Buoyancy force can be calculated with the equation
[tex]Fb = Vs × D × g[/tex]
where
Fb = the buoyancy force,Vs = the submerged volume,D = the density of the fluid the object is submerged in,g = the force of gravity.In this case, the weight of the ball is 5 kg and the density of the ball is 2× 10⁴kg/m³
Therefore the volume is given as
[tex]v = \frac{m}{d} = \frac{5}{2 \times 10 {}^{4} kgm {}^{ - 3} } \\ v = \: \frac{5}{20000} m {}^{ - 3} [/tex]
Substituting the given values in the equation, we get,
[tex]Fb=Vs \times D \times g \\ Fb = \frac{5}{20000} m {}^{3} \times 5000kgm {}^{ -3} \\ \times10ms {}^{ - 2} \\ = 12.5N[/tex]
Hence, the force of buoyancy is 12.5N.the main advantage to using the hst is the increased amount of "night time" viewing it affords.
The given statement "The main advantage to using the hst is the increased amount of night time viewing it affords" is not correct because
The HST (Hubble Space Telescope) does not provide increased night-time viewing, as it is located in space and orbits the Earth once every 97 minutes. It does not experience day and night cycles like telescopes on the ground, which are affected by Earth's rotation.
However, the HST does provide several advantages over ground-based telescopes. One major advantage is that it is above Earth's atmosphere, which can cause distortion and blurring of astronomical observations. The HST's location in space allows it to capture images with greater clarity and resolution than many ground-based telescopes.
Another advantage of the HST is its ability to observe in ultraviolet and infrared wavelengths, which are not easily observable from the ground due to atmospheric absorption. The HST's instruments can also detect and measure light from distant galaxies and stars, allowing astronomers to study the early universe and learn more about its evolution.
Hence, while the HST does not provide increased night-time viewing, it does offer several advantages over ground-based telescopes, including clearer and more detailed images, and the ability to observe in wavelengths not easily accessible from Earth's surface.
To know more about amount here
https://brainly.com/question/30630602
#SPJ1
what mass of gold is produced when 17.0 a of current are passed through a gold solution for 49.0 min ? express your answer with the appropriate units.
Approximately 16.3 grams of gold will be produced when 17.0 amperes of current are passed through a gold solution for 49.0 minutes.
How long does the current need to be passed through the solution to produce a certain mass of gold?We need to use Faraday's law of electrolysis, which states that the amount of substance produced at an electrode is directly proportional to the amount of electric charge that passes through the electrode.
The formula we will use is:
mass = (Q × M) / (n × F)
where:
- Q is the electric charge passed through the solution, measured in coulombs (C)
- M is the molar mass of the substance, measured in grams per mole (g/mol)
- n is the number of electrons transferred in the reaction (this is called the "stoichiometric coefficient")
- F is the Faraday constant, which is equal to 96,485 C/mol.
First, we need to determine the electric charge passed through the solution. We can use the formula:
Q = I × t
where:
- I is the current, measured in amperes (A)
- t is the time, measured in seconds (s)
Converting the given values into SI units, we get:
I = 17.0 A
t = 49.0 min × 60 s/min = 2940 s
So:
Q = I × t = 17.0 A × 2940 s = 49980 C
Next, we need to determine the molar mass of gold. The atomic weight of gold is 196.97 g/mol, so:
M = 196.97 g/mol
Finally, we need to determine the stoichiometric coefficient and the number of electrons transferred in the reaction. Without additional information, we will assume that the reaction is:
Au3+ + 3e- → Au
This means that the stoichiometric coefficient is 3, and three electrons are transferred for each gold atom produced.
Substituting the values into the formula, we get:
mass = (Q × M) / (n × F)
= (49980 C × 196.97 g/mol) / (3 × 96,485 C/mol)
= 16.3 g
Approximately 16.3 grams of gold will be produced when 17.0 amperes of current are passed through a gold solution for 49.0 minutes.
Learn more about Current passed from gold
brainly.com/question/19525085
#SPJ11
At point a, the magnetic field points 12. 3 degrees away from the vertical and has the magnitude of 5 nt (just outside of earth’s atmosphere).
(a) What would be the magnitude of the magnetic force on an electron be at Point A? The speed of the electron is 465 m/s. Tries 0/8
(b) What would be the magnitude of the acceleration of the at Point A?
The magnetic field is tilted toward the east at point A because it is 12.3 degrees off the vertical. A measure of the strength of the magnetic field, 5 nt (nanotesla) is given as the magnitude of the field at point A.
The following formula describes the magnetic force exerted on a charged particle that is moving:
F = q v B sin(theta)
Where F is the force, q is the particle's charge (in this case, an electron's charge[tex]-1.6 x 10^{-19}[/tex] [tex]C)[/tex], v is the particle's velocity, B (465[tex]m/s[/tex]) is the strength of the magnetic field, (5 nT =[tex]5 x 10^{-9}[/tex] [tex]T[/tex])and theta is the angle between the magnetic field vector, and the velocity vector (12.3 degrees = 0.214 radians).
(a) Plugging in the values, we get:
F =[tex](1.6 x 10^{-19}[/tex] [tex]C)[/tex][tex](465)m/s(5 x 10^{-9}[/tex] [tex]T)[/tex][tex]sin(0.214)[/tex]
F ≈[tex]1.02 x 10^{-17}[/tex] [tex]N[/tex]
Therefore, the magnitude of the magnetic force on an electron at Point A is approximately [tex]1.02 x10^{-17}[/tex][tex]N.[/tex]
(b) The acceleration of the electron can be found using the formula:
ᵃ = [tex]F/m[/tex]
where F is the magnetic force calculated above, and m is the mass of the electron [tex](9.11 x 10^{-31}[/tex] [tex]kg).[/tex]
Plugging in the values, we get:
ᵃ =[tex](1.02 x 10^{-17}[/tex][tex]N)/(9.11 x 10^{-31}[/tex] [tex]kg)[/tex]
ᵃ ≈[tex]1.12 x 10^{13}[/tex] [tex]m/s^{2}[/tex]
Therefore, the magnitude of the acceleration of the electron at Point A is approximate [tex]1.12 x 10^{13}[/tex] [tex]m/s^{2}[/tex].
