What is the reaction time for someone who lets 7 inches fall on a meter stick before the catch it?

A. 1.0 s
B. 0.19 s
C. 0.33 s
D. 0.08 s

Show the work for determining the reaction time of the person...show symbolic solution then numerical solution.

The power lens necessary to correct this person's vision to allow her to see distant objects is +4.0 D. The correct option is c.

A lens is a transparent optical device that refracts light to converge or diverge it. To form an image, lenses use a principle known as refraction. Refraction is the bending of light when it travels from one medium to another of differing density.

A convex lens, for example, is used to focus the image for those who suffer from hyperopia, also known as long-sightedness, or those who have difficulty seeing objects that are far away. It is a positive lens since it can refract parallel rays of light to meet at a focal point.

In summary, the power lens necessary to correct this person's vision to allow her to see distant objects is +4.0 D.

Here you can learn more about power lens

https://brainly.com/question/29178301#

#SPJ11  

A 3.5 L container of oxygen gas kept at 6 °C and 0.5 atm pressure has a total translational kinetic energy of about 375.5 J.

By adding the two types of kinetic energy, it is possible to calculate the object's total kinetic energy. Remember that the product of the object's mass and the square of its linear velocity (around its centre of mass) and dividing the result by two gives the object's translational kinetic energy.

KE = (3/2) * nRT

PV = nRT

where P is the pressure, V is the volume, and the other variables are the same as in the kinetic energy formula.

n = PV / RT

Substituting the given values, we get:

n = (0.5 atm) * (3.5 L) / [(0.08206 L·atm/mol·K) * (6 + 273.15 K)]

n ≈ 0.0671 mol

KE = (3/2) * nRT

Substituting the given values and the number of moles we just calculated, we get:

KE = (3/2) * (0.0671 mol) * (0.08206 L·atm/mol·K) * (6 + 273.15 K)

KE ≈ 375.5 J

To know more about kinetic energy visit:-

https://brainly.com/question/26472013

#SPJ1

A plastic pipe 9 cm long has an outside radius of 3 cm and an inside radius of 2cm. if the density of the plastic is 0.82 g/cm,  the mass of the pipe  is 115.84 g.

To calculate the mass of the pipe, we need to find its volume and then multiply it by the density of the plastic. The volume of the pipe can be calculated as the  difference  between the volume of the outer cylinder and the inner cylinder:

volume of the pipe= volume of the outer cylinder- volume of the inner cylinder.Now the formula for the volume of a cylinder is:

Volume = π × r^2 × h, where r is the radius and h is the height of the cylinder.so  volume of the outer cyliner is = π × (3)^2 × 9 = 254.47 cm^3, volume of the inner cylinder= π × 2^2 × 9 = 113.10 cm^3, volume of the pipe =254.47 cm^3 - 113.1 = 141.37 cm^3.

Now we calculate the mass of the pipe by multiplying its volume by the density of the plastic:

Mass = Volume × Density = 141.37 cm^3 × 0.82 g/cm^3 = 115.84 g

To know more about mass refer to the link   brainly.com/question/19694949

#SPJ4

The transducer's ringing frequency is 1.731 kHz.
In a step test of a transducer, a signal has a damped oscillation that decays to a steady value. The period of oscillation is 0.577 ms.

The formula for the time period of oscillation is given by:T = (2π / ω)0.5,where T = time period and ω = angular frequency. From the above equation, the angular frequency is given as:ω = (2π / T)^2. The frequency of oscillation is given as:f = 1 / T. The formula for the damping ratio is given as:ζ = ln(A1/A2)/Tn, where A1 = amplitude of the first peak, A2 = amplitude of the second peak and Tn = time between peaks.

Substituting the values, we get:ζ = ln(0.707/0.707)/0.577ζ = 0. We know that the ringing frequency is given by:fr = f (1 - 2ζ^2)^0.5. Substituting the values, we get:fr = 1 / 0.577 x (1 - 2 x 0^2)^0.5fr = 1.731 kHz.

Learn more about period of oscillation:

https://brainly.com/question/22499336

#SPJ11

The magnetic force exerted on a 2.35m length of wire carrying a current of 0.819A perpendicular to the magnetic field of 0.920 T is 1.807 N.

