The distributive property allows us to distribute 4 to each term inside the parentheses, add the terms first, then distribute the result to x. It also allows us to distribute 6 to each term inside the parentheses, such as 6(x+y+z) = 6x + 6y + 6z.
What is distributive property?The distributive property is a mathematical property that applies to operations, such as addition and multiplication, that involve two or more terms. The distributive property states that the result of multiplying a term by a sum or difference of terms is the same as multiplying each term inside the parentheses by the term outside the parentheses and then adding or subtracting the results.
1. Using the distributive property, we can distribute the 4 to each term inside the parentheses:
4(x+2) = 4x + 42 = 4x + 8
Therefore, the equivalent expression is 4x + 8.
2. Using the distributive property, we can add the terms inside the parentheses first, then distribute the result to x:
(6+8)•x = 14•x
Therefore, the equivalent expression is 14x.
3. Using the distributive property, we can distribute the 4 to each term inside the parentheses:
4(2x+3) = 42x + 43 = 8x + 12
Therefore, the equivalent expression is 8x + 12.
4. Using the distributive property, we can distribute the 6 to each term inside the parentheses:
6(x+y+z) = 6x + 6y + 6z
Therefore, the equivalent expression is 6x + 6y + 6z.
To know more about distributive property visit:
brainly.com/question/16164348
#SPJ1
If an acute angle increases, then its supplement
Select one:
a. stays the same
b. increases
c. decreases
d. not enough information
If an acute angle increases, then its supplement decreases.
To give you a short quick answer, the supplement is going to have to decrease or get smaller.
Example
Suppose the acute angle is 10 (anything under 90 will do).
Then the supplement is going to be 180 - 10 = 170
Now suppose the acute angle increase to 50 degrees.
That means the supplement will go from 180 - 50 = 130
Conclusion
As the acute angle gets bigger, the supplement gets smaller. This is an important idea to get clear. Bigger and Smaller or More or Less can be ugly little words, so anytime you come across them, pay attention. It will make your life in science so much easier
learn more about supplement angle,
https://brainly.com/question/13045673
#SPJ1
The line plots represent data collected on the travel times to school from two groups of 15 students.Compare the data and use the correct measure of center to determine which bus typically has the faster travel time. Round your answer to the nearest whole number, if necessary, and explain your answer. Bus 47, with a median of 16 Bus 14, with a median of 14 Bus 47, with a mean of 16 Bus 14, with a mean of 14
We can conclude that Bus 14 typically has the faster travel time since its median is lower than that of Bus 47.
When data are sorted in ascending or descending order, the median, a measure of center, indicates the dataset's middle value. Extreme numbers or data outliers have no impact on it.
From the given information, we know that the median travel time for Bus 47 is 16 and the median travel time for Bus 14 is 14.
What is median?
When values are arranged in order of magnitude, the median, a measure of central tendency, indicates the midpoint of the dataset. You must organise the values in ascending order from smallest to largest before determining the middle value to determine the median.
The mean, on the other hand, is affected by extreme values or outliers in the data, which can skew the value. Therefore, we cannot solely rely on the mean to compare the travel times of the two buses. However, for completeness, we also have the mean travel times of Bus 47 and Bus 14, which are both given as 16 and 14, respectively.
Therefore, we can conclude that Bus 14 typically has the faster travel time since its median is lower than that of Bus 47.
To learn more about median from the given link:
brainly.com/question/28060453
#SPJ1
The points
�
(
−
7
,
8
)
,
�
(
−
1
,
9
)
M(−7,8),N(−1,9), and
�
(
0
,
3
)
O(0,3) form a triangle. Find the desired slopes and lengths, then fill in the words that characterize the triangle.
Based on the lengths of the sides, we can see that the triangle is scalene. Based on the slopes of the sides, we can see that the triangle is acute since all the slopes are negative or less than 1.
What is triangle?A triangle is a three-sided polygon with three vertices. The triangle's internal angle, which is 180 degrees, is constructed.
To find the desired slopes and lengths of the triangle formed by the points M(-7, 8), N(-1, 9), and O(0, 3), we can use the distance formula and the slope formula.
