What is the mass of 4.5 moles of sodium fluoride?

Answers

Answer 1
mass of sodium is 23 and mass of fluirine is 19 there mass of NaF is 42
42 g = 1 mole therefor 4.5 moles will have
4.5 × 42 = 189 g

Related Questions

Pls help I’ll mark brainliest

Answers

Answer: I will answer if u Mark me

Explanation:

what happens to ammonia when reacts with heated sodium?​

Answers

When dry ammonia is passed over heated sodium in absence of air, the product formed is sodium amide. - When dry ammonia is passed over heated sodium in absence of air, sodium amide is produced. - Sodium amide aka sodamide is mainly used as a strong base in organic chemistry.

Answer:

When dry ammonia is passed over heated sodium in absence of air, the product formed is sodium amide. - When dry ammonia is passed over heated sodium in absence of air, sodium amide is produced. - Sodium amide aka sodamide is mainly used as a strong base in organic chemistry.

Explanation:

A student says that since the atomic theory is just a theory, it should not be considered useful. Which statement best argues against the student’s opinion?

Scientific theories change over time.
Scientific theories are the results of many experiments and observations.
Scientists often do not agree about specific details of scientific theories.
Scientists often propose competing theories.
Scientific theories do not become Scientific Laws.

Answers

Answer:

srry

Explanation:

Answer:

Scientific theories are the results of many experiments and observations.

Explanation:

Sooo BBBBBBBBB

(Al = 27.0 g, O = 16.0 g, H = 1.0 g)
2 Al(OH)3 Al2O3 + 3 H2O
how many grams are produced from .85 moles of AI(OH)3

Answers

Answer:

Explanation:

21

_NaF + _Br2 →_NaBr + _F2

Answers

Answer:

2NaF + 1Br2 -> 2NaBr + 1F2

Explanation:

2NaF + 1Br2 -> 2NaBr + 1F2

I simply looked at both the left side and right side and saw there was only 1 F on the left side while there were 2 on the right side.

This means we have to make the left side have 2 F by multiplying NaF by 2.

However, this means there are now 2 Na as well. Going back to the right side, I multiplied NaBr by 2 so that there are 2 Na on both sides.

Now there are 2 Br on the right side. Checking back to the left side, there are also 2 Br, meaning this equation is now balanced.

The electron configuration for Zn2 is [Ar] 3d10 and NOT [Ar] 4s23d8. What experimental evidence has been collected that would allow one to conclude that the [Ar]3d10 is correct

Answers

Answer:

Zn2+ is colourless

Explanation:

We know that transition metal salts are usually coloured due to the possibility of d-d transition.

This d-d transition can only occur when there are vacant d-orbitals. The electronic configuration [Ar] 4s23d8 suggests the presence of vacant d-orbitals and the possibility of the compounds of Zn2+ being coloured.

However, the absence of colours in Zn2+ compounds shows that there is no d-d transition(electronic) spectra observed for Zn2+ because the d orbitals are completely filled. This means that the correct electronic configuration of the ion is [Ar] 3d10.

S plus 11r minus fifteen​

Answers

Answer:

s+11r-15

Explanation:

Plz help mee
Sandy soil
A) holds water well
B) contains clay and humus
C) has loose grains and few nutrients

Answers

A

think of this way: in Florida and many other costal places, people have sand in their backyards to limit flooding and things due to being so close to the ocean.

Consider the sodium borohydride reduction of camphor to isoborneol. A reaction was performed in which 1.600 g of camphor was reduced by an excess of sodium borohydride to make 1.062 g of isoborneol. Calculate the theoretical yield and percent yield for this reaction. Theoretical yield: g Percent yield:

Answers

Answer:

62.5%

Explanation:

Number of moles of camphor reacted= 1.6g/152.23 g/mol = 0.011 moles

Since the reaction is 1:1,  then 0.011 moles of isoborenol is also produced.

Theoretical yield of isoborenol produced = 154.25 g/mol * 0.011 moles = 1.698 g

% yield = actual yield/theoretical yield * 100

% yield =  1.062 g/1.698 g * 100

% yield =  62.5%

Why is classification important?

Answers

it is important because it helps scientists to solve problems and do more research
If we were to classify organisms into groups based on their ancestry, characteristics, evolutionary traits, etc., we would have a much easier time studying them in detail. It's like sorting out your school assignments. You might want similar subjects grouped together, and so you can find everything much faster.

The surface area of a star can be estimated based on the stars

Answers

size (length+width) approx.

HELP! WILL GIVE BRAINLIEST DUE SOON

Dome Mountains are formed when:

A: plateaus are eroded away

B: faults rub against each other

C: magma escapes from the crust

D: magma pushes up sedimentary rock

Answers

Answer:

I am not the best to answer this but I think it would be B

Explanation:

Dome Mountains are formed from hot molten material (magma) rising from the Earth's mantle into the crust that pushes overlying sedimentary rock layers upward to form a “dome” shape.
So it’s D.

what is the answer?!!?
Plzzzz help

Answers

Answer:

The planet would stop

Good luck!

The planet will stop I agree

Can someone help me please on this question like quick?

Answers

B
Solar energy does not give off toxic wastes as nuclear energy does (ex. Chernobyl)

Chlorine reacts with sodium and with hydrogen.
Compare the structure and bonding in sodium chloride and hydrogen chloride.

Answers

Answer:

Sodium Chloride has Ionic bond while Hydrogen Chloride has covalent bond.

Explanation:

Na has 11 electrons (2, 8, 1) and need to give away 1 electron to be stable

Cl has 17 electrons ( 2, 8, 7) and needs 1 electron to be stable.

Na transfers 1 electron to CL to form Ionic bond.

While

Hydrogen has 1 electron and shares with Chlorine to be stable.

Covalent bond involves sharing.

Chlorine reacts with sodium to form ionic sodium chloride while chlorine reacts with hydrogen to form covalent hydrogen chloride.

The nature of bonding between atoms depends on their relative difference in electronegativity.

Chemical bonding is the process by which atoms come together to form compounds.

There are different kinds of chemical bonds;

Ionic or electrovalent bondCovalent bondMetallic bond

An ionic bond is formed when there is high electronegativity difference between the bonding atoms. Typically, this type of bond is formed when the electronegativity difference is about 2.0 and above.

For a covalent bond, an electronegativity difference of about 0.4 - 1.7 is considered a polar covalent bond. Lower values of electronegativity difference corresponds to a nonpolar bond.

The electronegativity difference between sodium and chlorine is about 2.23. This corresponds to a pure ionic bond. The compound is composed of chlorine and sodium ion pairs alternately located in a crystal lattice as shown in the image attached.

The  electronegativity difference between chlorine and hydrogen is about 0.96. This corresponds to a polar covalent bond. The negative end of the dipole points towards chlorine while the positive end of the dipole points towards hydrogen.

https://brainly.com/question/6071754

The octane rating of gasoline is a relationship of the burning efficiency of the given gasoline mixture to the burning efficiency of octane (C8H18). Like most hydrocarbons, octane reacts with oxygen gas to produce carbon dioxide and water. The unbalanced equation for this reaction is

Answers

Answer:

C₈H₁₈(l) + O₂(g) ⇒ CO₂(g) + H₂O(l)

Explanation:

Let's consider the unbalanced equation for the combustion reaction of octane.

C₈H₁₈(l) + O₂(g) ⇒ CO₂(g) + H₂O(l)

We can begin balancing H atoms by multiplying H₂O by 9, and C atoms by multiplying CO₂ by 8.

C₈H₁₈(l) + O₂(g) ⇒ 8 CO₂(g) + 9 H₂O(l)

Finally, we get the balanced equation by multiplying O₂ by 12.5.

C₈H₁₈(l) + 12.5 O₂(g) ⇒ 8 CO₂(g) + 9 H₂O(l)

Answer:

The coefficents will be 2, 25 --> 16, 18

Explanation:

Fall is usually a little warmer than spring. And yet, the Sun's path is the same in both seasons. Select all that apply.PLEASE ANSWER CORRECTLY I WILL GIVE BRAINLIEST!-THIS IS SCIENCE

Answers

I don't know the answer sorry I would answer if if I did

Which element easily loses one electron to form a positive ion? (AKS 1c/DOK 1)

A.
Nitrogen (N)

B.
Bromine (Br)

C.
Potassium (K)

D.
Magnesium (Mg)

Answers

Answer:

Potassium

Explanation:

It's in group 1 in the periodic table of elements

What is always true of a strong acid?
A. It does not dissociate at all in solution.
B. It has not been diluted with water.
C. It has more than one hydrogen atom.
D. It dissociates completely in solution.

Answers

Considering the definition of strong acid, it dissociates completely in solution (option D) is always true of a strong acid.

Definition of strong acid

An acid that completely dissociates in solution at constant temperature and pressure is called a strong acid.

In other words, strong acids are completely ionized, that is, in the ionization process they are completely transformed into cations or positive ions and anions or negative ions.

Strong acids are characterized by being very corrosive and have the ability to conduct electrical energy efficiently.

Examples of strong acids are hydrochloric acid (HCI) and hydrobromic acid (HBr).

Summary

It dissociates completely in solution (option D) is always true of a strong acid.

Learn more about strong acid:

https://brainly.com/question/21121916

https://brainly.com/question/16139183

https://brainly.com/question/17633632

#SPJ1

3.0m3 of sulfer dioxide is reacted with 2.0dm3 of oxygen . What volume of sulfur trioxide is form?

