Answer:
We can use the formula:
q = mcΔT
where q is the heat transferred, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.
The heat transferred from the gold bar to the water is equal to the heat transferred from the water to the gold bar, since they reach thermal equilibrium. Therefore:
q_gold = q_water
We can solve for the temperature change of the gold bar:
q_gold = mcΔT_gold
q_water = mcΔT_water
Since the heat transferred is equal:
mcΔT_gold = mcΔT_water
Rearranging and solving for ΔT_gold:
ΔT_gold = ΔT_water(m_water/m_gold)
ΔT_water is the temperature change of the water, which is 17°C. m_water is 0.220 kg, and m_gold is 3 kg. c_gold is given as 129 J/kg K.
ΔT_gold = 17°C(0.220 kg/3 kg)(1/129 J/kg K) = 0.025°C
Therefore, the temperature change of the gold bar is 0.025°C when it is placed into 0.220 kg of water and thermal equilibrium is reached.
Imagine that scientists placed a satellite at the Earth-Moon L1 Lagrangian
point, which is a point between Earth and the Moon where the gravitational
pulls from the two bodies are equal and opposite. What would happen if a
satellite at this position drifted slightly closer to Earth?
O A.
A. The gravitational pull from the Moon would correct the satellite
and bring it back to the Lagrangian point.
OB. The satellite would stop drifting and would remain fixed in this
position because of its tangential velocity.
OC. The satellite would continue to drift toward Earth as Earth's pull
became stronger than that of the Moon.
OD. The gravitational pull from the Sun would eventually pull the
satellite from this point and cause it to directly orbit the Sun.
Answer:
Explanation:
A. The gravitational pull from the Moon would correct the satellite and bring it back to the Lagrangian point.
At the Earth-Moon L1 Lagrangian point, the gravitational pulls from the Earth and the Moon are balanced, and the satellite is in a stable equilibrium. If the satellite drifted slightly closer to Earth, the gravitational pull from the Earth would become stronger, but the gravitational pull from the Moon would also increase due to its closer distance, and this would correct the satellite's motion and bring it back to the Lagrangian point.
On the same object as in the previous question, you have to pus
with 15 N to move it 10 meters. How much work do you do?
Answer:
150 J
Explanation:
To find the work done by pushing the object with a force of 15 N over a distance of 10 meters, we can use the equation:
Work = Force × Distance × cos(θ)
Where:
Force is the applied force (15 N)
Distance is the distance over which the force is applied (10 m)
θ is the angle between the force vector and the direction of motion. In this case, we assume that the force is applied in the same direction as the motion, so θ = 0 degrees, and cos(θ) = 1.
Substituting the given values:
Work = 15 N × 10 m × cos(0) = 150 J
.
A net force of 32 N acting upon a wooden block produces an acceleration of 4.0 m/s2 for the block. What is the mass of the block?
The mass of the block is 8 kg.
StepsWhen the force exerted on an item and its acceleration are known, the mass of the object can be calculated using the formula
mass = force/acceleration.
It is derived from the second law of motion, which states that an object's acceleration is inversely proportional to its mass and directly proportional to the force acting on it. So, using this formula, we can determine an object's mass if we know its force and acceleration.
We can use the formula:
F = ma
where F is the net force, m is the mass of the block, and a is the acceleration.
We know that the net force is 32 N and the acceleration is 4.0 m/s². Substituting these values into the formula, we get:
32 N = m × 4.0 m/s².
Solving for m, we divide both sides of the equation by 4.0 m/s².
m = 32 N / 4.0 m/s².
m = 8 kg
Therefore, the mass of the block is 8 kg.
learn more about force here
https://brainly.com/question/12970081
#SPJ1
A body moving at 50m/s decelerates uniformly at 2/ms? until it comes to rest. What distance does it cover from the time it starts to decelerate to the time it comes to rest.
Answer:
625
Explanation:
To solve this problem, we can use the following kinematic equation:
v^2 = u^2 + 2as
Where:
v = final velocity (0 m/s since the body comes to rest)
u = initial velocity (50 m/s)
a = acceleration (-2 m/s^2 since the body is decelerating)
s = distance
We want to find the distance (s) that the body covers from the time it starts to decelerate to the time it comes to rest. We can rearrange the equation to solve for s:
s = (v^2 - u^2) / (2a)
Substituting the values we have:
s = (0^2 - 50^2) / (2 x (-2)) = 625 meters
Therefore, the body covers a distance of 625 meters from the time it starts to decelerate until it comes to rest.
