What is a single letter, number, symbol, or punctuation mark known as?

Python program that reads a list of scores from the user and assigns grades based on the scheme you provided:
scores = input("Enter a list of scores separated by spaces: ")
scores_list = scores.split()
for score in scores_list:
   score = int(score)
   if score >= 90:
       print("A")
   elif score >= 80:
       print("B")
   elif score >= 70:
       print("C")
   elif score >= 60:
       print("D")
   else:
       print("F")

This program first prompts the user to enter a list of scores separated by spaces. It then splits the input string into a list of individual scores. The program then iterates over each score in the list, converts it to an integer using `int()`, and checks which grade range it falls into using a series of `if-elif-else` statements. If the score is greater than or equal to 90, the program assigns an "A" grade. If the score is between 80 and 89, the program assigns a "B" grade, and so on.
Finally, the program prints out the grade for each score in the list. Note that this program assumes that the user will only enter valid integer scores, and does not include any error handling for invalid input.

To learn more about Python; https://brainly.com/question/28675211

#SPJ11

If an uneven load on a wire is never balanced, it can lead to a variety of potential problems and risks. One of the most common consequences of uneven loading is the buildup of stress and tension in the wire, which can cause it to become overstretched and potentially snap or break.

When a wire is subjected to uneven loading, such as when a heavier weight is placed on one side of the wire than the other, the tension in the wire becomes unbalanced. This can cause the wire to become stretched beyond its normal limits, which can lead to deformation, fatigue, and ultimately failure. If the wire is not balanced, it may also be more susceptible to external factors such as wind, vibration, and temperature changes, which can exacerbate the stress and strain on the wire.

In addition to the risk of wire failure, uneven loading can also lead to other safety hazards. For example, if the wire is used to support a structure or equipment, an imbalance in the load can cause the structure to become unstable or the equipment to malfunction. This can result in property damage, injuries, and even loss of life.

To prevent these types of issues, it is important to ensure that loads are evenly distributed on wires and other support structures. This can be achieved through the use of proper rigging techniques, such as the use of equalizer bars or spreader bars, and by carefully monitoring loads to ensure that they are balanced at all times. By taking these precautions, the risk of wire failure and other safety hazards can be minimized.

To learn more about Wire loading, visit:

https://brainly.com/question/25922783

#SPJ11

The task of spelling out 8.2.5 in codehs can be achieved using the basic programming constructs of variables and print statements. Firstly, a variable can be created and assigned the value of 8.2.5. For example, we can declare a variable called "version" and set it equal to 8.2.5 using the syntax "version = 8.2.5".

Next, we need to output the value of this variable in a user-friendly format. This can be done using the print statement. We can simply use the syntax "print(version)" to display the value of the "version" variable.

Therefore, the complete code for spelling out 8.2.5 in codehs would be:

```
version = 8.2.5
print(version)
```

This code creates a variable called "version" and sets its value to 8.2.5. Then, it uses the print statement to output the value of this variable to the console.

In conclusion, spelling out 8.2.5 in codehs can be easily achieved by using variables and print statements. By following the steps outlined above, anyone can write a simple program to spell out this number in codehs.

For such more question on variable

https://brainly.com/question/29883906

#SPJ11

The previous two exercises can be done using the Formula property by entering a formula in cell N4 and copying it down, and proceeding similarly in row 14.

When using the Formula property, you can enter a formula in a single cell and then use the Copy method to copy it down to other cells in the same column or row.

This allows you to quickly and easily apply the same formula to multiple cells without the need for loops or other programming constructs.

To use the Formula property for the exercises, simply enter the appropriate formulas in cells N4 and N14, and then use the Copy method to fill in the formulas in the rest of the cells in the same rows. This will give the desired results for both exercises.

Overall, the Formula property is a powerful tool for working with formulas in Excel and can help simplify and streamline the process of applying formulas to multiple cells.