Distance formula:
The distance between two points (x₁, y₁) and (x₂, y₂) is given by:
d = √((x₂ - x₁)² + (y₂ - y₁)²)
Using this formula, we can find the lengths of the sides of the triangle:
Length of MO:
d(MO) = √((0 - (-7))² + (3 - 8)²) = √(7² + 5²) = √(74)
Length of NO:
d(NO) = √((-1 - (-7))² + (9 - 8)²) = √(6² + 1²) = √(37)
Length of MN:
d(MN) = √((-1 - (-7))² + (9 - 8)²) = √(6² + 1²) = √(37)
Slope formula:
The slope of a line passing through two points (x₁, y₁) and (x₂, y₂) is given by:
m = (y₂ - y₁) / (x₂ - x₁)
Using this formula, we can find the slopes of the sides of the triangle:
Slope of MO:
m(MO) = (3 - 8) / (0 - (-7)) = -5/7
Slope of NO:
m(NO) = (9 - 8) / (-1 - (-7)) = 1/6
Slope of MN:
m(MN) = (9 - 8) / (-1 - (-7)) = 1/6
Characterization of the triangle:
Based on the lengths of the sides, we can see that the triangle is scalene (no two sides have the same length). Based on the slopes of the sides, we can see that the triangle is acute (all angles are less than 90 degrees) since all the slopes are negative or less than 1. Additionally, we can see that the side MO is the longest side of the triangle, and since the slope of MO is negative, we can conclude that the angle opposite side MO is the largest angle in the triangle.
Learn more about triangle on:
https://brainly.com/question/9916775
#SPJ1
What is the minimum price for a dozen eggs if the cost of four dozen and half a gallons of milk costing $2.97 exceeded the $10 chase has in his pocket
Answer:
The cost of 4 dozen eggs is 4 * $1.25 = $5.
The cost of half a gallon of milk is $2.97.
The total cost of the eggs and milk is $5 + $2.97 = $7.97.
Since Chase has only $10, the minimum price for a dozen eggs is $10 - $7.97 = $2.03.
So the answer is 2.03
Step-by-step explanation:
write an equation in point-slope form of the line that passes through (9, 4) and is parallel to the line y = x - 6.
WILL GIVE BRAINLIEST
Answer:
y = x - 5
Step-by-step explanation:
y = x -6
y = MX +C
.: m = 1 ( where m is the gradient of the line)
Let gradient = gradient 2 ( because the lines are parallel to each other)
m1= m2
1= y- y1 / x - x1
( 9,4) = ( x1 , y1 )
.: 1= y - 4 / x - 9
Cross multiply
1( x -9) = y - 4
x - 9 = y - 4
y = x - 9 + 4
y = x - 5
.: The equation of the line is y = x -5
The answer can also be written as y - 4 = 1( x -9)
In this problem you will use a ruler to estimate the length of JK. Afterwards you will be able to see the lengths of the other two sides and you will use the Pythagorean Theorem to check your answer.
[tex]\begin{array}{llll} \textit{using the pythagorean theorem} \\\\ c^2=a^2+o^2\implies c=\sqrt{a^2 + o^2} \end{array} \qquad \begin{cases} c=\stackrel{hypotenuse}{JK}\\ a=\stackrel{adjacent}{5}\\ o=\stackrel{opposite}{49} \end{cases} \\\\\\ JK=\sqrt{ 5^2 + 4.9^2}\implies JK=\sqrt{ 25 + 24.01 } \implies JK=\sqrt{ 49.01 }\implies JK\approx 7[/tex]
4.) a person who has a slow reation time will fall in the top 10% of responses. theoretically, what value separates the top 10% of responses from the bottom 90%?
If a person has a slow reaction time that puts them in the top 10% of responses, it means that their reaction time is slower than 90% of the population.
The value that separates the top 10% of responses from the bottom 90% is determined by the distribution of reaction times in the population.
Assuming a normal distribution of reaction times, the value that separates the top 10% of responses from the bottom 90% is the 90th percentile. This means that 90% of the population has a reaction time below this value, while the top 10% have a reaction time equal to or above it.
The specific value that separates the top 10% from the bottom 90% can vary depending on the population being studied and the task being performed. However, in general, a value around 1.5 standard deviations above the mean reaction time would be a reasonable estimate for the 90th percentile.
Learn more about standard deviations here:
https://brainly.com/question/13905583
#SPJ4
The Fox River Fishing Club held its annual bass fishing contest last weekend. The contest organizer recorded the weight of each fish.