A swing made from a 5 m rope and a 3 kg seat falls a vertical distance of 6 m from the highest point to the lowest point. Calculate the kinetic energy of the seat at the lowest point.
At the lowest position, both potential and kinetic energy are zero and maximal. A amount of energy is affected or not by mass.
Where do the kinetic energy's peak and trough locations lie?Kinetic energy (KE) is defined as the energy a object has due to its motion and therefore is equal with one the item's mass multiplied by the object's velocity squared (mv2). In a roller coaster, kinetic energy is highest at the bottom and lowest at the top.
How do you determine the bottom's kinetic energy?Kinetic energy has the following formula: K.E. (= 1/2 m v2, where m is the object's mass and v is its square velocity. The kinetic energy is measured in kgs squared per indication of the number if the mass is measured in kilogrammes and the velocity is measured in metres per second.
To know more about mass visit:
https://brainly.com/question/6782334
#SPJ1
please Help me.......
do these action and reaction start from same point?
Answer:
Yes
Explanation:
because its literally showing they are moving away from the same point
The three small spheres shown in the figure (Figure 1)carry charges q1= 4.45 nC , q2=-7.50 nC , and q3= 2.15 nC
A)Find the net electric flux through the closed surface S1
shown in cross section in the figure.
B)Find the net electric flux through the closed surface S2
shown in cross section in the figure.
C)Find the net electric flux through the closed surface S3
shown in cross section in the figure.
D)Find the net electric flux through the closed surface S4
shown in cross section in the figure.
E)Find the net electric flux through the closed surface S5
shown in cross section in the figure.
A) The net electric flux through the closed surface S₁ is given by the equation: Net electric flux = q1/4πε0
= 4.45 nC / (4π x 8.85 x 10-12 C2/Nm2)
= 0.541 x 10-3 Nm2/C .
Electricity is a form of energy that exists in nature and is created through the movement of electrons between atoms. It is the force that powers all of the electrical appliances and devices in our homes and offices.
B) The net electric flux through the closed surface S₂ is given by the equation:
Net electric flux = q1/4πε0 + q2/4πε0
= (4.45 nC + (-7.50 nC)) / (4π x 8.85 x 10-12 C2/Nm2)
= -2.05 x 10-3 Nm2/C
C) The net electric flux through the closed surface S₃ is given by the equation:
Net electric flux = q1/4πε0 + q2/4πε0 + q3/4πε0
= (4.45 nC + (-7.50 nC) + 2.15 nC) / (4π x 8.85 x 10-12 C2/Nm2)
= -0.239 x 10-3 Nm2/C
D) The net electric flux through the closed surface S₄ is given by the equation:
Net electric flux = q1/4πε0 + q2/4πε0 + q3/4πε0 + q1/4πε0
= (4.45 nC + (-7.50 nC) + 2.15 nC + 4.45 nC) / (4π x 8.85 x 10-12 C2/Nm2)
= 0.302 x 10-3 Nm2/C
E) The net electric flux through the closed surface S₅ is given by the equation:
Net electric flux = q1/4πε0 + q2/4πε0 + q3/4πε0 + q1/4πε0 + q2/4πε0
= (4.45 nC + (-7.50 nC) + 2.15 nC + 4.45 nC + (-7.50 nC)) / (4π x 8.85 x 10-12 C2/Nm2)
= -1.75 x 10-3 Nm2/C.
To learn more about electric
https://brainly.com/question/1100341
#SPJ1
A) The net electric flux through the closed surface S₁ is given by the equation: Net electric flux = q1/4πε0
= 4.45 nC / (4π x 8.85 x 10⁻¹² C²/Nm²)
= 0.541 x 10⁻³ Nm²/C .
What is electricity?Electricity is a form of energy that exists in nature and is created through the movement of electrons between atoms. It is the force that powers all of the electrical appliances and devices in our homes and offices.
