If the guy on the left starts to pull on the pole, they will meet in the middle since the pole is massless and the surface is frictionless.
If the two guys are holding onto a massless pole and standing on horizontal frictionless ice, then there is no net external force acting on the system, and the center of mass of the system will remain stationary. When the guy on the left starts to pull on the pole, he exerts a force on the pole to the left. According to Newton's third law, the pole exerts an equal and opposite force on the guy to the right, causing him to move to the right.
The position where they will meet depends on the magnitudes of the forces that the guy on the left exerts on the pole and the distance between the two guys. If we assume that the guys initially hold the pole at its center of mass, then we can use the principle of conservation of momentum to determine where they will meet.
Since the center of mass remains stationary, the initial momentum of the system is zero. After the guy on the left starts pulling, the system gains a net momentum to the left equal to the force that he exerts on the pole multiplied by the time that he pulls. In order to conserve momentum, the guy on the right must move an equal distance to the right.
Learn more about friction:
https://brainly.com/question/24338873
#SPJ11
A solid cylinder of mass M = 1.25 kg and radius R = 13.5 cm pivots on a thin fixed frictionless bearing a string wrapped around the cylinder pulls downward with a force of F = 7.259 N
What is the magnitude of the angular acceleration of the cylinder?
86.03259 rad/s^2
Consider that instead of force F, a block with mass 0.74 kg with force = 7.259 N is attached to the cylinder with a mass less string.
What is now the magnitude of the angular acceleration of the cylinder
39.3943 rad/s^2
How far does the mass M travel downward before T equals 0.49S and T equals 0.69 S.
0.62755 m
The cylinder is changed to one with the same mass and radius but a different moment of inertia starting from mass starting from rest. The mass is now moved. The distance of 0.448 mass in the time interval of 0.47 seconds.
Find the Inertia of the new cylinder
The inertia of the new cylinder is 0.0566 kgm². Other answers provided are correct.
How to find inertia?The moment of inertia of the new cylinder can be calculated using the formula:
I = (M × d²) / (4 × Δθ)
Where:
M = mass of the cylinder
d = distance moved by the mass
Δθ = change in angular displacement (in radians)
Substituting the given values:
I = (1.25 × 0.448²) / (4 × 0.47)
I = 0.0566 kgm²
Therefore, the moment of inertia of the new cylinder is 0.0566 kgm².
Find out more on moment of inertia here: https://brainly.com/question/3406242
#SPJ1
As a particle moves 12 meters along an electric field of strength of 80 Newtons per Coulomb its electrical potential energy decreases by 5.2 x 10^-18 Joules.
What is the particle charge?
Giving out brainliest please help this is due today.
Answer:
The electric potential energy (EPE) of a particle with charge q moving through an electric field of strength E over a distance d is given by the formula:
EPE = qEd
In this problem, we are given:
EPE = 5.2 x 10^-18 J
E = 80 N/C
d = 12 m
Substituting these values into the formula, we get:
5.2 x 10^-18 J = q(80 N/C)(12 m)
q = 5.2 x 10^-18 J / (80 N/C)(12 m)
q = 6.875 x 10^-21 C
Therefore, the particle charge is 6.875 x 10^-21 Coulombs.
Explanation:
BRAINLIEST PLEASE!
in a double slit experiment, the fringe spacing on a screen 100 cm behind the slits is 4 mm. what will the fringe spacing be if the screen distance is doubled to 200 cm?
On the screen, 200 cm behind the slits, the fringe spacing will be 8 mm.
How will the fringe spacing change as the distance from the screen grows?Due to its dependence on L, the spacings between various fringes get smaller as the distance between the slits gets more. The space between various fringes grows as the light's wavelength rises because this is a wavelength-dependent property.
The equation: gives the screen's fringe spacing in a double-slit experiment.
dsin(theta) = mlambda
The fringe spacing will therefore double if the screen distance is increased from 100 cm to 200 cm.
The new fringe spacing will be as follows:
2 * 4 mm = 8 mm
To know more about wavelength visit:-
https://brainly.com/question/13533093
#SPJ1
what law(s) in physics can be used to explain the behaviors of the carts, in this interactive, whether or not the collision was elastic or inelastic?
The laws of physics that can be used to explain the behaviors of the carts in this interactive, whether or not the collision was elastic or inelastic, are the laws of conservation of momentum and conservation of energy.
The law of conservation of momentum states that the total momentum of the objects before the collision is equal to the total momentum of the objects after the collision.
The law of conservation of energy states that the total energy of the system remains constant, regardless of the type of collision that takes place.
If the collision is elastic, then the total kinetic energy of the objects before and after the collision is equal. If the collision is inelastic, then the total kinetic energy of the objects after the collision is less than before the collision.
