what is civic engagement and what are your tips on water scarcity

Answer:

HCl

Explanation:

The substance is HCl as reference table G shows HCl becomes less soluble as the temperature increases from 10 C to 80 C.

The cross-sectional area of the solenoid is approximately 2.84 × 10\-4 m\2. To find the cross-sectional area of the solenoid, we need to follow these steps:

1. Calculate the total number of turns in the solenoid.
2. Determine the inductance of the solenoid.
3. Calculate the cross-sectional area using the formula for the inductance of a solenoid.

Step 1: Calculate the total number of turns in the solenoid.
Total turns (N) = turns per meter (n) * length (L)
N = 450 turns/m * 1.8 m
N = 810 turns

Step 2: Determine the inductance of the solenoid.
The energy stored in the solenoid (W) can be calculated using the formula:
W = 0.5 * L * I\2
where L is the inductance and I is the current.

Rearrange the formula to find the inductance:
L = 2 * W / I^2
L = 2 * 0.39 J / (12 A)\2
L = 0.078 H (henry)

Step 3: Calculate the cross-sectional area using the formula for the inductance of a solenoid.
The inductance of a solenoid can be calculated using the formula:
L = μ₀ * N\2 * A / L
where μ₀ is the permeability of free space (4π × 10\-7 T·m/A), A is the cross-sectional area, and L is the length.

Rearrange the formula to find the cross-sectional area:
A = L * L / (μ₀ * N\2)
A = 0.078 H * 1.8 m / (4π × 10\-7 T·m/A * (810 turns)\2)
A ≈ 2.84 × 10\-4 m^2

The cross-sectional area of the solenoid is approximately 2.84 × 10\-4 m\2.

Know more about solenoids

https://brainly.com/question/1873362

#SPJ11

a. Due to the non-polar nature of CO2 molecules, London dispersion forces are the only intermolecular forces that may interact with them.

b. Due to the presence of a nitrogen atom with a single pair of electrons, NH3 molecules are polar and are capable of both hydrogen bonding and dipole-dipole interactions.

c. Due to their polar nature, HCl molecules are capable of both hydrogen bonding and dipole-dipole interactions.

d. Since C6H6 (benzene) molecules are non-polar, London dispersion forces are the only intermolecular forces that can act between them.

Retinase. Vitamins don't help to raise how many calories or how much energy the human body needs.

Dietary supplements that contain vitamin A are often preformed vitamin A in the form of retinyl acetate or retinyl palmitate, provitamin A in the form of beta-carotene, or a combination of preformed and provitamin A.

Preformed vitamin A (retinol, retinyl esters) and provitamin A carotenoids like alpha- and beta-carotene that are converted to retinol are the two main forms of vitamin A in the human diet. Animal products, fortified meals, and vitamin supplements are sources of preformed vitamin A.

To know more about Vitamins visit:-

brainly.com/question/10840252

#SPJ1

The molar mass of calcium carbonate (CaCO₃) is approximately 100.09 g/mol. The gram is commonly used to measure the mass of small objects, such as food items, coins, and jewelry.

A gram is a unit of mass in the metric system, abbreviated as  It is defined as one-thousandth of a kilogram, which is the base unit of mass in the International System of Units (SI).

It is also used in scientific measurements, such as in chemistry and physics, to express the mass of atoms, molecules, and other particles.

To calculate the mass of 9.50 moles of calcium carbonate, we can use the following formula:

mass = moles x molar mass

Substituting the given values, we get:

mass = 9.50 moles x 100.09 g/mol

mass = 950.45 g

Therefore, 9.50 moles of calcium carbonate would have a mass of approximately 950.45 grams.

To know more about mass visit :

brainly.com/question/12127497

#SPJ1

The volume of air inside a 40.0 L tire under 218 kPa of pressure that would occupy at 101.3 kPa pressure is 86.1 L.

To calculate the volume of air inside a 40.0 L tire under 218 kPa of pressure that would occupy at 101.3 kPa pressure, we can use the following formula, known as Boyle's law:

P₁V₁ = P₂V₂

where P₁ is the initial pressure, V₁ is the initial volume, P₂ is the final pressure, and V₂ is the final volume.

In this case, we know:

P₁ = 218 kPa

V₁ = 40.0 L

P₂ = 101.3 kPa

V₂ = ?

