Answer:
B I'm Pretty Sure :DDD
Explanation:
Balanced Forces
In one of your situations in the last section, you pushed or pulled on an object from opposite directions but with the same force. You observed that the object did not move. When the forces on an object are equal and in opposite directions, the forces are balanced, and there is no change in motion.
Please help! Why is the air pressure lower on top of the airfoil?
Please don't answer if you don't know thanks!
Answer: When air passes both above and below the airfoil, the air on top moves faster because of the curve, causing it to have a lower air pressure. This is according to Bernoulli’s principle, which states that faster moving air has less pressure than slower moving air. Also This is what causes the airplane to lift into the air.
Explanation:
Answer:
it pulls on the air above it accelerating that air down
have a nice day
Question 1 (Multiple Choice Worth 2 points)
In order to determine the wavelength, you must know the distance from the
trough of one wave to the crest of the next wave
O midpoint of a wave to the highest point of the next wave
crest of the wave to the equilibrium of the same wave
the crest of one wave to the crest of the next wave
Answer:
the crest of one wave to the crest of the next wave
Explanation:
In order to determine the wavelength, you must know the crest of one wave to the crest of the next wave
What is wavelength ?Wavelength is the distance between identical points (adjacent crust ) in the adjacent cycle of a waveform propagated in space or along wire .
wavelength can be determined by two methods
1) distance between crest and trough of that wave
2) distance between crest of one wave to the crest of the next wave or
distance between trough of one wave to the trough of the next wave
so , the correct answer will be d)the crest of one wave to the crest of the next wave
learn more about Wavelength
https://brainly.com/question/12924624?referrer=searchResults
#SPJ3
A car originally at rest reaches 40m/s after accelerating for 50s. Calculate its acceleration
Explanation:
initial velocity=0
final velocity=40m/s
time=50s
acceleration=?
now,
a=v-u/t
a=40-0/50
a=40/50
a=0.8m/s^2
answer
An unknown element shiny in color, malleable, conducts electricity, and is in group 2 on the periodic table is a non-metal.
True
False
NEPTUNE
•Number of days to orbit the sun:
•Distance around the sun:
Answer:
1. 165 years
2. 2.781 billion mi
Explanation:
Given the role of protein in the body, what is a likely consequence of not getting enough protein in the body?
OPTIONS:
A.
It will be very easy to get sick.
B.
It will result in a lack of energy.
C.
It will negatively impact coordination.
D.
It will cause the body to create too much sugar.
PLEASE NO LINKS
Answer: It is b
Explanation:
The lack of protein in the body will result in a lack of energy in the body. Hence, option B is correct.
What is protein?Proteins are created from a variety of amino acid building blocks. Our body needs dietary protein to supply amino acids for the growth and upkeep of our cells and tissues. As we become older, our dietary needs for protein change.
Proteins are made up of many different amino acids that are joined together. Both plants and animals have a lot of these 20 different amino acid building blocks. Each protein has a unique ratio and arrangement of the 300 or more amino acids that make up a typical protein.
Our body is made up of thousands of different proteins, each of which has a specific function. They contribute to the structural components of our cells and tissues, along with the countless enzymes, hormones, and active proteins produced by immune cells.
To get more information about Protein:
https://brainly.com/question/17095120
#SPJ5
Theo mixes cake batter and places it in the oven at 350°F for 45 minutes. Explain what type of reaction baking a cake represents in terms of energy.
Answer:
Baking a cake requires heat to be applied to the batter in order for it to cook and chemically change into cake. The energy or heat applied is absorbed by the ingredients, so this represents an endothermic reaction.
Explanation:
that's the sample answer, hope it helps
The batter needs to be heated in order to cook and chemically transform into a cake when it is baked. An endothermic reaction is taking place because the energy or heat applied is being absorbed by the constituents.
What is energy?The quantitative characteristic that is transferred to a body or a physical system in physics is referred to as energy. It manifests itself as heat and light, as well as the act of doing work. Energy is a resource that is conserved; it can only be changed from one form to another and cannot be created or destroyed, according to the law of conservation of energy. The SI unit of energy measurement is the joule (J).
