Answer:
The distance is [tex]d = 1.747 *10^{-6} \ m[/tex]
Explanation:
From the question we are told that
The order of maximum diffraction is m = 2
The wavelength is [tex]\lambda = 775 nm = 775 * 10^{-9} \ m[/tex]
The angle is [tex]\theta = 62.5^o[/tex]
Generally the condition for constructive interference for diffraction grating is mathematically represented as
[tex]dsin \theta = m * \lambda[/tex]
where d is the distance between the lines on a diffraction grating
So
[tex]d = \frac{m * \lambda }{sin (\theta )}[/tex]
substituting values
[tex]d = \frac{2 * 775 *1^{-9} }{sin ( 62.5 )}[/tex]
[tex]d = 1.747 *10^{-6} \ m[/tex]
A student is trying to decide what to wear.His bedroom is at 20.0 °C.His skin temperature is 35.0 °C.The area of his exposed skin is 1.50 m².People all over the world have skin that is dark in the infrared,with emissivity about 0.900.Find the net energy transfer from his body by radiation in 10.0 min.
Answer:
vgghcgkxcjpfiffj,ncfzfzujfzxxxoifkc xuzrusdoxTXcxgifdhh
A sample of lead has a mass of 26.00 kg and a density of 1.130 104 kg/m3 at 0°C. (Assume the average linear expansion coefficient for lead is 2.900 10-5(°C-1).)
(a) What is the density of lead at 82.00°C? (Give your answer to four significant figures.)
____ kg/m3
(b) What is the mass of the sample of lead at 82.00°C?
_____ kg
Answer:
Explanation:
coefficient of linear expansion α = 2.9 x 10⁻⁵
coefficient of volume expansion γ = 3 x 2.9 x 10⁻⁵ = 8.7 x 10⁻⁵
[tex]d_t = d_0( 1 - \gamma t )[/tex]
[tex]d_{82} = 1.13\times 10^4( 1 - 8.7\times 10^{-5}\times82 )[/tex]
= 1.13 x 10⁴ - 806.14 x 10⁻¹
= 1.13 x 10⁴ - 0.00806 x 10⁴
= 1.1219 x 10⁴ kg / m³
b ) mass of the sample will remain the same as mass does not increase or decrease with temperature .
A planet in another solar system orbits a star with a mass of 5.0 x 1030 kg. At one point in its orbit, it is 150 x 106 km from the star and is moving at 55 km/s. What is the semimajor axis of the planet's orbit
Answer:
32
Explanation:
Three point charges (some positive and some negative) are fixed to the corners of the same square in various ways, as the drawings show. Each charge, no matter what its algebraic sign, has the same magnitude. In which arrangement (if any) does the net electric field at the center of the square have the greatest magnitude?
Answer:
The magnitude of the net field located at the center of the square is the same in every of arrangement of the charges.
Isaac drop ball from height og 2.0 m, and it bounces to a height of 1.5 m what is the speed before and after the ball bounce?
Explanation:
It is given that, Isaac drop ball from height of 2.0 m, and it bounces to a height of 1.5 m.
We need to find the speed before and after the ball bounce.
Let u is the initial speed of the ball when he dropped from height of 2 m. The conservation of energy holds here. So,
[tex]\dfrac{1}{2}mu^2=mgh\\\\u=\sqrt{2gh} \\\\u=\sqrt{2\times 9.8\times 2} \\\\u=6.26\ m/s[/tex]
Let v is the final speed when it bounces to a height of 1.5 m. So,
[tex]\dfrac{1}{2}mv^2=mgh\\\\v=\sqrt{2gh} \\\\v=\sqrt{2\times 9.8\times 1.5} \\\\v=5.42\ m/s[/tex]
So, the speed before and after the ball bounce is 6.26 m/s and 5.42 m/s respectively.
A narrow beam of light containing red (660 nm) and blue (470 nm) wavelengths travels from air through a 2.60 cm thick flat piece of crown glass and back to air again. The beam strikes the glass at a 28.0° incident angle.
A) At what angles do the two colors emerge?
B) By what distance are the red and blue separated when they emerge?