The magnetic force is the force that acts between two magnets or between a magnet and a magnetic material. When a moving charge is exposed to a magnetic field, it experiences a magnetic force. The direction of the magnetic force is perpendicular to both the magnetic field and the direction of the motion of the charged particle.

The magnetic force is given by:

F = BILsin(θ)

where,

F is the magnetic force

B is the magnetic field

I is the current

L is the length of the wire

θ is the angle between the current and the magnetic field.

The length of the wire (L) is 2.35 m

The current (I) is 0.819 A

The magnetic field (B) is 0.920 T

As the wire is carrying the current perpendicular to the magnetic field, the angle between the current and the magnetic field is 90°.

Hence, the magnetic force (F) is given by:

F = BILsin(θ)

F = 0.920 T × 2.35 m × 0.819 A × sin 90°F = 1.807 N

Therefore, the magnetic force exerted on a 2.35 m length of wire carrying a current of 0.819 A perpendicular to the magnetic field of 0.920 T is 1.807 N.

To know more about magnetic force  refer here:

https://brainly.com/question/3160109#

#SPJ11

Different colors have different indices of refraction. This is known as dispersion, which is the separation of white light into its constituent colors as it passes through a prism. The prism does not contain narrow, equally spaced slits; instead, it is curved in order to separate light into its constituent colors.

The dispersion of light when it passes through a prism shows that different colors have different indices of refraction.The process in which white light separates into its constituent colors is known as dispersion. It is caused by the fact that different colors of light travel at different speeds in a material. Because the speed of light is lower in materials than it is in a vacuum, the amount by which the light is refracted (i.e., bent) is determined by the material's refractive index, which is a measure of the material's ability to refract light.

Dispersion can be illustrated by a prism. When white light passes through a prism, it is dispersed into its component colors, forming a spectrum. Red, orange, yellow, green, blue, indigo, and violet are the seven colors in this spectrum.A material's index of refraction is defined as the ratio of the speed of light in a vacuum to the speed of light in that material.

The higher the refractive index of a material, the slower light travels through it. Different colors of light are refracted (bent) to different degrees by a material due to this difference in speed, resulting in the dispersion of light. As a result, when white light is passed through a prism, it produces a spectrum of colors. Therefore, option (C) different colors have different indices of refraction

For more such questions on refraction

https://brainly.com/question/26655381

#SPJ11

The velocity of the boat immediately after the child throws the package, assuming it was initially at rest, is 0.31 m/s.

The direction of motion of the package is positive, so we can take its velocity as positive.

m = 2.20 kg (mass of the package)v = 2.50 m/s (velocity of the package)

Final momentum of the system = mv

Final momentum of the system = 2.20 kg × 2.50 m/s

Final momentum of the system = 5.5 kgm/s

The mass of the child is 21.0 kg, and that of the boat is 45.0 kg.

Let the velocity of the boat immediately after the child throws the package be[tex]v_2[/tex].

[tex]m_1v_1 + m_2v_2 = mv[/tex]

where [tex]m_1[/tex] , [tex]v_1[/tex] and[tex]m_2[/tex] , [tex]v_2[/tex]  are the masses and velocities of the boat and child respectively, and m and v are the masses and velocities of the system after the event.

[tex]m_1[/tex] = 45.0 kg (mass of the boat)

[tex]m_2[/tex] = 21.0 kg (mass of the child)v1 = 0 (initial velocity of the boat)

[tex]v_2[/tex] = velocity of the boat after the child throws the package.

[tex]m = m_1 + m_2 = 45.0 kg + 21.0 kg = 66.0 kg

v_1 + v_2 = mv_2 = v − v_1v_2 = mv - v_1v_2 = (m_1v_1 + m_2v_2 - m_1v_1) / m[/tex]

Substituting the values we get:

[tex]v_2[/tex]= (45.0 kg × 0 + 21.0 kg × 5.5 kgm/s - 45.0 kg × 0) / 66.0 kg

[tex]v_2[/tex] = 0.31 m/s

Therefore, the velocity of the boat immediately after the child throws the package, assuming it was initially at rest, is 0.31 m/s.

To know more about Velocity refer here :

https://brainly.com/question/80295

#SPJ11

The surface area of the triangular prism as shown in the diagram is 660 cm².

To calculate the area of a triangular prism, we multiply the perimeter of the base to the length of the prism and add it to two times the area of the base.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the surface area of the triangular prism is 660 cm².

