Two identical rectangular strips of copper and the steel are pivoted to form bimetallic strips. If the
coefficient of linear expansivity of copper is more than that of steal, what will happen on
heating?

False. Not all online typing programs are free.

Online typing programs are software applications or websites that provide typing lessons, exercises, and tests to help individuals improve their typing skills.

These programs typically include a variety of lessons and exercises designed to help users learn proper typing techniques, improve their typing speed, and increase their accuracy.

There are online typing programs that are available for free. While some online typing programs do require a fee to access all features or to remove ads, there are also many free typing programs available that provide basic typing lessons and exercises.

More on online typing can be found here: https://brainly.com/question/16266184

#SPJ1

Answer:

HOPE IT HELPS..........

Answer:

Diffraction Grating: Definition and Applications

A diffraction grating is a device that is used to separate light into its component wavelengths. It consists of a flat surface that has a large number of parallel grooves or lines etched into it. When light is shone onto the grating, it is diffracted into its individual wavelengths, producing a spectrum of colors. Diffraction gratings are commonly used in various applications, such as spectroscopy, astronomy, and telecommunications.

The science behind diffraction gratings is based on the principles of wave interference and diffraction. When light passes through a narrow slit or a small opening, it diffracts, or spreads out, into a series of bright and dark fringes. When a beam of light passes through a grating, the light is diffracted by each of the parallel lines on the surface of the grating, resulting in a series of bright and dark fringes that are spaced apart at regular intervals. The spacing between the lines on the grating determines the amount of diffraction, and therefore the angle at which the diffracted light is scattered.

Diffraction gratings are commonly used in spectroscopy, which is the study of the interaction between light and matter. Spectroscopy is used in various applications, such as identifying the chemical composition of materials, analyzing the spectra of stars and galaxies, and studying the properties of molecules and atoms.

In astronomy, diffraction gratings are used in telescopes and spectrometers to study the spectra of stars and galaxies. By analyzing the spectra, astronomers can determine the chemical composition, temperature, and other properties of celestial objects.

In telecommunications, diffraction gratings are used in fiber-optic communication systems to separate different wavelengths of light. This allows for the transmission of multiple signals over a single optical fiber, increasing the capacity and speed of the communication system.

In conclusion, a diffraction grating is a device that is used to separate light into its component wavelengths. It consists of a flat surface with parallel lines etched into it, which diffract the light and produce a spectrum of colors. Diffraction gratings are commonly used in spectroscopy, astronomy, and telecommunications, and they play an important role in our understanding of the interaction between light and matter.

Explanation:

Answer:

diffraction grating is an optical component with a periodic structure that diffracts light into several beams travelling in different directions.

Explanation:

the linear diameter of the object is approximately 77.28 meters for an object that has an angular diameter of 10 arcs ends and a distance of 50,000 meters

The angular diameter of an object is the angle it subtends at the observer's eye, while the linear diameter is the physical size of the object. We can use trigonometry to relate the angular diameter, the distance to the object, and the linear diameter.

If an object has an angular diameter of 10 arc seconds (10"), it subtends an angle of:

θ = 10" / 3600 = 0.0027778 radians

The linear diameter, D, is related to the distance, d, and the angle, θ, by the formula:

tan(θ/2) = D/2d

Rearranging this formula gives:

D = 2d * tan(θ/2)

Substituting the given values, we get:

D = 2 * 50,000 m * tan(0.0027778/2)

D = 2 * 50,000 m * tan(0.0013889)

D = 2 * 50,000 m * 0.0007728

D = 77.28 m

Learn more about  linear diameter  here:

https://brainly.com/question/13572468

#SPJ1

Answer:

b

Explanation:

Long answers are always the correct answer. FAXS

The amplitude of the graph is 4. Option D.

Amplitude refers to the maximum displacement or distance from the rest position of a vibrating object or wave. In other words, it measures the strength or intensity of the vibration or wave.

For sound waves, it determines the loudness of the sound, while for light waves, it affects the brightness of the light.

In the graph, the maximum amount of displacement of the wave is 4.

More on amplitude can be found here: https://brainly.com/question/8662436

#SPJ1

The wheel completes approximately 1.91 revolutions during its 2 seconds of acceleration.