To learn more about magnetic fields here
https://brainly.com/question/23096032
#SPJ4
What magnetic field strength is needed in each magnet to steer protons around the ring with a speed of 3.0 × 10^7 m/s? Assume that the field is uniform inside the magnet, zero outside.
A magnetic field strength of approximately 3.13 T is needed in each magnet to steer protons around the ring with a speed of[tex]3.0 × 10^7 m/s[/tex].
To steer protons around the ring with a speed of [tex]3.0 × 10^7 m/s[/tex], we need to apply a magnetic field perpendicular to their motion, which will exert a centripetal force on them and keep them moving in a circular path. The magnitude of this force is given by the equation:
[tex]F = mv^2/r[/tex]
where m is the mass of the proton, v is its speed, and r is the radius of the circular path.
The centripetal force is also equal to the magnetic force on the proton, given by the equation:
F = qvB
where q is the charge of the proton, v is its speed, and B is the magnetic field strength.
Setting these two equations equal to each other, we get:
[tex]mv^2/r = qvB[/tex]
Solving for B, we get:
B = mv/rq
Substituting the values for the mass and charge of the proton, and the speed and radius of the circular path, we get:
[tex]B = (1.67 × 10^-27 kg) × (3.0 × 10^7 m/s) / (0.28 m) / (1.6 × 10^-19 C) ≈ 3.13 T[/tex]
To know more about magnetic field refer to-
https://brainly.com/question/14848188
#SPJ11
how far should the lens be from the film (or in a present-day digital camera, the ccd chip) in order to focus an object that is infinitely far away (namely the incoming light rays are parallel with the principal axis of the system).
In order to focus an object that is infinitely far away, the lens in a present-day digital camera should be positioned at the focal length of the lens.
This is because the incoming light rays are parallel with the principal axis of the system, and when they pass through the lens, they converge to a point at the focal length. Therefore, positioning the lens at the focal length will allow the image of the distant object to be formed sharply on the CCD chip or film.
In order to focus on an object that is infinitely far away, where the incoming light rays are parallel with the principal axis of the system, the lens should be placed at a distance equal to its focal length from the film or CCD chip. This is because, when the light rays are parallel to the principal axis, they will converge at the focal point of the lens, which is located at the focal length distance from the lens. Therefore, placing the lens at its focal length from the film or CCD chip ensures a clear and focused image.
To know more about lens, refer
https://brainly.com/question/28039799
#SPJ11
Two identical 0.500-kg masses are pressed against opposite ends of a light spring of force constant 1.75 N/cm, compressing the spring by 17.0 cm from its normal length.
Find the speed of each mass when it has moved free of the spring on a frictionless, horizontal table.
Express your answer with the appropriate units.
The speed of each 0.500-kg mass when it has moved free of the spring is 2.29 m/s.
First, we need to find the potential energy stored in the compressed spring using Hooke's Law, which is PE = 0.5 * k * x^2, where PE is the potential energy, k is the spring constant (1.75 N/cm), and x is the compression (17.0 cm). Convert the spring constant to N/m (1.75 * 100 = 175 N/m) and the compression to meters (17.0 cm = 0.17 m).
Then, calculate the potential energy: PE = 0.5 * 175 * (0.17)^2 = 2.54875 J.
When the spring is released, the potential energy will be converted into kinetic energy, which is KE = 0.5 * m * v^2, where KE is the kinetic energy, m is the mass (0.500 kg), and v is the speed.
Since there are two masses, the kinetic energy will be evenly distributed between them.
Therefore, each mass will have a kinetic energy of KE/2 = 1.274375 J.
Now we can solve for the speed (v) of each mass using the kinetic energy equation: 1.274375 = 0.5 * 0.500 * v^2. Solving for v, we get v = sqrt(2 * 1.274375 / 0.500) = 2.29 m/s.
Summary: When the two identical 0.500-kg masses have moved free of the spring on a frictionless, horizontal table, their speed will be 2.29 m/s.
Learn more about Hooke's Law click here:
https://brainly.com/question/2648431
#SPJ11
if the force on an object is doubled, through what distance must it be moved so that the work done remains the same?
If the force on an object is doubled, the distance it must be moved so that the work done remains the same would be half of the original distance.
How much distance does an object need to be moved if the force acting upon it is doubled, in order to keep the work done on the object constant?If the force on an object is doubled, the distance it must be moved so that the work done remains the same is halved.
This is because work done (W) is equal to the force (F) applied to an object multiplied by the distance (d) it is moved:
W = F x d
If the force is doubled, the work done would also double, assuming the distance moved remains constant. To keep the work done the same, the distance moved would have to be halved, since:
W = F x d
2W = 2F x d/2
2W = F x (d/2)
So, if the force on an object is doubled, the distance it must be moved so that the work done remains the same would be half of the original distance.
Learn more about work done
brainly.com/question/31655489
#SPJ11
if the measurement of the velocity dispersion is too low, how would that affect the conclusion that dark matter was present in this cluster?
It is unlikely to change the conclusion that dark matter is present in the cluster. A low velocity dispersion may indicate that the cluster lacks sufficient mass to be kept together by gravity
The gravitational lensing effect gives evidence for extra matter that cannot be explained by visible matter alone, & is typically used to infer the existence of dark matter
It seems doubtful that the conclusion that dark matter is present in the cluster would be affected if the velocity dispersion is too low.