Answer:
A: 28°
B. 1x10^-3M
Explanation:
See attached file
Two long parallel wires separated by 4.0 mm each carry a current of 24 A. These two currents are in the same direction. What is the magnitude of the magnetic field at a point that is between the two wires and 1.0 mm from one of the two wires
Answer:
Explanation:
Magnetic field at a a point R distance away
B = μ₀ / 4π X 2I / R where I is current
Magnetic field due to one current
= 10⁻⁷ x 2 x 24 / 1 x 10⁻³
48 x 10⁻⁴ T
Magnetic field due to other current
= 10⁻⁷ x 2 x 24 / 3x 10⁻³
16 x 10⁻⁴ T
Total magnetic field , as they act in opposite direction, is
= (48 - 16 ) x 10⁻⁴
32 x 10⁻⁴ T .
1. A coil is formed by winding 250 turns of insulated 16-gauge copper wire, that has a diameter d = 1.3 mm, in a single layer on a cylindrical form of radius 12 cm. What is the resistance of the coil? Neglect the thickness of the insulation and the resistivity of copper is ???? = 1.69 × 10−8 Ω ∙ m.
Answer:
2.39 Ω
Explanation:
Given that
Number of winnings on the coil, = 250 turns
Radius if the copper wire, r(c) = 1.3/2 = 0.65 mm
Radius of single cylinder layer, R = 12 cm
Length of the cylinderical coil, L = 250 * 2π * 12 = 188.4 m
Resistivity of copper, ρ = 1.69*10^-8 Ωm
Area is πr(c)², which is
A = 3.142 * (0.65*10^-3)²
A = 3.142 * 4.225*10^-7
A = 1.33*10^-6 m²
The formula for resistance is given as
R = ρ.L/A, if we substitute, we have
R = (1.69*10^-8 * 188.4) / 1.33*10^-6
R = 3.18*10^-6 / 1.33*10^-6
R = 2.39 Ω.
Therefore, the resistance is 2.39 Ω
Which examples are simple machines?
Select all correct answers.
a hammer
an automobile
O a pulley
an inclined plane
The temperature gradient between the core of Mars and its surface is approximately 0.0003 K/m. Compare this temperature gradient to that of Earth. What can you determine about the rate at which heat moves out of Mars’s core compared to Earth?
Answer:
The temperature gradient between the core of Mars and its surface is lower than that on Earth. So, heat moves outward more slowly on Mars than on Earth.
Explanation:
Answer:
The temperature gradient between the core of Mars and its surface is lower than that on Earth. So, heat moves outward more slowly on Mars than on Earth.
Explanation:
Edmentum sample answer
You have explored constructive interference from multi-layer thin films. It is also possible for interference to be destructive, a phenomenon exploited in making antireflection coatings for optical elements such as eyeglasses. In order to allow the lenses to be thinner (and thus lighter weight), eyeglass lenses can be made of a plastic that has a high index of refraction (np = 1.70). The high index causes the plastic to reflect light more effectively than does glass, so it is desirable to reduce the reflection to avoid glare and to allow more light to reach the eye. This can be done by applying a thin coating to the plastic to produce destructive interference.
a. Consider a plastic eyeglass lens with a coating of thickness d with index nc . Light with wavelength is incident perpendicular to the lens. If nc < n p , then determine an equation for d in terms of the given variables (and an integer m) in order for there to be destructive interference between the light reflected from the top of the coating and the light reflected from the coating/lens interface.
b. Repeat part a assuming that nc > n p .
c. Choose a suitable value for nc and calculate a value for d that will result in destructive interference for 500 nm light. Note that materials to use for coatings that have nc < 1.3 or nc > 2.5 are difficult to find.
d. Does the index of refraction n p of the eyeglass lens itself matter? Explain.
