Answer:
because they may not actually be moving be just percieved as so
Explanation:
Answer:
i think that maybe there arent moving but there on something thats moving
Explanation:
A 6 kg bowling ball is lifted 1.2 m into a storage rack. The acceleration of gravity is 9.8 m/s² Calculate the increase in the ball's potential energy. Answer in units of J.
Answer:
70.56 J
Explanation:
Gravitational Potential Energy= mass×gravitational pull× height
= 6×9.8×1.2= 70.56 J
Grandma Sue (mass 80 kg) and her grandson James (mass 40 kg) are on a smooth icy surface. As Grandma Sue whizzes around the icy surface at 3 m/s in a straight line, she is suddenly confronted with scared James standing at rest directly in her path. Rather than knock him over, she picks him up and continues her uniform motion in a straight line without braking. Find the speed of Grandma Sue and James after the collision.
Answer:
v = 2 m/s
Explanation:
Here, we will use the law of conservation of momentum to solve this problem:
[tex]m_1u_1 + m_2u_2 = m_1v_1+m_2v_2[/tex]
where,
m₁ = mass of grandma = 80 kg
m₂ = mass of James = 40 kg
u₁ = initial speed of grandma = 3 m/s
u₂ = initial speed of James = 0 m/s
v₁ = v₂ = v = final speed of grandm and James = ?
Therefore,
[tex](80\ kg)(3\ m/s)+(40\ kg)(0\ m/s)=(80\ kg)(v)+(40\ kg)(v)\\\\(120\ kg)v = 240\ Ns\\\\v = \frac{240\ N.s}{120\ kg}\\[/tex]
v = 2 m/s
A iguana runs back and forth along the ground. The horizontal position of the iguana in meters over time is shown
What is the displacement of the iguana between 3 s and 6 s?
m
What is the distance traveled by the iguana between 3 s and 6 s?
The displacement of the iguana between 3 s and 6 s is 6.71 meters.
The distance traveled by the iguana between 3 s and 6 s is 8.08 meters.
What are distance and displacement?Distance is the sum of an object's movements, regardless of direction.
The term "displacement" refers to a shift in an object's position.
According to the graph:
The displacement of the iguana between 3 s and 6 s
= √{ (3-6)²+(6-0)²} meters
= 6.71 meters.
The distance traveled by the iguana between 3 s and 6 s
= [ √{ (3-5)²+(6-6)²} +√{ (5-6)²+(6-0)²}] meters
= [2+ 6.08] meters
= 8.08 meters.
Learn more about displacement here:
https://brainly.com/question/11934397
#SPJ1
What will be the linear expansion of a piece of wrought iron 8 feet long if it’s temp is raised 70 degrees F?
The linear expansion of the wrought iron is 0.0038 feet.
What is the linear expansion of the wrought iron?
The linear expansion of the wrought iron is the increase in length of the wrought iron due to change or increase in temperature.
Mathematically, the formula for the linear expansion of metals is given as;
ΔL = αLΔθ
where;
ΔL is the linear expansion of the metalα is the coefficient of thermal expansion of the metalL is the original length of the metalΔθ is the change in temperature of the metalThe coefficient of thermal expansion of wrought iron = 0.0000067 / ⁰F
The linear expansion of the wrought iron is calculated as follows;
ΔL = αLΔθ
ΔL = ( 0.0000067/ ⁰F x 8 ft x 70 ⁰F )
ΔL = 0.0038 ft
Thus, the linear expansion of the wrought iron is a function of the increase in temperature of the iron and the original length of the iron.
Learn more about linear expansion here: https://brainly.com/question/14325928
#SPJ1
examine the following graph.
a) What is the amplitude of the oscillation?
b) What is the period of the oscillation?
3 ) find the electrical force between the two charges Q1=3mc ,Q2=-6mc when they are 0.3 m parted ?
find the amount of the force when Q1 is doubled ?