B) The net electric flux through the closed surface S₂ is given by the equation:
Net electric flux = q1/4πε0 + q2/4πε0
= (4.45 nC + (-7.50 nC)) / (4π x 8.85 x 10⁻¹² C²/Nm²)
= -2.05 x 10⁻³ Nm²/C
C) The net electric flux through the closed surface S₃ is given by the equation:
Net electric flux = q1/4πε0 + q2/4πε0 + q3/4πε0
= (4.45 nC + (-7.50 nC) + 2.15 nC) / (4π x 8.85 x 10⁻¹² C²/Nm²)
= -0.239 x 10⁻³ Nm2/C
D) The net electric flux through the closed surface S₄ is given by the equation:
Net electric flux = q1/4πε0 + q2/4πε0 + q3/4πε0 + q1/4πε0
= (4.45 nC + (-7.50 nC) + 2.15 nC + 4.45 nC) / (4π x 8.85 x 10-12 C²/Nm²)
= 0.302 x 10⁻³ Nm²/C
E) The net electric flux through the closed surface S₅ is given by the equation:
Net electric flux = q1/4πε0 + q2/4πε0 + q3/4πε0 + q1/4πε0 + q2/4πε0
= (4.45 nC + (-7.50 nC) + 2.15 nC + 4.45 nC + (-7.50 nC)) / (4π x 8.85 x 10⁻¹² C²/Nm²)
= -1.75 x 10⁻³ Nm²/C.
To learn more about electricity, visit:
brainly.com/question/1100341
#SPJ1
Projectile Motion Practice Problems (horizontal and at an angle)
1. Josh kicks a soccer ball with a velocity of 15 m/s at an angle of 38° above the
horizontal.
a. What are the X and Y components of his velocity?
b. How long is the ball in the air?
c. How far will the ball go?
Answer:
Explanation:
a. The X and Y components of the velocity can be found using trigonometry:
X = V * cos(θ) = 15 m/s * cos(38°) ≈ 11.63 m/s
Y = V * sin(θ) = 15 m/s * sin(38°) ≈ 9.14 m/s
b. The time the ball is in the air can be found using the Y component of the velocity and the acceleration due to gravity:
Y = V * sin(θ) * t - (1/2) * g * t^2
where g = 9.8 m/s^2 is the acceleration due to gravity
Solving for t, we get:
t = 2 * Y / g ≈ 1.87 s
c. The distance the ball travels can be found using the X component of the velocity and the time in the air:
distance = X * time = 11.63 m/s * 1.87 s ≈ 21.78 m
Two very large, nonconducting plastic sheets, each 10.0 cm
thick, carry uniform charge densities σ1,σ2,σ3
and σ4
on their surfaces, as shown in the following figure(Figure 1). These surface charge densities have the values σ1 = -7.30 μC/m2 , σ2=5.00μC/m2, σ3= 1.90 μC/m2 , and σ4=4.00μC/m2. Use Gauss's law to find the magnitude and direction of the electric field at the following points, far from the edges of these sheets.
A:What is the magnitude of the electric field at point A , 5.00 cm
from the left face of the left-hand sheet?(Express your answer with the appropriate units.)
B:What is the direction of the electric field at point A, 5.00 cm
from the left face of the left-hand sheet?(LEFT,RIGHT,UPWARDS,DOWNWARDS)
C:What is the magnitude of the electric field at point B, 1.25 cm
from the inner surface of the right-hand sheet?(Express your answer with the appropriate units.)
D:What is the direction of the electric field atpoint B, 1.25 cm
from the inner surface of the right-hand sheet?(LEFT,RIGHT,UPWARDS,DOWNWARDS)
E:What is the magnitude of the electric field at point C , in the middle of the right-hand sheet?(Express your answer with the appropriate units.)
F:What is the direction of the electric field at point C, in the middle of the right-hand sheet?(LEFT,RIGHT,UPWARDS,DOWNWARDS)
Answer:
Explanation:
To use Gauss's Law, we need to choose a Gaussian surface that encloses the point of interest and has symmetry such that the electric field is constant over the surface. For all points in this problem, we can choose a cylinder as our Gaussian surface with its axis perpendicular to the sheets.
Let's assume that the cylinders are tall enough such that the electric field at the top and bottom faces of the cylinder is negligible. The electric flux through the curved part of the cylinder is constant and equal to Φ_E = E*A, where A is the surface area of the curved part of the cylinder.
Using Gauss's Law, Φ_E = Q_in / ε0, where Q_in is the net charge enclosed by the Gaussian surface and ε0 is the permittivity of free space.
