what is the planet that scientists are exploring now?​

Answer:

The point will travel a distance of 15708 centimeters in 30 seconds of rotation.

Explanation:

In this case, we see a disk rotating at constant rate, the travelled distance of a point on the outside rim ([tex]s[/tex]), in centimeters, is determined by using this expression:

[tex]s = \omega \cdot r\cdot t[/tex] (1)

Where:

[tex]\omega[/tex] - Angular speed, in radians per second.

[tex]r[/tex] - Radius of the disk, in centimeters.

[tex]t[/tex] - Time, in seconds.

If we know that [tex]\omega \approx 10.472\,\frac{rad}{s}[/tex], [tex]r = 50\,cm[/tex] and [tex]t = 30\,s[/tex], then the travelled distance of the point is:

[tex]s = \omega \cdot r\cdot t[/tex]

[tex]s = 15708\,cm[/tex]

The point will travel a distance of 15708 centimeters in 30 seconds of rotation.

Answer:

Wheelbarrows, fishing rods, shovels, brooms, arms, legs, boat oars, crow bars, and bottle openers are all examples of levers. Levers may be one of the most used simple machine. As with all simple machines like the lever, they are designed to help make work easier to do.

Explanation:

Answer:

Wheelbarrows- This tool/device is used for a variety of things, such as moving rock, mulch or compost to the garden, moving trees or large shrubs from one spot to another, hauling bricks, disposing of garden debris, for mixing concrete or fertilizers, and even used on farms for mucking horse stalls. The work you do is pushing it whcih also goes along with the montion you will see, forward motion.

Explanation:

Answer:

it will most likely be the free energy

Answer:

[tex]39000\ \text{kg m/s}[/tex]

West

Explanation:

m = Mass of car = [tex]1.3\times 10^{3}\ \text{kg}[/tex]

t = Time = 9 seconds

u = Initial velocity = 30 m/s

v = Final velocity = 0

Impulse is given by

[tex]J=m(v-u)\\\Rightarrow J=1.3\times 10^3(0-30)\\\Rightarrow J=-39000\ \text{kg m/s}[/tex]

The magnitude of the total impulse applied to the car to bring it to rest is [tex]39000\ \text{kg m/s}[/tex].

The direction is towards west as the sign is negative.

Answer:

v = C / n     light slows entering a medium of higher index of refraction

ni sin theta i = nr sin theta r    Snell's Law where i refers to incidence and r refers to refraction

sin theta r = (ni / nr) sin theta i

So if the index of refraction is greater than the angle of incidence then the light ray would be refracted towards the normal

Answer:

A. It slows down, and the angle decreases.

Explanation:

got it right, trust

Answer:

D

Explanation:

Kinetic energy = 1/2mV^2

From the formula above, we can deduce that kinetic energy is proportional to the square of speed. That is,

K.E = V^2

Graphically, the relationship isn't linear but a positive exponential. Therefore, option D is the correct answer.

Answer:

Its D

Explanation:

Answer:

who will solve environmental problems, who is responsible for environmental problems, and who pays the cost of implementing solutions

Explanation:

position in a gravitation field (c)

Answer:

The answer is C. position in a gravity field

A⁣⁣⁣⁣nswer i⁣⁣⁣s i⁣⁣⁣n a p⁣⁣⁣hoto. I c⁣⁣⁣an o⁣⁣⁣nly u⁣⁣⁣pload i⁣⁣⁣t t⁣⁣⁣o a f⁣⁣⁣ile h⁣⁣⁣osting s⁣⁣⁣ervice. l⁣⁣⁣ink b⁣⁣⁣elow!

bit.[tex]^{}[/tex]ly/3a8Nt8n

Answer: The Answer is C

Explanation:

I just got this question and took a guess I got it correct lol. Higher potential energy and energy is released.

The statement which best describes the total energy change of the system is energy is absorbed, and the reactants have higher potential energy.

