Answer:
the answer is B. the energy required to go from a solid to liquid
B. The latent heat of fusion is the energy required to go from a solid to a liquid. It is the amount of heat energy that must be added to a substance at its melting point to convert it from a solid to a liquid, without changing its temperature.
What is latent heat?Latent heat is the amount of heat energy required to change the phase of a substance without changing its temperature.
Option A describes the energy required to break molecular bonds, which is called the bond dissociation energy.
Option C describes the energy required to go from a solid to a gas, which is called the latent heat of sublimation.
Option D describes the energy required to go from a liquid to a gas, which is called the latent heat of vaporization.
Learn more about latent heat at:
https://brainly.com/question/28044951
#SPJ7
Does reactivity increase or decrease from left to right among elements in a period?
Period. As you move from either the left to the right, reactivity rises. Group reactivity diminishes from top to bottom.
As you move from left toward right across a period, responsiveness declines. Higher reactivity is caused by the ease with which electrons can be given or snatched away as you move further to the left as well as along the periodic chart.
This is because the size of both the atomic radius expands as the quantity of electronic energy does. reducing the attractiveness of other elements' valence electrons lowers reactivity.
It happens because there are more valence shells and less interaction among valence pairs of electrons. Consequently, the propensity to take electrons from some of the other atoms declines. Atoms get more electronegative as they move through a period.
To know more about reactivity
https://brainly.com/question/29819445
#SPJ4
PLEASE HELP
What is the difference between a soap an detergent?
1. Soaps have long hydrocarbon chains and detergents have long nitrogen chains,
2. Detergents contain carboxylic acid groups and soaps contain phosphoric acid groups.
3. Detergents have long hydrocarbon chains and soaps have long nitrogen chains.
4. Soaps contain salts and detergents contain sulfonic or phosphoric acid groups.
2 points of the water molecule are the paired ______ and _______ electrons from the oxygen atom and ________ electron from each H atom
The other 2 points of the water molecule are the paired _________ electrons of the oxygen atom.
I get what the question is asking and I know general idea of the answer. I just can't for the life of me figure out what exact wording I am supposed to use that will fit these blanks
To solve this we must be knowing each and every concept related to chemical Compound. Therefore, The other 2 points of the water molecule are the paired two electrons from the oxygen atom and one electron from each H atom.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. The other 2 points of the water molecule are the paired two electrons from the oxygen atom and one electron from each H atom.
Therefore, The other 2 points of the water molecule are the paired two electrons from the oxygen atom and one electron from each H atom.
To learn more about chemical compound, here:
brainly.com/question/26487468
#SPJ1
SEP Compare Data Look at the data in Figure 2. Which is the most
electronegative
atom? Which is the least?
The most electronegative atom is Flourine and the least is Hydrogen
How is fluorine the one with most electronegative atom?The attached image indicates how the highly electronegative Fluorine atom takes away most of the electron density (red-to-blue colored cloud) from a hydrogen–fluoride covalent bond.
An electronegative atom is an atom that has a tendency to attract electrons towards itself when it is part of a chemical bond. The most common example is the oxygen atom. The ability of an atom to attract electrons is known as its electronegativity.
The higher the electronegativity of an atom, the more it will pull electrons towards itself. The electronegativity of an atom is determined by its atomic number and the number of electrons in its outermost shell.
Therefore, the correct answer is as given above
learn more about electronegative atom: https://brainly.com/question/24977425
#SPJ1
Give three examples of fuels and briefly describe what they are used for in daily life
Examples: natural gas, coal, petroleum
Uses: Fuels are dense repositories of energy that are consumed to provide energy services such as heating, transportation and electrical generation. Even though most fuels ultimately get their energy from the sun (see energy conservation) they are usually considered to be a primary energy source.
mark me brainliestt :))
Prior to Thomson's discovery, the atom was thought to be indivisible. Explain the significance of Thomson's concept of the electron.
In 1897, J.J. Thomson's discovery of the electron was revolutionary.
