Use a double integral to find the area of the region inside the cardioid r=1+cosθ and outside the circle r=3cosθ.

Answer:

The answer is C. 700, infinity

The range of the given exponential function, which models the annual depreciation of a cellphone's purchase value, is (0,700]. This means that over time, as the phone loses value, its worth decreases from $700 to an amount close to $0, but never quite hitting $0.

The range of an exponential function, in this case, refers to all the possible values that the function f(x) can take, or basically, the values of the phone's worth. Since the cellphone purchases by Raven is decreasing in value due to depreciation, it initially starts at $700 but loses value each year. Given the model f(x) = 700(0.86)^x, once the depreciation begins (x > 0), the phone's value will always be less than $700 but never negative. Therefore, it will decrease annually towards 0 but never quite hit zero. Thus, the range of this exponential function is (0,700].

https://brainly.com/question/35259468

#SPJ2

The dimensions of the rectangular metal tank that requires the least material to build are approximately 7.58 feet by 7.58 feet by 7.58 feet.

Let the length, width, and height of the tank be L, W, and H, respectively. Since the tank has an open top, its volume is given by V = LWH. We are given that V = 364.5 cubic feet. We want to minimize the surface area of the tank, which is given by A = 2LW + 2LH + 2WH.

To minimize A, we can use the volume constraint to eliminate one of the variables. Solving for one of the variables, say H, we get H = V/LW. Substituting this into the equation for A, we get A(L,W) = 2LW + 2V/L + 2V/W. To minimize A, we take partial derivatives with respect to L and W and set them equal to zero. This gives us the system of equations:

2 + 2V/L^2 = 0

2 + 2V/W^2 = 0

Solving for L and W, we get L = W = sqrt(V/2) = 7.58 (rounded to two decimal places). Substituting these values into the equation for H, we get H = V/LW = 7.58. Therefore, the dimensions of the tank that require the least amount of material to build are approximately 7.58 feet by 7.58 feet by 7.58 feet.

For more questions like Volume click the link below:

https://brainly.com/question/1578538

#SPJ11

The tank that requires the least amount of material to build has Length = 1 ft. Width = 1 ft. Height = 364.5 ft

To find the dimensions of the tank that require the least amount of material to build, we need to minimize the surface area of the tank while keeping its volume constant.

Let's denote the length, width, and height of the tank as L, W, and H, respectively.

The volume of a rectangular tank is given by:

Volume = Length × Width × Height

In this case, the volume is given as 364.5 cubic feet:

364.5 = L × W × H

The surface area of a rectangular tank can be calculated by considering the four sides and the bottom:

Surface Area = 2(LW + LH + WH)

We need to minimize the surface area while keeping the volume constant. To achieve this, we can express one of the dimensions in terms of the other two using the volume equation and substitute it into the surface area equation.

From the volume equation, we can express H in terms of L and W:

H = 364.5 / (LW)

Substituting this value of H into the surface area equation, we have:

Surface Area = 2(LW + L(364.5 / (LW)) + W(364.5 / (LW)))

Simplifying further:

Surface Area = 2(LW + 2 * 364.5 / W + 2 * 364.5 / L)

To find the dimensions that minimize the surface area, we need to differentiate the surface area equation with respect to L and W and set the derivatives equal to zero.

Differentiating with respect to L:

d(Surface Area) / dL = 2W - (2 * 364.5 / L^2) = 0

Differentiating with respect to W:

d(Surface Area) / dW = 2L - (2 * 364.5 / W^2) = 0

Solving these equations will give us the values of L and W that minimize the surface area.

2W - (2 * 364.5 / L^2) = 0

2L - (2 * 364.5 / W^2) = 0

Simplifying:

W = 364.5 / L^2

L = 364.5 / W^2

Substituting these expressions into the volume equation:

364.5 = (364.5 / L^2) * L * W

364.5 = 364.5 / L * W

Simplifying:

L * W = 1

This implies that the product of the length and width is equal to 1.

Since we want to minimize the amount of material used, we can set one of the dimensions to 1 and solve for the other dimension.

