Twelve seconds after starting from rest an object falling freely will have a speed of

Answers

Answer 1

Answer:

(4.9)×(12)^2 m/s

Explanation:

velocity =1/2 × g× t^2

g=9.8m/s^2

t=12sec


Related Questions

which form of the energy is used to generate electrical energy in a tidal power station

Answers

Tidal energy is the form of energy used to generate electrical energy.

The form of the energy is used to generate electrical energy in a tidal power station is kinetic energy.

What is kinetic energy?

Kinetic energy is the energy that an object has as a result of its movement. If we intend to accelerate an object, we should indeed apply force to it. Using force requires us to put in effort.

After work is completed, energy is transmitted to the object, and the object moves at a new constant speed.

Tidal energy is generated by the movement of our tides and oceans, where the intensity of the water from tide rise and fall is a type of kinetic energy.

Tidal power is related to gravitational hydropower, which uses water movement to propel a turbine and generate electricity.

Thus, kinetic energy is used to generate electrical energy in a tidal power station.

For more details regarding kinetic energy, visit:

https://brainly.com/question/26472013

#SPJ6

Physics help please !!!

Answers

Answer:

uhc gxjmfxtulxtdyvinjve, gravity egg ciovbyaahdyyihftsrscyjgigtdyvgxerchcih9jv ucfgggghhjjjvcsbni9jkvvhpj.

upfp73eidjdhxhxuelueljs NBA. aly7ryshzb. w m8

what happens when you mix water and baking soda

Answers

Nothing much. It doesn’t explode. Lol

Differences between law of flotation and Archimedes's principle​

Answers

Answer:

Differences between law of flotation and Archimedes's principle​

here

Explanation:

Which Scientist discovered
atomic Theory?​

Answers

Answer:

John dalton discovered

A black ball moving to the left at 3 m/s collides with a white ball at rest. Which direction will the balls move after the collision?

Answers

Answer: the location from where the black ball was thrown from because after the collision the  velocity will make it still go further not stop

Explanation:

What is the velocity of a car that traveled a total of 75 kilometers north in 1.5 hours?

What are you solving for?
What’s the equation?
Show work!
Help pleaseee!

Answers

Answer:

50km/hr is the velocity of a car that traveled a total of 75 km North in 1.5 hours.

Question 15 OT 25
Which process is an example of an exothermic reaction?
A. The reactions taking place in a cold pack
B. A plant using photosynthesis to create sugars
C. Natural gas burning on a stove
o
D. The reactions taking place inside a baking cake

Answers

Answer:

A. The reactions taking place in a cold pack

Explanation:

This is because in a cold pack, there is no heat gained therefore a reaction stands by losing it's own heat to the surrounding.

[tex].[/tex]

what happens to the value of g when we move from equator to the pole.the weight of an object is greater at poles than at equator .
why?​

Answers

We know that the size of the Earth is not a perfect sphere, it’s flattened near the poles and bulged near the equator. Since, the equator is bulged, the radius is greater. Since the radius is greater the gravity is lesser than compared to poles.

Hope you understand

How would you determine the sign of a charge on a body using an electroscope? PLEASE HELP!!!

Answers

Answer:

Now the electroscope will allow you to identify whether an object is positively or negatively charged. If you bring a negative object near the electroscope, the electrons in the scope will be repelled toward the leaves, balancing the charge.

Explanation:

The electrostatic force obeys the principle of linear super-position which basically states

that force between two particles does not get affected by the charge of the other and hence if the

rod is brought close to a suspended metal needle and is getting attracted then needle definitely

should possess opposite charge relative to the rod or basically negative charge as opposite charges

attract.

(b) In case the needle which is brought near the sus[ended needle and gets repelled that shows that

both of them possess same charge and hence positive charge on both objects and will start

repelling each other.