Bass weights (lb.)
4
6
8
10
12
14
What was the interquartile range of the weights?
448m^2−49.81m=?
I need to know
Answer:
The answer to the expression 448m^2−49.81m is 448m^2 - 49.81m. It cannot be simplified further without knowing the value of m.
In the coordinate plane, what is the length of the line segment that connects points at (0, −1) and (−7, −2)? Enter your answer in the box. Round to the nearest hundredth. units
Answer:
[tex] \sqrt{ {(0 - ( - 7))}^{2} + {( - 1 - ( - 2))}^{2} } [/tex]
[tex] \sqrt{ {7}^{2} + {1}^{2} } [/tex]
[tex] \sqrt{49 + 1} = \sqrt{50} = 5 \sqrt{2} [/tex]
5√2 units is about 7.07 units.
answer with solution please thankyou
Answer:
james sets off from home on a bike.The graph journey.
a)what is james' average speed on his outward journey
Algebra 2 Honors Unit 7 RETAKE ZOOM 2. Find the leading coefficient (a) of the cubic function that has roots at -9, -5, and 3 with a y-intercept of -27. Round answer to hundredth's place (2 decimal places)
Answer:
To find the cubic function with the given roots, we can use the factored form of a cubic function:
f(x) = a(x - r1)(x - r2)(x - r3)
where r1, r2, and r3 are the roots of the function.
Substituting the given roots, we get:
f(x) = a(x + 9)(x + 5)(x - 3)
To find the leading coefficient a, we need to use the y-intercept of the function, which is given as -27.
When x = 0, the function becomes:
f(0) = a(9)(5)(-3) = -27
Simplifying and solving for a, we get:
a = -27 / (9)(5)(-3) = 0.6
Rounding to two decimal places, the leading coefficient of the cubic function is a = 0.60.
Instructions: Select all the statements that are true.
Answer:
1, 2, 3, 5
Step-by-step explanation:
someone help please and asap
Answer:
x=5.8
Step-by-step explanation:
a^2+b^2=c^2
3^2+5^2=x^2
9+25 = 34
[tex]\sqrt{34)[/tex] = 5.8
Answer:
[tex]17\sqrt{2}[/tex] or approximately 5.83
Step-by-step explanation:
The triangle is a right triangle so we use Pythagorean theorem to find the missing side.
[tex]a^{2} + b^{2} =c^{2}[/tex]
x is the hypotenuse so that has to be the value of c but the other two sides are interchangeable.
[tex]3^{2} + 5^{2} = x^{2}\\\\9+25=x^{2} \\\\34=x^{2} \\[/tex]
Square both sides to isolate the x.
[tex]\sqrt{34} =x[/tex]
Simplify
[tex]17\sqrt{2} =x\\[/tex]
Binh solved this system of equations by graphing.
Line 1: y = negative one-half x minus three-halves. Line 2: y = x minus 3.
Binh’s Graph
On a coordinate plane, a line with equation y = x minus 3 goes through (negative 3, 0) and (0, 3). A line with equation y = negative one-half x minus three-halves goes through (negative 3, 0) and (1, negative 2).
Which statements identify the errors Binh made? Check all that apply.
Binh incorrectly graphed the equation y = x minus 3.
Binh should have graphed the y-intercept of y = x minus 3 at (0, negative 3).
Binh should have graphed the y-intercept of y = negative one-half x minus three-halves at (0, negative one-half).
Binh incorrectly graphed the equation y = negative one-half x minus three-halves.
Binh should have found the point of intersection to be (1, negative 2).
The solution to the system of Equations is x = 1 and y = -2.
Binh was solving a system of equations using the graphing method. This method involves graphing the given equations and finding the point where the graphs intersect. In this case, Binh incorrectly graphed the equation y = x - 3.
To solve the system correctly, Binh should follow these steps:
1. Rewrite the equation, if needed, in the slope-intercept form, y = mx + b, where m is the slope and b is the y-intercept. The given equation, y = x - 3, is already in this form.
2. Determine the slope (m) and the y-intercept (b) of the equation. For the equation y = x - 3, the slope (m) is 1 and the y-intercept (b) is -3.
3. Graph the equation by first plotting the y-intercept on the y-axis and then using the slope to find additional points on the graph.