Answers

Answer:

3.0 dm^3 of sulphur trioxide is formed

Explanation:

From Gay Lussac's law of combining volumes;

The equation is;

                                                  SO2(g) + 1/2O2(g) ------> SO3(g)

Reacting volumes                       1 vol          1/2 vol             1 vol

Initial volumes                           3.0 dm^3    2.0 dm^3       0.0 dm^3

Final volumes                            0.00 dm^3  1.5 dm^3        3.0 dm^3

Hence, 3.0 dm^3 of sulphur trioxide is formed.

how many moles of each atom in the formula HClO3

Answers

Answer:

H has one mole

Cl has one mole

O has three mole

Explanation:

There is a single Hydrogen, thus there is one mole, this also applies to Cl.

With Oxygen, there are three O's, thus there are three moles of Oxygen.

There are 1 mole of H, 1 mole of Cl, and 3 moles of O.

Number of moles in molecules

The number of moles of an atom present in a molecule is classified as the number located in the lower right corner of that atom in the molecule, for example, in the water molecule below:

                                                 [tex]H_2O[/tex]

you have 2 moles of hydrogen and 1 mole of oxygen.

Thus, in the HClO3 molecule, there are 1 mol of hydrogen, 1 mol of chlorine and 3 mol of oxygen.

Learn more about mole calculation in: brainly.com/question/2845237

What is the mass in grams of 5.2 moles of NaCl?
303.89 g
0.09 g
119.6 g
1828

Answers

Explanation:

mole=mass/molar mass

mass= mole×molar mass

m= 5.2×( 23+35.5)

m= 5.2×58.5

m= 304.2g

What will happen to bring the substance from a solid to a gas?


The substance will lose pressure.


Energy will be added.


Energy will be taken away.


The substance will lose volume.

Answers

Answer:

B) Energy will be added

Explanation:

I just took the test...

A fifth-grade science class puts half of a white tablet in a test tube with 10 milliliters (mL) of water at 21°C (70°F). The tablet bubbles rapidly for three minutes until it is gone. Students record the final temperature at 20°C (68°F). Which choice best identifies evidence that a chemical reaction occurred?

Answers

Answer:

i think it table broke in half

Explanation:

Answer: it would be change in water temperature

Explanation: because the change in the water is the temperature and its is

evaporation

Under identical conditions, separate samples of O2 and an unknown gas were allowed to effuse through identical membranes simultaneously. After a certain amount of time, it was found that 7.88 mL of O2 had passed through the membrane, but only 3.69 mL of of the unknown gas had passed through. What is the molar mass of the unknown gas

Answers

Answer:

146.5g/mol

Explanation:

The volume of  gas effused is directly proportional to the square root of its relative molecular mass.

Let the volume of oxygen gas be V1

Let the volume of the unknown gas be V2

Let the molar mass of oxygen be M1

Let the molar mass of the unknown gas be M2

V1/V2 =√M2/M1

7.88/3.69 = √M2/32

2.14 = √M2/32

(2.14)^2 = M2/32

4.58 = M2/32

M2 = 32*4.58

M2 = 146.5g/mol

PLEASE HELP ME
How many grams of lithium are needed to produce 45 Og of lithium nitride, according to the following process? 6 Li(s) + N2(g) → 2 Li3N(s)​

Answers

The theoretical yield of
Li
3
N
is
20.9 g
.
Explanation:
Balanced Equation
6Li(s)
+
N
2
(
g
)

2Li
3
N(s)
In order to determine the theoretical yield, we must first find the limiting reactant (reagent), which will determine the greatest possible amount of product that can be produced.
Molar Masses
Li
:
6.941 g/mol

N
2
:
(
2
×
14.007
g/mol
)
=
28.014 g/mol

Li
3
N
:
(
3
×
6.941
g/mol Li
)
+
(
1
×
14.007
g/mol N
)
=
34.83 g/mol Li
3
N
Limiting Reactant
Divide the mass of each reactant by its molar mass, then multiply times the mole ratio from the balanced equation with the product on top and the reactant on bottom, then multiply times the molar mass of
Li
3
N
.
Lithium
12.5
g Li
×
1
mol Li
6.941
g Li
×
2
mol Li
3
N
6
mol Li
×
34.83
g Li
3
N
1
mol Li
3
N
=
20.9 g Li
3
N
Nitrogen Gas
34.1
g N
2
×
1
mol N
2
28.014
g N
2
×
2
mol Li
3
N
1
mol N
2
×
34.83
g Li
3
N
1
mol Li
3
N
=
84.8 g Li
3
N
Lithium produces less lithium nitride than nitrogen gas. Therefore, the limiting reactant is lithium, and the theoretical yield of lithium nitride is
20.9 g
.