Answer:
F = 3.6 10⁶ N
Explanation:
The expression for the electric force is
F = [tex]k \ \frac{q_1 q_2}{r^2}[/tex]
in this case it indicates that the charge q1 is doubled
q₁ = 2 3 10⁻³ C
q₁ = 6 10⁻³ C
let's reduce the magnitudes to the SI system
q₂ = 6 10⁻³ C
r = 0.3 m
let's calculate
F = 9 10⁹ 6 10⁻³ 6 10⁻³ / 0.3²
F = 3.6 10⁶ N
3. Which of the forms of electromagnetic radiation listed below has the greatest energy?
Ogamma rays
O infrared
O ultraviolet
radio waves
Answer:
Choice A. gamma rays
Explanation:
in v-belts the contact between the pulley and the belt is at the
Answer:
Is at the pivot of the wheel
Which of the following is the only group in mission control that gets to communicate with the astronauts in space?
Flight Director
CAPCOM
Senior Flight Controller
Lead Ground Astronaut
Capsule communicator or Capcom is the only group in mission control that gets to communicate with the astronauts in space. Hence, option (B) is correct.
What is capsule communicator or Capcom?The capsule communicator, or Capcom, was the only voice that spoke to the astronauts during their trip to avoid any mistake. To ensure that the men in the capsule always had a familiar individual who understood their situation and could provide the information they required, Capcom was always manned by astronauts.
Both the technical control team on the ground and the astronauts in space are represented by Capcom.
Learn more about Capcom here:
https://brainly.com/question/27805681
#SPJ1
Part A
What is the radius of the hydrogen-atom Bohr orbit shown in the figure? (Figure 1)
r = ____ nm
The radius of the hydrogen-atom Bohr orbit shown in the figure is 5.3 nm.
What is Bohr orbit?The path that hypothetical electrons take around the nucleus is known as Bohr's orbit.
These orbits are described by Bohr in his hypothesis of the structure of an atom as energy levels or shells where electrons move in a fixed circle around the nucleus.
These orbits resemble solar system orbits, with the exception that they are attracted by electrical forces rather than gravity. The term "ground state" refers to the amount of energy that an electron typically occupies.
Learn more about Bohr orbit here:
https://brainly.com/question/17308813
#SPJ1
Why is Energy, Work and Power all Scalar Quantity?
Answer:
Explanation:
We already know that Force is a vector. Weight being a force, is also a vector quantity. Displacement is distance in a specific direction, hence it is a vector quantity too. ... since energy, work done and time are scalar, Power is a scalar quantity
A 4.51 kg object is placed upon an inclined plane which has an incline angle of 23.0*. The object slides down the inclined plane with a constant speed. Find the normal force, friction force and the coefficient of sliding friction
To find the normal force, we can use the equation: normal force = weight + friction force * cos(incline angle).
How to find the normal force ?The weight of the object is (4.51 kg) * (9.8 m/s^2) = 44.398 NTo find the friction force, we can use the equation: friction force = coefficient of friction * normal force.We can assume that the friction force is equal to the force of gravity acting against the object because it is moving down the inclined plane at a constant pace. As a result, the friction force is equal to the product of the object's weight and sin (incline angle)Friction force is equal to (9.927 N)*sin(23.0)*(44.398 N)We can use the following equation to determine the coefficient of sliding friction:friction coefficient is calculated as friction force divided by normal force.coefficient of sliding friction = 9.927 N /44.398 N = 0.224Therefore, the normal force is 44.398 N, the friction force is 9.927 N, and the coefficient of sliding friction is 0.224.To know more about normal force , check out :
https://brainly.com/question/15199961
#SPJ1
It’s bungee jumping skydiving and hiking
A mechanic pushes a 3540 kg car from rest to a speed of v, doing 4864 J of work in the process. Find the speed v. Neglect friction between car and road. Answer in units of m/s.
Answer:
1.66 m/s
Explanation:
Work or kinetic energy = [tex]\frac{1}{2} mv^{2}[/tex]
[tex]4864=\frac{1}{2} (3540)v^{2}[/tex]
v = 1.66 m/s
a stage light uses a white lamp wgat color of light will be seen when
a yellow filter is used
an orange filter is used
Answer:
Explanation:
When a yellow filter is used, the stage light will appear yellow because the filter absorbs all colors of light except for yellow, which it allows through. When an orange filter is used, the stage light will appear orange for the same reason.