Answer:
a) d sin θ = m λ₀ / n
b) d sin θ = (m + ½) λ₀ / n
c) d = 2,439 10⁻⁷ m
Explanation:
For the interference these rays of light we must take as for some aspects,
* when a beam of light passes from a medium with a lower index to one with a higher index, the reflected ray has a phase change of 18º, this is equivalent to lam / 2
* when the ray penetrates the lens the donut length changes by the refractive index
λ = λ₀ / n
now let's write the destructive interference equation for these lightning bolts
d sin θ = (m´ + 1/2 + 1/2) λ / n = (m` + 1) λ₀ / n
d sin θ = m λ₀ / n
b) now nc> np
in this case there is no phase change in the reflected ray and the equation for destructive interference remains
d sin θ = (m + ½) λ₀ / n
c) select the value of nc = 2.05 of the ZnO
we calculate the thickness of the film (d)
d = m λ / (n sin 90)
in this type of interference the observation is normal, that is, the angle is 90º)
d = 1 500 10-9 / (2.05 1)
d = 2,439 10⁻⁷ m
d) the lens replacement index is very important because it depends on its relation with the film index which equation to destructively use interference
A conducting sphere contains positive charge distributed uniformly over its surface. Which statements about the potential due to this sphere are true? All potentials are measured relative to infinity. (There may be more than one correct choice.)
Hello. This question is incomplete. The full question is:
A conducting sphere contains positive charge distributed uniformly over its surface. Which statements about the potential due to this sphere are true? All potentials are measured relative to infinity. (There may be more than one correct choice.)
A) The potential is lowest, but not zero, at the center of the sphere. B) The potential at the center of the sphere is zero. C) The potential at the center of the sphere is the same as the potential at the surface. D) The potential at the surface is higher than the potential at the center. E) The potential at the center is the same as the potential at infinity
Answer:
C) The potential at the center of the sphere is the same as the potential at the surface.
Explanation:
When a conductive sphere has charges that distribute evenly on its surface, it means that its interior has a zero charge cap. As a result, the outside of this sphere has a charge distribution that will be the same if the center of the sphere were charged. In this way, the center and the surface of the sphere become identical in relation to the point charge potential. In other words, this means that the null interior of the sphere has a constant potential that makes the distribution of charges within the sphere exactly equal to the distribution of charges outside the sphere.
The statement that should be true regarding the sphere is The potential at the center of the sphere.
Potential at the sphere center:Here the normal formula should be used i.e. kq/R that should be determined by considering the potential at infinity also it does not contain any intervening dielectric like zero.
Also,
kq/R+c,
Here c is constant is necessary to fit with respect to the zero potential.
Hence, The statement that should be true regarding the sphere is The potential at the center of the sphere.
Learn more about sphere here: https://brainly.com/question/16684376
You want the output current from the secondary coil of a transformer to be 10 times the input current to the primary coil. The ratio of the number of turns N2/N1 must be:_____________.
A. 100
B. 10
C. 1
D. 0.1
Answer:
D. 0.1
Explanation:
Using transformer equation,
N2/N1 = I1/I2................... Equation 1
Where N2 = secondary coil, N1 = primary coil, I1 = input current, I2 = output current.
make I2 the subject of the equation
I2 = I1/(N2/N1)............ Equation 2
From equation 2 above, For the output current of the secondary coil to be 10 times the input current, N2/N1 = 0.1
Hence the right option is D. 0.1
An apple falls from a tree and hits your head with a force of 9J. The apple weighs 0.22kg. How far did the apple fall?
Answer:
The apple fell at a distance of 4.17 m.
Explanation:
Work is defined as the force that is applied on a body to move it from one point to another. When a force is applied, an energy transfer occurs. Then it can be said that work is energy in motion.
When a net force is applied to the body or a system and this produces displacement, then that force is said to perform mechanical work.
In the International System of Units, work is measured in Joule. Joule is equivalent to Newton per meter.
The work is equal to the product of the force by the distance and by the cosine of the angle that exists between the direction of the force and the direction that travels the point or the object that moves.
Work=Force*distance* cosine(angle)
On the other hand, Newton's second law says that the acceleration of a body is proportional to the resultant of forces on it acting and inversely proportional to its mass. This is represented by:
F=m*a
where F is Force [N], m is Mass [kg] and a Acceleration [m / s²]
In this case, the acceleration corresponds to the acceleration of gravity, whose value is 9.81 m / s². So you have:
Work= 9 JF=m*a=0.22 kg*9.81 m/s²= 2.1582 Ndistance= ?angle=0 → cosine(angle)= 1Replacing:
9 J= 2.1582 N* distante* 1
Solving:
[tex]distance=\frac{9J}{2.1582 N*1}[/tex]
distance= 4.17 m
The apple fell at a distance of 4.17 m.