Now we can rearrange the formula to solve for V₂:

V₂ = (P₁ x V₁) / P₂

Substituting the values, we get:

V₂ = (218 kPa x 40.0 L) / 101.3 kPa

= 86.1 L

To know more about volume here

https://brainly.com/question/1578538

#SPJ4

Answer:

First, I will give you a brief summary of what heterotrophs and autotrophs are:

Autotrophs are known as producers because they are able to make their own food from raw materials and energy. Examples include plants, algae, and some types of bacteria. Heterotrophs are known as consumers because they consume producers or other consumers. Dogs, birds, fish, and humans are all examples of heterotrophs.

Now, to get to the question.

The first option, which is the image of trees and grass will go into the autotroph box. This is because plants make food for themselves.

The second option, which is the image of the tiger, will go in the heterotroph box. This is because tigers eat foods like deer and wild boar, and those are heterotrophs.

The third option, which is the image of the deer, belongs in the heterotroph box. deers eat plants to survive, which are autotrophs, meaning that a deer is a heterotroph.

The fourth option, which is the image of some algae, belongs in the autotroph box. As I explained before, all algae are autotrophs.

The fifth option, which is the image of a human, belongs in the heterotroph box. Humans can't produce any food by themselves, so that makes them a heterotroph.

Finally, the last option, which is the image of some carrots, belongs in the autotroph box. Carrots provide their own food for themselves.

I hope this could help you! A brainilist is highly appreciated and helpful!

Triglycerides are formed by a process called esterification, in which fatty acids react with glycerol to form a molecule of triglyceride and three molecules of water. This process is catalyzed by enzymes known as lipases.

The chemical equation for the esterification of one molecule of glycerol with three molecules of fatty acid is as follows:

3 Fatty Acids + Glycerol → Triglyceride + 3 Water molecules

In this reaction, each of the three fatty acid molecules undergoes a condensation reaction with one of the hydroxyl (-OH) groups of the glycerol molecule.

This results in the formation of an ester bond between the fatty acid and the glycerol, and the release of one molecule of water. The reaction is repeated three times, resulting in the formation of a triglyceride molecule.

Triglycerides are a type of lipid that are stored in adipose tissue and serve as a source of energy for the body. They can be broken down by enzymes called lipases to release fatty acids and glycerol, which can then be used as a source of energy by the body.

To know more about Triglycerides here

https://brainly.com/question/5096426

#SPJ4

Based on the definition of a mineral, being a naturally occurring solid, formed by inorganic processes, with a characteristic crystal structure and a specific chemical composition, materials that will be classified as minerals are those that meet the given criteria.

A mineral is a naturally occurring, solid, crystalline substance that is inorganic in nature and has a distinct chemical composition. Minerals are typically formed by geological processes that occur over a long period of time. Minerals are composed of atoms and molecules that are arranged in a regular, three-dimensional pattern, known as a crystal structure. Because minerals are formed under specific conditions, they have distinct physical and chemical properties.

There are numerous minerals in the earth's crust, and they can be identified based on their physical and chemical properties. Mineralogists study minerals and their properties in order to better understand the earth's composition and history.

Mineral resources are commonly used for industrial purposes such as construction, fuel, and electronics.

Learn more about minerals on:

https://brainly.com/question/15844293

#SPJ11

The three possible reasons why erosion rates may have dropped during the time period given are more likely due to Conservation practices, Land-use changes and Technological advances.

Here are three possible reasons why erosion rates may have dropped during the time period given:

1. Conservation practices: There has been increased adoption of conservation practices on agricultural lands, such as conservation tillage, cover cropping, and terracing, which reduce soil erosion rates.

These practices help to conserve soil moisture, promote soil health, and minimize soil disturbance, all of which help to reduce erosion rates.

2. Land-use changes: Land-use changes may have led to a reduction in erosion rates. For example, the conversion of marginal cropland to permanent vegetation cover, such as grassland or forest, can significantly reduce erosion rates.

Additionally, the reduction in tillage practices for crop production and the use of perennial crops with deeper roots can help to stabilize soils and reduce erosion rates.

3. Technological advances: Technological advances in soil conservation practices, such as the development of precision agriculture and real-time weather monitoring, have also contributed to the reduction in erosion rates.