Learn more about surface area of a triangular prism here: https://brainly.com/question/30227989

#SPJ1

Therefore, we can describe the direction as "away from you, to the right, and up." option c is correct.

For such more question on magnitude

https://brainly.com/question/24468862

#SPJ11

To calculate the smallest value of v sufficient for a pendulum (with embedded mass m) to swing clear over the top of its arc, we need to first understand the equation of motion for the pendulum.

The equation of motion is given by:
v2 = g(L-x)sin θ
Where g is the acceleration due to gravity, L is the length of the pendulum, x is the amplitude, and θ is the angle of the pendulum.

To calculate the smallest value of v sufficient for the pendulum to swing clear over the top of its arc, we need to set θ equal to 90° and solve for v. This gives us:
v2 = g(L-x)sin 90°
v2 = g(L-x)
v = √(g(L-x))

Therefore, the smallest value of v necessary for the pendulum to swing clear over the top of its arc is equal to √(g(L-x)).

#SPJ11

to learn more about pendulum : https://brainly.com/question/15543716

The frequency of your friend's trombone musical instrument is 353.3 Hz.

When two musical instruments are being played together as a duet or ensemble, it is critical that they be in tune. One instrument is used as a reference for the other, and any necessary adjustments are made based on the reference instrument's pitch. In this case, the reference instrument is the student's trombone, which produces a tone at 350 Hz. The friend's trombone is not perfectly in tune with the reference instrument, which causes a beat frequency to be heard.

To determine the frequency of the friend's trombone, we can use the formula:f1 - f2 = n * B, where f1 and f2 are the frequencies of the two instruments, n is the number of beats per second, and B is the beat frequency. In this case, n = 3 beats per 3 seconds, which is equivalent to 1 beat per second, or 1 Hz. The beat frequency B is therefore 1 Hz. We can rearrange the formula to solve for f2:f2 = f1 - n * B

Substituting the known values, we get:f2 = 350 Hz - 1 Hz = 349 Hz. However, we are told that the student's ear is good enough to detect that the friend's trombone is at a higher frequency. This means that the friend's trombone is actually slightly sharper than the reference instrument. To find the exact frequency, we can use the fact that the beat frequency is caused by the difference in frequency between the two instruments.

Since we are hearing 3 beats per 3 seconds, the difference in frequency must be 3 Hz. Therefore, the frequency of the friend's trombone is:f2 = f1 + B = 350 Hz + 3 Hz = 353 Hz. To round to at least 1 decimal place, we can write:f2 = 353.3 Hz

To know more about musical instrument, refer here:

https://brainly.com/question/16191430#

#SPJ11

1006.7 Newtons force must be applied by the chain passing over the sprocket in order to give the wheel an acceleration of 4.53 rad/[tex]s^2[/tex].

To calculate the force required, we need to use the formula:

F = ma

where F is the force, m is the mass of the wheel, and a is the acceleration of the wheel.

First, we need to calculate the radius of the sprocket:

r = d/2 = 8.99 cm/2 = 4.495 cm

The tangential acceleration of the wheel can be calculated using the formula:

a = r x α

where α is the angular acceleration of the wheel.

We can rearrange this formula to solve for α:

α = a / r = 4.53 / 4.495 = 1006.7 rad/s^2

Now, we need to assume a mass for the wheel.

Let's say the wheel has a mass of 1 kg.

Using the formula F = ma

we can calculate the force required:

F = m x a = 1 kg x 1006.7 rad/[tex]s^2[/tex] = 1006.7 N

For similar question on force

https://brainly.com/question/12785175

#SPJ11

a) Energy of a photon (in eV) ≈ 5.06 × 10³ eV

b) 0 Total energy delivered = 4.25 HJ = 4.25 × 10⁹ J

c) Photons absorbed during the dental X-ray is approximately 5.25 × 10²⁴ photons.

Let's discuss it further below.

To determine the energy of a single photon of the X-rays in electron volts, we can use the following formula:

Energy of a photon (in eV) = (hc) / (λ * e)

where h is Planck's constant (6.63 × 10⁻³⁴ Js), c is the speed of light (3 × 10⁸ m/s), λ is the wavelength (0.0245 nm = 2.45 × 10⁻¹¹ m), and e is the elementary charge (1.6 × 10⁻¹⁹ C).