Let's set W = 1:

L * 1 = 1

L = 1

Therefore, the dimensions that require the least amount of material to build the tank are:

Length = 1 ft

Width = 1 ft

Height = 364.5 ft

Learn more about material at https://brainly.com/question/16974466

#SPJ11

A 90% confidence interval for the mean of the population is (499.39, 532.99).

To find a 90% confidence interval for the mean of the population, we can use the formula:

CI = x ± zα/2 * σ/√n

where x is the sample mean, σ is the population standard deviation, n is the sample size, and zα/2 is the critical value for a level of significance α/2.

First, we need to calculate the sample mean and standard deviation:

x = (516 + 536 + ... + 509 + 587) / 87 = 516.19

s = 28

Next, we need to find the critical value for a 90% confidence interval. Using a standard normal distribution table or calculator, we find that zα/2 = 1.645.

Substituting these values into the formula, we get:

CI = 516.19 ± 1.645 * 28 / √87

= (499.39, 532.99)

Therefore, we can be 90% confident that the true population mean lies within the interval (499.39, 532.99).

Learn more about confidence interval at https://brainly.com/question/14791149

#SPJ11

At the bus station, there are eight lines for arriving passengers, each staffed by a single worker. The arrival rate for passengers is 124 per hour, which means the arrival rate per minute is 124/60 = 2.067 passengers per minute. Each passenger takes an average of 3 minutes for a worker to process, so the service rate per worker is 1/3 = 0.333 customers per minute.

Since there are eight workers, the combined service rate for all workers is 8 * 0.333 = 2.664 customers per minute. The coefficient of variation for arrival time is 1.4, and the coefficient of variation for service time is 1.

To find the average number of customers in the queue, we can use the formula:

Lq = (Ca^2 + Cs^2) * (λ^2) / (2 * (µ - λ))

Where Lq is the average number of customers in the queue, Ca is the coefficient of variation for arrival time, Cs is the coefficient of variation for service time, λ is the arrival rate, and µ is the service rate.

Lq = (1.4^2 + 1^2) * (2.067^2) / (2 * (2.664 - 2.067))
Lq = (1.96 + 1) * (4.276) / (2 * 0.597)
Lq ≈ 7.34 customers in the queue

To find the average time a customer spends in the queue, we can use the formula:

Wq = Lq / λ

Wq = 7.34 / 2.067
Wq ≈ 3.55 minutes

On average, customers spend approximately 3.55 minutes in the queue.

To learn more about coefficients visit;

https://brainly.com/question/28975079

#SPJ11

Using the exponential distribution formula:

(a) P(X < 25) =0.3935, P(X > 15) = 0.2231 and P(15 < X < 25) = 0.1704

(b) The 40th percentile is 29.15 minutes

a) Using the exponential distribution formula:

P(X < 25) = 1 - [tex]e^{(-25/20)}[/tex]= 0.3935

P(X > 15) = [tex]e^{(-15/20)}[/tex] = 0.2231

P(15 < X < 25) = P(X < 25) - P(X < 15) = (1 - [tex]e^{(-25/20)}[/tex]}) - (1 - [tex]e^{(-15/20)}[/tex]) = 0.1704

b) The 40th percentile is the value x such that P(X < x) = 0.40. Using the exponential distribution formula:

0.40 = 1 - [tex]e^{(-x/20)}[/tex]

Solving for x:

[tex]e^{(-x/20)}[/tex]= 0.60

-x/20 = ln(0.60)

x = -20 ln(0.60) = 29.15

Therefore, the 40th percentile is 29.15 minutes.

To know more about exponential distribution refer here:

https://brainly.com/question/22692312

#SPJ11

The value of the function f(x)=y(x)/ln(x) at x=2 is 92.85

First, we need to find the general solution of the differential equation [tex]x^2[/tex]y" - 6xy' + 10y = 0. We can assume a solution of the form y(x) = [tex]x^r[/tex] and substitute it into the differential equation:

[tex]x^2y" - 6xy' + 10y = r(r-1)x^r - 6rx^r + 10x^r = 0[/tex]

Simplifying, we get the characteristic equation:

r(r-1) - 6r + 10 = 0

[tex]r^2 - 7r + 10 = 0[/tex]

(r-2)(r-5) = 0

Therefore, the general solution is of the form [tex]y(x) = c1x^2 + c2x^5[/tex], where c1 and c2 are constants.