These advances enable farmers to tailor their agricultural practices to site-specific conditions, thereby minimizing soil erosion rates.

For example, precision agriculture technologies can be used to optimize fertilizer and pesticide applications, reducing soil disturbance and runoff, while real-time weather monitoring allows farmers to adjust their practices in response to changing weather conditions.

For more question on erosion click on

https://brainly.com/question/27714548

#SPJ11

The mass of 2.00 moles of Ca(OH)₂ is 148.2 g.

A mole is a unit of measurement used in chemistry to represent particles, such as atoms, molecules, or ions. A mole is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are in 12 grams of pure carbon-12.

Moles and mass are directly proportional to each other since they both represent the quantity of substance.

Moles = Mass/Molar mass

Mass = Moles x Molar mass

The molar mass of Ca(OH)₂ is calculated as follows:

Molar mass of Ca = 40.1 g/mol

Molar mass of O = 16.0 g/mol

Molar mass of H = 1.0 g/mol2 atoms of oxygen, 2 atoms of hydrogen, and 1 atom of calcium are present in Ca(OH)₂.

Therefore, the molar mass of Ca(OH)₂ = 40.1 g/mol + 2(16.0 g/mol) + 2(1.0 g/mol) = 74.1 g/mol

The mass of 2.00 moles of Ca(OH)₂ = Moles × Molar mass= 2.00 × 74.1= 148.2 g

Hence, 148.2 g is the mass of 2.00 moles of Ca(OH)₂.

Learn more about moles on:

https://brainly.com/question/29367909

#SPJ11

14.2g of [tex]P_4O_{10}[/tex] will be made by the chemist when a chemical uses 8.00 grams of oxygen in an excess of phosphorus.

Given the white incandescent light is produced during a firework show

The reaction is as follows:[tex]P + O_2 - > P_4O_{10[/tex]

After balancing the equation we get:[tex]4P + 5O_2 -- > P_4O_{10[/tex]

The mass of oxygen used = 8g

From the reaction we can see that 5 moles of Oxygen ([tex]O_2[/tex]) react with phosphorous to form 1 mole of [tex]P_4O_{10[/tex].

Mass of oxygen used initially = moles x molar mass of [tex]O_2[/tex] = 5 * 32 = 160g

mass of [tex]P_4O_{10[/tex] used = 1 mole x 284g/mole = 284g

for 160g of oxygen 284g of [tex]P_4O_{10[/tex] is produced.

Then for 8g of oxygen = 8 * 284/160 = 14.2g of [tex]P_4O_{10[/tex] is obtained.

To learn more about oxygen click here https://brainly.com/question/2272415

#SPJ1

The activation energy for the isomerization of methyl isocyanide is 198 kJ/mol.

Isomerization is a chemical reaction in which a molecule undergoes a structural rearrangement without being broken down into smaller molecules. The activation energy is the energy that must be supplied to a chemical reaction to begin. It is a measure of the reaction's difficulty to begin.

Methyl isocyanide is a chemical compound that is a colorless gas with a powerful odor. It is a linear molecule with the chemical formula CH₃NC. This compound is of interest because of its unusual reactivity and its ability to form a stable complex with transition metals in coordination chemistry.

In the case of methyl isocyanide, the reaction pathway involves the rearrangement of a single bond from C-N to N-C. The energy required for this transformation, including the necessary breaking and formation of bonds, is known as the activation energy. It is this energy barrier that must be overcome for the reaction to proceed.

Thus, the activation energy of the isomerization of methyl isocyanide is 198 kJ/mol. This is a relatively high energy requirement, indicating that the reaction is unlikely to occur under normal conditions without additional energy input.

To know more about isocyanide refer here:

https://brainly.com/question/30826771#

#SPJ11

Magma is molten rock that exists beneath the Earth's surface, primarily in the mantle layer. The movement of magma within the mantle is driven by several factors, including heat, pressure, and gravity.

The mantle is a layer of the Earth's interior that extends from the bottom of the crust to the top of the core, and it is composed of solid rock. However, within the mantle, there are regions of the rock that are partially melted, forming magma. This magma is less dense than the surrounding solid rock and tends to rise towards the Earth's surface.