The car's uniform acceleration, a = v/t, is provided. The distance it moves in the given amount of time, t, can be calculated using the kinematic equations for linear motion. By multiplying this distance by the tyre's diameter, we can calculate the number of revolutions. The formula f = vf/rtire yields the ultimate angular speed.

To resolve this issue, we can use the kinetic equation shown below:

θ = 1/2 α t²

To begin with, we can use the following method to determine the wheel's ultimate angular velocity:

ωf = ωi + αt

where i represents the starting angular speed. (which is zero in this case).

ωf = ωi + αt

ωf = 0 + 6 rad/s² × 2 s

ωf = 12 rad/s

Next, we can calculate the number of rotations made during the two seconds of acceleration using the formula for the angle the wheel made:

θ = 1/2 α t²

θ = 1/2 × 6 rad/s^2 × (2 s)²

θ = 12 rad

We can divide this by 2 (the number of radians in a rotation) to get the number of revolutions:

of revolutions = θ / 2π

of revolutions = 12 rad / 2π

of revolutions ≈ 1.91 revolutions.

To know more about acceleration visit:-

https://brainly.com/question/12550364

#SPJ1

The velocity of the ball 3 seconds after reaching the peak height is 30 m/s.

What is Velocity?

Velocity is a vector quantity that describes the speed and direction of motion of an object. It is defined as the rate of change of displacement of an object over time. In other words, velocity tells us how fast an object is moving and in what direction.

Assuming that air resistance is negligible, we can use the kinematic equations of motion to solve for the velocity of the ball 3 seconds after reaching the peak height.

Let's use the following variables:

a = acceleration = 10 m/[tex]s^{2}[/tex] (since the ball is continuing to accelerate downwards)

t = time = 3 seconds (since we want to find the velocity 3 seconds after reaching the peak)

v₀ = initial velocity = 0 m/s (since the ball has zero velocity at the peak)

v = final velocity (what we want to find)

Using the kinematic equation for velocity with constant acceleration:

v = v₀ + at

Substituting the given values:

v = 0 + 10 m/[tex]s^{2}[/tex] × 3 s

v = 30 m/s

Learn more about Velocity from the given link

https://brainly.com/question/24445340

#SPJ1

The practices don't assist people survive earthquakes or safeguard property safety precautions to take when an earthquake occurs.

The ability of something like a building to bend, wobble, and deform again without collapsing is referred to as ductility, and it is frequently incorporated into earthquake-resistant designs. When subjected to the either vertical or horizontal shear stresses of an earthquake, a ductile structure can bend and flex.

Based just on seismic dangers in the area, buildings are made to endure a particular amount of shaking. For instance, a structure in Los Angeles would be constructed to withstand a stronger earthquakes than one in Nyc. But, seismologists do not often know the precise size.

To know more about resistant visit :

https://brainly.com/question/30799966

#SPJ9

Answer:

We can use the electric field equation to find the electric field at the origin due to each point charge, and then add them vectorially to find the total electric field. The electric field due to a point charge is given by:

Explanation:

E = k * q / r^2

where k is Coulomb's constant, q is the magnitude of the point charge, and r is the distance from the charge to the point where we want to find the electric field.

A) Both charges are positive. The electric field at the origin due to charge A is:

E_A = k * q_A / r_A^2

where q_A is the magnitude of charge A, r_A is the distance from A to the origin, and we have:

q_A > 0

r_A = 3.00 cm = 0.03 m

The electric field at the origin due to charge B is:

E_B = k * q_B / r_B^2

where q_B = 2 * q_A is the magnitude of charge B, r_B is the distance from B to the origin, and we have:

q_B > 0

r_B = 5.00 cm = 0.05 m

Using Coulomb's constant k = 9.00 x 10^9 N*m^2/C^2, we get:

E_A = (9.00 x 10^9 Nm^2/C^2) * q_A / r_A^2

E_A = (9.00 x 10^9 Nm^2/C^2) * q_A / (0.03 m)^2

E_A = 1.00 x 10^12 q_A N/C

E_B = (9.00 x 10^9 Nm^2/C^2) * q_B / r_B^2

E_B = (9.00 x 10^9 Nm^2/C^2) * 2q_A / (0.05 m)^2

E_B = 7.20 x 10^11 q_A N/C

The total electric field at the origin is the vector sum of E_A and E_B. Since the charges are on the x-axis and the origin is also on the x-axis, the total electric field will be along the x-axis. Therefore, we only need to add the magnitudes of E_A and E_B to get the total electric field:

E_total = |E_A| + |E_B|

E_total = 1.00 x 10^12 q_A N/C + 7.20 x 10^11 q_A N/C

E_total = 1.72 x 10^12 q_A N/C

Substituting q_A = 2800 N/C * (0.01 m)^2 / (9.00 x 10^9 N*m^2/C^2) = 3.11 x 10^-6 C, we get:

E_total = 5.39 N/C

Therefore, the magnitude of the total electric field at the origin is 5.39 N/C, and it is directed along the positive x-axis.

B) Both charges are negative. The only difference from part A is that the charges now have negative signs, so we have:

q_A < 0

q_B = -2 * |q_A| = -2q_A < 0

Substituting these signs into the equations for E_A and E_B, we get:

E_A = -1.00 x 10^12 |q_A| N/C

E_B = -7.20 x 10^11 |q_A| N/C

The total electric field at

not sure if this solves your answer but hope it somewhat helps.

As the charge is negative, the force, which has a magnitude of 33.05 N, is directed to the left, against the electric field.

E is a symbol for the magnitude of the electric field at a specific distance from a point charge. At twice the distance from the point charge, what is the electric field's strength? The field's strength is E/2 at twice the distance. The field's strength is still equal to E at a distance that is twice as great.

E = k*q/r²

r1 = 2.00 cm

r2 = 1.00 cm + 3.00 cm = 4.00 cm

r3 = 1.00 cm

Using these distances, we can calculate the electric field due to each charge:

E1 = kq1/r1² = (9.0 x 10⁹ Nm²/C²) * (1.50 x 10⁻⁶ C) / (0.02 m)² = 168.75 N/C (to the right)

E2 = kq2/r2² = (9.0 x 10⁹ Nm²/C²) * (-2.00 x 10^⁻⁶ C) / (0.04 m)² = -112.50 N/C (to the left)

E3 = kq3/r3² = (9.0 x 10⁹ Nm²/C²) * (6.00 x 10⁻⁶ C) / (0.01 m)² = 5.40 x 10⁶ N/C (to the right)

E = E1 + E2 + E3 = 168.75 N/C - 112.50 N/C + 5.40 x 10⁶ N/C = 5.39 x 10⁶ N/C (to the right)

F = q*E

F = (-6.13 x 10 C) * (5.39 x 10⁶ N/C) = -33.05 N

To know more about magnitude visit:-

https://brainly.com/question/29766788

#SPJ1

The tangential speed of a point on the sphere's rim is 2.31 m/s.

An area of 0.1 T magnetic field lies perpendicular to the plane of a cycle wheel with a radius of 0.5 m, rotating at a constant rate of 10 rad/s. Between its centre and rim, there is a 0.5 V. zero EMF created.

I = (2/5) * m * r²

where m is the mass of the sphere and r is the radius.

Substituting the given values, we get:

I = (2/5) * 28.0 kg * (0.380 m)² = 1.35 kg m²

K = (1/2) * I * ω²

Substituting the given value of K and the calculated value of I, we get:

236 J = (1/2) * 1.35 kg m² * ω²

Solving for ω, we get:

ω = √(2 * 236 J / (1.35 kg m²)) = 6.62 rad/s

v = r * ω

Substituting the given value of r and the calculated value of ω, we get:

v = 0.380 m * 6.62 rad/s = 2.31 m/s.

To know more about tangential speed visit:-

https://brainly.com/question/17446849

#SPJ1

At the start of a race, a cyclist's velocity is zero because they are not yet moving. However, as they begin to pedal and move forward, their velocity increases. The direction of the velocity depends on the direction in which they are moving.

Acceleration is the rate at which velocity changes over time. In the case of a cyclist at the start of a race, their acceleration would be positive, as they are increasing their velocity. The magnitude of the acceleration would depend on various factors such as the force of the cyclist's pedaling, the mass of the cyclist and the bike, and the friction between the tires and the ground.