It is important to note that the color of the lamp itself will not change, but the light that is seen by the observer will appear to be the color of the filter due to the absorption and transmission properties of the filte
14.According to the graph how far does the person travel in the first 5
seconds
2 points
Your answer
6
Displacement (m)
1
2
4 5 6 7 8 9 10 11 12 13
Time (s)
Answer:
d = 5 m
Explanation:
In this exercise we have a graph of displacement against time, the graph being a line, so the body has a uniform movement, the speed of the person is
v = [tex]\frac{\Delta x}{\Delta t}[/tex]
v =[tex]\frac{5-0}{5-0}[/tex] (5-0) / (5-0)
v = 1 m / s
therefore the displacement is
d = v t
d = 1 5
d = 5 m
A monkey (mass m) is swinging on a vine of length L while carrying a bunch of bananas (a large bunch, mass m/2). His swinging motion has period T and reaches maximum height during the swing h (measured from the bottom of his arc of motion). He accidentally lets go of his bananas when he is at a height of h/2. What happens to the amplitude and period of his oscillation as a result? Explain.
Answer:
Explanation:
The period of oscillation will remain unchanged because the period of oscillation of a pendulum does not depend upon the mass of the bob . Here monkey along with bunch of banana represents bob .
When the monkey and banana were at height h /2 , they have potential energy as well as kinetic energy . banana is separated from the system . It carried its total energy along with it . But the energy of monkey remained intact with it . So it will keep on moving as usual . So it will attain the same maximum height as before .
Hence the amplitude of oscillation too will remain unchanged .
Kind of energy a piece of radioactive metal contains
Answer:
Radioactive materials give off a form of energy called ionizing radiation.
Some bat species have auditory systems that work best over a narrow range of frequencies. To account for this, the bats adjust the sound frequencies they emit so that the returning, Doppler-shifted sound pulse is in the correct frequency range. As a bat increases its forward speed, should it increase or decrease the frequency of the emitted pulses to compensate?
Answer:
As a bat increases its forward speed, it should decrease the frequency of the emitted pulses to compensate.
decrease
Explanation:
Decreasing the frequency of the emitted pulse will help the bat reduce its frequency caused by its forward motion. The forward motion shifts the bat's auditory frequency to a higher frequency; consequently, the bat should adjust downwards the frequency of the emitted pulse so the reflected pulse will be in the correct frequency range.
brandon buys a new seadoo. he goes 12km north from the beach he jumps wakes for 6km to the east what distance did he cover what was his displacement
Total distance covered by Brandon is 18 km and total displacement covered by him is 13.41 km.
Displacement: What is it?The definition of displacement is the changing of an object's position. It has a magnitude and direction and is a vector quantity. It is shown as an arrowhead that travels from the initial location to the end. An object's position changes, for instance, if it moves from position A to position B.
Distance covered by Brandon is-
12 + 6 = 18 km
Displacement covered by Brandon is-
d²= 12² + 6²
= 144 + 36
d²= 180
d = √180
d = 13.41 km.
To know more about displacement visit :
brainly.com/question/28609499
#SPJ1
Anna litic and Noah formula how place a 1.50 kg brick on a wooden board and incline the board at 34.4* above the horziontal. The coefficient of friction between the brick and the board is 0.350. determine the force of gravity, parallel component of gravity and the perpendicular component of gravity. Please also find net force and acceleration
The force due to gravity here is 14.7 N. The net force acting on the brick is 9.5 N and the acceleration of the brick is then 6.3 m/s².
What is frictional force?Friction is a resistive force which opposes the motion of an object. The product of normal force by gravity and frictional coefficient gives the frictional force.
Given that, mass = 1.50 Kg
force by gravity = mg = 1.50 × 9.8 m/s² = 14.7 N
parallel component = 14.7 cos 34.4 = 12.12 N
perpendicular component = 14.7 sin 34.4 = 8.30 N
The frictional force = mg × coefficient of friction
= 14.7 × 0.35 = 5.14 N
then net force = 14.7 - 5.14 = 9.5 N
Acceleration of the brick = net force/mass
a = 9.5 N/1.50 Kg = 6.30 m/s²
Hence, acceleration on the brick is 6.30 m/s².