The fractional change of reacting mass to energy in a fission reactor is about 0.1%, or 1 part in a thousand. For each kilogram of uranium that is totally fissioned, how much energy is released
Answer:
9*10^13 J
Explanation:
Given that
mass of the material, m = 0.001 kg
speed of light, c = 3*10^8 m/s
To solve this, we would be adopting Einstein's mass - energy relation...
E = mc²
Where
E = Energy, in joules
m = mass, in kg
c = speed of light, in m/s
E = 0.001 * (3*10^8)²
E = 0.001 * 9*10^16
E = 9*10^13 J
Thus, the total energy released would be 9*10^13 J
An aluminum cup of mass 150 g contains 800 g of water in thermal equilibrium at 80.0°C. The combination of cup and water is cooled uniformly so that the temperature decreases by 1.50°C per minute. At what rate is energy being removed by heat? Express your answer in watts.
Answer:
Heat Flow Rate : ( About ) 87 W
Explanation:
The heat flowing out of the system each minute, will be represented by the following equation,
Q( cup ) + Q( water ) = m( cup ) [tex]*[/tex] c( al ) [tex]*[/tex] ΔT + m( w ) [tex]*[/tex] c( w ) [tex]*[/tex] ΔT
So as you can see, the mass of the aluminum cup is 150 grams. For convenience, let us convert that into kilograms,
150 grams = .15 kilograms - respectively let us convert the mass of water to kilograms,
800 grams = .8 kilograms
Now remember that the specific heat of aluminum is 900 J / kg [tex]*[/tex] K, and the specific heat of water = 4186 J / kg [tex]*[/tex] K. Therefore let us solve for " the heat flowing out of the system per minute, "
Q( cup ) + Q( water ) = .15 [tex]*[/tex] ( 900 J / kg [tex]*[/tex] K ) [tex]*[/tex] 1.5 + .8 [tex]*[/tex] ( 4186 J / kg [tex]*[/tex] K ) [tex]*[/tex] 1.5,
Q( cup ) + Q( water ) = 5225.7 Joules
And the heat flow rate should be Joules per minute,
5225.7 Joules / 60 seconds = ( About ) 87 W
A motorcycle travels up one side of a hill over the top and down the other side. The crest of the hill can be considered to be a circular arc with radius of 45.0 m. Determine the maximum speed that the cycle can have while moving over the crest without losing contact with the road.
Answer:
The maximum speed of the motorcycle should be 21 m/s
Explanation:
Since the hill is considered to be a circular arc, the motorcycle will experience centripetal force that tends to flip it away from the center of the hill.
Since the motorcycle does not lose contact with the ground, it means that the weight of the motorcycle downwards just balances the centripetal force on the motorcycle.
we know that the centripetal force on the motorcycle is equal to
centripetal force = [tex]\frac{mv^{2} }{r}[/tex]
where m is the mass of the motorcycle,
v is the velocity of the motorcycle,
and r is the radius of the hill = 45.0 m
Also we now that the weight of the motorcycle is equal to
weight = mg
where m is still the mass of the motorcycle,
and g is the acceleration due to gravity = 9.81 m/s
Equating the both forces since they are equal, we'll have
[tex]\frac{mv^{2} }{r}[/tex] = mg
the mass of the motorcycle will cancel out, and we'll be left with
[tex]v^{2} = gr[/tex]
[tex]v = \sqrt{gr}[/tex]
[tex]v = \sqrt{9.81*45}[/tex]
[tex]v = \sqrt{441.45}[/tex]
[tex]v[/tex] = 21 m/s
Which scientist proved experimentally that a shadow of the circular object illuminated 18. with coherent light would have a central bright spot?