4. Repeat steps 1-3 for the second equation in the system.
5. Observe where the graphs intersect. This point represents the solution to the system of equations.
In this case, Binh should have found the point of intersection to be (1, -2). This means that the solution to the system of equations is x = 1 and y = -2. By accurately graphing the equations and finding the correct point of intersection, Binh can ensure that they have solved the system of equations correctly.
To Learn More About Equations
https://brainly.com/question/2972832
SPJ11
Question 7(Multiple Choice Worth 2 points)
(One-Step Inequalities MC)
Write and solve the inequality that represents negative one fifth is greater than or equal to the product of negative two thirds and a number.
negative two thirds is less than or equal to negative one fifth y where y is less than or equal to two fifteenths
negative two thirds is less than or equal to negative one fifth y where y is greater than or equal to negative three tenths
negative one fifth is greater than or equal to negative two thirds y where y is greater than or equal to three tenths
negative one fifth is less than negative two thirds y where y is less than or equal to negative two fifteenths
The word phrase "negative one fifth is bigger than or equal to the product of negative two thirds" is represented by the inequality "1/5 ≥ (-2/3) x," and its solution is x ≥ 3/10.
How is inequity resolved?The inequality that symbolises the word phrase as supplied in the task content must be determined, as is evident from the assignment's content.
Negative one fifth is more than or equal to the product of negative two thirds and a number, which is how the disparity is expressed.
Therefore,
Let the number = y
- 1 / 5 ≥ - 2 / 3 × y
- 1 / 5 ≥ - 2 / 3 y
Now, multiply both sides of the inequality by - 3 / 2
Therefore,
- 1 / 5 (- 3 / 2) ≤ y
3 / 10 ≤ y
y ≥ 3 / 10
Therefore, y is greater than or equal to three tenths.
To know more about inequality, visit:
brainly.com/question/28779598
#SPJ1
39.4 is what percent of 64? Round to the nearest hundredth.
Answer: 61.56%
Step-by-step explanation:
To find what percent 39.4 is of 64, we can use the following formula:
(percent / 100) * 64 = 39.4
Solving for percent, we get:
percent = (39.4 / 64) * 100
percent = 0.615625 * 100
percent = 61.56 (rounded to the nearest hundredth)
Therefore, 39.4 is approximately 61.56% of 64 when rounded to the nearest hundredth.
I would be grateful if anyone could help me solve this question with the process. It is asking to find the value of angle POQ using properties of a circle..
Answer:
Step-by-step explanation:
two teams play a best of 7 match. each team is equally like to win each game. find the expected value and variance of the number of games played.
The expected value of the number of games played is 5.5 games, and the variance is 1.25.
To find the expected value of the number of games played, we need to consider all the possible ways the match can end. Since the match is a best of 7, one team needs to win at least 4 games. The possible outcomes are:
Team A wins in 4 games: AAAA
Team A wins in 5 games: AABAA or ABAAA
Team A wins in 6 games: ABAABA, ABABAA, or ABBAAA
Team A wins in 7 games: ABABABA, ABABAB, ABBABAA, or ABBABAAA
Similarly, we can list the possible outcomes for Team B winning in 4, 5, 6, or 7 games. However, since both teams are equally likely to win each game, the probability of each outcome is the same. Therefore, the expected value of the number of games played is:
E(X) = (41/8) + (52/8) + (63/8) + (72/8) = 5.5 games
To find the variance, we need to first calculate the squared deviation from the expected value for each outcome. For example, for the outcome AABAA, the deviation is (5-5.5) = -0.5, and the squared deviation is (-0.5)^2 = 0.25. We can then multiply each squared deviation by the probability of that outcome and sum them up,
Var(X) = (1/8)(4-5.5)^2 + (2/8)(5-5.5)^2 + (3/8)(6-5.5)^2 + (2/8)(7-5.5)^2
= 1.25
Therefore, the expected value of the number of games played is 5.5 games, and the variance is 1.25.
Learn more about variance on
https://brainly.com/question/14116780
#SPJ4
Please help I’m confused. Image attached, thanks it’s number 3
Answer:
B
Step-by-step explanation:
The independent variable is t (time) because no matter what happens the weeks will still pass. The dependent variable is b (balance) because it depends on the amount of time passed. You can see that after every week the balance decreases by 50. So when the independent variable increases by 1, the dependent variable decreases by 50.
