what are the two quantities in this module for which we will develop unit factors to do dimensional analysis with chemical substances?

The pressure in the left intrapleural cavity changes when the valve was opened as : It went from negative number to zero and the pressure in intrapleural cavity equalized with the atmospheric pressure.

The pressure inside the pleural cavity is called as intrapleural pressure. It is characterized as negative pressure when the pressure inside the pleural cavity is typically only a little bit lower than the ambient pressure.

The external intercostal muscles and diaphragm contract during inspiration, expanding the thoracic cavity. As a result, the intrapleural pressure decreases, increasing the transpulmonary pressure and expanding the lungs.

To know more about intrapleural cavity, refer

https://brainly.com/question/9209660

#SPJ4

From 5.5 grammes of sodium fluoride, 4.1 grammes of magnesium fluoride will be created. The inorganic substance MgF2 stands for magnesium fluoride.

It naturally occurs as the rare mineral sellaite and is a white crystalline salt that is transparent over a broad range of wavelengths and has commercial use in optics used in space telescopes. With the formula NaF, sodium fluoride (NaF) is an inorganic substance. It is utilised in minute quantities in toothpaste, metallurgy, and as a flux in addition to fluoridating drinking water. It is a white or colourless substance that easily dissolves in water. Pharmaceutical manufacturers frequently use it as a source of fluoride. Mass in grammes is equal to 0.06548 times 62.301 grammes of MgF2.

= 0.06548 /62.301 = 4.1grams

Learn more about sodium fluoride here

https://brainly.com/question/2807538

#SPJ4

Magnesium sulfate, or MgSO₄, weighs 6.68 g, and dissolves about 0. 965 L of the a 0. 0575 M solutions.

A solution is created when a solvent and a solute, two different compounds, are mixed together. When a salt and a solvents is mixed, a solution is created. Commonly, one substance will dissolve in another to create a solution, such as when salt dissolves in water. Nevertheless, a solution can be produced under any state of matter.

Molar mass MgSO₄ = 120.36 g/mol

You have a 0.0575 M solution

That is equal to 6.9207 g/L or 0.0575 mol/L * 120.36 g/mol.

But you want mass in 0.965 L

Mass equals 0.965 L times 6.9207 g/L, or 6.68 g.

To know more about Solution visit:

https://brainly.com/question/25326161

#SPJ4

a) The change in concentration of each reactant and product as a function of reaction rate is − Δ[H₂]/Δt = -Δ[I₂]/Δt = +1/2Δ[HI]/Δt.

b) The rate as to how fast is [HI] decreasing is 4 mol/[tex]L^{-s}[/tex].

A chemical reaction is the process by which a single or more reactants change into a single or more new products. Chemical building blocks or compounds make up substances.

Given balance chemical reaction,

H₂(g) + I₂(g) → 2HI(g)

a) The rate of reaction in terms of the change in concentration of each reactants & products is

Rate = − Δ[H₂]/Δt = -Δ[I₂]/Δt = +1/2Δ[HI]/Δt

b)  where 2, 1, 1 and stoichiometric coefficients of HI, H₂ and I₂ respectively.

where - sign indicates consumption and + ve sign indicates formation

given d[I₂]/dt =2

-d[HI]/2dt= 2

-d[HI]/dt = 4 mol/[tex]L^{-s}[/tex].

To know more about chemical reaction visit:

https://brainly.com/question/29039149

#SPJ4

Answer:

7.01 hope this is right !

Explanation:

This problem can be summarized thusly:

qlost by copper = qgained by water + qgained by calorimeter

2) Therefore:

(610. g) (95.3 °C − x) (0.387 J g¯1 K¯1) = (45.0 g) (x − 36.5 °C) (4.184 J g¯1 °C¯1) + [(10.0 J/K) (x − 36.5 °C)]

Comment: The K and the °C cancel because the °C in this problem is a temperature difference (not one single specific value) and the "size" of one K = one °C.

22497.471 − 236.07x = 198.28x − 7237.22

424.35x = 29734.691

x = 70.1 °C

Answer:

180 g

Explanation:

Answer:

Explanation:

A. Periodic table is beautifully arranged to place elements with similar chemical properties together. A family or a group is a vertical column in periodic table that has elements with similar property.