What is thomson's concept?Thomson's concept of the electron showed that the atom was not indivisible, but instead was composed of smaller particles. This discovery provided the first piece of evidence to support the atomic theory, which states that all matter is made up of atoms.
Thomson's concept of the electron also allowed scientists to understand the behaviour of electricity better. Electrons are negatively charged particles, and Thomson's discovery showed that electricity is a flow of electrons. This knowledge allowed scientists to create new technologies based on the understanding of electrons, such as computers and cell phones.
The significance of Thomson's concept of the electron can be summed up in three words: evidence, electricity, and technology. Thomson's discovery provided the first piece of evidence for the atomic theory, allowed for a better understanding of electricity, and paved the way for the creation of many new technologies.
To know more about thomson's concept click-https://brainly.com/question/1569426
#SPJ4
List some Industrial plants and indicate the gaseous pollutants they emit
Answer:
Sources of air pollutants from the industry include: power generation plant, boilers, bleaching plants and caustic soda/chlorine plant. Pollutants include particulate matter, chlorine, sulfur dioxides, hydrogen sulfides, carbon dioxide, carbon monoxides and nitrous oxides.
Which of the following could account for the weakening of hurricanes when they reach the Atlantic Ocean? Ocean waters in the Atlantic . .
A.) decrease in temperature.
B.) increase in temperature.
C.) decrease in salinity.
D.) increase in salinity.
A decrease in temperature could account for the weakening of hurricanes when they reach the Atlantic Ocean. hence option A is the correct answer.
How is Hurricane formed?There must be warm ocean water and wet, humid air in the area for one to form. When humid air flows upward at a low-pressure zone over warm ocean water, water is released from the air, resulting in storm clouds. The air in a hurricane rotates as it rises.
Hurricanes begin with the evaporation of warm seawater, which causes water to be pumped into the lower atmosphere. When converging winds collide and turn upwards, this humid air is pulled aloft.
Hurricanes arise when warm, moist air rises over sea. Cooler air replaces the rising air. Large clouds and thunderstorms continue to form as a result of this process. Because of the Coriolis Effect, these thunderstorms continue to expand and begin to rotate.
Learn more about Hurricane here:
https://brainly.com/question/18221136
#SPJ1
(Question) How many atoms are in 3 grams of Cu?
(20 points)
Answer: 2.85 x 10^22
Explanation:
We can use stoichiometry to convert grams to atoms.
*Important quantities*
Original amount of Copper: 3 grams
Molar mass of Copper: 63.5 grams
Avogadro's number: 6.022x10^23 atoms/formula units/molecules
Process - [tex]\frac{3gramCu}{1}[/tex]×[tex]\frac{1 mole Cu}{63.5 gCu}[/tex]×[tex]\frac{6.022x10x^{23} }{1 moleCu}[/tex] = 2.84503937×10^22
After taking sig figs into account, the answer needs to be rounded to 3 decimal places
Final answer: 2.85 x 10^22
What is true about the nature of light?
Select all that apply.
Light behaves as a wave, which is shown when it is passes through slits and produces a diffraction pattern.
Light can be reflected in different colors seen by the human eye.
Light is composed of small lines of color called photons.
Light behaves as a particle, which is shown when it is shines on a metal and produces current.
2
Select the correct answer from each drop-down menu.
How are real gases different from ideal gases?
Real gases differ from ideal gases because in a real gas,....
Answer:
Real gases particles are smaller than ideal gases
What particle limitation to the widespread of this reusable water bottles? Pls help someone
Answer: Plastic water bottles
Explanation:
If you use disposable water bottles, here are some important concerns you should know about how they’re made as well as the problems they cause for the planet, your health, and your wallet.
This energy diagram shows the allowed energy levels of an electron in a certain atom or molecule: energy Use this diagram to complete the table below. Which is the ground state? (pick one) How many excited states are there? How many lines are in the absorption line spectrum? Which transition causes the absorption line at the shortest wavelength? Which transition causes the absorption line at the longest wavelength?
