Charges need to be transferred from one plate to the other to generate a charge on a capacitor's plates. Electrons are usually moved from one plate to the other by attaching the plates to a power source, such as a battery.
The plate attached to the negative terminal of the battery becomes negatively charged and the plate connected to the positive terminal of the battery becomes positively charged when the power source is connected.
Until the potential difference between the plates equals the potential difference between the battery connections, electrons move from the negative plate to the positive plate. The flow of electrons stops at this moment, and the capacitor is fully charged.
In an electric field that is created between the plates of a capacitor, the charges on the plates are retained. The potential differential between the plates is produced by this electric field and is inversely proportional to the charge on the plates and their separation from one another.
learn more about capacitors here
https://brainly.com/question/21851402
#SPJ1
Since moving charges create magnetic fields and magnetic fields exert forces on moving charges, devices that are used to measure field strengths often affect the system they are being used to measure. Consider the wire segment in the figure, which is used to measure the magnetic field by determining the foree exerted on the current flowing through it. I2 a 50%. Estimate the field the loop creates by calculating the field strength, in teslas, at the center of a circular loop 20.0 cm in diameter carrying 45 A D A 50%
The magnetic field at the center of the loop is approximately 3.56 × 10^-5 T.
To calculate the magnetic field at the center of a circular loop, we can use the formula,
B = (μ0 / 4π) * (2I / R)
where B is the magnetic field at the center of the loop, I is the current flowing through the loop, R is the radius of the loop, and μ0 is the permeability of free space.
In this case, the loop has a diameter of 20.0 cm, so its radius is R = 10.0 cm = 0.10 m. The current flowing through the loop is I = 0.50 * 45 A = 22.5 A (since I2 is 50% of I1, and I1 is 45 A).
The permeability of free space is μ0 = 4π × 10^-7 T·m/A.
Plugging these values into the formula,
B = (μ0 / 4π) * (2I / R)
= (4π × 10^-7 T·m/A / 4π) * (2 × 22.5 A / 0.10 m)
= 3.56 × 10^-5 T
To know more about magnetic field, here
brainly.com/question/23096032
#SPJ4
a 550-kg dragster accelerates from rest to a final speed of 120 m/s in 450 m and encounters an average frictional force of 1200 n. what is its average power output in kilowatts if this takes 7.30 s?
The average power output is 7.72 kW
When referring to energy delivery, the term "power output" is used. When used in reference to the automotive sector, it refers to the quantity of mechanical energy output produced by the motor, once again within a predetermined interval.
As a 550 kg dragster accelerates from rest to a final speed of 120 m/s in 450 m, facing an average frictional force of 1200 N, and doing so in 7.30 seconds, its average power output is 7.72 kW..
This can be calculated using the equation Power = (Force x Distance) / Time. In this case, the Force is 1200 N, the Distance is 450 m, and the Time is 7.30 seconds. Plugging these values into the equation, we get:
Power = (1200 N x 450 m) / 7.30 s
Power = 7,720 / 7.30 s
Power = 7.72 kW.
Learn more about "power" at: https://brainly.com/question/24995930
#SPJ11
A crane does work at the rate of 2.5 x10^3 watts to lift a 200-newton weight vertically for duration of 8.0 seconds. Calculate the height the crane lifts the weight over this time period.
The height the crane lifts the weight over the time period of 8.0s is 100m when it does work at the rate of [tex]2.5 *10^3[/tex] watts to lift a 200-newton weight.
Given the rate of work done by crane (P) = [tex]2.5 * 10^3[/tex]watts
The force exerted to lift a weight (F) = 200N
The duration of which weight was lifted (t) = 8.0s
Let the height the crane lifts the weight during this period = h
Also power is calculated as work done per unit time such that: P = W/t
[tex]2.5 * 10^3 = W/8.0s[/tex]
[tex]W = 2*10^4[/tex]
We know that work done on any object = force x distance moved
Work: W = F * d
W = F * h where d = distance = h
[tex]h = 2 * 10^4/200 = 100m[/tex]
Hence the height the crane lifts the weight over this time period is 100m
To learn more about work click here https://brainly.com/question/30640810
#SPJ1
A dental X-ray typically affects 225 g of tissue and delivers about 4.25 HJ of energy using X-rays that have wavelengths of 0.0245 nm. What IS the energy in electron volts of a single photon of these X-rays? energy of a photon: How many photons are absorbed during the dental X-ray? number of photons absorbed: photons
a) Energy of a photon (in eV) ≈ 5.06 × 10³ eV
b) 0 Total energy delivered = 4.25 HJ = 4.25 × 10⁹ J
c) Photons absorbed during the dental X-ray is approximately 5.25 × 10²⁴ photons.
