Answer:
HeyA ❤
Let us consider the mass of oxygen as 1 g.
Mass of lead obtained from yellow oxide = 3.45 g – 0.24 g = 3.21 g
Mass of oxygen = 0.24 g
The mass of lead that combines with 0.24 g of oxygen = 3.21 g
Therefore, mass of lead that combines with 1 g of oxygen = 3.21/ 0.24 = 13.4 g
Mass of lead obtained from brown oxide = 1.227 g – 0.16 g = 1.067
Mass of oxygen = 0.16g
The mass of lead that combines with 0.16 g of oxygen = 1.067 g
Therefore, mass of lead that combines with 1 g of oxygen = 1.067/ 0.16 = 6.66 g
Now, ratio of masses of lead which combines with a fixed mass of oxygen = 13.4 : 6.66
= 2 :1
Thus, masses of lead which combine with the fixed mass of oxygen are in the ratio of (2:1) i.e. small whole numbers.
Hence, the law of multiple proportions is illustrated.
Follow meehhhh Piper ❤
A climber is attached to a vertical rope that has a tension of 785 N. If the
climber has a mass of 85 kg, what is the net force on the climber?
O A. 48 N up
OB. 542 N up
O C. 700 N down
O D. 48 N down
SUBMIT
Answer:
D. 48 N down
Explanation:
Given that:
Mass of climber = 85 kg, Tension on rope = 785 N, acceleration due to gravity = 9.8 m/s²
To calculate the net force on the climber, we need to first calculate the weight of the climber. Since the climber is affected by the earth gravity, the weight of the climber is the product of his mass and the acceleration due to gravity, therefore:
Weight = mass × acceleration due to gravity = 85 kg × 9.8 m/s² = 833 N
The weight of the climber is acting downwards while tension on the rope is acting upwards, therefore:
Net force on the climber = 785 N - 833 N = - 48 N
This means that the net force on the climber is 48 N downwards
Answer:
48 N down
Explanation:
Ayepecks
what’s the reaction type of aqueous magnesium sulfate + aqueous sodium carbonate?
Answer: Double displacement reaction
Explanation:
Double displacement reaction is defined as the reaction where exchange of ions takes place.
The salts which are soluble in water are designated by symbol (aq) and those which are insoluble in water and remain in solid form are represented by (s) after their chemical formulas.
The chemical reaction between aqueous magnesium sulfate and aqueous sodium carbonate is represented as:
[tex]MgSO_4(aq)+Na_2CO_3(aq)\rightarrow Na_2SO_4(aq)+MgCO_3(s)[/tex]
Indicators change color when an acid and a base are mixed together. The change in color most likely indicates that a chemical change has occured. a physical change has occured. a new acid has been produced. a new base has been produced.
Answer:
a chemical change
Explanation:
a physical change is mostly identified even without indicators i.e candle wax about forming a new acid or base I guess we have to include a ph scale to ascertain since the salt can be acidic but not necessarily an acid
Answer: The answer is A, a chemical change has occurred
Explanation:
I’m just a jenious
What substance does a neutral substance release?
Answer:
Neutral substance is a substance that show no acid or base properties.
Explanation:
Neutral substance is a substances that show no acid or base properties, has an equal number of hydrogen and hydroxyl ions and does not change the color of litmus paper.
Answer:
They release no substance
Explanation:
Since the substance is neutral, nothing will be released from it.
The _____ of an element is the total number of protons and neutrons in the ___ of the atom
Answer:
Mass number
Nucleus
Explanation:
The combined number of protons and neutrons is the mass number in atomic notation.
The atomic number is just the number of protons alone.
The nucleus holds both neutrons and protons.
Electrons circle around the nucleus.
Answer: atomic mass I did it
Explanation:
Briefly explain how magnetic behavior is related to the arrangement of valence electrons in the outer orbitals
Answer:
Elements with unpaired valence electrons in the outer orbital are paramagnetic. Elements that are predicted to exhibit paramagnetic behavior may exhibit ferromagnetic behavior. Elements that contain only paired valence electrons are diamagnetic.
Balancing Chemical Reactions Worksheet A glow stick is a popular toy and safety device. To use a glow stick, you bend a small flexible plastic tube to break a small glass capsule inside, at which point the stick begins to glow. How do you think this works
Answer:
Concept of chemi-fluorescence
Explanation:
A glow stick usually consists of two chemicals in a larger plastic tube: , a base catalyst (mostly sodium salicylate), and a suitable dye (sensitizer, or fluorophor). This creates an exergonic reaction when mixed together.
When a glow stick is bent, the flurophor which is a chemical that easily re-emits light upon excitation in smaller capsules is released into the other substance, there by causing it to emit radiation/light in the uv-visible region. The brightness and longevity of the glow stick is determined by varying the concentration of these chemicals.
I hope this explanation clarifies things.
The freezing point of pure chloroform is -63.5°C, and its freezing point depression constant is 4.07°C•kg/mol. If the freezing point of a solution of benzoic acid in chloroform is -70.55°C, what is the molality of this solution? 0.58 m 1.7 m 16 m 17 m
Answer: The molality of this solution is 1.7 m
Explanation:
Depression in freezing point:
[tex]T_f^0-T^f=i\times k_f\times m[/tex]
where,
[tex]T_f[/tex] = freezing point of solution = [tex]-70.55^0C[/tex]
[tex]T_f^0[/tex] = freezing point of pure chloroform = [tex]-63.5^0C[/tex]
[tex]k_f[/tex] = freezing point constant of benzene = [tex]4.07^0Ckg/mol[/tex]
m = molality
i = Van't Hoff factor = 1 (for non-electrolyte)
[tex]-63.5-(-70.55)^0C=1\times 4.07^0Ckg/mol\times m[/tex]
[tex]7.05=1\times 4.07^0Ckg/mol\times m[/tex]
[tex]m=1.7[/tex]
Thus the molality of this solution is 1.7 m
Smaller particles in an atom are called ____________.
Answer:
[tex]\large \boxed{\sf subatomic \ particles}[/tex]
Explanation:
The smaller particles in an atom are called subatomic particles. Subatomic particles include electrons, protons, and neutrons.
How science classified?
any additional answer please thanks
Answer:
Scientific Classification. Classification, or taxonomy, is a system of categorizing living things. There are seven divisions in the system: (1) Kingdom; (2) Phylum or Division; (3) Class; (4) Order; (5) Family; (6) Genus; (7) Species. ... Species are identified by two names (binomial nomenclature)
Explanation:
Answer the following questions:
1. Define a compound. State three points of evidence to show that sodium chloride is a compound.
2. When Iron powder and Sulphur powder were mixed together and heated strongly, a substance A was formed. When did. Hydrochloric acid was added to substance A, the gas B was evolved.
a) What is A and what type of substance is it?
b) Name the gas B. State one characteristic property of gas B.
c)Is the reaction of Iron and Sulphur powder a chemical change or a physical change.
Answer the question according to the class 9th student.
Answer:
1. A compound is a group of elements that cannot be separated by physical methods.
NaCl is a compound becuse it cannot be separated by physical methods.
It consists of postive and negative ions.
It can be separated only by chemical reactions.
2. (a) A is a mixture of iron and sulphur and it is in liq form.
(b) Gas B is hydrogen gas and it has sharp pungent irritating smell.
(c) It is a physical change.
Explanation:
4. How much force, in g cm / s2 , is exerted by a golf ball described in problem 2 striking a tree while accelerating at 20 cm / s2 ? Show how you can solve this problem without knowing that F = m a. Explain your solution.
Answer:
Explanation:ifk
25g ice crystals are taken in a beaker and inserted a thermo meter into it and slowly heated. Answer the following questions based on the above experiment.
a) At what temperature ice starts melting?
b) At 50 0 C is reached, what is the physical state of ice?
c) At 100 0 C is reached the boiling point of substance is not rising for some time. What is the reason for it?
d) What is the boiling point of the substance?
e) What is physical state of the substance above 100 degree C?
Answer:
a) 0°C
b) liquid
c) The energy supplied at 100°C is utilized in breaking the intermolecular forces in the liquid.
d) 100°C
e) gas
Explanation:
There are three States of matter; solid, liquid and gas. If we start heating 25g of ice in a beaker with a thermometer inserted into it, the ice will change from solid to liquid and finally to gas as the temperature increases.
At 0°C, the solid ice begins to melt and remains liquid between 0°C-100°C. This is called the liquid range of water. At 100°C, the heat supplied does not lead to further rise in temperature. The energy supplied is rather utilized in breaking the intermolecular forces in the liquid. This is known as the latent heat of vaporization. Above 100°C, the liquid is changed to vapour. Water vapour is commonly called steam.
Which of the mechanical waves below has the greatest energy?
Answer:
Blue wave.
Explanation:
The energy of a wave depends on its amplitude. A wave having more amplitude will have greatest energy while a wave having small amplitude will have least energy. The given figure shows four waves that are shown with green, orange, blue and red color. It is very clear from the figure that the amplitude of blue wave is greatest of all the wave.Hence, blue wave will have greatest energy.Which products are the same in both the copper carbonate and the calcium carbonate if they react with hydrochloric acid in different reactions (shown above
Explanation:
the carbonate and the hydrochloric acid are the same in both reactions as products
Which of the following phrases describes valence electrons?
O A. Electrons that are part of the core of the atom
O B. Electrons that are closest to the nucleus
O C. Electrons that are farthest from the nucleus
D. Electrons identified by the period number of the element
Answer:
C
Explanation:
because valence electrons are located at the last energy level
Element Grouping Quick Check:
1. Which element has two valence electrons?
D. calcium
2.Based on its position in the periodic table, which element would have seven valence electrons?
A. Chlorine
3. Which phrase describes a valence electron?
C. An electron in the outer energy level of an atom
4. Which phrase best describes a period on the periodic table?
A. A row of elements
5. Which two elements have the same number of energy levels with electrons in them?
A. Boron and Oxygen
Hope this helps!
Calculate the pOH and pH of a solution which contains 0.001 M NaOH. Assume 100% ionization. (Need an in-depth explanation with formulas please)
Answer:
pH: 11
pOH: 3
Explanation:
NaOH is a strong base which means that it dissociates completely in water. It will break apart into Na⁺ and OH⁻ ions.
NaOH ⇒ Na⁺ + OH⁻
Because NaOH dissociates completely into its respective ions in water, the moles of NaOH is equal to the moles of hydroxide ions. So, [OH⁻] = 0.001 M.
Now to find the pOH, use the formula pOH = -log[OH⁻].
pOH = -log[OH⁻]
= -log(0.001)
= 3
The pOH of the solution is 3.
To find the pH, subtract the pOH from 14 since pH + pOH = 14.
14 - 3 = 11
The pH of the solution is 11.
Hope that helps.
What is the correct way to represent the ionic compound sodium fluoride?
Answer: I don't know how to add a picture, so I might not explain this well.
Explanation: You put Na in the first box. Then you put F in the center of the second box because it gained one electron from Na. Then in the third box you put Na [+] because it lost one electron so it's now an cation(has a positive charge) because it lost a valence electron. In the last box you would put F [-] because it gained one electron so it's now an anion( has a negative charge) because it gained a valence electron. F now has 8 valence electrons and Na has 8 as well therefore they're both balanced.
The final method of sodium fluoride is NaF. An ionic compound is formed with the aid of the complete transfer of electrons from a steel to a nonmetal and the ensuing ions have achieved an octet.
what is the ionic compound for sodium fluoride?The chemical formula of sodium fluoride is NaF and its molar mass is 41.99 g/mol. it's miles an easy ionic compound, made from the sodium (Na+) cation and fluoride (F-) anion. The strong salt exists as cubic crystals just like the crystal structure of sodium chloride (NaCl).
what is sodium fluoride?Sodium fluoride is synthetic via the response of hydrofluoric acid with sodium carbonate or sodium hydroxide with the formula NaF. The most inexpensive chemical to be had for fluoridation is sodium fluorosilicate, formerly referred to as sodium silicofluoride.
Learn more about sodium fluoride here: https://brainly.com/question/15684463
#SPJ2
Select the correct answer.
What is the reason for heat transfer from one substance to another
Answer:
Difference in temperature.
Explanation:
Conduction is the movement of heat energy through a substance or from one substance to another by direct contact of atoms and molecules. Heat moves directly from one molecule to another. The heat energy speeds up the movement of the atoms and they collide with other molecules setting them into faster motion.
A 36.0−g sample of an unknown metal at 99°C was placed in a constant-pressure calorimeter containing 70.0 g of water at 24.0°C. The final temperature of the system was found to be 28.4°C. Calculate the specific heat of the metal. (The heat capacity of the calorimeter is 12.4 J/°C.)
Answer: 0.52849 j /g °C
Explanation:
Given the following :
Mass of metal = 36g
Δ Temperature of metal = (28.4 - 99)°C = - 70.6°C
Mass of water = 70g
Δ in temperature of water = (28.4 - 24.0) = 4.4°C
Heat lost by metal = (heat gained by water + heat gained by calorimeter)
Quantity of heat(q) = mcΔT
Where; m = mass of object ; c = specific heat capacity of object
Heat lost by metal:
- (36 × c × - 70.6) = 2541.6c - - - - (1)
Heta gained by water and calorimeter :
(70 × 4.184 × 4.4) + (12.4 × 4.4) = 1288.672 + 54.56 = 1343.232 - - - - (2)
Equating (1) and (2)
2541.6c = 1343.232
c = 1343.232 / 2541.6
c = 0.52849 j /g °C
Si el elemento "X" tiene 8 protones y el elemento "Y" tiene 11 protones, al reaccionar ¿Qué tipo de enlace pueden formar? Seleccione una: a. Metálico. b. Covalente puro. c. Covalente polar. d. Iónico.
Answer:
D; Iónico
Explanation:
El elemento con 8 protones es oxígeno, mientras que el elemento con 11 protones es sodio.
El sodio es un metal alcalinotérreo, mientras que el oxígeno no es un metal.
En general, cuando tenemos un elemento metálico como el sodio, que se une con uno no metálico como el oxígeno, el tipo de enlace formado como resultado de la transferencia completa de electrones desde la capa de valencia del sodio a la capa de valencia del oxígeno para completar su propia configuración de octeto se denomina enlace electrovalente o, más generalmente, enlace iónico
What are indicators? How methyl orange and phenolphthalein changes their colour in acidic and basic solutions? How litmus paper changes its colour in different solutions?
Answer:
See the answer below
Explanation:
In chemistry, indicators are substances that are capable of changing colors with respect to the pH. Each indicator has its characteristic color in acidic pH and another characteristic color in alkaline pH.
Methyl orange indicator appears red in acidic solution and yellow in basic solutions. Phenolphthalein is usually colorless in acidic solutions and appears pink in basic solutions. A red litmus paper will turn blue in alkaline solutions while a blue litmus paper will turn red in acidic solutions.
How much heat is needed to raise the temperature of water with mass of 27.0 g at 20.0°C to 45.0°C?
Answer:
2835 J
Explanation:
Take the specific heat capacity of water as 4.2 J/ g°C.