A: The Gaussian surface is a cylinder with radius r = 5.00 cm and height h = the distance between the sheets (20.0 cm). The net charge enclosed is Q_in = σ1 * A_top + σ2 * A_bottom, where A_top and A_bottom are the areas of the top and bottom faces of the cylinder, respectively. Since the electric field is perpendicular to the faces, the flux through them is zero. So, Q_in = (σ1 - σ2) * A, where A is the surface area of the curved part of the cylinder. Thus,
Φ_E = E * A = Q_in / ε0
E = (σ1 - σ2) / (ε0 * r) = (-7.30 μC/m^2 - 5.00 μC/m^2) / (8.85 x 10^-12 C^2/Nm^2 * 0.0500 m) = -2.31 x 10^5 N/C
The magnitude of the electric field at point A is 2.31 x 10^5 N/C.
B: The electric field points from higher potential to lower potential. Since the left-hand sheet has a negative charge density and the right-hand sheet has a positive charge density, the potential decreases from left to right. Thus, the electric field at point A points from left to right.
The direction of the electric field at point A is RIGHT.
C: The Gaussian surface is a cylinder with radius r = 1.25 cm and height h = the thickness of the right-hand sheet (10.0 cm). The net charge enclosed is Q_in = σ4 * A, where A is the surface area of the curved part of the cylinder. Thus,
Φ_E = E * A = Q_in / ε0
E = σ4 / (ε0 * r) = 4.00 μC/m^2 / (8.85 x 10^-12 C^2/Nm^2 * 0.0125 m) = 3.77 x 10^7 N/C
The magnitude of the electric field at point B is 3.77 x 10^7 N/C.
D: The electric field points from higher potential to lower potential. Since the right-hand sheet has a positive charge density, the potential decreases from the right-hand sheet to the left. Thus, the electric field at point B points from right to left.
The direction of the electric field at point B is LEFT.
E:
Since point C is in the middle of the right-hand sheet, the electric field due to this sheet alone cancels out due to symmetry. Thus, the only electric field present is due to the left-hand sheet. The Gaussian surface is a cylinder with radius r = the radius of the sheet (10.0 cm) and height h = the thickness of the sheet (10.0 cm). The net charge enclosed is Q
The net charge enclosed within this Gaussian surface is:
Q = σ1 × (2πrh)
where h is the thickness of the left-hand sheet, r is the distance from the left-hand sheet to point C, and σ1 is the surface charge density of the left-hand sheet. Plugging in the given values, we get:
Q = (-7.30 × 10^-6 C/m^2) × (2π × 0.1 m × 0.1 m) = -4.60 × 10^-8 C
Using Gauss's law, we can find the electric field at point C:
E × (2πrh) = Q/ε0
where ε0 is the permittivity of free space. Solving for E, we get:
E = Q / (2πε0rh)
Plugging in the values, we get:
E = (-4.60 × 10^-8 C) / (2π × 8.85 × 10^-12 C^2/(N·m^2) × 0.1 m × 0.1 m) = -1.64 × 10^5 N/C
Therefore, the magnitude of the electric field at point C is 1.64 × 10^5 N/C.
To find the electric field at point C, we need to consider both sheets since point C is equidistant from both sheets. Thus, we can use Gauss's law to find the total electric field due to both sheets.
The net charge enclosed by a cylindrical Gaussian surface of radius r = 1.25 cm and height h = 20.0 cm is given by:
qenc = σ2 * (2πrh) + σ4 * (2πrh) = (σ2 + σ4) * (2πrh)
where σ2 is the charge density on the inner surface of the right-hand sheet, σ4 is the charge density on the outer surface of the left-hand sheet, and h is the distance between the two sheets.
Substituting the given values, we get:
qenc = (5.00 μC/m^2 + 4.00 μC/m^2) * (2π * 1.25 cm * 20.0 cm) = 628.32 nC
Using Gauss's law, we have:
E * 2πrh = qenc/ε0
where ε0 is the permittivity of free space.
Solving for E, we get:
E = qenc / (2πrhε0) = 2.22 × 10^4 N/C
Therefore, the magnitude of the electric field at point C is 2.22 × 10^4 N/C.
F:
The direction of the electric field at point C is perpendicular to the surface of the sheet, pointing away from the positive charge density and towards the negative charge density. Since the positive charge density is on the outer surface of the left-hand sheet and the negative charge density is on the inner surface of the right-hand sheet, the direction of the electric field at point C is from left to right. Therefore, the direction of the electric field at point C is RIGHT.
