Answer:
sunlight, water, carbon dioxide, soil, are the basics which you also have phosphorus and nitrogen
plz answer all questions, no links or i'll report
Answer:its c and d
Explanation:
According to kinetic molecular theory, collisions between gas particles in a sample of an ideal gas 1. increase the energy content of the gas sample 2. produce strong attractive forces between the gas particles 3. result in a net loss of energy by the gas sample 4. transfer energy between the gas particles
Answer:
should you prove this or explain or pick the correct answer
According to the kinetic molecular theory, collisions between gas particles in a sample of an ideal gas: Transfer energy between the gas particles. Hence, option 4 is correct.
What is kinetic theory of gases ?According to kinetic theory of gases, when gas particles collide with each other, they transfer energy between themselves. Some collisions will result in the transfer of kinetic energy from one particle to another, while others may result in a transfer of potential energy due to the intermolecular forces between the particles.
However, the total energy of the gas particles is conserved during these collisions, so there is no net loss or gain of energy by the gas sample as a whole.
The kinetic molecular theory also states that ideal gas particles do not have any significant attractive or repulsive forces between them, so option 2 is incorrect.
Additionally, collisions between gas particles do not increase the energy content of the gas sample (option 1) or result in a net loss of energy by the gas sample (option 3).
Find more on kinetic theory:
https://brainly.com/question/14349214
#SPJ2
Argon has a pressure of 34.6 atm. It is transferred to a new tank with a volume of 456 L and pressure of 2.94 atm. What was the volume of the original container?
Answer:
38.75 L
Explanation:
From the question,
Applying Boyles Law,
PV = P'V'....................... Equation 1
Where P = Original pressure of the Argon gas, V = Original Volume of Argon gas, P' = Final pressure of Argon gas, V' = Final Volume of Argon gas.
make V the subject of the equation
V = P'V'/P.................... Equation 2
Given: P = 34.6 atm, V' = 456 L, P' = 2.94 atm.
Substitute these values into equation 2
V = (456×2.94)/34.6
V = 38.75 L
Explain the process of photosynthesis in a well-written paragraph containing complete sentences. Use all of the following words:
xylem
phloem
carbon dioxide
stomata
sunlight
water
oxygen
sugar
Answer:
Photosynthesis is the process takes place in green plants in which the plants convert the carbon dioxide and water into the sugar molecule and oxygen in presence of the sunlight. The sunlight is trapped by the chlorophyll pigment, carbon dioxide uptake is facilitated by the stomata present on the leaves in the epidermis.
The water moves from the roots to the leaves and stem where it is used for photosynthesis and transpiration. The movement of water is through the xylem and sugar is move through the phloem from the leaves to a different part of the plant for nutrition and further process.
HELP PLEASE
an unknown gas has a pressure of 121.6 kPa, a volume of 31 L and a Temperature of 256K. How many moles of gas
are there?
Answer:
0.031moles
Explanation:
ok so it would help if I knew the marks but 1 mole = 1000L so if the volume was 31L then if you convert you will get that answer
The moles of gas at the given sample of gas is 1.7 moles.
What is ideal gas equation?Ideal gas equation gives idea about the behavior of gas at different condition & represented as:
PV = nRT, where
P = pressure = 121.6 kPa = 1.2 atmV = volume = 31 Ln = moles = ?R = universal gas constant = 0.082 L.atm / K.molT = temperature = 256KOn putting all these values, we get moles as:
n = (1.2)(31) / (0.082)(256) = 37.2 / 20.9
n = 1.7 moles
Hence required moles of gas is 1.7 mole.
To know more about ideal gas equation, visit the below link:
https://brainly.com/question/555495
#SPJ2
1.
If the hydrogen ion concentration of a solution is 1.30 x 10*M
What is the pH of the solution?
Answer:
h
Explanation:
gy
When two objects come in contact with each other, friction occurs and
a
both objects change directions
b
both objects will receive a certain amount of thermal energy and heat up
c
one object will heat up while the other cools down
d
both objects immediately cool down to room temperature
Answer:
b
both objects will receive a certain amount of thermal energy and heat up
THIS IS A THREE PART QUESTION IF YOU CAN HELP IT WOULD BE REALLY APPRECIATED SO I DONT FAIL.
