What is the mass of 4 moles of iron?
13.961 g/mol
55.845 g/mol
223.38 g/mol
446.76 g/mol

The atom economy for this reaction to produce nickel is approximately 44%.

What is Percentage Composition?

Percentage composition is a term used in chemistry to describe the percentage by mass of each element in a chemical compound. It is calculated by dividing the mass of each element by the total mass of the compound and multiplying by 100%. For example, the percentage composition of water (H2O) can be calculated by dividing the mass of hydrogen by the total mass of the compound (2 x 1.008 g / 18.015 g) and multiplying by 100%, which gives approximately 11.2%.

To calculate the atom economy, we need to compare the mass of the desired product (Ni) with the total mass of all the reactants.

The molar mass of NiO is 74.71 g/mol, and the molar mass of CO is 28.01 g/mol.

The equation shows that 1 mol of NiO reacts with 1 mol of Ni to produce 1 mol of Ni and 1 mol of CO.

The mass of 1 mol of Ni is 58.69 g.

74.71 g (NiO) + 58.69 g (Ni) = 133.4 g

The mass of the desired product (Ni) is 58.69 g.

Therefore, the percentage atom economy is:

(58.69 g / 133.4 g) x 100% = 44.04%

So the atom economy for this reaction to produce nickel is approximately 44%.

Learn more about Percentage Composition from given link

https://brainly.com/question/17021926

#SPJ1

0.312 moles of dinitrogen monoxide will be  produced upon complete reaction of 25.1 g of ammonium nitrate.

Ammonium nitrate is a chemical compound with the chemical formula of NH 4NO 3 and is a white crystalline salt consisting of ions of ammonium and nitrate.

NH4NO3 → N2O + 2H2O

Molar mass of NH4NO3 = 80.04 g/mol

Number of moles of NH4NO3 = 25.1 g / 80.04 g/mol = 0.312 moles

According to the balanced chemical equation, 1 mole of NH4NO3 produces 1 mole of N2O. Therefore, 0.312 moles of NH4NO3 will produce 0.312 moles of N2O.

0.312 moles of dinitrogen monoxide will be formed after the reaction of 25.1 g of ammonium nitrate.

To know more about ammonium nitrate, refer

https://brainly.com/question/29341539

#SPJ1

Taking into account the reaction stoichiometry, 33.108 grams of NH₄HO are formed if excess ammonium sulfate reacts with 35.0 grams of calcium hydroxide.

In first place, the balanced reaction is:

(NH₄)₂SO₄ + Ca(OH)₂ → CaSO₄ + 2 NH₄HO

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amount of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The following rule of three can be applied: if by reaction stoichiometry 74 grams of Ca(OH)₂ form 70 grams of NH₄HO, 35 grams of Ca(OH)₂ form how much mass of NH₄HO?

mass of NH₄HO= (35 grams of Ca(OH)₂ ×70 grams of NH₄HO) ÷74 grams of Ca(OH)₂

mass of NH₄HO= 33.108 grams

Finally, 33.108 grams of NH₄HO are formed.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

#SPJ1

where L represents ice's 334 J/g latent heat of fusion. To account for the energy required to melt the ice, we must include this term. The response is 13.7 g.

Let's use the following formula:

Q = mcΔT

where Q is the amount of heat gained or lost, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.

For water, the specific heat capacity is 4.18 J/g°C, and for ice, it is 2.09 J/g°C.

First, let's calculate the amount of heat lost by the water:

Q1 = mcΔT = 30 g × 4.18 J/g°C × (45°C − 0°C) = 5658 J

Now, let's calculate the amount of heat gained by the ice:

Q2 = mcΔT + mL = m × 2.09 J/g°C × (0°C − (−15°C)) + m × 334 J/g = m × (314.15 J/g)

where L is the latent heat of fusion for ice, which is 334 J/g. We need to add this term to account for the energy needed to melt the ice.

Since Q1 = Q2, we can solve for m:

m = Q1 / (mcΔT + mL) = 5658 J / (30 g × 2.09 J/g°C × (0°C − (−15°C)) + 30 g × 334 J/g) ≈ 13.7 g

Therefore, the answer is 2. 13.7 g.

to know more about liquid water here:

brainly.com/question/18761083

#SPJ1

The parts of an ecosystem are population, community, organism.

The term "ecosystem" was originally used in an article by British ecologist Arthur Tansley in 1935. Tansley requested that Arthur Roy Clapham think of the term, and he did. Tansley came up with the concept to emphasise the importance of material exchanges between living things and their environment.