Find more on friction:
https://brainly.com/question/13000653
#SPJ1
A dog drags a 1-kg bone across the floor for 2 meters with an applied
force of 10N. How long did it take him if he used 40 Watts of power?
seconds
Answer:
0.5 seconds
Explanation:
Work = Fdcos(theta) = 10*2*cos(0) = 20 J
Power = W/t
40 = 20/t
t = 0.5s
Compare scalar and vector quantities using the definitions of distance and displacement
Answer:
Distance is a scalar quantity while displacement is a vector quantity
Explanation:
A scalar quantity represents only the magnitude and does not give any detail about the direction of the quantity for example distance. Distance can be any length measured in any direction (no specific direction)
However, a vector quality represents both the magnitude and direction. For instance displacement is a vector quantity. If direction is not defined then displacement becomes equal to distance.
A satellite of mass m is orbiting Earth in a stable circular orbit of radius R. The mass and radius of Earth are ME and RE , respectively. Express your answers to parts (a), (b), and (c) the following in terms of m, R, ME , RE , and physical constants, as appropriate.
a. Derive an expression for the speed of the satellite in its orbit.
b. Derive an expression for the total mechanical energy of the satellite-Earth system in its orbit.
c. Derive an expression for the period of the satellite’s orbit.
Answer:
a) v = [tex]\sqrt{G \frac{M_e}{(R+R_e)} }[/tex], b) Em = - ½ m [tex]G \frac{M_e}{(R+R_e)}[/tex], c) T = 2π [tex]\sqrt{\frac{ (R+R_e)^3 }{G M_e } }[/tex]
Explanation:
a) For this exercise we must use Newton's second law with the gravitational force
F = ma
[tex]G \frac{m M_e}{(R+R_e)^2 }[/tex] = m a
the acceleration of the satellite is centripetal
a = [tex]\frac{v^2}{(R+R_e)}[/tex]
we substitute
[tex]G \frac{m M_e}{(R+R_e)^2 } = m \frac{v^2}{ (R+R_e)}[/tex]
[tex]G \frac{M_e}{(R+R_e)}[/tex] = v²
v = [tex]\sqrt{G \frac{M_e}{(R+R_e)} }[/tex]
the distance is from the center of the earth
b) mechanical energy is the sum of kinetic energy plus potential energy
Em = K + U
Em = ½ m v² - G m M / (R + R_e)
we substitute the expression for the velocity
Em = ½ m [tex]G \frac{M_e}{(R+R_e)}[/tex] - [tex]G \frac{M_e}{(R+R_e)}[/tex]
Em = - ½ m [tex]G \frac{M_e}{(R+R_e)}[/tex]
c) as the orbit is circulating, the velocity modulus is constant
v = d / t
in a complete orbit the distance traveled of the circle is
d = 2π (R + R_e)
where time is called period
v = 2π (R + R_e)
T = 2π (R + R_e) / v
we substitute the speed value
T = 2π (R + R_e) [tex]\sqrt{\frac{(R+R_e) }{G M_e } }[/tex]
T = 2π [tex]\sqrt{\frac{ (R+R_e)^3 }{G M_e } }[/tex]
(a) An expression for the speed of the satellite in its orbit.
[tex]V=\sqrt{G\dfrac{M_e}{R+R_e}[/tex]
(b) An expression for the total mechanical energy of the satellite-Earth system in its orbit.
[tex]E_m =\dfrac{1}{2}mG\dfrac{M_e}{(R+R_e)}[/tex]
(c) An expression for the period of the satellite’s orbit.