As the cyclist continues to pedal, their velocity will increase, and their acceleration may either increase or decrease depending on the external factors that influence their motion. Ultimately, the cyclist's velocity and acceleration will determine their position and speed relative to other cyclists in the race.

The density of the pipe is 1.17 × [tex]10^{6}[/tex] kg/m³ (in SI units).

What is density?

To find the density of the pipe, we need to know its volume and mass. We can calculate the volume of the pipe using the formula for the volume of a cylinder:

Volume of cylinder = π * (radius)² * height

where the radius is half of the diameter.

The external radius of the pipe is 21 cm (0.21 m), and the internal radius is 14 cm (0.14 m). We don't know the height of the pipe, but we can assume that it is equal to the difference between the external and internal radii, since the pipe is assumed to have uniform thickness. Therefore, the height of the pipe is:

Height = (external radius) - (internal radius)

Height = 0.21 m - 0.14 m

Height = 0.07 m

Using these values, we can calculate the volume of the pipe:

Volume = π * ((0.21)² - (0.14)²) * 0.07

Volume = 0.00137 m³

Now we can find the density of the pipe by dividing its mass by its volume:

Density = Mass / Volume

Since the mass is given as 1600 kg, we have:

Density = 1600 kg / 0.00137 m³

Density = 1.17 × [tex]10^{6}[/tex] kg/m³

Therefore, the density of the pipe is 1.17 × [tex]10^{6}[/tex] kg/m³ (in SI units).

To know more about density, visit:

https://brainly.com/question/13145021

#SPJ1

Complete question is: a pipe of external and internal diameters of 42cm and 28cm respectively has a mass 1600kg. the density of the pipe is 1.17 × [tex]10^{6}[/tex] kg/m³ (in SI units).

Because the cable was not connected properly is the most likely cause of the experiment's failure.

The coils of wire that make up an electromagnet have electricity running through them. When an electric current flows through the wire coils of an electromagnet, the coils act like a magnet because moving charges produce magnetic fields.

There are numerous factors to examine. Make sure an ordinary magnet can attract safety pins as a start. Then, verify that current is actually flowing through your wire. To do this, you need a strong enough battery, a wire with a low enough resistance, and a complete circuit connecting the two.

To learn more about electromagnet visit:

brainly.com/question/3427992

#SPJ1

The wave given in the diagram is a third harmonic wave

A harmonic wave is a type of wave that is characterized by its frequency, which is a multiple of the fundamental frequency. In other words, a harmonic wave has a frequency that is an integer multiple of the fundamental frequency, such as twice, three times, four times, etc. the fundamental frequency.

A third harmonic wave specifically has a frequency that is three times the fundamental frequency. It is important to note that a third harmonic wave is just one type of harmonic wave, and there can be other harmonic waves with different frequencies that are also multiples of the fundamental frequency.

Third harmonic waves can be observed in various physical systems, including musical instruments, electrical circuits, and mechanical systems. In musical instruments, for example, a third harmonic wave can produce a higher-pitched sound than the fundamental frequency, while in electrical circuits, it can result in a distortion of the signal. In mechanical systems, a third harmonic wave can cause resonance, which can lead to damaging vibrations.

NB: This wave is known as a standing wave

Learn more on harmonic waves here;

https://brainly.com/question/4290297

#SPJ1

Answer:

Analyze the data collected and check to see if they support the hypothesis

Explanation: A. if they already have the raw data thaat means they have already conducted the experiment so it can not be the first option

B. once you collect the raw data you need to check if it corresponds to the data so it would have to be the 2 option.

Hopes this helps.

When a person goes down a skate ramp from a height of 10 m and reaches a maximum height of 8 m on the other side, there is a transfer of energy happening.

What is energy transfer?

Initially, the person has gravitational potential energy due to their position at a height of 10 m. As the person goes down the ramp, this gravitational potential energy is converted into kinetic energy, which is the energy of motion. This is because the person is accelerating as they move down the ramp due to the force of gravity.