The transition causing the absorption line at the longest wavelength is the transition from -2 to +2.
Ground State: -2
Number of Excited States: 4
Number of Lines in the Absorption Line Spectrum: 8
Transition Causing Absorption Line at Shortest Wavelength: -3 to -2
Transition Causing Absorption Line at Longest Wavelength: -2 to +2
The ground state is the state at the bottom of the diagram, which is -2.
There are 4 excited states, which are -3, -2, +1, and +2.
There are 8 lines in the absorption line spectrum, which are the 4 transitions from the ground state to the excited states, and the 4 transitions from the excited states back to the ground state.
The transition causing the absorption line at the shortest wavelength is the transition from -3 to -2.
The transition causing the absorption line at the longest wavelength is the transition from -2 to +2.
learn more about absorption here
https://brainly.com/question/24228588
#SPJ4
the diameter of a sodium atom, na, is larger than the diameter of a sodium ion, na , because the sodium ion has
Na+ has one fewer electron than Na, making it smaller and possessing a higher effective nuclear charge.
The fact that sodium ions have just two electron shells makes them smaller than sodium atoms for the main reason (the atom has three). Because they both have the same number of nucleons, the Na+ ion and Na atom have the same nuclear charge. Na+, on the other hand, has a smaller nuclear charge than Na because it has one fewer electron. Na+ is therefore smaller than Na because there is more attraction on the electrons that are already there. A sodium ion's size is smaller than that of a sodium atom.
Learn more about Nuclear Charge
brainly.com/question/17102072
#SPJ4
If 6.00 L of 3.00 M HCl is added to 5.00 L of 2.00 M Ca(OH)2, which species will be the limiting reactant
HCl will be the limiting reactant for the above question
When HCl and Ca(OH)2 are mixed, they react to form water and calcium chloride (CaCl2) according to the following equation: HCl(aq) + Ca(OH)2(aq) -> CaCl2(aq) + 2H2O(l). To determine which species is the limiting reactant, we need to compare the amount of HCl and Ca(OH)2 present in the reaction.The number of moles of HCl present in the reaction is given by the equation n=CV, where n is the number of moles, C is the concentration of the solution and V is the volume. Hence number of HCL moles is:
n = 3.00 M 6.00L = 18.0 moles The number of moles of Ca(OH)2 present in the reaction is given by the equation n=CV, where n is the number of moles, C is the concentration of the solution and V is the volume. So the number of moles of Ca(OH)2 is: n = 2.00 M 5.00L = 10.0 moles. The number of moles of HCl is greater than the number of moles of Ca(OH)2, so HCl will be the limiting reactant.
Learn more about limiting reactant here:
https://brainly.com/question/14225536
#SPJ4
Everyone!
Give a Question/Problem for Hot and Cold Compress Pillow
Thank you!!
Answer:
are u good at geometry math? their are some questions I didn't understand it PLEASE
How are the boiling point and freezing point of a solvent affected when a solute is added?
O Both the boiling point and the freezing point decrease.
O Both the boiling point and the freezing point increase.
O The boiling point increases, and the freezing point decreases.
O The boiling point decreases, and the freezing point increases.
Answer:
the boiling point increases and the freezing point decreases.
Iron objects such as storage tanks and underground pipelines can be protected from corrosion by connecting them through a wire to a piece of : Ag
Pb
Sn
Mg
Cu
Iron objects such as storage tanks and underground pipelines can be protected from corrosion by connecting them through a wire to a piece of Mg.
General corrosion happens when the majority or even all atoms on such a metal surface become oxidized, causing the surface to corrode completely. The majority of metals were easily oxidised, which means they frequently lose oxygen electrons (among other elements) in the air either in water. Oxygen joins with the metal to produce an oxide as it becomes reduced (gains electrons).