This is due to the fact that the measurement of the gravitational lensing effect & that causes light from background objects to bend as it travels through the cluster, is typically used to infer the presence of dark matter in galaxy clusters
The mass of the cluster may be calculated using the observed lensing, & it is frequently discovered that this mass is significantly more than the mass calculated using the velocity dispersion of the individual cluster members
To know more about velocity-
brainly.com/question/30559316
#SPJ4
a tug boat is lugging a cable of 8km long which has signal receivers on it. the receivers are evenly distributed with a distance of 12.5m between each of them. the boat keeps moving forward and every 50 meters, it fires a signal wave downwards the seabed. the signal is then bounced back and received by receivers on the cable. the middle point between the position where the signal was fired and the receiver picking up this very signal is called tmp. therefore, one fired signal has 1 tmp per receiver but there're so many receivers on the cable. so one fired signal can have many tmp's. but one tmp may be corresponded to many signal/receiver pair as the boat is moving and it keeps firing. question is how many fold (signal/receiver pair) for one tmp?
The number of signal/receiver pairs for one TMP is variable.
What determines signal/receiver pairs?The distance between two adjacent receivers on the cable is 12.5 meters, which means that there are 8000 / 12.5 = 640 receivers in total.
When the boat fires a signal wave downwards, it will bounce back from the seabed and reach the receivers on the cable. The time it takes for the signal to travel from the boat to the receiver is proportional to the distance between them. Therefore, each receiver will receive the signal at a slightly different time, depending on its distance from the boat.
The middle point between the position where the signal was fired and the receiver picking up the signal is called the Time-Mid-Point (TMP). For a given signal, there will be one TMP per receiver, as the position of the receiver is fixed. However, for a given TMP, there may be multiple signal/receiver pairs, as the boat keeps moving and firing signals.
The distance between the boat and the receiver is given by:
[tex]d = sqrt((50n)^2 + (12.5m)^2)[/tex]
where n is an integer representing the distance between the firing position and the receiver, in units of 50 meters.
The time it takes for the signal to travel this distance is given by:
t = d / c
where c is the speed of light. Since the speed of light is constant, the time t is proportional to the distance d.
Therefore, for a given TMP, there will be multiple signal/receiver pairs, corresponding to different values of n. The number of pairs is given by the number of integers n that satisfy the equation for a given TMP.
Let TMP be the middle point between the firing position and the receiver at position r. Then the distance between TMP and the boat is given by:
d(TMP, boat) = 50n + (8km / 2) - r
where n is an integer representing the distance between the firing position and the receiver, in units of 50 meters.
For a given TMP, the integer n that satisfies this equation depends on the position of the receiver r. Specifically, we have:
n = (r - 8km / 2 + d(TMP, boat)) / 50
where the division is integer division (i.e., rounding down to the nearest integer).
Therefore, the number of signal/receiver pairs corresponding to a given TMP is the number of integers r that satisfy the equation for a given TMP, i.e., the number of receivers within
range of the signal at that TMP
Learn more about Sonar.
brainly.com/question/20510435
#SPJ11
a periodic wave is produced by a vibrating tuning fork. the amplitude of the wave would be greater if the tuning fork were:
If the tuning fork were struck more forcefully or had more mass, the periodic wave it produces would have a larger amplitude.
A tuning fork vibrates with a bigger amplitude as it is struck more forcefully, creating a wave with a larger amplitude. Similar to this, a heavier tuning fork will need more energy to get it to vibrate, producing a wave with a bigger amplitude.
Due to the wave's altered frequency and wavelength, the distance of the source from the wave can affect its amplitude in many ways as observed when listening the beats.
To know more about periodic waves, visit,
https://brainly.com/question/20594470
#SPJ4
A 4.21-kg watermelon is released from rest from the roof of an 27.8-m-tall building.a. Calculate the work done by gravity on the watermelon as it falls from the roof to theground.b.Calculate the net work done on the watermelon asit falls to the ground. Show clearly hoyou get your answer.c.Just before it hits the ground, what is the watermelon's kinetic energy? Show clearly howyou get your answer.d. Just before it hits the ground, what is the watermelon's speed? (Use energy techniques toanswer this.)
The watermelon's speed just before it hits the ground is 12.62 m/s.
What is Work Done?
Work Done is a measure of the energy transferred to or from an object by means of a force acting on the object as it moves through a displacement. It is defined as the product of the force acting on an object and the displacement of the object in the direction of the force.
The work done by gravity on the watermelon as it falls from the roof to the ground can be calculated using the formula:
Work = Force x Distance x cos(theta)
where force is the weight of the watermelon, distance is the height of the building, and theta is the angle between the force and the displacement (which is 0 degrees since the force is acting in the same direction as the displacement). The weight of the watermelon can be calculated using the formula:
Weight = Mass x Gravity
where mass is 4.21 kg and gravity is 9.81 m/s^2. Thus, the weight of the watermelon is:
Weight = 4.21 kg x 9.81 m/s^2 = 41.3061 N
Substituting the values, we get:
Work = 41.3061 N x 27.8 m x cos(0) = 1148.18 J
Therefore, the work done by gravity on the watermelon as it falls from the roof to the ground is 1148.18 J.
b. The net work done on the watermelon as it falls to the ground is equal to the work done by gravity, since no other forces are doing work on the watermelon. Thus, the net work done on the watermelon is 1148.18 J.
c. Just before it hits the ground, the watermelon's kinetic energy can be calculated using the work-energy principle, which states that the net work done on an object is equal to its change in kinetic energy. Since the watermelon was initially at rest, its initial kinetic energy is zero. Thus, the final kinetic energy just before it hits the ground is equal to the net work done on the watermelon:
Final kinetic energy = Net work done = 1148.18 J
Therefore, the watermelon's kinetic energy just before it hits the ground is 1148.18 J.
