We draw an Amperian loop within a wire that carries current uniformly across its circular cross-sectional area. Which describes the value of the integral in Ampere's law?
- It is proportional to the total current.
- It is inversely proportional to the total current.
- It is proportional to the current encircled by the loop.
- It is inversely proportional to the current encircled by the loop.
- It is proportional to the current that is outside the loop.
- It is inversely proportional to the current that is outside the loop.

Answer:

15.

a) The energy of a single photon can be calculated using the equation: E = hf, where h is Planck's constant (6.63 x 10^-34 J s) and f is the frequency of the radiation. Thus, E = (6.63 x 10^-34 J s)(c/λ), where c is the speed of light (3.00 x 10^8 m/s) and λ is the wavelength of the radiation. Using the maximum kinetic energy of an emitted photoelectron (0.3 eV) and the work function of the metal plate (2.2 eV), we can find the energy of a single photon: E = 2.5 eV = 4.0 x 10^-19 J.

b) The maximum kinetic energy of a photoelectron can be related to the frequency of the radiation by the equation: KEmax = hf - Φ, where Φ is the work function. Thus, f = (KEmax + Φ)/h. Substituting the given values, we get: f = (0.3 + 2.2) eV/(6.63 x 10^-34 J s) = 3.4 x 10^14 Hz.

c) If the frequency of the radiation is increased, more photoelectrons will be emitted per unit time, so the current in the circuit will increase.

16. a) The threshold frequency of a metal is the minimum frequency of radiation required to emit photoelectrons from the surface of the metal.

i. The graph shows that the kinetic energy of the emitted photoelectrons is zero for frequencies below 5.0 x 10^14 Hz. This means that the photoelectrons are not emitted below this frequency, indicating that the threshold frequency is 5.0 x 10^14 Hz.

ii. The work function of the metal can be calculated using the equation: Φ = hf - KEmax, where h is Planck's constant and KEmax is the maximum kinetic energy of the emitted photoelectrons. At the threshold frequency, KEmax is zero, so Φ = hf. Substituting the given values, we get: Φ = (6.63 x 10^-34 J s)(5.0 x 10^14 Hz) = 3.32 x 10^-19 J.

(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)

Of the four inner planets, Mercury has the most eccentric orbit, with an eccentricity of 0.21. The inner planets of our solar system - Mercury, Venus, Earth, and Mars - have nearly circular orbits around the sun.

Their eccentricities (the degree to which their orbits deviate from perfect circles) are relatively low compared to the outer planets. This means that its orbit is more elliptical  than the orbits of the other inner planets, which have eccentricities ranging from 0.0068 (Venus) to 0.0934 (Mars).

Mercury's highly eccentric orbit means that its distance from the Sun varies greatly throughout its year, which leads to extreme temperature variations on its surface. Conversely, Venus has nearly circular orbit and experiences relatively stable temperatures as a result.

To know more about eccentric orbit , here

brainly.com/question/6175018

#SPJ4

The types of light in order of increasing energy are Radio, Infrared, Orange, Green, Ultraviolet, and Gamma rays. Radio waves have the lowest energy, followed by infrared, orange, green, and ultraviolet.

The parts of the electromagnetic spectrum are referred to as gamma rays, X-rays, ultraviolet radiation, visible light, infrared radiation, and radio waves, from highest to lowest energy.

Violet light has the shortest wavelength of all visible light, giving it the most energy. The longest wavelength and lowest energy are found in radio waves.

to know more about energy here:

brainly.com/question/1932868

#SPJ1

The statement about dark matter that is false is "it extends to 200,000ly from the center of the galaxy."

Dark matter refers to the invisible matter in space that is thought to be present in galaxies in large amounts. It cannot be seen, felt, or heard, but its gravitational effects can be observed.

The following statements about dark matter are true:

It may be undiscovered subatomic particles.

It makes up more mass compared to luminous matter.

It makes up about 80% of the total mass of our galaxy.

It is in a halo that is nearly spherical.

Dark matter does not extend to 200,000ly from the center of the galaxy. Dark matter is spread throughout the galaxy and beyond, extending far beyond the visible disk of the galaxy.

Learn more about galaxies:

https://brainly.com/question/1241789

#SPJ11

The waterline separates the submerged section of the hull of the boat from the section above the water level.