A refined metal usually transformed naturally by corrosion into a safer stable chemical form, including its oxide, hydroxide, and sulphide. By reacting chemically and/or electrochemically with their surroundings, materials slowly degrade. Additionally, it gradually eliminates the element using chemical processes.
To know more about corrosion
https://brainly.com/question/30057568
#SPJ4
Entropy and the inefficiency of energy transfer are part of __________________. the first law of thermodynamics the second law of thermodynamics the third law of thermodynamics system resiliency feedback systems
Entropy and the inefficiency of energy transfer are part of the Second Law of Thermodynamics.
The first law of thermodynamics states that neither creation nor destruction of energy is possible. The universe becomes more entropic when a spontaneous process occurs, according to the second law of thermodynamics. Thermodynamics' third law: The entropy of a perfect crystal is 0 at absolute zero Kelvin. The overall entropy of a system may only ever increase or stay constant during spontaneous processes, according to the second law of thermodynamics. If the physical process is irreversible, the overall entropy of the system and its surroundings must increase. For a process to be irreversible, the final entropy needs to be higher than the starting entropy: Sf > Si (irreversible process). The overall entropy of a system and its surroundings can remain constant when a system is in thermodynamic equilibrium or undergoing a reversible process. The second law is sometimes known as the Law of Increased Entropy.
To learn more about entropy click here https://brainly.com/question/24278877
#SPJ4
help help help help help helps
Answer:
C may be the correct answer
How does glycolysis make 32 ATP?
Both anaerobic and aerobic conditions can result in glycolysis. Pyruvate joins the citric acid cycle under aerobic conditions and proceeds through oxidative phosphorylation, which results in the net synthesis of 32 ATP molecules.
What is an example of anaerobic activity?Anaerobic exercises require small bursts of energy and are finished rapidly while exerting maximum effort. Examples include jumping, jogging, and hard weightlifting. Your breathing and heart rate alter as you engage in aerobic vs anaerobic activities. During aerobic workouts, oxygen is your major source of energy.
What exactly does it mean to be anaerobic?Anaerobic means "without oxygen," whereas aerobic indicates the existence of oxygen. Both are important for your overall health since they put your body through different difficulties. Anaerobic exercise consists of short bursts of high-intensity activity that do not demand your body to consume oxygen as it would during cardio (or aerobic) exercise.
Here,
Glycolysis can occur under both anaerobic and aerobic settings. Under aerobic circumstances, pyruvate enters the citric acid cycle and goes through oxidative phosphorylation, resulting in the net production of 32 ATP molecules.
To know more about anaerobic respiration visit:
https://brainly.com/question/13515664
#SPJ4
Why are the elements in Groups 1 and 17 so reactive?
Fluorine as well as chlorine are among the substances in group 17. Alkali metals as well as hydrogen are both part of group 1 on the periodic table.
Group 1 elements were extremely reactive due to the fact that they only contain one valence electron. As just a result, atoms were only ever combined with some other elements present in nature.
Due to their size as well as low ionisation enthalpy, alkali metals were extremely reactive metals. Moving lower in the group causes them to become more reactive. Reactivity to air: These metals discolor when exposed to dry air because oxides create, which then react with moisture to generate hydroxides.
To know more about Reactivity
https://brainly.com/question/1598581
#SPJ4
yousab cycles at an average speed of 12 km/h. how far has he travelled if he cycles for 2 hours
Answer:
24 km
Explanation:
(12 km/hr)(2 hrs) = 24 km
How many atoms are indicated by the prefixes for each of the following items. drag each item to the appropriate bin
tetrisdide montui donde bro utracondo chloride triponthou Decode 1 atom 2 atoms 3 atoms 4 stoms 5 atoms 6 atoms
The prefixes you provided do not correspond to any known chemical element or compound. The prefixes used in chemistry typically come from Greek or Latin and indicate the number of atoms present in a molecule of a certain element or compound.