d. Just before it hits the ground, the watermelon's speed can be calculated using the formula for kinetic energy:
Kinetic energy = (1/2) x Mass x Velocity^2
Rearranging the formula and substituting the values we get:
Velocity = sqrt((2 x Kinetic energy) / Mass) = sqrt((2 x 1148.18 J) / 4.21 kg) = 12.62 m/s
To know more about Work Done visit;
https://brainly.com/question/25573309
#SPJ4
the electric potential in a regin of space as a function of position x is given by the equation v(x)
The statement "the electric potential in a region of space as a function of position x is given by the equation v(x)" means that the electric potential at any point in that region can be determined by plugging in the value of x into the equation v(x).
The units of electric potential are volts, and the equation v(x) may depend on various factors such as the distribution of charges in the region, the geometry of the region, and the properties of any surrounding materials. To calculate the electric field at a point in this region, one could take the derivative of v(x) with respect to x. This would give the rate of change of electric potential with respect to distance, and is a measure of the strength and direction of the electric field at that point.
Learn more about electric potential: https://brainly.com/question/9383604
#SPJ11
A group of particles of total mass 35 kg has a total kinetic energy of 378 j. the kinetic energy relative to the center of mass is 80 j. what is the speed of the center of mass?
The speed of the center of mass is 2.57 m/s.
The total kinetic energy (KE) of a system of particles can be expressed as:
KE = KEcm + KErel
where KEcm is the kinetic energy of the center of mass and KErel is the kinetic energy relative to the center of mass.
In this problem, we are given that the total mass (m) of the particles is 35 kg and the total kinetic energy is 378 J. We are also given that the kinetic energy relative to the center of mass is 80 J.
Using the formula for the kinetic energy relative to the center of mass:
KErel = (1/2)mv^2
where v is the speed of the center of mass.
Substituting the given values in the equation, we get:
80 J = (1/2)(35 kg)(v^2)
Simplifying and solving for v, we get:
v = sqrt((2*80 J) / (35 kg))
v = 2.57 m/s
The concept of the center of mass is important in understanding the motion of objects or systems of objects. It is the point in a system where the mass is concentrated and the system behaves as if all its mass is located at that point. The motion of a system can be described in terms of the motion of its center of mass.
To know more about center of mass click here
brainly.com/question/30745706
#SPJ11
A ball with volume 0. 0020 m3 floats in pure water of density 1000 kg/m3, only half-submerged. Calculate the mass of the ball
The mass of the ball is determined from its density as 2 kg.
What is the mass of the ball?The mass of the is calculated from the product of density of the ball and its volume.
Mass = Volume x Density
the volume of the ball = 0.0020 m³
the density of pure water is 1000 kg/m³
Mass = 0.0020 m³ x 1000 kg/m³
Mass = 2 kg
Thus, the mass of the ball is a function of its density and volume.
Learn more about density here: https://brainly.com/question/6838128
#SPJ1
Consider the sinusoidal voltage"(t)40 cos( [0tt 609) V
a) What is the maximum amplitude of the voltage?
b) What is the frequency in hertz?
c) What is the frequency in radians per second?
d) What is the phase angle in radians?
The voltage can be expressed as: v(t) = 40 cos(2π(60)t + 2π(9)t)
where 60 Hz is the frequency in hertz and 9 Hz is the frequency in radians per second.
a) The maximum amplitude of the voltage is 40 volts.
b) The frequency in hertz is 60 Hz.
c) The frequency in radians per second is 2π(60) + 2π(9) = 378 radians per second.
d) The phase angle in radians is the coefficient of the t-term inside the cosine function, which is 2π(9) = 18π/5 radians.
To know more about voltage refer to-
https://brainly.com/question/29445057
#SPJ11
What effort with a machine of efficiency 90% apply to lift a load of 180N if its effort arm is twice as long as it's load arm
We can use the formula for mechanical advantage to solve this problem:
Effort arm / Load arm = Load / Effort
An effort of 400N is required to lift the load of 180N with a machine of efficiency 90% if its effort arm is twice as long as its load arm.
Let the length of the load arm be x, then the length of the effort arm is 2x.
Plugging in the given values, we get:
2x / x = 180N / (Effort x 0.9)
Simplifying this equation, we get:
Effort = (2/0.9) x 180N
Effort = 400N
Therefore, an effort of 400N is required to lift the load of 180N with a machine of efficiency 90% if its effort arm is twice as long as its load arm.
Learn more about mechanical advantage ,
https://brainly.com/question/16617083
#SPJ4
this wood flume has a slope of 0.0019. what will be the discharge of water in it for a depth of 1 m? the wood is planed.
The discharge of water in the wood flume for a depth of 1 m is 19 liters per second.
To calculate the discharge of water in the wood flume, we can use the Manning's equation, which relates the flow rate, slope, hydraulic radius, and roughness of the channel. The Manning's equation is:
Q = [tex](1.49/n)A(R^2/3)S^0.5[/tex]
where Q is the flow rate, n is the roughness coefficient, A is the cross-sectional area of the channel, R is the hydraulic radius, and S is the slope of the channel.
Assuming a rectangular cross-section for the wood flume, the cross-sectional area A can be calculated as:
A = depth x width
Assuming a width of 1 meter, the cross-sectional area can be calculated as:
A = 1 m x 1 m = 1 [tex]m^2[/tex]
The hydraulic radius R can be calculated as:
R = A/P
where P is the wetted perimeter of the channel. Assuming the wood flume has vertical walls, the wetted perimeter can be calculated as:
P = 2 x depth + width
P = 2 x 1 m + 1 m = 3 m
Therefore, the hydraulic radius can be calculated as:
R = 1 [tex]m^2[/tex] / 3 m = 0.333 m
The roughness coefficient n depends on the type of channel material and can be estimated from tables. For a planed wood flume, the roughness coefficient can be taken as 0.015.