As the person reaches the bottom of the ramp, all of their gravitational potential energy has been converted into kinetic energy. At this point, the person's kinetic energy is at its maximum. However, the person's kinetic energy starts to decrease as they move up the other side of the ramp. This is because the person is now moving against the force of gravity and must use their kinetic energy to overcome this force and move upward.

As the person moves up the other side of the ramp, their kinetic energy is gradually converted back into gravitational potential energy. At the maximum height of 8 m on the other side of the ramp, the person's kinetic energy has been fully converted back into gravitational potential energy, and they are once again at their maximum height.

Therefore, the energy of the person is constantly being converted between kinetic energy and gravitational potential energy as they go down the ramp and up the other side. This conversion of energy is due to the force of gravity acting on the person and the changes in their height as they move along the ramp. No energy is lost during this process; it is simply converted from one form to another.

To know more about kinetic energy, visit:

https://brainly.com/question/999862

#SPJ1

Complete question is: A person goes down a skate ramp from a height of 10 m and reaches a maximum height of 8 m on the other side, there is a transfer of energy happening.

Answer:

(a) To find the particle's acceleration, we can use the formula: a = (v2 - v1)/t where v1 is the initial velocity, v2 is the velocity at time t, and t is the time interval. Substituting the given values, we get: a = (14.0j - (15.8i + 18.4j))/5.1 s a = (-15.8i - 4.4j)/5.1 s a = (-3.1i - 0.9j) m/s^2 Therefore, the particle's acceleration is (-3.1i - 0.9j) m/s^2. (b) To find the position function, we can integrate the velocity function with respect to time: r(t) = ∫v(t) dt Integrating

According to this passage, the ultimate aim of existence is to completely experience and appreciate the state of being alive rather than merely to discover a particular purpose or significance.

"I don't think [the purpose of life] is what we're seeking," said Joseph Campbell. I believe it is an experience of life, allowing our experiences on the strictly physical plane to resonate with our innermost selves and realities, allowing us to truly feel the joy of existence.

The bravery to probe the depths, the idea of creative rebirth, and the never-ending cycle of transformation within ourselves are all fundamental themes of the hero's journey.

To know more about transformation visit:-

https://brainly.com/question/13115576

#SPJ1

first of all you need to transform the value of the charge to the SI system which means

-65.1μC = -65.1 × 10^-6 C

then you calculate the force using this formula

F = E / |q|

F = 23648 / 65.1 × 10^-6 N

I am very pleased to be here today to welcome all of you to the laboratory.

As a prefect, I am in charge of this laboratory and I would like to take this opportunity to tell you a bit about what a laboratory is and why it is important.A laboratory is a place where scientific experiments are conducted and new knowledge is gained. The laboratory provides a safe and controlled environment for students to explore, analyze, and test out new ideas and concepts. In addition to providing a space for experimentation, the laboratory also provides access to specialized equipment and materials that can be used for research purposes.In the laboratory, you will learn how to use the scientific method to answer questions and solve problems. You will also learn how to properly use the equipment and materials found in the laboratory.This is an important skill that will help you to become a successful scientist.

learn more  about laboratory Refer:brainly.com/question/18566158

#SPJ1

Answer:

A

Explanation:

It can be a circuit if it's not closed

Answer: The mass of the remaining ice in the jar is 1.3e+2 g.

Explanation: Let’s denote the mass of the remaining ice as m_ice. The heat gained by the ice is equal to the heat lost by the tea. The heat gained by the ice is given by m_ice * L_f, where L_f is the latent heat of fusion of water (334000 J/kg). The heat lost by the tea is given by m_tea * c_w * (T_initial - T_final), where m_tea is the mass of tea (0.187 kg), c_w is the specific heat capacity of water (4186 J/kg·°C), T_initial is the initial temperature of the tea (33.3°C), and T_final is the final temperature of the tea (31.8°C).

Equating the heat gained by the ice to the heat lost by the tea, we get:

m_ice * L_f = m_tea * c_w * (T_initial - T_final)

Substituting in the values, we get:

m_ice * 334000 = 0.187 * 4186 * (33.3 - 31.8)

Solving for m_ice, we get:

m_ice = 0.187 * 4186 * (33.3 - 31.8) / 334000

m_ice ≈ 0.130 kg

Converting to grams and rounding to two significant figures, we get:

m_ice ≈ 130 g

Hope this helps, and have a great day! =)

The sum tone has a frequency of (Cs+Gs) and the difference tones have frequencies of (Cs-Gs) and (Gs-Cs).