1. If I add 2.65L of water to 245 grams of sodium acetate, what is the molarity of the NaC2H3O2 solution?
A. 10.8 m
B. 1.13 m
C. 1.08 m
D. 92.4 m
2. If I add 2.65 L of water to 245 grams of sodium acetate, what is the % by mass of NaC2H3O2 in this solution?
A. 8.46%
B.1.12%
C.10.8%
D.9.25%
3. If I add 2.65 L of water to 245 grams of sodium acetate, what is the mol fraction of NaC2H3O2 in this solution?
A. 0.203
B. 0.0846
C. 0.108
D. 0.0199
Answer:
1. B = 1.13M
2. A. 8.46%
3. D = 0.0199
Explanation:
1. Molarity of a a solution = number of moles of solute/ volume of solution in L
Number of moles of solute = mass of solute/molar mass of solute
Molar mass of NaC₂H₃O₂ = 82 g/mol, mass of NaC₂H₃O₂ = 245 g
Number of moles of NaC₂H₃O₂ = 245 g / 82 g/mol = 2.988 moles
Molarity of solution = 2.988 mols/ 2.65 L = 1.13 M
2. Percentage by mass of a substance = mass of substance /mass of solution × 100%
Mass of 2.65 L of water = density × volume
Density of water = 1 Kg/L = 1000 g/L; volume of waterb= 2.65 L
Mass of water = 1000 g/L × 2.65 L = 2650 g
Mass of solution = mass of water + mass of solute = 245 + 2650 =2895 g
Percentage by mass of NaC₂H₃O₂ = 245/2895 × 100% = 8.46%
3. Mole fraction of NaC₂H₃O₂ = moles of NaC₂H₃O₂/moles of solution
Moles of water = mass /molar mass
Mass of water = 2650 g; molar mass of water = 18 g/mol
Moles of water = 2650 g / 18 g/mol = 147.222 moles
Moles of solution = moles of solute + moles of water = 147.222 + 2.988 = 150.21
Moles of NaC₂H₃O₂ =2.988 moles
Moles fraction of NaC₂H₃O₂ =2.988/150.21 = 0.0199
What charge is mobile within atoms and can be transferred between atoms?
Answer:
For example, when atoms lose or gain electrons they become charged particles called ions. Three ways electrons can be transferred are conduction, friction, and polarization. In each case, the total charge remains the same. This is the law of conservation of charge.
Explanation:
plss help me in this question
Answer:
[tex]m_{CO_2}=0.88g[/tex]
Explanation:
Hello there!
In this case, since we are talking about a decomposition reaction whereby calcium carbonate is decomposed to calcium oxide and carbon dioxide according to the following chemical equation:
[tex]CaCO_3\rightarrow CaO+CO_2[/tex]
Next, we must recall the law of conservation of mass which states that matter cannot be neither created nor destroyed so the mass of calcium carbonate equal the addition of the mass of both calcium oxide and carbon dioxide:
[tex]m_{CaCO_3}=m_{CaO}+m_{CO_2}[/tex]
Which must be solved for the mass of carbon dioxide as we are given those of calcium carbonate and calcium oxide:
[tex]m_{CO_2}=m_{CaCO_3}-m_{CaO}\\\\m_{CO_2}=2.00g-1.12g\\\\m_{CO_2}=0.88g[/tex]
Best regards!
HELP PLEASE!!!!! 10 POINTS
What does the third quantum number (ml) describe?
Answer:
A. The specific orbital within a sublevel
Explanation:
the third quantum number is also called the magnetic quantum number ([tex]m_{l}[/tex]) and it represents the number of orbitals within a subshell.
For a reaction to be in equilibrium.... *
A. concentration of reactants and products remain constant
B. concentration of reactants and products must be the same
C. the rate of forward reaction is not equal to the rate of backward reaction.
Answer: C) the rate of forward reaction is not equal to the rate of backward reaction. This should be the answer.
Explanation:
How many grams are in 1.46 mol K2O?
Answer:
94.196 grams
Explanation:
Answer:
94.196 grams
Explanation:
Which statement is correct?
Natural processes happen spontaneously when they decrease the entropy of a system because entropy increase is counteracted by the flow of enthalpy from high temperatures to low temperatures.
Among solids, liquids, and gases, solids generally have the highest entropy because solid particles are the least mobile, and entropy is inversely related to mobility of particles.
Any change that increases the number of particles in a system increases entropy because it increases the randomness and disorder of the system.
Dissolving table salt (NaCl) in water leads to a decrease in entropy because salt particles, which are numerous individual crystals in solid form, become a homogenous solution in water.
Answer:
Any change that increases the number of particles in a system increases entropy because it increases the randomness and disorder of the system.