Using the initial conditions y(1) = 0 and y'(1) = 1, we can solve for the constants:

y(1) = c1 + c2 = 0

y'(1) = 2c1 + 5c2 = 1

Solving the system of equations, we get c1 = -5/7 and c2 = 5/7.

So, the solution to the differential equation with the given initial conditions is [tex]y(x) = (-5/7)x^2 + (5/7)x^5 + 3x^5/ln(x).[/tex]

To find the value of f(x) = y(x)/ln(x) at x = 2, we can simply substitute x = 2 into the expression for y(x) and divide by ln(2):

f(2) = [tex][(-5/7)(2^2) + (5/7)(2^5) + 3(2^5)/ln(2)] / ln(2)[/tex]

= (20/7 + 80/7 + 96)/ln(2)

= 92.85

To know more about function, refer to the link below:

https://brainly.com/question/31425688#

#SPJ11

The local maximum is at x = -3.
The local minimum is at x = 1/2.

The intervals of increase are (-∞, -3) and (1/2, ∞).
The interval of decrease is (-3, 1/2).

To find the local maxima and minima of the function, we need to analyze the derivative f'(x) = (2x - 1)(x + 3).

Step 1: Find critical points by setting the derivative equal to zero.
(2x - 1)(x + 3) = 0

This gives us two critical points: x = 1/2 and x = -3.

Step 2: Determine the intervals of increase and decrease using the critical points.
Test points in each interval:
- For x < -3, choose x = -4: f'(-4) = (2(-4) - 1)((-4) + 3) = (-9)(-1) > 0, so the function is increasing on the interval (-∞, -3).
- For -3 < x < 1/2, choose x = 0: f'(0) = (2(0) - 1)((0) + 3) = (-1)(3) < 0, so the function is decreasing on the interval (-3, 1/2).
- For x > 1/2, choose x = 1: f'(1) = (2(1) - 1)((1) + 3) = (1)(4) > 0, so the function is increasing on the interval (1/2, ∞).

Step 3: Identify local maxima and minima.
- The function changes from increasing to decreasing at x = -3, so there is a local maximum at x = -3.
- The function changes from decreasing to increasing at x = 1/2, so there is a local minimum at x = 1/2.

In summary:
- The local maximum is at x = -3.
- The local minimum is at x = 1/2.
- The intervals of increase are (-∞, -3) and (1/2, ∞).
- The interval of decrease is (-3, 1/2).

Learn more about local maxima and minima :

https://brainly.com/question/29167373

#SPJ11

The probability that he or she can speak french or german is 8/25.

Let F be the event that a student can speak French, G be the event that a student can speak German, and F ∩ G be the event that a student can speak both French and German. We want to find the probability that a student can speak French or German, which is P(F ∪ G).

We can use the inclusion-exclusion principle to calculate P(F ∪ G):

P(F ∪ G) = P(F) + P(G) - P(F ∩ G)

We are given that P(F) = 26/100, P(G) = 12/100, and P(F ∩ G) = 6/100. Substituting these values into the formula above, we get:

P(F ∪ G) = 26/100 + 12/100 - 6/100 = 32/100 = 8/25

Therefore, the probability that a student can speak French or German is 8/25.

Read more about probability on:

brainly.com/question/24756209

#SPJ11

The magnitude of the moment about the y-axis is the absolute value of the y-component, which is 320.

Option B is the correct answer.

We have,

The position vector is given by the coordinates of the point of application of the force, which is (4,-6,4).

So, the position vector r.

r = <4, -6, 4>

Next, we need to find the cross product of the position vector r and the force vector F to get the moment vector M.

The moment vector.

M = r x F

where x denotes the cross product.

We are given the x and y components of the force, but not the z component.

However, we know that the magnitude of the force is 500, which means that:

|F| = sqrt(Fx^2 + Fy^2 + Fz^2) = 500

Substituting Fx and Fy in the equation above, we get:

sqrt(300^2 + 200^2 + Fz^2) = 500

Simplifying, we get:

Fz^2 = 120000

Fz = 346.41 (approx)

The force vector.