Energy (heat) = mass x specific heat capacity x change in temperature
(E= mcΔT)
E = 27 x 4.2 x (45-20)
E = 2835 J
How does increasing temperature increase the number of reactions
Answer:
A
Explanation:
the increase in the temperature let's the particles to collide more so it increases the rate of reaction.
Answer:
I think the answer is option A.
Explanation:
Because when the temperature increases, the kinetic enegry increases which creates the effective collisions which lets the chemical to react.
Hope it helps..
An ionic bond is the attraction between _____.
Answer:
oppositely charged ions in a chemical compound
Explanation:
Answer:
Between ions
Explanation:
A substance contains 23.0 g sodium, 27.0 g aluminum, and 114 g fluorine. How many grams of sodium are there in a 102-g sample of the substance? Select one: a. 4.43 g b. 23.0 g c. 14.3 g d. 102 g e. None of these
Answer:
E. None of the above
Explanation:
Marking BRAINLIEST!! - Chlorine reacts with methane to form gaseous hydrogen chloride and chloromethane according to the following equation: Cl2 (g) + CH4 (g) → HCl (g) + CH3Cl (g) If 100 mL of chlorine reacted with excess methane at constant pressure and temperature, what volume of chloromethane would be formed?
Answer:
the answer for the question is 40 mL
A scuba diver’s air tank contains oxygen, helium, and nitrogen at a total pressure of 205 atmospheres. The partial pressure of nitrogen is 143 atmospheres, and the partial pressure of helium is 41 atmospheres. What is the partial pressure of oxygen in the tank?
answer is 20
explanation: total Pressure = 205
partial pressure of N = 143
partial pressure of He = 41
total pressure = partial pressure of N + partial pressure of O + partial pressure of He
partial pressure of O = 205 - 185 = 20
Answer:
20
Explanation:
according to Bohr atomic model
Answer:
A small positively charged nucleus surrounded by revolving negatively charged electrons in fixed orbits
WHAT IS THE UNBALCNED EQUATION OF Methane burns in oxygen to produce carbon dioxide and water
Answer:
[tex]\boxed{CH_{4}+O_2 --> CO_2 + H_2O}[/tex]
Explanation:
Part 1: Naming compound formulas given the namesStep 1. Methane's formula is [tex]CH_4[/tex].
Step 2: Oxygen is a diatomic molecule (it exists bonded to itself for stability purposes), so by itself in chemical equations, it is written as [tex]O_2[/tex].
Step 3: Carbon dioxide is the molecular compound of one atom of carbon and two atoms of oxygen → [tex]CO_2[/tex].
Step 4: Water is the common name of the compound of two hydrogen atoms and one oxygen atom → [tex]H_2O[/tex].
Part 2: Writing the skeleton equationStep 1: Use the determined formulas for the reactants and plug them into the equation. We are told that methane burns in oxygen -- hinting at a combustion reaction. Therefore, we may infer that these are the reactants that yield the products.
Skeleton equations are written with the reactant(s) on the left -- if there are several, they are separated by an addition symbol (+).
With this information, we may begin our equation: [tex]CH_4 + O_2[/tex], where [tex]CH_4[/tex] is methane and [tex]O_2[/tex] is the diatomic molecule of oxygen.
Step 2: Use the determined formulas for the products and plug them into the equation. We are told that the methane burns in oxygen to produce carbon dioxide and water. Hence, we can separate these two as we did with the reactants.
Now, our products side of the reaction will look like this: [tex]--> CO_2 + H_2O[/tex], where [tex]CO_2[/tex] is carbon dioxide and [tex]H_2O[/tex] is water.
Step 3: Write the final equation. All you must do after determining both sides of the equation is simply push them together. Place the reactant side of the equation on the left and the product side of the equation on the right.
This gives us our final equation, [tex]\boxed{CH_4 + O_2 --> CO_2 + H_2O}[/tex].
Because the problem asks for the unbalanced equation, we do not need to take any further steps of balancing the equation.