Suggest one peice of laboratory apparatus which is suitable to be used for transferring the concentrated acid into a beaker. Explain your answer
Answer:
safety hand gloves face masks
Explanation:
what does the theory of plate tetonics state
Answer:
Plate tetonics theory is the idea that different tectonic plates, are constantly moving and changing the surface of our Earth. They can move in three ways, convergent, divergent, and transform. Seafloor Spreading is like an example of divergent movement. When the plates diverge from each other it can create various changes such as creating a new sea floor. You can use seafloor spreading as an example of the plate tetonics theory.
Explanation:
Which of the following pairs of elements could NOT react to form an ionic compound ? Check all that apply
Co and Br
C and O
K and F
Ag and O
Answer:
Ag and o
Explanation:
because they are not metals but not metals
Element X has two isotopes. One has a mass of 45.0 amu and is 45.0% abundant. The other has a mass of 47.0 amu and is 55.0% abundant. What is the average atomic mass of element X?*
0 46.1 amu
O 36.5 amu
0 43.8 amu
0 48.9 amu
The average atomic mass of element X that has two isotopes (one of 45.0 amu mass and 45% abundance and the other of 47.0 amu mass and 55.0% abundance) is 46.1 amu (option 1).
The average atomic mass (A) of element X can be calculated as follows:
[tex] A = m_{1}\%_{1} + m_{1}\%_{1} [/tex] (1)
Where:
m₁: is the mass of isotope 1 = 45.0 amu
m₂: is the mass of isotope 2 = 47.0 amu
%₁: is the abundance percent of isotope 1 = 45.0 %
%₂: is the abundance percent of isotope 1 = 55.0 %
Hence, the average atomic mass is (eq 1):
[tex] A = m_{1}\%_{1} + m_{1}\%_{1} = 45.0 amu*45.0\% + 47.0 amu*55.0\% = 45.0 amu*0.45 + 47.0 amu*0.55 = 46.1 amu [/tex]
Therefore, the average atomic mass of element X is 46.1 amu (option 1).
Find more about atomic mass here:
https://brainly.com/question/3187640?referrer=searchResultshttps://brainly.com/question/17338557?referrer=searchResultsI hope it helps you!
standardization is the process of titrating a solution prepared from
Standardization is the process of titrating a solution that is prepared from: a carefully measured solid mass to accurately find the concentration of titrant.
What is titration?Titration is also known as volumetric analysis (titrimetry) and it can be defined as a chemical process in which a solution of known concentration (titrant) is carefully and slowly added to another solution of unknown concentration, so as to determine the concentration or quantity of the analyte.
Similarly, a process referred to as standardization is used to titrate a solution that is prepared from a carefully measured solid mass to accurately find the concentration of titrant.
Read more on titration here: brainly.com/question/24584140
how many valence electrons does P have?
Answer:
5 valence electrons
Explanation:
Phosphorus is in group VA so it has 5 valence electrons and Oxygen is in group VIA so each oxygen has 6 valence electrons.
From the following which is not an ore
a.bauxite
b.haematite
c.calamine
d.cyolite
Answer: d. Cyolite
Explanation:
a.bauxite - Aluminum ore ✅
b.haematite - Iron ore ✅
c.calamine - an ore of zinc ✅
d.cyolite - ❌ the ore is cryolite
✅ - is an ore
❌ - not an ore
An atom has 17 protons and 18 neutrons.
Which symbol represents that atom, including its mass number?
Answer:
Cl
Explanation:
cl has mass number 35 and its atomic number is 17 so number of proton =atomic number 17 and number of neutron is =mass number -number of proton =35-17 =18
cuales son los nombres de la distribución de los electrones en un átomo ?
Atoms share one or more pairs of electrons.
Options:
Ionic Bond or Covalent Bond?
Answer:
covalent bonds
Explanation:
ionic transfer of e^- ions formed (charges)
ionic=non-metal+ metal
ex: F+Ca
covalent sharing e^- no true charges
covalent= non-metal+ non-metal
ex: F+P
( my notes)
Which characteristic do valence electrons indicate about reactions between atoms?