A. Young
B. Fresnel
C. Poisson
D. Arago
Answer:
Your answer is( D) - Arago
In a double-slit arrangement the slits are separated by a distance equal to 150 times the wavelength of the light passing through the slits. (a) What is the angular separation between the central maximum and an adjacent maximum
Complete Question
In a double-slit arrangement the slits are separated by a distance equal to 150 times the wavelength of the light passing through the slits. (a) What is the angular separation between the central maximum and an adjacent maximum? (b) What is the distance between these maxima on a screen 57.9 cm from the slits?
Answer:
a
[tex]\theta = 0.3819^o[/tex]
b
[tex]y = 0.00386 \ m[/tex]
Explanation:
From the question we are told that
The slit separation is [tex]d = 150 \lambda[/tex]
The distance from the screen is [tex]D = 57.9 \ cm = 0.579 \ m[/tex]
Generally the condition for constructive interference is mathematically represented as
[tex]dsin (\theta ) = n * \lambda[/tex]
=> [tex]\theta = sin ^{-1} [\frac{n * \lambda }{ d } ][/tex]
where n is the order of the maxima and value is 1 because we are considering the central maximum and an adjacent maximum
and [tex]\lambda[/tex] is the wavelength of the light
So
[tex]\theta = sin ^{-1} [\frac{ 1 * \lambda }{ 150 \lambda } ][/tex]
[tex]\theta = 0.3819^o[/tex]
Generally the distance between the maxima is mathematically represented as
[tex]y = D tan (\theta )[/tex]
=> [tex]y = 0.579 tan (0.3819 )[/tex]
=> [tex]y = 0.00386 \ m[/tex]
Two slits are separated by 0.370 mm. A beam of 545-nm light strikes the slits, producing an interference pattern. Determine the number of maxima observed in the angular range−26.0° ≤ θ ≤ 26.0°.
Answer:
There are 586maxima
Explanation:
Pls see attached file
Astronomers have recently observed stars orbiting at very high speeds around an unknown object near the center of our galaxy. For stars orbiting at distances of about 1014 m from the object, the orbital velocities are about 106 m/s. Assume the orbits are circular, and estimate the mass of the object, in units of the mass of the sun (MSun = 2x1030 kg). If the object was a tightly packed cluster of normal stars, it should be a very bright source of light. Since no visible light is detected coming from it, it is instead believed to be a supermassive black hole.
Answer:
The mass of the object is 745000 units of the sun
Explanation:
We know that the centripetal force with which the stars orbit the object is represented as
[tex]F_{c}[/tex] = [tex]\frac{mv^{2} }{r}[/tex]
and this centripetal force is also proportional to
[tex]F_{c}[/tex] = [tex]\frac{kMm}{r^{2} }[/tex]
where
m is the mass of the stars
M is the mass of the object
v is the velocity of the stars = 10^6 m/s
r is the distance between the stars and the object = 10^14 m
k is the gravitational constant = 6.67 × 10^-11 m^3 kg^-1 s^-2
We can equate the two centripetal force equations to give
[tex]\frac{mv^{2} }{r}[/tex] = [tex]\frac{kMm}{r^{2} }[/tex]
which reduces to
[tex]v^{2}[/tex] = [tex]\frac{kM}{r}[/tex]
and then finally
M = [tex]\frac{rv^{2} }{k}[/tex]
substituting values, we have
M = [tex]\frac{10^{14}*(10^{6})^{2} }{6.67*10^{-11} }[/tex] = 1.49 x 10^36 kg
If the mass of the sun is 2 x 10^30 kg
then, the mass of the the object in units of the mass of the sun is
==> (1.49 x 10^36)/(2 x 10^30) = 745000 units of sun
What are three ways synthetic polymers affect the environment?
Answer:
-Some synthetic polymers use materials from Earth that are nonrenewable.
-They can end up as waste products that sometimes can’t be recycled.
-They sometimes release toxins into the environment.
Explanation:
Synthetic polymers are types of polymers that are man made, that is they are polymers that are made in the labs or industries from chemical substances.
Such polymers include nylon, polyester, and polyethylene among others. These polymers are used to make many clothes and plastics that we use and see around.
Synthetic polymers have a range of disadvantages which includes. being non-biodegradable, these polymers and especially plastics may end up as waste products and pollutes the environment and end up in livers and lakes and this would be toxic for aquatic animals.