Let's discuss it further below.
To determine the energy of a single photon of the X-rays in electron volts, we can use the following formula:
Energy of a photon (in eV) = (hc) / (λ * e)
where h is Planck's constant (6.63 × 10⁻³⁴ Js), c is the speed of light (3 × 10⁸ m/s), λ is the wavelength (0.0245 nm = 2.45 × 10⁻¹¹ m), and e is the elementary charge (1.6 × 10⁻¹⁹ C).
Step 1: Calculate the energy of a photon in Joules:
Energy of a photon (in J) = (6.63 × 10⁻³⁴ Js) × (3 × 10⁸ m/s) / (2.45 × 10⁻¹¹ m)
Energy of a photon (in J) ≈ 8.1 × 10⁻¹⁶ J
Step 2: Convert the energy from Joules to electron volts:
Energy of a photon (in eV) = (8.1 × 10⁻¹⁶ J) / (1.6 × 10⁻¹⁹ C)
Energy of a photon (in eV) ≈ 5.06 × 10³ eV
To find the number of photons absorbed during the dental X-ray, we can use the following formula:
Number of photons absorbed = Total energy delivered / Energy of a single photon
Step 3: Convert the energy delivered to Joules:
Total energy delivered = 4.25 HJ = 4.25 × 10⁹ J
Step 4: Calculate the number of photons absorbed:
Number of photons absorbed = (4.25 × 10⁹ J) / (8.1 × 10⁻¹⁶ J/photon)
Number of photons absorbed ≈ 5.25 × 10²⁴ photons
In summary, the energy of a single photon of these X-rays is approximately 5.06 × 10³ eV, and the number of photons absorbed during the dental X-ray is approximately 5.25 × 10²⁴ photons.
Learn more about electron volts.
brainly.com/question/29650228
#SPJ11
a certain star has a (b-v) color index of 0.55 and a b magnitude of 5.09. how many times brighter is this star when measured using a v filter than when using a b filter?
The star is 1.61 times brighter when measured using a V filter than when using a B filter.
We need to use the formula for magnitude difference:
[tex]m2 - m1 = -2.5 log (F2/F1)[/tex]
where m1 and m2 are the magnitudes measured through filters 1 and 2, respectively, and F1 and F2 are the fluxes measured through filters 1 and 2, respectively.
We know that the (B-V) color index of the star is 0.55, which means its V magnitude can be found by subtracting this value from its B magnitude:
[tex]V = B - (B-V) = 5.09 - 0.55 = 4.54[/tex]
Now, we can use the formula to find the magnitude difference between the B and V filters:
[tex]m2 - m1 = -2.5 log (F2/F1)\\\4.54 - 5.09 = -2.5 log (F2/F1)\\\0.55 = 2.5 log (F2/F1)\\\log (F2/F1) = 0.22\\\F2/F1 = 1.61[/tex]
Therefore, the star is 1.61 times brighter when measured using a V filter than when using a B filter.
To know more about magnitude difference, here
brainly.com/question/14922050
#SPJ4
monochromatic light of wavelength 600 nm is incident on a slit with a width of 6 micrometers. what is the angular width of the central peak?
The angular width of the central peak when monochromatic light of wavelength 600 nm is incident on a slit with a width of 6 micrometers is 0.1 radian.
The angular width is the angle between the two points at which the intensity of the light has dropped to 1/2 the maximum value. This angle is known as the full width at half maximum (FWHM).
