The mass of the tiny bubble of dry air containing 78% N₂ and 22 % O₂ is 28.88 g/mol.
The molecular masses of N₂ and O₂ are 28 g/mol and 32 g/mol respectively.
Tiny bubbles found in dry air is the air inside a solid, liquid or surrounded by a colloid within a fluidic environment.
The approximate molecular mass of dry air is calculated as
= [molecular mass of N₂ × mass percentage of N₂] + [molecular mass of O₂× mass percentage of O₂] / mass percent of N₂ + mass percent of O₂
=[28×78]+[32×22]/78 +22
=28.88 g/mol
To know more about molecular mass here
https://brainly.com/question/30214238
#SPJ4
what total volume of ozone measured at a pressure of 22.0 mmhg and a temperature of 230 k can be destroyed when all of the chlorine from 17.0 g of cf3cl goes through 10 cycles of these reactions?
The total volume of ozone that can be destroyed when all of the chlorine from 17.0 g of CF3Cl goes through 10 cycles of these reactions, measured at a pressure of 22.0 mmHg and a temperature of 230 K, is calculated using the Ideal Gas Law equation (PV=nRT) and stoichiometry.
First, we need to find the moles of CF3Cl and the moles of ozone it can destroy.
Molar mass of CF3Cl = (12.01) + 3(19.00) + 35.45 = 137.46 g/mol
Moles of CF3Cl = 17.0 g / 137.46 g/mol ≈ 0.1236 mol
Since one chlorine atom can destroy one ozone molecule in each cycle, 10 cycles can destroy 10 times the amount:
Moles of ozone destroyed = 0.1236 mol * 10 = 1.236 mol
Now, we can use the Ideal Gas Law equation to find the volume:
V = nRT/P
Where:
V = volume of ozone (in liters)
n = moles of ozone (1.236 mol)
R = ideal gas constant (0.0821 L atm / mol K)
T = temperature (230 K)
P = pressure (converted to atm: 22.0 mmHg * (1 atm / 760 mmHg) ≈ 0.02895 atm)
V = (1.236 mol) * (0.0821 L atm / mol K) * (230 K) / 0.02895 atm ≈ 778.32 L
So, the total volume of ozone that can be destroyed under the given conditions is approximately 778.32 liters.
Know more about ozone
https://brainly.com/question/5019112
#SPJ11
determine the volume, in ml, of 0.100 m naoh(ag) the student should add to 100. ml of 0.100 m hno (aq) to make a buffer solution with a ph of 3.40. justify your answer.
To determine the volume, in ml, of 0.100 M NaOH(aq) the student should add to 100. ml of 0.100 M HNO3(aq) to make a buffer solution with a pH of 3.40, use the following equation:
pH = pKa + log ([base]/[acid])
Where pKa = 3.40 for this solution, [base] = 0.100 M NaOH(aq) and [acid] = 0.100 M HNO3(aq).
Solving for [base], we get:
[base] = [acid]*(10pH - pKa)
Therefore, the volume, in ml, of 0.100 M NaOH(aq) the student should add to 100. ml of 0.100 M HNO3(aq) is:
Volume of NaOH(aq) = 100 ml * (103.40 - 3.40) = 100 ml
Thus, the student should add 100 ml of 0.100 M NaOH(aq) to 100 ml of 0.100 M HNO3(aq) to make a buffer solution with a pH of 3.40.
For similar questions related to volume of solution, refer here:
https://brainly.com/question/14710169#
#SPJ11
nsider the nmr spectrum of a compound with the formula of c 4 h 9 b r . the spectrum used tms as a reference. proton nmr proton nmr spectrum with a doublet at about 1.1 ppm, a 9-part signal centered around 2.25 ppm, and a doublet around 3.4 ppm. an inset shows detail about the peak splitting around 2.25 ppm. what is the structure of the compound?
The structure of the compound is: isopropyl bromide.
Calculation of the hydrogen countHydrogens that aren't at the same chemical environment will be chemically shifted differently.