A mineral oil has a density of 0.875 g/cm3. Suppose you spread 0.60 g of this oil over the surface of water in a large dish with an inner diameter of 21.6 cm. How thick is the oil layer

Answers

With a density of 0.875 g/cm³, a sample of 0.60 g of this oil would have a volume V such that

0.875 g/cm³ = (0.60 g)/V   ==>   V ≈ 0.686 cm³

If the oil is spread out uniformly over the water's surface, then it forms a cylinder whose diameter is equal to that of the dish, 21.6 cm. Then the thickness d of the oil cylinder is such that

V = π ((21.6 cm)/2)² d   ==>   d0.0202 cm

An oil tanker has a mass of to, 40000 tonnes. It is 500m long and 40m wide. What is the mininum depth of harbor it requires?​

Answers

The minimum depth of harbor of the oil tank is 2.22 m

The given parameters:

mass of the oil tanker, m = 40,000 tonnes

length of the tanker, l = 500 m

width of the tanker, w = 40 m

To find:

minimum depth of harbor

Note: The specific gravity of oil is approximately 0.9

          The density of water ([tex]\rho_w[/tex]) = 1000 kg/m³

Covert the given mass to kilogram

1 tonne = 1000 kg

40,000 tonnes = 40,000,000 kg

The density of the oil tanker is calculated as:

[tex]S.G = \frac{\rho_o}{\rho_w} \\\\\rho_o = S.G \times \rho_w\\\\\rho_o = 0.9 \times 1000\\\\\rho_o = 900 \ kg/m^3[/tex]

The volume of the oil tanker is calculated as:

[tex]Volume = \frac{mass}{density} \\\\Volume = \frac{40,000,000}{900} \\\\Volume = 44,444.44 \ m^3[/tex]

The minimum depth of harbor is calculated as:

[tex]height = \frac{volume}{Length \times width} \\\\height = \frac{44,444.44}{500\times 40} \\\\height = 2.22 \ m[/tex]

The minimum depth of harbor of the oil tank is 2.22 m

Learn more here: https://brainly.com/question/18029392

Revolution: One orit of an object in space around another_ days?​

Answers

Answer:

365 days..

Explanation:

Hope it may help you シ︎♡︎

[tex] \huge\mathfrak\green{365 \: or \: 366 \: Days.}

[/tex]

[tex]Hope \: it \: helps[/tex]

What is the density of a block of marble that
occupies 287 cm3
and has a mass of 816 g?
Answer in units of g/cm3
.

Answers

Explanation:

Solution,

Volume (v)=287 cm^3

Mass(m)=816 g

Density(d)=m/v

=816/287

=2.84

So, the density of the block of marbles is 2.84 g/cm^3.

I hope it helped U

stay safe stay happy

What is the relationship between resistivity of a wire and length of a wire is?

Answers

[tex]\boxed{\sf R=\rho\dfrac{\ell}{A}}[/tex]

Or

[tex]\\ \rm\hookrightarrow \rho=R\dfrac{A}{l}[/tex]

Rho stands for resistivity of wireR stands for resistance of wire l stands for length of areaA stands for surface area of wire

2. Samuel leaves the end of a 4.0-m-high diving board and strikes the
water 1.3 s later, 3.0 m beyond the end of the board. Considering the
diver as a particle, determine:
(a) His initial velocity,
(b) The maximum height reached;
(c) The velocity Vf
with which he enters the water.

Answers

Answer:

a) v = 4.9 m/s at 62° above the horizontal

b) h = 0.94 m above the board or 4.94 m above the water

c) v = 10 m/s at 77° below the horizontal

Explanation:

Assume UP and FOREWARD are positive and the diving board is the origin.

