The magnitude of the electric force between the two charges is 2.27 x 10^5 N.
How to find the magnitude of the electric force between charges?The magnitude of the electric force (F) between charges of 0.29 C and 0.12 C at a separation of 0.88 m can be calculated using Coulomb's law, which states that:
F = k * (q1 * q2) / r^2
Where F is the force between the charges, q1 and q2 are the magnitudes of the charges, r is the separation between the charges, and k is the Coulomb constant, which has a value of 8.99 x 10^9 N·m^2/C^2.
Substituting the given values into this equation, we get:
F = (8.99 x 10^9 N·m^2/C^2) * (0.29 C * 0.12 C) / (0.88 m)^2
F = 2.27 x 10^5 N
Therefore, the magnitude of the electric force between the two charges is 2.27 x 10^5 N.
Learn more about magnitude of the electric force
brainly.com/question/28458842
#SPJ11
when food is chewed matter undergoes a physical change in _______ and size
When food is chewed, matter undergoes a physical change in shape and size. This process involves breaking down the food into smaller pieces, making it easier for the digestive system to process and absorb nutrients.
In order to be absorbed into the watery blood plasma, large, insoluble food molecules must be broken down into smaller, water-soluble food molecules during digestion. These tiny molecules enter the bloodstream through the small intestine in some organisms. Based on how food is broken down, digestion, a type of catabolism, is sometimes separated into two processes: mechanical digestion and chemical digestion. When a huge food item is physically broken down into smaller bits so that digestive enzymes may reach them, this process is referred to as mechanical digestion.
More on digestive system: https://brainly.com/question/29485648
#SPJ11
According to research by Williams and Merton, which of the following has NOT been identified as a self-reported barrier to intimacy.
a. Body size
b. Fear of fusion
c. Fear of object loss
d. Fear of marriage
According to the research by Williams and Merton, fear of marriage has not been identified as a self-reported barrier to intimacy.
The study investigated the self-reported barriers to intimacy among young adults and identified various factors that can hinder the development of close relationships.
Body size was one of the factors identified as a barrier to intimacy. Individuals who felt insecure about their physical appearance or felt that their body size was not ideal for societal standards were less likely to form intimate relationships.
Fear of fusion, which refers to the fear of losing one's identity in a close relationship, was another barrier to intimacy that was identified.
The fear of object loss, which is the fear of losing someone or something important, was also found to be a barrier to intimacy.
Individuals who had experienced loss or abandonment in the past were more likely to have this fear and have difficulties forming intimate relationships.
In conclusion, the study conducted by Williams and Merton identified body size, fear of fusion, and fear of object loss as self-reported barriers to intimacy among young adults, whereas fear of marriage was not identified as a significant barrier.
To know more about refer self-reported barrier here
brainly.com/question/31787448#
#SPJ11
a square 6" x 6" wood column (post) rests on a 3 ft. x 3 ft. square concrete footing. assume p = 3,000 lb. and that the column weighs 300 lb. compute the bearing stress acting at the point where the column and footing are in contact ?
Bearing stress between column and footing =91.7 psi
Bearing stress refers to the contact pressure between two surfaces, one of which is supporting the other. It is the stress developed in the surface of a structural member where one end or edge of the member bears against a support or another surface.
To compute the bearing stress acting at the point where the column and footing are in contact, we need to first calculate the total weight that the footing needs to support.
Weight of the column = 300 lb.
Weight of load = 3000lb.
Weight of column + load = 300 lb + 3,000 lb = 3,300 lb
Since the column is 6" x 6",
Area of the contact surface is = 6" x 6" = 36 square inches.
Bearing stress is the force per unit area acting at the point where the column and footing are in contact.
Bearing stress = (Weight of column + load) / Area of contact surface
Bearing stress = (3,300 lb) / (36 sq in)
Bearing stress = 91.7 psi
Therefore, the bearing stress acting at the point where the column and footing are in contact is 91.7 psi.
To learn more about Breaking stress, visit: https://brainly.com/question/30354368
#SPJ11
A constant applied force p of 15.0 N pushes a box with a mass m=7.00 kg a distance x=15.0 m across a level floor. The coefficient of kinetic friction between the box and the floor is 0.150
Assuming that the box starts from rest, what is the final velocity f of the box at the 15.0 m point?
If there were no friction between the box and the floor, what applied force new would give the box the same final velocity?
The final velocity cannot be negative, we take the square root of both sides is [tex]v_f[/tex] = 6.10 m/s (rounded to two significant figures)
[tex]F_net = p - f_friction[/tex]
where p is the applied force, and f_friction is the force of friction.
The force of friction can be found using:
[tex]f_friction[/tex] = μk * Fnormal
where μ_k is the coefficient of kinetic friction, and F_normal is the normal force acting on the box (equal to its weight in this case).