F = <300, 200, 346.41>

Now, we can calculate the moment vector M as follows:

M = r x F

= <4, -6, 4> x <300, 200, 346.41>

= <-800, 320, -200>

The moment vector has components of -800, 320, and -200 along the

x, y, and z axes, respectively.

Thus,

The magnitude of the moment about the y-axis is the absolute value of the y-component, which is 320.

Learn more about moment vectors here:

https://brainly.com/question/30897767

#SPJ4

The given value which is 0.3282828... can be expressed as 1457/2500 in p/q form.

To express 0.3282828... as a fraction in p/q form, we need to find a pattern in the decimal representation. Notice that the repeating portion of the decimal is 0.2828..., which we can represent as x. Therefore, we have:

0.3282828... = 0.3 + x

x = 0.282828...

Now, we can multiply both sides of the equation by 100 to get rid of the decimal points:

100(0.3 + x) = 30 + 100x

28.2828... = 100x

Solving for x, we get:

x = 28.2828.../100 = 2828/10000

Therefore, we can express 0.3282828... as a fraction in p/q form:

0.3282828... = 0.3 + x = 3/10 + 2828/10000 = (3000 + 2828)/10000 = 5828/10000

To simplify the fraction, we can divide both the numerator and denominator by their greatest common factor, which is 4. This gives us:

0.3282828... = 5828/10000 = 1457/2500

To learn more about expression click on,

https://brainly.com/question/29052794

#SPJ1

Complete question is:

Express 0.3282828……. in p/q form, where p and q are integers and q ≠ 0.​

We can't find the exact values of x and y without more information. However, we know that y must be a negative number and x must be more than three times that negative number plus a positive constant.  To solve this problem, we can use algebraic equations. Let's call the first number "x" and the second number "y".

From the problem, we know that:

- x is less than y
- x is more than 3 times y

We can write these statements as:

- x < y
- x > 3y

Now we need to solve for both x and y. One way to do this is to use substitution. We can rearrange the second equation to solve for x in terms of y:

x = 3y + c

where "c" is some constant. We don't know what "c" is yet, but we can use the first equation to help us find out.

If x is less than y, we can substitute "x" with the expression we just found:

3y + c < y

Now we can solve for y:

2y < -c

y < -c/2

So we know that y is negative and less than -c/2.

Next, we can use the second equation to solve for "c":

x > 3y

3y + c > 3y

c > 0

So "c" must be positive.

Putting it all together, we know that:

- y is negative and less than -c/2
- c is positive

Therefore, we can't find the exact values of x and y without more information. However, we know that y must be a negative number and x must be more than three times that negative number plus a positive constant.

learn more about algebraic equations here: brainly.com/question/24875240

#SPJ11

If you think that a 1% change in X leads to a certain percent change in Y, you may want to use a logarithmic transformation.

Specifically, you could take the natural logarithm of both X and Y, and then regress ln(Y) on ln(X). This will allow you to estimate the elasticity of Y with respect to X, which measures the percentage change in Y for a 1% change in X. Another option could be to use a power transformation, such as taking X to the power of a certain exponent (e.g. X^0.5) and regressing Y on this transformed X variable.

The choice of functional form will depend on the specific relationship between X and Y, as well as the assumptions and goals of your analysis.

For more about logarithmic transformation:

https://brainly.com/question/27754269

#SPJ11

The math function y(x) =  -0.2x4 e-0.5xx3 7x2:
x = 0:0.1:10; % example input values
y = compute_ y(x); % compute the function output for each x value
plot(x, y); % plot the function

1. First, let's define the function in MATLAB using the "function" keyword. We'll name the function "y_of_x" and it will take the input "x".

```Matlab
function y = y_of_x(x)
```

```Matlab
function y = compute_y(x)
% This function computes y(x)=-0.2x^4 e^-0.5xx^3 7x^2
% Input:
%   x: the input to the function
% Output:
%   y: the output of the function

2. Now, let's represent the given math function inside the function. The math function is y(x) = -0.2x^4 * e^(-0.5x) * x^3 * 7x^2. In MATLAB, we can write this as:

```Matlab
y = -0.2 * x^4 * exp(-0.5 * x) * x^3 * 7 * x^2;
```

3. Finally, end the function with the "end" keyword.