A.bond type
B.electronegativity difference
C.bond number
D.absolute electronegativity
Answer:
the answer is Bond Number
Explanation:
b r u h i just took the quiz and got the answer wrong lol
so turns out its BOND NUMBER
The whole Chemical Reaction Predictions Quick Check for Chemistry
1) chemical reaction
2) bond number
3) chemical bonds
4) C3H6O3
5) Iron oxides form when oxygen, a product of photosynthesis, is in the atmosphere
In an experiment combining vinegar and baking soda, gas is given off. In this
chemical reaction, the vinegar and baking soda are…
A elements
B products
C suspensions
D reactants
Answer:
The correct answer is D hope this helped :3Answer:
(D)
Explanation:
In the reaction between vinegar and baking soda, the reactants are vinegar (acetic acid) and baking soda (sodium bicarbonate). The products are sodium acetate, water, and carbon dioxide gas.
draw the product of the sn2 reaction and indicate stereochemistry. write the inorganic product in the answer palette.
SN2 reaction proceeds with inversion of configuration at the reacting carbon atom. The product has a different configuration at this carbon atom from the product.
SN2 reaction is a short form for substitution nucleophilic bimolecular reaction. It is a synchronous reaction in which the leaving group departs at the same time as the nucleophile attacks in a single transition state.
Recall that SN2 reaction proceeds with inversion of configuration hence the product has a different configuration at the reacting carbon atom from the product. The inorganic product in this reaction is HI. The organic product is shown in the image attached to this answer.
Learn more: https://brainly.com/question/10079361
The lower the pressure, the lower a liquid’s boiling point is. Water actually boils much faster at the top of a mountain where air pressure is lower. Without pressure water in the body begins to boil. What do you think will happen to your body as blood, saliva, and other fluids boil?
Answer:
The lower the pressure, the lower a liquid's boiling point is. That's why water boils much faster at the top of a mountain than it does at the bottom. In space, there is no pressure. So the boiling point could easily drop to your body temperature.
mark as a brainlist plz.
Why it is important to have balanced charges when forming ionic compounds?
[tex]\textbf{Question:-}[/tex]
Why it is important to have balanced charges when forming ionic compounds?
✿[tex]\textbf{Answer:-}[/tex]
As we know electrons can neither be created not destroyed,instead it can be transferred from one medium to another, therefore it is important to have balanced charges when forming ionic compounds. Net ionic equations must be balanced by both mass and charge. Also, the total number of electrons lost by the cationic species must be same with the total number of electrons gained by the anionic species.✿[tex]\textbf{More to know:-}[/tex]
Ionic Compounds-Ionic compounds are solids and hard due to the strong attracting force between the positive and negative ions. These compounds are generally brittle and break into pieces on application of pressure.Ionic compounds contain positively and negatively charged ions in a ratio that results in an overall charge of zero.Which layer or layers of Earth provide the heat and energy that fuels convection?
The layer of Earth which provide transfer from the white core to the lithosphere that fuels convection is the mantle.
What is the Mantle layer?A mantle can be described as a layer inside a planetary body bounded above a crust and below a core. Mantles are composed of rock or ice and are usually the largest massive layer of the planetary body.
The mantle layer of the earth is a layer of silicate rock between the crust and the outer core. The mass of the mantle of 4.01 × 10²⁴ kg which is 67% of the mass of the Earth. It's a thickness of 2,900 kilometers making up about 84% of Earth's volume.
The mantle layer is predominantly solid, but it behaves as a viscous fluid. At mid-ocean ridges, partial melting of the mantle produces oceanic crust, and at subduction zones, partial melting of the mantle produces continental crust.
The temperatures range of the mantle from 200 °C at the upper boundary with the crust to 4,000 °C at the core-mantle boundary. The convection of the mantle is a chaotic process, the mantle transfers heat that fuels convection.
Learn more about mantle, here:
https://brainly.com/question/28827790
#SPJ2
14. The following are a list of the four parts of John Dalton's atomic theory Indicate which of
the parts have been modified and why.