For more questions like Property click the link below:

https://brainly.com/question/29528698

#SPJ11

Answer: The answer you are looking for is a network.

Explanation: Let’s see why. A router is a device that directs incoming and out coming net traffic to the next appropriate routing point.
A personal computer is a personal computing device that enables you to interact with and use programs or applications in the digital world.

A network is when several computers are connected using a specific type of infrastructure so that they can share resources, “talk” and see each other.

A server is a computing unit which use is to provide resources a client might ask for. An example of that is you using your computer (client) and open a site in the browser, here the site’s server is sending the sites data to your browser so you can see it.
Hope that makes it a bit clearer.

A group of computers that share resources is called a network. A network allows computers to communicate with one another and share resources like files, printers, and internet connections. In a network, various devices such as routers, personal computers, servers, and other peripherals can play essential roles.

A router is a device that helps connect multiple computers in a network, directing traffic and ensuring data reaches the correct destination. Personal computers are individual devices used by people for a wide range of tasks, and they can connect to a network to access shared resources. A server is a powerful computer that stores and manages data, applications, and services used by the network's connected devices.

In summary, a network is a term used to describe a group of computers that share resources, while routers, personal computers, and servers are components of the network that play different roles in facilitating communication and resource sharing.

You can learn more about the network at: brainly.com/question/15088389

#SPJ11

To help you determine the minimum cost of the following queries in terms of I/Os, assuming you have any number of secondary (alternative-2) indexes available on single key attributes.

Query

A)

Query: select count(*) from employees where name = 'John Smith';

- Create a secondary index on the "name" attribute.
- Perform an index search to find all records with the name 'John Smith'.
- Perform a count(*) operation on the retrieved records.

Minimum cost: 2 I/Os (1 for the index search, 1 for the count operation)

B)

Query: select avg(salary) from employees where name = 'John Smith';

- Create a secondary index on the "name" attribute.
- Perform an index search to find all records with the name 'John Smith'.
- Retrieve the salary attribute from each record.
- Calculate the average salary.

Minimum cost: 3 I/Os (1 for the index search, 1 for the salary retrieval, 1 for the average calculation)

C)

Query: select count(*) from employees where birthdate < '1-1-1980 00:00';

- Create a secondary index on the "birthdate" attribute.
- Perform an index search to find all records with a birthdate < '1-1-1980 00:00'.
- Perform a count(*) operation on the retrieved records.

Minimum cost: 2 I/Os (1 for the index search, 1 for the count operation)

To know more about single key attributes visit:

https://brainly.com/question/29023958

#SPJ11

Using the VBA editor, he can find every instance of "VerticalAlignment" and change the text after the equal sign from "xlBottom" to "xlTop." This will efficiently update the macro to top-align the cells instead of bottom-aligning them. The correct option is A.

The VBA editor allows users to edit and modify recorded macros. In this case, Elias can use the editor to locate every instance of the "VerticalAlignment" setting in his recorded macro and change it to "xlTop" to align the cells to the top. This is more efficient than re-recording the macro as it saves time and ensures that all necessary changes are made.

Overall, option A is the most efficient way for Elias to fix his macro as it allows him to quickly update the necessary setting and ensure that his macro performs the desired function.

To know more about VBA editor visit:

https://brainly.com/question/29670993

#SPJ11

Answer:

folders.

Explanation:

To calculate the average of all the numbers stored in the "numbers.txt" file, you can use a loop to read the file and store the integers in a list. Then, you can use another loop to calculate the sum of all the integers in the list. Finally, divide the sum by the total number of integers in the list to get the average. Here's some sample code in Python:

code implementation:

```
# Open the file and read the integers into a list
with open("numbers.txt") as f:
   numbers = [int(line.strip()) for line in f]

# Calculate the sum of all the integers in the list
total = 0
for num in numbers:
   total += num

# Calculate the average
average = total / len(numbers)

# Print the result
print("The average of the numbers in the file is:", average)
```

In this code, the `with open("numbers.txt") as f:` statement opens the file and creates a file object `f` that we can use to read the file. The `numbers = [int(line.strip()) for line in f]` line uses a list comprehension to read each line of the file, strip any whitespace characters, and convert the resulting string to an integer using the `int()` function. This creates a list of integers called `numbers`.