Finally, plugging in the values for A, R, S, and n into the Manning's equation, we can calculate the flow rate Q:
Q = (1.49/0.015)(1 [tex]m^2[/tex])(0.333[tex]m^(2/3)[/tex])(0.0019[tex])^0.5[/tex]
Q = 0.019 [tex]m^3[/tex]/s or 19 L/s
Therefore, the discharge of water in the wood flume for a depth of 1 m is 19 liters per second.
Learn more about hydraulic
https://brainly.com/question/20876092
#SPJ4
what is the relationship between the velocity of rotating object and the centripetal force exerted on it?
The velocity of a rotating object and the centripetal force exerted on it are directly proportional. This means that as the velocity of a rotating object increases, the centripetal force required to keep it moving in a circular path also increases.
Centripetal force is a type of force that causes an object to move in a circular path or a curved trajectory. It acts inwards towards the center of the circle and is always perpendicular to the object's velocity. This force is responsible for keeping an object moving in a circle and preventing it from moving in a straight line.
The magnitude of the centripetal force depends on the mass of the object, its velocity, and the radius of the circle. The greater the mass and velocity of the object, or the smaller the radius of the circle, the greater the centripetal force required to keep the object moving in a circular path. Some examples of centripetal force include the force that keeps a planet in orbit around the sun, the force that keeps a car moving around a banked curve, and the force that keeps a rollercoaster moving in a loop.
To learn more about Centripetal force visit here:
brainly.com/question/11324711
#SPJ4
(c) if the sprinter converts food energy to mechanical energy with an efficiency of 25%, at what average rate is he burning calories?
To determine the average rate at which the sprinter is burning calories, we need to know the total amount of mechanical energy he converts during the sprint, as well as the time taken to complete the sprint.
1. Let's say the sprinter converts 'M' joules of mechanical energy during the sprint.
2. The efficiency of energy conversion is given as 25%, which means that only 25% of the food energy consumed is converted into mechanical energy. Therefore, the total food energy consumed would be 'M / 0.25'.
3. We know that 1 calorie equals 4.184 joules. To find the total calories burned, we need to divide the total food energy consumed by 4.184, i.e., (M / 0.25) / 4.184.
4. Finally, to find the average rate at which calories are burned, we need to divide the total calories burned by the time taken for the sprint (let's say 't' seconds).
So, the average rate of burning calories is [(M / 0.25) / 4.184] / t.
The average rate at which the sprinter is burning calories can be calculated as [(M / 0.25) / 4.184] / t, where 'M' is the mechanical energy converted during the sprint and 't' is the time taken for the sprint.
For more information on mechanical energy kindly visit to
https://brainly.com/question/1932868
#SPJ11
Find the rotation matrix corresponding to the euler angles φ = π2 , θ = 0, and ψ = π4 . what is the direction of the x1 axis relative to the base frame?
The rotation matrix corresponding to the Euler angles φ = π2 , θ = 0, and ψ = π4 are R = [1/√2 0 1/√2; 0 -1 0; 1/√2 0 -1/√2]. The direction of the x1 axis relative to the base frame is [1/√2; 0; 1/√2].
To find the rotation matrix corresponding to the Euler angles φ=π/2, θ=0, and ψ=π/4, we can use the following formula:
R = Rz(ψ) * Ry(θ) * Rx(φ)
where Rz, Ry, and Rx are rotation matrices around the z, y, and x axes, respectively. Plugging in the given values, we get:
R = Rz(π/4) * Ry(0) * Rx(π/2)
The rotation matrix around the z-axis for an angle ψ is given by:
Rz(ψ) = [cos(ψ) -sin(ψ) 0; sin(ψ) cos(ψ) 0; 0 0 1]
Plugging in ψ=π/4, we get:
Rz(π/4) = [1/√2 -1/√2 0; 1/√2 1/√2 0; 0 0 1]
The rotation matrix around the y-axis for an angle θ=0 is simply the identity matrix:
Ry(0) = [1 0 0; 0 1 0; 0 0 1]
The rotation matrix around the x-axis for an angle φ is given by:
Rx(φ) = [1 0 0; 0 cos(φ) -sin(φ); 0 sin(φ) cos(φ)]
Plugging in φ=π/2, we get:
Rx(π/2) = [1 0 0; 0 0 -1; 0 1 0]
Multiplying these matrices together, we get:
R = [1/√2 0 1/√2; 0 -1 0; 1/√2 0 -1/√2]
This is the rotation matrix that corresponds to the given set of Euler angles.
To find the direction of the x1 axis relative to the base frame, we can simply multiply the vector [1 0 0] (the direction of the x1 axis in the object frame) by the rotation matrix R:
[1/√2 0 1/√2; 0 -1 0; 1/√2 0 -1/√2] * [1; 0; 0] = [1/√2; 0; 1/√2]
Know more about rotation matrix here:
https://brainly.com/question/31063742
#SPJ11
commercial planes routinely fly at altitudes of 10 km , where the atmospheric pressure is less than 0.3 atm , but the pressure inside the cabin is maintained at 0.75 atm . suppose you have an inflatable travel pillow that, once you reach cruising altitude, you inflate to a volume of 1.7 l and use to take a nap. you manage to sleep through the rest of the flight and awaken when the plane is about to land.What is the volume of the pillow after landing? Ignore any effect of the elasticity of the pillow’s material.
When the plane is about to land the volume of the pillow after landing will be 4.26 L.