The submerged section on the hull of a boat is separated from the section above the water level by the waterline. The waterline is the point where the surface of the water meets the hull of the boat. When a boat is placed in the water, the weight of the boat pushes down on the water and displaces it, creating a gap between the water and the hull. The waterline marks the level at which the boat displaces the water, separating the section of the hull that is below the waterline and submerged in water from the section above the waterline. The size and shape of the submerged section of the hull affect the boat's buoyancy, stability, and speed, making it an important design consideration for boatbuilders.

learn more about waterline here:

https://brainly.com/question/14565517

#SPJ4

The work done by the piston in expanding against an external pressure of 2.35 atm is 545 J.

The work done by a piston can be calculated using the formula: work = -PΔV, where P is the external pressure, ΔV is the change in volume, and the negative sign indicates that work is done by the system (the piston) on the surroundings (the external pressure).

In this case, the external pressure is 2.35 atm, the initial volume is 0.455 L, and the final volume is 1.318 L. Therefore, the change in volume is:

ΔV = final volume - initial volume

ΔV = 1.318 L - 0.455 L

ΔV = 0.863 L

Substituting the values into the formula, we get:

work = -PΔV

work = -(2.35 atm)(0.863 L)

work = -2.025 J

Since the work done is negative, it means that the system loses energy as it expands against the external pressure. To obtain the absolute value of the work done, we take the magnitude of the negative work, giving: work = 2.025 J

Therefore, the work done by the piston in expanding against an external pressure of 2.35 atm is 545 J (rounded to three significant figures).

To know more about work done, refer here:

https://brainly.com/question/29762840#

#SPJ11

Astronomers can measure the age of a meteorite that fell from the skies by using radiometric dating techniques.

Specifically, they look for isotopes of certain elements in the meteorite that undergo radioactive decay at a known rate. By measuring the ratio of the parent isotopes to the daughter isotopes, scientists can determine how much time has passed since the meteorite was formed.

For example, the decay of radioactive isotopes of uranium and thorium to lead can be used to date rocks that formed more than 4.5 billion years ago, which is the estimated age of the solar system. Therefore, by analyzing the isotopes present in meteorites, astronomers can determine their age and gain insights into the early history of our solar system.

To know more about meteorite, here

brainly.com/question/29730106

#SPJ4

If two equal forces are acting in opposite directions on an object, the net force is zero.

The net force when two equal forces are acting in opposite directions on an object is zero. Here's a step-by-step explanation:
1. First, identify the magnitudes and directions of the two forces acting on the object. Let's say force F1 acts in the positive direction, and force [tex]F_2[/tex] acts in the negative direction.
2. Since the forces are equal in magnitude, we can represent them as [tex]F_1[/tex] = [tex]F_2[/tex]
3. Net force is the vector sum of all individual forces acting on the object.

In this case, we only have two forces: [tex]F_1[/tex] and [tex]F_2[/tex].

To calculate the net force, we can use the formula:

Net Force = [tex]F_1[/tex] + [tex]F_2[/tex]
4. As [tex]F_1[/tex] and [tex]F_1[/tex] are acting in opposite directions, we need to take into account their directions when calculating the net force.

As [tex]F_1[/tex] is in the positive direction and [tex]F_2[/tex] is in the negative direction, the formula becomes:

Net Force = [tex]F_1[/tex] - [tex]F_2[/tex]
5. Now, we can substitute the values of [tex]F_1[/tex] and [tex]F_2[/tex].

Since [tex]F_1[/tex] = [tex]F_2[/tex], the equation becomes:

Net Force = [tex]F_1[/tex] - [tex]F_1[/tex].
6. Finally, when we subtract [tex]F_1[/tex] from itself, the result is zero.

Therefore, the net force is zero when two equal forces are acting in opposite directions on an object.
For similar question on net force

https://brainly.com/question/14361879

#SPJ11

The option which represents a decrease in gravitational potential energy is B, where a girl jumps down from a bed.

Gravitational potential energy (GPE) is the energy a body has due to its position in a gravitational field. The higher an object is lifted, the greater its gravitational potential energy. The energy needed to lift an object comes from work done on it, which increases its potential energy by a comparable amount.

When the girl is on the bed, she is at a higher height than when she jumps down. Her height decreases from the bed, therefore the GPE will decrease. Thus, in the system where a girl jumps down from a bed, there is a decrease in gravitational potential energy.