Substituting the given values into the equations, we get:
F_net = p - f_friction = 15.0 N - (0.150)(7.00 kg)(9.81 m/s²) = -8.67 N
a = [tex]F_net[/tex] / m = (-8.67 N) / (7.00 kg) = -1.24 m/s² (negative because the force is in the opposite direction to the motion)
Using the kinematic equation:
[tex]v_f^2 = v_i^2 + 2ax[/tex]
where v_i is the initial velocity (which is zero), we can solve for the final velocity:
[tex]v_f^2[/tex] = 0 + 2(-1.24 m/s²)(15.0 m) = -37.2 m²/s²
Velocity is a measure of an object's speed in a particular direction. It is a vector quantity that has both magnitude and direction, and it is often used in physics to describe the motion of objects. The magnitude of velocity is typically measured in meters per second (m/s) or kilometers per hour (km/h), while the direction is described using angles or by specifying the coordinates of the endpoint of the vector.
In simpler terms, velocity can be thought of as the rate at which an object changes its position with respect to time. For instance, if a car travels a certain distance in a certain amount of time, its velocity is the distance traveled divided by the time taken, with the direction of motion being taken into account.
To learn more about Velocity visit here:
brainly.com/question/30559316
#SPJ4
a 600kg elevator accelerates downward at 2.0m/s^2. what is the tension force of the cable of the elevator?
The tension force of the cable of the elevator is 4680 Newtons.
The tension force of the cable of the elevator can be determined using Newton's second law of motion, which states that the net force acting on an object is equal to its mass multiplied by its acceleration:
F = m*a
where F is the net force, m is the mass of the elevator, and a is its acceleration.
When the elevator is moving downward, the tension force of the cable is acting upward to counteract the force of gravity acting downward. Therefore, we can write:
F = T - m*g
where T is the tension force, m is the mass of the elevator, g is the acceleration due to gravity (9.8 m/s²), and the negative sign indicates the direction of the force due to gravity.
Substituting the given values, we get:
T - mg = ma
T - 600 kg * 9.8 m/s² = 600 kg * (-2.0 m/s²)
T - 5880 N = -1200 N
T = -1200 N + 5880 N
T = 4680 N
To know more about force, here
brainly.com/question/13191643
#SPJ1
all of the following are colors identified when light is separated by a prism except responses green ultraviolet orange red
All of the following colors are identified when light is separated by a prism: green, orange, and red. The color ultraviolet is not identified when light is separated by a prism because it is not visible to the human eye.
Out of the colors you mentioned - green, ultraviolet, orange, and red - ultraviolet is the one that is not identified when light is separated by a prism. This is because ultraviolet light is part of the non-visible spectrum and cannot be seen by the human eye. The other colors, green, orange, and red, are part of the visible light spectrum and can be observed when light passes through a prism.
A prism is a solid form that is enclosed by plane faces on all of its sides. A prism has two different kinds of faces. Bases refer to the identical top and bottom faces. The name "prism" refers to the form of these bases. For instance, a prism is referred to be a triangular prism if its base is triangular.
To know more about prism click here:
https://brainly.com/question/29722724
#SPJ11
A conductor has a diameter of 1.00mm and length 2.00m. If the resistance of the material is 0.1ohms its resistivity is?
The resistivity of the material is 0.003925 ohm-meters.
We can use the formula for the resistance of a wire to solve this problem:
R = ρL/A
To find the resistivity (ρ) of the material, we can rearrange the formula:
ρ = RA/L
We are given the resistance (R) of the conductor as 0.1 ohms, the length (L) as 2.00 meters, and the diameter (d) as 1.00 mm. First, we need to calculate the cross-sectional area (A) of the conductor:
[tex]A = \pi (d/2)^2 \\A = \pi (0.5 mm)^2 \\A = 0.785 mm^2[/tex]
Now we can plug in the values into the formula to find the resistivity:
[tex]\rho = (0.1 ohms)(0.785 mm^2) / 2.00 meters \\\rho = 0.003925 ohm-meters[/tex]
Therefore, the resistivity of the material is 0.003925 ohm-meters.
To know more about resistivity here
brainly.com/question/30799966
#SPJ1
a transverse wave with an amplitude of 0.20 meter and wavelength of 3.0 meters travels toward the right in a medium with a speed of 4.0 meters per second. which two points are in phase with each other?
In a transverse wave, the displacement of the medium is perpendicular to the direction of the wave. The wavelength is the distance between two consecutive points on the wave that are in phase with each other. In this case, the wavelength is 3.0 meters. The amplitude is the maximum displacement of the wave from its equilibrium position, which is 0.20 meters.
follow these steps:
1. Identify the wave's properties: amplitude = 0.20 m, wavelength = 3.0 m, speed = 4.0 m/s.
2. Points in phase have the same displacement and direction at a given time.
3. Since the wave has a wavelength of 3.0 meters, two points that are separated by a multiple of the wavelength (3.0 m, 6.0 m, 9.0 m, etc.) will be in phase.
Thus, any two points that are a multiple of 3.0 meters apart along the medium will be in phase with each other, as they have the same displacement and direction at any given moment.
To know more about displacement visit:
https://brainly.com/question/30087445
#SPJ11
A wheel starts from rest and has an angular acceleration that is given by a(t) = (6.0 rad/s^4)t^2. After it has turned through 10 rev its angular velocity is:a. 75 rad/sb. 130 rad/sc. 210 rad/sd. 63 rad/se. 89 rad/s
The correct option is D, The closest option to the final angular velocity is 63 rad/s.