According to the question, there are various types of reactions two of which are endothermic reactions and exothermic reactions.
In an endothermic lot of energy is absorbed and in opposition to the exothermic reaction lot of energy is released.
To get more information about Energy :
https://brainly.com/question/1932868
#SPJ5
Why should Mike repeat this investigation?
Mike needs to make sure that all the skateboards are not affected by friction.
Mike needs to have more than one set of numbers to make an accurate graph
The investigation needs multiple trials to determine which board is the control.
The investigation needs to be repeated several times to have the most accurate data.
Answer:
D
Explanation:
I NEED A 100% ACCURATE ANSWER FOR THIS QUESTION ASAP NO LINKS !!!
Answer:
static friction
Explanation:
Online physics Electrostatic lab
Use this free body diagram to help you find the magnitude of the force needed to keep this block in static equilibrium.
А.15.3 newtons
В.36.3 newtons
C. .63.5 newtons
D. 95.5 newtons
Split F₁ into its horizontal and vertical components:
F₁ = F₁ cos(θ) i + F₁ sin(θ) j
(boldface = vector; regular font = magnitude)
By Newton's second law, if the object is in equilibrium, then
• the net horizontal force on the block is
∑ F = F₁ cos(θ) - F₃ = 0 → F₁ cos(θ) = 70 N
• the net vertical force is
∑ F = F₁ sin(θ) + F₂ - W = 0 → F₁ sin(θ) = 65 N
Recall that cos²(θ) + sin²(θ) = 1 for any θ, so we have
(F₁ cos(θ))² + (F₁ sin(θ))² = (70 N)² + (65 N)²
F₁² = 9125 N²
F₁ = √(9125 N²) ≈ 95.5 N
EXPLAIN: Why must you reduce friction
order to move certain objects?
Friction is one of the forces working against a moving object, it makes it harder to move the more friction is exerted on the object. So, by reducing friction, you are making it easier for you to be able to move objects.
What is the linear momentum of a car of mass 1000 kg that is moving at a speed of 20 m/s?
а
Oь
50 kg m/s
0.02 kg m/s
20000 kg m/s
2000 kg m/s
Od
The correct option is 20000 kg m /s.
What is Momentum ?
Momentum is a concept in physics that describes an object's tendency to continue moving in its current direction at a constant speed. It is a vector quantity, meaning it has both magnitude and direction. The momentum of an object is defined as the product of its mass and velocity, and is represented by the equation: p = mv, where p is momentum, m is mass, and v is velocity.
In simple terms, momentum can be thought of as the "motion" of an object, and the larger the mass and velocity of an object, the greater its momentum. Momentum is a conserved quantity, which means that the total momentum of a system remains constant unless acted upon by an external force.
Given , Mass = 1000kg
Speed = 20 m/s
momentum = mv = 20000 kg m /s
To learn more about the momentum , click the given link ; brainly.com/question/86444
#SPJ1
What is the correct sequence for light traveling through a microscope?
light – objective lens – slide – eyepiece lens
light – slide – objective lens – eyepiece lens
eyepiece lens – objective lens – slide – light
slide – light – objective lens – eyepiece lens
Answerbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb:
Explanation:
b
If this decay has half-life of 2 years, how many years would it take for 10.8 g Protactinium-231 to remain given an initial mass of 86.3 g?
Answer:
Time = 6 years
Explanation:
First, we will calculate the no. of half life periods required to reduce the mass of Protactinium to the given value:
[tex]m' = \frac{m}{2^{n} } \\\\2^n = \frac{m}{m'}[/tex]
where,
n = no. of half-life periods = ?
m = initial mass = 86.3 g
m' = remaining mass = 10.8 g
Therefore,
[tex]2^n = \frac{86.3\ g}{10.8\ g}\\\\2^n = 8\\2^n = 2^3[/tex]
Since the bases are the same. Therefore equating powers:
n = 3
Now we calculate the time:
[tex]Time = (n)(Half-Life)\\Time =(3)(2\ years)[/tex]
Time = 6 years
how can the conductivity of a semiconductor be increased?
