcium hydroxide solution

V₁ = 20.00 mL = 0.020 L

Molarity of HCl, M₂ = 0.01154 M

Molarity of Ca(oh)₂, M₁ = 0.0125 M

Chemical reaction/equation for components,HCl + Ca(OH)₂-->CaCl₂+ H₂O

Balanced equation is written as

2HCl + Ca(OH)₂ --> CaCl₂+ 2H₂O

Now, mole ratio of HCl to Ca(OH)₂ is 2:1 that is moles of HCl are two times the mol of Ca(OH)₂ to form the respective products. Let V be the needed volume of hydrochloric acid to titrate Ca(OH)₂ solution. Using the molarity formula, Molarity of Ca(OH)₂ = moles of Ca(OH)₂/volume of Ca(OH)₂

=> 0.0125 mol/L = moles of Ca(OH)₂/0.02

=> moles of Ca(OH)₂ = 0.00025 moles

From mole ratio, moles of HCl are required to neutralize, Ca(OH)₂= 0.00025 moles Ca(OH)₂ (2 moles HCl/1 mole Ca(OH)₂ = 0.0005 moles

Now, using molarity formula for HCl,

M₂ = moles of HCl/Volume of HCl

=> 0.01154 Mol/L = 0.0005 moles/V

=> V = 0.0433 L = 43.3 mL ( 1L = 1000 mL).

Hence, required value of volume is 43.3 mL.

For more information about mole ratio, visit :

https://brainly.com/question/30632038

#SPJ4

Antoine Lavoisier proposed the Law of Conservation of Mass in 1789.

According to the mass conservation principle, mass in a closed system cannot be created or destroyed, but can only be transformed from one state to another. This means that the system's total mass stays constant over time, regardless of physical or chemical changes within the system.

This law is a fundamental principle in many branches of science, including chemistry and physics, and it has significant consequences for understanding how matter and energy behave in the universe. The idea of energy conservation is closely related to the law of conservation of mass, which says that the total amount of energy in a closed system is also conserved over time.

These laws, taken together, provide a framework for understanding the basic properties of matter and energy, as well as how they interact in the universe.

Learn more about the Law of Conservation of Mass:

https://brainly.com/question/19038178

The complete question :

Describe the Law of Conservation of Mass?

According to the law of conservation of mass, the statement that is always true about chemical reactions is: A) In a chemical reaction, matter is not created or destroyed, but is conserved.

A chemical reaction is the process in which one or more substances change into different substances. The starting substances are called reactants, and the substances that are produced are called products.

The law of conservation of mass states that in a chemical reaction, matter is not created or destroyed, but is conserved. This implies that the mass of the reactants is equal to the mass of the products. This law means that the amount of matter that exists before and after a chemical reaction is the same.

Hence, the correct option for the statement about chemical reactions that is always true according to the law of conservation of mass is A. In a chemical reaction, matter is not created or destroyed, but is conserved.

To know more about law of conservation of mass

brainly.com/question/13383562

#SPJ11

The number of covalent bonds generated by each atom in C, H, O, Cl, N, S, and P is as follows:

Covalent bonding occurs when atoms share electrons to achieve a more stable electron configuration. In general, elements that are close to each other on the periodic table tend to form covalent bonds, while elements that are far apart tend to form ionic bonds. Atoms can share one, two, or three pairs of electrons to form single, double, or triple covalent bonds, respectively. The number of electrons shared is determined by the number of electrons needed to achieve a stable configuration.

The number of covalent bonds formed by each of the atoms in C, H, O, Cl, N, S, and P depends on the number of valence electrons each atom has and the number of electrons needed to achieve a stable octet. These numbers are based on the octet rule, which states that atoms will bond in such a way as to achieve a stable electron configuration with a full valence shell of 8 electrons (or 2 electrons for hydrogen). Covalent bonding occurs when atoms share electrons to achieve this stable configuration.

The complete question is

If covalent bonding occurs because an atom wants to achieve an octet and therefore fill empty spaces in its orbital, how many covalent bonds would you think are formed by each of the atoms in C, H, O, Cl, N, S, and P?