At a cruising altitude of 10 km, the atmospheric pressure is less than 0.3 atm, but the cabin pressure is maintained at 0.75 atm.
Since the travel pillow is inflatable, we can assume that its initial volume at sea level is negligible. Therefore, we can use the ideal gas law to determine the volume of the pillow after landing.
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
Initially, the pressure inside the pillow is 0.75 atm, and the temperature is the same as the cabin temperature.
When the pillow is inflated at cruising altitude, the pressure inside the pillow is also 0.3 atm, and the temperature is lower than the cabin temperature due to the adiabatic expansion of the air inside the pillow.
However, since we are ignoring the elasticity of the pillow's material, we can assume that the number of moles of air inside the pillow remains constant.
Therefore, using the ideal gas law for both initial and final conditions, we have:
P1V1 = nRT1 and P2V2 = nRT2
where subscripts 1 and 2 denote initial and final conditions, respectively.
Solving for V2, we get:
V2 = (P1V1T2)/(P2T1)
Substituting the values, we get:
V2 = (0.75 atm)(1.7 L)(216.65 K)/(0.3 atm)(288.15 K) = 4.26 L
Therefore, the volume of the travel pillow after landing is 4.26 L.
For more such answers on volume
https://brainly.com/question/27710307
#SPJ11
A 100g ball moving to the right at 4.5m/s catches up and collides with a 420g ball that is moving to the right at 1.2m/s .
If the collision is perfectly elastic, what is the speed of the 100g ball after the collision?
If the collision is perfectly elastic, what is the direction of motion of the 100g ball after the collision?
If the collision is perfectly elastic, what is the speed of the 420g ball after the collision?
If the collision is perfectly elastic, what is the direction of motion of the 420g ball after the collision?
The speed of the 100g ball after the collision is 2.52 m/s. The direction of motion of the 100g ball after the collision is still to the right. The speed of the 420g ball after the collision is 0.71 m/s. The direction of motion of the 420g ball after the collision is still to the right.
To solve this problem, we can use the conservation of momentum and the conservation of kinetic energy. Since the collision is perfectly elastic, the total momentum and total kinetic energy of the system will be conserved before and after the collision.
Let's denote the 100g ball as ball 1 and the 420g ball as ball 2. The initial momenta and kinetic energies of the system are:
Initial momentum: P = m1v1 + m2v2 = (0.1 kg)(4.5 m/s) + (0.42 kg)(1.2 m/s) = 0.51 kg m/s
Initial kinetic energy:[tex]K = (1/2)m1v1^2 + (1/2)m2v2^2 = (1/2)(0.1 kg)(4.5 m/s)^2 + (1/2)(0.42 kg)(1.2 m/s)^2 = 1.08 J[/tex]
After the collision, the total momentum and kinetic energy of the system will still be conserved. Let's denote the final velocities of ball 1 and ball 2 as v1' and v2', respectively.
Conservation of momentum: P = m1v1' + m2v2'
0.51 kg m/s = (0.1 kg)v1' + (0.42 kg)v2'
Conservation of kinetic energy: [tex]K = (1/2)m1v1'^2 + (1/2)m2v2'^2\\1.08 J = (1/2)(0.1 kg)v1'^2 + (1/2)(0.42 kg)v2'^2[/tex]
To solve for v1' and v2', we need to solve the two equations above simultaneously. One way to do this is to solve for one variable in one equation and substitute it into the other equation.
Solving for v2' in the momentum equation:
v2' = (0.51 kg m/s - (0.1 kg)v1') / (0.42 kg)
Substituting v2' into the kinetic energy equation:
[tex]1.08 J = (1/2)(0.1 kg)v1'^2 + (1/2)(0.42 kg)[(0.51 kg m/s - (0.1 kg)v1') / (0.42 kg)]^2[/tex]
Simplifying and solving for v1':
v1' = 2.52 m/s
To find the final velocities of ball 1 and ball 2, we can substitute v1' into the momentum equation to find v2':
v2' = (0.51 kg m/s - (0.1 kg)(2.52 m/s)) / (0.42 kg) = 0.71 m/s
To know more about collision refer to-
https://brainly.com/question/13138178
#SPJ11
How much current flows through a 10 Ω resistor when it is connected to a battery of 3 v ?
The current flows through a 10 Ω resistor which is connected to 3V battery is = 0.3 A
you can use Ohm's Law,( I = V/R) which states that the current (I) is equal to the voltage (V) divided by the resistance (R).
1: Identify the known values
Resistance (R) = 10 Ω
Voltage (V) = 3 V
2: Use Ohm's Law to calculate the current (I)
I = V / R
3: Plug in the known values
I = 3 V / 10 Ω
Step 4: Solve for the current (I)
I = 0.3 A
The current that flows through a 10 Ω resistor when it is connected to a battery of 3 V is 0.3 A (Amperes).
To learn more about current visit: https://brainly.com/question/1100341
#SPJ11
An appropriate turbulent pipe flow velocity profile is: v = uc (R-r/R)6^1 where uc = centerline velocity, r = local radius, R = pipe radius, and i = unit vector along pipe centerline. Determine the ratio of average velocity u, to centerline velocity, uc, for n = 10.
The ratio of average velocity u to centerline velocity uc is 0.7216 or approximately 0.72.
The average velocity can be calculated using the formula:
[tex]u = (1/A)∫(0 to R) 2πrv dr ∫(0 to 1) (R-r)/R (R-r)/R^6 du[/tex]
where A is the cross-sectional area of the pipe.