This law applies to both elastic and inelastic collisions. Conservation of energy also applies to both elastic and inelastic collisions. In elastic collisions, the kinetic energy is conserved.
Learn more about the Laws of conservation of momentum here:
https://brainly.com/question/7538238
#SPJ11
suppose that a 50-kilogram cart and a 70-kilogram cart, both traveling at 5 meters per second in opposite directions, collide and stick together. in meters per second with one significant figure, what is the speed of the final composite object?
The final speed of the composite object is 0.8 m/s.
We can use the law of conservation of momentum, which states that the total momentum of a closed system remains constant. In this case, the initial momentum of the system is,
initial momentum = (50 kg) x (-5 m/s) + (70 kg) x (5 m/s)
= -250 kg m/s + 350 kg m/s
= 100 kg m/s
Since the carts stick together after the collision, their masses add up to give the mass of the final composite object,
mass of final object = 50 kg + 70 kg
= 120 kg
Using the conservation of momentum, we can solve for the final velocity of the composite object,
initial momentum = final momentum
100 kg m/s = (120 kg) x (v) m/s
Solving for v,
v = 0.83 m/s
Rounding off to one significant figure, velocity is, 0.8 m/s.
To know more about collision, here
brainly.com/question/12117971
#SPJ4
what unusual circumstances caused kepler to become a lawyer in his 40's? 7. what is the meaning of expand?
Unusual circumstances caused Kepler to become a lawyer in his 40s'. Johannes Kepler was forced to switch professions due to a lack of funds. Johannes Kepler was unable to pay his bills by working as a mathematician and scientist alone.
As a result, in his forties, Kepler began studying law to make ends meet. Kepler was assigned to be an adviser to the Emperor Ferdinand's chancellor due to his success in the scientific field, and it was there that he learned the importance of the law.
Kepler became a professor of mathematics at the University of Graz in Austria in 1594, and he held this position for eleven years before being expelled for theological reasons.
He later moved to Prague, where he was appointed the mathematician to Rudolf II, the Holy Roman Emperor, and remained in that position until Rudolf's death in 1612.2.
Meaning of expand:
Expand means to make or become larger or more extensive. It also means to write out or present in more detail. It also means to spread out, stretch out, or unfold.
To learn more about Kepler:
https://brainly.com/question/1608361#
#SPJ11
what is the relative permittivity of the dielectric medium in which the electromagnetic wave traveling g
The relative permittivity of a dielectric medium is a measure of the electric field created within it when exposed to an electromagnetic wave. The relative permittivity is calculated by comparing the electric field in the dielectric medium to the electric field in a vacuum.
In a dielectric medium, the electric field is weakened due to the presence of molecules that absorb some of the energy from the electromagnetic wave. The greater the number of molecules, the higher the relative permittivity of the dielectric medium. The lower the relative permittivity of a dielectric medium, the faster the speed of the electromagnetic wave traveling through it.
In conclusion, the relative permittivity of the dielectric medium in which the electromagnetic wave is traveling can be used to measure the electric field within it. The greater the number of molecules present in the dielectric medium, the higher the relative permittivity and the slower the speed of the electromagnetic wave.
To know more about relative permittivity refer here:
https://brainly.com/question/29288724#
#SPJ11
Like for the Mars Pathfinder mission, the entry and landing on Mars use a combination of aerodynamic drag (during entry, the spacecraft is protected by a heat shield), rockets, parachutes, and inflated airbags. The last phase of the entry & landing sequence is controlled by the on-board computer system. When the altitude reaches a certain critical value, the spacecraft velocity is 40 m/s. At this altitude, the airbags are inflated and a solid rocket engine is turned on to slow down the spacecraft prior to impact on the Martian soil.
Knowing that the thrust generated by the rocket engine is 4810 N, and the propellant burns for 10 seconds before impact, what will be the velocity at impact in m/s? . Assume that the spacecraft drag (due to parachute & inflated airbags) is constant and is 7500 N, and that the spacecraft mass is 2060 kg. Also, the Martian gravitational acceleration is equal to 3.7 m/s2.
Hint: to solve this problem, make sure to include all forces acting on the spacecraft (weight, drag and thrust).
The velocity at impact will be (-10) m/s if all forces acting on the spacecraft (weight, drag, and thrust) are included.
To find the velocity at impact, first, we need to consider all the forces acting on the spacecraft (weight, drag, and thrust). Then, we can use these forces to find the net force and acceleration. Finally, we can calculate the impact velocity.
Step 1: Calculate the weight of the spacecraft:-
Weight = mass × gravitational acceleration
Weight = 2060 kg × 3.7 m/s² = 7618 N
Step 2: Calculate the net force acting on the spacecraft:-
Net force = thrust - drag - weight
Net force = 4810 N - 7500 N - 7618 N = -10308 N
Step 3: Calculate the acceleration of the spacecraft:-
Acceleration = net force/mass
Acceleration = -10308 N / 2060 kg = -5 m/s²
Step 4: Calculate the velocity at impact:-
We know that the initial velocity is 40 m/s, and the propellant burns for 10 seconds. We can use the equation of motion (v = u + at) to find the final velocity:-
Final velocity(v) = initial velocity(u) + acceleration(a) × time(t)
Final velocity = 40 m/s + (-5 m/s²) × 10 s = 40 m/s - 50 m/s = -10 m/s
Therefore, the velocity at impact will be -10 m/s (the negative sign indicates that the velocity is in the opposite direction to the initial velocity).
Learn more about thrust: https://brainly.com/question/742835
#SPJ11
jacob asks imad to explain to jacob how the number of field lines and the magnitude of the charge are related. which response is correct?
To explain to Jacob how the number of field lines and the magnitude of the charge are related, Imad should mention that the number of field lines is proportional to the magnitude of the charge.
There is a relationship between the number of field lines and the magnitude of the charge. The magnitude of the charge is directly proportional to the number of field lines that pass through the surface that is perpendicular to the field lines. The number of field lines created by a charge or charges is proportional to the charge or charges' magnitude.
In the absence of any other charges or objects, the field lines emanating from a charge with magnitude q will terminate on another charge with magnitude q of opposite polarity, according to Coulomb's law. Therefore, Jacob should be told that the number of field lines is proportional to the magnitude of the charge, meaning that if the charge's magnitude increases, the number of field lines will increase as well.
Learn more about Coulomb's law at:
https://brainly.com/question/506926
#SPJ11
A common technique used to measure the
force constant k of a spring is the following:
Hang the spring vertically, then allow a
mass m to stretch it a distance d from the
equilibrium position under the action of the
“load” m g.
Find the spring constant k if the spring
is stretched a distance 87 m by a suspended
weight of 69 N. The acceleration of gravity is
9.8 m/s^2.
Answer in units of N/m.
Answer:
The answer to your problem is, the spring constant K should be 6 N/m.
Explanation:
When the force F should be applied at the spring so it generated the stretching distance
i.e.
F = k.x
F means the force
K means the constant
x means the stretching distance
Here the weight should be 96 N, the stretching distance is 16 km
Now the spring constant should be:
K = f/x
= 96/16
= 6 N/m
Thus the answer to your problem is, the spring constant K should be 6 N/m.
what is the inductance of a coil if the coil produces an emf of 2.50 v when the current in it changes from -29.0 ma to 33.0 ma in 14.0 ms ?
The inductance of a coil, if the coil produces an emf of 2.50 V when the current in it changes from -29.0 mA to 33.0 mA in 14.0 ms, is 0.146 H.
Inductance of a coil The amount of electromotive force generated across a conductor when there is a change in the current flowing through it is defined as self-inductance.
The unit of inductance is the Henry (H), with the symbol L. The voltage induced in the coil is determined by the current passing through it, as well as the coil's inductance. Faraday's law of electromagnetic induction establishes a link between the two entities.
What is Faraday's law of electromagnetic induction?The principle of electromagnetic induction is defined by Faraday's law, which states that the emf (electromotive force) produced by a change in magnetic flux linkage with time is proportional to the negative of the rate of change of magnetic flux linkage.
When there is a change in magnetic flux passing through a coil, this law predicts that an electromotive force is generated in it.
What is emf?The acronym emf stands for electromotive force, and it represents the quantity of energy that drives current flow in a circuit. The unit of emf is the volt (V).
What is inductance?The amount of electromotive force generated across a conductor when there is a change in the current flowing through it is defined as self-inductance.
The unit of inductance is the henry (H), with the symbol L.
What is the formula for the inductance of a coil?The inductance of a coil is given by the formula: L = E/(di/dt)
Where L is the inductance of a coil E is the voltage induced in the coil di/dt is the rate of change of current passing through the coil.
Thus, the inductance of a coil, if the coil produces an emf of 2.50 V when the current in it changes from -29.0 mA to 33.0 mA in 14.0 ms, is 0.146 H.
To know more about inductance of a coil refer here:
https://brainly.com/question/31388862#
#SPJ11
A new planet is discovered orbiting a star with a mass of [tex]3.5\times 10^{31}[/tex] kg at a distance of [tex]1.2\times10^{11}[/tex] m. Assume that the orbit is circular. What is the orbital speed of the planet? What is the orbital period of the planet?