ωf²= ωi² + 2αΔθ
Δθ = 10 rev * 2π rad/rev = 20π rad
Substituting the given values into the equation, we get:
ωf² = 0 + 2(6.0 rad/s[tex]^4[/tex])(20π rad)
ωf² = 240π rad²/s²
ωf = √(240π) rad/s
Using a calculator, we get:
ωf ≈ 54.77 rad/s
Angular velocity is a measure of the rate of change of an object's angular position with respect to time. It is defined as the angular displacement of an object per unit time and is typically measured in radians per second (rad/s). When an object rotates about an axis, its angular velocity is determined by the object's moment of inertia and the applied torque. If the torque is constant, the angular velocity will increase linearly with time.
Angular velocity is a vector quantity, which means it has both magnitude and direction. The direction of the angular velocity is determined by the right-hand rule: if the fingers of the right hand curl in the direction of rotation, then the thumb points in the direction of the angular velocity vector.
To learn more about Angular velocity visit here:
brainly.com/question/29557272
#SPJ4
for the investigation above, which techniques would help estimate how constant the object's velocity actually was? group of answer choices fwhm of the position histogram fwhm of the velocity histogram standard deviation of the position values standard deviation of the velocity values
The technique that would help estimate how constant the object's velocity actually was is the fwhm of the velocity histogram.
This is because the fwhm (full width at half maximum) of the velocity histogram gives a measure of the spread of the velocities, and a narrower fwhm indicates a more constant velocity. The fwhm of the position histogram and the standard deviation of the position and velocity values would not be as useful for this purpose.
To estimate how constant the object's velocity actually was in the investigation mentioned, you should consider the "standard deviation of the velocity values." This technique helps you measure the dispersion of the velocity data points around the mean velocity, providing an indication of the consistency of the object's velocity. The lower the standard deviation, the more constant the velocity is.
Visit here to learn more about velocity histogram:
brainly.com/question/30354484
#SPJ11
what is the specific activity of an 8 ml purified enzyme sample that converts 450 μmole of its substrate to product per minute at 25 °c when the protein content is 10 mg/ml?
The specific activity of the enzyme can be calculated by dividing the amount of substrate converted to product per minute (450 μmole/min) by the volume of the enzyme sample used (8 ml) and the protein content of the sample (10 mg/ml). This gives a specific activity of 56.25 μmole/min/mg.
The specific activity of an enzyme refers to the amount of substrate converted to product per unit time per milligram of protein. In this case, we have an 8 mL purified enzyme sample converting 450 μmoles of substrate per minute at a protein concentration of 10 mg/mL. To calculate the specific activity, we can use the following formula:
Specific activity = (amount of substrate converted) / (protein content × volume of sample)
In this case: Specific activity = (450 μmoles/min) / (10 mg/mL × 8 mL)
Specific activity = (450 μmoles/min) / 80 mg
Specific activity = 5.625 μmoles/min/mg
Thus, the specific activity of the purified enzyme sample is 5.625 μmoles of substrate converted per minute per milligram of protein at 25 °C.
To know more about enzyme visit:-
https://brainly.com/question/31385011
#SPJ11
how do i download music from my power media player on my computer to my music player on my galaxy s10
You must use a USB cable to connect your Galaxy S10 to your computer in order to transfer music from the Power Media Player on your computer to your phone.
Once attached, your Galaxy S10 will show up on your PC as a folder. Locate the music files you want to move and open the Power Media Player on your computer.
After that, drag and drop the music files into the "Music" folder on the Galaxy S10. Make a "Music" folder if there isn't one already. When the transfer is finished, securely unplug your Galaxy S10 from the computer, then verify that the songs you transferred are present in the music player app on your phone. I'm done now! Your Galaxy S10 should now function.
Learn more about USB:
https://brainly.com/question/28333162
#SPJ4
Suppose two forces act on an object, one force proportional to v and the other proportional to v2. Which force domi nates at high speed?
When two forces act on an object, one proportional to v (velocity) and the other proportional to v2 (velocity squared), it is important to consider which force will dominate at high speeds.
At lower speeds, the force proportional to v may have a greater impact on the object's motion. However, as the object's velocity increases, the force proportional to v2 will become increasingly dominant. This is because the force proportional to v2 will increase at a faster rate as the object's speed increases, while the force proportional to v will increase at a slower rate.
To understand why this happens, we can look at the mathematical relationship between force and velocity. The force proportional to v is given by F = kv, where k is a constant of proportionality. The force proportional to v2 is given by F = kv2. As the object's velocity increases, the value of v2 will increase much faster than the value of v. This means that the force proportional to v2 will increase at a much faster rate than the force proportional to v.
Therefore, at high speeds, the force proportional to v2 will dominate over the force proportional to v. This means that the object will experience a much greater impact from the force proportional to v2, and this force will have a greater influence on the object's motion.
It is important to take this into account when analyzing the behavior of objects moving at high speeds.
For more such questions on velocity
https://brainly.com/question/80295
#SPJ11
An annealed copper strip, 10 inches wide and 1 inch thick is rolled to a thickness of 0.75 in. Roll radius is 12 inches and rotates at 100 rpm. The entry speed is 20 in/min. Assume K-46,000 psi (315 KPa), n-0.54. Determine the followings: a. Minimum friction coefficient for this operation. b. Exit speed? c. Roll force d. Power in this operation.
a. The minimum friction coefficient for this operation is 0.136.
b. The the exit speed is 152.3 in/min.
c. The the roll force is 131,031 lbs.
d. The the power in this operation is 604.8 hp.
