Training is a way for employers to provide
to enable employees to protect themselves and others from injuries

Answer:

E = 8.83 kips

Explanation:

First, we determine the stress on the rod:

[tex]\sigma = \frac{F}{A}\\\\[/tex]

where,

σ = stress = ?

F = Force Applied = 1300 lb

A = Cross-sectional Area of rod = 0.5[tex]\pi \frac{d^2}{4} = \pi \frac{(0.5\ in)^2}{4} = 0.1963\ in^2[/tex]

Therefore,

[tex]\sigma = \frac{1300\ lb}{0.1963\ in^2} \\\\\sigma = 6.62\ kips[/tex]

Now, we determine the strain:

[tex]strain = \epsilon = \frac{elongation}{original\ length} \\\\\epsilon = \frac{0.009\ in}{12\ in}\\\\\epsilon = 7.5\ x\ 10^{-4}[/tex]

Now, the modulus of elasticity (E) is given as:

[tex]E = \frac{\sigma}{\epsilon}\\\\E = \frac{6.62\ kips}{7.5\ x\ 10^{-4}}[/tex]

E = 8.83 kips

Answer:

The term "green" describes initiatives and products that preserve the environment

Explanation:

In order to preserve the environment the Environmental Protection Agency has provides tips for "Being Green on the Road", which highlights the topics including, Green Vehicle Guides, guides for Fuel Economy, guides for Clean Diesel and many more ways our environmental footprint can be reduced

A green economy is an economy that focuses on the reduction of risk of economic activity on the environment, such as the reduction of carbon emission and reduction in environmental pollution, biodiversity loss prevention, and promotes a sustainable development

A green tech aims to protect the environment and to reverse previous damage done to the environment, including technology for clean energy, water purification, and waste recycling.

Answer:

The correct answer is stressor. The durability of building products and structures is affected by stressors such as rain, heat, snow, and hurricanes. Construction standards consider these potential stressors.

Answer:

true

Explanation:

Answer:

[tex]F_r = 200N[/tex]

Explanation:

Given

Let the two forces be

[tex]F_1 = 130N[/tex]

[tex]F_2 = 110N[/tex]

and

[tex]\tan(\theta) = \frac{12}{5}[/tex]

Required

Determine the resultant force

Resultant force (Fr) is calculated using:

[tex]F_r^2 = F_1^2 + F_2^2 + 2F_1F_2\cos(\theta)[/tex]

This means that we need to first calculate [tex]\cos(\theta)[/tex]

Given that:

[tex]\tan(\theta) = \frac{12}{5}[/tex]

In trigonometry:

[tex]\tan(\theta) = \frac{Opposite}{Adjacent}[/tex]

By comparing the above formula to [tex]\tan(\theta) = \frac{12}{5}[/tex]

[tex]Opposite = 12[/tex]

[tex]Adjacent = 5[/tex]

The hypotenuse is calculated as thus:

[tex]Hypotenuse^2 = Opposite^2 + Adjacent^2[/tex]

[tex]Hypotenuse^2 = 12^2 + 5^2[/tex]

[tex]Hypotenuse^2 = 144 + 25[/tex]

[tex]Hypotenuse^2 = 169[/tex]

[tex]Hypotenuse = \sqrt{169[/tex]

[tex]Hypotenuse = 13[/tex]

[tex]\cos(\theta)[/tex] is then calculated using:

[tex]\cos(\theta)= \frac{Adjacent}{Hypotenuse}[/tex]

[tex]\cos(\theta)= \frac{5}{13}[/tex]

Substitute values for [tex]F_1[/tex], [tex]F_2[/tex] and [tex]cos(\theta)[/tex] in

[tex]F_r^2 = F_1^2 + F_2^2 + 2F_1F_2\cos(\theta)[/tex]

[tex]F_r^2 = 130^2 + 110^2 + 2*130*110*\frac{5}{13}[/tex]

[tex]F_r^2 = 16900 + 12100 + 11000[/tex]

[tex]F_r^2 = 40000[/tex]

Take square roots of both sides

[tex]F_r = \sqrt{40000[/tex]

[tex]F_r = 200N[/tex]

Hence, the resultant force is 200N

Answer:

Talcum powder!

Explanation:

How to find the source of an oil leak:

This method simply involves using Talcum Powder as a visual aid to help pinpoint the location of an oil leak,

so you use Talcum powder for small oil leak :]

Have a wonderful day!

Answer:

hydraulics

Explanation:

Answer:

b

Explanation:

Answer:

C. UNDP or World Bank.

Explanation:

Suppose the country of Bangladesh wants a low interest loan to invest in the building of infrastructure. The international organizations which Bangladesh would most likely turn to are UNDP or World Bank.

Answer: C) Both Techs A and B

Explanation:

Technician A and Technician B are both very right. Using a spray bottle and water, the ignition wire test can be carried out using any of the methods described above. Or, by using a grounded test lead that is connected to a multimeter, you can also conduct the test for faulty ignition wires.

Answer: Either A or B

Explanation:

Answer:

9A

Explanation:

Answer:

4. Compromise

Explanation:

A compromise is when the two disagreeing parties give up something to make a conclusion that both are satisfied with. In this case, Anthony wants Angel to have a good time, so he gives up his bowling.