The orbital speed of the planet is [tex]4.41 * 10^3 m/s[/tex] and the orbital period of the planet is 22.608s when its mass is [tex]3.5 * 10^{31}kg.[/tex]
The mass of the planet (m) = [tex]3.5 * 10^{31}kg[/tex]
The distance of star from the planet (r) = [tex]1.2 * 10^{11}m[/tex]
The planet is moving in circular shape around the star.
The orbital speed of the planet = v
The orbital speed of the planet can be calculated using the equation for the orbital speed, which is given by [tex]v = \sqrt{(GM/r)}[/tex], where G is the gravitational constant = [tex]6.67 * 10^{-11} m^3/(kg*s^2)[/tex]
[tex]v = \sqrt{6.67 * 10^{-11} m^3/(kg*s^2) * 3.5 * 10^{31}kg/1.2 * 10^{11}m}[/tex]
[tex]v = \sqrt{23.345 * 10^{20}/1.2 * 10^{11}} = \sqrt{19.45 * 10^9}[/tex]
[tex]v = 4.41 * 10^3 m/s[/tex]
the orbital speed of the planet is = [tex]4.41 * 10^3 m/s[/tex]
The orbital time period of the planet can be calculated using the equation for the orbital period, which is given by [tex]T = 2 * \pi * \sqrt{(r^3/GM)}[/tex]
[tex]T = 2 * \pi * \sqrt{(1.2 * 10^{11})^3/6.67 * 10^{-11} m^3/(kg*s^2) * 3.5 * 10^{31}kg}[/tex]
[tex]T = 2 * \pi * \sqrt{(1.2 * 10^{11})^3/23.345 * 10^{20}}[/tex]
[tex]T = 2 * \pi * \sqrt{0.07 * 10^{13}}[/tex]
[tex]T = 2 * \pi * 0.26 * 3.9[/tex]
T = 22.608s
Hence the orbital period of the planet is 22.608s
To learn more about speed click here https://brainly.com/question/28224010
#SPJ1
A student holds a 0.06 kg egg out a window. Just before the student releases the egg, the egg has a 8.0 J of gravitational potential energy with respect to the ground. How far is the students arm from the ground? a.) 133m b.) 13.3m c.) 0.8m d.) 0.08m
how do the vertical and horizontal components of velocity change for a ball tossed at an upward angle?
When a ball is thrown at an upward angle, the vertical and horizontal components of velocity change in different ways. The vertical component of velocity decreases to a certain point before increasing again due to gravity. However, the horizontal component of velocity remains constant throughout the motion of the ball.
When a ball is tossed at an upward angle, the velocity has two components; vertical and horizontal components. The horizontal component is unaffected since there is no force acting on it.
The vertical component is influenced by the gravitational force acting on the ball. As the ball goes up, the vertical component of velocity decreases to zero. The maximum point is reached when the ball's velocity is zero. At this point, the ball stops going up and starts going down. As the ball falls, the vertical component of velocity increases in the opposite direction to the gravitational force acting on it.
Therefore, the vertical component of velocity changes as the ball is tossed at an upward angle. It increases, then decreases to zero at the top of its trajectory, and then increases again as the ball falls back to the ground. The horizontal component of velocity is constant throughout the motion of the ball because there is no force acting on it.
Hence, when a ball is tossed at an upward angle, the vertical and horizontal components of velocity change in different ways.
To know more about the components of velocity, refer here:
https://brainly.com/question/14431896#
#SPJ11
what is the distance between fringes produced by a diffraction grating having 130 lines per centimeter for 580 nm light, if the screen is 1.50 m away?
A diffraction grating that has 130 lines per centimeter for 580 nm light, if the screens are 1.50 m apart, then the distance between the edges is 30.6 mm
The formula for the distance between fringes for a diffraction grating is given:
d sinθ = mλ,
where d is the spacing between the grating lines, θ is the angle between the incident beam and the diffracted beam, m is the order of the diffraction maximum, and λ is the wavelength of light.
It can also be expressed as
Δy = mλD/d,
where Δy is the distance between adjacent fringes on the screen, D is the distance from the grating to the screen, and d is the spacing between the grating lines.
Given data:
Spacing between grating lines, d = 1/130 cm = 0.00769 cm
The wavelength of light, λ = 580 nm = 580 × 10⁻⁹ m
Distance from grating to the screen, D = 1.50 m
The formula to calculate the distance between fringes produced by a diffraction grating is given:
Δy = mλD/d
Now, substituting the given values in the above formula we get,
Δy = (1)(580 × 10⁻⁹ m)(1.50 m)/(0.00769 × 10⁻⁴ m)
Δy = 0.0306 m = 30.6 mm
Therefore, the distance between fringes produced by a diffraction grating having 130 lines per centimeter for 580 nm light, if the screen is 1.50 m away is 30.6 mm.