The net flux of an electric field in a closed surface is directly proportionate to the charge contained, according to Gauss' equation.
State Gauss’s lawTo use Gauss's Law, we need to choose a Gaussian surface that encloses the point of interest and has symmetry such that the electric field is constant over the surface. For all points in this problem, we can choose a cylinder as our Gaussian surface with its axis perpendicular to the sheets.
Let's assume that the cylinders are tall enough such that the electric field at the top and bottom faces of the cylinder is negligible. The electric flux through the curved part of the cylinder is constant and equal to Φ_E = E*A, where A is the surface area of the curved part of the cylinder.
Using Gauss's Law, Φ_E = Q_in / ε0, where Q_in is the net charge enclosed by the Gaussian surface and ε0 is the permittivity of free space.
A: The Gaussian surface is a cylinder with radius r = 5.00 cm and height h = the distance between the sheets (20.0 cm). The net charge enclosed is Q_in = σ1 * A_top + σ2 * A_bottom, where A_top and A_bottom are the areas of the top and bottom faces of the cylinder, respectively.
Φ_E = E * A = Q_in / ε0
E = (σ1 - σ2) / (ε0 * r) = (-7.30 μC/m^2 - 5.00 μC/m^2) / (8.85 x 10^-12 C^2/Nm^2 * 0.0500 m) = -2.31 x 10^5 N/C
The magnitude of the electric field at point A is 2.31 x 10^5 N/C.
B: The electric field points from higher potential to lower potential. Since the left-hand sheet has a negative charge density and the right-hand sheet has a positive charge density, the potential decreases from left to right. Thus, the electric field at point A points from left to right.
The direction of the electric field at point A is RIGHT.
C: The Gaussian surface is a cylinder with radius r = 1.25 cm and height h = the thickness of the right-hand sheet (10.0 cm). The net charge enclosed is Q_in = σ4 * A, where A is the surface area of the curved part of the cylinder. Thus,
Φ_E = E * A = Q_in / ε0
E = σ4 / (ε0 * r) = 4.00 μC/m^2 / (8.85 x 10^-12 C^2/Nm^2 * 0.0125 m) = 3.77 x 10^7 N/C
The magnitude of the electric field at point B is 3.77 x 10^7 N/C.
D: The electric field points from higher potential to lower potential. Since the right-hand sheet has a positive charge density, the potential decreases from the right-hand sheet to the left. Thus, the electric field at point B points from right to left.
The direction of the electric field at point B is LEFT.
E:Since point C is in the middle of the right-hand sheet, the electric field due to this sheet alone cancels out due to symmetry. Thus, the only electric field present is due to the left-hand sheet. The Gaussian surface is a cylinder with radius r = the radius of the sheet (10.0 cm) and height h = the thickness of the sheet (10.0 cm). The net charge enclosed is Q
The net charge enclosed within this Gaussian surface is:
Q = σ1 × (2πrh)
where h is the thickness of the left-hand sheet, r is the distance from the left-hand sheet to point C, and σ1 is the surface charge density of the left-hand sheet. Plugging in the given values, we get:
Q = (-7.30 × 10^-6 C/m^2) × (2π × 0.1 m × 0.1 m) = -4.60 × 10^-8 C
Using Gauss's law, we can find the electric field at point C:
E × (2πrh) = Q/ε0
where ε0 is the permittivity of free space. Solving for E, we get:
E = Q / (2πε0rh)
Plugging in the values, we get:
E = (-4.60 × 10^-8 C) / (2π × 8.85 × 10^-12 C^2/(N·m^2) × 0.1 m × 0.1 m) = -1.64 × 10^5 N/C
Therefore, the magnitude of the electric field at point C is 1.64 × 10^5 N/C.
To find the electric field at point C, we need to consider both sheets since point C is equidistant from both sheets. Thus, we can use Gauss's law to find the total electric field due to both sheets.
The net charge enclosed by a cylindrical Gaussian surface of radius r = 1.25 cm and height h = 20.0 cm is given by:
qenc = σ2 * (2πrh) + σ4 * (2πrh) = (σ2 + σ4) * (2πrh)
where σ2 is the charge density on the inner surface of the right-hand sheet, σ4 is the charge density on the outer surface of the left-hand sheet, and h is the distance between the two sheets.