In addition, the quantity of hydrogens in each group is referred to as integration, and the ratio of integration in each group can aid in determining the number of hydrogens in a given group.
The proton NMR spectrum of a compound with a formula of C4H9Br was studied.
The spectrum made use of TMS as a reference. A doublet at about 1.1 ppm, a 9-part signal centered around 2.25 ppm, and a doublet around 3.4 ppm were observed in the proton NMR. A peak splitting around 2.25 ppm was shown in the inset, which was labeled "detail."
The 9-part signal at around 2.25 ppm could be generated by two different types of hydrogens, namely two methyls and one methylene, which are attached to a carbon bearing the bromine substituent.
The peak splitting, on the other hand, demonstrates that the hydrogens on the carbon adjacent to the carbon that bears the bromine substituent are split into four peaks.
This implies that the carbon next to the bromine substituent is a quaternary carbon and cannot be attached to hydrogens.
Therefore, the only structure that could produce these results is isopropyl bromide.
To know more about "Furosemide" refer here:
https://brainly.com/question/14094914#
#SPJ11
if 50g of solvent dissolve 25g of salt at 50°c, what is the solubility of the salt at this temperature
Answer:
solubility is the amount of a substance that will dissolve in a given amount of another substance. To find the solubility of the salt at 50°C, you need to divide the mass of the salt by the mass of the solvent and multiply by 100 to get the percentage. In this case, the solubility is (25/50) x 100 = 50%. This means that 50 grams of solvent can dissolve 25 grams of salt at 50°C.
both base substitution and frameshift mutations can result in the formation of premature stop codons. true or false
True. Both base substitution and frameshift mutations can result in the formation of premature stop codons, causing premature termination of protein synthesis.
Both base substitution and frameshift mutations can result in the formation of premature stop codons. A base substitution mutation occurs when one base pair is replaced by another. If this substitution results in the formation of a stop codon, it can cause premature termination of protein synthesis. A frameshift mutation occurs when one or more nucleotides are inserted or deleted from the DNA sequence. This can alter the reading frame of the genetic code and result in the formation of a premature stop codon, truncating the protein.
Learn more about nucleotides here: brainly.com/question/967810
#SPJ4
what is the mathematical equation for the electric force between two charges identify each variable
F = k * (q1 + q2) / r² is the formula for the electric force between two charges.
What is each variable's place in the mathematical equation for the electric force between two charges?The resultant force between the two charges is denoted by the letter "F". "r" is the separation between the two charges. You only need to be aware that the "r" stands for "radius of separation" because it is merely a distance.
What are the forces created by electricity between two charges?Unlike charges attract each other whereas like charges repel one another. As a result, a positive charge pulls a negative charge towards it whereas two negative charges repel one another. The line between the two charges is where the attraction or repulsion occurs.
To know more about formula visit:-
https://brainly.com/question/20748250
#SPJ1
solid sodium reacts with liquid water to produce hydrogen gas and aqueous sodium hydroxide(naoh) . write a balanced chemical equation for this reaction.
The balanced chemical equation for the reaction between solid sodium and liquid water is:
2 Na(s) + 2 H₂O(l) → 2 NaOH(aq) + H₂(g)
In this equation, two atoms of sodium (Na) react with two molecules of water (H₂O) to produce two molecules of sodium hydroxide (NaOH) and one molecule of hydrogen gas (H₂).
The reaction is highly exothermic, meaning it releases a significant amount of heat. Sodium is a highly reactive metal and reacts vigorously with water, causing the evolution of hydrogen gas. Sodium hydroxide, also known as caustic soda, is a strong base that can cause severe skin and eye irritation. This reaction is often used in industrial processes for the production of hydrogen gas and sodium hydroxide.
To learn more about sodium hydroxide refer to:
brainly.com/question/24010534
#SPJ4
What, if anything, distinguishes the molecular geometries of AlCl3 and PCl3?