Learn more about diffraction grating at https://brainly.com/question/13104464
#SPJ11
a 4.0 kg body has two times the kinetic energy of an 8.5 kg body. calculate the ratio of the speeds of these bodies.
The ratio of the speeds of these bodies is 2.06
The kinetic energy of an object is equal to 1/2mv^2.
For the 4.0 kg body, the kinetic energy is 1/2 (4.0 kg)v^2
For the 8.5 kg body, the kinetic energy is 1/2 (8.5 kg)u^2
Given that the kinetic energy of the 4.0 kg body is twice the kinetic energy of the 8.5 kg body, we can set up the following equation:
1/2 (4.0 kg)v^2 = 2 * (1/2 (8.5 kg)u^2)
Simplifying the equation, we have:
2 (4.0 kg)v^2 = (8.5 kg)u^2
Solving for the ratio of the speeds, we get:
v^2/u^2 = (8.5 kg)/(2 (4.0 kg)) = 4.25
Therefore, the ratio of the speeds of the two bodies is equal to the square root of 4.25, which is approximately equal to 2.06.
So, the 4.0 kg body is moving at approximately 2.06 times the speed of the 8.5 kg body.
To know more about kinetic energy click here:
https://brainly.com/question/999862
#SPJ11
a student used the setup below to investigate electric current and fields. which action will increase the current in the wire
The final answer are current is directly proportional to the potential difference and inversely proportional to the wire's resistance. Therefore, decreasing the resistance of the wire increases the current in the wire.
To increase the current in the wire of an electric current and field investigating setup, the action to be taken is to decrease the resistance of the wire. What is an electric current? The flow of electrons in a conductor is known as an electric current. To complete an electric circuit, the electrons must flow continuously in a circular pattern.
The electron movement is generated by a power supply, such as a battery. Electrons are pushed out of one end of the battery by a voltage differential between the battery terminals (the potential difference). Electrons enter the other end of the battery and complete the circuit.
The potential difference between the battery terminals drives the electrons around the circuit. This generates an electric current. The formula for current is: I = Q/t Where I is the current, Q is the amount of charge transferred, and t is the time taken.
What is the relationship between electric current and fields? When a charged particle moves through a magnetic field, a force is exerted on it. This force is proportional to the particle's velocity, as well as the magnetic field strength and the charge's magnitude.
The mathematical equation that describes this relationship is: F = qvB sinθ Where F is the force on the charged particle, q is the charge, v is the velocity, B is the magnetic field strength, and θ is the angle between the velocity vector and the magnetic field vector.
In the wire, the current is directly proportional to the potential difference and inversely proportional to the wire's resistance. Therefore, decreasing the resistance of the wire increases the current in the wire.
To know more about electric current refer here:
https://brainly.com/question/2264542#
#SPJ11
an atom that has become charged by gaining or losing electrons
At the point when an atom gains/loses an electron, the atom becomes charged and is called an ion.
Acquiring an electron brings about a negative charge, so the atom is an anion.
Losing an electron brings about a positive charge, so an atom particle is a cation.
An atom is a nonpartisan molecule that contains an equivalent number of protons and electrons. A particle is an atom that has lost or acquired at least one electron and has a positive or negative charge subsequently. In this way, the principal contrast between an atom and a particle is that an atom has an impartial charge while a particle has a positive or negative charge.
A few instances of ions include:
Chloride anions (Cl - )
Sulfate anions (SO 42-)
Nitrate anions (NO 3-)
Calcium cation (Ca 2+)
Manganese (II) cation (Mn 2+)
Hypochlorite anion (ClO - )
Ammonium cation (NH 4+)
Ferric cation (Fe 3+)
to know more about the electron click here:
https://brainly.com/question/28337734
#SPJ4
if a parcel of air rises without any external forcing, what can be said about the temperature of the parcel?
When a parcel of air rises without any external forces ,the temperature decreases so it expands because there's less pressure higher up in the atmosphere.
The temperature decreases because
As the parcel expands, it cools down, and this cooling happens because the air is doing work against the atmospheric pressure. This cooling is called adiabatic cooling, (The rate of cooling is known as the dry adiabatic lapse rate when the air is dry, while the rate of cooling is known as the moist adiabatic lapse rate when the air is saturated with water vapor) and it causes the temperature of the parcel to decrease by around 10 degrees Celsius for every 1000 meters it rises, assuming the parcel is saturated with water vapor.So, in simpler terms, if a parcel of air rises on its own, it gets cooler as it goes up because it's expanding and doing work against the air around it.(The decrease in pressure causes the parcel to cool, leading to a drop in temperature.)To learn more about the parcel of air:
https://brainly.com/question/30580488.