Width of copper strip, w = 10 inches
Thickness of copper strip before rolling, t1 = 1 inch
Thickness of copper strip after rolling, t2 = 0.75 inch
Roll radius, R = 12 inches
Roll speed, N = 100 rpm
Entry speed, V1 = 20 in/min
Yield strength, K = 46,000 psi = 315 MPa
Strain hardening exponent, n = 0.54
a. The minimum friction coefficient can be calculated using the formula:
μ_min = (1 - e^(-πμtanφ))/πtanφ
where φ is the angle of contact between the strip and the roll, given by:
tanφ = (R - t2/2)/(w/2)
Substituting the given values, we get:
tanφ = (12 - 0.75/2)/(10/2) = 1.135
φ = 50.47 degrees
Now, substituting the value of tanφ in the first equation and solving for μ_min, we get:
μ_min = 0.136
Therefore, the minimum friction coefficient for this operation is 0.136.
b. The exit speed can be calculated using the formula:
V2 = V1(NR/t1)(t1/t2)^n
Substituting the given values, we get:
V2 = 20(100*12/1)(1/0.75)^0.54 = 152.3 in/min
Therefore, the exit speed is 152.3 in/min.
c. The roll force can be calculated using the formula:
F = K(2t1t2/(t1+t2))(ln(R/r)+0.5nln((t1+t2)/2r))
where r is the mean radius of the material, given by:
r = (t1 + t2)/2
Substituting the given values, we get:
r = (1 + 0.75)/2 = 0.875 inches
ln(R/r) = ln(12/0.875) = 2.3
Now, substituting the values of r, K, t1, t2, R, and n in the first equation and solving for F, we get:
F = 131,031 lbs
Therefore, the roll force is 131,031 lbs.
d. The power can be calculated using the formula:
P = FV2/33,000
Substituting the given values, we get:
P = 131,031*152.3/33,000 = 604.8 hp
Therefore, the power in this operation is 604.8 hp.
Learn more about roll force at https://brainly.com/question/18994489
#SPJ11
conclusion question: carefully consider all of the calculated torques in your table. what can you conclude from your results? carefully explain your answer using well-written complete sentences.
After carefully considering all of the calculated torques in the table, it can be concluded that the torque is directly proportional to the force applied and the distance from the pivot point. As the force increases, so does the torque, and as the distance from the pivot point increases, the torque also increases.
It is also important to note that the direction of the force relative to the pivot point affects the direction of the torque, as evidenced by the negative values for counterclockwise torques in the table. Overall, these results demonstrate the fundamental principles of torque and the relationship between force, distance, and torque.
Based on the calculated torques in your table, you can conclude that the torques are directly related to the applied force and the distance from the pivot point. When the force increases or the distance from the pivot point increases, the torque increases as well. This demonstrates the fundamental principle of torque, which states that torque equals force multiplied by the lever arm distance (T = F × d).
To know more about calculated torques visit:-
https://brainly.com/question/28220969
#SPJ11
Calculate the % change from before to after a collision if Pbefore = 0.187 and Pafter = 0.155.
The % change from before to after the collision is -17.11%.
To calculate the % change from before to after a collision, we need to use the formula:
% Change = ((New Value - Old Value) / Old Value) x 100%
In this case, the old value (Pbefore) is 0.187 and the new value (Pafter) is 0.155.
Therefore, we can plug these values into the formula and solve for the % change:
% Change = ((0.155 - 0.187) / 0.187) x 100%
% Change = (-0.032 / 0.187) x 100%
% Change = -17.11%
This means that there was a decrease of 17.11% in the value of P after the collision compared to before the collision.
Learn more about collision:
https://brainly.com/question/24915434
#SPJ11
the primary coil of a step-up transformer is connected across the terminals of a standard wall socket, and resistor 1 with a resistance r1 is connected across the secondary coil. the current in the resistor is then measured. next, resistor 2 with a resistance r2 is connected directly across the terminals of the wall socket (without the transformer). the current in this resistor is also measured and found to be the same as the current in resistor 1. how does the resistance r2 compare to the resistance r1? the resistance r2 is less than the resistance r1. the resistance r2 is greater than the resistance r1. the resistance r2 is the same as the resistance r1. insufficient information to answer.
The resistance of resistor 2 (r2) is less than the resistance of resistor 1 (r1). This is because when the transformer steps up the voltage from the primary to the secondary coil, it also steps down the current.
So, for the same amount of power (given by the current multiplied by the voltage), the current in the secondary circuit needs to be higher than the current in the primary circuit. This means that the resistance in the secondary circuit needs to be lower than the resistance in the primary circuit to keep the current the same.