The movement of magma within the mantle is influenced by convection currents, which are caused by the heat generated by the Earth's core. These convection currents cause magma to rise towards the Earth's surface, where it may form volcanoes or other types of volcanic activity.

Additionally, the movement of tectonic plates can also play a role in the movement of magma within the mantle. As plates move apart, magma can rise up to fill the space between them, leading to the formation of new crust.

Overall, the movement of magma within the mantle is a complex process that is influenced by a variety of factors, including heat, pressure, gravity, and the movement of tectonic plates.

The three hydrogen atoms in an [tex]NH_{3}[/tex] hybridization will be centred around the nitrogen atom. Only the s orbitals of the hydrogen atoms overlap those sp3 orbitals.

An sp3 orbital in N crosses over with a s orbital in H to form the N-H bond. The second option is the proper response. This is because the nitrogen atom in [tex]NH_{3}[/tex] has four electron domains that together create four sp3 orbitals.

An sp3 orbital in N crosses a s orbital in H to form the N-H bond.

Tetrahedral in shape, the nitrogen atom in [tex]NH_{3}[/tex] contains four hybridised sp3 orbitals that house its four valence electrons. A hydrogen atom's valence electron is situated in a s orbital. The N-H bond is produced when the sp3 hybrid orbital of a nitrogen atom and the s orbital of a hydrogen atom overlap.

This overlap is due to the covalent bond that is created when nitrogen and hydrogen share electrons. Accurate orbital overlap that leads to the formation of the N-H bond in [tex]NH_{3}[/tex]

To know more about nitrogen atom, click the below link

brainly.com/question/2396742

#SPJ4

A. The number of moles of water that were absorbed is 0.094 mole

B. The percentage of water in the hydrate is 25.4%

The number of mole water absorbed can be obtain as follow:

Mole = mass / molar mass

Mole of water = 1.70 / 18

Mole of water = 0.094 mole

We can obtain the percentage of water as follow:

Percentage of water = (mass of of water / mass of hydrate) × 100

Percentage of water = (1.7 / 6.7) × 100

Percentage of water = 25.4%

Learn more about mole:

https://brainly.com/question/13314627

#SPJ1

The resulting solution will contain 0.18 mL of MNO2 and be 0.01% in concentration.

To solve this problem, let's first set up the equation:
6 mL * 3% H2O2 = X mL * Y% MNO2
Next, let's solve for X and Y:
X = 6 mL * 3% = 0.18 mL
Y = 0.18 mL / 6 mL * 3% = 0.01%
Now that we have X and Y, we can answer the question.
Given 6 mL of 3% H2O2 in a clean test tube, add a tiny amount of MNO2 to the test tube and loosely stopper the tube. After 15-20 seconds, hold the tube at 45 degrees. The resulting solution will contain 0.18 mL of MNO2 and be 0.01% in concentration.

Know more about equations

https://brainly.com/question/17145398

#SPJ11

The partial pressures of each gas in the mixture are: 0.325 atm for CH4, 0.263 atm for C2H6, and 0.412 atm for C3H8.

To calculate the partial pressure of each gas, we need to first find the total moles of gas in the mixture. The total moles can be calculated by adding up the moles of each gas:

Total moles = 0.31 mol CH₄ + 0.25 mol C2H₆ + 0.29 mol C3H₈ = 0.85 mol

Next, we can calculate the mole fractions of each gas:

Mole fraction of CH₄ = 0.31 mol / 0.85 mol = 0.365

Mole fraction of C2H₆ = 0.25 mol / 0.85 mol = 0.294

Mole fraction of C₃H₈ = 0.29 mol / 0.85 mol = 0.341

Finally, we can calculate the partial pressures of each gas by multiplying the mole fraction by the total pressure:

Partial pressure of CH₄ = 0.365 x 1.50 atm = 0.325 atm

Partial pressure of C₂H₆ = 0.294 x 1.50 atm = 0.263 atm

Partial pressure of C₃H₈ = 0.341 x 1.50 atm = 0.412 atm

Therefore, the partial pressures of each gas in the mixture are: 0.325 atm for CH₄, 0.263 atm for C2H₆, and 0.412 atm for C₃H₈.