I need to know how to answer this it hard
B) 0.18
To convert 2/11 into decimal form, divide 2 by 11 using a calculator or long division.
The result is 0.18181818... (the pattern of 18s repeats indefinitely).
Therefore, 2/11 as a decimal is approximately 0.1818 (rounded to four decimal places).
Answer:
B. [tex]0.\overline{18}[/tex]
Step-by-step explanation:
2/11 in decimal form is a set of repeating 18's:
0.181818181818...
This can be represented using bar notation, where digits under the bar repeat infinitely:
[tex]0.\overline{18}[/tex]
__
Extra note:
A trick for fractions with 99 in the denominator is that, when the fraction is converted into a decimal, the numerator of the fraction is the repeating two digits.
In this problem, when we convert 2/11 to 99ths:
[tex]\dfrac{2}{11} \cdot \dfrac{9}{9} = \dfrac{18}{99}[/tex],
we can see that 18 is in the numerator, so that is the repeating part of the decimal [tex]0.\overline{18}[/tex].
a one-tailed test of significance could be used whenever select one: a. the researcher is interested in predicting a direction for the difference b. the researcher feels like it c. the null hypothesis is thought to be true d. the alpha level exceeds 0.10
A one-tailed test of significance could be used whenever the researcher is interested in predicting a direction for the difference.What is a one-tailed test?A one-tailed test is a statistical hypothesis test in which the critical region of a parameter's distribution is only one-sided, indicating that it is either higher or lower than the values obtained from sample data.
A one-tailed test is also known as a one-sided test or a directional hypothesis test.It is used when the research hypothesis states a direction for the population parameter (i.e., greater than or less than a specific value).
For example, if we want to test whether a new drug reduces blood pressure, we could conduct a one-tailed test with the null hypothesis stating that the drug has no effect on blood pressure, and the alternative hypothesis indicating that the drug lowers blood pressure. In this scenario, a one-tailed test will be suitable.
Learn more about hypothesis:
https://brainly.com/question/27809115
#SPJ11
The total power of a space shuttle during launch is the sum of the power from its solid rocket boosters and the power from its main engines. The power from the solid rocket boosters is 9,750,000,000 watts. What is the power from the main engines?
The power from the main engines, P = 0.
What is power?
Let P be the power from the main engines. Then, the total power of the space shuttle during launch is:
Total power = Power from solid rocket boosters + Power from main engines
Total power = 9,750,000,000 watts + P
We can isolate P by subtracting the power from the solid rocket boosters from both sides:
P = Total power - Power from solid rocket boosters
P = (9,750,000,000 watts + P) - 9,750,000,000 watts
P = P
Simplifying, we get:
P = 0
This means that the power from the main engines is zero. However, this result is not realistic since the space shuttle requires power from both the solid rocket boosters and the main engines to launch. Therefore, there may be an error in the given information or additional information is needed to accurately solve the problem.
To know more about space shuttle, visit:
https://brainly.com/question/6906642
#SPJ9
What are the coordinates of each point after quadrilateral ABCD is rotated 270° counterclockwise about the origin?
The new coordinates for point D after the rotation are (-4, 3).
To find the coordinates of each point after quadrilateral ABCD is rotated 270° counterclockwise about the origin, we can use the following formula:
(x', y') = (-y, x)
where (x, y) are the original coordinates of the point and (x', y') are the new coordinates after the rotation.
Starting with point A, which has coordinates (2, 1), we plug in the values into the formula:
(x', y') = (-y, x)
(-1, 2)
So the new coordinates for point A after the rotation are (-1, 2).
Moving on to point B, which has coordinates (4, 3), we apply the same formula:
(x', y') = (-y, x)
(-3, 4)
Therefore, the new coordinates for point B after the rotation are (-3, 4).
For point C, which has coordinates (5, 6), we get:
(x', y') = (-y, x)
(-6, 5)
Hence, the new coordinates for point C after the rotation are (-6, 5).