4 points 15. The diagram below shows the relative positions of Earth, the moon, and the sun. The moon is shown at four possible positions around Earth. 3 Sunlight Sun Earth mo Which position of the moon could result in a lunar eclipse? В. 2 A B ​

Answers

Answer:

b c

Explanation:

Answer: b c

Explanation: i did test

Which are characteristics of electromagnetic waves? Check all that apply.
travel in straight lines and can bounce off surfaces
travel through space at the speed of light
travel only through matter
travel only through space
can bend around objects
move by particles bumping into each other
move by the interaction between an electric field and a magnetic field

Answers

-travel in straight lines and can bounce off surfaces
-travel through space at the speed of light
-can bend around objects
-move by the interaction between an electric field and a magnetic field

The characteristics of electromagnetic waves  are that they  travel in straight lines and can bounce off surfaces,travel through space at  speed of light,can bend around objects,move by interaction between electric field and magnetic field.

What are electromagnetic waves?

The electromagnetic radiation consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.

The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.

In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.The position of an electromagnetic wave in an electromagnetic spectrum is characterized by it's frequency or wavelength.They are emitted by electrically charged particles which undergo acceleration and subsequently interact with other charged particles.

Learn more about electromagnetic waves,here:

https://brainly.com/question/29774932

#SPJ6

1. Determine the mass of 2.5 mol of AgNO3

Answers

Explanation:

1 gram of AGNO3 is 169,87 g/mol

2.5 mole = 2.5×16987

= 42467

Amy set up the following experiment to study how plant growth is influenced by weather conditions. mc052-1 One pot will model normal growing conditions, and the other will model drought conditions. Which of the following factors is it most important for Amy to change to model drought conditions?

Answers

Answer:

lack of sunlight, overcrowded region for shelter of the plants, no nutrients and water supply, etc.

Explanation:

The plants needs favorable climatic conditions and nutrient to grow. Plants need air, sunlight, water, proper temperature, nutrients, etc. grow and make their food. They make their food with the help of sunlight and carbon dioxide by a process called as photosynthesis.

Now in the context, Amy is setting up an experiment where she will study the growth of plants in two models. One in the normal growing conditions and the other in a drought condition.

Drought is considered the most important abiotic factor that limits the growth and adversely affects the growth and the crop. The factor that is important for Amy to change the model into a drought conditions is the lack of water and carbon dioxide in the atmosphere. Also scarcity of sunlight and nutrients. The drought stress is considered as one of the crop performance limiting factors.

Other Questions
va rog ajutati ma am test plssssssssssss please Match the government types with the definitions. Is the following function LINEAR or NONLINEAR?y = 8x+ 5linearnonlinear Ill give brainliest asap!!!!!!Which idea is most closely associated with self-determination during the civil rights era?A. The desire to succeed by white anglo-saxon standardsB. The adherence to traditional rural valuesC. The implementation of affirmative actionD.The embracing of purely African American values Multiply: (x+3)(x - 4) What is the middle term in the simplified product? O O -xO 3x O -4x in mexico, chili powder or __ are sometimes added to chocolate The prices of different items at a food market are shown in the table. Kevin wants to purchase 2.5 pounds of beef and 1.8 pounds of chicken. How much does he spend?Item Price (per pound)Beef $11.99Chicken $6.49 plz help will mark brainliest if correct 20 points The Crucible5. Panic is one of the main themes of the Salem Witch Trials. Why do people panic and make irrational decisions in times of stress? Which characters gave into panic the most? Submit your detailed description of five ways animals contribute to your life and the lives of those around you. 05.04 New land50 pointsStep One: Choose a format.Your advertisement may be:song lyricstext for a newspaper advertisementWrite your song or advertisement. Include this information:why people should gowhere they should gohow to get therewhat to bringwhat life will be likewho they may meetpossible dangersYou should be creative in your advertisement, but also honest. Review this learning object for help creating a persuasive argument. Even though these tips are designed for a written argument, the same ideas apply to other kinds of communication, like commercials, songs, and speeches. Solve for p.8p-4p=2p+6 Fill in the blank with the right answer. According to the chart, which type of school had more students? schools I need help with this"Kyle has run 7 laps around the track. If he plans to run 15 laps, how many more laps must he run?" PLEASE PLEASE PLEASE HELP ME WITH THIS QUESTION. Match the following terms with the appropriate definition. I am cold in French Are the two atoms shown below in the image from the same element? Deandre is driving to Denver. Suppose that the distance to his destination (in miles) is a linear function of his total driving time (in minutes). Deandre has miles to his destination after minutes of driving, and he has miles to his destination after minutes of driving. How many miles will he have to his destination after minutes of driving g Studies have found that firms with large investments in tangible assets tend to have: Group of answer choices the highest financial distress costs of any firm per dollar of debt. higher target debt-equity ratios than firms that primarily invest in intangible assets. the same capital structure as firms that specialize in intangible asset investments.