Ignore air resistance.

s = s₀ + v₀t + ½at²

In the vertical

-4 = 0 + vy₀(1.3) + ½(-9.8)(1.3²)

vy₀ = 4.281 m/s

in the horizontal

3.0 = 0 + vx₀(1.3) + ½(0)(1.3²)

vx₀ = 2.307... m/s

v = √(4.281² + 2.307²) = 4.863...

tanθ = 4.281 / 2.307

θ = 61.680...

v² = u² + 2as

s = (v² - u²) / 2a

h = (0² - 4.281²) / 2(-9.8) = 0.9350...

v² = 4.863² + 2(9.8)(4)

v = 10.1019...

cosθ = 2.307/10.1019

θ = 76.798

(a) The initial velocity of Samuel is 4.02 m/s

(b) The maximum height reached by Samuel is 0.55 m

(c)  The final velocity when he enters the water is 5.20 m/s

The given parameter:

the height of the board, h = 4 mtime to strike the water, t = 1.3 sthe horizontal distance traveled, x = 3.0 m

(a) The initial velocity of Samuel is calculated as;

[tex]h = v_o_y t + \frac{1}{2} gt^2\\\\[/tex]

Assume downward motion to be in negative direction

The vertical component of the velocity is calculated as;

[tex]4 = 1.3\times v_0_y + 0.5\times 9.8\times 1.3^2\\\\4 = 1.3v_{0y} + 8.281\\\\1.3v_{0y} = 4- 8.281\\\\1.3v_{0y} = -4.281\\\\v_{0y} = \frac{-4.281}{1.3} \\\\v_{0y} = -3.293 \ m/s\\\\v_{0y} = 3.293 \ m/s \ \ \ (downwards)[/tex]

The horizontal component of the velocity is calculated as;

Assume forward motion to be in positive direction

[tex]x = v_{0x}t \\\\3 = 1.3v_{0x}\\\\v_{0x} = \frac{3}{1.3} \\\\v_{0x} = 2.308 \ m/s[/tex]

The resultant of initial velocity is calculated as;

[tex]v_0 = \sqrt{v_{0y}^2 + v_{0x}^2} \\\\v_0 = \sqrt{3.293^2 + 2.308^2} \\\\v_0 = \sqrt{16.17} \\\\v_0 = 4.02 \ m/s[/tex]

(b) The maximum height reached by Samuel is calculated as;

[tex]v_f_y^2 = v_0_y^2 + 2gh\\\\at \ maximum \ height \ v_{fy} = 0\\\\0 = v_0_y^2 + 2gh\\\\-2gh = v_0_y^2\\\\h = \frac{v_0_y^2}{-2g} \\\\h = \frac{(3.293)^2}{-2\times 9.8} \\\\h = -0.55 \ m\\\\h = 0.55 \ m \ (downwards)[/tex]

(c) The final velocity when he enters the water;

The height traveled before he hits the water, h = 0.55 m

[tex]v_f^2 = v_{0}^2 + 2gh\\\\v_f^2 = (4.02)^2 + (2\times 9.8\times 0.55)\\\\v_f^2 = 26.94\\\\v_f = \sqrt{26.94} \\\\v_f = 5.20 \ m/s[/tex]

Learn more here: https://brainly.com/question/13372763

astone is thrown upwards with an initial velocity of 25m/s atan angle of 30 to the ground.what is the work out the stones horizantal range ?

Answers

Answer:

Range is 62.5 metres

Explanation:

Time of flight

[tex]t = \frac{2u \sin( \theta) }{g} [/tex]

for range, acceleration is zero

from second newton's equation:

[tex]S = ut + \frac{1}{2} {at}^{2} [/tex]

but a = 0:

let range be x:

[tex]x = ut \\ x = \frac{2 {u}^{2} \sin( \theta) }{g} \\ \\ x = \frac{ \{2 \times 25 {}^{2} \sin(30 \degree) \}}{10} \\ \\ x = 62.5 \: metres[/tex]

[ taken g to be 10 m/s² ]

A uniform rod of length 0.7 m and mass 10 kg rotates freely about a horizontal axis passing through one end of the rod a bullet of mass 20 g traveling horizontally with velocity v=200 m/s penetrates the end of the rod. and hooked on the rod find the angular velocity of the rod when the bullet hits the bar

Answers

Answer:

ω = 1.7 rad/s

Explanation:

Conservation of angular momentum

Assuming the rod is initially hanging vertically at rest.

