The matchup are:
Acid with the highest electrical conductivity: HCl(aq)Acid which could also be a base according to the Modified Arrhenius Theory: H2O(aq)Polyprotic acid: H2CO3(aq)Ionizes at a rate of 2 ppb: HCOOH(aq)What are the acids?Acid with the highest electrical conductivity:
HCl(aq) has the highest electrical conductivity among common acids because it completely dissociates into H+ and Cl- ions in water, making it a strong acid. This means that it can conduct electricity very effectively in solution.Acid which could also be a base according to the Modified Arrhenius Theory:
The Modified Arrhenius Theory defines an acid as a substance that donates protons (H+) in solution, and a base as a substance that accepts protons. While H2O(aq) is commonly thought of as a neutral substance, it can actually act as an acid or a base in certainNote: H2O(aq) is amphoteric, meaning it can act as an acid or a base according to the Modified Arrhenius Theory. H2CO3(aq) is a polyprotic acid, meaning it can donate multiple protons in a stepwise manner. HCOOH(aq) has a very low ionization constant, meaning it ionizes at a very slow rate compared to other acids.
Read more about acids here:
https://brainly.com/question/25148363
#SPJ1
What mass of solid CH2Cl2 can be melted by applying 7. 80 kJ of energy at the melting point?
grams (3 sig figs)
The mass of CH2Cl2 that can be melted by applying 7.80 kJ of energy at the melting point can be calculated using the equation of q = m * c * ΔT, where q is the energy applied, m is the mass, c is the heat capacity, and ΔT is the difference between the final and initial temperatures. In this case, the mass can be calculated as m = q / (c * ΔT). Plugging in the given values yields a mass of 0.126 g, rounded to three significant figures.
Therefore, 7.80 kJ of energy can melt 0.126 g of solid CH2Cl2 at the melting point. The equation used for this calculation assumes that the heat capacity and melting point of CH2Cl2 remain constant throughout the process, and thus the calculated value is only an estimate.
Know more about Melting point here
https://brainly.com/question/29578567#
#SPJ11
a student is asked to transfer 0.03 ml of a concentrated solution in order to accurately dilute the solution to 0.020 m. which measuring tool would you choose to obtain the needed volume of the original concentrated solution?
To accurately measure a very small volume of liquid like 0.03 ml, a micropipette would be the most appropriate measuring tool to use.
What is micropipette?A micropipette is a laboratory instrument commonly used in biology, chemistry, and other related fields to accurately and precisely measure and transfer small volumes of liquids. It typically operates through a piston-driven air displacement system, allowing for very precise measurements in the microliter (μL) or even nanoliter (nL) range.
Micropipettes are commonly used in applications such as DNA sequencing, PCR, and protein assays, where precise and accurate liquid handling is essential for accurate results.
Find out more on micropipette here: https://brainly.com/question/28425080
#SPJ1
If the molal concentration in water is the same for the following substances, rank these solutions in decreasing melting point. Highest placed in the rank will have the highest melting point.
calcium phosphate, Ca3(PO4)2
glucose, c6h12o6
sodium chloride, NaCl
magnesium chloride, MgCl2
The ranking of these solutions in decreasing melting point is: calcium phosphate > magnesium chloride > sodium chloride > glucose.
To rank the solutions with the same molal concentration in decreasing order of their melting points, we need to consider their van't Hoff factor (i), which represents the number of particles a solute dissociates into when dissolved in water. The formula to calculate the effect of a solute on the melting point of a solution is ΔTf = Kf × m × i, where Kf is the cryoscopic constant of water, m is the molality, and i is the van't Hoff factor.
Here are the van't Hoff factors for each substance:
1. Calcium phosphate, Ca₃(PO₄)₂: This substance dissociates into 5 ions (3 Ca²⁺ + 2 PO₄³⁻), so i = 5.
2. Glucose, C₆H₁₂O₆: This substance is a molecular compound and does not dissociate into ions, so i = 1.
3. Sodium chloride, NaCl: This substance dissociates into 2 ions (Na⁺ + Cl⁻), so i = 2.
4. Magnesium chloride, MgCl₂: This substance dissociates into 3 ions (Mg²⁺ + 2 Cl⁻), so i = 3.
Using the van't Hoff factor, we can rank the solutions in decreasing order of their melting points:
1. Calcium phosphate, Ca₃(PO₄)₂ (i = 5)
2. Magnesium chloride, MgCl₂(i = 3)
3. Sodium chloride, NaCl (i = 2)
4. Glucose, C₆H₁₂O₆ (i = 1)
So, the ranking of these solutions in decreasing melting point is: calcium phosphate > magnesium chloride > sodium chloride > glucose.