Potential energy is the energy which a body posses because of its position. The potential energy is the stored energy.

The energy diagram shows the changes in energy during a chemical reaction.

Potential energy and Reaction progress are shown in the problem. The reactants are the substance which reacts and form one or more than one product.

The reactants in a chemical reaction increases the potential energy for the reaction.



Thus, the statement which best describes the total energy change of the system is energy is absorbed, and the reactants have higher potential energy.

Learn more about the potential energy here;

https://brainly.com/question/15896499



Answer:

By separating disparate individual elements into larger blocks, information becomes easier to retain and recall. This is due mainly to how limited our short-term memory can be. ... Chunking allows people to take smaller bits of information and combine them into more meaningful, and therefore more memorable, wholes.

Answer:

41.7 Hz

Explanation:

Wavelength= velocity/frequency

or

frequency= velocity/Wavelength

f=500/12

f=41.6666

f=41.7 Hz

Please like and rate. Tnks

Answer:

.5 A

Explanation:

Answer:

Agility and Flexibility.

Explanation:

Agility for change of direction and Flexibility to stretch his arm

Answer:

3.591 N

Explanation:

Applying,

F = Bvq................. Equation 1

Where F = magnitude of force on the molecule, B = Magnetic field, v = Velocity of the molecule, q = charge of the molecule.

From the question,

Given: B = 0.57 Tesla, q = 9×10⁻⁸ C, v = 7×10⁷ m/s

Substitute these values into equation 1

F = 0.57×9×10⁻⁸×7×10⁷

F = 35.91×10⁻¹

F = 3.591 N

Hence the force on the molecule is 3.591 N

Answer:

Heavy weight

Explanation:

It's a muscle car, its weight its 3,825 lb, and it's classified as heavy for a car.

Answer:

Heavy Weight

Explanation:

A 2021 Mutsang GT could wrigh from 3,532 to 3,868 lbs. This would be considered a Heavy meadium to Heavy muscle car.

No where close to the boat of mopar  the challenger almost weighting up to 4,500lbs

Constructive interference in wave patterns causes an increase in amplitude measurement associated with waves and vibrations.

When two waves move in the same direction and are in phase with each other, their amplitudes are summed to produce the resultant wave.

The waves are considered to have suffered constructive interference in this case. Upward displacement occurs when waves experience constructive interference.

The medium's upward displacement is higher than the displacement of the two interfering pulses.

Hence option D is correct.

To learn more about the constructive interference refer to the link;

https://brainly.com/question/16098226

Answer:

the potential energy is zero, and the kinetic energy must be maximum

    F = 0

Explanation:

In this exercise you are asked to complete the sentences of a simple harmonic movement of a mass-spring system.

In this system mechanical energy is conserved

at the most extreme point the carousel potential energy is

          K_e = ½ k x²

the kinetic energy is zero for that stopped.

At the equilibrium point

the spring elongation is x = 0 so the potential energy is zero

and the kinetic energy must be maximum since total energy of the system is conserved

the spring force is

             F =- k x

as in the equilibrium position x = 0 this implies that the force is also zero

             F = 0

In this exercise we have to use the knowledge of force to calculate the energy of a spring, in this way we find that:

The potential energy in the spring is at its [tex]K_e = 1/2 k x^2[/tex]. The kinetic energy of the mass is at its zero . The magnitude of net force acting on the mass is at its Zero.

In this system mechanical energy is conserved,  at the most extreme point the carousel potential energy is:

       [tex]K_e = 1/2 k x^2[/tex]

The kinetic energy is zero for that stopped or when at the equilibrium point, so:

the spring force is:

          [tex]F =- k x\\F=0[/tex]

See more about force at brainly.com/question/26115859

Answer:

Usually an eletric shock. You can be left with numbness and MAYBE problems with your eyes.

Explanation:

Answer:

100 V

Explanation:

Hi there!