Explanation:
Imagine dropping a glass pitcher on a hard surface. The pitcher breaks into numerous shards. If the shards were collected and dropped again, they would tend to break into smaller shards; they would not reassemble themselves into a pitcher. In the universe, there is a tendency for order to be replaced with disorder. This tendency is related to a concept called entropy. The formal definition of entropy is a measure of the degree of randomness and disorder in a system.
definition of atomic number
The atomic number or proton number (symbol Z) of a chemical element is the number of protons found in the nucleus of every atom of that element. The atomic number uniquely identifies a chemical element. It is identical to the charge number of the nucleus. In an uncharged atom, the atomic number is also equal to the number of electrons.
Answer:
its basically represents the number of protons in the nucleus which in a neutral atom equals the number of electrons outside the nucleus and that determines the place of the element in the periodic table
Explanation:
sry i its too long
hope it helps
An eraser is an example of —
Group of answer choices
an insulator
a closed circuit
a conductor
an open circuit
Answer:
Insulator
Explanation:
An eraser can't conduct electricity, which makes it an insulator.
Which of the following elements has the largest atomic number?
O tellurium (Te)
lodine (0)
Otin (5)
O antimoney (5b)
Answer:
iodine is 53
tellurium is 52
antimony is 51
Otin Is 50
Explanation:
72.2% of element X is mass number 85. 27.8% is mass number
87. What is the average atomic mass of element X? (Round to
the correct number of significant figures.)
Answer:
11
Explanation:
Please help me out ........
Answer:c
Explanation:
In any engineering design problem, the first step is to understand the problem and identify one or more possible solutions. In this task, you’ll analyze the problems you face as the chemical engineer challenged with setting up the ammonia-making process. Recall the chemical equation for producing ammonia:
N2 + 3H2 ⇌ 2NH3 + energy
1.Explain the problem surrounding the ammonia-making process in terms of chemical equilibrium.
Answer:
Explanation:
About 2,070 results (0.60 seconds)
Answer is: at lower temperatures the reaction rate would decrease. The lower is the temperature, the slower the reaction becomes. ... Because this is exothermic reaction (enthalpy is less than zero), at lower temperatures, the equilibrium is in favor of ammonia, but the reaction doesn't proceed at a detectable rate.
Hi,
let us go through the question again
N2 + 3H2 ⇌ 2NH3 + energy
Explain the problem surrounding the ammonia-making process in terms of chemical equilibrium.
So I would approach this question on the basis of effect of each of the reactants and products concentration on the equilibrium synthesis of ammonia.
If the concentration of any reactant is increased, the yield of ammonia is increased.
If the concentration of ammonia is reduced by removing it as it forms, the yield will as well be increased.
This reaction also yields heat meaning it is an exothermic reaction, so when we increase the temperature, the yield will be reduced. Hence it is favored by low temperature.
HELP ASAP 10 POINTS
What type of interference caused a "super crest" to form during Young's experiment?
Constructive interference
Doppler interference
Destructive interference
Operational Interference
Answer:
the answer is destructive interference
HELP!!! WILL GIVE BRAINLYEST!!!!!! Record the Gas concentration associated with each of these time periods. (Note: ppm= parts per million)
Answer:
Explanation:
u need to go to the Greenhouse Effect Simulation (link is in ur Q).
open it and select the Greenhouse effect tab. Note that the concentration of various atmospheric gases during past eras can be determined by looking at gases trapped in ancient ice, such as that found in Antarctica.
On the right hand side panel of the simulation, under “Atmosphere during,” you can select Today, 1750, and Ice Age as historic time periods.
run simulations n collect the gas composition data.
Answer:
Explanation:
The question provides a link to the Greenhouse Effect Simulation. Results are from that:
Time Period H2O %RH CO2 ppm CH4 ppm N2O ppm
Today 58F 70% 338ppm 1843ppm 0.317ppm
1750 58F 70% 280ppm 0.730ppm 0.270ppm
Ice Age 36F ? 180ppm 380ppm 0.215ppm
Explain the equilibrium law as it relates to chemical equilibrium. Describe the types of stresses that cause chemical reactions in equilibrium to make more products.
When a reaction has reached equilibrium with a given set of conditions, if the conditions are not changed, the reaction will remain at equilibrium forever. The forward and reverse reactions continue at the same equal and opposite rates and the macroscopic properties remain constant.