To know more about van't Hoff factors :
https://brainly.com/question/30905748
#SPJ11
What is the ph of a solution that has a poh of 9.1
The pH of the solution is 4.9.
The pH and pOH of a solution are related by the equation:
pH + pOH = 14
Therefore, if the pOH of a solution is 9.1, we can calculate its pH as:
pH = 14 - pOH
pH = 14 - 9.1
pH = 4.9
So, the pH of the solution is 4.9. The pH scale is a logarithmic scale that measures the acidity or basicity of a solution. A pH of 7 is neutral, while a pH below 7 is acidic and a pH above 7 is basic. In this case, the pH is below 7, which means the solution is acidic.
To know more about acidity, here
brainly.com/question/11543614
#SPJ4
If i contain 3. 15 moles in a container with a volume of 67 liters and at a temperature Of 472 K what is the pressure
Answer:1.8
Explanation:
=nrt/v
P=(3.15)(.0821)(472)/67
P=1.82atm
Help what’s the answer
The limiting reagent is F₂, the number of OF₂ molecules formed is 2 and the number of F₂ atoms/molecules in excess is 2.
How to determine limiting reagent?Since there are two oxygen molecules and four fluorine molecules, fluorine is in excess.
The balanced equation is O₂ + 2 F₂ → OF₂, which shows that 1 molecule of O₂ reacts with 2 molecules of F₂ to form 2 molecules of OF₂. Therefore, since there are only 2 molecules of F₂ available, the limiting reagent is F₂.
As F₂ is the limiting reagent, only 1 molecule of O₂ will react with 2 molecules of F₂ to form 2 molecules of OF₂. Therefore, the number of OF₂ molecules formed is 2.
The number of atoms/molecules in excess is the difference between the number of atoms/molecules available and the number of atoms/molecules used in the reaction. In this case, since F₂ is in excess, the number of F₂ molecules in excess is 2.
Find out more on limiting reagents here: https://brainly.com/question/14222359
#SPJ1
Image transcribed:
Use the References to access important values if needed for this question.
The illustration to the left represents a mixture of oxygen (red) and fluorine (green) molecules.
If the molecules in the above illustration react to form OF₂ according to the equation
O₂ + 2 F₂ → OF₂,
the limiting reagent is _______, the number of OF₂ molecules formed is ______ and
the number of ______ atoms/molecules in excess is ________.
How many grams are in a sample of 7.9 moles of zinc?
There are 516.682 grams in a sample of 7.9 moles of zinc.
To determine the number of grams in a sample of 7.9 moles of zinc, we need to use the molar mass of zinc. The molar mass of zinc is 65.38 g/mol.
Therefore, to calculate the number of grams in 7.9 moles of zinc, we can multiply 7.9 moles by 65.38 g/mol. The calculation is as follows:
7.9 moles x 65.38 g/mol = 516.682 g
Therefore, there are 516.682 grams in a sample of 7.9 moles of zinc. It's important to remember to always use the molar mass of the element or compound when converting between moles and grams.
To know more about moles refer here: https://brainly.com/question/31563792#
#SPJ11
how does backbone help?
Answer:
Backbone help us to be straight ,walk ,sleep etc
Explanation:
Backbone is the part of human body which is located back of our body.
It effort helps us to be straight do various work
The spine or the backbone is the central structure of the vertebrate body and it serves a few imperative capacities:
Bolster: The spine gives bolster for the body and makes a difference keep up its shape.Security: The spine encases and ensures the spinal rope, which is mindful for transmitting signals between the brain and the rest of the body.Connection: Muscles, tendons, and ligaments join to the spine, permitting for development and giving steadiness.Blood cell generation: The springy tissue interior a few of the bones of the spine produces ruddy and white blood cells.Mineral capacity: The bones of the spine store minerals such as calcium and phosphorus, which are imperative for bone quality and other substantial capacities.To know more about backbone,
https://brainly.com/question/30052045
An ethanol plant distills alcohol from corn. The distiller processes 2. 0 t/h of feed containing 15% alcohol and 82% water; the rest is inert material. The bottoms (waste) produced is 85% of the feed and contains 94% water, 3. 5% inert material, and 2. 5% alcohol. The vapor (product) from the top of the distiller is passed through a condenser and cooled to produce the final product. Determine the rate of production of the final product and its composition
To determine the rate of production of the final product and its composition, we can start by calculating the mass balance for the alcohol in the system.