The `for num in numbers:` loop then iterates over the `numbers` list and adds each integer to the `total` variable. Finally, we divide the `total` by the length of the `numbers` list using the `len()` function to get the average, which is stored in the `average` variable.

We then print the result using the `print()` function, which displays the message "The average of the numbers in the file is:" followed by the value of the `average` variable.

To know more about Python visit:

https://brainly.com/question/31055701

#SPJ11

Object-oriented processes involve creating a design using classes, objects, and inheritance. These steps include analysis, design, implementation, and testing.

1. Analysis: This step involves understanding the problem and identifying the required objects and their relationships. It includes gathering requirements, defining the scope, and specifying the system's functionalities.

2. Design: In this phase, you create a detailed plan for building the software. This involves defining classes, objects, methods, and properties, as well as the relationships between these elements, such as inheritance and composition.

3. Implementation: Here, you translate the design into actual code using an object-oriented programming language like Java, C++, or Python. This step involves creating the classes, defining the methods and properties, and establishing the relationships among objects as per the design.

4. Testing: In this phase, you ensure the software works as expected by performing various tests, including unit testing, integration testing, and system testing. Testing helps identify and fix any bugs or issues in the code, ensuring the final product meets the requirements and functions correctly.

5. Maintenance: After the software is deployed, you may need to make updates or fix issues that arise. This step involves ongoing support, such as bug fixes, enhancements, and documentation updates, to ensure the software continues to meet its objectives and remains functional over time.

Know more about the object-oriented programming click here:

https://brainly.com/question/3522354

#SPJ11

In this scenario, since you have corrected the IP address in the A resource record, the DNS configuration may not have propagated to the secondary server (dns2) yet.

To ensure that the correct DNS information is available, you should follow these steps:

After completing these steps, try connecting to the web server again from your workstation. The correct DNS information should be available now, and you should be able to connect to the web server.

For more question on DNS click on

https://brainly.com/question/27960126

#SPJ11

The first step to organizing frequently used commands in groups on a new tab on the ribbon is to add a new tab to the ribbon. This can be done by right-clicking on the ribbon and selecting "Customize the Ribbon" from the drop-down menu. In the dialog box that appears, click on the "New Tab" button to create a new tab.

1)Once the new tab has been created, the next step is to create a group on the tab. This can be done by selecting the new tab and clicking on the "New Group" button in the same dialog box. Give the group a name that reflects the commands that will be added to it.

2)After the group has been created, the next step is to add commands to it. This can be done by selecting the group and clicking on the "Add" button in the same dialog box. Select the command that you want to add from the list of available commands and click on "OK".

3)Repeat the process of adding commands to the group until all of the frequently used commands have been added. Once all of the commands have been added, click on "OK" to close the dialog box and save the changes.

4)In conclusion, the first step to organizing frequently used commands in groups on a new tab on the ribbon is to add a new tab to the ribbon. From there, a group can be created on the new tab, commands can be added to the group, and the group can be customized to suit your needs.

For such more question on frequently

https://brainly.com/question/28776010

#SPJ11

Python program that satisfies the given tasks:

# ask user for their address

address = input("What is your address? ")

# print length of address

print(f"Your address is {len(address)} characters long.")

# print fifth character of address

print(f"The fifth character of your address is {address[4]}.")