For example, "mono-" indicates 1 atom, "di-" indicates 2 atoms, "tri-" indicates 3 atoms, "tetra-" indicates 4 atoms, and so on. prefixes let me know if you have any other question
Mono - 1 - montui, chloride
di - 2 atoms - donde
tri - 3 atoms - triponthou
tetra - 4 atoms - tetrisdide
utra - 5 atoms - utracondo are prefixes .
Learn more about prefixes here:
https://brainly.com/question/13679502
#SPJ4
A scientist distilled a quantity of water to use in an experiment. How much water did he collect if the condensation process released 9040 J of energy? H2O (l) -> H2O (g) ΔHv=2260 J/g a 0.0138 mol b 0.222 mol c 4.00 mol d 0.250 mol I really need the answer plz
Answer:
I know this is very late I am sorry, but
I believe your answer would be C) 4.00 mol.
Correct me if I am wrong.
Explanation:
9040 divided by 2260= 4
0.222 moles of water released 9040 J of energy.
The heat of vaporization is defined as the heat required to convert 1 g of a substance from liquid to vapor. We are told that the heat of vaporization of water is 2260 J/g.
Hence;
1g of water releases 2260 J of heat
xg of water releases 9040 J of heat
x = 1g × 9040 J /2260 J
x = 4 g
1 mole of water contains 18 g
x moles of water contains 4 g
x = 1 mole × 4 g/18 g
x = 0.222 moles
Learn more: https://brainly.com/question/10165688
What is the relative rate of diffusion of CH4 and NO2?
Answer:
=32×1632×√1632=34√2.
Explanation:
What volume of a 0.120 M CaI2 solution would contain 0.078 mol of the solute? A. 35.0 mL O B. 65.0 mL O C. 350 mL O D. 650 mL
650 mL,In order to obtain the volume of solution necessary to provide a given amount of solute in moles, one needs to take the number of moles and divide by the solution concentration in molarity.
Molar concentration, also known as molarity, quantity concentration, or substance concentration, is a unit used to describe the amount of a substance in a solution expressed as a percentage of its volume. The number of moles per liter, denoted by the unit sign mol/L or mol/dm in SI units, is the most often used unit denoting molarity in chemistry. One mol/L of a solution's concentration is referred to as one molar, or 1 M.
learn more about molarity Refer:brainly.com/question/8732513
#SPJ4
Select the correct answer. which gas is the most abundant greenhouse gas?
a. ozone
b. chlorofluorocarbon
c. carbon dioxide
d. methane
e. water vapor
E) The most significant and prevalent greenhouse gas is water vapor. Ozone, carbon dioxide, methane, nitrous oxide, and other gases are also present.
Which major source of greenhouse gases is it?Over the past 150 years, almost all of the rise in atmospheric greenhouse gases has been caused by human activities. Burning fossil fuels for transportation, electricity, and heating is the primary human activity in the United States that contributes to the emission of greenhouse gases.
Which four greenhouse gases have the greatest impact?The greenhouse gases on Earth warm the planet by storing heat in the atmosphere. Carbon dioxide, methane, nitrous oxide, and water vapor—all of which are found naturally—as well as fluorinated gases—which are made—are the main gases that cause the greenhouse effect.
To learn more about water vapor here:
https://brainly.com/question/14529481
#SPJ1
Classify the reaction in each of the following equations.
a. BaCl2 (aq) + K2CrO4 (aq) → BaCrO4 (s) + 2KCl(aq)
b. Si(s) + 2Cl2 (g) → SiCl4 (l)
Answer:
a) Double replacement
b) Synthesis
Explanation:
a) For A, we have two ionic reactants that form two ionic products, where the anion (or cation) is swapped. This is a characteristic of a double replacement reaction.
b) For B, two elements, this time two elements, react together to form one product that's unlike the reactants. This is a characteristic of a synthesis reaction.
What is the molarity of a solution that contains 2.21 moles of MgBr2 in 2.93 L of solution?
Answer:
0.754M MgBr2
Explanation:
Molarity = Moles/Volume(liters)
2.21/2.93 = 0.754M MgBr2