The angular width of the central peak for a monochromatic light of wavelength 600 nm incident on a slit with a width of 6 micrometers can be calculated using the equation:
θ = (λ/a)
where λ is the wavelength of the incident monochromatic light and a is the width of the slit.
Therefore, the angular width of the central peak of a diffraction grating with monochromatic light of wavelength 600 nm and a slit width of 6 micrometers can be calculated as follows:
θ = λ/a
θ = 600 x 10⁻⁹ / 6 x 10⁻⁶
θ = 100 x 10⁻³ radians
θ = 0.1 radian
Therefore, the angular width of the central peak is 0.1 radian.
To know more about angular width, refer here:
https://brainly.com/question/28202134#
#SPJ11
what is the magnetic force exerted on a 2.35m length of wire carrying a current of 0.819a perpendicular to the magnetic field of 0.920 t?
The magnetic force exerted on a 2.35m length of wire carrying a current of 0.819A perpendicular to the magnetic field of 0.920 T is 1.807 N.
What is magnetic force?The magnetic force is the force that acts between two magnets or between a magnet and a magnetic material. When a moving charge is exposed to a magnetic field, it experiences a magnetic force. The direction of the magnetic force is perpendicular to both the magnetic field and the direction of the motion of the charged particle.
The magnetic force is given by:
F = BILsin(θ)
where,
F is the magnetic force
B is the magnetic field
I is the current
L is the length of the wire
θ is the angle between the current and the magnetic field.
The length of the wire (L) is 2.35 m
The current (I) is 0.819 A
The magnetic field (B) is 0.920 T
As the wire is carrying the current perpendicular to the magnetic field, the angle between the current and the magnetic field is 90°.
Hence, the magnetic force (F) is given by:
F = BILsin(θ)
F = 0.920 T × 2.35 m × 0.819 A × sin 90°F = 1.807 N
Therefore, the magnetic force exerted on a 2.35 m length of wire carrying a current of 0.819 A perpendicular to the magnetic field of 0.920 T is 1.807 N.
To know more about magnetic force refer here:
https://brainly.com/question/3160109#
#SPJ11
A car travels with a starting velocity of 20 m/s and an ending velocity of 40 m/s in 5 seconds what the acceleration
-
A. 4 m/s^2
B. 5 m/s^2
C. 6 m/s^2
D. 7 m/s^2
Answer: [tex]4 m/s^{2}[/tex]
Explanation:
First you take your end velocity and subtract the initial velocity ([tex]40-20=20[/tex])
Then you divide the difference by the time ([tex]20/5=4[/tex])
Giving you the result of [tex]4 m/s^{2}[/tex]
This all uses the equation [tex]V_{f}-V_{i}=ta[/tex]
The Quantum Physics says that an observer determines the reality upon observation. Now, why is the reality so consistent across all observers?
The consistency of reality across all observers in quantum physics can be explained by the concept of objective reality.
Objective reality is the idea that reality exists independently of any observer and is not affected by observation or measurement. Therefore, it is the same for all observers. Although the observer may interact with the system being observed, their actions or observations do not affect the underlying reality. Instead, they are simply revealing what was already there.
The idea that an observer determines reality in quantum physics is often misinterpreted. It is not that reality does not exist until it is observed, but rather that the act of observation changes the state of the system being observed. This is known as the observer effect or measurement problem, which is a fundamental issue in quantum physics that has yet to be fully resolved.
Know more about quantum physics here:
https://brainly.com/question/31040042
#SPJ11
A cordless drill is used to drill a hole in a wooden board. Which of the
following energy conversions begins the process that leads to the turning drill
bit removing the wood?
A. Gravitational energy stored in the drill is transferred to the wood.
B. Kinetic energy in the turning motor turns the drill bit.
C. Chemical energy stored in the battery creates a current.
D. Electrical energy in a current causes a motor to turn.
PLEASE HELP
A cordless drill is used to drill a hole in a wooden boar . Electrical energy in a current causes a motor to turn is energy conversions begins the process that leads to the turning drill.