To know more about partial pressure, refer here:

https://brainly.com/question/31214700#

#SPJ11

The mass of sodium acetate (CH₃COONa) required to prepare 50.0 ml of a 0.10 m sodium acetate solution is 0.41g.

0.10 M aqueous solution of sodium acetate means that 1000 mL of a solution containing 0.10 moles of sodium acetate.

1 ml of solution = 0.10moles

∴No. of moles of sodium acetate in 50mL

= (0.10/1000)×50

= 0.005

Number of moles is calculated as

=Mass given/ Molecular mass

The molar mass of sodium acetate = 82.03g/mol

∴Mass of sodium acetate acquired

=no of moles of sodium acetate × molar mass of sodium acetate

= 0.005 mol ×82.03 g/mol

= 0.41 g

To know more about no of moles here

https://brainly.com/question/10053179

#SPJ4

The mass of eicosadienoic acid, in grams, in thisorchid sample is 0.0084 grams.

In this particular question, we are asked for the mass of eicosadienoic acid, in grams, in a 12-gram sample of an orchid plant based on an estimate that 0.07% (percent by mass), of the sample consists of this fatty acid. To solve this problem, we can use a simple proportion:

0.07/100 = x/12

where x is the mass of eicosadienoic acid, in grams, in the 12-gram sample. To solve for x, we can cross-multiply and simplify:

0.07 × 12 = 100 × x

0.84 = 100x

x = 0.0084 grams

Therefore, the mass of eicosadienoic acid in the 12-gram sample of the orchid plant is 0.0084 grams.

Learn more about percent by mass here: https://brainly.com/question/26150306

#SPJ11

Answer:

16.1 g

Explanation:

We want to find how many grams of NO₂ can be produced from 15.0 g of NO and 5.60 g of O₂ according to the balanced chemical equation:

[tex]\sf 2 NO + O_2\;\; \longrightarrow \;\;2NO_2[/tex]

First, convert the given masses of both reactants, NO and O₂, to moles using their respective relative formula masses [tex]\sf(M_r)[/tex].

Relative formula masses:

Therefore:

[tex]\sf moles\;of\;NO=\dfrac{mass\;(g)}{M_r}=\dfrac{15.0}{30.01}=0.500[/tex]

[tex]\sf moles\;of\;O_2=\dfrac{mass\;(g)}{M_r}=\dfrac{5.60}{31.999}=0.175[/tex]

Now look at the ratio of the reactants:

2 mol NO : 1 mol O₂ = 0.5 mol NO : 0.25 mol O₂

There are only 0.175 moles of O₂ (instead of 0.25 moles), so the O₂ will run out first. It is the limiting reactant.

Use the moles of the limiting reactant to calculate the mass of the product, remembering to use the molar ratio between the limiting reactant and the product.

Limiting reactant : product = 1 mol O₂ : 2 mol NO₂

Therefore, 0.175 mol O₂ will make 0.35 mol NO₂.

Finally, convert the moles of NO₂ to grams:

[tex]\begin{aligned}\sf Mass\;of\; NO_2 &= \sf moles \times M_r \\&= \sf 0.35 \times 46.0055\\ &= \sf 16.1\; g\end{aligned}[/tex]

The pH of the solution after the addition of 30.0 ml of 0.27 M NaOH in titration is 1.43.

To find the pH of a solution, we use the formula given below:

pH = -log [H+]

where [H+] denotes the concentration of H+ ions (hydrogen ions).

This formula is based on the fact that pH is a measure of the acidity or basicity of a solution. It is the negative logarithm of the hydrogen ion concentration.

Therefore, the pH scale ranges from 0 to 14. The pH scale ranges from 0 to 14, with 7 representing neutral. pH < 7 is acidic, while pH > 7 is basic (alkaline).