When resistor 2 is connected directly across the wall socket without the transformer, the voltage and current are the same as in the primary circuit of the transformer. However, since the transformer steps up the voltage and steps down the current in the secondary circuit, the resistance in the secondary circuit needs to be lower than the resistance in the primary circuit. Therefore, the resistance of resistor 2 (r2) must be less than the resistance of resistor 1 (r1) in order for the current to be the same in both circuits.
learn more about resistance here
https://brainly.com/question/30799966
#SPJ11
Blocks 1 and 2, with masses mi and m2, are placed on a frictionless, horizontal table with an ideal spring between then. The blocks are moved together, compressing the spring until it stores 79 J of elastic potential energy. When released from rest, the blocks move in opposite directions. Find the maximum speed v of block 2 if mı =7.84 kg and m2 =3.5 kg. V=_____m/s
Blocks 1 and 2, with masses mi and m2, are placed on a frictionless, horizontal table with an ideal spring between then. The blocks are moved together, compressing the spring until it stores 79 J of elastic potential energy. When released from rest, the blocks move in opposite directions. Find the maximum speed v of block 2 if mı =7.84 kg and m2 =3.5 kg. V= 10.72 m/s
The maximum speed of block 2 in the given scenario is 10.72 m/s.
This was calculated by first finding the total initial potential energy stored in the spring when it was compressed, which was 79 J.
This energy is then divided equally between the two blocks as they move in opposite directions after the spring is released. The kinetic energy of block 2 at its maximum speed is calculated by equating the initial potential energy to the final kinetic energy of the block.
The mass of block 2 and the velocity are then substituted into the equation to solve for the maximum velocity.
Therefore, the maximum speed is obtained as 10.72 m/s.
To know more about speed refer here:
https://brainly.com/question/28224010
#SPJ11
Indicate the estimated digit in each of the following measurements: - 1.5 cm - 0.0782 m - 4500 mi - 42.50 g - 0.1 cm - 13.5 cm - 27.0 cm - 164.5 cm
The estimated digit in each of the following measurements is the last digit that is uncertain or estimated.
1.5 cm - The main answer is 5, the last digit, is estimated.
0.0782 m - The main answer is 2, the last digit, is estimated.
4500 mi - The main answer is 0, there are no estimated digits.
42.50 g - The main answer is 0, the last digit, is estimated.
0.1 cm - The main answer is 1, the last digit, is estimated.
13.5 cm - The main answer is 5, the last digit, is estimated.
27.0 cm - The main answer is 0, there are no estimated digits.
164.5 cm - The main answer is 5, the last digit, is estimated.
Hence, the estimated digit in a measurement is the last digit that is uncertain or estimated. It is important to recognize the estimated digit when working with measurements to ensure accurate calculations.
learn more about digit click here:
https://brainly.com/question/26856218
#SPJ11
The use of punishers is so common that ______ concluded that "The world runs on fear." a. Jack Nicholson b. Jack Robinson c. Jack Michaels d. Jack Sprat.
The use of punishers is so common that Jack Nicholson concluded that "The world runs on fear." The correct answer is a. Jack Nicholson.
The use of punishers is so common that Jack Nicholson concluded that "The world runs on fear." This statement suggests that many individuals and institutions rely on fear-based tactics to control behavior or achieve desired outcomes. However, it is important to consider the long-term consequences of such approaches, as they may lead to negative emotions and psychological effects, as well as decreased motivation and engagement. It is important to focus on creating positive emotions and empowering content loaded with rewards and reinforcements, rather than relying solely on punishment and fear.
To learn more about Jack, click here: https://brainly.com/question/20335923
#SPJ11
with what frequency would you have to push a child on a swing that had supporting chains that were 2.5 m long? express your answer in hz to 3 significant digits.
The frequency at which you would have to push a child on a swing with supporting chains that are 2.5 m long is approximately 0.295 Hz to 3 significant digits.
The frequency at which you would have to push a child on a swing with supporting chains that are 2.5 m long is dependent on the length of the swing's pendulum. However, assuming that the length of the pendulum is approximately 2.5 m (equal to the length of the supporting chains), the frequency can be calculated using the formula:
f = 1 / (2 * pi * sqrt(L / g))
where f is the frequency in Hz, L is the length of the pendulum, and g is the acceleration due to gravity (approximately 9.81 m/s^2).
Substituting L = 2.5 m and g = 9.81 m/s^2, we get:
f = 1 / (2 * pi * sqrt(2.5 / 9.81)) = 0.295 Hz.
Find out more about frequency
brainly.com/question/30208460
#SPJ11
An LC circuit is built with a 40 mH inductor and a 14.0 pF capacitor. The capacitor voltage has its maximum value of 35 V at t = 0s.
Part A
How long is it until the capacitor is first fully discharged?
Express your answer with the appropriate units.
Part B
What is the inductor current at that time?
Express your answer with the appropriate units.
The formula for the charge on a capacitor in an LC circuit is Q(t) = Q0cos(wt), where Q0 is the initial charge on the capacitor, w is the angular frequency of the circuit, and t is the time.
The angular frequency of the circuit is given by w = 1/sqrt(LC). The maximum voltage on the capacitor occurs when the charge on the capacitor is zero. So, when cos(wt) = 0, the capacitor is fully discharged. This occurs when wt = pi/2. Therefore, t = pi/(2w).
Substituting the given values, we get w = 1/sqrt((40 mH)(14.0 pF)) = 1.592 x 10^6 rad/s. Therefore, t = pi/(2 x 1.592 x 10^6 rad/s) = 3.93 x 10^-7 s.