# check if "main" is in address

if "main" in address:

   print("True")

else:

   print("False")

# print address three times

print(address * 3)

When you run this program, it will ask the user for their address and store the input in the address variable. It will then print the length of the address using string interpolation with the len() function. The fifth character of the address is printed using indexing with the string's subscript notation. It checks whether the word "main" is present in the address using the in operator and prints either "True" or "False" accordingly. Finally, the program prints the address three times by multiplying it with the integer 3.

Learn more about string; https://brainly.com/question/30392694

#SPJ11

The CIDR subnet starting address for Orlando, given the information provided, would be 192.100.0.0/16. This means that the company has been assigned a Class B network address with a subnet mask of 255.255.0.0. This address range can support up to 65,534 hosts, which is more than enough for the 2000 hosts in Orlando.

CIDR notation is used to describe the size of a network and is represented by a combination of the network's IP address and the number of significant bits in the subnet mask. In this case, the first 16 bits of the subnet mask are "1", indicating that they are part of the network address. The remaining 16 bits are "0", indicating that they are available for host addresses.

Overall, this CIDR subnet starting address will allow the company to efficiently manage its network resources in Orlando and allocate IP addresses to its hosts in a structured and organized way. It will also help ensure that network traffic flows smoothly and that security and performance are optimized.

You can learn more about subnets at: brainly.com/question/31828825

#SPJ11

Given the information supplied, the CIDR subnet beginning address for Orlando would be 192.100.0.0/16.

This indicates the firm has a Class B network address with a subnet mask of 255.255.0.0. This address range can accommodate up to 65,534 hosts, more than adequate for Orlando's 2000 hosts.

The size of a network is described using CIDR notation, which is represented by a combination of the network's IP address and the number of significant bits in the subnet mask.

The first 16 bits of the subnet mask are "1" in this example, indicating that they are part of the network address. The remaining 16 bits are set to "0," indicating that they can be used for host addresses.

Learn more about Subnet at:

https://brainly.com/question/28256854

#SPJ4

To create a new rule for handling meeting responses in Outlook 2016, follow these steps:

1. Open Outlook and click on "File."
2. Click on "Manage Rules & Alerts."

Explanation:1. Launch Outlook 2016 and navigate to the "File" tab on the top-left corner of the window.
2. From the "File"menu , select "Manage Rules & Alerts" to open the "Rules and Alerts" dialog box.
3. In the "Rules and Alerts" dialog box, click on the "E-mail Rules" tab, then click on the "New Rule" button to start creating a new rule.
4. Select "Apply rule on messages I receive" under "Start from a blank rule" and click "Next."
5. In the "Select condition(s)" window, scroll down and check the box for "uses the form name form." Click on the "form name" link in the lower pane to open the "Choose Forms" dialog box.
6. In the "Choose Forms" dialog box, select "Application Forms" from the "Look in" dropdown menu. Scroll through the list to find "Accept Meeting Response" and "Decline Meeting Response" forms. Select each form while holding down the "Ctrl" key and click "Add" to add them to the "Selected Forms" list. Click "Close."
7. Click "Next" to proceed to the "Select action(s)" window. Choose the desired action to apply to meeting responses, such as "move it to the specified folder." Click the "specified" link in the lower pane to choose a folder and click "OK."
8. Click "Next" again to set any exceptions if needed, then click "Next" once more to reach the "Finish rule setup" window.
9. Give your rule a descriptive name, ensure the "Turn on this rule" checkbox is ticked, and click "Finish."
10. Click "Apply" and "OK" to save and apply the new rule for handling meeting responses in Outlook 2016.

Know more about the window click here:

https://brainly.com/question/13502522

#SPJ11

Adaptability within a species can only occur if there is genetic variation among individuals.

Genetic variation is the presence of different genes within individuals of a species, which can lead to differences in traits, such as size, color, or behavior. This variation allows a species to adapt to changing environments because some individuals with specific traits may be more likely to survive and reproduce under certain conditions. Over time, the frequency of those advantageous traits will increase in the population, leading to the species' overall adaptability.