The answer and solution to how to calculate the minimum steam force.
Answer:
from which class are you the answer of this depend on your class
HEEEEEEELLLLLPPPPPPP 20 points and Brainliest
Why do radio telescopes convert radio waves (analog signals) to electrical (digital) signals for analysis?
Select ALL that apply
a
To reduce signal interference
b
To protect the information from Aliens
c
Data is analyzed on a computer
d
To make the data safe to analyze
Answer:
C. Data is analyzed on a computer
Explanation:
Computers can analyze electrical signals, not radio signals. This means that the radio waves need to be converted to electrical signals to help the computer analyze the data.
A lens 57.8 cm from an object
forms an image 38.5 cm from the
lens. What is the focal length of
the lens?
Answer:
23.11
Explanation:
accellus
The focal length of the lens is approximately 115.3 cm. The explaination is explained below.
To find the focal length of the lens, we can use the lens formula:
1/f = 1/v - 1/u
Where:
f is the focal length of the lens
v is the distance of the image from the lens
u is the distance of the object from the lens
Given:
v = 38.5 cm
u = 57.8 cm
Let's substitute these values into the formula:
1/f = 1/38.5 - 1/57.8
Now, let's calculate the right side of the equation:
1/f = (57.8 - 38.5) / (38.5 * 57.8)
= 19.3 / (2223.3)
≈ 0.008677
Now, we can find the focal length (f) by taking the reciprocal of both sides:
f = 1 / (0.008677)
≈ 115.3 cm
Therefore, the focal length of the lens is approximately 115.3 cm.
Learn more about lens on:
https://brainly.com/question/29834071
#SPJ2
A machine designed to stretch a stiff spring uses 1,550 J of energy to stretch the spring. If the work output is 1,200 J, what is the machine’s efficiency?
Answer:
77%
Explanation:
efficiency= work output/work input X 100%
e = 1,200j/ 1,550 j x100%
e = 1,200/1,550= 0.77
e = 0.77 x 100%
e = 77%
imagine no girls awnser this question ://
Answer:
im confused
Explanation:
1.Which of the following describes kinetic energy?
a. It is the energy of objects at rest. c. It is the energy of unmoving objects.
b. It is the energy of moving objects. d. It is the energy of objects in motion and in position.
2. What kind of energy does a sling shot that is pulled back all the way has?
a. kinetic energy c. elastic potential energy
b. chemical energy d. gravitational potential energy
3. Which of the following affects the amount of potential energy of an object?
a. mass and height b. mass and velocity c. height and velocity d. mass only
4. How will you increase the potential energy of a diver in the Olympics?
a. work out and lose weight c. go to a lower diving board
b. always jump d. go to a higher diving board
5. Which is the best example that something has kinetic energy?
a. water in the glass c. crawling ants on the wall
b. an apple placed at the rooftop d. car parked in front of the house
6. Which quantity does not affect the amount of kinetic energy?
a. mass b. velocity c. location d. none of these
7. If two objects with different mass are placed on the same table, which one contains
more energy?
a. The object with less mass c. Both objects have same amount of energy
b. The object with greater mass d. None of the two objects
8. A 60 kg man walks from the ground to the top of a 80 m tall building. How much
increase in gravitational potential energy is there? (Take g = 10N/kg)
a. 600 N b. 4800 J c. 8000 J d. 48000 J
9. The baseball pitcher throws a 0.145 kg baseball at a velocity of 30.0 m/s. What will be
the kinetic energy of the ball?
a. 62.55 J b. 65.25 J c. 65.55 J d. 62.25 J
10. If you are going to place a stone on a hill, at which point of the hill will it contain the
greatest amount of potential energy?
a. halfway down the hill c. top of the hill
b. on the hillside d. bottom of the hil
Explanation:
1.a
2.
a
3.
a
4.
a
5.
d
6.
a
7.
a
8.
b
9.
b
10.
c
I did all I can please mark me as brainllestReflection, refraction, and diffraction
all cause light
waves to
A) bend
B) change direction
C)stand still
D)absorb energy
Answer:
B) change direction
Explanation:
Diffraction is the change of direction of waves that occurs when waves travel from one medium to another.