For more question on gravitational potential energy click on

https://brainly.com/question/15896499

#SPJ11

Answer:

The horse traveled 240 meters

Explanation:

In this example we are given power, the applied/resultant force, and time.

We can use the following equations to evaluate the distance.

[tex]\boxed{\sf Work=Power\cdot Time}[/tex]

[tex]\boxed{\sf Work=Force\cdot Distance}[/tex]

We can set them equal to each other.

[tex]\sf Force \cdot Distance=Power\cdot Time[/tex]

We can isolate Distance by dividing both sides of the equation by Force.

[tex]\sf Distance=\dfrac{Power\cdot Time}{Force}[/tex]

Now we have an equation to evaluate the distance.

Numerical Evaluation

In this example we are given

[tex]\sf Power=60000 \\Time=80\\Force=20000[/tex]

Substituting our values into our equation for Distance yields

[tex]\sf Distance=\dfrac{60000\cdot 80}{20000}[/tex]

[tex]\sf Distance=\dfrac{4800000}{20000}[/tex]

[tex]\sf Distance=240[/tex]

Lets figure out what unit we end up with.

When you multiply watts by seconds, you get the unit of energy, which is joules (J). When you divide joules by newtons, you get the unit of distance, which is meters (m).

Temperature and Density would cause change in the speed of a sound wave. Hence, the correct option is (c) i.e. both a & b.

A change in the speed of a sound wave can be caused by several factors:

1. Temperature: The speed of sound in a medium is directly proportional to the temperature of the medium. As the temperature of a medium increases, the speed of sound in that medium also increases.

2. Density: The speed of sound in a medium is inversely proportional to the density of the medium. As the density of a medium increases, the speed of sound in that medium decreases.

3. Pressure: The speed of sound in a gas is directly proportional to the pressure of the gas. As the pressure of a gas increases, the speed of sound in that gas also increases.

4. Humidity: The speed of sound in a gas, such as air, can be affected by the amount of water vapor present in the gas. As the humidity of the air increases, the speed of sound in that air decreases.

5. Composition of the medium: The speed of sound can also vary depending on the type of medium through which it is traveling. For example, sound travels faster through solids than through gases.

These factors can individually or collectively cause a change in the speed of sound waves.

To know more about speed please refer: https://brainly.com/question/30265720

#SPJ1

Question -

Which of the following would cause a change in the speed of a sound wave.

(a) Temperature

(b) Density

(c) Both a & b

(d) None of the above

The minimum requirements for the design, materials, fabrication, erection, testing, and inspection of various types of piping systems are covered by ASME B31.3 Code.

To know more about fabrication

https://brainly.com/question/23358361

#SPJ4

The radii of a symmetric converging plastic lens that will form an image on the screen twice the height of the object is [tex]R_1[/tex] = 4.28 cm and [tex]R_2[/tex] = 2.1333 cm.

The index of refraction of plastic is 1.59.

The height of the object = h

The height of the image = 2h

We know that the magnification formula is M = -v/u,

where M = -2 (since the height of the image is twice the height of the object),

v is the distance between the image and the lens and

u is the distance between the object and the lens.

Therefore, -v/u = -2 ... (1)

We also know that the lens formula is [tex]\frac{1}{v} - \frac{1}{u} = \frac{1}{f}[/tex],

where f is the focal length of the lens.

Since the lens is symmetric, the radius of curvature of the two surfaces will be equal, which is the same as the focal length of the lens.

Therefore, f = R/2, where R is the radius of curvature of the lens surfaces.

Substituting f = R/2 in the lens formula and simplifying it,

we get, u = 2f/3 ... (2)

We can get the value of v by substituting equation (2) in equation (1) and solving for v.

We get v = -4f/3.

Substituting u and v values in the lens formula, we get,

[tex]\frac{1}{v} - \frac{1}{u} = \frac{1}{f}[/tex], Solving for f, we get

f = 1.0667 cm.

We also know that f = R/2, so R = 2f.

Substituting f value, we get R = 2(1.0667) = 2.1333 cm.

The radii of the two surfaces of the lens will be equal, so [tex]R_1 = R_2[/tex] = 2.1333 cm.

To learn more about lenses refer to: brainly.com/question/28293498

#SPJ11

The magnitude of the force per meter of length on the wire is 6.57 N/m when the wire is perpendicular to the magnetic field. The magnitude of the force per meter of length on the wire is 3.77 N/m when the angle between the wire and field is 34.5∘.