Steps to find the pH of the solution

Step 1: Calculate the number of moles of HCl present in the given solution:

moles of HCl = Molarity × volume (in liters)

= 0.18 mol/L × 0.1000 L

= 0.018 mol

Step 2: Calculate the number of moles of NaOH added to the solution:

moles of NaOH = Molarity × volume (in liters)

= 0.27 mol/L × 0.0300 L

= 0.0081 mol

Step 3: Calculate the total number of moles of NaOH after it has been added to the solution:

moles of NaOH = 0.0081 mol + excess NaOH (due to the reaction with HCl)

Step 4: Calculate the number of moles of HCl that reacted with NaOH:

moles of HCl reacted with NaOH = 0.0081 mol (since NaOH and HCl react in a 1:1 ratio)

Step 5: Calculate the number of moles of HCl remaining after the reaction:

moles of HCl remaining = 0.018 mol - 0.0081 mol = 0.0099 mol

Step 6: Calculate the concentration of H+ ions in the solution:

[H+] = moles of H+ / volume (in liters)

= 0.0099 mol / 0.1000 L

= 0.099 mol/L

Step 7: Calculate the pH of the solution:

pH = -log [H+] = -log (0.099) = 1.043

Note: The final pH should be corrected for the dilution of the solution due to the addition of NaOH.

Therefore, pH would be 1.43.

To know more about titration, refer here:

https://brainly.com/question/2728613#

#SPJ11

Answer:

2. Chemical tests to distinguish between unlabelled samples of the following solutions and their expected observations are:

a) Sodium sulfate and calcium nitrate: Add dilute hydrochloric acid to the unknown solution. Calcium nitrate will produce a white precipitate while sodium sulfate will not produce any precipitate.

b) Sodium sulfate and sodium nitrate: Add silver nitrate solution to the unknown solution. Sodium nitrate will produce a white precipitate of silver chloride while sodium sulfate will not react.

c) Strontium nitrate and strontium hydroxide: Add dilute hydrochloric acid to the unknown solution. Strontium hydroxide will produce a white precipitate while strontium nitrate will not produce any precipitate.

d) Barium chloride and lithium chloride: Add a few drops of dilute sulfuric acid to the unknown solution, followed by a few drops of a solution of potassium dichromate. Barium chloride will produce a green color while lithium chloride will not show any color.

3. Compound A giving a lilac flame test color and producing a white precipitate when added to a solution of barium chloride indicates the presence of potassium ion (K+). Therefore, compound A is most likely potassium chloride (KCl).

The theoretical yield of NH₄NO₃  in grams is 49.03 g (rounded to two decimal places).

nitrogen gas:

Convert the volume of nitrogen gas to moles using the ideal gas law: PV = nRT.

P = 1 atm (standard pressure), V = 16608 L, T = 20°C + 273.15 = 293.15 K, R = 0.08206 L·atm/mol·K

n = PV/RT = (1 atm)(16608 L)/(0.08206 L·atm/mol·K)(293.15 K) = 693.8 moles

Use the balanced chemical equation to determine the amount of product formed by nitrogen gas: 2 moles of N2 react to form 2 moles of NH₄NO₃ .

So, 693.8 moles of N2 would form 693.8/2 = 346.9 moles of NH₄NO₃ .

oxygen gas:

Convert the volume of oxygen gas to moles using the ideal gas law: PV = nRT.

P = 1 atm (standard pressure), V = 7.2123 L, T = 20°C + 273.15 = 293.15 K, R = 0.08206 L·atm/mol·K

n = PV/RT = (1 atm)(7.2123 L)/(0.08206 L·atm/mol·K)(293.15 K) = 0.3069 moles

Use the balanced chemical equation to determine the amount of product formed by oxygen gas: 1 mole of O2 reacts to form 2 moles of NH₄NO₃ .

So, 0.3069 moles of O2 would form 0.3069 x 2 = 0.6138 moles of NH₄NO₃ .

water:

Convert the volume of water to mass using its density:

Mass = Volume x Density = 7.2310 L x 1.00 kg/L x 1000 g/kg = 7231 g

Use the balanced chemical equation to determine the amount of product formed by water: 4 moles of H₂O react to form 2 moles of NH₄NO₃ .

So, 7231 g of H2O would form (2/4) x (7231 g/18.015 g/mol) = 201.2 moles of NH₄NO₃ .

Since oxygen gas forms the least amount of product, it is the limiting reactant. Therefore, we will use the amount of NH₄NO₃  formed by oxygen gas to calculate the theoretical yield.

The molar mass of NH₄NO₃  is 80.0434 g/mol.

The amount of NH₄NO₃  formed by oxygen gas is 0.6138 moles.

Therefore, the theoretical yield of NH₄NO₃  is (0.6138 mol) x (80.0434 g/mol) = 49.03 g.