```Matlab
end
```
Putting it all together, your user-defined MATLAB function will look like this:
```Matlab
function y = y_of_x(x)
   y = -0.2 * x^4 * exp(-0.5 * x) * x^3 * 7 * x^2;
end
```

Now you can use this function in MATLAB by calling it with the desired input value for "x", like this:
``Matlabb
result = y_of_x(2); % This will compute y(2) using the defined function
```

Learn more about function:

brainly.com/question/12431044

#SPJ11

The solution to the system of equations -3x+7y=-16 and -9x+5y=16 is x = -4 and y = -4.

To solve the system of equations -3x+7y=-16 and -9x+5y=16, we can use the elimination method.

First, we can multiply the first equation by 3 to make the coefficient of x equal to -9, which is the same as the coefficient of x in the second equation. This gives us:

-9x + 21y = -48

-9x + 5y = 16

Next, we can subtract the second equation from the first to eliminate x:

16y = -64

y = -4

Now that we know y, we can substitute it back into either of the original equations to solve for x. Let's use the first equation:

-3x + 7(-4) = -16

-3x - 28 = -16

-3x = 12

x = -4

Correct Question :

Solve for -3x+7y=-16 and -9x+5y=16.

To learn more about equations here:

https://brainly.com/question/29657983

#SPJ1

The width of the waiting area is 95 feet if the length of the area is 120 feet. Thus, option A is correct.

The area of the roller-coaster = 11,400 square feet

Length of area = 120 feet

The shape of Smiler roller coaster is rectangular-shaped. The area of the roller coaster can be calculated by using the product of length and width. The width of the roller coaster is calculated by dividing the total area by length.

Mathematically, the formula is:

width = area/length

width = 11,400 / 120

width = 95 feets

Therefore, we can conclude that the width of the waiting area is 95 feet.

To learn more about Rectangle

https://brainly.com/question/9387981

#SPJ4

Based on the sampling distribution provided, it appears that births are not equally likely across the days of the week. The highest frequency of births occurred on Tuesday with 32 births, while the lowest frequency occurred on Sunday with 13 births.

However, to determine if this result is statistically significant, further analysis such as a chi-squared test or a hypothesis test would need to be conducted.
 

Based on your question, it seems that you want to know if births are equally likely across the days of the week. Using the random sample of 150 births and the sampling distribution provided in the table, you can analyze the data to determine if there is a significant difference in the number of births on each day.

To do this, you can perform a chi-square test which compares the observed frequencies (number of births on each day) to the expected frequencies (equal distribution of births across the week). If the chi-square value is significantly high, it indicates that the distribution of births is not equal across the days of the week.

However, without the actual data in the table, I am unable to perform the chi-square test for you. If you can provide the numbers in the table, I would be happy to help further!

Visit here to learn more about chi-square test  : https://brainly.com/question/14082240
#SPJ11

The area of the triangle with a base of 48ft and height 18ft is 432 ft².

A triangle is simply three-sided polygon having three edges and three vertices.

The area of a triangle can be expressed as:

Area = 1/2 × base × height.

From the diagram:

To solve for the area of the triangle, plug the given values into the above formula and simplify.

Area = 1/2 × base × height.

Area = 1/2 × 48ft × 18ft

Area = 432 ft²

Therefore, the area is 432 square feet.

Learn more about area of triangle here: https://brainly.com/question/29156501

#SPJ1

This equation holds true, which confirms y2 = x^4 as a solution. Therefore, both y1 = x^(-1) and y2 = x^4 are valid solutions to the homogeneous Euler-Cauchy equation provided.

