Use information from the reaction to design an experiment that could be used to remove the tarnish (Ag2S) from a silver fork

Answer:c

Explanation:

Answer:

1 gram of H2 will be produced from 12 grams of Mg.

Explanation:

According to Stoichiometry, 0.5 moles of Mg are present. 1 mole of Mg produces 1 mole of H2, so 0.5 moles of Mg will produce 0.5 moles of H2. Multiplying molar mass of H2 i.e. 2 gram/mole with 0.5 moles, we can find the mass of H2 in grams which is 1 gram.

Answer:

I don't know I am sorry

Answer:

need more info on block labeled ''A''

Explanation:

Answer:

From becoming magma. It comes to the surface because of the tectonic plates shifting, it's able to escape from the cracks. it also may cause the plates to melt and allow the magma to rise.

Explanation:

deep underground, rocks are put under tons of pressure and extremely hot temperatures, causing them to melt into magma. sometimes the magma cools and becomes igneous rock. Magma makes it to the surface by either escaping through cracks in tectonic plates or by melting the plates and rising.

The order of [NO] is 2.

The rate law for a chemical reaction is an equation that describes how the rate of the reaction changes with respect to the concentrations of the reactants. In this case, the rate law for the reaction 2NO(g) + O2(g) → 2NO2(g) is Rate = k[O2][NO]^2.

The order of a reactant in a rate law is determined by the exponent to which its concentration is raised. In this case, the concentration of NO is raised to the power of 2, so the order of [NO] is 2. This means that the rate of the reaction is directly proportional to the square of the concentration of NO. Therefore, as the concentration of NO increases, the rate of the reaction will increase at a faster rate.

Learn more about the chemical reaction here:

https://brainly.com/question/25769000

#SPJ4

yeah same I'm bóred too -,-

Answer:

sure hi ...............................

There are 20 grams of Sodium hydroxide in a molar solution that has a volume of 500 cm3.

Caustic soda and lye are two other names for sodium hydroxide. It is a typical component of soaps and cleansers. Sodium hydroxide seems to be a white, unscented solid at room temperature. Sodium hydroxide is a colorless, odorless liquid. Strong acids and water can cause explosive reactions with it.

Molarity is calculated by

moles (solute) / volume of solution in L

No. of moles = mass / molar mass

We have to find mass of sodium hydroxide (NaOH)

As we know, in 1 L (1000 cm³) of molar solution there is 40 gram of NaOH present.

From using this statement, 500 cm³ of a molar solution, means half liter of a molar solution contain -

= 40 / 2

= 20 gram of NaOH.

To know more about sodium hydroxide visit :

https://brainly.com/question/24010534

#SPJ1

Answer:

We can answer this question if the chemical reaction provided to this question is provided to us.

Diatomic elements are elements that exist as molecules composed of two atoms of the same element.

Diatomic molecules are molecules composed of two atoms, such as Oxygen (O2), Hydrogen (H2), Nitrogen (N2), and Fluorine (F2). Diatomic molecules are the most common type of molecules in nature and are found in all three states of matter (solid, liquid, and gas). Diatomic molecules contain only two atoms and do not contain any other elements or molecules.

This is in contrast to other elemental substances, which exist as individual atoms or molecules composed of different elements. Diatomic elements have unique chemical and physical properties due to the strong bond between the two atoms.

To learn more about Diatomic
https://brainly.com/question/15067534
#SPJ4

To solve this we must be knowing each and every concept related to atom. Therefore, Bohr's model was abandoned since it lacked explanatory, descriptive, and predictive ability.

Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.

In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. Bohr's model was abandoned in favor of the quantum mechanical model since it lacked explanatory, descriptive, and predictive ability.

Therefore, Bohr's model was abandoned since it lacked explanatory, descriptive, and predictive ability.

To know more about atom, here:

https://brainly.com/question/13518322

#SPJ1

Following is the list of primary secondary and tertiary alcohols.

Alcohols are chemical compounds made composed of an alkyl or aryl group and a hydroxyl group (ROH). A fundamental alcohol is a hydroxyl carbon with just one R group. If it contains two R groups, it is a secondary alcohol, and if it has three R groups, it is a tertiary alcohol.

Look at the carbon bonded to OH to identify whether an alcohol is primary, secondary, or tertiary. The alcohol is primary, secondary, or tertiary depending on how many other carbons are connected to that carbon. It is methanol if there are three hydrogens and no carbons, which is a rare combination.

For the given formulas, following are different types of alcohols -

a) Primary Alcohols

b) Tertiary Alcohol

c) Secondary Alcohol

d) Primary Alcohol

e) Primary Alcohol

f) secondary Alcohol

To learn more about primary secondary and tertiary alcohols​ from given link

https://brainly.com/question/28108673

#SPJ1

Answer:

1..) The property by the virtue of which the metals can be beaten into sheets.

Malleability.

2.

I.Reaction of iron with copper sulphate solution

ii.

Iron metal displaces copper from its compound copper sulphate and forms iron sulphate along with copper metal. This reaction is a displacement reaction.

Reaction:

Fe(Iron)+CuSO4(Copper Sulphate)-------FeSO4(Ferrous Sulphate)+Cu(Copper)

A quality of matter that is unrelated to a change in its chemical makeup is called a physical property. Density, color, hardness, melting and boiling points, and electrical conductivity.

A quality of matter that is unrelated to a change in its chemical makeup is called a physical property. Density, color, hardness, melting and boiling points and electrical conductivity are a few common examples of physical qualities.

A substance with a given mass and a certain volume in space is referred to as matter. Examples of matters are pens, pencils, toothbrushes, water, and milk, as well as vehicles like cars, buses, and bicycles. Therefore, the matter is divided into two categories: living and non-living.

to know more about  physical properties here:

brainly.com/question/18327661

#SPJ1

Physical properties are characteristics of matter that are independent of changes in its chemical composition. Electrical conductivity, hardness, melt and boiling points, and density.

Physical properties are characteristics of matter that are independent of changes in its chemical composition. Physical characteristics include things like density, color, durability, melting , boiling temperatures, and electrical conductivity, to name a few.

Matter is defined as a material having a certain mass and spatial volume. Pencils, pencils, toothbrushes, water, milk, as well as automobiles, buses, and bicycles, are examples of matters. 

To know more about physical properties here:

brainly.com/question/18327661

#SPJ1

Answer:

-mass number

-Iodine was placed after tellurium because it has a lower atomic mass

Answer: Moving?

Explanation:

According to the concept of Avogadro's number and STP conditions volume in liters of the sample is 15,388.7.

Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.

According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.

Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number

Number of moles is obtained as, number of atoms/Avogadro's number=4.088×10²⁴/6.023×10²³=6.78 moles on substitution in formula of PV=nRT=V=6.78×8.314×273/1=15,388.7 liters.

Thus, the volume is 15,388.7 liters of the sample.

Learn more about Avogadro's number,here:

https://brainly.com/question/11907018

#SPJ1

The zeroth law of thermodynamics describes the state where we can say what about the movement of heat between two substances

The Zeroth Law of thermodynamics is a basic law that describes the state in which two bodies are in thermal equilibrium. It states that if two bodies are in thermal equilibrium with a third body, then they are in thermal equilibrium with each other. In other words, it allows us to determine if two bodies are at the same temperature and if there is no heat flow between them. So, it describes the state where there is no movement of heat between two substances.

Learn more about The zeroth law of thermodynamics here: https://brainly.com/question/3985078

#SPJ4

Pyruvate is converted to lactate in anaerobic conditions by anaerobic glycolysis. During anaerobic respiration, two ATP molecules are produced.

What is the primary step in glycolysis?

The method by which glucose is metabolized to produce energy is known as glycolysis. It generates water, ATP, NADH, and two pyruvate molecules. It doesn't need oxygen to happen because it happens in a cell's cytoplasm. Both in aerobic and anaerobic organisms, it happens.

How is glycolysis referred to?

Gustav Embden, Otto Meyerhof, & Jakub Karol Parnas identified the Embden-Meyerhof-Parnas (EMP) pathway, which is the most typical kind of glycolysis. The Entner-Doudoroff pathway and several heterofermentative & homofermentative pathways are examples of additional pathways that are included in the term "glycolysis."

To know more about glycolysis visit:

https://brainly.com/question/14076989

#SPJ4

In anaerobic circumstances, anaerobic glycolysis converts pyruvate to lactate. Two ATP molecules are created during anaerobic respiration.

The process of converting glucose into energy is known as glycolysis. Water, ATP, NADH, and two pyruvate molecules are produced. It does not require oxygen to occur since it occurs in the cytoplasm of a cell. It occurs in both aerobic and anaerobic species.

The Embden-Meyerhof-Parnas (EMP) route, which is the most common kind of glycolysis, was discovered by Gustav Embden, Otto Meyerhof, and Jakub Karol Parnas. Additional processes included in the word "glycolysis" include the Entner-Doudoroff pathway and numerous heterofermentative and homofermentative pathways.

Here,

Anaerobic glycolysis converts pyruvate to lactate under anaerobic conditions. During anaerobic respiration, two ATP molecules are produced.

To learn more about glycolysis, go to:

brainly.com/question/14076989

#SPJ4

12mol ratios can be obtained .

The net ionic equation is a chemical equation that only depicts the elements, compounds, and ions that are directly involved in the chemical process.
As previously stated, we employ net ionic equations to highlight the molecules that change throughout the reaction. It makes it simple to identify the active molecules in a reaction since they are the only ones in the equation.

Fill in the blanks with the balanced molecular equation.
For each substance, write the state (s, l, g, aq).
Break down strong electrolytes into ions (the complete ionic equation).
Remove the spectator ions from both sides of the full ionic equation.