1. All matter is made of tiny, indivisible particles called atoms
2. All atoms of an element are identical and all atoms of different atoms are different
3. Atoms of one element cannot be turned into atoms of another element.
4. All atoms combine with one another in fixed whole number ratios.
Answer:
1
all matter is made of tiny particles called atom
Answer pls ASAPPP 50 pointsss!!
Answer:
There should only be one chemical reaction, this is because toasting the bread is not only using heat, but you cannot untoast the bread, and also theres a reaction with the amino acids and sugar in bread when it's cooked. I hope this helps you! :)
Answer:
One
Explanation:
One Chemical changes-It was when he toasted the bread. The heat changed the bread so that it has the crust on the outside
A horse runs 1 km in 15 s. What is the average speed
The average speed of the horse for the entire motion is 66.67 m/s.
The given parameters;
distance traveled by the horse, d = 1 km = 1,000 mtime of motion of the horse, t = 15 sThe average speed of the horse is calculated by dividing the total distance traveled by the horse by the time of motion.
The average speed of the horse is calculated as follows;
[tex]average\ speed = \frac{distance}{time} \\\\average\ speed = \frac{1000 \ m}{15 \ s} = 66.67 \ m/s[/tex]
Thus, the average speed of the horse for the entire motion is 66.67 m/s.
Learn more here: https://brainly.com/question/17289046
how do lone pairs of electrons influence the structure of molecules?
Answer:
lone pairs and bonds both repulsive each other
Explanation:
therefore bond angles will be changed that leads to the original geometry in nature
i don't need to know why i just want the awnser
Answer:
I remember doing this in 7th,
1. D
2. B or D, more leaning on B though
3. A
Why is it important for scientists to use the scientific method?
A. Scientists would not ask questions if the scientific method were
not used.
B. Experiments would not produce any data without the scientific
method.
C. The scientific method helps scientists get accurate, repeatable
results,
D. Using the scientific method means that the results will support the
hypothesis
Explanation:
It provides an objective, standardized approach to conducting experiments and, in doing so, improves their results. By using a standardized approach in their investigations, scientists can feel confident that they will stick to the facts and limit the influence of personal, preconceived notions.
I hope this helps you out!
15.24. Calcium hydroxide, also known as slaked lime, is used in industrial processes in which low concentrations of base are required. Only 0.16 g of Ca(OH)2 dissolves in 100 mL of water at 25°C. What is the concentration of hydroxide ions in 250 mL of a solution containing the maximum amount of dissolved calcium hydroxide?
The concentration of the hydroxide ions, OH¯ in 250 mL of the solution containing the maximum amount of dissolved calcium hydroxide is 0.01728 M
We'll begin by calculating the number of mole of in 0.16 g of Ca(OH)₂. This can be obtained as follow:
Mass of Ca(OH)₂ = 0.16 g
Molar mass of Ca(OH)₂ = 40 + 2[16 + 1] = 74 g/mol
Mole of Ca(OH)₂ =?Mole = mass / molar mass
Mole of Ca(OH)₂ = 0.16 / 74
Mole of Ca(OH)₂ = 0.00216 mole Next, we shall determine the molarity of the stock solution of Ca(OH)₂.Mole of Ca(OH)₂ = 0.00216 mole
Volume = 100 mL = 100 / 1000 = 0.1 L
Molarity of Ca(OH)₂ =?Molarity = mole / Volume
Molarity of Ca(OH)₂ = 0.00216 / 0.1
Molarity of Ca(OH)₂ = 0.0216 MNext, we shall determine the molarity of the diluted solution. This can be obtained as follow:Volume of stock solution (V₁) = 100 mL
Molarity of stock solution (M₁) = 0.0216 M
Volume of diluted solution (V₂) = 250 mL
Molarity of diluted solution (M₂) =?M₁V₁ = M₂V₂0.0216 × 100 = M₂ × 250
2.16 = M₂ × 250
Divide both side by 250
M₂ = 2.16 / 250
M₂ = 0.00864 MThus, the molarity of the diluted solution is 0.00864 M
Finally, we shall determine the concentration of the hydroxide ions, OH¯ in the diluted solution. This can be obtained as follow:Ca(OH)₂(aq) —> Ca²⁺(aq) + 2OH¯(aq)
From the balanced equation above,
1 mole of Ca(OH)₂ contains 2 moles of OH¯
Therefore,
0.00864 M Ca(OH)₂ will contain = 2 × 0.00864 = 0.01728 M OH¯
Thus, the concentration of the hydroxide ions, OH¯ in 250 mL of the solution containing the maximum amount of dissolved calcium hydroxide is 0.01728 M
Learn more: https://brainly.com/question/11471182
Water, made of 1 oxygen atom bonded with 2 hydrogen atoms, is what
Answer:
It is a water molecule.