A telewision weighs 8.50 pounds. How many grams is this? (Hint: You need to
use two unit conversion fractions. 1 pound equals about 0.454 kg.)
Answer:
3859 g
Explanation:
1 pound = 0.454 kg
therefore, 8.50 ponds = 0.454*8.50 = 3.859
to covert kilograms into grams you need to multiply it by 1000
=3.859*1000
= 3859 grams
A flywheel is a mechanical device used to store rotational kinetic energy for later use. Consider a flywheel in the form of a uniform solid cylinder rotating around its axis, with moment of inertia I = 1/2 mr2.
Part (a) If such a flywheel of radius r1 = 1.1 m and mass m1 = 11 kg can spin at a maximum speed of v = 35 m/s at its rim, calculate the maximum amount of energy, in joules, that this flywheel can store?
Part (b) Consider a scenario in which the flywheel described in part (a) (r1 = 1.1 m, mass m1 = 11 kg, v = 35 m/s at the rim) is spinning freely at its maximum speed, when a second flywheel of radius r2 = 2.8 m and mass m2 = 16 kg is coaxially dropped from rest onto it and sticks to it, so that they then rotate together as a single body. Calculate the energy, in joules, that is now stored in the wheel?
Part (c) Return now to the flywheel of part (a), with mass m1, radius r1, and speed v at its rim. Imagine the flywheel delivers one third of its stored kinetic energy to car, initially at rest, leaving it with a speed vcar.
Answer:
a) 6738.27 J
b) 61.908 J
c) [tex]\frac{4492.18}{v_{car} ^{2} }[/tex]
Explanation:
The complete question is
A flywheel is a mechanical device used to store rotational kinetic energy for later use. Consider a flywheel in the form of a uniform solid cylinder rotating around its axis, with moment of inertia I = 1/2 mr2.
Part (a) If such a flywheel of radius r1 = 1.1 m and mass m1 = 11 kg can spin at a maximum speed of v = 35 m/s at its rim, calculate the maximum amount of energy, in joules, that this flywheel can store?
Part (b) Consider a scenario in which the flywheel described in part (a) (r1 = 1.1 m, mass m1 = 11 kg, v = 35 m/s at the rim) is spinning freely at its maximum speed, when a second flywheel of radius r2 = 2.8 m and mass m2 = 16 kg is coaxially dropped from rest onto it and sticks to it, so that they then rotate together as a single body. Calculate the energy, in joules, that is now stored in the wheel?
Part (c) Return now to the flywheel of part (a), with mass m1, radius r1, and speed v at its rim. Imagine the flywheel delivers one third of its stored kinetic energy to car, initially at rest, leaving it with a speed vcar. Enter an expression for the mass of the car, in terms of the quantities defined here.
moment of inertia is given as
[tex]I[/tex] = [tex]\frac{1}{2}[/tex][tex]mr^{2}[/tex]
where m is the mass of the flywheel,
and r is the radius of the flywheel
for the flywheel with radius 1.1 m
and mass 11 kg
moment of inertia will be
[tex]I[/tex] = [tex]\frac{1}{2}[/tex][tex]*11*1.1^{2}[/tex] = 6.655 kg-m^2
The maximum speed of the flywheel = 35 m/s
we know that v = ωr
where v is the linear speed = 35 m/s
ω = angular speed
r = radius
therefore,
ω = v/r = 35/1.1 = 31.82 rad/s
maximum rotational energy of the flywheel will be
E = [tex]Iw^{2}[/tex] = 6.655 x [tex]31.82^{2}[/tex] = 6738.27 J
b) second flywheel has
radius = 2.8 m
mass = 16 kg
moment of inertia is