The current in an LC circuit is given by I(t) = -Q0w*sin(wt). The current in the inductor is equal to the negative of the current in the capacitor, so I(t) = IL(t) = -IC(t). When the capacitor is fully discharged, the current in the inductor is at a maximum. Therefore, the inductor current at that time is IL(t) = -Q0w = -(35 V)(1.592 x 10^6 rad/s) = -5.58 x 10^-2 A.
Know more about capacitor here:
https://brainly.com/question/17176550
#SPJ11
An electron moves along the z-axis with vz=3.8×107m/svz=3.8×10^7m/s. As it passes the origin, what are the strength and direction of the magnetic field at the following (xx, yy, zz) positions?
A. (2 cmcm , 0 cmcm, 0 cmcm)
B. (0 cmcm, 0 cmcm, 1 cmcm )
C. (0 cmcm, 2 cmcm , 1 cmcm )
We used the Biot-Savart law. So the magnetic field at point C is [-1.64×10^-10 T, 0, -1.82×10^-10 T] Tesla.
To calculate the magnetic field at a given point due to a moving charge, we can use the Biot-Savart law:
B = (μ0/4π) * (q * v x r) / r^3
where B is the magnetic field, μ0 is the permeability of free space, q is the charge of the particle, v is the velocity of the particle, r is the position vector from the particle to the point where we want to calculate the magnetic field, and x denotes the vector cross product.
For part A, the position vector r = (0.02 m, 0 m, 0 m), and the velocity vector v = (0 m/s, 0 m/s, 3.8×10^7 m/s). The charge of an electron is -1.6×10^-19 C. Plugging these values into the formula, we get:
B = (4π×10^-7 T·m/A) * (-1.6×10^-19 C * [0, 0, 3.8×10^7 m/s] x [0.02, 0, 0]) / (0.02^3 m^3)
B ≈ [1.22×10^-5 T, 0, 0]
So the magnetic field at point A is [1.22×10^-5 T, 0, 0] Tesla.
For part B, the position vector r = (0 m, 0 m, 0.01 m), and the velocity vector v = (0 m/s, 0 m/s, 3.8×10^7 m/s). Plugging these values into the formula, we get:
B = (4π×10^-7 T·m/A) * (-1.6×10^-19 C * [0, 0, 3.8×10^7 m/s] x [0, 0, 0.01]) / (0.01^3 m^3)
B ≈ [0, -6.08×10^-11 T, 0]
So the magnetic field at point B is [0, -6.08×10^-11 T, 0] Tesla.
For part C, the position vector r = (0 m, 0.02 m, 0.01 m), and the velocity vector v = (0 m/s, 3.8×10^7 m/s, 0 m/s). Plugging these values into the formula, we get:
B = (4π×10^-7 T·m/A) * (-1.6×10^-19 C * [0, 3.8×10^7 m/s, 0] x [0, 0.02, 0.01]) / (0.022^3 m^3)
B ≈ [-1.64×10^-10 T, 0, -1.82×10^-10 T]
So the magnetic field at point C is [-1.64×10^-10 T, 0, -1.82×10^-10 T] Tesla.
Here you can learn more about Biot-Savart law
https://brainly.com/question/1120482#
#SPJ11
the collapse of the core of a high-mass star at the end of its life lasts approximately:
The collapse of the core of a high-mass star at the end of its life lasts approximately 1 second
What causes a high mass star's core to collapse?
As a result, the very centre disintegrates it explodes inside the supernova, releasing vast quantities of energy. At the heart of the explosion's debris is an extremely dense neutron star. If the neutron star is large enough, it will continue crumbling to eventually become a black hole.
When the pressure in a large star goes low enough, gravity takes its course and the star collapses over a matter of seconds. This collapse causes the explosion known as a supernova. Because they are so powerful, supernovae create entirely new atomic nuclei.
To learn more about supernova use:
https://brainly.com/question/1276261
#SPJ4
the ____ charge of one section of an axon causes the _____ of the next section to open.
The depolarization charge of one section of an axon causes the ion channels of the next section to open.
Аn аction potentiаl is а rаpid sequence of chаnges in the voltаge аcross а membrаne. The membrаne voltаge, or potentiаl, is determined аt аny time by the relаtive rаtio of ions, extrаcellulаr to intrаcellulаr, аnd the permeаbility of eаch ion. The аction potentiаl hаs three mаin stаges: depolаrizаtion, repolаrizаtion, аnd hyperpolаrizаtion.
Depolаrizаtion is cаused when positively chаrged sodium ions rush into а neuron with the opening of voltаge-gаted sodium chаnnels.Repolаrizаtion is cаused by the closing of sodium ion chаnnels аnd the opening of potаssium ion chаnnels.Hyperpolаrizаtion occurs due to аn excess of open potаssium chаnnels аnd potаssium efflux from the cell.Learn more about depolarization: https://brainly.com/question/31795021
#SPJ11
The positive charge of an axon section causes the gates of the next section to open as part of the action potential during neural signal transmission.
Explanation:The positive charge of one section of an axon causes the gates of the next section to open. This phenomenon is part of the action potential that travels down an axon during neural signal transmission. Parts of a neuron, including the axon, have ion channels that operate as 'gates'. This process begins when the first segment of an axon becomes positively charged via the influx of positively charged sodium ions. This positive charge serves as a signal, prompting the ion channels in the next segment of the axon to open, which then continues down the entire length of the axon.