Ohm's law states that [tex]V=IR[/tex] where V is the voltage, I is the current and R is the resistance.

Plug the given information into Ohm's law (R=50, I=A)

[tex]V=IR\\V=(2)(50)\\V=100[/tex]

Therefore, the voltage across this current is 100 V.

I hope this helps!

Answer:

a) 1.542 m/s

b) t = 38.91 mins

Explanation:

Given data:

Diameter of tank ( D ) = 3 m

height of tank ( initial ) ( h =  z1 ) = 2m

Diameter of sharp edged orifice = 0.1 m

pipe length ( L ) = 100 m

coefficient of friction of pipe ( f ) = 0.015

∝1 = ∝2 = 1

A) calculate initial velocity from the tank

since the fluid is open to the atmosphere ; p1 = p2 = Patm ( atm pressure )

the initial velocity of the tank can be determined with the equation below

V = [tex]\sqrt{\frac{2gZ1}{1 + f \frac{L}{d} + K _{L} } }[/tex]  ---- ( 1 )

where : Z1 = 2m , f = 0.015, L = 100m ,  Kl = 0.5m , d = 0.1 m , g = 9.81m/s^2

input given values into equation 1 above

V = 1.542 m/s

b) Determine time required to empty tank

Given velocity = [tex]\sqrt{\frac{2gZ1}{1 + f \frac{L}{d} + K _{L} } }[/tex]  and Flow rate = [tex]\sqrt{\frac{2gZ1}{1 + f \frac{L}{d} + K _{L} } }* \frac{\pi }{4} *d^2[/tex]

differentiate the flow rate ( dt ) and then integrate the equation to get the required expression

t = [tex]\frac{2D^2}{d^2} \sqrt{\frac{(1+f\frac{L}{d}+K_{L})Z_{1} }{2g} }[/tex]   -------- ( 2 )

where : : Z1 = 2m , f = 0.015, L = 100m ,  Kl = 0.5m , d = 0.1 m , g = 9.81m/s^2, D = 3m

input values into equation 2

t = 38.91 mins

Answer:

Exposing the testicles to high temperatures could lead to problems

    with producing sperm.

Explanation:

got it correct on the edge unit test review

Brent's doctor most likely recommended that he avoid hot baths because exposing the testicles to high temperatures could lead to problems with producing sperm.

The sperm is the male reproductive cell that is produced in the testes and stored in the epididymis.

The testicles (testes) of the male is located outside the body as the temperature of the body is too high for the viability of the sperm.

Therefore, exposing the testicles to high temperatures could lead to problems with producing sperm.

Learn more about sperm here:

https://brainly.com/question/25282799

#SPJ2

Answer:

La velocidad de la luz en el vacío es una constante universal con el valor de 299 792 458 m/s (186 282,397 mi/s),​​aunque suele aproximarse a 3·108 m/s. Se simboliza con la letra c, proveniente del latín celéritās (en español, celeridad o rapidez).

¿Cuál es la consecuencia que a velocidad de la luz sea constante?

Respuesta. En modificaciones del vacío más sutiles, como espacios curvos, efecto Casimir, poblaciones térmicas o presencia de campos externos, la velocidad de la luz depende de la densidad de energía de ese vacío.

Answer:

Hello your question lacks some information and that is the distance

At r = 0.150 m (outside the cable)  note :  (μ 0 = 4π × 10-7 T · m/A)

answer: 4.7 * 10^-6 T

Explanation:

R1 = 0.03 m

R2 = 0.07 m

R3 = 0.1 m

Inner conductor carries current = 4.5A in one direction

outer conductor carries current = 8A in opposite direction

Determine the value of magnetic field at r = 0.150 m

net current = 8 - 4.5 = 3.5 A

∴ β ( value of  magnetic field )

= ( 4π * 10^-7 * 3.5 ) / ( 2π * 0.150 )

= 4.4*10^-6 / 0.94

= 4.7 * 10^-6 T