Substituting the given values, we get:
qenc = (5.00 μC/m^2 + 4.00 μC/m^2) * (2π * 1.25 cm * 20.0 cm) = 628.32 nC
Using Gauss's law, we have:
E * 2πrh = qenc/ε0
where ε0 is the permittivity of free space.
Solving for E, we get:
E = qenc / (2πrhε0) = 2.22 × 10^4 N/C
Therefore, the magnitude of the electric field at point C is 2.22 × 10^4 N/C.
F:The direction of the electric field at point C is perpendicular to the surface of the sheet, pointing away from the positive charge density and towards the negative charge density. Since the positive charge density is on the outer surface of the left-hand sheet and the negative charge density is on the inner surface of the right-hand sheet, the direction of the electric field at point C is from left to right. Therefore, the direction of the electric field at point C is RIGHT.
Learn more about Gauss's law
https://brainly.com/question/14767569
#SPJ1
Help pls for some reason here’s my problem when I look at my iPad to much and I look at something far away it’s kinda blurry but when I rest my eyes by not looking at the screen it’s kinda gets better this has been happening for a month
Answer: Hello! I believe you might have a condition known as Digital Eye Strain (DES). This is cause by too much screen time, poor posture, bad lighting and viewing distance.
Before you panic, this is not permanent. Here’s some ways to help prevent it :
• Put the screen 20-28 inches away, 4-5 in below eye level and adjust your brightness. (Make sure your screen isn’t too bright)
•Rest your eyes for 15 minutes every 2 hours.
•Try the 20-20-20 rule: look at an object 20 ft away for 20 seconds every 20 minutes.
Please rest your eyes more. If it doesn’t go away after a bit. Please book a appointment with your eye doctor to make sure everything’s alright :)
let me know if you have any questions! :)
What are the magnitude and the direction of the electric field that will allow an electron to fall with an acceleration of 4.3 m/s2?
Answer:
Explanation:
The acceleration of an electron in an electric field is given by the equation:
a = qE/m
where a is the acceleration, q is the charge of the electron, E is the electric field, and m is the mass of the electron.
Given that the acceleration of the electron is 4.3 m/s^2, and the mass of the electron is 9.11 × 10^-31 kg, and the charge of the electron is -1.6 × 10^-19 C, we can solve for the electric field E:
E = ma/q
E = (4.3 m/s^2) × (9.11 × 10^-31 kg) / (-1.6 × 10^-19 C)
E = -2.44 × 10^4 N/C
The negative sign indicates that the direction of the electric field is opposite to the direction of the electron's motion. Therefore, the magnitude of the electric field required to accelerate an electron with an acceleration of 4.3 m/s^2 is 2.44 × 10^4 N/C and the direction is opposite to the direction of motion of the electron.
does kinetic friction speed up or slow down an object? Therefore, which type of work iis done by kinetic friction?
Answer:
Speed up, friction is the force applied when slowing down.
It would be positive work because an applied force would cause an object to displace and go into a certain direction sending it into a state of motion, hence generating kinetic energy.
What is kinetic energy?
In the ordinary sense, the kinetic energy of a body is the energy that it possesses by virtue of its motion. In fact it is equal to the work that a moving body can do before coming to rest. In other words, it is equal to the amount of work required to stop a moving body.
Using the elementary third equation of motion and Newton's second law, the kinetic energy of a body of mass m and velocity v is given by the simple mathematical relation:
[tex]K=\frac{mv^2}{2}[/tex]
But this identity holds good provided that the body moves with a velocity much smaller than the velocity of light in vacuum.
Now what happens if the velocity of the body is sufficiently large?
From the expression from the relativistic linear momentum of a body of rest mass [tex]m_0[/tex] moving with velocity [tex]v[/tex] is given by
p=m0v1−v2c2−−−−−−√=m0γv
∴K=∫vd(m0γv)
=v.m0γv−∫m0γvdv
=m0γv2−m0∫vdv1−v2/c2−−−−−−−−√
Let u=1−v2/c2⟹du=−2vc2dv
∴K=m0γv2+m0c22∫du√u
=(m0v2+m0c2(1−v2c2))γ−E0
K=m0γc2−E0
Now if the magnitude of velocity is zero, then the above equation takes the form
0=m0c2−E0⟹E0=m0c2
So finally the kinetic energy of a body is given by the general relation:
K=m0γc2−m0c2=m0c2(γ−1)
Now if the velocity is small enough, then this equation closely approximates the classical relation for kinetic energy which can be ensured by expanding γ
by the binomial theorem.