In summary, genetic variation is essential for adaptability within a species. It provides the necessary diversity of traits that allows a population to respond to environmental changes, increases the chances of survival and reproductive success of individuals, and contributes to the overall health and resilience of the species.

Learn more about Genetic variation visit:

https://brainly.com/question/1619951

#SPJ11

To obtain an angle of view that matches Ross's natural sight perception, a lens with the same focal length as the human eye is recommended.

The accepted norm for this is 50mm in full-frame equivalent, which renders a standard or normal lens.

A prime lens or kit lens with a similar focal length, approximately 50mm, is well-suited when aiming to achieve a realistic perspective in accordance with human eyesight.

This choice will lead to capturing images that appear very much like those objects and scenes viewed by Ross with his own eyes.

Read more about lens here:

https://brainly.com/question/28039799

#SPJ1

The statement is false because while both processes and threads can be used to implement concurrency, they are not the same.

Processes are separate instances of a program that run independently, while threads are lighter-weight and share the same memory space as their parent process.

While threads can be more efficient in certain situations, such as when multiple parts of a program need to access shared data, processes are better suited for situations where the different parts of the program are independent and do not need to communicate as closely.

Ultimately, the choice between using processes or threads will depend on the specific requirements of the program being developed.

Learn more about concurrency https://brainly.com/question/7165324

#SPJ11

Answer:

a keyboard. you use it every time you type text.

Explanation:

A keyboard is a device used to input text and commands into a computer or other device. It is a common peripheral device for desktop and laptop computers and is used extensively for word processing, internet browsing, and other tasks that require text input.

To determine the range of addresses that will be forwarded to next hops d, b, and c, we need to look at the network address and subnet mask for each row in the routing table.

The range of addresses can be calculated by performing a bitwise AND operation between the subnet mask and the destination address, then adding the network address.

For next hop d:

Network address: 10.0.0.0

Subnet mask: 255.255.0.0

Range of addresses: 10.0.0.0 - 10.0.255.255

For next hop b:

Network address: 172.16.0.0

Subnet mask: 255.255.0.0

Range of addresses: 172.16.0.0 - 172.16.255.255

For next hop c:

Network address: 192.168.1.0

Subnet mask: 255.255.255.0

Range of addresses: 192.168.1.0 - 192.168.1.255

If an incoming packet has a destination address of 18.0.225.0, the next hop for this packet would be default, as there is no matching entry in the routing table for this destination address. The default route specifies that any packets with a destination address not found in the routing table should be sent to the next hop specified in the default route.

Learn more about router at:

https://brainly.com/question/29869351

#SPJ1

As of now, the exact number of Waddle Dees in "Kirby and the Forgotten Land" is not specified since the game has not been released yet.

Waddle Dees are common characters in the Kirby series, serving as both friends and enemies

. In this upcoming game, we can expect to encounter various Waddle Dees throughout Kirby's adventure.

Once the game is released, we will have a better understanding of the number of Waddle Dees present in "Kirby and the Forgotten Land." Stay tuned for more information when the game becomes available.

Learn more about Kirby series at

https://brainly.com/question/15043670

#SPJ11

it is always a good idea to check the spelling by reading a document even if you have used the writer's spell check feature. Doing so will help you catch any mistakes that may have been missed and ensure that the document is clear, concise, and professional.

Explanation:

While a writer's spell check feature is a useful tool for catching misspellings, it is not foolproof and may not catch all errors. Reading through a document after using the spell check feature allows you to catch any mistakes that may have been missed by the feature or any words that may have been spelled correctly but used incorrectly in the context of the sentence. Additionally, manually reviewing a document for spelling errors shows attention to detail and professionalism, which can enhance the overall impression of the written work.

However, this assumption can be dangerous, as the spell check feature is not perfect and can miss certain errors. For example, it may not catch homophones, which are words that sound the same but are spelled differently, such as "there" and "their."