Given:
Feed rate = 2.0 t/h
Alcohol content in the feed = 15%
Water content in the feed = 82%
Bottoms composition: 94% water, 3.5% inert material, and 2.5% alcohol
We can assume that the inert material remains constant throughout the process, so we only need to consider the alcohol and water components.
Calculation of alcohol mass in the feed:
Alcohol mass in feed = Feed rate * Alcohol content
= 2.0 t/h * 0.15
= 0.3 t/h
Calculation of water mass in the feed:
Water mass in feed = Feed rate * Water content
= 2.0 t/h * 0.82
= 1.64 t/h
Calculation of alcohol mass in the bottoms:
Alcohol mass in bottoms = Alcohol mass in feed * Bottoms composition (alcohol)
= 0.3 t/h * 0.025
= 0.0075 t/h
Calculation of water mass in the bottoms:
Water mass in bottoms = Water mass in feed * Bottoms composition (water)
= 1.64 t/h * 0.94
= 1.5416 t/h
Calculation of alcohol mass in the product:
Alcohol mass in product = Alcohol mass in feed - Alcohol mass in bottoms
= 0.3 t/h - 0.0075 t/h
= 0.2925 t/h
Calculation of water mass in the product:
Water mass in product = Water mass in feed - Water mass in bottoms
= 1.64 t/h - 1.5416 t/h
= 0.0984 t/h
Therefore, the rate of production of the final product is 0.2925 t/h, and its composition is approximately 2.5% alcohol and 97.5% water.
To know more aboutproduction refer here
https://brainly.com/question/22852400#
#SPJ11
how do you read an electron dot diagram?
When reading an electron dot diagram, you can determine the number of valence electrons an atom has and use that information to predict how it will bond with other atoms. Atoms tend to form bonds in order to achieve a full outer shell of electrons, which is the most stable arrangement. By looking at the number of dots in the electron dot diagram, you can predict how many bonds an atom is likely to form and what types of atoms it will bond with.
To read an electron dot diagram, you first need to understand what it represents. An electron dot diagram, also known as a Lewis structure, shows the number of valence electrons that an atom has. Valence electrons are the electrons in the outermost energy level of an atom and are involved in chemical bonding.
The dot diagram shows the symbol for the element surrounded by dots representing the valence electrons. Each dot represents one electron, and the dots are placed around the symbol in pairs, with no more than two dots on each side.
For example, carbon has four valence electrons, so its electron dot diagram would show four dots surrounding the symbol for carbon. Nitrogen, on the other hand, has five valence electrons, so its electron dot diagram would show five dots.
For more such questions on electron
https://brainly.com/question/11316046
#SPJ11
A truck tire is filled with 1. 85 moles of gas at a pressure of 2. 1 atm and a temperature of 300 K. What is the volume of the gas in the tire?
The volume of the gas in the truck tire is approximately 44.2 L.
The ideal gas law equation can be used to solve for the volume of the gas in the tire:
PV = nRT
where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature of the gas.
Substituting the given values into the equation, we get:
(2.1 atm)(V) = (1.85 mol)(0.08206 L atm/mol K)(300 K)
Solving for V, we get:
V = (1.85 mol)(0.08206 L atm/mol K)(300 K)/(2.1 atm) ≈ 44.2 L
To know more about ideal gas law, refer here:
https://brainly.com/question/30458409#
#SPJ11
There is a transfer of chemical energy from producers to consumers. What is this chemical energy?.
The chemical energy referred to in the transfer from producers to consumers is the energy stored in the organic molecules synthesized by the producers during photosynthesis.
Producers, such as plants and algae, use energy from sunlight to convert carbon dioxide and water into glucose and other organic molecules through the process of photosynthesis. The energy from the sunlight is converted into chemical energy and stored in the organic molecules.
Consumers, such as herbivores and carnivores, obtain this stored chemical energy by consuming the organic molecules synthesized by the producers. The organic molecules are broken down during cellular respiration to release the stored chemical energy, which is used by the consumer to power its cellular processes.