B. They all have similar properties because they all have the same number of valence electrons that determine the chemical properties such as reactivity of the element.

C. Lithium, sodium, potassium all fall in group 1 called alkali metals and these elements all share the property of being some of the most reactive elements.

Ethylene C2H2 , ascorbic acid formula C₆H₈O₆, naphthalene Chemical formula C₁₀H₈.

The relative ratios of the various atoms in a compound are given by an empirical formula. The ratios are still valid at the molar level. H 2 O is made up of two hydrogen atoms and one oxygen atom. Similar to this, 1.0 mole of H2O is made up of 1.0 mole of oxygen and 2.0 moles of hydrogen.

Originally known as hexuronic acid, ascorbic acid is an organic molecule having the formula C 6H 8O 6. Although impure samples may appear yellowish, it is a white solid. Water readily dissolves it, resulting in moderately acidic solutions. It is a gentle reducer.

There are two enantiomers (mirror-image isomers) of ascorbic acid, generally referred to as "l" (for "levo") and "d." (for "dextro"). The most prevalent isomer is the l one, which is a naturally occurring form of vitamin C (also known as a "vitamer") and is necessary for both humans and many other animals to survive. Scurvy is caused by vitamin C deficiency and used to be a serious condition affecting sailors on lengthy sea trips. Due to its antioxidant qualities, it is utilized as a nutritional supplement and food additive.

Learn more about ascorbic acid: https://brainly.com/question/27670823

#SPJ1

Answer:

The answer Is c. mole fraction of ethanol in water=0.50

Explanation:

When a hydrogen atom is part of a molecular structure, it is always a terminal atom.

On the periodic table, hydrogen belongs to the group 1 element. Consequently, a hydrogen molecule contains two valence electrons. There are two identical atoms in the H2 molecule. As a result, any atom can be regarded as a centre atom. An atom attached to a central atom is referred to as a terminal atom if it is not H. Here are two illustrations of this differentiation. Add bonding electrons to the total number of electrons. The end of hydrogen will never come. The centre will often contain the least electronegative element. Since hydrogen can only have two electrons in its valence shell and hence can only make one bond, it can never be the centre atom.

To learn more about atoms click here https://brainly.com/question/1566330

#SPJ4

Answer:

Explanation:

the correct answer is A

Answer:

hey hope this work

The amount of bending depends on two things: Change in speed – if a substance causes the light to speed up or slow down more, it will refract (bend) more. Angle of the incident ray – if the light is entering the substance at a greater angle, the amount of refraction will also be more noticeable.

and the answer i think is A

The aforementioned claim is TRUE; as carbon-14 degrades steadily, it can be used to accurately estimate the age of rock samples.

The radioactive isotope of carbon 14 (14C) decays at a constant, well-known pace. Scientists can ascertain how long ago an organic substance died by calculating the quantity of 14C present in a sample of the material, such as bone or wood. This process, known as radiocarbon dating, is frequently used in geology and archaeology to date objects that are up to 50,000 years old.

Since carbon-14 decays steadily, it provides a trustworthy way to estimate the age of rock samples.

To know more about carbon-14 visit: https://brainly.com/question/4206267

#SPJ4

Answer: The crest and trough of two waves intersect.

Explanation:

The best description of the constructive interference of light is the crest and trough of two waves intersect.

When two waves travel in the same direction and are in phase with each other, their amplitude gets added, and the resultant wave is obtained. Here, the waves are said to have undergone constructive interference.

Constructive interference is a type of interference that occurs at any location along the medium where the two interfering waves have a displacement in the same direction

The best description of the constructive interference of light is the crest and trough of two waves intersect.

To know more about Constructive Interference

https://brainly.com/question/16098226

#SPJ2

Answer:

correct answer is 0.165 moles by calculation

The ions will combine to form a salt are Cl- and Cs+ when Hydrochloric acid (HCl) is combined with cesium hydroxide (CsOH) in a neutralization reaction.

HCl + CsOH --> CsCl + H2O

Cesium chloride is the salt that results from the neutralization of hydrochloric acid with cesium hydroxide. Because both of the bonds in salt compounds the positively charged cesium ion and the negatively charged chloride ion have electrical charges, they are referred to as ionic bonds. A neutralization reaction occurs when an acid and a base combine to form salt and water in an aqueous solution. A salt is the name for the aqueous cesium chloride that is created during the process.