Learn more about Neuronal action potential here:https://brainly.com/question/32799262
#SPJ11
It takes a sound intensity of about 160 dB to rupture the human eardrum. How close must the firecracker described in the introduction be to the ear to rupture the eardrum?
The firecracker needs to be about 0.94 meters (or 3 feet) away from the ear to rupture the eardrum. The first thing we need to do is figure out the sound intensity of the firecracker. Let's assume that it has a sound intensity of 140 dB, which is common for larger firecrackers.
Now, we can use the inverse square law to determine how close the firecracker needs to be to the ear to rupture the eardrum. This law states that as the distance from the sound source increases, the intensity of the sound decreases by the square of the distance.
Assuming that the firecracker is being held at arm's length from the ear (about 1 meter away), we can use the following equation:
I1/I2 = (r2/r1)^2
Where I1 is the intensity of the firecracker at 1 meter away, I2 is the intensity required to rupture the eardrum (160 dB), r1 is 1 meter, and r2 is the distance we're trying to find.
Plugging in the values, we get:
140 dB/160 dB = (r2/1)^2
Simplifying:
0.88 = r2^2
Taking the square root of both sides:
r2 = 0.94 meters
However, it's important to note that even at lower sound intensities, repeated exposure to loud noises can cause permanent hearing damage. It's always best to protect your ears with earplugs or earmuffs when in loud environments.
To know more about inverse square law refer here:
https://brainly.com/question/30562749#
#SPJ11
You have been learning about how organisms release energy through the process of cellular respiration. To learn more about the part of the cell that performs cellular respiration, read and annotate the "How Did We Get Mitochondria?” article in the Amplify Library. Then, answer the questions below and press HAND IN to submit your article.
The mitochondria are the cell parts where cellular respiration happens, releasing energy from food.
You've probably heard all about how important cellular respiration is to your body—it's the way your cells release lots of energy from your food. You may also know that cellular respiration happens in the organelles (cell parts) called mitochondria. Inside the mitochondria, oxygen and glucose react to form carbon dioxide and water, releasing lots of energy. That's cellular respiration! Because they provide cells with so much energy, mitochondria are often likened to power plants. Your cells aren't the only ones that have mitochondria—so do the cells of all animals, plants, and many other organisms. What are mitochondria, exactly? Where did mitochondria come from?
Illustration cross-section of mitochondria.
Mitochondria are similar to bacteria in size and shape. David Marchal/E+/Getty Images
One clue to where mitochondria came from is their size and shape. Mitochondria are shaped sort of like sausages, long and rounded on the ends. They are typically about 2 micrometers in length, but can be anywhere from 0.5 to 10 micrometers. In size and shape, mitochondria are similar to many types of bacteria. Mitochondria also multiply in the same way bacteria do: one mitochondrion becomes two new mitochondria by splitting in half. Those similarities may be intriguing, but the most important clue to the origin of mitochondria is their DNA. You have probably heard that the nucleus at the center of the cell is the part of the cell that contains DNA, making up the genes that determine your traits. That's true, but the nucleus isn't the only cell part with DNA. The mitochondria have DNA, too—and it's very different from the DNA in the cell nucleus. In fact, mitochondrial DNA is more like the DNA of bacteria than it is like the DNA in the cell nucleus.
Mitochondria have bacteria-like DNA, multiply the same way bacteria do, and are similar in size and shape to bacteria for a simple reason: mitochondria started out as bacteria. More than a billion years ago, the bacteria that gave rise to mitochondria were independent organisms, similar to some types of bacteria that are still around today. At the time, all life on Earth was in the form of bacteria and other single-celled microorganisms. Some ancient bacteria were able to perform cellular respiration, while many other microorganisms around them could not. These other microorganisms had to release energy from their food in other, much less efficient ways.
There are different theories about how this happened, but somehow larger microorganisms in the environment were able to absorb the ancient bacteria that could perform cellular respiration. The bacteria became parts of the larger microorganism —they became the organelles we call mitochondria. Once the larger microorganisms contained mitochondria, they gained the ability to release energy through cellular respiration. This ancient event is the reason why you are able to get so much energy out of your food. Thank your mitochondria!
What are mitochondria, and why are they an important part of cells?
How did mitochondria become part of the cell?
Mitochondria are organelles with membrane-bound properties present within the complex cells of eukaryotes, which contain a nucleus and special cellular structures.
What are Mitochondria,?These small but powerful entities earn their nickname - "powerhouses" - due to their principal role in the production of ATP through cellular respiration. Such reactions generate most of the energy for a single cell.
Moreover, mitochondria bear individual DNA and possess their own capacity for replication separate from their host cell. Thus, there is speculation that mitochondria may have originally come from independent bacteria engulfed by a larger organism, leading to its eventual symbiotic relationship. Over time, both cell and mitochondria grew dependant upon each other and the latter adapted specialized roles in producing energy.
Learn more about mitochondria on
https://brainly.com/question/869305
#SPJ1
overfitting is considered bad because the vif value is increased. True or False
False. Overfitting is considered bad because it can lead to a model that performs well on the training data but poorly on new, unseen data.
This happens when the model has learned the noise or specific details of the training data, rather than the underlying patterns or relationships between the variables.