Step 1: Calculate the energy of a photon in Joules:
Energy of a photon (in J) = (6.63 × 10⁻³⁴ Js) × (3 × 10⁸ m/s) / (2.45 × 10⁻¹¹ m)
Energy of a photon (in J) ≈ 8.1 × 10⁻¹⁶ J

Step 2: Convert the energy from Joules to electron volts:
Energy of a photon (in eV) = (8.1 × 10⁻¹⁶ J) / (1.6 × 10⁻¹⁹ C)
Energy of a photon (in eV) ≈ 5.06 × 10³ eV

To find the number of photons absorbed during the dental X-ray, we can use the following formula:

Number of photons absorbed = Total energy delivered / Energy of a single photon

Step 3: Convert the energy delivered to Joules:
Total energy delivered = 4.25 HJ = 4.25 × 10⁹ J

Step 4: Calculate the number of photons absorbed:
Number of photons absorbed = (4.25 × 10⁹ J) / (8.1 × 10⁻¹⁶ J/photon)
Number of photons absorbed ≈ 5.25 × 10²⁴ photons

In summary, the energy of a single photon of these X-rays is approximately 5.06 × 10³ eV, and the number of photons absorbed during the dental X-ray is approximately 5.25 × 10²⁴ photons.

Learn more about electron volts.

brainly.com/question/29650228

#SPJ11

You threw a bowling ball with 453 n of force, the ball moves 23,654 mm before coming to a stop. The work did by you on the ball is: 10,731.962 n•m.

You did work on the ball when you threw it with 453 n of force. Work is calculated by multiplying the amount of force (in newtons) by the distance the object travels (in meters).

To solve for the work done, we must first convert the distance from mm to m: 23,654 mm = 23.654 m. Then, we can calculate the work done using the equation Work = Force x Distance, which gives us:

Work = 453 n x 23.654 m = 10,731.962 n•m.

The unit of measurement for work is the Newton meter (n•m). This means that when you threw the bowling ball with 453 n of force, you did 10,731.962 n•m of work on it.

To know more about force refer here:

https://brainly.com/question/26115859#

#SPJ11

You threw a bowling ball with 453 n of force, the ball moves 23,654 mm before coming to a stop. The work did by you on the ball is: 10,731.962 n•m.

The work done on the ball can be calculated using the formula:

Work = Force x Distance

where Force is the applied force on the ball and Distance is the distance over which the force is applied.

In this case, the force is 453 N and the distance is 23,654 mm. However, it is important to convert the distance from millimeters to meters, since the unit of force is in Newtons and the unit of distance should be in meters to maintain consistency in units.

Converting the distance from millimeters to meters:

23,654 mm = 23,654/1000 m = 23.654 m

Therefore, the work done on the ball is:

Work = Force x Distance

Work = 453 N x 23.654 m

Work = 10,742.962 J

Therefore, you did approximately 10,742.962 Joules of work on the ball.

For more details about work click here:

https://brainly.com/question/18094932#

#SPJ11

By following these steps, you will find the hydrostatic force acting against the horizontal square at the bottom of the 3ft pool with the given liquid density.

To calculate the hydrostatic force against a horizontal square (2ft x 2ft) at the bottom of a 3ft pool, you can follow these steps:
Step 1: Find the pressure at the bottom of the pool.
Hydrostatic pressure (P) can be calculated using the formula:
P = ρgh
where ρ (rho) is the liquid density, g is the acceleration due to gravity (32.2 ft/s²), and h is the depth of the pool (3ft).
Step 2: Calculate the hydrostatic pressure.
Use the given liquid density (ρ) and plug in the values into the formula:
P = ρ * 32.2 * 3
Step 3: Find the area of the horizontal square.
Area (A) = length × width = 2ft × 2ft = 4ft²
Step 4: Calculate the hydrostatic force.
Hydrostatic force (F) can be calculated using the formula:
F = PA
Substitute the calculated pressure (P) and area (A) into the formula:
F = P * 4
By following these steps, you will find the hydrostatic force acting against the horizontal square at the bottom of the 3ft pool with the given liquid density.

For similar question on hydrostatic.

https://brainly.com/question/124508\

#SPJ11

3). The wavelength of the laser light used is approximately 0.0000663 mm.