It is possible, however, to disturb that equilibrium by changing conditions. For example, you could increase the concentration of one of the products, or decrease the concentration of one of the reactants, or change the temperature. When a change of this type is made within a reaction at equilibrium, the reaction is no longer in equilibrium. When you alter something in a reaction at equilibrium, chemists say that you put stress on the equilibrium. When this occurs, the reaction will no longer be in equilibrium and the reaction itself will begin changing the concentrations of reactants and products until the reaction comes to a new position of equilibrium. How a reaction will change when a stress is applied can be explained and predicted. That is the topic of this section.
A gas bubble occupies 14.0 mL, what is this volume into L?
How many liters of carbon dioxide will be produced at STP if 3.56 g calcium carbonate reacts completely with carbon dioxide? CaCO3 --> CaO + CO2
Answer:
V = 0.798 L
Explanation:
Hello there!
In this case, for this gas stoichiometry problem, we first need to compute the moles of carbon dioxide via stoichiometry and the molar mass of starting calcium carbonate:
[tex]3.56gCaCO_3*\frac{1molCaCO_3}{100gCaCO_3} *\frac{1molCO_2}{1molCaCO_3} =0.0356molCO_2[/tex]
Next, we use the ideal gas equation for computing the volume, by bearing to mind that the STP conditions stand for a pressure of 1 atm and a temperature of 273.15 K:
[tex]PV=nRT\\\\V=\frac{nRT}{P}\\\\V=\frac{0.0356mol*0.08206\frac{atm*L}{mol*K}*273.15K}{1atm} \\\\V=0.798L[/tex]
Best regards!
can you guys help me :) ?
winner takes all
Answer:
1. Ag2CO3
2.Ba3(PO4)2
3. Cu(OH)2
4. AL
Explanation:
6. Soap contains 76.5% C, 11.3% O, and 12.2% H and the MW = 847, what is the
molecular formula?
Answer:
the molecular formula of the soap is C₅₄H₁₀₂O₆
Explanation:
Given;
composition of carbon, C = 76.5%
composition of oxygen, O = 11.3%
Composition of hydrogen, H = 12.2%
The empirical formula is calculated as follows;
C: 76.5% / 12 O: 11.3% / 16 H: 12.2% / 1
= 6.375 = 0.706 = 12.2
Divide through by the least number (0.706);
= 6.375/0.706 = 0.706 / 0.706 = 12.2 / 0.706
= 9 = 1 = 17
The empirical formula = C₉H₁₇O
The molecular formula is calculated as follows;
(C₉H₁₇O)n = 847
(9 x 12 + 17 x 1 + 16 x 1)n = 847
(108 + 17 + 16)n = 847
141n = 847
n = 847/141
n = 6
The molecular is (C₉H₁₇O)6 = C₅₄H₁₀₂O₆
Therefore, the molecular formula of the soap is C₅₄H₁₀₂O₆
How many moles of C6H12O6 does 8.2 x 1023 molecules represent
Answer:
i.e. mass of 1 mole of glucose, C6H12O6 = (6 × 12.01 + 12 × 1.01 + 6 × 16.00) g = 180.18 g (using atomic weight data to 2 decimals) 1 mole of carbon atoms weighs 12.01 g and there are 6 moles of C atoms in 1 mole of glucose, so the mass of carbon in 1 mole of glucose = 6 × 12.01 g = 72.06 g.
What is true about endothermic reactions?
Endothermic reactions release heat to the surroundings.
The enthalpy of products in endothermic reactions is lower than the enthalpy of reactants.
The enthalpy of an endothermic reaction is positive.
Endothermic reactions have an enthalpy of zero.
Answer:
The enthalpy of an endothermic reaction is positive, I believe.
''The enthalpy of an endothermic reaction is positive'' is the true statement about endothermic reaction
What is enthalpy of endothermic reaction?If a reaction absorbs more energy than releasing it, the reaction is considered as endothermic and enthalpy will be positive while on the other hand, if a reaction absorbs less energy and releasing more, the reaction is considered as exothermic and enthalpy will be negative.
So we can conclude that option C is the right answer.
Learn more about reaction here: https://brainly.com/question/26018275
Help! Is there a way to email outlook support for help? If so please comment their email address, as I can't call them on their hotline right now.
Thank you, so much in advance! :)
Answer:
Explanation:
Even if you have a Hotmail email address, you now use the Outlook.com interface to ... I searched and found a Hotmail support number, but is it legit? ... one from Leo's e-mail, I receive a message from windows stating it can't find the site.