You are given that two solutions of the homogeneous Euler-Cauchy equation are y1 = x^(-1) and y2 = x^4. The general form of the Euler-Cauchy equation is: x^2 * y''(x) + p * x * y'(x) + q * y(x) = 0

To confirm the given solutions are correct, we need to substitute y1 and y2 into the equation and check if the equation holds true (i.e., equals zero). For y1 = x^(-1), we first find its derivatives: y1'(x) = -x^(-2) y1''(x) = 2x^(-3)

Now, substitute y1 and its derivatives into the Euler-Cauchy equation: x^2 * (2x^(-3)) - 2 * x * (-x^(-2)) - 4 * (x^(-1)) = 0 Simplifying the equation: 2 - 2 + 4 = 0

This equation holds true, which confirms y1 = x^(-1) as a solution. For y2 = x^4, we find its derivatives: y2'(x) = 4x^3 y2''(x) = 12x^2 Now, substitute y2 and its derivatives into the Euler-Cauchy equation: x^2 * (12x^2) - 2 * x * (4x^3) - 4 * (x^4) = 0

Simplifying the equation: 12x^4 - 8x^4 - 4x^4 = 0

Visit here to learn more about Euler- Cauchy Equation:

brainly.com/question/31684210

#SPJ11

The point estimate of the proportion of the population that would provide yes responses can be calculated by dividing the number of yes responses in the random sample by the size of the sample.

Therefore, the point estimate is 150/500 = 0.30 or 30% (to 2 decimals). It's important to note that this estimate is based on a random sample and may differ from the actual proportion of the population.

Step 1: Identify the number of yes responses (150) and the total number of individuals in the sample (500).

Step 2: Calculate the proportion by dividing the number of yes responses by the total number of individuals in the sample. In this case, it would be 150 divided by 500.

Step 3: Convert the proportion to a decimal by performing the division. This will give you 0.3.

Step 4: Round the decimal to 2 decimal places, as requested. In this case, 0.3 is already rounded to two decimal places.

So, the point estimate of the proportion of the population that would provide yes responses is 0.30 (to 2 decimals), based on the random sample provided.

To know more about the proportion of the population:- https://brainly.com/question/15087042

#SPJ11

the correct option is:

b. No horizontal asymptote. Vertical asymptotes \(x = 3\) and \(x = -2\)

To find the asymptotes of the function \(f(x) = \frac{7x^2+x+3}{(x-3)(x+2)}\), we can analyze the behavior of the function as \(x\) approaches certain values.

1. Vertical Asymptotes:

Vertical asymptotes occur when the denominator of the function approaches zero, but the numerator does not. So, set the denominator equal to zero and solve for \(x\):

\(x - 3 = 0\) \(\implies x = 3\)

\(x + 2 = 0\) \(\implies x = -2\)

Therefore, there are vertical asymptotes at \(x = 3\) and \(x = -2\).

2. Horizontal Asymptote:

To determine the horizontal asymptote, we examine the degrees of the numerator and denominator. Since the degree of the numerator (2) is equal to the degree of the denominator (2), we need to compare the leading coefficients of both.

The leading coefficient of the numerator is 7, and the leading coefficient of the denominator is 1. Thus, there is a horizontal asymptote at \(y = \frac{7}{1} = 7\).

3. Slant Asymptote:

To determine if there is a slant asymptote, we divide the numerator by the denominator using polynomial long division or synthetic division:

```

    7x + 22

---------------

(x - 3)(x + 2) | 7x^2 +  x + 3

    -7x^2 - 14x

    ------------

            15x + 3

            -15x - 30

            ------------

                 33

```

The quotient is \(7x + 22\) with a remainder of 33. Since the remainder is not zero, there is no slant asymptote.

To know more about asymptotes refer here

https://brainly.com/question/32038756#

#SPJ11

Area is about 254.3 square [tex]mm^2[/tex]

To discover the area of a circle, you want to apply the formulation A = π[tex]r^2[/tex], where A is the area and r is the radius.

In this example, we have a circular item with a radius of nine millimeters. To find the area, we will plug that value into the formulation and use 3.14 as an approximation for pi.

A = 3.14 x [tex]9^2[/tex]

A = 3.14 x 81

A = 254.34

So the area of the circular object is about 254.3 square millimeters while rounded to the nearest 10th.

It's far essential to remember to consist of the units, that are square millimeters in this example.

Learn more about area of a circle formula:-

https://brainly.com/question/14068861

#SPJ4

The time response of the output is 0.2 minutes.