The magnitude of the force per meter of length on a straight wire carrying a 7.30 a current when perpendicular to a 0.90 T uniform magnetic field can be calculated using the formula:

F = B * I * L

where F is the force, B is the magnetic field, I is the current, and L is the length of the wire.

Since we want to calculate the force per meter of length, L = 1 meter.

F = 0.90 T * 7.30 A * 1 m = 6.57 N/m

If the angle between the wire and field is 34.5°, we need to use the formula:

F = B * I * L * sin(θ)

where θ is the angle between the wire and the magnetic field.

F = 0.90 T * 7.30 A * 1 m * sin(34.5°) = 6.57 N/m * sin(34.5°) ≈ 3.77 N/m

So, the magnitude of the force per meter of length is 6.57 N/m when perpendicular, and 3.77 N/m when the angle is 34.5°.

Learn more about magnitude.

https://brainly.com/question/2596740

#SPJ11

The acceleration of van is -10.0 m/s².

Acceleration is defined as the rate of change of velocity. It is a vector quantity, which means it has both magnitude and direction. In the context of this problem, the van's velocity changed from 20 m/s to 10.0 m/s in a time of 3.0 s. We can calculate the acceleration of the van using the formula,

acceleration = (final velocity - initial velocity) / time

Substituting the given values, we get,

acceleration = (10.0 m/s - 20 m/s) / 3.0 s

= -10.0 m/s²

The negative sign indicates that the acceleration is in the opposite direction to the initial velocity. In other words, the van is decelerating, or slowing down.

To know more about acceleration, here

brainly.com/question/21329936

#SPJ4

Answer:9.81 m/s2.

Explanation:

If a 2 kg object is falling at 3 m/s, at what rate is gravity working on the object ? The object is falling at 3 m/s. Gravity is working on the object at a rate of 9.81 m/s2.

A solar eclipse may occur during the new moon phase of the moon. During this phase, the moon is situated between the Earth and the sun. This positions the moon in such a way that it blocks the sun's rays, causing a solar eclipse.

There are different phases of the moon that occur in a lunar cycle. Each of these phases is determined by the relative position of the sun, Earth, and moon. The lunar cycle is approximately 29.5 days long, and it consists of eight different phases. These phases include the new moon, waxing crescent, first quarter, waxing gibbous, full moon, waning gibbous, third quarter, and waning crescent.

In general, solar eclipses occur during the new moon phase of the moon. This is because the moon's position during this phase is directly between the Earth and the sun. As a result, the moon casts a shadow on the Earth, blocking the sun's rays and causing a solar eclipse. However, not all new moon phases lead to a solar eclipse. This is because the moon's orbit is tilted in relation to the Earth's orbit around the sun. Therefore, it must be in the correct position to cause a solar eclipse to occur.

Additionally, it is important to note that not all solar eclipses are total eclipses. Sometimes, the moon only partially covers the sun, resulting in a partial solar eclipse.

For more such questions on Solar eclipse.

https://brainly.com/question/4702388#

#SPJ11

The radio waves that WPL emits have a wavelength of roughly 3.14 metres.

An FM radio wave's frequency and wave size must be known in order to determine its wavelength. An FM radio wave has a frequency of 94.1 MHz. FM radio waves are measured in metres. An FM radio wave therefore has a wavelength of [tex]94.1*106[/tex] metres.

c = fλ

where [tex]c = 3.00 x 10^8 m/s[/tex] (speed of light in a vacuum).

We need to convert the frequency from MHz to Hz:

[tex]95.5 MHz = 95.5 x 10^6 Hz[/tex]

Now we can solve for the wavelength:

c = fλ

λ = c/f

[tex]λ = (3.00 x 10^8 m/s) / (95.5 x 10^6 Hz)[/tex]

λ = 3.14 m

To know more about wavelength visit:-

https://brainly.com/question/13533093

#SPJ1

When Kate stops oscillating and finally comes to rest, she will be hanging 1.96 meters below the bridge.

This is because, the time period T of a pendulum depends on its length l and acceleration due to gravity g. Mathematically, T = 2π √(l/g)

Therefore, l = (gT²)/(4π²)

Given, T = 4s and g = 9.8m/s²

We can find the length of the pendulum. Hence, l = (9.8m/s²×(4s)²)/(4π²) = 1.96m

Therefore, Kate's distance below the bridge will be 1.96 meters.