[tex]T=2\pi\sqrt\dfrac{(R+R_e)^3}{GM_e}[/tex]
What are satellites?A satellite is a moon, planet or machine that orbits a planet or star. For example, Earth is a satellite because it orbits the sun
a) For this exercise we must use Newton's second law with the gravitational force
F = ma
[tex]ma =G\sqrt{\dfrac{mM_e}{(R+R_e)}[/tex]
the acceleration of the satellite is centripetal
[tex]a=\dfrac{v^2}{R+R_e}[/tex]
we substitute
[tex]G\dfrac{mM_e}{(R+R_e)}=m\dfrac{v^2}{(R+R_e)}[/tex]
[tex]G\dfrac{M_e}{(R+R_e)}=v^2[/tex]
[tex]v=\sqrt{G\dfrac{M_e}{(R+R_e)}[/tex]
b) mechanical energy is the sum of kinetic energy plus potential energy
Em = K + U
[tex]Em =\dfrac{1}{2}m v^2 - \dfrac{G m M} {(R + R_e)}[/tex]
we substitute the expression for the velocity
[tex]E_m=\dfrac{1}{2}mG\dfrac{M_e}{(R+R_e)}-G\dfrac{M_e}{(R+R_e)}[/tex]
[tex]E_m=-\dfrac{1}{2}G\dfrac{M_e}{(R+R_e)}[/tex]
c) as the orbit is circulating, the velocity modulus is constant
[tex]v=\dfrac{d}{t}[/tex]
in a complete orbit the distance traveled of the circle is
[tex]d = 2\pi (R + R_e)[/tex]
where time is called period
[tex]v = 2\pi (R + R_e)[/tex]
[tex]T = \dfrac{2\pi (R + R_e)} { v}[/tex]
we substitute the speed value
[tex]T = 2\pi (R + R_e) . \sqrt{\dfrac{(R+R_e)}{GM_e}[/tex]
[tex]T=2\pi\sqrt{\dfrac{(R+R_e)}{GM_e}[/tex]
(a) An expression for the speed of the satellite in its orbit.
[tex]V=\sqrt{G\dfrac{M_e}{R+R_e}[/tex]
(b) An expression for the total mechanical energy of the satellite-Earth system in its orbit.
[tex]E_m =\dfrac{1}{2}mG\dfrac{M_e}{(R+R_e)}[/tex]
(c) An expression for the period of the satellite’s orbit.
[tex]T=2\pi\sqrt\dfrac{(R+R_e)^3}{GM_e}[/tex]
To know more about satellites follow
https://brainly.com/question/18496962
You apply a net force on a soccer ball of 15 N. If the acceleration it has is 5 m/s2 what is the mass of the ball?
Answer:
3 kgExplanation:
The mass of the ball can be found by using the formula
[tex]m = \frac{f}{a} \\ [/tex]
f is the force
a is the acceleration
We have
[tex]m = \frac{15}{5} = 3 \\ [/tex]
We have the final answer as
3 kgHope this helps you
An astronomy class is so excited by the discovery of planets around other stars that they decide to do a library exhibit on the subject so that everyone in the school can learn about it. In this exhibit they want to pay tribute to both the astronomers of today who have done the work AND some of the scientists of the past whose work was essential to making the discoveries possible (and directly related to the techniques involved). Which of the following scientists of the past should definitely be included in the exhibit?
a. George Herbigâ
b. Ejnar Hertzsprungâ
c. Ptolemyâ
d. Gerard Kuiperâ
e. Christian Dopplerâ
Answer: e. Christian Dopplerâ
Explanation:
Based on the information given, the scientist of the past that should definitely be included in the exhibit is Christian Dopplera.
He described how the frequency of sound waves and light is being affected by the relative speed of both the source and also the observer. This was referred to as the Doppler effect.
In this scenario, the Doppler effect can be used to show how the universe is expanding. Therefore, the correct option is E.
QUESTION 4
A student lifts a 400 N sandbag 2 meters off the ground. How much work, in joules, did the student perform?
Answer:
800J
Explanation:
W = Fs, Work equals force times displacement
in this case, the force is 400N and the displacement is 2 meters.
The regular SI unit for work is joules
A 2kg block is attached to a spring for which K=200N/m it is held at an extension of 5 cm and then released at t=0.
A, the displacement as a function of time?
B, the acceleration when X=+A/2
C, the total energy when X=+A/2
D, the velocity when X=+A/2
The displacement, acceleration, energy and velocity of the simple harmonic motion of the mass attached to the spring are as follows;
A) x(t) = 0.05·sin(10·t + π/2)
B) The acceleration is; a(t) = -2.5 m/s²
C) The total energy is 0.0625 J
D) The velocity is ±√3/4 m/s
What is a simple harmonic motion?The restoring force of a body in simple harmonic motion is directly proportional to the displacement of the body from its mean or central position.