Humans have an impact on and alter fundamental ecological processes as ecosystem components, which in turn affects us as individuals and members of society.

An ecosystem that is flourishing and diverse provides its inhabitants with an abundance of necessities like food, water, shelter, economic livelihood, leisure, and scenic beauty.

All the zebras form a population.

Zebras, gazelle, giraffes, trees form a community

A giraffe: organism

Gazelle, zebras, giraffes, water, trees, soil: ecosystem

To learn more about ecosystem from given link

https://brainly.com/question/15830752

#SPJ1

Complete question -

Use the image to match the parts of an ecosystem to each description.

All the zebras form a ___________.

Zebras, gazelle, giraffes, trees form a _______________

A giraffe: _____________-

Gazelle, zebras, giraffes, water, trees, soil: _________

The chemical change of decomposition of barium fluoride will give barium and fluoride ions.

Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.

There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.

Learn more about chemical change,here:

https://brainly.com/question/23693316

#SPJ1

The balanced chemical equation for the given reaction is: 2IrCl3(aq) + 3NaOH(aq) → Ir2O3(s) + 3HCl(aq) + 3NaCl(aq)

Use the atomic masses to translate each element's mass into moles. By dividing the total number of moles by the smallest number of moles, you may determine the ratio or the number of moles of each element.

The mole ratio of the reactants and products are represented by the coefficients in a balanced chemical equation. Hence, the total mole ratio for the indicated reaction is:

2 moles of IrCl3 : 3 moles of NaOH : 1 mole of Ir2O3 : 3 moles of HCl : 3 moles of NaCl

This can also be expressed in simpler terms as:

2:3:1:3:3

As a result, 3 moles of NaOH are needed to completely react with every 2 moles of IrCl3. 3 moles of HCl, 3 moles of NaCl, and 1 mole of Ir2O3 are the end products.

To know more about mole visit:-

https://brainly.com/question/30759206

#SPJ1

Answer:

mass of O₂ produced is 576 grams.

What is the stoichiometry of a reaction?

Stoichiometry is the ratio of reactant particles to product particles in a reaction.

2NaClO₃(s) → 2NaCl(s) + 3O₂(g)

Therefore, in the reaction above, the stoichiometry is 2 : 2 : 3. i.e, two parts of NaClO₃ will produce 2 parts of NaCl and 3 parts of O₂.

Hence, if 12.00 moles of NaClO₃ is used, then, moles of O₂ = 3/2 × (12.00) = 18.00 moles.

To calculate mass in grams of O₂ produced, multiply number of moles by molar mass.

m(O₂) = n×M = 18.00×(16×2) = 576 g

Therefore, mass of O₂ produced is 576 grams.

Answer:

The effect of fertilization on atmospheric carbon dioxide emissions depends on the type of fertilization and the specific context in which it is used. In some cases, fertilization can lead to a positive feedback loop that increases carbon dioxide emissions, while in other cases, it can have a negative feedback loop that reduces emissions.

When fertilizers are applied to agricultural crops, they can increase the productivity and yield of the plants, leading to increased carbon dioxide uptake through photosynthesis. This can have a negative feedback loop, as more carbon is sequestered from the atmosphere and stored in the soil and plant biomass.

However, excessive use of fertilizers can lead to a positive feedback loop. The excess nutrients can cause algal blooms in bodies of water, which can lead to oxygen depletion and the release of carbon dioxide and other greenhouse gases. Moreover, over-fertilization can lead to the degradation of soil health, which can reduce the carbon sequestration potential of soils.

Overall, the impact of fertilization on carbon dioxide emissions depends on various factors such as the type and amount of fertilizer used, the management practices, and the ecological context in which they are applied. It is important to use fertilization practices that support sustainable and regenerative agriculture, minimize greenhouse gas emissions, and promote soil health.

Answer:

0.085049833

Explanation:

use the formula n=number of particles/Avogadro's number and find the value of n which is miles and then use the formula n=mass/molar mass. The molar mass you multiply the mass number of oxygen by 2

molar mass= 32g/mol

Avogadro's number=6.02*10^23

number of particles=1.6*10^21

Answer:

The Kinetic Molecular Theory states that gas particles are in constant motion and exert no attractive forces on each other. This means that gas particles can move around freely and have no interactions with each other. Real gases, however, have molecules that are much larger than ideal gas molecules and are subject to attractive forces. These attractive forces between molecules cause the gas particles to be attracted to each other, resulting in increased pressure, lower temperature, and lower volume than that of an ideal gas in the same situation. This means that real gases do not behave ideally, as they are not in a perfect state of random motion, and their pressure and temperature are lower than those of an ideal gas

Explanation:

Answer:

combined gas law, which relates the pressure, volume, and temperature of a gas. The combined gas law is given by:

P1V1/T1 = P2V2/T2

Where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.