Explanation:
A water molecule consists of two atoms of hydrogen linked by covalent bonds to the same atom of oxygen. Atoms of oxygen are electronegative and attract the shared electrons in their covalent bonds.
Answer:
A water molecule is an example of a molecule created through covalent bonding. Water is made up of one oxygen atom and 2 hydrogen atoms, hence the chemical symbol H2O. A hydrogen atom is made up of 1 proton at its core and 1 electron that revolves around the core in a three-dimensional orbit.
Explanation:
What two factors must be held constant for density to be a constant ratio?
Answer:
Temperature and Pressure
Explanation:
Temperature and pressure cause change in volume.
So any change in volume will alter the ratio of density as given by equation of density.
Density = mass/ volume
Change in volume will alter the ratio.
Kindly mark it branliest if the answer is little bit satisfying.
which scientist is credited with early, quantitative data on redox reactions?
Answer:
German chemist G.E. Stahl
Explanation:
this theory was first articulated in 1697
G. E. Stahl in 1697 is the scientist who is credited with early, quantitative data on redox reactions.
What are redox reactions?
The Redox reactions comprise of two parts a reduced part and an oxidized part, which occur simultaneously . The part which is reduced gain electrons and hence there is a increase in oxidation state of the species.
While, the part which is oxidized looses electrons and hence there is a decrease in oxidation state of the species.During redox reactions, there is no net change in the number of electrons . Electrons which are given off in oxidation are used up in reduction.
The ion or molecule which accepts electrons is called as oxidizing agent while the ion or molecule which donates electrons is called as a reducing agent.
Learn more about redox reactions,here:
https://brainly.com/question/13978139
#SPJ6
ANSWER ASAP PLZ???????????????????????????????????
Answer:
The answer should be A
Explanation:
Answer:
Leaving a Copper penny in vinegar until it turns green
Explanation:
the others are physical changes. when copper penny is put in vinegar, a reactive oixde layer is formed which is green in colour. namely, Cu(II) acetate.
The green growing on the penny of copper and the rust forming on the nail of iron are chemical changes. Boiling away salt water, scraping iron filings from a mixture of sand with a magnet, and breaking a rock with a hammer, are physical changes.
The organelle that serves as a microtubule organizing center during cell division is the
Answer:
Centríolo. Los Centríolos son orgánulos tubulares (en pares de dos en dos) que se encuentran en el citoplasma de las células animales, cerca de la membrana nuclear. Los centriolos tienen la función de organizar los microtúbulos, que son el sistema esquelético de la célula.
Explanation:
Espero te ayude
what is the polystyrene?
Answer:
Polystyrene is a versatile plastic used to make a wide variety of consumer products.
Explanation:
Answer:
polystyrene, a hard, stiff, brilliantly transparent synthetic resin produced by the polymerization of styrene. Styrene is obtained by reacting ethylene with benzene in the presence of aluminum chloride to yield ethylbenzene.
Explanation:
in other words its a plastic
In a movable pulley system, where does the other effort come from?
Answer:
In a movable pulley system, where does the other effort come from? is carried by this end of the rope. This means that the structure (ceiling) does half the effort.
Explanation: