Using a standard deck of cards, Rayna drew one card and recorded its value. She continued this for a total of 200 draws. The table shows the frequency of each card drawn.


Card A 2 3 4 5 6 7 8 9 10 J Q K
Frequency 8 12 11 17 14 12 15 18 13 20 16 24 20


Based on the table, what is the experimental probability that the card selected was a 2, 3, or 4?

According to the question this equation represents a single point in the xy-plane, and does not have a constant rate of change. It doesn't have a linear function as a result.

When the roots and solutions of two equations match, they are said to be equivalent. The same number, symbols, or expression must be added to or subtracted from both the equation's two sides to produce an equivalent equation. By multiplying or dividing both sides of an equation by a nonzero number, we can also obtain an analogous equation.

Equation representing a linear function:

Y is equivalent to x plus 5 times the negative one-fourth.

Linear functions have a constant rate of change, which means that as x increases or decreases by a certain amount, y also changes by a constant amount. The equation y equals negative one fourth times x plus 5 has a constant slope of negative one fourth, which means that for every increase of one in x, y will decrease by one fourth. This is a characteristic of a linear function.

The equation y equals two thirds times x squared represents a quadratic function, which has a curved graph.

The equation x = 5 is a linear equation, but it only represents a vertical line passing through x = 5. It does not have a slope or a y-intercept, which are necessary for a linear function.

The equation 2x + 7 = 12 can be simplified to a linear equation of the form y = mx + b by solving for y:

2x + 7 = 12

2x = 5

x = 5/2

Substituting x = 5/2 back into the equation gives:

y = 2(5/2) + 7 = 12

This equation represents a single point in the xy-plane, and does not have a constant rate of change. Therefore, it is not a linear function.

To know more about equation visit:

https://brainly.com/question/2972832

#SPJ1

Using trigonometric relations we can see that u = 4.28m

First we can find the length of the shared side using the trigonometric relation:

tan(56°) = x/1.65m

1.65m*tan(56°) = x

2.45m = x

Then the length of the bottom side of the right triangle in the right side is iven by:

tan(43°) = 2.45m/y

Solving for y:

y =  2.45m/tan(43°)

y = 2.63m

Then the length of u is:

u = 1.65m + 2.63m = 4.28m

Learn more about right triangles at:

https://brainly.com/question/2217700

#SPJ1

Answer:

13

Step-by-step explanation:

(6^8)(10^3)(8^2)(25^5)=1049760000000000000

so 13 zeros after 104976

The statement that would be true of the reflection of the existing fountain across the y - axis is B. There are two sets of parallel lines: T'V' || R'U' and T'R' ||  V'U'

A reflection of a shape would lead to a congruent shape in another part of the graph. This means that the new shape would have the same set of parallel lines as the original.

The quadrilateral TRUV had parallel line sets of TV || RU and TR || VU so the reflected figure would have congruent parallel lines at T'V' || R'U' and T'R' ||  V'U'.

Find out more on reflection at https://brainly.com/question/29788009

#SPJ1

The options for the question are:

There are two sets of parallel lines: TV VU and TR || R'U

There are two sets of parallel lines: T'V' || R'U' and T'R' ||  V'U'

The points T. R, U, and V have these coordinates: (-2,-7),(6,7),(-2,-4)

.and (-6,-4).

The points T. R. U, and V have these coordinates: (2,-7), (6,7),(2,-4) and (6,-4)

In Circuit B, the ammeter is connected in series with resistor R1 and the voltmeter is connected in parallel with resistor R2.

Therefore, the circuit is correctly setup to measure the desired quantities.

The correct circuit for measuring the current through resistor R1 and the potential difference across R2 is Circuit B. Circuit B is formatted with an ammeter measuring the current through R1 and a voltmeter measuring the potential difference across R2.

An ammeter is used to measure current and should be connected in series with the component it is measuring; whereas a voltmeter is used to measure potential difference and should be connected in parallel with the component it is measuring.

for such more questions on correct circuit

https://brainly.com/question/16511109

#SPJ11

The given information says that the number of calls coming to the customer care center of a mobile company per minute is a Poisson random variable with a mean of 5, So the probability that no call comes in a certain minute is 1

                 A Poisson distribution is a probability distribution that shows the probability of a certain number of events occurring within a specific time or space, provided that these events occur at an average rate that is constant throughout the space or time.

             Given a Poisson random variable with mean λ, the probability of observing x occurrences of an event in a certain time interval is given by:

                          P(X = x) = (e^(-λ) * λ^x) / x!,

             where e is Euler's number (approximately equal to 2.71828).

We are required to find the probability that no call comes in a certain minute, i.e., P(X = 0).

Substituting the given values into the Poisson distribution formula:

                     P(X = 0) = (e^(-5) * 5^0) / 0!

                                   = (1 * 1) / 1

                                   = 1

    Therefore, the probability that no call comes in a certain minute is 1.

Learn more about Poisson random variable with a mean at: https://brainly.com/question/9123296

#SPJ11

We know that the temperature was 56°F at midnight, so we can plot the point (24, 56)

What is graph ?

Graph can be defined as visual representation of given data using the ordered pairs.

To graph Elroy's data, we can use the x-axis to represent the time of day in hours and the y-axis to represent the temperature in degrees Fahrenheit.

First, we can plot the point (6, 50) to represent the temperature at 6am.

Next, we can use the information that the temperature rose 3° per hour for the next 4 hours. This means that at 10am, the temperature would be 50 + 3(4) = 62°F. We can plot this point at (10, 62). Similarly, we can find the temperature at 7am, 8am, and 9am using the same formula and plot those points as well.

Then, we can use the information that the temperature rose 2° per hour for the next 6 hours. This means that at 4pm, the temperature would be 62 + 2(6) = 74°F. We can plot this point at (16, 74). Similarly, we can find the temperature at 11am, 12pm, 1pm, 2pm, and 3pm using the same formula and plot those points as well.

The temperature then stayed steady until 6pm, so we can draw a horizontal line at y = 74 from 4pm to 6pm.

For the next 2 hours, the temperature dropped 1° per hour. This means that at 8pm, the temperature would be 74 - 2 = 72°F. We can plot this point at (20, 72). Similarly, we can find the temperature at 7pm using the same formula and plot that point as well.

Therefore,  we know that the temperature was 56°F at midnight, so we can plot the point (24, 56).

To learn more about Graph from given link.

https://brainly.com/question/17267403

#SPJ1

We calculate that the probability of selecting an unripe cherry and an apple is roughly 6.22%.

To estimate the probability that you pick an apple that is ripe and a cherry that is not ripe, we can use a simulation. Here's one way to do it:

622 / 10,000 = 0.0622, or approximately 6.22%.

Therefore, based on this simulation, we estimate that the probability of picking a ripe apple and a cherry that is not ripe is approximately 6.22%. Note that the actual probability may be slightly different due to the random nature of the simulation.

To learn more about probability click here

brainly.com/question/30034780

#SPJ4

Answer:

25.92cm²

Step-by-step explanation:

First, do 2.4x3.6=8.64

then multiply by length so 8.64x6=25.92

Hope this helps

There are 100,000 possible five-digit student ID numbers that can be created if repeat digits are allowed (10^5).

However, if repeats are not allowed, there are only 9 x 9 x 9 x 9 x 9 = 590,490 possible student ID numbers that can be created (9^5).

The reason for the difference is that when repeats are allowed, you can use the same digit multiple times, for example "11111".

When repeats are not allowed, you can only use each digit once, for example "12345". The possible permutations of the digits 0-9 increase as more digits are added to the ID number, meaning that the more digits there are, the more possible combinations there are.

Therefore, when repeats are not allowed, the number of possible combinations is reduced significantly. In the case of five-digit student ID numbers, the difference is almost twofold.

To know more about combinations click on below link:

https://brainly.com/question/20211959#

#SPJ11

The mass of a 2018 Olympic gold medal in hectograms is 58.6 hg.

First, we need to know the mass of the Olympic gold medal in grams. According to the question, the mass of an Olympic gold medal is 586 grams.

To convert grams to hectograms, we need to divide the mass in grams by 100. This is because there are 100 grams in 1 hectogram.

To do the division, we can use a calculator. Dividing 586 by 100 gives us 5.86.

The answer we get is in hectograms, so we can write it as 5.86 hg. This means that the mass of a 2018 Olympic gold medal is 5.86 hectograms.

To know more about hectograms, refer here:

https://brainly.com/question/1058206#

#SPJ11

Answer:

Step-by-step explanation:

The solution of the system of equations are (7,-5).

The system of equations:

2x + 6y = -16 and  -6x - 3y = -27

2x + 6y = -16

Divide by 2

x + 3y = -8  ..eq 1

-6x - 3y = -27 ..eq 2

Use elimination method.

Add eq 1 from 2

x + 3y -6x -3y = -8 - 27

-5x = -35

x = 7

3y = -8 - 7

y = -15/3

y = -5

Thus, the solution of the  system of equations are (7, -5).

Know more about the system of equation

https://brainly.com/question/25976025

#SPJ1

Therefore , the solution of the given problem of angles comes out to be the right response is option d 122°.

Using Cartesian coordinates, the top and bottom walls divide the circular lines that make up a skew's ends. There is a chance that two poles will meet at a junction point. Angle is another outcome of two things interacting. They mirror dihedral forms the most. A two-dimensional curve can be created by arranging two line beams in various ways at their extremities.

Here,

180 degrees is the length of a straight circle. It has been split into a 58-degree angle and an unidentified angle, as far as we are aware. So that we can determine the size of the undetermined angle, let's use subtraction:

=> Angle unknown = 180 degrees minus 58 degrees

=> Angle unknown = 122 degrees

As a result, the undetermined angle is 122° in size.

The right response is (d) 122°.

To know more about angles visit:

https://brainly.com/question/14569348

#SPJ1

Benzoic acid is used to determine the heat capacity of bomb calorimeters because it can be obtained in pure form and its energy of combustion is known very accurately (-26.43 kJ/g).

The calorimeter constant is -2873.5.

Determine the calorimeter constant of the calorimeter that had a temperature increase of 9.199 degrees Celsius when 3.500 g of benzoic acid was used.To determine the calorimeter constant, follow these steps:

Explanation:

1. Calculate the energy released by the benzoic acid combustion: Multiply the mass of benzoic acid by its energy of combustion.
Energy released = mass × energy of combustion
Energy released = 3.500 g × -26.43 kJ/g = -92.505 kJ

2. Convert the temperature increase to a change in energy: Multiply the temperature increase by the mass of benzoic acid.
ΔEnergy = temperature increase × mass of benzoic acid
ΔEnergy = 9.199°C × 3.500 g = 32.1965 J

3. Determine the calorimeter constant: Divide the energy released by the change in energy.
Calorimeter constant = Energy released / ΔEnergy
Calorimeter constant = -92.505 kJ / 32.1965 J

Note: We need to convert the units to be consistent, either to J or kJ.
1 kJ = 1000 J, so -92.505 kJ = -92505 J.

Calorimeter constant = -92505 J / 32.1965 J = -2873.5

The calorimeter constant is -2873.5.

To know more about calorimeter :

https://brainly.com/question/4802333

#SPJ11

Population will be 43,160 in 76 years if a town doubles its size every 38 years if the current population is 6,790.

Since the town doubles in size every 38 years, we can use the formula:

P = P0 * 2^(t/T)

where P0 is the initial population, P is the population after time t, and T is the doubling time (38 years in this case).

We know that the current population is P0 = 6,790, and we want to find the population in 76 years, which is t = 76. Plugging these values into the formula, we get:

P = 6,790 * 2^(76/38)

P = 6,790 * 2^2

P = 6,790 * 4

P = 27,160

Therefore, the population of the town will be 27,160 in 76 years.

To know more about time refer here:

https://brainly.com/question/15356513#

#SPJ11

If one of the 619 residents is selected at random, the probability they have experienced delays is 70.6%.

To find the probability that a randomly selected Salinas resident has experienced significant traffic delays within the last month, we need to use the formula for probability:

Probability = Number of favorable outcomes / Total number of outcomes

In this case, the favorable outcome is the number of residents who have experienced significant traffic delays, which is 437. The total number of outcomes is the total number of residents surveyed, which is 619. Therefore, the probability is:

Probability = 437 / 619 ≈ 0.706

This means that there is a 70.6% chance that a randomly selected Salinas resident has experienced significant traffic delays within the last month, based on the given survey results.

To learn more about probability click on,

https://brainly.com/question/23161537

#SPJ4

answer - y = -5x + 1

Answer:

q=5,R=2

Step-by-step explanation:

=5×2+(2×5-10)

=10+(10-10)

=10+0

=10

The formula to calculate interest charge when the musician does not make any payments for one month is Interest = Principal * Rate * Time. Using the given values, the interest charge for the first month is $97.15, making the total owed amount at the end of the first month $2,997.15.

If the musician does not make any payments for one month, the amount owed will accumulate interest. To calculate the interest charge, we can use the following formula:

Interest = Principal * Rate * Time

where the principal is the initial amount owed, the rate is the monthly interest rate as a decimal, and the time is the time period in months.

In this case, the principal is $2,900, the monthly interest rate is 3.35% expressed as a decimal (0.0335), and the time is one month.

So, the interest charge for the first month will be:

Interest = $2,900 * 0.0335 * 1

Interest = $97.15

Therefore, at the end of the first month, the musician will owe the initial balance of $2,900 plus the interest charge of $97.15, for a total of $2,997.15.

Learn more about interest rates here: brainly.com/question/14540021

#SPJ4

If your grade is 88 but you have a test that counts for 25 percent of your total grade and you get an 80, your grade will be 86.

Test scores are an essential aspect of an educational system. Teachers use them to evaluate how well students have grasped concepts or learned material from a class or course. They help in establishing the academic strength and weaknesses of the student.

The test score you got is 80, which makes 25% of the total grade you can have for this course. This means that 0.25*80 = 20 marks will be added to your final grade. Your previous grade was 88, which will not be counted with the test marks.

Hence the marks you will have for the final grade will be 88 + 20 = 108. Divide this number by 1.25 (as 25% is equivalent to 0.25), which results in 86.4. You can round it off to the nearest integer, which is 86.

Therefore, your final grade will be 86.

To know more about total grade refer here:

https://brainly.com/question/21017787#

#SPJ11

The function f a. f(0) represents the bonds after 0 years. That is the immediate value of bond in dollars at 0 year. b. f(4.5) represents the value of the bond 4.5 years later.

A function in mathematics is a rule that designates a certain output value for each input value. Each input from the domain has precisely one output in the range, forming a relationship between two sets known as the domain and the range. The letter f(x), where x is the input variable and f(x) is the output variable, is a common way to represent a function. The output variable is specified by the function's rule, but the input variable can accept any value from the function's domain.

For the given graph of the function:

a. f(0) represents the bonds after 0 years. That is the immediate value of bond in dollars at 0 year.

b. f(4.5) represents the value of the bond 4.5 years later.

Learn more about function here:

https://brainly.com/question/12431044

#SPJ1

Answer:

3√5

Step-by-step explanation:

The distance from the bottom of the building to the point where the ladder is touching the building for Triangle 2 is 14 feet.

What is triangle?

A triangle is a polygon with three sides and three angles. It is one of the most basic geometric shapes and is often used in geometry, trigonometry, and other branches of mathematics.

Since Triangle 1 and Triangle 2 are similar right triangles formed from the same ladder leaning against the same building, their corresponding sides are proportional to each other.

Let's use the concept of similarity and proportions to solve for the unknown distance in Triangle 2. We can set up the following proportion based on the corresponding sides of the two triangles:

(vertical leg of Triangle 1) : (horizontal leg of Triangle 1) = (vertical leg of Triangle 2) : (horizontal leg of Triangle 2)

We know that in Triangle 1:

the length of the hypotenuse (the ladder) is 16 feet

the length of the horizontal leg (the distance along the ground) is 8 feet

the length of the vertical leg (the distance from the bottom of the building to the point where the ladder is touching the building) is 16 feet

Using the Pythagorean Theorem, we can solve for the length of the vertical leg of Triangle 2:

(vertical leg of Triangle 1) : (horizontal leg of Triangle 1) = (vertical leg of Triangle 2) : (horizontal leg of Triangle 2)

16 : 8 = (vertical leg of Triangle 2) : 7

Simplifying the proportion, we get:

2 : 1 = (vertical leg of Triangle 2) : 7

To solve for the vertical leg of Triangle 2, we can multiply both sides of the proportion by 7:

2 * 7 : 1 * 7 = (vertical leg of Triangle 2)

14 : 1 = (vertical leg of Triangle 2)

Therefore, the distance from the bottom of the building to the point where the ladder is touching the building for Triangle 2 is 14 feet.

To learn more about triangle visit:

https://brainly.com/question/1058720

#SPJ1

The parameters a, b, and c of a quadratic function model have different real-world meanings that relate to the specific context of the data being analyzed. In the case of the quadratic function model used to analyze the amount of money spent on prescription drugs per capita between 1990 and 2003.

The parameters can be defined as follows:

a: The parameter a represents the coefficient of the squared term in the quadratic function model. In the context of the amount of money spent on prescription drugs per capita, a represents the curvature of the relationship between time and spending.

A positive value of a indicates a U-shaped curve, while a negative value of a indicates an inverted U-shaped curve.

b: The parameter b represents the coefficient of the linear term in the quadratic function model. In the context of the amount of money spent on prescription drugs per capita, b represents the rate of change of spending over time.

A positive value of b indicates that spending is increasing over time, while a negative value of b indicates that spending is decreasing over time.

c: The parameter c represents the intercept of the quadratic function model. In the context of the amount of money spent on prescription drugs per capita, c represents the initial amount of spending at the beginning of the time period being analyzed.

Hence, a represents the curvature of the relationship between time and spending, b represents the rate of change of spending over time, and c represents the initial amount of spending at the beginning of the time period.

To know more about quadratic function model, refer here:

https://brainly.com/question/28863338#

#SPJ11

A sample size of 1068 is needed with a 95% confidence level and a 3% margin of error to estimate the proportion of people who support a political candidate.

To determine the sample size needed to estimate the percentage of people who support the political candidate with a 3% margin of error at a 95% confidence level, we can use the formula:

n = (z^2 * p * (1 - p)) / (E^2)

where n is the sample size, z is the z-value corresponding to the desired confidence level (95% confidence level corresponds to z = 1.96), p is the estimated proportion of the population that supports the candidate (we can use 0.5 as a conservative estimate), E is the desired margin of error (3% or 0.03)

Substituting the values into the formula, we get:

n = (1.96^2 * 0.5 * (1 - 0.5)) / (0.03^2) = 1067.11

Rounding up to the nearest integer, we need a sample size of 1068 to estimate the percentage of people who support the political candidate with a 3% margin of error at a 95% confidence level.

To know more about confidence interval:

https://brainly.com/question/24131141

#SPJ4

Using a constant factor, the number that completes the ratio table is calculated as: A. 64.

To complete the ratio table, we can observe that each number in the second row is obtained by multiplying the corresponding number in the first row by a constant factor of 8.

Thus, the ratio of the first row number to the second row number is 1:8.

This means that:

2 * 8 = 16

13 * 8 = 104

8 * 8 = 64.

Therefore, we can also get the correct number that completes the ratio table by multiplying 8 by 8, which is:

8 * 8 = 64.

So, the missing number in the ratio table is: A. 64.

Learn more about ratio on:

https://brainly.com/question/13513438

#SPJ1

Answer:

150 handshakes

Step-by-step explanation:

50+50=100 Since the girls shook ONCE to a boy and a girl, we would multiply 100 twice, then add another 50.

The given image is trapezoid and to obtain the image there are two different ways: 1. Plotting the points 2. Transformations

What is trapezoid?

In geometry, a trapezoid is a four-sided polygon that has at least one pair of parallel sides. The parallel sides of a trapezoid are called bases, while the non-parallel sides are called legs.

The image below appears to be a trapezoid with vertices at A(2,2), B(4,5), C(6,5), and D(8,2). There are several ways to obtain this image, but here are two possible methods:

Method 1: Plotting the Points

One way to obtain the image is to plot the points A, B, C, and D on a coordinate plane, and then connect them in the correct order to form the trapezoid. Here are the steps:

Draw a coordinate plane with x and y axes.

Plot the point A at (2,2).

Plot the point B at (4,5).

Plot the point C at (6,5).

Plot the point D at (8,2).

Connect the points A, B, C, and D in the order ABDC to form the trapezoid.

Method 2: Transformations

Another way to obtain the image is to start with a reference trapezoid with known vertices, and then apply a sequence of transformations to obtain the desired trapezoid. Here are the steps:

Start with a reference trapezoid with vertices at (0,0), (2,3), (4,3), and (6,0). This trapezoid has the same shape as the desired trapezoid, but is located in a different position on the coordinate plane.

Translate the reference trapezoid 2 units to the right and 2 units up by adding (2,2) to each vertex. This results in a trapezoid with vertices at (2,2), (4,5), (6,5), and (8,2), which is the desired trapezoid.

(Optional) Rotate or reflect the trapezoid as desired to obtain different orientations or symmetries.

To learn more about trapezoid visit:

https://brainly.com/question/1410008

#SPJ1

The total 2-way variable achieved by the given tests is 6.

How to find 2-way variable?

There are three pairs of variables, and each pair can have two possible values, resulting in 2-way variable value configurations. Therefore, the total 2-way variable value configuration coverage achieved by the given tests is 6, as follows:

A=0, B=0

A=0, C=1

B=0, C=1

A=0, B=1

A=1, B=0

A=1, C=0

Learn more about 2-way variable

brainly.com/question/29435977

#SPJ11