Thus, the transfer of chemical energy from producers to consumers is a fundamental process in the food chain, and it is essential for the maintenance of life on earth.
To know more about photosynthesis refer to-
https://brainly.com/question/29764662
#SPJ11
0. 008 moles of C3H7OH contains how many atoms of carbon?
0.008 moles of C₃H₇OH contains 1.44528 x 10^22 atoms of carbon.
To find the number of carbon atoms in 0.008 moles of C₃H₇OH, follow these steps:
1. Identify the number of carbon atoms in one molecule of C₃H₇OH. In this case, there are 3 carbon atoms.
2. Calculate the total number of molecules in 0.008 moles of C₃H₇OH by multiplying the number of moles by Avogadro's constant (6.022 x 10^23 molecules/mol).
0.008 moles * (6.022 x 10^23 molecules/mol) = 4.8176 x 10^21 molecules
3. Multiply the total number of molecules by the number of carbon atoms in each molecule to find the total number of carbon atoms:
4.8176 x 10^21 molecules * 3 carbon atoms/molecule = 1.44528 x 10^22 carbon atoms
Learn more about moles at https://brainly.com/question/29367909
#SPJ11
Describe the following mixtures by checking all of the terms that apply.
Cranberry juice smoke
THESE ARE THE ANSWERS!!!!!
The appropriate term for the following mixtures are;
Cranberry juice: homogeneous, solution Smoke: heterogeneous, colloidWhat is a mixture?A mixture is a substance made when two or more substances are combined, but they are not combined chemically.
The components of a mixture can be easily separated because each component keep their original properties or identity.
A homogenous mixture is a gaseous, liquid or solid mixture that has the same proportions of its components throughout a given sample e.g. juice while heterogenous mixture is a mixture in which the composition is not uniform throughout the mixture e.g. smoke.
Learn more money mixtures at: https://brainly.com/question/30587533
#SPJ1
Answer:
Its in my screenshot
Explanation:
List three ways in which the octet rule can sometimes fail to be obeyed.
The three general exceptions to the octet rule is:
When Molecules, such as NO, with an odd number of electrons; When Molecules in which one or more atoms possess more than eight electrons like SF6.When Molecules like BCl3, in which one or more atoms possess less than eight electrons.What is the octet rule?The octet rule is described as a chemical rule of thumb that reflects the theory that main-group elements tend to bond in such a way that each atom has eight electrons in its valence shell, giving it the same electronic configuration as a noble gas.
The structure of the octet is usually held responsible for the relative inertness of the noble gases and the chemical behavior of certain other elements.
Learn more about octet rule at:
https://brainly.com/question/865531
#SPJ1
Identify the molecular geometry around each carbon atom in ch2chch3 using vsepr theory.
The molecular geometry around each carbon atom in [tex]CH_2CHCH_3[\tex]
using vsepr theory is tetrahedral and trigonal planar.
What is molecular geometry?
The three-dimensional shape that a molecule takes up in space is known as molecular geometry. It depends on the surrounding atoms and electron pairs as well as the core atom.
By assessing the amount of electron pairs surrounding an atom, the Valence Shell Electron Pair Repulsion (VSEPR) theory predicts molecular shapes and bond angles. Electron couples will reject one another because they are negatively charged. According to the idea, electron pairs will position themselves in three dimensions to minimise repulsion.
VSEPR Guidelines
Determine the main atom.
tally the valence electrons in it.
For every atom with a bond, add one electron.
For charge, add or subtract electrons (see Top Tip).
To determine the total, divide them by 2.
the quantity of electron pairs.
Make a shape prediction using this number.
Molecular geometry around propane is tetrahedral and trigonal planar.
Therefore, molecular geometry around [tex]CH_2CHCH_3[\tex] is tetrahedral and trigonal planar.
To learn more about molecular geometry from the given link:
https://brainly.com/question/29650255
#SPJ4
If 3.57 g of barium sulfate is formed, how many grams of sodium sulfate reacted
Answer:2.18 g.
Explanation:To find the mass of sodium sulfate reacted, we use the balanced chemical equation to know that 1 mole of sodium sulfate reacts with 1 mole of barium sulfate. From the given mass of barium sulfate formed, we calculate the number of moles of barium sulfate. Since the stoichiometry of the reaction is 1:1, the number of moles of sodium sulfate reacted is the same as the number of moles of barium sulfate formed. We then use the molar mass of sodium sulfate to calculate the mass of sodium sulfate reacted. The final answer is 2.18 g.
A mixture contains 1. 00kg of aluminium and 3. 00 kg of iron oxide. The equation for the reaction is 2Al+Fe2O3 =2Fe +Al2o3 Show that aluminium is a limiting reactant Relative atomic masses:O=16 Al=27 Fe=56
The maximum amount of Al₂O₃ that can be produced in this reaction is 1.00 kg, which confirms that aluminium is the limiting reactant.
To determine if aluminium is the limiting reactant in this reaction, we need to first calculate the theoretical yield of the reaction using both reactants.
From the balanced equation, we can see that for every 2 moles of aluminium, we need 1 mole of iron oxide.
1.00 kg of aluminium has a mass of 1000 g / 27 g/mol = 37.04 moles.
3.00 kg of iron oxide has a mass of 3000 g / (2 x 56 g/mol + 3 x 16 g/mol) = 13.39 moles.
Since we need half as many moles of iron oxide as aluminium for the reaction, the aluminium is the limiting reactant.
To calculate the theoretical yield of the reaction, we need to use the amount of aluminium as the limiting factor.
Since the balanced equation shows that 2 moles of aluminium react to produce 1 mole of Al₂O₃, we can calculate the theoretical yield of Al₂O₃ as:
37.04 moles Al x (1 mol Al₂O₃ / 2 mol Al) x (2 x 27 g/mol Al₂O₃) = 999.5 g or 1.00 kg (rounded to two significant figures).
Learn more about limiting reactants at https://brainly.com/question/26905271
#SPJ11
What is the mass of 6. 02 x 10^22 molecules of fluorine gas at stop
Answer:
3.7996 g
Explanation:
From the number of molecules we can find the number of moles of Fluorine gas (F2) and multiply by Fluorine Gas' molecular weight. Fluorine gas is F2,
F = 18.998g/mol.
F2 (g) = 18.998*2 =37.996g F2(g)/mol
1 mol = 6.02 x 10^23 molecules
[tex]\frac{6.02*10^{22} molecules}{6.02*10^{23}molecules / mole }\\\\ = 0.1 mole[/tex]
0.1 mol x 37.996g F2 (g) / mol
3.7996 g F2
9. the volume of a gas filled balloon is 30.0 l at 313 k and 1.5 atm. what would the volume be if the balloon was changed to stp?
The volume of the gas-filled balloon at STP would be 36.7 L.
To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas:
(P1V1)/T1 = (P2V2)/T2
where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.
At STP (standard temperature and pressure), the temperature is 273 K and the pressure is 1 atm. So we have:
(P1V1)/T1 = (P2V2)/T2
(1.5 atm x 30.0 L)/313 K = (1 atm x V2)/273 K
Solving for V2:
V2 = (1.5 atm x 30.0 L x 273 K)/(1 atm x 313 K)
V2 = 36.7 L
Therefore, the volume of the gas-filled balloon at STP would be 36.7 L.
To know more about combined gas law refer to-
https://brainly.com/question/27009857
#SPJ11
A student places a metal sphere with a temperature of 98 degress Celsius into a container of water with a temperature of 50 degress Celsius. Which of these is most likely the temperature of the water after the sphere and the water have reached thermal equilibium?
40 degree Celsius
50 degrees Celsius
70 degrees Celsius
100 degrees Celsius
The most likely temperature of the water after the sphere and the water has reached thermal equilibrium is approximately 70 degrees Celsius. So option C is correct.
This is because heat energy will flow from the metal sphere to the water until they both reach the same temperature. The initial temperature difference between the metal sphere and the water will cause heat to flow from the sphere to the water. As the heat flows, the metal sphere will cool down and the water will heat up. Eventually, they will both reach the same temperature, which will be somewhere between the initial temperatures of the sphere and the water. Therefore option: c is Correct.
To know more about Initial temperature, here
brainly.com/question/31702242
#SPJ4
you need to make an aqueous solution of 0.172 m iron(ii) nitrate for an experiment in lab, using a 250 ml volumetric flask. how much solid iron(ii) nitrate should you add?
We need to add 7.7 g of solid iron(II) nitrate to make a 0.172 M solution in 250 mL volumetric flask.