Initial angular momentum is carried by the bullet only

L = Iω = (mR²)(v/R) = mvR = 0.020(200)(0.7) = 2.8 kg•m²/s

the same angular momentum exists after impact, only the moment of inertia has increased by that of the rod. I = ⅓mR²

2.8 = (⅓(10)(0.7²) + 0.020(0.7²))ω

2.8 = (1.64313333...)ω

ω = 1.70406134...

What is the difference between a scientific theory and a scientific law

Answers

Answer:

Scientific laws are summaries or statements that describe a wide range of observations and results of experiments.

Scientific theories, on the other hand, are explanations for observations and results.

So, laws describe what happens and theories explain why things happen.

hope this help! ^^

PLEASE HELP
You are given a liquid mixture to identify as a colloid, suspension, or solution. When you shine light from a laser pointer you can see the beam spread out in the mixutre. Only some light passes through. What is the next test you should perform to determine the type of mixture?


Heat the mixture to evaporate the water.

Shine the light through again several times.

Wait to see if the particles settle out of the mixture.

Shake the mixture.

Answers

Waiting to see if the particles settle out of the mixture will be the next test to perform to determine the type of mixture.

What is a Mixture?

This comprises of two or more substances which aren't chemically bonded together.

Suspension is a heterogeneous mixture that settle out of solution while colloid is a heterogeneous mixture that do not settle out of solution which is why option C was chosen.

Read more about Mixture here https://brainly.com/question/2331419
#SPJ1

thanks for the points :D

Which of the following elements has properties different than the rest?
H
K
N
O

Answers

Answer:

I think K . If it not, then sorry.

Hope I helped you.

Answer: The answer [b] or also known as k

Explanation:

Three resistors 2 k\ohm, 2.5 k\ohm and 3 k\ohm are connected in series. A power supply is connected in the circuit, and applies a voltage of 10.00 V across all three. Calculate the current in the circuit. Enter results in terms of milliamps (mA).

Answers

Answer:

1.33 mA

Explanation:

V=IR

I=10/(7.5×10³)

=1.33×10-³A

=1.33mA

Late one night on a highway, a car speeds by you and fades into the distance. Under these conditions the pupils of your eyes have diameters of about 7.0 m m. The taillights of this car are separated by a distance of 1.4 m and emit red light (wavelength = 660 nm in vacuum). How far away from you is this car when its taillights appear to merge into a single spot of light because of the effects of diffraction?

Answers

660 because 7.0 is added is 1.4

Name another way that energy is made

Answers

Answer:

The three major categories of energy for electricity generation are fossil fuels (coal, natural gas, and petroleum), nuclear energy, and renewable energy sources. Most electricity is generated with steam turbines using fossil fuels, nuclear, biomass, geothermal, and solar thermal energy.

Explanation:

Solar

Wind

Geothermal

Hydrogen

TidaWave

Hydroelectric

Biomass

A scientist obtains images of a particular star, which appears as four separate stars.
Which phenomenon causes the star to appear this way?
O redshift
gravitational lensing
O principle of equivalence
O gravitational time dilation

Answers

Answer:

gravitational lensing

Explanation:

Answer:

Gravitational lensing

Explanation:

An astronaut on a strange planet finds that she can jump a maximum horizontal distance of 15m if her initial speed is 3m/s.What is the acceleration due to gravity on the planet?

Answers

Explanation:

As the astronaut jumps and reaches the highest point, he is momentarily at rest, i.e.

[tex]v=0[/tex]

We also know

[tex]u=3, s=15[/tex]

By the formula,

[tex]v^2-u^2=2as[/tex]

where a is the acceleration of objectc due to gravity,

[tex]0^2-3^2=2a(15)[/tex]

[tex]-9=30a[/tex]

[tex]a=-0.3 ms^{-2}[/tex]

where negative sign indicates a downwards acceleration.

what do you mean by MA of a lever is 3 , VR of a lever is 4 and efficiency of a machine is 60%​

Answers

Explanation:V.R of a lever is 3 means effort distance of the lever is 3 times more than the effort distance of the load. ... Efficiency of a lever is 60% means 40% of the energy is wasted due to friction as no machine is Friction less.