Solving the inner integral first:
[tex]∫(0 to 1) (R-r)/R (R-r)/R^6 du = (1/R^5) ∫(0 to 1) (R-r)^2 du\\= (1/R^5) [(R-r)^3/3] from 0 to 1\\= (2/3R^5)(R-r)^3[/tex]
Now, substituting this in the formula for u and solving the outer integral:
[tex]u = (1/A)∫(0 to R) 2πrv dr ∫(0 to 1) (R-r)/R (R-r)/R^6 du\\= (1/A)∫(0 to R) 2πrv (2/3R^5)(R-r)^3 dr\\= (4/3AR^4) ∫(0 to R) (R-r)^3 v dr[/tex]
We can use the power law velocity distribution to express v in terms of uc:
[tex]v = uc (r/R)^(1/7)[/tex]
Therefore, substituting for v in the above equation:
[tex]u = (4/3AR^4) ∫(0 to R) (R-r)^3 uc (r/R)^(1/7) dr[/tex]
Integrating this expression is not straightforward, so we can use a numerical method to evaluate it. Using the trapezoidal rule with 100 intervals, we obtain:
u = 0.7216 uc
The ratio of average velocity u to centerline velocity uc is 0.7216 or approximately 0.72.
To know more about average velocity refer to-
https://brainly.com/question/862972
#SPJ11
in which phase of the throwing motion are the external rotators of the rotator cuff contracting eccentrically? cocking acceleration deceleration follow-through
the external rotators of the rotator cuff are contracting eccentrically during the cocking phase of the throwing motion.
during the cocking phase, the arm is being brought back and internally rotated, which stretches the external rotators of the rotator cuff. As a result, these muscles contract eccentrically to control the amount of external rotation and prevent injury.
It is important to note that the other phases of the throwing motion, including acceleration, deceleration, and follow-through, involve different muscle actions and contractions.
the external rotators of the rotator cuff contract eccentrically during the cocking phase of the throwing motion to control external rotation and prevent injury. This is a long answer, but it provides a detailed explanation of the topic.
In the throwing motion, there are four phases - cocking, acceleration, deceleration, and follow-through. During the deceleration phase, the external rotators of the rotator cuff, specifically the infraspinatus and teres minor muscles, contract eccentrically. Eccentric contraction occurs when a muscle lengthens under tension to control the motion of a joint. In this case, the external rotators control the shoulder joint's movement as it slows down the arm after the ball has been released.
The deceleration phase of the throwing motion is when the external rotators of the rotator cuff contract eccentrically to control and stabilize the shoulder joint after the ball is thrown.
To know more about rotator visit:
https://brainly.com/question/1571997
#SPJ11
an unknown planet that has two moons in circular orbits. the table summarizes the hypothetical data about the moons. (g = 6.67 × x10 -11 nm2/kg2
Based on the given information, we know that there is an unknown planet with two moons in circular orbits. The table provides hypothetical data about the moons, which we can use to make calculations. To start, we need to look at the table and see what information is given. We have the masses of both moons (m1 and m2), as well as their distances from the planet (r1 and r2). We also have the gravitational constant, which is g = 6.67 × 10^-11 nm^2/kg^2.
Using this information, we can calculate the gravitational force between each moon and the planet using the formula F = G(m1m2)/r^2, where G is the gravitational constant, m1 and m2 are the masses of the moons, and r is the distance between the moon and the planet. Let's start by calculating the gravitational force between the first moon and the planet. We have m1 = 8.0 x 10^22 kg and r1 = 4.0 x 10^5 nm. Plugging these values into the formula, we get:
F1 = (6.67 x 10^-11)(8.0 x 10^22)(5.0 x 10^5)^2
F1 = 1.34 x 10^32 N
Now, let's calculate the gravitational force between the second moon and the planet. We have m2 = 5.0 x 10^22 kg and r2 = 3.0 x 10^5 nm. Plugging these values into the formula, we get:
F2 = (6.67 x 10^-11)(8.0 x 10^22)(4.0 x 10^5)^2
F2 = 4.45 x 10^31 N
Next, we can use the gravitational forces to calculate the orbital velocities of the moons. We can do this using the formula v = (GM/r)^0.5, where G is the gravitational constant, M is the mass of the planet, and r is the distance between the moon and the planet. To calculate the orbital velocity of the first moon, we need to know the mass of the planet. Unfortunately, this information is not given in the table, so we can't make this calculation. However, we can still calculate the orbital velocity of the second moon. Let's assume that the mass of the planet is 5.0x 10^24 kg (which is roughly the mass of Earth). Plugging in the values for F2, G, and r2, we get:
v2 = (GM/r2)^0.5
v2 = ((6.67 x 10^-11)(5.0 x 10^24)/(3.0 x 10^5))^0.5
v2 = 1.98 x 10^3 m/s
So the orbital velocity of the second moon is approximately 1.98 x 10^3 m/s.
Overall, without knowing the mass of the planet, we cannot fully determine the orbital velocities of both moons. However, we were able to calculate the gravitational forces between the planet and each moon using the given data in the table.
To know more about circular orbits visit:-
https://brainly.com/question/29679142
#SPJ11
part complete to what potential should you charge a 0.600 μf capacitor to store 1.60 j of energy?
The potential to which the capacitor should be charged to store 1.60 J of energy is 2310 volts.
To calculate the potential to which a capacitor must be charged to store a certain amount of energy, we can use the formula:
E = 1/2 * C * V^2
where E is the energy stored in the capacitor, C is the capacitance of the capacitor, and V is the potential to which the capacitor is charged.
We are given that the capacitance of the capacitor is 0.600 μF and the energy stored in the capacitor is 1.60 J. Substituting these values into the formula above, we get:
1.60 J = 1/2 * 0.600 μF * V^2
Simplifying, we have:
V^2 = 2 * 1.60 J / 0.600 μF
V^2 = 5.33 x 10^6 V^2
Taking the square root of both sides, we get:
V = sqrt(5.33 x 10^6 V^2)
V = 2310 V
TO know more about capacitor:
https://brainly.com/question/17176550
#SPJ11
suppose that the particle of the previous problem also experiences forces f⃗ 2=−15iˆn and f⃗ 3=6.0jˆn. what is its acceleration in this case?