#SPJ11
if a certain passenger arrives at the station at a time uniformly distributed between 7 and 8 a.m. and then gets on the first train that arrives, what proportion of time does he or she go to destination a?
The probability that the passenger will get on the first train that arrives is the same as the probability that they will arrive at the station between 7 and 8 a.m., which is 1/2.
The uniform distribution is a type of probability distribution where all outcomes are equally likely. In this case, the passenger arrives at the station at a time that is uniformly distributed between 7 and 8 a.m. Therefore, the probability that the passenger will get on the first train that arrives is the same as the probability that they will arrive at the station between 7 and 8 a.m., which is 1/2.
In other words, the probability that the passenger will go to destination A is 1/2. This is because the probability that they will arrive between 7 and 8 a.m. and get on the first train that arrives is the same as the probability that they will arrive between 7 and 8 a.m., which is 1/2.
Therefore, the proportion of time the passenger goes to destination A is 1/2. This is because the probability of them getting on the first train that arrives is the same as the probability of them arriving between 7 and 8 a.m., which is 1/2.
For more such questions on Probability distribution.
https://brainly.com/question/14210034#
#SPJ11
a balloon floats inside a stopped car. when the car starts moving forward, the balloon appears to move backward relative to the car. which statement best explains this observation?(1 point)responses
The balloon is being pushed backward by air pressure. When a car begins to move, air pressure builds up in front of the car, pushing air backwards and creating a wind that affects the balloon inside. As the car accelerates, the wind increases, and the balloon is pushed backwards relative to the car. This phenomenon is known as the 'Venturi Effect'.
When a car moves, it creates a pressure difference in front of and behind the car. This difference in pressure creates a force that moves air around the car. In the case of the balloon, the force of the wind created by the car is pushing the balloon backwards. This is the same effect you feel when a fan is turned on, but in reverse.
The Venturi Effect is a phenomenon in fluid dynamics which explains the decrease in pressure when the velocity of the fluid increases. In the case of the balloon, this decrease in pressure created by the wind of the car causes it to move backwards. This is because air is being pushed away from the balloon and the surrounding area, creating a low-pressure environment.
In summary, the balloon is being pushed backwards by air pressure as the car moves forward. This is known as the Venturi Effect, and it is caused by the decrease in pressure caused by the wind of the car.
For more similar questions on" balloon"
brainly.com/question/30457768
#SPJ11
if the average power requirement in your home is 4.0 kw k w and you can convert solar power to electric power with 14 % % efficiency, how large a collector area will you need to meet all your household energy requirements from solar energy? express your answer with the appropriate units.
To meet all your household energy requirements from solar energy with a 14% efficiency, you will need a solar collector area of approximately 28.57 square meters.
To determine the area of solar collector required to meet your household energy requirements, we can use the following formula:
Collector area = Power requirement / (Solar irradiance x Efficiency)
Where,
Power requirement = 4.0 kW
Efficiency = 14% = 0.14 (as given)
Solar irradiance = average solar irradiance on a surface perpendicular to the sun's rays is approximately 1000 W/m² (at sea level on a clear day)
Plugging in the values, we get:
Collector area = 4.0 kW / (1000 W/m² x 0.14)
Collector area = 28.57 m²
Solar energy refers to the radiant light and heat that is emitted by the sun and captured using various technologies such as solar panels and solar thermal collectors. This energy can then be converted into electricity or used directly for heating and cooling purposes.
Solar energy is a renewable and abundant source of energy, and it is a clean alternative to traditional fossil fuels that release harmful emissions into the environment. It also provides energy independence and reduces dependence on foreign oil.
Solar energy has many applications, ranging from powering homes and businesses to providing electricity for remote areas without access to traditional power grids. It is also used in the transportation sector, with solar-powered vehicles and charging stations becoming increasingly popular.
To learn more about Solar energy visit here:
brainly.com/question/404452
#SPJ4
a wooden block has a volume of 12.5 liters and a mass of 5.0 kg. what volume of water must be displaced if the wooden block is to float?
A wooden block has a volume of 12.5 litres and a mass of 5.0 kg. 5.0 litres of water must be displaced if the wooden block is to float.
What volume of water must be displaced if the wooden block is to float?The density of wood is less than the density of water. As a result, to float on water, an object made of wood must displace an amount of water greater than its weight.
The formula for calculating the density of an object is:
density = mass/volume
Rearranging this equation gives: v
olume = mass/density
From the information given in the question, the mass of the wooden block is 5.0 kg, and the volume is 12.5 liters.
Density is the mass divided by the volume:
density = mass/volume = 5.0 kg / 12.5 L = 0.4 kg/L
To float on water, the density of the wooden block must be less than the density of water, which is 1 kg/L.