What is Electrical energy ?Electrical energy is the energy associated with forces on electrically charged particles and their movement. This energy is supplied by a circuit's combination of current and electric potential (often referred to as voltage because electric potential is measured in volts). If there is a voltage difference in combination with charged particles, such as static electricity or a charged capacitor, the moving electrical energy is typically converted to another form of energy.
How electrical energy is converted to mechanical energy ?The magnetic field interacts with the electrical energy supplied by an electric current flowing in a wire. This interaction produces torque, which rotates the coil and thus generates mechanical energy.
To know more about Electrical energy , visit ;
brainly.com/question/16182853
#SPJ1
does this actual case require the lens to be stronger or weaker than if there were only air in our eyes?
In the actual case where there is water inside the eye, the lens needs to be stronger than if there were only air in our eyes.
This is because the refractive index of water is higher than that of air, meaning that light will bend more when it passes through water than when it passes through air. This makes it harder for the eye to focus light onto the retina, and so a stronger lens is needed to compensate for this increased bending.
If there is also water outside the eye, such as when we are underwater, we need to wear goggles to provide a layer of air in front of our eyes, which allows light to be refracted less and therefore makes it easier to see clearly.
To know more about lens, here
brainly.com/question/31190743
#SPJ4
Let us name three perpendicular directions as right, up, and toward you, as you might name them when you are facing a television screen that lies in a vertical plane. unit vectors for these directions are t, u, and t(hat) respectively. for the quantity (-30 m time 2t(hat)n, identify the magnitude, unit, and direction, if any. (a) magnitude 6 3 2 0 (b) unit newtons no unit meters newton meters (c) direction (c) direction away from you right up no direction down toward you left
Therefore, we can describe the direction as "away from you, to the right, and up." option c is correct.
The quantity (-30 m * 2t(hat) * n) represents a vector in three dimensions. To identify its magnitude, we can use the Pythagorean theorem, which states that the magnitude of a vector in three dimensions is given by the square root of the sum of the squares of its components. In this case, the magnitude is:Magnitude = sq rt((-30)^2 + (2)^2 + (0)^2) = sq rt(900 + 4) = sq rt(904) ≈ 30.06 mThe unit of this vector is in meters as indicated by the given quantity (-30 m). The direction of the vector can be determined by looking at its components. The first component is -30 m, which points in the negative direction of t(hat). The second component is 2, which points in the positive direction of u. The third component is 0, which means there is no component in the direction of t. Therefore, the vector points in the direction of -30t(hat) + 2u.To describe the direction, we can use angles or the direction cosines of the vector. Alternatively, we can describe it using the unit vectors t, u, and t(hat). The direction of the vector can be broken down into its components along each of these unit vectors. In this case, the vector has a component of -30 along t(hat), a component of 2 along u, and no component along t. Therefore, we can describe the direction as "away from you, to the right, and up."For such more question on magnitude
https://brainly.com/question/24468862
#SPJ11
What will happen to the brightness of bulbs A, B, and D if bulb C is removed from its socket? Explain your reasoning.
If bulb C is removed from its socket, the brightness of bulbs A, B, and D will be affected .
Explanation:
1. Bulb A: The brightness of bulb A will not change because it is in a separate parallel branch. Removing bulb C will not affect the current flowing through bulb A's branch.
2. Bulb B: The brightness of bulb B will increase. This is because bulb B and bulb C are connected in series. When bulb C is removed, the resistance in that branch decreases, causing an increase in current flow. Since brightness is directly proportional to the current squared (P = I^2R), the brightness of bulb B will increase.
3. Bulb D: The brightness of bulb D will decrease. When bulb C is removed and the current in bulb B's branch increases, the overall current drawn from the source will also increase. As a result, the voltage across the parallel branches will decrease.
Since bulb D is connected in parallel to bulbs B and C, it will experience a lower voltage, leading to a decrease in its brightness.
In summary, the brightness of bulb A remains the same, the brightness of bulb B increases, and the brightness of bulb D decreases when bulb C is removed from its socket.
To know more :
https://brainly.com/question/31213728
#SPJ11
Please answer and take a picture
The surface area of the triangular prism as shown in the diagram is 660 cm².
How to calculate the area of a triangular prism?To calculate the area of a triangular prism, we multiply the perimeter of the base to the length of the prism and add it to two times the area of the base.
Formula:
A = (a+b+c)L+bh...................... Equation 1Where:
A = Surface Area of the triangular prisma, b, c = Length of the sides of the baseL = Length of the prismh = Height of the base.From the question,
Given:
a = 13 cmb = 10 cmc = 13 cmh = 12 cmL = 15 cmSubstitute these values into equation 1
A = 15(13+13+10)+12×10A = 540+120A = 660 cm²Hence, the surface area of the triangular prism is 660 cm².
Learn more about surface area of a triangular prism here: https://brainly.com/question/30227989
#SPJ1
which of the following describe the event horizon? question 26 options: a boundary around a black hole whose size only depends on the mass of the black hole. a region around a black hole with a radius equal to the schwartzchild radius. a boundary in spacetime wherein events that happen cannot leave. a boundary around a collapsed star which remains the same size, regardless of how small the star inside becomes. the boundary around a black hole wherein light cannot escape.
The following options describe the event horizon:
- A region around a black hole with a radius equal to the Schwarzschild radius.
- A boundary in spacetime wherein events that happen cannot leave.
- The boundary around a black hole wherein light cannot escape.
The event horizon is the point of no return beyond which it becomes impossible for anything, including light, to escape the gravitational pull of a black hole. The size of the event horizon is determined by the mass of the black hole. According to the Schwarzschild radius, the radius of the event horizon is proportional to the mass of the black hole.
This boundary separates the inside of the black hole from the outside universe. Events that occur inside the event horizon are completely cut off from the outside universe, and anything that crosses the event horizon is pulled towards the singularity at the center of the black hole.
The event horizon is an essential concept in black hole physics and plays a vital role in understanding the properties of black holes. It is the outermost region of the black hole where the effects of the gravitational force are apparent, and it separates the inside of the black hole from the outside universe.
In conclusion, the event horizon is a crucial concept in black hole physics, and it is defined as the point of no return beyond which nothing, including light, can escape the gravitational pull of a black hole. A region around a black hole with a radius equal to the Schwarzschild radius, A boundary in spacetime wherein events that happen cannot leave and the boundary around a black hole wherein light cannot escape describe the event horizon.
For more such questions on Event horizon.
https://brainly.com/question/13045740#
#SPJ11
a baseball batter was able to impart to a 7.37 n-s impulse to a 0.145-kg baseball thrown at 62.5 mph, before receiving instruction. after improving his follow-through, the batter has been able to increase the impulse by 13.0%. what will be the new speed of the ball leaving the bat (in m/s) with this greater impulse? (use 1.0 m/s
The initial impulse of the baseball was 7.37 N-s when thrown at 62.5 mph. After the batter improved his follow-through, the impulse increased by 13.0%, resulting in a new speed of the ball leaving the bat of approximately 39.1 m/s.
The impulse of an object is equal to the force applied to it multiplied by the time for which the force acts. In the case of a baseball being hit by a bat, the impulse is what causes the ball to accelerate and leave the bat. The initial impulse of the baseball was 7.37 N-s when thrown at 62.5 mph. However, the batter improved his follow-through, resulting in a 13.0% increase in the impulse applied to the ball. This increase in impulse caused the ball to leave the bat with a higher velocity, which can be calculated using the formula for impulse and the mass of the baseball. The new speed of the ball leaving the bat is approximately 39.1 m/s, which is a significant improvement from the initial speed.
learn more about impulse here:
https://brainly.com/question/2193212
#SPJ4
a transverse wave of amplitude 3.0 cm , frequency 5.0 hz , and speed 3.0 m/s travels on an infinitely long slinky. part a how far apart are the two nearest points on the slinky that at one particular time both have the maximum magnitudes of displacements from their equilibrium positions? express your answer with the appropriate units.
Part A: 6.0 cm apart are the two nearest points on the slinky that at one particular time both have the maximum magnitudes of displacements from their equilibrium positions.
Part B: The period of the wave is 0.2 seconds.
A transverse wave of amplitude 3.0 cm, frequency 5.0 Hz, and speed 3.0 m/s travels on an infinitely long slinky. This question is a two-part question.
Let us solve each part of the question.
Part A:
We know that transverse waves move up and down perpendicular to the direction of the wave. It means that the maximum displacement of a particle from its equilibrium position is equal to the amplitude of the wave.
In one period (T), the wave completes one full cycle. The number of cycles completed in one second is called the frequency (f) of the wave.
The product of wavelength (λ) and frequency (f) of the wave is equal to its velocity (v).
The formula for a wave is given as follows:v = λf
Here, v is the velocity, λ is the wavelength and f is the frequency.
From the formula, we can calculate the wavelength of the wave. We are given the amplitude (A) and frequency (f) of the wave. We are to find the distance between two nearest points at maximum displacement.
To solve the problem, we use the formula for the wavelength of a wave.
λ = v/f
Substituting the values given:
λ = (3.0 m/s)/(5.0 Hz)
λ = 0.6 m
We know that for a transverse wave, maximum displacement is equal to the amplitude.
Therefore, the distance between two nearest points at maximum displacement is equal to two times the amplitude.
Substituting the value:
Distance between two nearest points at maximum displacement = 2 x amplitude= 2 x 3.0 cm = 6.0 cm
Part B:
The period of the wave is the time it takes for a complete cycle. The formula for the period is given as follows:
T = 1/f
Substituting the values:
T = 1/5.0 Hz
T = 0.2 seconds
For similar question on period of the wave
https://brainly.com/question/18818486
#SPJ11
what power lens is necessary to correct this person's vision to allow her to see distant objects? what power lens is necessary to correct this person's vision to allow her to see distant objects? -8.0 d -4.0 d 4.0 d 8.0 d
The power lens necessary to correct this person's vision to allow her to see distant objects is +4.0 D. The correct option is c.
What is a lens?A lens is a transparent optical device that refracts light to converge or diverge it. To form an image, lenses use a principle known as refraction. Refraction is the bending of light when it travels from one medium to another of differing density.
A convex lens, for example, is used to focus the image for those who suffer from hyperopia, also known as long-sightedness, or those who have difficulty seeing objects that are far away. It is a positive lens since it can refract parallel rays of light to meet at a focal point.
In summary, the power lens necessary to correct this person's vision to allow her to see distant objects is +4.0 D.
Here you can learn more about power lens
https://brainly.com/question/29178301#
#SPJ11
what is the thickness of lead that we would need to block a 20mev electron beam to only 5% transmission
The thickness of lead required to block a 20MeV electron beam to only 5% transmission is approximately 1.4mm.
What is an electron beam?An electron beam is a stream of electrons that can be directed and manipulated using magnetic and electric fields. An electron beam can be used to make the beams of charged particles, synchrotron light, or X-rays, which are widely used in research, medicine, and engineering.
What is the thickness of lead that we would need to block a 20MeV electron beam to only 5% transmission?The penetration of electrons through a substance is determined by the speed of the electrons, the density and composition of the substance, and the thickness of the substance.To calculate the thickness of the lead needed to block a 20MeV electron beam to only 5% transmission, we will use the exponential attenuation equation given below:
I = I₀e⁻μx
Where:
I₀ = initial intensity of electron beam
I = intensity of electron beam after passing through x thickness of lead
μ = mass attenuation coefficient of lead at 20Me
Vx = thickness of lead required to reduce the electron beam to 5% of its original intensity (95% absorption)
To calculate x, we can use the equation:
I/I₀ = 0.05 = e^(-μx)
Taking the natural logarithm of both sides of the equation gives:
-ln(0.05) = μx
Thus:
x = (-ln(0.05))/μ
The mass attenuation coefficient of lead at 20MeV is 0.206 cm²/g. We can convert this to m²/kg by dividing by the density of lead, which is 11.34 g/cm³. Therefore,
μ = 0.206/11.34 = 0.01816 m²/kg
Substituting this value for μ gives:
x = (-ln(0.05))/0.01816= 1.4 mm
Therefore, the thickness of lead needed to block a 20MeV electron beam to only 5% transmission is approximately 1.4mm.
Learn more about electron beam: https://brainly.com/question/15058767
#SPJ11
How does a star's color change as its temperature increases?
As a star's temperature increases, it becomes hotter. Its color changes from orange, through yellow, to white.
Describe what happens to a mass of warm air as it rises.
Please I NEED help!!!
Answer:
because of its height from the ground,the weather up is colder than the ground which makes the air turn cold
what force must be applied by a chain passing over a 8.99-cm-diameter sprocket in order to give the wheel an acceleration of 4.53 rad/s2?
1006.7 Newtons force must be applied by the chain passing over the sprocket in order to give the wheel an acceleration of 4.53 rad/[tex]s^2[/tex].
To calculate the force required, we need to use the formula:
F = ma
where F is the force, m is the mass of the wheel, and a is the acceleration of the wheel.
First, we need to calculate the radius of the sprocket:
r = d/2 = 8.99 cm/2 = 4.495 cm
The tangential acceleration of the wheel can be calculated using the formula:
a = r x α
where α is the angular acceleration of the wheel.
We can rearrange this formula to solve for α:
α = a / r = 4.53 / 4.495 = 1006.7 rad/s^2
Now, we need to assume a mass for the wheel.
Let's say the wheel has a mass of 1 kg.
Using the formula F = ma
we can calculate the force required:
F = m x a = 1 kg x 1006.7 rad/[tex]s^2[/tex] = 1006.7 N
For similar question on force
https://brainly.com/question/12785175
#SPJ11
you throw a rock into a pond. the diagram shows the height above and below the average level of the water measured as a function of time at some specific location in the pond. what is the period of this wave?
Period = t2 - t1 = 4.5 seconds - 2 seconds = 2.5 seconds is the length of time it takes for a wave to complete one full cycle.
How fast are waves moving?While the wave velocity is independent of the wave's timing and source, it is influenced by the wave's wavelength as it travels through a particular medium. The utilised medium affects the wave velocity.
What do wave wavelength and velocity mean?Wavelength is a unit used to describe the length of an entire wave cycle. The distance covered by a point on a wave is its velocity. The relationship between velocity and wavelength for every wave is typically proportional. Via the wave velocity formula, it is described.
To know more about wave visit:-
https://brainly.com/question/179394
#SPJ1
The earth is compressed to keep one third of radius .Calculate the acceleration of the new earth.(acceleration due to gravity of the earth before it is compressed is 9.8m/s^2.
Answer: read your text book
Explanation:
which choice organizes the different kinds of electromagnetic waves from longest wavelength to shortest?
The various types of electromagnetic waves that make up the electromagnetic spectrum are arranged according to decreasing wavelength and rising frequency.
Which waves convey the most energy when their wavelengths are the longest?Regardless of which peak we choose to measure from, the wavelength, remains the same. Waves with longer wavelengths have less energy than those with shorter wavelengths.
Which of the following has a shorter wavelength and longer frequency?The radio waves that make up the electromagnetic spectrum have the longest wavelengths. Radio waves range in frequency from 300 GHz to as low as 3 kHz, with wavelengths between 1 mm and 100 km.
To know more about wavelengths visit:-
https://brainly.com/question/28466888
#SPJ1
a 75.0-kg swimmer dives horizontally off a 465-kg raft initially at rest. if the diver's speed immediately after leaving the raft is 5.00 m/s, what is the corresponding raft speed?
The swimmer has a mass of 75.0 kg and a velocity of 5.00 m/s, the total momentum of the swimmer is 375 kg·m/s. The total momentum of the raft must be equal to the total momentum of the swimmer, so the raft must have a momentum of 375 kg·m/s.
Since the mass of the raft is 465 kg, the velocity of the raft must be equal to 0.80 m/s. This means that the raft will move in the same direction as the swimmer, but with a speed that is much slower due to its greater mass.
The raft speed can be determined by considering the law of conservation of momentum. Momentum is defined as the product of mass and velocity, and it is conserved when no external forces act on an isolated system. In this case, the swimmer and raft can be considered an isolated system since no external forces are acting on them.