In this problem, the temperature remains the same, so we can simplify the combined gas law to:

P1V1 = P2V2

Substituting the given values into the equation, we get:

760 mmHg × 2.5 L = 304 mmHg × V2

Solving for V2, we get:

V2 = (760 mmHg × 2.5 L) / 304 mmHg

V2 ≈ 6.26 L

Therefore, the final volume of the gas is approximately 6.26 L.

Explanation:

Mammals and birds have a unique metabolic process that allows them to generate their own body heat, known as endothermy or warm-bloodedness. This means that they can regulate their body temperature internally, regardless of the external temperature.

The process of generating heat requires a lot of energy, which is primarily produced through the breakdown of nutrients, such as glucose and fatty acids, obtained from food. The mitochondria, which are present in almost all cells of the body, play a critical role in this process. They use oxygen to convert these nutrients into energy in the form of ATP (adenosine triphosphate), which powers the metabolic processes necessary for maintaining body temperature.

Mammals and birds also have specialized tissues that help generate and conserve heat, such as brown adipose tissue and feathers. These tissues contain a high density of mitochondria, which allows for more efficient energy production and heat generation.

Overall, the ability of mammals and birds to generate their own heat is a key adaptation that enables them to thrive in a wide range of environments, from the icy poles to the scorching deserts.

156

because it has the electorns in the state by the groubd

Early geologists identified four features while examining sedimentary rock layers: strata or layering, fossils, angular unconformities, and cross-bedding.

Rock fragments from other types of existing rocks or organic substance are used to create sedimentary rocks. Clastic, organic (biological), and chemical sedimentary rocks are the three distinct types of sedimentary rocks. Sandstone is a type of clast sedimentary rock, which is formed from fragments of other minerals.

Igneous rock includes granite. Material is deposited, weathered, and other mechanisms that cause organic or mineral particles to settle down and collect result in the formation of sedimentary rock. All varieties of marble, as well as volcanic rocks like travertine and onyx, contain fossils.

To know more about sedimentary rock visit :

https://brainly.com/question/26142315

#SPJ1

keeps soils at a comfortable temperature. Composting helps to keep soil temperatures at a consistent level, which helps to optimize the growth of beneficial organisms and plants.

Temperature is a measure of the degree or intensity of heat or cold in a body or environment. Temperature is measured using a thermometer, which is an instrument that detects the temperature of an object or environment by measuring the intensity of certain physical properties such as thermal expansion of gas, electrical resistance or the velocity of sound. Temperature is typically measured in degrees Celsius (°C) or degrees Fahrenheit (°F). When the temperature of a body or environment is higher than usual, it is said to be hot; when it is lower than usual, it is said to be cold.

To learn more about temperature
https://brainly.com/question/2339046
#SPJ1

Answer:

c. makes nutrients more accessible to organisms

Explanation:

i took the test

Beryllium, calcium, and mg are all known to be group 2 elements. Be's atomic number is 4, while those of magnesium and calcium are 12 and 20, respectively.They frequently produce an ion with a +2 charge as a result.

Alkaline Since they rapidly give it up their two electrons of valence to reach a full outside energy level, resulting in the most stable configuration of electrons, earth metals are extremely reactive.From of the top to to bottom of the group, reactivity rises.

the reason why beryllium is less reactive than calcium | Fandom.Although the two elements belong to the same group, calcium's valence electrons are located further from the nucleus.They are easily released because the nucleus does not hold them tightly.Higher reactivity is also a result of easily released electrons.

To know more about magnesium and calcium visit:

https://brainly.com/question/11879757

#SPJ1

If the adhesion and cohesion forces were equal in a graduated cylinder, there would be no meniscus formation. This is because the shape of a meniscus is a result of the difference in strength between the adhesive and cohesive forces between the liquid and the surface it comes into contact with.

If the adhesive forces were equal to the cohesive forces, the liquid would not be attracted more strongly to the surface of the container than to its own molecules. As a result, the surface of the liquid would be flat and level with the edge of the container. This is the case with mercury, which has approximately equal cohesive and adhesive forces, resulting in a flat surface in a container.