Applying the formula above, we can solve for the volume of water displaced by the wooden block, which is equal to the volume of the block:
volume = mass/density = 5.0 kg / 1 kg/L = 5.0 L
Thus, 5.0 liters of water must be displaced if the wooden block is to float.
To know more about volume refer here:
https://brainly.com/question/14325102#
#SPJ11
which planets are you more likely to see transit, planets closer to or further from their host stars? explain your reasoning.
The transit technique used to identify planets involves looking for small dips in a star's brightness as a planet crosses in front of it. This causes a slight decrease in the amount of light received by the Earth from that star, which is then detected by astronomers.
Transit method is a technique that uses the detection of planetary transits to identify exoplanets. By detecting dips in the brightness of a star, caused by a planet crossing in front of it, this method allows for the detection of planets orbiting other stars beyond our own solar system.
To find exoplanets, astronomers look for periodic dips in the brightness of stars that are caused by a planet passing in front of them. The amount of light that a planet blocks depends on its size, so larger planets create deeper dips in the star's brightness.
The timing and duration of the dips also provide information about the planet's orbit, size, and composition.
Transiting planets are therefore more likely to be detected if they have a large radius compared to their host stars, or if their orbital periods are short.
The transit method is also more effective when the host star is relatively small and bright, as this makes the planet's transit easier to detect.
To know more about transit technique, refer here:
https://brainly.com/question/12484173#
#SPJ11
what is the approimate electrostatic force between two protons seperated bvy a distance of 1.0x10^-6
The electrostatic force between two protons separated by a distance of 1.0 × 10^-6 m is 2.3 × 10^-8 N.
Electrostatic force is the force between two electrically charged objects. This force can either be attractive or repulsive.
It is proportional to the product of the two charges and inversely proportional to the square of the distance between them.
The force is defined by Coulomb's law which states that:
The electrostatic force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.
The formula for Coulomb's law is given as:F = kq1q2/r2
WhereF is the electrostatic forcek is Coulomb's constantq1 and q2 are the charges of the two particles is the distance between the two particles in meters.
The value of Coulomb's constant is 9.0 × 10^9 Nm^2/C^2.Let's consider two protons separated by a distance of 1.0 × 10^-6 m. The charge on each proton is +1.6 × 10^-19 C.
F = kq1q2/r2F = (9.0 × 10^9 Nm^2/C^2)(+1.6 × 10^-19 C)(+1.6 × 10^-19 C)/(1.0 × 10^-6 m)^2F = 2.3 × 10^-8 N
To know more about electrostatic force refer here:
https://brainly.com/question/9774180#
#SPJ11
a wire 35 cm long is parallel to a 0.53- t uni- form magnetic field. the current through the wire is 4.5 a. what force acts on the wire?
Answer: The force acting on the wire is 0 N
The formula for the force exerted by a magnetic field on a current-carrying wire is F = BIL sin(theta), Where, F = force B = magnetic field strength, I = current, L = length of the wire, Theta = angle between the wire and the magnetic field direction Given that Length of the wire (L) = 35 cm = 0.35 m. Magnetic field strength (B) = 0.53 T
Current through the wire (I) = 4.5 A, We need to find the force acting on the wire (F).The angle between the wire and the magnetic field is 0° as the wire is parallel to the field. Therefore, sin(theta) = sin(0°) = 0° Using the formula, F = BIL sin(theta) F = 0.53 T × 4.5 A × 0.35 m × sin(0°) = 0 N
Therefore, the force acting on the wire is 0 N, as the wire is parallel to the magnetic field direction. It means that the magnetic field does not exert any force on the wire. Note that the force will be non zero if the wire is not parallel to the magnetic field direction.
Know more about magnetic field here:
https://brainly.com/question/14848188
#SPJ11
two balls with masses of 2 kg and 6,3 kg travel toward each other at speeds of f14 and 3 respectively if the balls have a head on inelastic collision and the 2 kg ball recoils with a speed of 3.2 how much kinetic energy
If the balls have a head-on, inelastic collision and the 2.0-kg ball recoils with a speed of 3.2 m/s, the kinetic energy lost in the collision is 364.6 J.
Using conservation of momentum, we can find the final velocity:
m1 * v1 + m2 * v2 = (m1 + m2) * vf
Solving for vf, we get:
vf = (m1 * v1 + m2 * v2) / (m1 + m2)
= (2.0 kg * 14 m/s + 6.3 kg * 4.0 m/s) / (2.0 kg + 6.3 kg)
= 6.0 m/s
The final total kinetic energy of the system is:
KEf = (1/2) * (m1 + m2) * vf^2
= (1/2) * 8.3 kg * (6.0 m/s)^2
= 112.2 J
The kinetic energy lost in the collision is the difference between the initial and final kinetic energies:
KE lost = KEi - KEf
= 476.8 J - 112.2 J
= 364.6 J
An inelastic collision is a type of collision between two or more objects in which the total kinetic energy of the system is not conserved. In an inelastic collision, some or all of the kinetic energy of the colliding objects is converted into other forms of energy such as heat, sound, or deformation of the objects.