Answer:

The correct option is;

D. Irrigation systems have been installed

Explanation:

The quality of capital measures the amount of capital available within an economy and the benefit derivable from the capital

Quality of capital is improved by advances in technology which are the outcomes of research and development. With technological advancement, a unit of capital can enable a unit of labor to increase the amount of goods produced

The difference between a farm which uses manual labor to water the plants and a farm which uses an irrigation system is that the farm that uses manual watering techniques has a lower quality of capital per worker than the farm that has an irrigation system, which is a positive investment.

Answer:

a) 600°F  days

b) 103°F  days

Explanation:

Given data :

overall heat loss coefficient = 400 Btu/h.oF

Furnace efficiency = 0.78

applying the degree- day method the heating energy requirement per day can be obtained by subtracting the average temperature for a particular day from the acceptable mid/balance point temperature

lets assume the mid/balance point temperature = 65°F

a) heating energy requirement in Denver Colorado

 we will have 600°F days  ; considering the  the average temperature - balance point temperature

= 665 - 65 = 600°F

b) heating energy requirement in Little Rock Arkansas

 we will have 103°  days

Answer:

2D CAD Software Application

Explanation:

Two Dimensional Computer-Aided Design Software Application is otherwise known as 2D CAD software application such as AutoCAD or MicroStation is used to change physical objects and 3-D ideas into a 2-D drawing that effectively describe the design and features of an object, so the object can be documented and manufactured.

The utilization of a 2D CAD software application saves time and revision to construction drawings can quickly be made without having to redesign the whole drawings from the scratch.

Answer:

339.4625

Explanation:

correct me if i am wrong

Explanation:

Okay soo-

Given-

u = 60 km/hr = 60×1000/3600=50/3 m/s

t = 20 s

s = 250 m

a = ?

v = ?

Solution -

Here, acceleration is uniform.

(a) According to 2nd kinematics equation,

s = ut + ½at^2

250 = 50/3 ×20 + 0.5×a×20×20

250-1000/3=200a

(750-1000)/3=200a

a = -250/(3×200)

a = -5/12

a = 0.4167 m/s^2

The required uniform acceleration of the car is 0.4167 m/s^2.

(b) According to 1st kinematics equation

v = u + at

v = 50/3 + (-5/12)×20

v = 50/3-25/3

v = 25/3

v = 8.33 m/s

The speed of the car as it passes the traffic light is 8.33 m/s.

Good luck!

This question is incomplete, the complete question is;

For some transformation having kinetics that obey the Avrami equation, the parameter n is known to have a value of 2. If, after 100 s, the reaction is 40% complete, how long (total time in seconds) will it take the transformation to go to 95% completion

y = 1 - exp( -ktⁿ )

Answer: the time required for 95% transformation is 242.17 s

Explanation:

First, we calculate the value of k which is the dependent variable in Avrami equation

y = 1 - exp( -ktⁿ )

exp( -ktⁿ ) = 1 - y

-ktⁿ = In( 1 - y )

k = - In( 1 - y ) / tⁿ

now given that; n = 2, y = 40% = 0.40, and t = 100 s

we substitute

k = - In( 1 - 0.40 ) / 100²

k = - In(0.60) / 10000

k = 0.5108 / 10000

k = 0.00005108 ≈ 5.108 × 10⁻⁵

Now calculate the time required for 95% transformation

tⁿ = - In( 1 - y ) / k

t = [- In( 1 - y ) / k ]^1/n

n = 2, y = 95% = 0.95 and k = 5.108 × 10⁻⁵

we substitute our values

t = [- In( 1 - 0.95 ) / 5.108 × 10⁻⁵ ]^1/2

t = [2.9957 / 5.108 × 10⁻⁵]^1/2

t = [ 58647.22 ]^1/2

t = 242.17 s

Therefore the time required for 95% transformation is 242.17 s

Answer: To show his father what he had done

Explanation:

Percy Jackson is the son of the great Greek god of the seas, Poseidon. He did not however, know this for a long time. After he finds out, his life becomes more exciting as he embarks on many adventures.

According to Grover who is his best friend and guardian, Percy sent Medusa's head to Mount Olympus to show his father what he had done so that Poseidon would acknowledge and be proud of him.

Answer: power required to maintain level flight=82.20hp

Explanation:

Given

Area = 200 ft^2

Weight = 2000 lb

Cl( Lift coefficient)= 0.39

Cd( Drag coefficient) = 0.06  

The density ρ of air at standard atmospheric  pressure = 2.38 X 10^-3 slugs/ft^3

For Equilibrium to be maintained during flight conditions, the lift force must be balanced by the weight of the aircraft such that

Lift force  = Weight of aircraft

(1/2)ρAU²Cl= W

1/2X 2.38 X 10^-3 X 200 X U² X 0.39 = 2000

U²= 2000 X 2 / 2.38 X 10^-3 X 200 X 0.39

U=[tex]\sqrt{21,547.08}[/tex]