Know more about distance

https://brainly.com/question/26550516

#SPJ11

The Doppler method is used to discover a planet around a nearby star that is similar to the Sun; the velocity curve has a period of 6 months. We can conclude that the planet's orbital distance is 1 AU.

The Doppler method is a technique for discovering planets that orbit other stars. The Doppler method, also known as the radial velocity method, involves measuring the movement of a star towards or away from the observer. As a planet orbits a star, it pulls the star in a small, regular circle around the center of mass of the planet-star system.The period of the velocity curve can be used to determine the planet's orbital period and distance.

If the velocity curve has a period of 6 months, the planet's orbital period is also 6 months. Kepler's third law can then be used to determine the planet's orbital distance.

According to Kepler's third law, the square of a planet's orbital period is proportional to the cube of its orbital distance. P² α a³  where P is the orbital period and a is the orbital distance.

Thus, a² ∝ P²/3a² = 1 AU (since P = 6 months).

Therefore, we can conclude that the planet's orbital distance is 1 AU.

To know more about Doppler method refer here :

https://brainly.com/question/15318474

#SPJ11

Answer:

F=Gm1m2/r^2



Explanation:

The work done by the horizontal force is found to be 60J and the work done by the gravity and the normal force is 0J.

The horizontal force that is applied is 20N and the mass of the box is 5.0 Kg and the force moves the box with a constant speed till a distance of 3.0m.

Now, first understand the work and force relation,

W= Fs.cosA, where, W is work, F is applied force, A is the angle between force and distance s.

For (a) and (b),

The work done by the gravity and the normal force on the block will be ) J because the angle A = 90 degrees.

(c). The work done by the horizontal force is given by the above formula by putting all the values, The value of the angle A is 0 degrees and the value of cos(0) = 1.

W = (20)(3)

W = 60J

So, the work done by the horizontal force is 60J.

To know more about Work done, visit,

https://brainly.com/question/8119756

#SPJ4

The total work done by the 40.0-kg child pushing the wagon 1.50 m up a ramp at an angle of 14.0 degrees with the horizontal is 106.6 J. This includes the work done both on the body and the crate.

To solve this problem, we must first calculate the work done on the body of the child. This can be done using the equation W = F×d×cos θ where F is the force exerted by the child, d is the distance the wagon is pushed, and θ is the angle of the ramp.

In this case, F = 175 N, d = 1.50 m, and θ = 14.0°. So, the work done on the body is:

W = 175 N × 1.50 m × cos 14.0°

= 67.9 J

Now, we must calculate the work done on the crate. This can be done using the equation W = F×d×sin θ, where F, d, and θ are the same values as above.

So, the work done on the crate is:

W = 175 N × 1.50 m × sin 14.0°

= 38.7 J

Adding the work done on the body and the crate, the total work done by the child is 67.9 J + 38.7 J = 106.6 J.

For more information about the work refers to the link: https://brainly.com/question/30346539

#SPJ11

Answer:

To investigate the relationship between how far the spring is stretched and how much elastic potential energy is stored in the system, we can conduct the following experiment:

Materials:

Spring

Meter stick

Weights of different masses

Stopwatch

Triple beam balance

Retort stand

Clamp

Procedure:

Set up a retort stand and attach a clamp to it.

Attach the spring to the clamp.

Place a meter stick vertically next to the spring to measure the distance it is stretched.

Measure and record the natural length of the spring (when no weight is attached).

Add a known mass to the end of the spring and record the new length of the spring.

Calculate the difference between the stretched length and the natural length of the spring.

Repeat steps 5 and 6 for different masses.

Record the time taken for the spring to stretch when the mass is added.

Calculate the elastic potential energy stored in the spring for each mass added, using the formula:

Elastic potential energy = 1/2 x k x (distance stretched)^2

where k is the spring constant of the spring.

Plot a graph of the elastic potential energy stored against the distance stretched for each mass added.

Analyze the relationship between the distance stretched and the elastic potential energy stored.

By measuring the distance stretched and the time taken for the spring to stretch, we can calculate the velocity of the mass and use this to determine the elastic potential energy stored in the spring. By repeating this process for different masses and plotting a graph, we can determine if there is a linear relationship between the distance stretched and the elastic potential energy stored. This investigation will help to better understand the concept of elasticity and its relationship to potential energy.