The theoretical yield of NH₄NO₃ in grams is 49.03 g (rounded to two decimal places).

learn more about moles here

https://brainly.com/question/29367909

#SPJ1

Examples of negative tropism would be:

Negative tropism is the growth or movement of a plant away from a stimulus, such as light or gravity.

In the case of the examples given, the plant's leaves growing away from the sunlight is an example of negative phototropism, while the plant's roots growing down into the soil is an example of negative geotropism.

Thus, the two examples of negative tropism are:

More on negative tropism can be found here: https://brainly.com/question/22044063

#SPJ1

It is true that the slope of titration curve near equivalence point is steep.

The slope of the titration curve near the equivalence point is steep because there is a rapid change in pH with the addition of small amount of titrant. At the equivalence point, all the analyte has reacted with titrant, and the solution contains only salt and water. Any further addition of titrant causes a rapid increase in pH . The steepness of slope depends on the strength of acid and base involved, as well as their concentrations.

The point at which chemically equivalent quantities of reactants have been mixed is known as equivalence point of a chemical reaction .

To know more about equivalence point, refer

https://brainly.com/question/2496608

#SPJ1

The key absorbance indicative of starting material 2-methyl cyclohexanone that should be absent is the carbonyl stretch at around [tex]1710-1735 cm^{-1}.[/tex] , the bond type is C=O and the functional group is Ketone.

Infrared spectroscopy is a useful technique in identifying functional groups in organic compounds. The carbonyl stretch, which is typically found at 1710-1735 cm^-1, is a characteristic absorption band for ketones and aldehydes. Since 2-methyl cyclohexanone is a ketone, it should exhibit this absorption band in its infrared spectrum.

However, if this band is absent in the spectrum, it suggests that the compound has undergone a chemical reaction and the carbonyl functional group has been transformed into a different functional group. The absence of the carbonyl stretch at around 1710-1735 cm⁻¹ is indicative of the absence of the starting material, 2-methyl cyclohexanone.

This peak is characteristic of the C=O bond stretch in a ketone functional group. In 2-methyl cyclohexanone, this bond is present in the starting material but absent in the product after the reaction.

The bond type and functional group of this key absorbance are:

Bond type: C=O bond

Functional group: Ketone (C=O group attached to two alkyl or aryl groups)

By observing the absence of this peak in the IR spectrum of the product, we can confirm that the reaction has taken place and the starting material has been consumed. This technique is commonly used in organic chemistry to monitor the progress of reactions and determine the identity of products.

To know more about Infrared spectroscopy, refer here:

https://brainly.com/question/13265448#

#SPJ11

The buffer solution made by second student is more resistant to changes in pH when a strong acid or a strong base is added.

Generally buffer solution is defined as a water solvent based solution that consists of a mixture which contains a weak acid and also the conjugate base of the weak acid, or a weak base and also the conjugate acid of the weak base. Basically buffer solution are capable of resisting a change in pH upon dilution or upon the addition of small amounts of acid/alkali to them.

Here, the concentration of the second student is 10 times higher than the first student and due to this it has a greater capacity to neutralize acids and bases.

Learn more about buffer solution from the link given below.

https://brainly.com/question/24262133

#SPJ4

The volume of the 2.498 M H2SO4 solution containing 245 g of H2SO4 is 1L.

To find the volume of the 2.498 M H2SO4 solution containing 245 g of H2SO4, follow these steps:

1. Determine the molar mass of H2SO4. From the Periodic Table of Elements, the molar masses of H, S, and O are approximately 1 g/mol, 32 g/mol, and 16 g/mol, respectively.

So, the molar mass of H2SO4 = (2 x 1) + 32 + (4 x 16) = 2 + 32 + 64 = 98 g/mol.

2. Calculate the moles of H2SO4 in the solution.

Moles = mass/molar mass = 245 g / 98 g/mol = 2.5 mol.

3. Determine the volume of the solution using the molarity formula.

Molarity (M) = moles/volume (L).

Rearrange the formula to solve for the volume: volume (L) = moles/M = 2.5 mol / 2.498 M = 1 L.

The volume of the 2.498 M H2SO4 solution containing 245 g of H2SO4 is 1 liter.

To know more about molar mass calculation, visit: https://brainly.com/question/22997914

#SPJ11