Mass of the block, m = 2 kg
The spring constant, k = 200 N/m
The extension of the spring = 5 cm
Time at which the spring is released, t = 0
A. The motion of the spring with the mass is a Simple Harmonic Motion
The angular velocity can be obtained using the formula;
ω = √(k/m)
Therefore;
ω = √(200/2) = 10
The angular velocity of the block on the spring is, ω = 10 rad/s
The period, T = The time to complete 2·π rad
Therefore; T = 2·π rad/(10 rad/s) = π/5 s
The amplitude, A, is the cistance of the mass from the at rest position, which is 5 cm = 0.05 m
The equation of the extension of the spring is therefore;
x(t) = 0.05·sin(10·t + c)
At t = 0, x(t) = 0.05, therefore;
sin(10 × 0 + c) = sin(c) = 1
c = π/2
The equation for the displacement as a function of time is therefore;
x(t) = 0.05·sin(10·t + π/2)B. The acceleration when x(t) = A/2 is obtained as follows;
x(t) = 0.05·sin(10·t + π/2)
A/2 = 0.05·sin(10·t + π/2)
A = 0.05
0.05/2 = 0.05·sin(10·t + π/2)
sin(10·t + π/2) = 1/2
10·t + π/2 = π/6
t = -π/30
cos(10×(-π/30) + π/2) = ±√3/2
v(t) = x'(t) = 0.05 × 10 × cos(10·t + π/2)
a(t) = v'(t) = -5·sin(10·t + π/2)
a(t) = v'(t) = -5·sin(10·t + π/2) = -5 × 1/2 = -2.5
The acceleration when X = + A/2 is -2.5 m/s²C. The energy in a pring = (1/2)·k·x²
When x = A/2, we get;
E = (1/2) × 200 × (0.05/2)² = 0.0625
The energy in the spring when x = A/2 is 0.0625 JD) The velocity when x = A/2 is; v(t) = x'(t) = 0.05 × 10 × cos(10·t + π/2)
v(t) = 0.5 × cos(10·t + π/2)
When x = A/2, sin(10·t + π/2) = 1/2, therefore;
cos(10·t + π/2) = ±√3/2
v(t) = 0.5 × ±√3/2 = ±√3/4
When x = A/2, the velocity, v(t) = ±√3/4 m/sLearn more about simple harmonic motion here: https://brainly.com/question/25865056
#SPJ1
A hair dryer uses 1200 watts of power. Current flow through
the dryer is 10 amperes. At what potential difference does the hair dryer operate
Answer:
did any of this help
Explanation:
y = (-2/3)x - 1
y-(-5)= -2/3(x-6)
y-y1=m(x-x1)
2x-3y=11
8. A 2kg object explodes and divides into three pieces, one piece has a mass of 800g and has a velocity of [30] m/s, a second piece has a mass of 500g and has a velocity of [520] m/s. What is the velocity of the third mass?
Answer:
v3 = 0 gm/s / 700g
Explanation:
To solve this problem, you need to use the principle of conservation of momentum, which states that the total momentum of a system remains constant unless acted upon by an external force. In this case, the total momentum of the system (the 2kg object before it explodes) is equal to the sum of the momenta of the three pieces after the explosion.
You can calculate the momentum of each piece by multiplying its mass by its velocity:
P1 = 800g * 30 m/s = 24,000 gm/s
P2 = 500g * 520 m/s = 260,000 gm/s
The total momentum of the system is the sum of these two momenta:
Ptotal = P1 + P2 = 24,000 gm/s + 260,000 gm/s = 284,000 g*m/s
The third piece has a mass of 2kg - 800g - 500g = 700g. We can use the conservation of momentum equation to find its velocity:
Ptotal = (700g * v3) + (800g * 30 m/s) + (500g * 520 m/s)
v3 = (Ptotal - (800g * 30 m/s) - (500g * 520 m/s)) / 700g
v3 = (284,000 gm/s - (800g * 30 m/s) - (500g * 520 m/s)) / 700g
v3 = (284,000 gm/s - 24,000 gm/s - 260,000 gm/s) / 700g
v3 = (284,000 - 24,000 - 260,000) gm/s / 700g
v3 = 0 gm/s / 700g
The velocity of the third mass is 0 m/s.
Hope this helps.