Furthermore, the spell check feature may suggest incorrect corrections that do not fit the context of the sentence. For example, it may suggest changing "too" to "to" when "too" was the intended word. This can result in errors that may make the document appear unprofessional or confusing.

Reading through a document after using the spell check feature allows you to catch any mistakes that may have been missed by the feature. It also enables you to identify words that may have been spelled correctly but used incorrectly in the context of the sentence. For instance, "their" and "there" are both valid words but using the wrong one can change the meaning of a sentence.

In addition to catching errors, manually reviewing a document for spelling errors shows attention to detail and professionalism, which can enhance the overall impression of the written work. It also ensures that the document is error-free and easy to read, which is essential when communicating important information.

In summary, while a writer's spell check feature is a helpful tool, it is not foolproof, and it is always a good idea to manually review a document for spelling errors. Doing so will help you catch any mistakes that may have been missed and ensure that the document is clear, concise, and professional.

Know more about the spell check feature click here:

https://brainly.com/question/30150221

#SPJ11

In a CSMA/CA protocol with RTS/CTS enabled, the sender can start transmitting an RTS message after a propagation delay of a one-time slot, the transmission delay of the RTS message, and the DIFS, multiplied by two. The earliest potential periods for the receiver to begin transmitting a CTS message and an acknowledgment packet may be found by taking into consideration the propagation delay, transmission delay, SIFS, and time necessary to receive the RTS message and data packet, respectively.

A. The earliest possible time for the sender to start sending an RTS message would be after a propagation delay of a one-time slot (since it has already waited for two slots), plus the transmission delay of the RTS message, plus the DIFS. Therefore, the earliest time for the sender to start sending the RTS message would be (1 * time slot) + (transmission delay of RTS) + DIFS.

B. The earliest time for the receiver to start sending a CTS message would be the time at which it receives the RTS message, plus the propagation delay of the packet from the sender to the receiver, plus the transmission delay of the CTS message, plus the SIFS. Therefore, the earliest time for the receiver to start sending the CTS message would be (propagation delay) + (transmission delay of CTS) + (time to receive RTS message) + SIFS.

C. The earliest time for the receiver to start sending an acknowledgment packet would be the time at which it receives the data packet, plus the propagation delay of the packet from the sender to the receiver, plus the transmission delay of the acknowledgment packet, plus the SIFS. Therefore, the earliest time for the receiver to start sending the acknowledgment packet would be (propagation delay) + (transmission delay of acknowledgment packet) + (time to receive data packet) + SIFS.

To learn more about Data transmission, visit:

https://brainly.com/question/24373056

#SPJ11

Explanation:

learning and teaching and research and reading

3 goals to improve your technology skill throughout work are to enhance proficiency in a specific software or tool, expand the technology, and work towards efficiency.

1. Goal 1: Enhance proficiency in a specific software or tool - This goal involves dedicating time to learning the ins and outs of a particular software or technology that is relevant to your job. This may include attending workshops, taking online courses, or practicing on your own.

2. Goal 2: Expand knowledge in a new area of technology - To broaden your technology skill set, aim to explore a new area within technology that interests you. This could involve researching new trends, attending webinars or conferences, or participating in online forums.

3. Goal 3: Apply learned technology skills to improve work efficiency - Once you've gained new skills and knowledge, focus on incorporating them into your daily tasks to improve productivity and efficiency at work. This may include optimizing processes, automating tasks, or enhancing communication with colleagues.

By working towards these 3 goals, you can effectively improve your technology skill throughout your work.

To know more about  software visit:

https://brainly.com/question/26324021

#SPJ11

Estonia and Georgia are the two former Soviet republics that suffered cyber-attacks from Russia in 2007 and 2008, respectively.