To learn more about cesium chloride click here https://brainly.com/question/29108769

#SPJ4

Answer:

Option A, light energy from the sun

Explanation:

In the process of photosynthesis, the energy from sun in the form of light and heat is taken to undergo glycolysis and prepare glucose/starch (chemical).  

Thus, the light and heat energy of sun is converted into the chemical energy.  

Option B and C are incorrect because no kinetic energy or chemical energy is taken from any source.  

Option D is also incorrect because heat is taken but it is not taken from the surrounding environment. The source of heat energy is sun.  

Thus, only option A is correct

The molarity of KOH solution  will be 0.75 M.

The amount of moles of solute per liter of solution is known as molarity (M). Molarity is defined as moles of solute per liter of solution. To ascertain the concentration of an identified analyte, titration is a typical laboratory technique for quantitative chemical analysis. A standard solution with a known concentration and volume is prepared as the reagent, also known as the titrant or titrator.

The balanced equation is

[tex]H_{2} SO_{4}[/tex]+ 2KOH = [tex]2H_{2} O[/tex]+  [tex]K_{2} SO_{4}[/tex]

2.50 x [tex]10^{-2}[/tex] M= [tex]\frac{x}{0.2 L}[/tex]

So, 0.75 M KOH.

So, The molarity of KOH solution  will be 0.75 M.

Learn more about Molarity

brainly.com/question/13601876

#SPJ4

Answer:

C2H5OH + 3O2 → 2CO2 + 3H2O

Explanation:

Answer:

the third one is the one that you should pick

Answer:

it can predict the properties of new elements, because it organizes the elements according to their atomic numbers.

Creating new elements is not a simple process. Scientists use a particle accelerator to smash light atoms into a thin metallic foil that contains heavier atoms. They hope that the two nuclei at the centre of these atoms will fuse and form a heavier nucleus.

When these heavy elements form, they are usually highly unstable. They decay so quickly that we don’t usually see the element itself. Instead, we see a decay product. In that respect, even new elements aren't always 'discovered' directly. In some cases, scientists haven’t synthesized enough of the element for us to know what the element even looks like! Nevertheless, we consider the elements as known. We name them and list them the periodic table.

For example, in 2003, scientists first observed element 115 (ununpentium, Uup) They bombarded americium-243 with calcium-248 ions and produced four atoms of Uup, which lived for less than one fifth of a second.

₂₀ ⁴⁸Ca + ₉₅²⁴³Am → ₁₁₅²⁸⁸Uup + 3 ₀¹n

It took until September 2013 for the discovery to be confirmed, and about 50 atoms have been synthesized to date.

We can predict the properties of Uup because the Periodic Table organizes elements according to their atomic number.

Answer:

Explanation:

Pb(OH)2 + 2NaOH → Pb(OH)2 + 2NaOH

The balanced equation would be PbO + 2NaOH → Pb(OH)2 + Na2O

The reactant PbO is a lead oxide which is an acidic oxide, it reacts with NaOH, a strong base, to form Pb(OH)2, a lead hydroxide, which is a salt of lead, and Na2O which is sodium oxide , a base.

The amount of heat released when 75 g of CH4O reacts is -1705.64 kJ.

The equation given is the balanced equation for the combustion of methanol (CH4O) with oxygen to form carbon dioxide (CO2) and water (H20). The value of ΔΗ given (-726 kJ) is the enthalpy change for the reaction, which represents the amount of heat released or absorbed when the reaction occurs.

To calculate the amount of heat released when 75 g of CH4O reacts, we need to use the equation: q = n x ΔΗ where,

We know that the molar mass of CH4O is 32.04 g/mol, so we can convert 75 g to moles using the following formula: n = m/M where,

So, n = 75 / 32.04 = 2.34 moles

Using this value of n in the equation above, we can calculate the heat released as q = 2.34 x -726 = -1705.64 kJ

Therefore, -1705.64 kJ of heat is released when 75 g of CH4O reacts.

Learn more about Enthalpy here:

https://brainly.com/question/16985375

#SPJ4

The Sun is a close second in terms of object radii. It would be so spherical if shrunk to the size of a beach ball that the distance between its widest and narrowest diameters would be significantly smaller than the width of a human hair.