In an inelastic collision, the colliding objects stick together after the collision and move with a common velocity. This is in contrast to an elastic collision, in which the colliding objects bounce off each other and the total kinetic energy of the system is conserved. Inelastic collisions can occur in many different situations, such as in car crashes, when two objects collide and stick together, or when a ball hits a wall and loses some of its kinetic energy due to deformation.
To learn more about Inelastic collision visit here:
brainly.com/question/15742157
#SPJ4
Complete Question: -
Two balls with masses of 2.0 kg and 6.3 kg travel toward each other at speeds of 14 m/s and 4.0 m/s, respectively. If the balls have a head-on, inelastic collision and the 2.0-kg ball recoils with a speed of 3.2 m/s, how much kinetic energy is lost in the collision?
shows three edge views of a square loop with sides of length = 0.250 m in a magnetic field of magnitude 2.00 T. Calculate the magnetic flux through the loop oriented a. perpendicular to the magnetic field, b. 60.0° from the magnetic field, and c. parallel to the magnetic field
The magnetic flux through the loop is 0.125 Wb when oriented perpendicular to the magnetic field, 0.0625 Wb when oriented 60.0° from the magnetic field, and 0 Wb when oriented parallel to the magnetic field.
To calculate the magnetic flux through the loop, we can use the formula:
Magnetic flux (Φ) = B × A × cosθ
where B is the magnetic field magnitude, A is the area of the square loop, and θ is the angle between the magnetic field and the loop's normal vector.
a. Perpendicular to the magnetic field (θ = 0°)
In this case, cosθ = cos(0°) = 1.
Area (A) = (side length)² = (0.250 m)² = 0.0625 m²
Φ = B × A × cosθ = 2.00 T × 0.0625 m² × 1 = 0.125 Wb
b. 60.0° from the magnetic field (θ = 60°)
In this case, cosθ = cos(60°) = 0.5.
Φ = B × A × cosθ = 2.00 T × 0.0625 m² × 0.5 = 0.0625 Wb
c. Parallel to the magnetic field (θ = 90°)
In this case, cosθ = cos(90°) = 0.
Φ = B × A × cosθ = 2.00 T × 0.0625 m² × 0 = 0 Wb
For more such questions on magnetic field
brainly.com/question/26257705
#SPJ11
it is observed that 2.53 coulombs of charge flow through a light-bulb over the course of 2.39 minutes. there are three light bulbs in the circuit, lined up one after the other. determine the amount of charge flowing through the third light bulb over the course of 9.80 minutes.
The amount of charge flowing through the third light bulb over the course of 9.80 minutes is 6.069C.
Since we know the relation between current and charge and also current is same in case of series connection and here three bulb connected in series.
I = q / t
given:
I = ?
q = 2.06 C
t = 2.59 minutes = 155.4 sec
I = 2.06 / 155.4 A
We have to find charge flow in 7.63 minutes
q = I x t
q = 2.06 / 155.4 x 7.63 x 60
q = 6.069C
In the field of physics, charge refers to a fundamental property of matter that describes the amount of electrical force that an object possesses. Charge is quantized, meaning that it comes in discrete units, and it can be either positive or negative. Objects that have the same type of charge (either positive or negative) repel each other, while objects with opposite charges attract each other. This is the basis for the behavior of electrical circuits, as well as the functioning of electronic devices.
Charge is also conserved, meaning that it cannot be created or destroyed, only transferred from one object to another. This is why electrical devices are designed to use energy efficiently, as any charge lost due to resistance in the circuit will be converted into heat and cannot be recovered.
To learn more about Charge visit here:
brainly.com/question/3412043
#SPJ4
ball and a magnet are released simultaneously from the same altitude. they both fall vertically, but the magnet passes through a coil on its way down. which one reaches the ground first? please make a couple of statements to support your answer.
Both the ball and the magnet will reach the ground at the same time because the presence of the coil does not affect the rate of free-fall acceleration of the magnet.
This is because, according to the principle of equivalence, objects with different masses fall at the same rate in a vacuum. In this case, the effect of the coil on the magnet is negligible since the magnet's mass is much smaller than that of the Earth. Therefore, both the ball and the magnet will experience the same acceleration due to gravity and reach the ground at the same time, regardless of the presence of the coil.
To know more about magnet, here
brainly.com/question/30437844
#SPJ4