First, we can use molarity and volume of solution to find the number of moles of iron(II) nitrate needed:
moles of [tex]Fe(NO_3)_2[/tex]= Molarity × Volume in liters
moles of [tex]Fe(NO_3)_2[/tex] = 0.172 mol/L × 0.250 L = 0.043 mol
Next, we can use the molar mass of iron(II) nitrate to find the mass of the solid that needs to be added:
mass of [tex]Fe(NO_3)_2[/tex] = moles of [tex]Fe(NO_3)_2[/tex] × molar mass of [tex]Fe(NO_3)_2[/tex]
mass of [tex]Fe(NO_3)_2[/tex]= 0.043 mol × (55.85 g/mol + 2 × 14.01 g/mol + 6 × 16.00 g/mol)
mass of [tex]Fe(NO_3)_2[/tex]= 0.043 mol × 179.86 g/mol = 7.7 g
To know more about volumetric flask, here
brainly.com/question/19517011
#SPJ1
If the original volume of a gas was 300 L at 0. 250 atm and 400. 0 K, what is the volume of the gas at 2. 00 atm and 200. 0 K?
The volume of the gas at 2.00 atm and 200.0 K is 18.75 L.
We can use the combined to solve this problem:
(P1 * V1) / (T1) = (P2 * V2) / (T2)
where P is pressure, V is volume, and T is temperature.
Plugging in the given values:
(0.250 atm * 300 L) / (400.0 K) = (2.00 atm * V2) / (200.0 K)
Simplifying:
V2 = (0.250 atm * 300 L * 200.0 K) / (2.00 atm * 400.0 K)
V2 = 18.75 L
Therefore, the volume of the gas at 2.00 atm and 200.0 K is 18.75 L.
Gas laws refer to a set of principles that describe the behavior of gases under different conditions, including pressure, temperature, and volume.
There are several gas laws, including Boyle's law, Charles's law, Gay-Lussac's law, and the ideal gas law.
To know more about combined gas law refer to-
https://brainly.com/question/30458409
#SPJ11
What is the mass of a sample of NH3 containing 3. 80 × 10^24 molecules of NH3?
Answer:
107g
Explanation:
First convert the number of molecules to moles using avogadro's number.
There are 6.02 x 10^23 molecules in 1 mol.
3.8 x 10^24 molecules NH3 ÷ 6.02 x 10^23 molecules / mol
= 6.31 mol NH3
Now that we have moles of NH3 we can multiply it by NH3's molecular mass.
NH3 molecular mass = Mass of N + Mass of H x 3
14.007g/mol + 1.008g/mol * 3
= 17.031 g NH3/ mol
6.31 mol NH3 * 17.031 g NH3 / mol
= 107g NH3
can someone check these answers for me and give the right answer? (explanation would be super helpful but not required) studying for a chem test
Based on the properties of elements, the correct options for the reactivity and composition of elements and compounds are:
B)A) C)C)B)B)D)D) What are reactive elements?Reactive elements are elements that readily react with other elements by gaining or losing electrons.
Reactive elements may be metals such as alkali metals and alkaline earth metals or they may be non-metals such as halogens.
Considering the given questions about the properties of elements, the correct options are:
B) Noble gases are the least reactive group of elements.A) CO is a molecule made up of the elements carbon and oxygen.C) Mg, Ca, and Sr belong to the alkaline earth metal family.C) elements in the periodic table are arranged according to their atomic number.B) the atomic number tells us the number of protons in an atom.B) an electron carries a negative charge and is very small compared to the proton.D) the identity of an element is determined by the number of protons in its atom.D) the outermost electron orbits of noble gases have the maximum number of electrons.False. In a neutral atom, the number of electrons always equals the number of protons.False. In a physical change, no new substance is produced.True. Burning is an example of a chemical change.False. Non-metals are not lustrous, ductile, or malleable.True. Compounds are made up of two or more elements.True. Compounds cannot be broken down into simpler substances by physical means.True. To determine the number of neutrons, subtract the atomic number from the mass number.False. In Bohr's atomic model, the first electron orbit holds a maximum of 2 electrons.True. In the alkali metal family, the elements lower in the column are more reactive.True. Hydrogen, oxygen, and nitrogen are examples of non-metals.True. A gas that can re-ignite a glowing splint is oxygen.A change of state is a physical change.A change of color is evidence of a chemical change.Corrosion is a reaction between a metal and oxygen.Learn more about reactive elements at: https://brainly.com/question/30210122
#SPJ1
all chlorides, bromides, and iodides are soluble, except for the following ions.