To know more about the Bonding, here

https://brainly.com/question/26149387

#SPJ4

The correct answer is To calculate the pressure required to compress 198 L of air at 2.5 atm into a cylinder whose volume is 35 L, we can use the ideal gas law.

PV = nRT where P is the pressure, V is the volume, n is the number of moles of gas, R is the universal gas constant, and T is the temperature in Kelvin. Assuming that the temperature remains constant during compression, we can rearrange the equation to solve for the final pressure: P_final = (nRT) / V_final where V_final is the final volume of the compressed air. First, we need to calculate the initial number of moles of air: n_initial = (P_initial * V_initial) / (RT) where P_initial is the initial pressure, V_initial is the initial volume, and R is the universal gas constant. Since we know the initial volume and pressure, we can plug in the values and solve for n_initial: n_initial = (2.5 atm * 198 L) / (0.0821 L·atm/mol·K * 298 K) n_initial = 20.3 mol Next, we can use the ideal gas law again to calculate the final pressure: P_final = (n_initial * R * T) / V_final where T is the constant temperature in Kelvin. Assuming the temperature is 298 K, and the final volume is 35 L, we can plug in the values and solve for P_final: P_final = (20.3 mol * 0.0821 L·atm/mol·K * 298 K) / 35 L P_final = 3.0 atm Therefore, the pressure required to compress 198 L of air at 2.5 atm into a cylinder whose volume is 35 L is 3.0 atm.

To learn more about gas law click on the link below:

brainly.com/question/27009857

#SPJ1

According to Graham's law of effusion, the rate of effusion of a gas is inversely proportional to the square root of its molar mass. That is:

rate of effusion ∝ 1/√M

where M is the molar mass of the gas.

Let's assume that the molar mass of CO2 is M1 and the molar mass of the product gas is M2. We can express the ratio of their effusion rates as:

M2/M1 = (rate of effusion of CO2) / (rate of effusion of the product gas)

M2/M1 = (1/1.63)^2 (since the product gas took 1.63 times as long to effuse as CO2)

M2/M1 = 0.376

We know that the molar mass of CO2 is 44 g/mol. Therefore, we can solve for the molar mass of the product gas:

M2 = M1 x 0.376

M2 = 44 g/mol x 0.376

M2 = 16.544 g/mol

So the molar mass of the product gas is approximately 16.5 g/mol.

To know more about gas click here

brainly.com/question/14812509

#SPJ4

The mixture's final temperature is 62.8°C.

The specific heat of water is 4.184 J/g-K due to the fact that there are 4.184 joules in a calorie. The molar heat capacity of a substance—the amount of heat required to increase the temperature of one mole of the substance by either 1oC or 1K—can also be used to characterise how easily it gains or loses heat.

Q = mcΔT

Q hot = -Q cold

where Q hot is the heat lost by the hot water, and Q cold is the heat gained by the cold water.

Using the equation above, we can write:

m hot * c water * (T final - T hot) = -m cold * c water * (T final - Tcold)

where m hot is the mass of the hot water, m cold is the mass of the cold water, c water is the specific heat capacity of water, T hot is the initial temperature of the hot water, T cold is the initial temperature of the cold water, and T final is the final temperature of the mixture.

Substituting the given values, we get:

(6.0x102 g) * (1 cal/g°C) * (T final - 90.0°C) = -(4.00x102 g) * (1 cal/g°C) * (T final - 22.0°C)

Simplifying and solving for T_final, we get:

T final = (m hot * T hot + m cold * T cold) / (m hot + m cold)

T final = [(6.0x102 g) * (90.0°C) + (4.00x102 g) * (22.0°C)] / (6.0x102 g + 4.00x102 g)

T final = (54000 + 8800) / 1000

T final = 62.8°C

To know more about temperature visit:-

https://brainly.com/question/11050215

#SPJ1

Answer:

The "global carbon budget" model shows the causes and amounts of carbon flux into and out of the carbon cycle.