To determine the wavelength of the laser light, we can use the formula for the spacing between diffraction maxima from a diffraction grating:

dsinθ = mλ

where d is the spacing between the grating lines (in this case, 1/300 mm), θ is the angle between the incident beam and the diffracted beam (which can be calculated from the positions of the maxima and the distance from the grating to the screen), m is the order of the maximum, and λ is the wavelength of the light.

Since the problem mentions a first order maximum, we can use m = 1.

Therefore, the correct calculation to determine the wavelength of the laser light is:

λ = d*sinθ/m = (1/300 mm)*sin(θ)/1

We can use the diagram to measure the distance between the first order maximum and the central maximum, and the distance between the grating and the screen, in order to calculate sinθ:

sinθ = (distance between maxima)/(distance to screen)

sinθ = (0.40 m)/(2.00 m)

sinθ = 0.2

Substituting this value into the equation, we get:

λ = (1/300 mm)*sin(0.2) = 0.0000663 mm

Therefore, the wavelength of the laser light used is approximately 0.0000663 mm.

4). D. "Only transverse waves can be polarised" statement is correct about the waves.

Polarisation refers to the alignment of the oscillations of a wave in a particular direction. Transverse waves have oscillations that are perpendicular to the direction of wave propagation, and therefore they can be polarised by filtering out all but one orientation of oscillation. Longitudinal waves, on the other hand, have oscillations that are parallel to the direction of wave propagation, and therefore they cannot be polarised in the same way.

To know more about wavelength, visit:

https://brainly.com/question/13533093

#SPJ1

In the actual case where there is water inside the eye, the lens needs to be stronger than if there were only air in our eyes.

This is because the refractive index of water is higher than that of air, meaning that light will bend more when it passes through water than when it passes through air. This makes it harder for the eye to focus light onto the retina, and so a stronger lens is needed to compensate for this increased bending.

If there is also water outside the eye, such as when we are underwater, we need to wear goggles to provide a layer of air in front of our eyes, which allows light to be refracted less and therefore makes it easier to see clearly.

To know more about lens, here

brainly.com/question/31190743

#SPJ4

Currently, wind power generates a greater overall share of electricity than solar does. Solar energy is a far more practical choice for households.

To know more about electricity

https://brainly.com/question/27960851

#SPJ4

The initial impulse of the baseball was 7.37 N-s when thrown at 62.5 mph. After the batter improved his follow-through, the impulse increased by 13.0%, resulting in a new speed of the ball leaving the bat of approximately 39.1 m/s.

The impulse of an object is equal to the force applied to it multiplied by the time for which the force acts. In the case of a baseball being hit by a bat, the impulse is what causes the ball to accelerate and leave the bat. The initial impulse of the baseball was 7.37 N-s when thrown at 62.5 mph. However, the batter improved his follow-through, resulting in a 13.0% increase in the impulse applied to the ball. This increase in impulse caused the ball to leave the bat with a higher velocity, which can be calculated using the formula for impulse and the mass of the baseball. The new speed of the ball leaving the bat is approximately 39.1 m/s, which is a significant improvement from the initial speed.

learn more about impulse here:

https://brainly.com/question/2193212

#SPJ4

The angular width of the central peak when monochromatic light of wavelength 600 nm is incident on a slit with a width of 6 micrometers is 0.1 radian.

The angular width is the angle between the two points at which the intensity of the light has dropped to 1/2 the maximum value. This angle is known as the full width at half maximum (FWHM).

The angular width of the central peak for a monochromatic light of wavelength 600 nm incident on a slit with a width of 6 micrometers can be calculated using the equation:

θ = (λ/a)

where λ is the wavelength of the incident monochromatic light and a is the width of the slit.

Therefore, the angular width of the central peak of a diffraction grating with monochromatic light of wavelength 600 nm and a slit width of 6 micrometers can be calculated as follows:

θ = λ/a

θ = 600 x 10⁻⁹ / 6 x 10⁻⁶

θ = 100 x 10⁻³ radians

θ = 0.1 radian

Therefore, the angular width of the central peak is 0.1 radian.

To know more about angular width, refer here:

https://brainly.com/question/28202134#

#SPJ11

The thickness of lead required to block a 20MeV electron beam to only 5% transmission is approximately 1.4mm.

An electron beam is a stream of electrons that can be directed and manipulated using magnetic and electric fields. An electron beam can be used to make the beams of charged particles, synchrotron light, or X-rays, which are widely used in research, medicine, and engineering.