Know more about momentum here
https://brainly.com/question/30487676#
#SPJ11
What is the most important use of absorption measurements?
The most important use of absorption measurements is to determine the concentration of a substance in a solution.
Absorption measurements are one of the most commonly used methods for detecting and quantifying the concentration of molecules in a solution. This technique measures the amount of light that is absorbed by a sample as a function of its wavelength.
There are two types of absorption measurements: transmission and reflection.
Transmission measurement is when the light passes through a sample and is absorbed by the solution. The amount of light that is absorbed is then measured and the concentration of the substance is determined based on the amount of light absorbed.
Reflection measurement is when the light is reflected off the surface of the sample and the amount of reflected light is measured. The concentration of the substance is then determined based on the amount of light absorbed by the sample.
Absorption measurements are important for many reasons. Some of the key uses of absorption measurements include:
Determining the concentration of a substance in a solution: Absorption measurements can be used to accurately determine the concentration of a substance in a solution. This is important for many applications, including medical diagnosis and drug development.
Detecting impurities in a sample: Absorption measurements can also be used to detect impurities in a sample. This is important for quality control and ensuring that products are safe for use.
Identifying unknown substances: Absorption measurements can also be used to identify unknown substances in a sample. This is important for forensic analysis and environmental testing.
For more question on absorption click on
https://brainly.com/question/26061959
#SPJ11
how much time does it take a radio signal to travel the 1.50×1011 m average distance from the earth to the sun?
The time it takes for a radio signal to travel the 1.50×10^11 m average distance from the earth to the sun is about 500 seconds for a radio signal to travel the average distance from the earth to the sun.
1. Identify the speed of the radio signal, which is the speed of light (since radio waves are a form of electromagnetic radiation).
The speed of light is approximately 3.00×10^8 m/s.
2. Use the formula: time (t) = distance (d) / speed (v).
3. Plug in the values: t = (1.50×10^11 m) / (3.00×10^8 m/s).
By calculating, we get:
t ≈ 500 seconds
Therefore, it takes approximately 500 seconds or 8 minutes and 20 seconds for a radio signal to travel from Earth to the Sun.
Read more about average earth-sun distance.
https://brainly.com/question/13106214
#SPJ11
car 1 moves toward car 2 with speed v. an observer in car 2 measures the frequency of the sound emitted by car 1's horn to be f. now, car 1 remains stationary while car 2 moves toward car 1 with speed v. the observer in car 2 now measures the frequency of car 1's horn to be f'. the relationship between the observed frequencies is:
The relationship between the observed frequencies can be given by the Doppler effect formula for sound which is
[tex]f' = \frac{(v_{sound} + v)}{(v_{sound})} \times f[/tex]
The Doppler effect formula is given by:
[tex]f' = \frac{(v_{sound} + v_{observer})}{(v_{sound} + v_{source})} \times f[/tex]
Where f is the frequency of the sound emitted by the horn, v_sound is the speed of sound in air, v_observer is the speed of the observer (in this case, car 2), and v_source is the speed of the source (in this case, car 1).
When car 1 moves toward car 2 with speed v, we have:
[tex]v_{source} = 0[/tex]
When car 2 moves toward car 1 with speed v, we have:
[tex]v_{observer} = v[/tex]
Substituting these values into the Doppler effect formula, we get:
[tex]f' = \frac{(v_{sound} + v)}{(v_{sound})} \times f[/tex]
Therefore, the relationship between the observed frequencies is [tex]f' = \frac{(v_{sound} + v)}{(v_{sound})} \times f[/tex].
Learn more about the Doppler effect:
https://brainly.com/question/30761545
#SPJ11
which of the following correctly describes the diffraction of light? multiple choice question. diffraction is the change in direction of light as it enters a new medium. diffraction occurs when light encounters a new surface and the light is bounced back. diffraction is the apparent bending of light around the edge of an object in its path. diffraction is the splitting of white light into its component colors.
Answer:
Slight bending of light as it passes around the edge
of an object.