In 2007, Estonia experienced a series of cyber-attacks targeting government, financial, and media websites, which were widely attributed to Russia. These attacks followed political tensions between the two countries over the relocation of a Soviet-era war memorial in Estonia's capital, Tallinn. The cyber-attacks, which involved Distributed Denial of Service (DDoS) and defacement of websites, disrupted essential services and had a significant impact on the country's digital infrastructure.

Similarly, in 2008, Georgia was targeted by cyber-attacks during its military conflict with Russia over the separatist regions of South Ossetia and Abkhazia. The attacks primarily targeted Georgian government websites, making it difficult for the government to communicate with citizens and the international community. The methods used in these attacks also included DDoS and website defacement. Some experts linked the cyber attacks to Russian hackers and government agencies, though concrete evidence was never officially presented.

Both incidents highlighted the vulnerabilities of national digital infrastructures and the potential for cyber warfare to be used as a tactic in international disputes. As a result, Estonia and Georgia have since invested in strengthening their cyber defense capabilities and have played an active role in promoting international cooperation on cyber security issues.

Know more about the cyber-attacks click here:

https://brainly.com/question/22255103

#SPJ11

One day you dash into the library to check your email. Before you can log in your phone chimes and you see a text message from your email provider. The text message contains a code for two-factor authentication. Two-factor authentication is widely used to protect sensitive information and prevent unauthorized access to online accounts.

Two-factor authentication is a security measure that requires two forms of identification before granting access to an account or service. The first factor is typically a password, and the second factor can be something like a code sent to a phone number or email address, a fingerprint, or a security key. By requiring two factors of authentication, the security of the account is increased because an attacker would need to have access to both factors in order to gain unauthorized access.

To learn more about authentication; https://brainly.com/question/13615355

#SPJ11

Most applications will ask you to provide all of the following information except (d) which of your previous jobs you didn't like. The correct option is D.

Job applications typically require information such as your availability to start work, your preferred work schedule, and your desired salary or wage, as these are relevant to the employer's needs and decision-making process. However, they do not generally ask for personal opinions or preferences about previous jobs, as this is not relevant to the current application.

When filling out job applications, focus on providing the necessary information, such as your availability and desired compensation, and avoid discussing any negative experiences with previous jobs. The correct option is D.

To know more about decision-making process visit:

https://brainly.com/question/29772020

#SPJ11

Kiara is doing a'report on corrections in the United States. She finds it interesting that part of the subculture that forms in prison includes prison argot. The term Prison Argot refers to the unique vocabular used by prisoners.

Prison lingo is a colloquialism used mostly by criminals and inmates in correctional facilities. It is an example of anti-language. Many of the terminology are related to criminal activity, incarceration, court proceedings, street life, and various sorts of inmates. Prison jargon differs by institution, area, and nation.

Prison argot, often known as prison slang or prison jargon, is a language established inside the confines of correctional facilities. It is a specialized language comprised of terms and phrases specific to prison culture that are frequently used to describe various elements of life behind bars.

Learn more about prison argot at:

https://brainly.com/question/2663000

#SPJ1

Answer:

a unique vocabulary used by prisoners

Explanation:

I did it js trust me i got it wrong but now i got it right on my first attempt i got yall its b

Answer:

Yes, the microcomputer can be considered a gift of the 4th generation. During this time, computer technology advanced significantly, leading to the development of smaller, faster, and more affordable microcomputers than ever before. The 4th generation also saw the introduction of the first personal computers, which revolutionized how people work and communicate. Today, microcomputers are an integral part of our daily lives, and they continue to evolve and improve with each passing year.

Explanation:

Yes, Greg has violated the professional code of conduct.

Downloading e-books that are not related to work during working hours is regarded as misconduct and also considered a breach of company policy.

Such behavior can cause a loss in productivity and ultimately waste valuable company resources. Therefore, it is imperative for employees to abide by the professional code of conduct and company policies in order to maintain a positive workplace environment focused on ethical and responsible behavior.

Find out more on violations of conduct at https://brainly.com/question/31000678

#SPJ4