The penetration of electrons through a substance is determined by the speed of the electrons, the density and composition of the substance, and the thickness of the substance.To calculate the thickness of the lead needed to block a 20MeV electron beam to only 5% transmission, we will use the exponential attenuation equation given below:

I = I₀e⁻μx

Where:

I₀ = initial intensity of electron beam

I = intensity of electron beam after passing through x thickness of lead

μ = mass attenuation coefficient of lead at 20Me

Vx = thickness of lead required to reduce the electron beam to 5% of its original intensity (95% absorption)

To calculate x, we can use the equation:

I/I₀ = 0.05 = e^(-μx)

Taking the natural logarithm of both sides of the equation gives:

-ln(0.05) = μx

Thus:

x = (-ln(0.05))/μ

The mass attenuation coefficient of lead at 20MeV is 0.206 cm²/g. We can convert this to m²/kg by dividing by the density of lead, which is 11.34 g/cm³. Therefore,

μ = 0.206/11.34 = 0.01816 m²/kg

Substituting this value for μ gives:

x = (-ln(0.05))/0.01816= 1.4 mm

Therefore, the thickness of lead needed to block a 20MeV electron beam to only 5% transmission is approximately 1.4mm.

Learn more about electron beam: https://brainly.com/question/15058767

#SPJ11

Conduction involves the transfer of heat through direct contact,
while radiation involves the transfer of heat through electromagnetic waves.

Conduction and radiation are two different mechanisms by which heat is transferred from one object to another.

Conduction is the transfer of heat through direct contact between two objects that are at different temperatures. When two objects are in contact, the hotter object transfers some of its heat energy to the cooler object until they reach thermal equilibrium. For example, when you touch a hot stove, heat is transferred from the stove to your hand through conduction.

Radiation is the transfer of heat through electromagnetic waves. Unlike conduction, radiation does not require direct contact between two objects. Instead, heat energy is transferred through the air or space between the two objects. For example, the sun warms the earth through radiation. Heat energy is transferred from the sun to the earth through electromagnetic waves, even though there is no physical contact between them.

When a person moves away from a stationary sound source, the phrase that describes: the sound perceived by the person is the pitch of the sound that will decrease.

A person moves away from a stationary sound source; the pitch of the sound perceived by the person will decrease. This happens because the pitch is the frequency of the sound. The pitch of the sound produced by a source of sound is the number of sound waves produced per second.

The number of sound waves arriving per second at a person's ear when he moves away from the sound source is reduced, resulting in a decrease in pitch, and a change in frequency of the sound.

To know more about "Stationary sound" refer here:

https://brainly.com/question/9753152#

#SPJ11

The force is removed after the box travels a certain distance until it comes to a stop. The distance the box travels before coming to a stop is known as the stopping distance. What is the mass, speed, and coefficient of kinetic friction between the box and the surface?

Mass = 11.6 kg Speed = 3.00 m/s Coefficient of kinetic friction = 0.22Force is required to maintain a constant speed, and the force is equal to the force of friction. So, F = frictional force Frictional force = F = μkNWhere,μk is the coefficient of kinetic friction N is the normal force. The normal force, N = m g where, m is the mass of the box g is the acceleration due to gravity g = 9.81 m/s²So, the frictional force F is given by; F = μkN = μk × m × g Now, F = 0.22 × 11.6 × 9.81 = 25.578 N The force required to move the box is 25.578 N.

The force is removed after the box travels a certain distance until it comes to a stop. The distance the box travels before coming to a stop is known as the stopping distance. The stopping distance can be calculated using the formula; d = (v²/2μk g)where, v is the speed of the object before it comes to a stopμk is the coefficient of kinetic friction g is the acceleration due to gravity g = 9.81 m/s²The stopping distance is, d = (v²/2μk g) Substituting the given values in the above equation, we get; d = [(3.00 m/s)² / (2 × 0.22 × 9.81 m/s²)] = 2.38 m

Therefore, the box slides for 2.38 m before coming to rest.

Learn more about how far does the box at: brainly.com/question/14704175

#SPJ11

Answer:

The  frictional force "opposes" the motion.

Thus the frictional force is to the left.

The tension that a rope must withstand if it is used to accelerate a 1810-kg car horizontally along a frictionless surface at 1.20 m/s² is 21900 N.