Yellow light passes through a diffraction grating. it's first order maximum occurs at an angle of 21.2. What is the slit separation d?

Answers

Answer:

19.284

or

9.33

Explanation:

Answer:

1.66

Explanation:

Found answer on chegg. Works for acellus

An arrow is moving at 35 m/s and travels for 5 seconds. How far did the arrow travel?

What are you solving for? Show work! Help please!

Answers

Answer:

175m

Explanation:

So it’s travelling at 35metres/1second so if we want to find 5 seconds we can do this…

[tex]\frac{35}{1} \frac{x}{5}.... so[/tex] 35x5 ÷ 1 = 175m/5 seconds

Answer:

175 is the right answer 35×5=175

Explanation:

175

how many grams of CaCo3, will react with dil HCL to produce 75gm of Co2 ?​

Answers

Answer:

100g is correct answer.

Answer:

100 grams

Explanation:

CaCO3 ➡️ CaO + CO2

pls mark brainlies!

Other Questions
What are precautions to be taken when doing titrations? A-Make sure to always vigorously shake that flask after every drop if the end point is still unknown. It may be that the remaining volume of the titrant needed to reach the end point is just adhering on the wall. This is to ensure accuracy. B-The amounts of solid and liquid should be weighed and pipetted with high accurac This is because all the data that will be produced will mainly depend on this. C- If the end point is unknown, dropwise addition of the titrant is recommended. D- Always make sure that the indicator is added. E- All of the above Doping Se with P would produce a(n) ________ semiconductor with ____________ conductivity compared to pure Se. Which room is white? All the following process produces hematite exceptA roasting of sideriteB oxidation of ironC oxidation of magnetiteD drying of limoniteE no correct answer If X= 9 and Y = 3, what is XY a person runs at a constant speed of 9.2 miles per hour for 6 minutes and 30 seconds. How far did they travel in yards. If zinc has an atomic number of 30 and a mass number of 65 what is the correct number of protons neutrons and electrons ? Some fast-food restaurants sell only chicken, others sell only tacos and burritos, and still, otherssell only hamburgers. This is an example of the economic concept of:InvestmentElasticityBusiness CyclesSpecialization 2. Which is MOST true about the Great Compromise and the legislative branch? Group of answer choices Small states and large states were to be completely equal Large states had more elected officials than small states, but small states were equal in the Senate Population did not have an impact on state representation; the state's size dictated representation Because the Senate was smaller, it received limited control over legislation What is the answer ? Find the AREA of the shape Why is Macbeth introduced through the witches The area of a square is 100 m. What is its perimeter? 2) Um gs ideal sofre uma determinada transformao, conforme mostra o grfico abaixo. Considereque no processo ABC o gs recebeu 80000 J de calor. Dados: 1 atm = 100000 Pa.a) Determine o trabalho realizado pelo gs.b) Determine a variao da energia interna do gs. When a car drives down a street, what energy conversions are happening?A. The stored energy of the gasoline is converted to the potentialenergy of the car.B. The kinetic energy of the gasoline is converted to heat and thekinetic energy of the car.C. The kinetic energy of the gasoline is converted to heat.D. The potential energy of the gasoline is converted to heat andkinetic energy Find the x and y components of each of the following vectors.hyp = 15 m/stheta = 150x = ?y = ? How does technical education play a vital role to develop the entire nation?pls- dont lie;) Please give this in steps Solve the following equations:1. -301 = -3x = 7(4x 18) In a mathematics class , half of the students scored 84 on an achievement test. With the exception of a few students who scored 50 , the remaining students scored 76. Which of the following statements is true about the distribution of scores ?A. The mean is greater than the mode.B. The mean and the median are the same.C. The mean is less than the median.D. The mean is greater than the median.