Ag+ Hg2^2+ Pb^2+ Ca^2+ Sr^2+ Ba^2+ NH4+ alkali metals
There are no known exceptions
This statement refers to the solubility rules for ionic compounds in water. According to these rules, most chloride, bromide, and iodide compounds are soluble in water, meaning they can dissolve and form aqueous solutions.
However, there are some exceptions to this rule, and those exceptions involve the chloride, bromide, and iodide compounds of the ions Ag+, Hg2^2+, Pb^2+, Ca^2+, Sr^2+, Ba^2+, NH4+ and the alkali metals (Li+, Na+, K+, Rb+, Cs+). These compounds are generally insoluble in water, meaning they cannot dissolve and form aqueous solutions.
It is important to note that while these are general solubility rules, there may be some exceptions to them depending on the specific conditions of a given chemical system.
Visit here to learn more about ionic compounds brainly.com/question/3222171
#SPJ11
It is the basic element of drawing that helps us illustrate the realistic view of an object *
line
alphabet of lines
drawing
lay-out
The basic element of drawing that helps us illustrate the realistic view of an object is the "line."
Lines are essential as they define shapes, outlines, and edges of objects in drawings. The "alphabet of lines" refers to the different types of lines used in technical drawing, such as continuous, dashed, and dotted lines.
These lines help convey various details and aspects of the object being drawn.
In the "drawing" process, you use these lines to create a realistic representation of an object by capturing its dimensions, proportions, and perspective.
The "layout" is the arrangement of these lines and shapes on the drawing surface, ensuring a clear and organized presentation. To "generate" a drawing, you must effectively utilize these lines, the alphabet of lines, and the layout to create a visually accurate representation of the object you are depicting.
By incorporating these terms and concepts, you can create a detailed and realistic drawing that effectively communicates the appearance and characteristics of the object in question.
To know more about line refer here: https://brainly.com/question/31537328#
#SPJ11
which nutrients are most responsible for eutrophication?
a. carbon and oxygen
b. carbon and phosphorus
c. nitrogen and oxygen
d. nitrogen and phosphorus
Answer:
C. Nitrogen and Phosphorous.
Explanation:
A 100ml sample of 0.40m hydrofluoric acid is mixed with 100ml of 0.40m lithium hydroxide. will the ph of the final solution be less than 7, equal to 7, or greater than 7
The pH of the final solution will be equal to 7.
When 100 mL of 0.40 M hydrofluoric acid (a weak acid) is mixed with 100 mL of 0.40 M lithium hydroxide (a strong base), the reaction can be represented as:
HF + LiOH → LiF + H₂O
As both solutions have equal concentrations and volumes, they will completely neutralize each other. The product, LiF, is a soluble salt and will dissociate into Li+ and F- ions in water.
Since the number of moles of H+ and OH- ions is the same in the reaction, they will react to form water (H₂O), resulting in a neutral solution with a pH of 7. The formation of water from equal amounts of H⁺ and OH⁻ ions indicates that the solution is neither acidic nor basic, thus leading to a pH of 7.
To know more about weak acid click on below link:
https://brainly.com/question/22104949#
#SPJ11
Plan an investigation to explore the relationship between properties of substances and the electrical forces within those substances.
What can properties of substances tell us about the electrical forces within those substances?
In this activity, you will plan and conduct an investigation to compare a single property across several substances. You must select a measurable property, such as boiling point or surface tension. After your investigation, you will compare the results and use your data to make inferences about the strength of the electrical forces in each substance you tested
The first step in this investigation will be to select several substances to test. It is important to choose substances that have similar chemical composition but differ in physical properties.
Once the substances have been selected, the next step is to measure the single property across each of the substances. This can be done through a variety of methods, such as using a thermometer to measure boiling points or a microscope to measure surface tension.
After the data has been collected, it should be compared and analyzed to determine how the property is related to the strength of the electrical forces in the substance. By comparing the data and making inferences, it is possible to determine how properties of substances can indicate the strength of the electrical forces within those substances.
Know more about Thermometer here
https://brainly.com/question/24189042#
#SPJ11