However, in most cases, the adhesive forces between a liquid and a container are stronger than the cohesive forces between the liquid molecules themselves, resulting in a concave meniscus. This is because the liquid is attracted more strongly to the surface of the container than to its own molecules, causing the surface of the liquid to curve downward at the edges. On the other hand, if the cohesive forces were stronger than the adhesive forces, the liquid would form a convex meniscus, with the surface of the liquid curving upward at the edges. This is the case with water in a hydrophobic container, such as a wax-coated or greasy container.

When the temperature is 2°C, a gas sample is collected in a 2. 2-L tank. the Kelvin temperature of the gas is 275.15K

To convert a temperature from Celsius to Kelvin, simply multiply it by 273.15 degrees Celsius. So, in this instance, we have:

Celsius temperature + 273.15 K Kelvin temperature = 2°C + 273.15 K Kelvin temperature = 275.15 K

As a result, the gas's Kelvin temperature is 275.15 K.

The Kelvin temperature unit is used in the scientific community. It is an absolute temperature scale, with 0 Kelvin representing the absolute coldest temperature possible.

One Kelvin degree is the same size as one Celsius degree, but the zero point on the Kelvin scale is 273.15 degrees different from the Celsius scale. To convert a temperature from Celsius to Kelvin, simply multiply it by 273.15 degrees Celsius. Kelvin temperatures are widely used in scientific and engineering applications, especially thermodynamics and materials science.

learn more about Kelvin here:

https://brainly.com/question/29082662

#SPJ4

The final temperature of the water will be approximately 50.0°C (to two significant figures).

To solve this problem, we need to use the specific heat capacity equation:

q = m * c * ΔT

where

q is the amount of heat energy added,

m is the mass of the water,

c is the specific heat capacity of water, and

ΔT is the change in temperature.

First, we need to determine the initial temperature of the water. We are given that the water is initially at 40.0°C.

Next, we can calculate the amount of heat energy that is added to the water:

q = 418 J

m = 10.0 grams.

c is 4.184 J/g°C.

We can rearrange the equation to solve for ΔT:

ΔT = q / (m * c)

ΔT = 418 J / (10.0 g * 4.184 J/g°C) = 9.99°C

This is the change in temperature of the water. To find the final temperature, we add this to the initial temperature:

Final temperature = 40.0°C + 9.99°C = 49.99°C

Learn more about heat energy at:

https://brainly.com/question/19666326

#SPJ1

The mass of water in kg must evaporate in order for the person's body temperature to remain constant is 0.0243 kg.

Internal energy, which emerges from the molecular state of motion of matter, is an energy form inherent in all systems. Internal energy is represented by the symbol U, and the unit of measurement is the joule (J).

Let mass of the body be x

We have,

enthalpy = 44.016 kj mol-1

Temperature be 298 K

As ideal gas,

Δ = 44.016 - x/18 x 8.314 x 10⁻³ x 298 K

40.66 = 44.016 - x/18

-3.356 x 10³/8.314 x 298 = x/18

-1.35 = x/18

x = 24.3 g

So the amount of water be 0.0243 kg.

Internal energy increases when temperature rises and states or phases transition from solid to liquid and liquid to gas. Planetary bodies can be viewed as hybrids of heat reservoirs and heat engines. Internal energy E is stored in the heat reservoirs, and heat engines transform some of this thermal energy into mechanical, electrical, and chemical energies.

Learn more about Mass of water:

https://brainly.com/question/13188500

#SPJ4

Due to the gravitational force the moon orbit earth in the same direction that earth orbits the sun.

What is gravitational force ?

Newton's Law of Gravitation and the force of gravity. The force of attraction between any two bodies is known as gravity, or simply gravity. All objects in the cosmos are attracted to one another with some force, but most of the time this attraction is too faint to be noticed due to the extreme distance between the objects.

Distance is an object's overall movement, regardless of direction. Distance refers to the length of an object's real route as a whole. The displacement of an object between two points is defined as the straight line distance (shortest distance), measured from one position to the other.

Therefore, Due to the gravitational force the moon orbit earth in the same direction that earth orbits the sun.

Learn more about gravitational force from the given link.

https://brainly.com/question/29633876

#SPJ1

The Molarity of the solution is 0.040M and the correct option is option A.

Molarity, also called molar concentration, is used to measure the quantity of a solute dissolved in a volume of solvent using the formula-

Molarity = number of moles of solute ÷ volume of solution in liters

Molarity of a solution is measured in moles per liter and is denoted by M.

When 1 mole of a substance is dissolved in water and the solution is made up to 1L, a solution with a molarity of 1M is produced.

Given,

Mass of aluminium chloride = 20g

Volume of solution = 500 ml

Molarity = mass of solute ÷ volume of the solvent in L

= 20 ÷ 500

= 0.040 M

Therefore, the Molarity of the solution is 0.040M and the correct option is option A.

Learn more about Molarity, here:

https://brainly.com/question/8732513

#SPJ9

Because it costs the least per kilogram, sodium chloride is the most cost-effective option for a road deicer based on the information provided.

Silicon dioxide is less effective at melting ice and costs significantly more than calcium chloride. However, it is important to take into account factors like temperature, humidity, and the presence of other materials on the road surface when selecting a deicer because different deicing materials may be more effective in different conditions.

The process of removing or preventing the formation of ice on roads and highways during winter weather conditions is known as road deicing. Since ice can make roads dangerously slick and slippery, this is essential for maintaining safe driving conditions.

Rock salt, or sodium chloride, is the most common deicing material. It is applied to the road surface to melt the ice and prevent new ice from forming. Deicing can also be done with other materials like calcium chloride and magnesium chloride.

Learn more about road deicing:

brainly.com/question/18729522

#SPJ1

Answer:

Coal is considered to be a nonrenewable resource.

The equilibrium constant of the reaction is  [CO₂]/([C][O₂]).

The equilibrium constant for the reaction:

C + O₂ = CO₂

can be written as:

Kc = [CO₂]/([C][O₂])

where;

The equilibrium constant Kc depends on the temperature and pressure of the system. At a given temperature and pressure, Kc is constant for a particular reaction, and it indicates the relative amounts of reactants and products at equilibrium.

The actual value of Kc for the given reaction can be determined experimentally, but it is approximately 1.00 x 10^23 at 25°C, which indicates that at equilibrium, the reaction heavily favors the formation of CO₂.

Learn more about equilibrium constant here: https://brainly.com/question/19340344

#SPJ1

The percent yield of the compound C₅H₁₂ when 3. 00 g of C₅H₁₂ were obtained in the reaction of 5. 00 g of C₃H₄ is 4.16%.

In the actual world, chemical processes do not always happen as intended. Apart from spills and other experimental failures, there are frequently losses as a result of an incomplete reaction, unwanted side reactions, and so on. Chemists require a metric that reflects the success of a reaction. This is referred to as the percent yield.

To calculate the percent yield, first establish how much of the product should be created using stoichiometry. The theoretical yield is the greatest quantity of product that can be created from the given quantities of reactants. The amount of product created when the reaction is carried out in the laboratory is referred to as the real yield.

We have equation as,

5C₃H₄ + 8H₂ → 3C₅H₁₂

We have 3 grams of C₅H₁₂

we have 5 grams of C₃H₄

Theoretical yield = C₅H₁₂ = 5 x 12 + 12 x 1 = 72

So percent yield  = actual yield / Theoretical yield x 100

= 3/ 72 x 100

= 0.04167 x 100

= 4.16 %

So percentage yield is 4.16%.

Learn more about Percent Yield:

https://brainly.com/question/14714924

#SPJ4

The reaction was spontaneous and results in a standard free energy shift of 61.5 kJ.

We define the normal state of any solid or liquid material as the most solid region of that material at the a stress of one bar at any given temperature.For instance, water's standard condition for a temperature of 10 C is ice at the a tension of one bar, and for a temperature of +10 C is liquid at the a compression of one restaurant.

India's average temperature for 2021 was 25.93 ° Celsius, a little increase from 25.78 degrees Centigrade the year before.In that year, the minimum temperature was 20.9 °C.

To know more about energy shift visit:

https://brainly.com/question/30601675

#SPJ1

Hydrochloric acid, HCl, is formed when chlorine gas, Cl2, reacts with water. The balanced chemical equation for this reaction is:

Cl2 + H2O → HCl + H2O

A chemical equation is a symbolic representation of a chemical reaction that uses chemical formulas to describe the reactants and products of the reaction. The reactants are written on the left side of the equation and the products are written on the right side. The arrow separating the two sides of the equation indicates the direction of the reaction, with the reactants on the left side and the products on the right side.

The amount of hydrochloric acid formed will be equal to the number of grams of water used in the reaction. Since 22.6 grams of water was used, 22.6 grams of hydrochloric acid will be formed upon the complete reaction of 22.6 grams of water with excess chlorine gas.

To learn more about chemical equation

https://brainly.com/question/29886207

#SPJ1