The question is asking for the amount of tension that the rope should have to accelerate a 1810-kg car horizontally along a frictionless surface at a speed of 1.20 m/s².

Tension (T) = mass (m) x acceleration (a)

Using the given values:

T = (1810 kg) x (1.20 m/s²)T = 21900 N

Therefore, the tension that a rope must withstand if it is used to accelerate a 1810-kg car horizontally along a frictionless surface at 1.20 m/s² is 21900 N.

Here you can learn more about The tension

https://brainly.com/question/30620986#

#SPJ11  

According to the text, jupiter has a central pressure of 100 million bars, while earth has a central pressure of 4 million bars. Therefore, the pressure at the center of Jupiter is 25 times greater than that of the Earth.

Below are detailed explanations on Jupiter's pressure, Earth's pressure and how many times more pressure exists in the center of Jupiter compared to that of Earth.

Pressure of Jupiter: Jupiter is known for having the largest and strongest magnetic field among all the planets in the solar system. According to research, Jupiter’s central pressure can go up to 100 million bars. The pressure at Jupiter's core is around 4,000,000 atmospheres. This central pressure is what sustains the fusion process.

Pressure of Earth: Earth is composed of several layers, with the innermost layer being the core. The pressure at the center of the Earth is around 4 million bars. This is because the Earth is much smaller than Jupiter and has much less mass. This pressure is still much greater than the pressure that we experience at the surface.

How many times more pressure exists in the center of Jupiter compared to that of Earth?The pressure at the center of Jupiter is 25 times greater than that of the Earth.

We can calculate this as follows: Pressure in Jupiter's center = 100 million bars

Pressure in Earth's center = 4 million bars

Therefore, Pressure in Jupiter's center ÷ Pressure in Earth's center = 100 million bars ÷ 4 million bars = 25 times greater pressure exists in the center of Jupiter compared to that of Earth.

To learn more about pressure refer to: brainly.com/question/28012687

#SPJ11

The painter will be able to catch the can if it falls off a ledge and passes in front of him, given that he has lightning-fast reflexes.

What we know: The distance between the can and the ground is 2.25 m.
The distance between the painter’s hands and the can is 4.45 m.
To solve this problem, we need to use the following equation: s = ut + 1/2 at²
Where:s is the distance traveled by the can is the initial velocity (0)m/sa is the acceleration due to gravity (-9.81)m/st is the time taken for the can to fall

Let’s start by calculating the time taken for the can to fall: s = ut + 1/2 at²2.25 = 0t + 1/2(-9.81)t²4.905t² = 2.25t = sqrt(2.25/4.905) = 0.67 seconds
Now, we can calculate the distance traveled by the can horizontally in 0.67 seconds:
distance = speed × time
The speed of the can is the same as the speed of the painter's hands, so let's call it v:distance = v × 0.67
We don't know what v is yet, but we can find it using the fact that the painter's hands are 4.45 m above the can when it falls:v = sqrt(2gh)
where g is the acceleration due to gravity (9.81 m/s²) and h is the distance between the painter’s hands and the can (4.45 m):v = sqrt(2 × 9.81 × 4.45) = 9.90 m/s

Finally, we can calculate the distance the can travels horizontally: d = v × t = 9.90 × 0.67 = 6.63 m
The horizontal distance the can travels is 6.63 m, which is greater than the distance between the painter and the wall.

Therefore, if the can falls off the ledge and passes in front of him, the painter will be able to catch it if he has lightning-fast reflexes.

To know more about "Acceleration due to gravity" refer here:

https://brainly.com/question/11873969#

#SPJ11

Answer:

Slight bending of light as it passes around the edge

of an object.

The wire is insulated with a layer of plastic or paint around the outside when wound into a coil to form an electromagnet to prevent the wire from shorting out against itself or other conductive materials.

When an electric current flows through a wire, it generates a magnetic field around the wire. By coiling the wire, the magnetic field is strengthened, creating a more powerful electromagnet.

However, if the wire is not insulated, the coils can touch each other, creating a short circuit that can damage the wire or the power source. Insulating the wire with a layer of plastic or paint prevents this from happening by creating a barrier between the wire and other conductive materials.

This allows the electric current to flow through the wire and generate the magnetic field, while also protecting the wire and ensuring that the electromagnet works properly.

​

Read more about electromagnet

brainly.com/question/12555869

#SPJ1