Combination tones are tones that are produced by the interaction of two or more pure tones in the ear or in a resonant system. They are produced by the sum and difference of the frequencies of the pure tones.

The Pythagorean diatonic scale is a tuning system in which the frequency ratios between adjacent notes are based on the ratios of small whole numbers. This scale was used in ancient Greek music and later became the basis for Western music theory.

The Pythagorean tuning system is related to music because it provides a mathematical foundation for the intervals and relationships between musical notes, and has influenced the development of Western music for centuries.

To know more about frequencies,visit:

https://brainly.com/question/25867078

#SPJ1

The rod is hung 8 cm from its endpoint instead of 28 cm, the maximum potential energy and thus the maximum angle of displacement will be smaller.

What is Potential Energy?

Potential energy is the energy possessed by an object due to its position or state. It is the energy that can be stored in an object as a result of its position or configuration. The amount of potential energy an object has depends on its position or configuration relative to other objects or systems, as well as the forces acting on it. Potential energy can be converted into other forms of energy, such as kinetic energy or thermal energy, depending on the situation.

The maximum displacement angle observed in a simple pendulum system is directly related to the initial potential energy and the gravitational potential energy of the system. As the pendulum is pulled away from its resting position, it gains potential energy, which is then converted to kinetic energy as it swings back towards the center.

Learn more about Potential Energy from the given link

https://brainly.com/question/14427111

#SPJ1

According to a variety of sources, writing assignments in college courses at the entry level are typically 5-7 pages long, while those in courses at the main layer can be as long as 15-20 pages.

The vast majority of the times, the project will give precise instructions on how many words or pages that must produce. This is frequently a range instead of a precise figure   Always check to your teacher if you're unsure.

Length of Assignment refers to the number of days between the initial Operational Phase just at Incident or report site on the originating Resource Order and the beginning of returning travel to the Authorized Dispatch Place upon completion or completion of the assignment.

To know more about layer visit:

https://brainly.com/question/7181864

#SPJ1

In SI units, the needed power for the air conditioner under these operating circumstances is most closely 69.3 kW.

The power required for a Carnot engine operating as an air conditioner is given by the formula

[tex]P = \frac{Q_H}{\eta },[/tex]

where [tex]Q_H[/tex] is the rate of heat removed from the house, and η is the Carnot efficiency. The Carnot efficiency is given by the formula,

[tex]\eta =\frac{ 1 - T_C}{T_H}[/tex]

where [tex]T_C[/tex] is the cold reservoir temperature (293 K) and [tex]T_H[/tex]is the hot reservoir temperature (369 K).

Thus, the power required for the air conditioner is given by:

[tex]P = \frac{14 kJ/s }{(\frac{1 - 293 K}{369 K}) }\\=\frac{ 14 kJ/s }{ (1 - 0.798) }\\[/tex]

[tex]= \frac{14 kJ/s }{ 0.202 }\\P= 69.3 kW.[/tex]

Therefore, the power required for the air conditioner under these operating conditions, in SI units, is closest to 69.3 kW.

learn more about power refer:brainly.com/question/28794336

#SPJ1

Consequently, the light's wavelength that caused the multiply-slit interference pattern was around 546 nm.

Solution and Justification: Interference patterns are produced when waves of identical (or what very similar) frequencies collide. The amplitudes of these waves may then either be raised (via constructive interference) or lowered.

Fringes are the light lines that alternate with the black lines in the interference pattern. The following equation can be used to calculate the wavelength for the double-slit experiment: dissipates ≈ xd / L.

To know more about interference patterns visit:

https://brainly.com/question/13081724

#SPJ1

The correct question is

Problem 4: Suppose a double-slit interference pattern has its third minimum at an angle of 0.256° with slits that are separated by 293 μm.

Randomized Variables

0 = 0.256°

d=293 μm

Calculate the wavelength of the light in nm.

Gra

Ded

Pote