Finally, for point D, which has coordinates (3, 4), we have:
(x', y') = (-y, x)
(-4, 3)
So, the coordinates of each point after quadrilateral ABCD is rotated 270° counterclockwise about the origin are:
A' = (-1, 2)
B' = (-3, 4)
C' = (-6, 5)
D' = (-4, 3)
To learn more about : rotation
https://brainly.com/question/2078551
#SPJ11
a chain 18 feet long whose weight is 93 pounds is hanging over the edge of a tall building and does not touch the ground. how much work is required to lift the entire chain to the top of the building? your answer must include the correct units. (you may enter lbf or lb*ft for ft-lb.)
The work required to lift the entire chain to the top of the building is 1,662.9 ft-lbs.
The work required to lift the chain to the top of the building is equal to the potential energy gained by the chain, which is given by
potential energy = mass × gravity × height
where mass is the mass of the chain, gravity is the acceleration due to gravity (32.2 ft/s^2), and height is the length of the chain (18 feet) since it is being lifted vertically.
First, we need to find the mass of the chain. We can use the fact that the weight of the chain is 93 pounds to find the mass using the formula
weight = mass × gravity
Rearranging this formula to solve for mass, we get
mass = weight / gravity
Substituting the given values, we get
mass = 93 pounds / 32.2 ft/s^2 = 2.89 slugs
Now we can calculate the potential energy of the chain using the formula
potential energy = mass × gravity × height
Substituting the values we have calculated, we get
potential energy = 2.89 slugs × 32.2 ft/s^2 × 18 feet = 1,662.9 ft-lbs
Learn more about potential energy here
brainly.com/question/20349044
#SPJ4
Need help ASAP! I appreciate it!
pls pls help help now offering brainliest
Answer:
6000
Convert 8 and 10 to a decimal
8=0.8
10=0.1
0.1*0.8=0.8
4800/0.8=6000
Step-by-step explanation:
Hope this helps! =D
Mark me brainliest! =D
What is the range for the parabola below:
a. (-∞, -2)
b. [-2, + ∞)
c. (-∞, + ∞)
d. (-2, + ∞)
The range of the parabola is (-∞, -2). So correct option is A.
Describe Parabola?A parabola is a U-shaped curve that is defined by a quadratic equation of the form y = ax² + bx + c, where a, b, and c are constants. The graph of a parabola is symmetric around a vertical line called the axis of symmetry, which passes through the vertex of the parabola. The vertex is the point on the parabola where it changes direction.
The shape and position of a parabola depend on the values of the coefficients a, b, and c. If a is positive, the parabola opens upward, and if a is negative, the parabola opens downward. The value of b determines the horizontal position of the vertex, and the value of c determines the vertical position of the vertex.
Parabolas have many applications in mathematics, physics, engineering, and other fields. For example, the trajectory of a projectile launched into the air can be modeled by a parabolic curve, and the reflector dish of a satellite dish antenna is shaped like a parabolic curve to focus incoming signals at a single point.
The range of the parabola is (-∞, -2). So correct option is A.
To know more about range visit:
https://brainly.com/question/20791310
#SPJ1
Hey Siri bus travel six blocks is in a blast nine each block is 100 m long if the bus travels this distance in 15 minutes what is the average speed of the bus
The average speed of the bus is 600 meters / 900 seconds = 2/3 meters/second, or approximately 0.67 meters/second.
To find the average speed of the bus, we need to follow these steps:
1. Determine the total distance traveled:
Since each block is 100 meters long and the bus travels 6 blocks, the total distance is 6 blocks * 100 meters/block = 600 meters.
2. Determine the total time taken: .
The bus travels this distance in 15 minutes, so we need to convert this time to seconds.
Since there are 60 seconds in a minute, the total time taken is 15 minutes * 60 seconds/minute = 900 seconds.
3. Calculate the average speed:
The average speed is the total distance traveled divided by the total time taken.
For similar question on speed.
https://brainly.com/question/30249508
#SPJ11
what is the Value of G
Explain
Hint: vertical Angles
Answer:
Its value is approximately:
G = 6.6743 x 10^-11 m^3 kg^-1 s^-2
Step-by-step explanation:
The value of G is the gravitational constant, which is a physical constant that appears in the law of universal gravitation. Its value is approximately:
G = 6.6743 x 10^-11 m^3 kg^-1 s^-2
This value is used to calculate the force of gravitational attraction between two objects, given their masses and the distance between them. The gravitational constant is a fundamental constant of nature and is important in many areas of physics, including astrophysics, cosmology, and mechanics.