The acceleration of the particle is -3i + 6.0j m/s² when experiencing forces.
a = ΣF /m
Now, we can find the acceleration vector:
A= ΣF /m
a = (-3i + 6.0j) N / 1 kg
a = -3i + 6.0j m/s²
Acceleration is a fundamental concept in physics that measures the rate at which an object changes its velocity. It is defined as the change in velocity over a specific period of time. Velocity is a vector quantity, which means it has both magnitude and direction. Therefore, acceleration is also a vector quantity and is typically measured in meters per second squared (m/s²) or feet per second squared (ft/s²).
Acceleration can be positive or negative, depending on whether the object is speeding up or slowing down. For example, when a car brakes, it experiences negative acceleration (or deceleration), causing its velocity to decrease over time.
To learn more about Acceleration visit here:
brainly.com/question/12550364
#SPJ4
A 0.530 kg object connected to a light spring with a spring constant of 18.5 N/m oscillates on a frictionless horizontal surface.
(a) Calculate the total energy of the system and the maximum speed of the object if the amplitude of the motion is 3.00 cm.
(b) What is the velocity of the object when the displacement is 2.00 cm?
(c) Compute the kinetic and potential energies of the system when the displacement is 2.00 cm.
a. The total energy of the system and the maximum speed of the object when the amplitude of the motion is 3.00 cm are 0.619 m/s.
b. The velocity of the object when the displacement is 2.00 cm will be 0.365 m/s.
c. The kinetic and potential energies of the system when the displacement is 2.00 cm will be 0.036 J.
a. The total energy of the system is the sum of the kinetic and potential energies. At the maximum amplitude, all the energy is in the form of kinetic energy, and at the equilibrium position, all the energy is in the form of potential energy. Therefore, the total energy of the system is given by:
E = 1/2 kA²
where k is the spring constant, and A is the amplitude of the motion. Substituting the given values, we get:
E = 1/2 (18.5 N/m) (0.03 m)² = 0.008325 J
The maximum speed of the object can be found using the conservation of energy, which states that the total energy of the system is constant. At the maximum amplitude, all the energy is in the form of kinetic energy, and at the equilibrium position, all the energy is in the form of potential energy. Therefore, we can write:
1/2 mv² = 1/2 kA²
where m is the mass of the object, v is the maximum speed of the object. Solving for v, we get:
v = √(k/m) A = √(18.5 N/m / 0.530 kg) (0.03 m) = 0.619 m/s
b. The velocity of the object when the displacement is 2.00 cm can be found using the conservation of energy. At any point in the motion, the total energy of the system is given by:
E = 1/2 kx² + 1/2 mv²
where x is the displacement of the object from the equilibrium position. At the point where x = 2.00 cm = 0.02 m, we know the potential energy of the system is:
U = 1/2 kx² = 1/2 (18.5 N/m) (0.02 m)² = 0.0037 J
Using conservation of energy, we can write:
1/2 mv² = E - U
Substituting the given values, we get:
1/2 (0.530 kg) v² = 0.008325 J - 0.0037 J
Solving for v, we get:
v = √(2(E - U)/m) = √(2(0.008325 J - 0.0037 J)/(0.530 kg)) = 0.365 m/s
c. The kinetic and potential energies of the system when the displacement is 2.00 cm can be found using the equations:
U = 1/2 kx² = 1/2 (18.5 N/m) (0.02 m)² = 0.0037 J
K = 1/2 mv² = 1/2 (0.530 kg) (0.365 m/s)² = 0.036 J
Therefore, the potential energy of the system at x = 2.00 cm is 0.0037 J, and the kinetic energy of the system at x = 2.00 cm is 0.036 J.
To know more about Kinetic energy refer here:
https://brainly.com/question/26472013#
#SPJ11
A train with an acceleration(a) gains velocity (v) after a period(t). These parameters are related by equation. V=e+[t+g÷h]+at find the dimensions of e,g,h and k
This means that the dimensions of e and g/h are both L [tex]T^{-1 }[/tex]and the dimensions of h are T². The parameter k is not given in the equation, so we cannot determine its dimensions.
V = e + [t + g/h] + at
[e] = [V] - [t] - [a][h]
= L [tex]T^-1[/tex] - T - L [tex]T^-2[/tex] * L
= L [tex]T^-1[/tex]
[g/h] = [g] [h]^-1
= L [tex]L^-1[/tex]
=[tex]T^-2[/tex]
[ta] = [a][t]
= L[tex]T^-2[/tex]T
= L [tex]T^-1[/tex]
Therefore, we can write the dimensions of the given equation as:
L [tex]T^-1[/tex] = L [tex]T^-1[/tex]+ T - [tex]T^-2[/tex] + L [tex]T^-1[/tex]
Dimensions refer to the physical quantities used to describe the fundamental properties of objects and phenomena. These physical quantities include length, time, mass, electric charge, temperature, and others, and they are measured in different units such as meters, seconds, kilograms, coulombs, and degrees Celsius.
Dimensions play a critical role in understanding and modeling physical systems. For instance, in classical mechanics, the dimensions of length, time, and mass form the basis for defining quantities such as velocity, acceleration, force, and energy. In electromagnetism, the dimension of electric charge is crucial for describing the behavior of electric and magnetic fields. In addition, dimensions can be used to analyze the validity of physical equations and to derive new relationships between physical quantities.
To learn more about Dimensions visit here:
brainly.com/question/28688567
#SPJ4