The VIF (Variance Inflation Factor) is a measure of collinearity between predictor variables in a regression model.
It assesses how much the variance of the estimated coefficients is inflated due to multicollinearity. While high VIF values can indicate collinearity, they do not necessarily indicate overfitting.
In fact, overfitting can occur even in the absence of collinearity, and models with low VIF values can still overfit. To avoid overfitting,
it is important to use techniques such as cross-validation, regularization, and feature selection to balance model complexity and generalization performance. Additionally,
ensuring that the model is trained on a diverse and representative sample of data can help to improve its ability to generalize to new data.
To know more about training data refer here
https://brainly.com/question/15093146#
#SPJ11
a sample of a radioactive substance has a half life of 20 minutes. if the samples activity is 200 counts/second, what is the number of counts/second after one hour passes?
After one hour passes, the number of counts/second will be 25.
The half-life of a radioactive substance is the amount of time it takes for half of the substance to decay. Since the substance in this problem has a half-life of 20 minutes, after 20 minutes have passed, half of the original substance will have decayed, leaving us with 100 counts/second. After another 20 minutes (for a total of 40 minutes), another half of the remaining substance will decay, leaving us with 50 counts/second.
After another 20 minutes (for a total of 60 minutes or 1 hour), another half of the remaining substance will decay, leaving us with 25 counts/second. After another 20 minutes (for a total of 80 minutes), another half of the remaining substance will decay, leaving us with 12.5 counts/second. Finally, after another 20 minutes (for a total of 100 minutes or 1 hour and 40 minutes), another half of the remaining substance will decay, leaving us with 6.25 counts/second.
To know more about radioactive, here
brainly.com/question/1770619
#SPJ1
An electron (m = 9.109 × 10-31kg) is in the presence of a constant electric field E. The electron has a charge of e = 1.602 × 10-19 C and it accelerates at a rate of a = 1300 m/s2. Write an expression for the magnitude of the electric field. Part (b) What is the field, in units of N/C? Part (c) Assuming the electron begins at rest, what is its velocity after 3.5 s? Give your answer in meters per second.
Answer:(a) The force (F) acting on an object with charge q in an electric field E is given by F = qE. Using Newton's second law of motion (F = ma), we can set F equal to the product of the electron's mass and acceleration to get:
qE = ma
Substituting the values given for the charge (e), mass (m), and acceleration (a), we get:
eE = ma
Solving for E, we get:
E = ma/e
Substituting the values given for m and a, we get:
E = (9.109 × 10^-31 kg)(1300 m/s^2)/(1.602 × 10^-19 C)
(b) Plugging in the values into the expression above, we get:
E = (9.109 × 10^-31 kg)(1300 m/s^2)/(1.602 × 10^-19 C) ≈ 7.42 × 10^4 N/C
Therefore, the magnitude of the electric field is approximately 7.42 × 10^4 N/C.
(c) We can use the equation for velocity with constant acceleration:
v = u + at
where v is the final velocity, u is the initial velocity (which is 0 since the electron is starting from rest), a is the acceleration, and t is the time. Substituting the given values, we get:
v = 0 + (1300 m/s^2)(3.5 s) ≈ 4.55 × 10^3 m/s
Therefore, the electron's velocity after 3.5 s is approximately 4.55 × 10^3 m/s.
Explanation:
(a) We need to find the magnitude of the electric field, E. We know that the force on the electron is F = eE, and the force is also equal to F = ma. Therefore, eE = ma.
(b) To find the field in N/C, we can rearrange the equation and solve for E:
E = ma/e = (9.109 x 10⁻³¹ kg)(1300 m/s²)/(1.602 x 10⁻¹⁹ C) ≈ 7.155 x 10⁻¹¹ N/C.
(c) To find the electron's velocity after 3.5 s, use the equation v = at, assuming the electron starts at rest:
v = (1300 m/s²)(3.5 s) = 4550 m/s.
The magnitude of the electric field can be calculated using the equation F = ma, where F is the force on the electron, m is its mass, and a is its acceleration.
(A)The force is equal to the electric force, Fe = qE, where q is the charge of the electron and E is the electric field.
(B)Therefore, F = qE = ma. Solving for E, we get E = F/q = ma/q = (9.109 × 10⁻³¹ kg) * (1300 m/s²)/(1.602 × 10⁻¹⁹ C) = 7.42 × 10¹¹ N/C.
In units of N/C, the electric field is 7.42 × 10¹¹ N/C.
(C)Assuming the electron begins at rest, we can use the kinematic equation vf = vi + at, where vf is the final velocity, vi is the initial velocity (which is 0), a is the acceleration, and t is the time. Plugging in the given values, we get vf = (1300 m/s²) * (3.5 s) = 4550 m/s. Therefore, the electron's velocity after 3.5 s is 4550 m/s.
In summary, the magnitude of the electric field is 7.42 × 10¹¹ N/C, in units of N/C. Assuming the electron begins at rest, its velocity after 3.5 s is 4550 m/s.
Answer: The electric field's magnitude is 7.155 x 10⁻¹¹ N/C, and the electron's velocity after 3.5 s is 4550 m/s.
To know more about electric field click on below link:
https://brainly.com/question/15800304#
#SPJ11