[tex]I[/tex] = [tex]\frac{1}{2}[/tex][tex]mr^{2}[/tex] = [tex]\frac{1}{2}[/tex][tex]*16*2.8^{2}[/tex] = 62.72 kg-m^2
According to conservation of angular momentum, the total initial angular momentum of the first flywheel, must be equal to the total final angular momentum of the combination two flywheels
for the first flywheel, rotational momentum = [tex]Iw[/tex] = 6.655 x 31.82 = 211.76 kg-m^2-rad/s
for their combination, the rotational momentum is
[tex](I_{1} +I_{2} )w[/tex]
where the subscripts 1 and 2 indicates the values first and second flywheels
[tex](I_{1} +I_{2} )w[/tex] = (6.655 + 62.72)ω
where ω here is their final angular momentum together
==> 69.375ω
Equating the two rotational momenta, we have
211.76 = 69.375ω
ω = 211.76/69.375 = 3.05 rad/s
Therefore, the energy stored in the first flywheel in this situation is
E = [tex]Iw^{2}[/tex] = 6.655 x [tex]3.05^{2}[/tex] = 61.908 J
c) one third of the initial energy of the flywheel is
6738.27/3 = 2246.09 J
For the car, the kinetic energy = [tex]\frac{1}{2}mv_{car} ^{2}[/tex]
where m is the mass of the car
[tex]v_{car}[/tex] is the velocity of the car
Equating the energy
2246.09 = [tex]\frac{1}{2}mv_{car} ^{2}[/tex]
making m the subject of the formula
mass of the car m = [tex]\frac{4492.18}{v_{car} ^{2} }[/tex]
Electromagnetic waves are traveling in the vacuum of space. Calculate the wavelengths of these electromagnetic waves with the following frequencies. (Enter the first wavelength in pm and the second wavelength in cm.)
(a) 2.00 x 1019 Hz
(b) 4.50 x109 Hz
Answer:
(a) 1.5×10⁻¹¹ m.
(b) 6.7×10⁻² m
Explanation:
Note: All Electromagnetic wave travels in with the same speed, which 3×10⁸ m/s
(a) Give a frequency of 2.00×10¹⁹ Hz.
Using the equation of a wave,
V = λf................ Equation 1
Where V = Speed of electromagnetic wave, λ = wavelength, f = frequency.
make λ the subject of the equation
λ = V/f................. Equation 2
Given: f = 2.00×10¹⁹ Hz.
Constant: v = 3×10⁸ m/s.
Substitute into equation 2
λ = 3×10⁸/2.00×10¹⁹
λ = 1.5×10⁻¹¹ m.
(b) Similarly using
λ = v/f
Given: f = 4.5×10⁹ Hz, and v = 3×10⁸ m/s.
Substitute these values into equation 2 above.
λ = 3×10⁸/4.5×10⁹
λ = 6.7×10⁻² m
An object has an acceleration of 6.0 m/s/s. If the net force was doubled and the mass was one-third the original value, then the new acceleration would be _____ m/s/s.
Hahahahaha. Okay.
So basically , force is equal to mass into acceleration.
F=ma
so when F=ma , we get acceleration=6m/s/s
Force is doubled.
Mass is 1/3 times original.
2F=1/3ma
Now , we rearrange , and we get 6F=ma
So , now for 6 times the original force , we get 6 times the initial acceleration.
So new acceleration = 6*6= 36m/s/s
For the cellar of a new house, a hole is dug in the ground, with vertical sides going down 2.10 m. A concrete foundation wall is built all the way across the 8.90 m width of the excavation. This foundation wall is 0.189 m away from the front of the cellar hole. During a rainstorm, drainage from the street fills up the space in front of the concrete wall, but not the cellar behind the wall. The water does not soak into the clay soil. Find the force that the water causes on the foundation wall. For comparison, the weight of the water is given by 2.10 m ✕ 8.90 m ✕ 0.189 m ✕ 1000 kg/m3 ✕ 9.80 m/s2 = 34.6 kN.