Our world is greatly influenced by the sun, which controls the weather, ocean currents, seasons, and climate as well as enabling plant life through photosynthesis. Life on Earth would not live without the heat and light provided by the sun.

Because they developed and collapsed under the force of their own gravity, the Sun and the majority of other big objects in space, including stars, planets, and large moons, are spherical. When our Solar System first formed, it was a massive, whirling cloud of gas and dust that gradually shrank due to gravity.

Thus, The Sun is a close second in terms of object radii.

To learn more about the sun, follow the link;

https://brainly.com/question/17376727

#SPJ1

Answer:

h2o,H,O are some of the elements

It would be due to the scientific method

Hope this helps :)

Answer:

Potassium was the first metal to be isolated by electrolysis. It was discovered by the  English chemist Sir Humphry Davy by decomposing molten potassium hydroxide (KOH) with a voltaic battery.

Explanation:

Potassium was discovered by the English chemist Sir Humphrey Davy.

(A) Vol. of solvent is 119.8 ml, (B) Molarity (M) of sol. is 5.00 M, (C) V1 of copper nitrate solution is 187.5 ml, (D) The instruction given is false.  

(A). To calculate the volume (ml) of a 2.25 M potassium hydroxide solution that contains 15.0 g of solute, we can use the formula:

The unit of measurement for molarity (M) is moles of solute per liter of solvent.

Rearranging the formula to solve for liters of solvent:

Molecularity = moles of solute / liters of solvent (M)

We know that the molar mass of potassium hydroxide (KOH) is 56.1 g/mol. To find the moles of solute, we can divide the given mass (15.0 g) by the molar mass of KOH:

15.0 g / 56.1 g/mol = 0.2679 moles

Now we can plug this value into the formula above:

Liters of solvent = 0.2679 moles / 2.25 M

Liters of solvent = 0.1198 L or 119.8 ml (rounded to 3 significant figures)

(B). To calculate the molarity of a solution containing 1.25 moles of glucose in 250. ml of solvent, we can use the formula:

The unit of measurement for molarity (M) is moles of solute per liter of solvent.

Plugging in the given values:

Molarity (M) = 1.25 moles / 0.250 L

Molarity (M) = 5.00 M

(C). To calculate the volume of a 10.00 M copper(II) nitrate solution that must be added to water to prepare 750.0 ml of a 2.500 M solution, we can use the formula:

M1V1 = M2V2

Where M1 and V1 are the concentration and volume of the original solution, and M2 and V2 are the concentration and volume of the final solution.

We know that the final solution has a volume of 750.0 ml and a concentration of 2.500 M, so we can plug in these values for V2 and M2:

M1V1 = 2.500 M x 750.0 ml

Now we can solve for V1 (the original volume) by rearranging the formula:

V1 = M2V2 / M1

V1 = (2.500 M x 750.0 ml) / 10.00 M

V1 = 187.5 ml (rounded to 4 significant figures)

(D). The instructions "Take 100.0 mL of the 10.0 M solution and add 900.0 mL water" are not correct for diluting a 10.0 M solution to a 1.00 M solution.

To achieve this dilution, you would need to take a smaller volume of the 10.0 M solution and add a larger volume of water, because the final volume should be larger than the starting volume.

For example, you could take 10.0 mL of the 10.0 M solution and add 90.0 mL of water, which would give you a final volume of 100.0 mL and a concentration of 1.00 M. The instruction given above is false.

To know more about molarity please refer: https://brainly.com/question/8732513

#SPJ4

Heterogeneous and homogeneous mixtures are the two types of mixtures.

When compared to homogeneous mixtures, heterogeneous mixtures can be visually divided into individual components. The most prevalent kind of homogeneous mixture is a solution, which can be a solid, liquid, or gas.

Solid, liquid, or gaseous homogeneous mixtures can exist. They are uniform in both appearance and chemical make-up. Water, air, steel, detergent, saltwater mixture, and other substances are examples of homogeneous mixtures. When two or more metals are combined in a specified proportion, an alloy is created.

A combination is said to be heterogeneous if its composition is not constant throughout. Vegetable soup is a complex concoction.

Know more about the mixtures at:

https://brainly.com/question/15304648

#SPJ1