Options:
- PCl3 contains one lone pair on P
- AlCl3 contains one π bond
- one of the two structures has resonance
- AlCl3 and PCl3 have identical molecular geometries
The molecular geometry of PCl3 differs from that of AlCl3 because it has a lone pair on the central atom. The remaining choices are unrelated to the molecular geometries of these two compounds.
PCl3 contains one lone pair on P, AlCl3 contains one π bondA central phosphorus atom is connected to three chlorine atoms, one lone pair of electrons, and three chlorine atoms in PCl3, which has a trigonal pyramidal molecular structure. Because to the comparatively substantial area taken up by the lone pair of electrons, the bond angles deviate from the ideal 109.5° tetrahedral angle, resulting in a bond angle of roughly 107°.
one of the two structures has a resonanceAlCl3 has a planar trigonal molecular shape in contrast. There are no lone pairs on the aluminium atom, which is connected to three chlorine atoms in the centre. The ideal bond angle for a trigonal planar geometry is 120°, and AlCl3's bond angles are quite near that value.
to know more about molecular geometries here:
brainly.com/question/7558603
#SPJ1
PAHs interact with a zeolite by intercalating into the pores. O true O false
the given assignment is true. PAHs to be sure connect with a zeolite by intercalating into the pores.
PAHs to be sure connect with a zeolite by intercalating into the pores.
To sequester means to keep a particle in the arrangement from acting typically by shaping a coordination compound.
A zeolite doesn't sequesters PAHs by the development of long-lasting covalent bonds but by shaping a coordination compound.
(i) The assignment is to figure out which sentence is valid or misleading
(ii) PAH is Polycyclic fragrant hydrocarbons. Hydrogen is off-base.
(iii) Intercalation - the reversible inclusion of a molecule between two others.
Zeolites are minerals, for example, aluminosilicates of sodium, potassium, calcium, or magnesium, that have a permeable design; they are utilized in water conditioners and in particle trade chromatography.
to know more about molecules click here:
https://brainly.com/question/475709
#SPJ4
the complete question is:
Determine which statements are true and which are false. PAH is an acronym for polycyclic aromatic hydrogen. PAHs interact with a zeolite by intercalating into the pores. A zeolite sequesters PAHs by the formation of permanent covalent bonds.
Which are the factors that favor SN2 reactions, as described during the lab lecture?
a) Strong nucleophile, good leaving group, polar protic solvent, methyl or primary halide.
b) Strong nucleophile, good leaving group, polar aprotic solvent, methyl or primary halide.
c) Weak nucleophile, good leaving group, polar aprotic solvent, methyl or primary halide.
d) Strong nucleophile, poor leaving group, polar aprotic solvent, tertiary halide.
e) Strong nucleophile, good leaving group, polar aprotic solvent, tertiary halide.
The factors that favor SN2 (substitution nucleophilic bimolecular) reactions are:
b) Strong nucleophile, good leaving group, polar aprotic solvent, methyl or primary halide.
Strong nucleophile: the more nucleophilic the attacking species, the more likely it is to participate in an SN2 reaction.
Good leaving group: a better leaving group will dissociate more easily from the carbon atom, facilitating the nucleophilic attack.
Polar aprotic solvent: this type of solvent allows for the solvation of the nucleophile, but it does not interfere with the reaction mechanism, which favors the bimolecular nature of the reaction.
Methyl or primary halide: these types of halides have a less hindered environment around the carbon atom, making it easier for the nucleophile to approach the carbon and displace the leaving group.
Therefore, option b) is the correct answer. Options a), c), d), and e) contain at least one factor that is not favorable for SN2 reactions.
For more details about nucleophilic click here:
https://brainly.com/question/30713995#
#SPJ11
after two half-lives, how many of the original nuclei remain, on average? after two half-lives, how many of the original nuclei remain, on average? 1/2 1/8 2 1/4
After two half-lives, 1/4 of the original nuclei remain on average. Let's take a look at how this conclusion is arrived at. After one half-life, half of the original nuclei will have decayed, and half will remain.
If we start with N0 original nuclei, after one half-life, we will have N0/2 remaining nuclei. After another half-life, half of the remaining nuclei will decay, leaving only 1/4 of the original nuclei remaining. On average, 1/4 of the original nuclei remain after two half-lives. This is because radioactive decay is a random process and cannot be predicted exactly, but rather is described using probabilities.
for more such questions on half-lives.
https://brainly.com/question/22855047
#SPJ11
c. How would changing a coefficient differ from changing the subscript?
Answer:
when you change the subscripts, you are changing the substance itself
how many moles of sodium hydroxide would have to be added to 150 ml of a 0.391 m acetic acid solution, in order to prepare a buffer with a ph of 4.730?
The number of moles of sodium hydroxide you would have to add to the acetic acid solution, in order to prepare a buffer with a pH of 4.730 is 0.05222 mol.
To prepare a buffer with a pH of 4.730 using a 0.391 M acetic acid solution and sodium hydroxide, you'll first need to determine the amount of moles of acetic acid and sodium acetate (conjugate base) required using the Henderson-Hasselbalch equation:
pH = pKa + log([A⁻]/[HA])
For acetic acid, the pKa value is approximately 4.76. Rearrange the equation to find the ratio of [A⁻]/[HA]:
10^(pH-pKa) = [A⁻]/[HA]
10^(4.730-4.76) = [A⁻]/[HA]
[A⁻]/[HA] = 0.8904
Now, find the initial moles of acetic acid in the 150 mL solution:
moles of HA = (0.391 mol/L) * (0.150 L) = 0.05865 mol
Using the [A⁻]/[HA] ratio, calculate the moles of sodium hydroxide (NaOH) needed to convert acetic acid into sodium acetate:
moles of A⁻ = (0.8904) * moles of HA = 0.8904 * 0.05865 mol = 0.05222 mol
So, you need to add 0.05222 moles of sodium hydroxide to prepare a buffer with a pH of 4.730.
Learn more about Henderson-Hasselbalch equation here: https://brainly.com/question/26746644
#SPJ11
using the ph curve you derived for acetic acid and naoh titration, what is the acid dissociation constant, pka, for acetic acid, ?
Assuming that the octet rule is not violated, what is the formal charge on N in the cation [H2NSF2]+ (connectivity as written)?
+2
+1
0
-1
-2
none of these answers is correct
The formal charge on N in the cation [H2NSF2]+ (connectivity as written) is +1.
What is the formal charge?
The formal charge of an atom in a molecule can be calculated using the following equation:
Formal charge = Valence electrons - (non-bonding electrons + 1/2 bonding electrons)
The octet rule can be defined as the tendency of atoms to gain or lose electrons to form a complete set of eight valence electrons in their outermost energy level.
The Lewis structure for the cation [H2NSF2]+ (connectivity as written) is:
H-N(+)-S(-)-F(+)..F(-)
The number of valence electrons present in the nitrogen (N) atom is five.
In the structure given above, the nitrogen atom is bonded to two hydrogen atoms, and a single bond is present between the nitrogen (N) and sulfur (S) atoms.
Let's calculate the formal charge on N.
Formal charge on N = valence electrons -- (non-bonding electrons + 1/2 bonding electrons) Valence electrons in N = 5
Non-bonding electrons in N = 0
(Each bond has two electrons, therefore, the number of bonding electrons is 2)
Number of bonding electrons in N = 2
Formal charge on N = 5 - (0 + 1) = +4
Since nitrogen has a charge of +4 in the ion, the formal charge on N is -4.
The correct option is +1.
To know more about the octet rule https://brainly.com/question/30779148
#SPJ11
which polymer would you expect to have the higher yield strength: (a) the high molecular weight polymer or (b) the low molecular weight polymer? (assume the polymer chemistry and all other structural features are identical.)
The high molecular weight polymer is expected to have a higher yield strength than the low molecular weight polymer. The reason for this is that the yield strength of a polymer is directly related to its molecular weight.
A polymer is a material made up of many molecules bonded together in a repetitive pattern. Polymers can be natural, such as cellulose or proteins, or synthetic, such as polyethylene and polypropylene. Polymers are used in a variety of applications, including packaging, construction, and biomedical engineering.
Yield strength is a measure of a material's ability to resist deformation under stress. It is the point at which a material will no longer return to its original shape after being deformed. In general, a higher yield strength indicates a stronger material.
In conclusion, the high molecular weight polymer is expected to have a higher yield strength than the low molecular weight polymer, assuming the polymer chemistry and all other structural features are identical.
To learn more about "yield strength", visit: https://brainly.com/question/29673011
#SPJ11
the first energy level of an atom is filled. its second energy level contains three additional electrons. what element is this atom?
The element whose first energy level is filled, and second energy level has three additional electrons is lithium.
An atom has 2 electrons in its first energy level (K) and 8 electrons in its second energy level. As a result, if an atom has three more electrons in its second energy level and its first energy level is filled, it must be lithium (Li), which has three total electrons.
"Energy levels" refer to the areas around the nucleus where an atom's electrons are positioned. The area surrounding the nucleus in three dimensions that is most likely to contain electrons is represented by an energy level. Subsequent energy levels are known to represent the respective rows of the periodic table of the elements.
To know more about the energy levels, refer:
https://brainly.com/question/10578178
#SPJ4
How many grams are there in 8.25 L of oxygen gas (O2)
HELP!!!!!
There are 11.79 grams of oxygen gas in 8.25 liters of oxygen gas at STP.
How to find the gramsTo convert from liters to grams of a gas, we need to know the density of the gas at the given temperature and pressure.
The density of oxygen gas can vary depending on its temperature and pressure, but at standard temperature and pressure (STP), which is 0 °C and 1 atm pressure, the density of oxygen gas is 1.429 g/L.
Therefore, to find the mass of oxygen gas in 8.25 L at STP, we can use the following equation:
mass = volume x density
mass = 8.25 L x 1.429 g/L
mass = 11.78825 g
Learn more about oxygen gas at:
https://brainly.com/question/18609914
#SPJ1
Two objects of the same mass and are the same temperature. The same amount of heat is added to each of them. Object A creates a higher temperature than object B and no phaseb changes occurred which samples is made of the substance with a higher specific heat capacity?
Answer: I don’t know ask my teacher
Explanation:
The sample made of the substance with a higher specific heat capacity would be object B.
What is specific heat capacity?If two objects of the same mass and same initial temperature are given the same amount of heat, but one of them (Object A) experiences a greater temperature increase than the other (Object B), then Object A must have a lower specific heat capacity than Object B.
The specific heat capacity is a measure of how much heat energy is required to raise the temperature of a substance by 1 degree Celsius. A substance with a higher specific heat capacity requires more heat energy to raise its temperature by the same amount compared to a substance with a lower specific heat capacity.
In this case, since both objects received the same amount of heat energy but Object A experienced a greater temperature increase than Object B, we can conclude that Object A must have a lower specific heat capacity than Object B.
Therefore, the sample that is made of the substance with the higher specific heat capacity must be Object B.
More on specific heat capacity can be found here: https://brainly.com/question/28941910
#SPJ1
solar, hydropower, geothermal, and wind energy are examples of what type of energy?
Solar, hydropower, geothermal, and wind energy are examples of renewable energy sources.
Renewable energy sources are those that are replenished naturally and can be used repeatedly without the risk of depletion. They are a sustainable alternative to non-renewable energy sources such as fossil fuels, which are finite resources and can have a negative impact on the environment.
Solar energy is harnessed from the sun, hydropower from flowing water, geothermal energy from the Earth's heat, and wind energy from the wind. All of these sources can be used to generate electricity or to provide heating and cooling for homes and buildings.
Renewable energy sources are becoming increasingly important as the world seeks to reduce its dependence on fossil fuels and move towards a more sustainable energy future.
To know more about Renewable energy here
https://brainly.com/question/17373437
#SPJ4
A chemical equation is balanced if the ____ of each kind if ___ is the same on both sides of the equation?
Answer:
a chemical equation is balanced when the number of each type of atom is the same on both sides of the equation.
Explanation:
after running the column and separating the three components, you can evaporate the solvent to isolate the compounds, then add up the total mass recovered and compare to the total mass you began with. if you have time to do so, calculate the percent recovery. why is this not 100%?
When a column is run and the three components are separated, it is possible to isolate the compounds by evaporating the solvent. Then, the total mass recovered is added up and compared to the total mass from the beginning.
The percentage recovery can also be calculated. It is not always 100% because of the following reasons: There is always some amount of loss due to experimental error, like not being able to recover all of the solute from the column. Also, it is hard to recover all of the solvent during evaporation. Finally, some decomposition may occur during the isolation process which reduces the recovery rate. Hence, we can conclude that the percentage recovery is often less than 100%.
Learn more about percent recovery at: brainly.com/question/30335699
#SPJ11
URGENT!!! What element has the electron configuration 1s22s²2p63s²3p4?
A. CI
B. N
C. O
D. S
Answer:
D. S (Sulphur)
Explanation:
you couldve just looked this up lol
DANGERS OF ACIDS AND ALKALIS
Chemical substances with opposing characteristics include acids and alkalis. Alkalis have a pH above 7, while acids have a pH below 7.
What threats do acids pose?Acids are dangerous when there is moisture in the mouth, eyes, or surrounding aqueous solutions because they react violently with water. Certain acids' vapours can harm the eyes, nasal passages, throat, and lungs since they are soluble in water.
What poses the biggest threat to acids and bases?Working with acids and bases poses health risks mostly because of their corrosivity, which causes tissue to be destroyed. The pernicious characteristic of hydrofluoric acid, or HF, which causes severe loss of skin without providing any burning sensation.
To know more about Alkalis visit:-
https://brainly.com/question/18153051
#SPJ1
Question:
What are the potential dangers associated with acids and alkalis?
when will a reaction be spontaneous if the change in enthalpy is exothermic and the system is getting more disordered?
The free energy change is always negative and the reaction is always spontaneous if the reaction is exothermic (H is negative) and the entropy S is positive (greater disorder).
Is an exothermic reaction usually spontaneous when the entropy is high?No of the temperature, a process that simultaneously produces heat and raises entropy is always spontaneous (has a negative G). A similar reaction will be non-spontaneous (positive G) at all temperatures if it both absorbs heat and reduces entropy.
Can a process be exothermic and less disorderly and yet be spontaneous?As long as the temperature is low, an exothermic process that reduces disorder and is exothermic cannot be spontaneous. A procedure cannot be unplanned if it is endothermic, and as long as the temperature is high, there is a rise in disorder.
To know more about exothermic visit:-
https://brainly.com/question/4345448
#SPJ1
What mass of water required 4703J of energy to heat it from 25°C to 50°C?
Approximately 56.5 grams of water were required to heat from 25°C to 50°C with 4703J of energy.
The amount of energy required to heat a substance can be calculated using the formula:
Q = mcΔT
where Q is the amount of energy required, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.
We can rearrange this formula to solve for the mass of the substance:
m = Q / (cΔT)
In this problem, we are given the energy (Q) and the initial and final temperatures, so we can use the formula to solve for the mass:
Q = 4703 J
ΔT = 50°C - 25°C = 25°C
c (specific heat capacity of water) = 4.184 J/(g°C)
m = Q / (cΔT) = 4703 J / (4.184 J/(g°C) x 25°C) ≈ 56.5 g
Therefore, approximately 56.5 grams of water were required to heat from 25°C to 50°C with 4703J of energy.
What is substance?
A substance is a form of matter that has a specific chemical composition and distinct physical properties. It can be an element or a compound, and it cannot be separated into simpler components by physical means such as filtration or distillation.
To know more about substance, visit:
https://brainly.com/question/24372098
#SPJ1
what is the hybridization of the carbon attached to three hydrogens in acetic acid?
The hybridization of the carbon attached to three hydrogens in acetic acid is sp³ hybridization.
Hybridization is a phenomenon that occurs when atomic orbitals combine to form hybrid orbitals. The term hybridization is used to describe the method by which valence bond theory explains the geometry of a molecule. The carbon atom attached to three hydrogens in acetic acid is sp³ hybridized because it is a tetrahedral structure in which the four electrons of the carbon atom are bonded to four different atoms or groups.
Acetic acid, with the molecular formula CH₃COOH, has one carbon atom with a central bond to one oxygen and double bonds to the other oxygen and carbon atoms. Each of the carbon's two bonds has an sp² hybrid orbital, while the carbon attached to three hydrogen atoms has a tetrahedral configuration, indicating that it is sp³ hybridized.
For more question on hybridization click on
https://brainly.com/question/28468454
#SPJ11
what two parameters are plotted in an absorbance spectrum?
The two parameters that are commonly plotted in an absorbance spectrum are the wavelength of light (measured in nanometers, or nm) on the x-axis, and the absorbance (or optical density) on the y-axis.
What is measured by an absorbance spectrum?The amount of light absorbed by a sample is calculated as a function of wavelength in absorbance spectroscopy, also referred to as absorption spectroscopy. This can provide crucial details about an atom's or molecule's electronic structure.
What does the term "absorption spectrum" mean?Various radiation is absorbed by chemicals and elements when it passes through them, depending on the chemical or element in question. In the emission spectrum, coloured lines can be observed exactly where the dark line pattern appears.
To know more about spectrum visit:-
https://brainly.com/question/6836691
#SPJ1
In which parts of the table do you find the greatest and lowest attraction for electrons?
The greatest and lowest attraction for electrons is found in upper right-hand corner and lower left-hand corner respectively.
The attraction of an atom's nucleus for its electrons is determined by its atomic number, which corresponds to the number of protons in the nucleus.
As we move across a period from left to right in the periodic table, the atomic number increases, and the attraction for electrons increases as well. Therefore, the greatest attraction for electrons is found in the upper right-hand corner of the periodic table. This is where the nonmetals are located. In contrast, as we move down a group or column in the periodic table, the atomic number increases, but the attraction for electrons decreases because the electrons are further from the nucleus.
Therefore, the lowest attraction for electrons is found in the lower left-hand corner of the periodic table where the alkali metals and alkaline earth metals are located.
To learn more about electrons refer to:
brainly.com/question/28977387
#SPJ4
What is the balanced chemical equation for each of these. The formation of ammonium nitrate, which has ^(triangle) H of -365. 1 kj
the decomposition of manganese (IV) oxide, which has ^(< triangle) H of 519. 7 kj
the reaction between H2CO3 and KOH, which releases 21 kcals
(i)The balanced chemical equation for the formation of ammonium nitrate is NH3 + HNO3 → NH4NO3 with a heat of -365.1 kJ. (ii)The decomposition of manganese (IV) oxide is 2MnO2 → 2MnO + O2 with a heat of 519.7 kJ. (iii) H2CO3 + 2KOH → K2CO3 + 2H2O.
Ammonia gas (NH3) and nitric acid (HNO3) combine to create solid ammonium nitrate (NH4NO3), which results in the emission of heat energy (-365.1 kJ). The manufacturing of fertilisers and explosives frequently uses this reaction. When heated with the absorption of heat energy, manganese (IV) oxide decomposes into solid manganese oxide (MnO) and oxygen gas (O2) (519.7 kJ). In laboratory research and commercial procedures, this reaction is frequently employed to generate oxygen gas. Potassium hydroxide (KOH) and carbonic acid (H2CO3) combine to generate solid potassium carbonate (K2CO3) and water (H2O), with the process releasing 21 kcal of heat energy.
learn more about chemical equation here:
https://brainly.com/question/28294176
#SPJ4