To learn more about mol ratios  to refer:
https://brainly.com/question/29478671
#SPJ1

Answer:

T° = 453.6 K

Explanation:

Let's apply the Ideal Gases Law to solve the question:

Pressure . Volume = number of moles . R . T°

We replace data:

5.5 atm . 35.3L = 5.2 mol . 0.082 L.atm/mol.K .T°

T° = (5.5 atm . 35.3L) / (5.2 mol . 0.082 L.atm/mol.K)

T° = 453.6 K

The Ideal Gases Law contains the Absolute value of T° (Kelvin degrees)

So the final answer is: 453.6 K

You can also determine this, because the unit of R (Ideal Gases constant)

Answer:

STP in chemistry is the abbreviation for Standard Temperature and Pressure. STP most commonly is used when performing calculations on gases, such as gas density. The standard temperature is 273 K (0° Celsius or 32° Fahrenheit) and the standard pressure is 1 atm pressure.

The mass in grams of 6.02×[tex]10^{23}[/tex]  N2 molecules is 9.24×[tex]10^{23}[/tex] gram.

This is because each molecule of N2 is composed of two atoms of nitrogen, which each have a mass of 14.0067 grams.

Thus, the total mass of 6.022×[tex]10^{23}[/tex] N2 molecules is calculated by multiplying the number of molecules by the mass of each molecule, which is 28.0134 grams.

14.0067×2=28.013grams

This gives us a total mass of

6.02×1023×28.0134=9.24×[tex]10^{23}[/tex] grams

Molar mass:

Molar mass is the mass of one mole of a substance. It is expressed in grams per mole (g/mol). It is calculated by adding up the atomic weights of all the atoms in a molecule or formula unit of a compound. It is a useful measure when calculating the mass of a substance, or when calculating stoichiometric ratios in a chemical reaction.

Therefore the mass of 6.022×[tex]10^{23}[/tex] N2 molecule is 9.24×[tex]10^{23}[/tex]grams.

Learn more about molar mass:

https://brainly.com/question/25274322

#SPJ4

Answer:

High and low pressure regions form when there is a large temperature difference between the surface of the sea (or a large lake) and the land next to it. Local winds are created as a result of this. Warmer air from the ocean rises and then sinks on land, causing the temperature to rise over the land.

Being a highly chemically reactive metal having seven valence electrons and even a high attraction for electrons, bromine reacts quickly as well as violently with alkali metals, therefore is rarely found in nature pure.

Despite being a potent oxidizer, it is difficult to break down under typical circumstances. Fluorine was the strongest active halogen, followed by chlorine, bromine, as well as iodine.

Since bromine has a higher atomic radius over chlorine, it is much less reactive. Compared to chlorine, bromine does not hold electrons as tightly. This is supported by the fact that chlorine contains fewer electron shells, which causes the electrons to connect nearer to the nucleus.

Due to its lower reactivity, the bromine radical is so much more selective for such 2° radical. Cl• is much less picky and less selective since it is less stable as well as more reactive.

To know more about  chemically reactive

https://brainly.com/question/9621716

#SPJ4

Based on the information, UV light is more likely to damage the material.

Due to the fact that the infrared light bounces off the quartz, which increases its energy, the quartz may become warm.

The colors of paper and fabric can deteriorate due to ultraviolet light from the sun. In the presence of ultraviolet light waves, the chemicals in colored dyes can degrade. Sunburns may also result from ultraviolet radiation.

Paper and other organic materials will deteriorate, bleach, and deteriorate due to ultraviolet radiation. All of these modifications may reduce readability, affect how well artwork is regarded for its aesthetic qualities, and restrict access to the information it contains.

To know more about UV light visit:

https://brainly.com/question/13358417

#SPJ4

Answer:  16700 mmHg , 22,0 atm

Explanation:   1 torr  = 1 mmHg, so p = 16700 torr = 16700 mmHg

1 atm = 101325 Pa = 760 torr

16700 torr / 760 = 21,97 atm

This is because intermolecular forces have a greater effect in a solution when bonding is present than in a vacuum when bonding is not present.

The attracting and repellent forces that develop between the molecules of a substance are known as intermolecular forces or IMF for short. Individual molecules of a substance interact with one another through the mediation of these forces.

Most of the physical and chemical features of matter are caused by intermolecular forces.

An intermolecular force is an attractive force that develops between the protons or positive parts of one molecule and the electrons or negative parts of another molecule. This force affects a substance's many physical and chemical properties. The strength of a material's intermolecular forces directly relates to the boiling point of that substance; the stronger the intermolecular forces, the higher the boiling point.

Learn more about Intermolecular forces  here:

https://brainly.com/question/9007693

#SPJ4

Here's link[tex]^{}[/tex] to the answer:

bit.[tex]^{}[/tex]ly/3gVQKw3

Answer:

B

Explanation:

Answer:

The source of the activation energy needed to push reactions forward is typically heat energy from the surroundings.

Explanation:

The activation energy of a particular reaction determines the rate at which it will proceed. The higher the activation energy, the slower the chemical reaction will be