Reflection is the change of direction of waves when they bounce off of a barrier.
Refraction is the change of direction of waves that happens when waves pass from one medium to another.
Each of these are all the change in direction of waves.
What happens during the process of deposition
Which is an example of a trace fossil?
animal burrow
skin of organism
preserved bone
petrified wood
Answer: The correct answer is A). Animal burrow because burrow fossils represent the preserved byproducts of behavior rather than physical remains, they are considered a kind of trace fossil. One common kind of burrow fossil is known as Skolithos, and the similar Trypanites, Ophiomorpha and Diplocraterion.
Animal burrow is an example of a trace fossil.
What is fossil?The preserved remnants of plants and animals that were submerged in sediments like sand and mud beneath ancient seas, lakes, and rivers are known as fossils. Any preserved sign of life that is typically older than 10,000 years is considered a fossil.
After death, soft body parts degrade quickly, while hard body parts, including bones, shells, and teeth, can be replaced by minerals that solidify into rock. Soft components like feathers, ferns, or other signs of life, such footprints or faeces, may also be preserved in extremely rare circumstances. Both less familiar fossils like ammonites and trilobites as well as microscopic-sized ones like single-celled foraminifera or pollen grains can be found in the remains.
What is trace fossil?A trace fossil, also known as an ichnofossil, is a record of biological activity preserved in the fossil record but without the actual preserved plant or animal remains. Contrasting with body fossils, which are the preserved remains of portions of an organism's body that were typically modified by later chemical activity or mineralization, are trace fossils. Ichnology, the study of such trace fossils, is the field of study of iconologists.
Learn more about geology here:
https://brainly.com/question/7978853
#SPJ6
You push a friends sitting on a swing. If you push with 200N of force and your friend accelerates at a rate of 4 m/s^2. Find the mass of your friend.
e friend sitting on the swing = 50 kg
Rate of acceleration = 4 m/s^2
The above information's are already given in the question. We need to utilize these information's in such a manner that the answer to the question can be determined easily.
We already know that
Force = Mass * acceleration.
This formula has to be used to find the force exerted.
Then
Force exerted = Mass of the friend * Acceleration
= (50 * 4) kg m/s^2
= 200 Newton
So the force exerted by me is 200 Newton. I hope the explanation and the procedure is clear to you and you are satisfied with it.
What type of interference occurs when a crest and trough join?
a) Constructive Interference
b) Destructive Interference
Answer:
Destructive interference
ví dụ về lực ma sát ?
lực ma sát khi viết phấn lên bảng
what is the geologic time scale and how is it used
Answer:
It is a type of map used to map out the geographical change over time. I believe
Explanation:
Three resistors of 4.0 ohms, 6.0 ohms, and 12 ohms are connected in parallel to an applied potential difference of 12 volts. (1) Calculate the equivalent resistance. (2) Determine the potential difference across each resistor. (3) Calculate the current through each resistor.
Answer:
(1) 2 ohms
(2) 12 Volts Across each resistor
(3) I₁ = 3 A, I₂ = 2 A, I₃ = 1 A
Explanation:
From the question,
(1) Equilvalent Resistance (Rt) for parallel connection is
1/Rt =(1/R₁)+ (1/R₂) + (1/R₃)
Where R₁ = 4 ohms, R₂ = 6 ohms, R₃ = 12 ohms
1/Rt = 1/4 +1/6 +1/12
1/Rt = (3+2+1)/12
1/Rt = 6/12
1/Rt = 1/2
Rt = 2 ohms.
(2) Since the resistors are connected in parallel, They will have the same potential difference across them,
Hence the P.d across each resistor = 12 Volts.
(3) For R₁,
I₁ = V/R₁ = 12/4
I₁ = 3 A.
For R₂,
I₂ = V/R₂
I₂ = 12/6
I₂ = 2 A
For R₃,
I₃ = V/R₃
I₃ = 12/12
I₃ = 1 A