The characteristic equation of the homogeneous differential equation is:

20r² + 9r + 1 = 0

Using the quadratic formula, we find that the roots of this equation are:

r₁ = -0.225 and r₂ = -0.025

To find the particular solution, we assume that m is constant and substitute m = 2/20 = 0.1 into the non-homogeneous differential equation. Then, we solve for y_p(t) by using undetermined coefficients:

y_p(t) = 0.2

To apply the Euler method, we first rewrite the differential equation in the form:

d²y/dt² = (2/20 - 9/20 * dy/dt - 1/20 * y)/20

Then, we can approximate the derivative using the forward difference formula:

dy/dt ≈ (y(t+Δt) - y(t))/Δt

d²y/dt² ≈ (dy/dt(t+Δt) - dy/dt(t))/Δt

Substituting these approximations into the differential equation, we get:

(y(t+Δt) - 2y(t) + y(t-Δt))/Δt² = (2/20 - 9/20 * (y(t+Δt) - y(t))/Δt - 1/20 * y(t))/20

Solving for y(t+Δt), we get:

y(t) - y(t-Δt)) + (9/20Δt * y(t) - 9/20Δt * y(t+Δt)) + (1/20Δt² * y(t))

Starting from the initial conditions y(0) = 0 and dy/dt(0) = 0, we can use this formula to compute y at each time step.

Specifically, we can compute y(Δt), y(2Δt), ..., y(5) using the Euler method with a step size of 0.2 minutes.

To know more about Euler method here

https://brainly.com/question/14309211

#SPJ4

Therefore, the probability of choosing a number that is more than 4 or odd is  1 or 100%.

To find the probability that the number chosen is more than 4 or odd, we need to add the probabilities of choosing a number that is more than 4 and the probability of choosing a number that is odd and subtract the probability of choosing a number that is both more than 4 and odd, since we would be double-counting this case.

The numbers more than 4 are 5, 6, 7, 8, 9, and 10. The odd numbers are 1, 3, 5, 7, and 9. The number that satisfies both conditions is 5, so we must subtract the probability of choosing 5 once.

Therefore, the probability of choosing a number that is more than 4 or odd is:

(6 + 5 - 1) / 10

= 10/10

= 1

So the probability is 1 or 100%.

To know more about probability,

https://brainly.com/question/30034780

#SPJ11

The dimension of pool is (3x+4), the correct option is A.

We are given that;

The cubic polynomial  3x^3-18x2+4x-24

Now,

x2−8=(x+√8)(x−√8)

Hence, we have factored the polynomial completely as:

3x3−18x2+4x−24=(x+4)(3)(x+√8)(x−√8)

One of these factors must be one of the dimensions of the pool. Since we are looking for a rational number, we can eliminate x+√8 and x−√8. The remaining options are x+4 and 3.

Therefore, by the volume the answer will be (3x+4).

Learn more about volume;

https://brainly.com/question/1578538

#SPJ1

An equation that shows the relationship between the two angle measure is 3x + 2 = 180 and the value of x is 59.

Let us consider the two supplementary angles with measures (x + 1) and (2x + 1). Since they are supplementary angles, we know that their sum is equal to 180 degrees. We can write this relationship between the two angle measures as an equation:

(x + 1) + (2x + 1) = 180

Simplifying this equation, we get:

3x + 2 = 180

Now, we can solve for x by isolating it on one side of the equation. To do this, we can subtract 2 from both sides of the equation:

3x = 178

Finally, we can solve for x by dividing both sides of the equation by 3:

x = 59.33

Therefore, we should round the value of x to the nearest whole number, which is 59.

To know more about equation here

https://brainly.com/question/10413253

#SPJ1

The measure of the angle BC will be ∠BC = 72°.

A chord of a circle is a straight line segment that connects two points on the circle's circumference. The length of a chord is the distance between the two points.

The portion of a straight line that joins two points on a circle is known as the chord's length. It is the longest distance between the two points on the circle. The radius of the circle and the separation between the two spots on the circle determine the chord's length.

The angle BC will be calculated as,

∠BC = ( ∠BDC / 180 ) x π

∠BC = (72 / 180 ) x π

∠BC = 72°

Therefore, the value of angle BC will be 72°.

To know more about the chord of a circle follow

https://brainly.com/question/17023621

#SPJ1