Answer:
The force on the foundation wall is [tex]F_f = 191394 \ N[/tex]
Explanation:
From the question we are told that
The depth of the hole's vertical side is [tex]d = 2.10 \ m[/tex]
The width of the hole is [tex]b = 8.90 \ m[/tex]
The distance of the concrete wall from the front of the cellar is [tex]c = 0.189 \ m[/tex]
Generally the area which the water from the drainage covers is mathematically represented as
[tex]A = d * b[/tex]
substituting values
[tex]A = 2.10 * 8.90[/tex]
[tex]A = 18.69 \ m^2[/tex]
Now the gauge pressure exerted on the foundation wall is mathematically evaluated as
[tex]P_g = \rho * d_{avg} * g[/tex]
Here is the average height foundation wall where the pressure of the water is felt and it is evaluated as
[tex]d_{avg} = \frac{h_1 + h_2 }{2}[/tex]
where [tex]h_1[/tex] at the height at bottom of the hole which is equal to [tex]h_1 = 0[/tex]
and [tex]h_2[/tex] is the height at the top of the hole [tex]h_2 = d = 2.10[/tex]
[tex]d_{avg} = \frac{0 + 2.10 }{2}[/tex]
[tex]d_{avg} = 1.05[/tex]
Where [tex]\rho[/tex] is the density of water with constant value [tex]\rho = 1000 \ kg/m^3[/tex]
substituting values
[tex]P_g = 1000 * 1.05 * 9.8[/tex]
[tex]P_g = 10290 \ Pa[/tex]
Then the force exerted by the water on the foundation wall mathematically represented as
[tex]F_f = P_g * A[/tex]
substituting values
[tex]F_f = 10290 * 18.69[/tex]
[tex]F_f = 191394 \ N[/tex]
a uniform ladder of mass 100kg leans at 60° to the horizontal against a frictionless wall, calculate the reaction on the wall.
Answer:
[tex]500\text{N} (490\text{N}) (490.5\text{N})[/tex]
Explanation:
The reaction force is the force that is in the perpendicular direction to the wall.
We have an angle and a hypotenuse, we need to find the adjacent angle - so we can just use cos:
[tex]cos(\theta)=\frac{\text{adj}}{\text{hyp}}\\\text{hyp}*cos(\theta)=\text{adj}\\100*cos(60)=100*0.5=50\text{kg}[/tex]
However, we would like a force and not a mass.
[tex]W=mg\\W=50g\\W=500\text{N} (490\text{N}) (490.5\text{N})[/tex]
Answer 1 if you use g as 10, answer 2 if you're studying mechanics in maths, answer 3 if you're studying mechanics in physics.
Electric charge is distributed over the disk x2 + y2 ≤ 4 so that the charge density at (x, y) is rho(x, y) = 2x + 2y + 2x2 + 2y2 (measured in coulombs per square meter). Find the total charge on the disk.
Answer:
the total charge on the disk 256pi Coulombs
Explanation:
Pls see attached file
A merry-go-round is a common piece of playground equipment. A 3.0-m-diameter merry-go-round, which can be modeled as a disk with a mass of 300 kg , is spinning at 23 rpm. John runs tangent to the merry-go-round at 4.4 m/s, in the same direction that it is turning, and jumps onto the outer edge. John's mass is 30 kg.
Required:
What is the merry-go-round's angular velocity, in rpm, after John jumps on?
Answer:
The merry-go-round's angular velocity 23.84 RPM
Explanation:
Given;
diameter of merry go round, d = 3 m
radius of the merry go round, R = 1.5 m
mass of the merry go round, m = 300 kg
angular velocity = 23 rpm
velocity of John, v = 4.4 m/s
mass of John, m = 30 kg
Apply conservation of angular momentum;
[tex]L_i = L_f[/tex]
[tex]I \omega_i + mvR = (I + mR^2)\omega _f[/tex]
where;
I is moment of inertia of disk
[tex]I = \frac{1}{2} mR^2\\\\I = \frac{1}{2} *300*1.5^2\\\\I = 337.5 \ kg.m^2[/tex]
Substitute in this value in the above equation;
[tex]337.5(2\pi \frac{23}{60} ) + (30*4.4*1.5) = (337.5 + 30*1.5^2) \omega_f\\\\812.9925 \ + \ 198 = 405 \omega _f\\\\1010.9925 = 405 \omega _f\\\\\omega _f = \frac{1010.9925}{405} \\\\\omega _f = 2.496 \ rad/s[/tex]
1 rad/s = 9.5493 rpm
2.496 rad/s = 23.84 RPM
Therefore, the merry-go-round's angular velocity 23.84 RPM