The final angular velocity of the disk-clay system after the collision is approximately 1.67 rpm.

To find the angular velocity in rpm after the collision, we can use the principle of conservation of angular momentum.

Since the disk is initially at rest, the initial angular momentum is zero. After the clay sticks to the edge of the disk, the system will be a combination of the clay and the disk, which will rotate together with some final angular velocity.

The angular momentum of the system is given by the formula:

L = Iω

where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.

Since the system is rotating about an axis perpendicular to the disk, the moment of inertia of the system can be calculated as:

[tex]I = I_{disk} + I_{clay}[/tex]

where I_disk is the moment of inertia of the disk and I_clay is the moment of inertia of the clay. The moment of inertia of a solid disk rotating about an axis through its center is given by:

[tex]I_{disk} = (\frac{1}{2} )MR^2[/tex]

where M is the mass of the disk and R is the radius of the disk. Substituting the given values, we get:

[tex]I_{disk }= (\frac{1}{2} )(2.0 kg)(0.15 m)^2 = 0.0225 kg m^2[/tex]

The moment of inertia of the clay can be approximated as that of a solid sphere rotating about an axis through its center, given by:

[tex]I_{clay} = (\frac{2}{5} )MR^2[/tex]

where M is the mass of the clay and R is its radius. Substituting the given values, we get:

[tex]I_{clay} = (\frac{2}{5} )(0.050 kg)(0.05 m)^2 = 0.000125 kg m^2[/tex]

Therefore, the total moment of inertia of the system is:

[tex]I = I_{disk} + I_{clay} = 0.0225 kgm^2 + 0.000125 kgm^2 = 0.022625 kgm^2[/tex]

The final angular momentum of the system is:

L = Iω

where ω is the final angular velocity of the system. Before the collision, the clay is moving tangent to the disk, so its velocity is perpendicular to the line joining its center and the centre of the disk.

Therefore, the angular momentum of the clay is zero. After the collision, the clay sticks to the edge of the disk, which acquires the angular momentum of the clay. Therefore, the angular momentum of the system after the collision is:

[tex]L = I\omega = (0.000125 kgm^2)(10 m/s) = 0.00125 kgm^2/s[/tex]

Setting the initial and final angular momenta equal, we can solve for the final angular velocity:

L_initial = L_final

[tex]0 = (0.022625 kg m^2) \times 0 + (0.000125 kgm^2 + 0.0225 kgm^2) \times \omega[/tex]

Solving for ω, we get:

ω = 0.00556 rad/s

Finally, we can convert the angular velocity to rpm:

[tex]\omega_{rpm} = \frac{\omega \times 60}{2\pi} = \frac{0.00556 rad/s \times 60}{2\pi} \approx 1.67 rpm[/tex]

The angular velocity in rpm, after the collision is 1.67 rpm.

For more details about collision click here:

https://brainly.com/question/13138178#

#SPJ11

At some distance away from a long, straight current carrying wire, the magnetic field points perpendicular to the wire. This is known as the right-hand rule, which is used to determine the direction of the magnetic field in relation to the direction of the current flow.

A long, straight current-carrying wire produces a magnetic field, and the direction of the field is determined by the right-hand rule. This rule states that if you wrap your right hand around the wire in such a way that your thumb points in the direction of the current, your fingers will point in the direction of the magnetic field.

The direction of the magnetic field can also be determined by the direction of the current flow. The field is perpendicular to the wire and circular around the wire. This means that the field lines of the magnetic field are circular around the wire, and they point in the direction of the current flow.

For more such questions on Magnetic field.

https://brainly.com/question/1433300#

#SPJ11

Answer:incidence

Explanation: Because it depends on incident

The impulse delivered to the superball is greater than the impulse delivered to the clay.

Impulse refers to the change in momentum of an object when a force is applied to it over a certain period of time. Impulse (J) is given by the equation:

J = F × Δt

J = Δp

Where: J is the impulse,

F is the force applied to the object, and

Δt is the time interval over which the force acts.

Δp is the change in momentum

So, the change in momentum for the clay takes a larger time than for the superball. Thus for the same force, a larger impulse has to be imparted to superball than clay.

Therefore, the impulse delivered to the superball is greater than the impulse delivered to the clay.

To know more about impulse, click here:

https://brainly.com/question/16980676

#SPJ12