Which answer represents a list of UNBALANCED forces?
A group of people playing tug of war, where one side has two small children, and
the other side has two large adults: A motorcycle that is accelerating; A ball that
is decelerating as it rolls.
A skateboard sitting on a sidewalk; A car moving at a constant speed: Two
people pushing on a box with equal force
A person sitting in a chair: A train moving at a constant speed; a wagon being
pulled with 5 N of force from each direction.
The response that enumerates the unbalanced forces is a bunch of people playing tug-of-war with two young children on one side and two huge adults on the other.
Is the force used in tug of war balanced or unbalanced?In a tug of war, if both teams are applying the same amount of force on the rope, balanced forces are displayed. The forces pulling on the rope are opposing in direction and of equal magnitude.
What's an illustration of an imbalanced force?The imbalanced soldiers are acting onto the football if you kick it and it goes from one area to another. After being kicked, the ball goes from one location to another. An illustration of an uneven force is this.
To know more about unbalanced forces visit:-
https://brainly.com/question/29769471
#SPJ1
Convert the BCD number given to its Excess-3 equivalent: 1001 0011 1000.
To convert a BCD number to Excess-3, we add 3 to each BCD digit.
The BCD number given is: 1001 0011 1000
Adding 3 to each digit, we get:
1011 0100 1111
Therefore, the Excess-3 equivalent of the given BCD number is: 1011 0100 1111.
How smart is Albert Einstein?
Albert Einstein was one of the greatest physicists of all time and is widely considered a genius. He made groundbreaking contributions to our understanding of the universe, including the theory of relativity and the famous equation E=mc².
Einstein's intelligence can be seen in his early academic achievements. He excelled in math and physics, and by the age of 16, he was already doing advanced physics research on his own. He went on to earn a PhD and made significant contributions to physics, publishing numerous papers and developing revolutionary theories.
Moreover, his ability to think creatively and critically is evidenced by his approach to problem-solving. He was known for his thought experiments, which allowed him to explore complex concepts and theories without the need for expensive equipment or experiments. He was also skilled at developing intuitive and elegant solutions to complex problems.
Therefore Einstein's intelligence is widely recognized and respected by scientists, scholars, and the general public alike. He is considered one of the most brilliant minds in history and has made a lasting impact on our understanding of the universe.
To learn more about the theory of relativity click:
https://brainly.com/question/364776
#SPJ1
Why would theoretical muzzle velocity be lower than measured muzzle velocity?
Answer:
Explanation:
Theoretical muzzle velocity is calculated based on various physical models and assumptions, such as the conservation of energy and momentum, the properties of the propellant and barrel, and other factors that can affect the velocity of the projectile as it exits the muzzle of the firearm. However, in practice, there can be many factors that can influence the actual velocity of the projectile, which can result in a measured muzzle velocity that is higher than the theoretical value. Some possible reasons for this discrepancy include:
Variation in propellant burn rate: Theoretical models assume a constant burn rate for the propellant, but in practice, there can be variations in the rate at which the propellant burns due to differences in temperature, humidity, and other factors. This can affect the velocity of the projectile as it exits the muzzle.
Barrel condition: Theoretical models assume a perfectly smooth, straight barrel, but in practice, barrels can have imperfections such as rough spots or bends that can affect the velocity of the projectile as it travels through the barrel.
Environmental factors: Theoretical models assume ideal conditions, but in practice, there can be factors such as wind, temperature, and humidity that can affect the velocity of the projectile as it travels through the air.
Measurement errors: Measuring the muzzle velocity of a projectile can be challenging, and errors in measurement can result in a measured velocity that is higher than the actual value.
Human error: Human factors such as shooter error, inconsistency in handling and loading the firearm, and other factors can also contribute to discrepancies between theoretical and measured muzzle velocities.
Overall, while theoretical muzzle velocity can provide a useful estimate of the velocity of a projectile exiting a firearm, there are many factors that can influence the actual velocity in practice, leading to measured velocities that are higher than the theoretical value.