Velocity, U= 146.7892ft/s

Drag force of the velocity can be deduced from the formulae

Cd= Drag force(D) /1/2 ρU²A

Drag force=1/2 ρU²ACd

D=1/2 x (2.38 X 10^-3 slugs/ft^3) x (146.7892ft/s)² x 200 ft^2 x 0.06

D=307.69

Drag force= 308lb

power required to maintain level flight is given as

P = Drag force x Velocity = D x U

=308lb X  146.7892ft/s

=45,211.0736lb.ft/s

Changing to hp we have that

1 Horsepower, hp = 550 ft lbf/s

??=45,211.0736lb.ft/s

45,211.0736lb.ft/s/ 550 ft lbf/s= 82.20hp

Answer:

The correct option is;

c.  the exergy of the tank can be anything between zero to P₀·V

Explanation:

The given parameters are;

The volume of the tank = V

The pressure in the tank = 0 Pascal

The pressure of the surrounding = P₀

The temperature of the surrounding = T₀

Exergy is a measure of the amount of a given energy which a system posses that is extractable to provide useful work. It is possible work that brings about equilibrium. It is the potential the system has to bring about change

The exergy balance equation  is given as follows;

[tex]X_2 - X_1 = \int\limits^2_1 {} \, \delta Q \left (1 - \dfrac{T_0}{T} \right ) - [W - P_0 \cdot (V_2 - V_1)]- X_{destroyed}[/tex]

Where;

X₂ - X₁ is the difference between the two exergies

Therefore, the exergy of the system with regards to the environment is the work received from the environment which at is equal to done on the system by the surrounding which by equilibrium for an empty tank with 0 pressure is equal to the product of the pressure of the surrounding and the volume of the empty tank or P₀ × V less the work, exergy destroyed, while taking into consideration the change in heat of the system

Therefore, the exergy of the tank can be anything between zero to P₀·V.

Answer:

Compressibility.

Explanation:

The compressibility of a fluid can be defined as a measure of the change in volume (density) with respect to the amount of pressure applied to the fluid. Thus, as the pressure of a compressible fluid increases, both its viscosity and density increases.

Some examples of compressible fluids are vapors, gases, air etc.

Hence, compressibility is the property that describes the amount of volume that decreases when pressure is applied to a fluid.

Additionally, the compressibility of fluids plays a significant role in the field of science such as in aerodynamics, fluid mechanics, thermodynamics etc.

Answer:

compressiblity

Explanation:

Answer:

3 industries that often need the skills of mechanical engineers are:

The key skills mechanical engineers bring to these industries are effective technical skills, the ability to work under pressure, problem-solving skills, creativity and teamwork.

Explanation:

Automotive industry: The skills mechanical engineers bring to automotive industry include designing new cars for development, conducting laboratory testing for performance safety, and troubleshooting design or manufacturing issues with recalled vehicles. Automotive engineers have:

Construction industry: Mechanical engineers are responsible for designing, building, establishing, and maintaining all kinds of mechanical machinery, tools, and components in the construction industry.

Aerospace industry: Mechanical engineers in aerospace industry produce specifications for design, development, manufacture and installing of new or modified mechanical components or systems. They design more fuel-efficient aircraft that cut emissions and build the fleets of satellites that power modern GPS technology.

Answer:

41 kW

690.2 kW

Explanation:

Given the following data

T1 = 400 K

P1 = 350 kPa

T2 = 600 K

P2 = 100 kPq

m = 1 kg/s

Q1 = 900 kW

Q2 = 50 kW

T(amb1) = 1000 K

T(amb2) = 350 K

T(amb3) = 500 K

We also will be using tables to solve the question.

R = 0.287 kJ/kgk

C(p) = 1.004 kJ/kgk

To find Q3, we'd use the formula

Q3 = m.T(amb3).[C(p).In(T2/T1) - R.In(P2/P1)] - [T(amb3)/T(amb1) * Q1] + [T(amb3)/T(amb2) * Q2]

Q3 = 1 * 500 * [1.004 * In(600/400) - 0.287 * In(100/450)] - 500/1000 * 900 + 500/350 * 50

After simplification, we find that

Q3 = 41 kW

Next, we use the equation

Q3 - Q2 + Q1 = W + m.C(p).(T2 - T1)

41 - 50 + 900 = W + 1 * 1.004 * (600 - 400)

891 = W + 1.004 * 200

891 = W + 200.8

W = 891 - 200.8

W = 690.2 kW

If we make W the subject of the formula, we have

Answer:

Each wattmeter measures a line-to-line voltage between two of the three power supply lines. In this configuration, the total power, watts is accurately measured by the algebraic sum of the two wattmeter values. Pt = P1 + P2. This holds true if the system is balanced or unbalanced.

Solution :

i. Slip plane (1 1 0)

Slip direction -- [1 1 1]

Applied stress direction = ( 1 0 0 ]

τ = 50 MPa    ( Here slip direction must be perpendicular to slip plane)

τ = σ cos Φ cos λ

[tex]$\cos \phi = \frac{(1,0,0) \cdot (1,1,0)}{1 \times \sqrt2}$[/tex]

       [tex]$=\frac{1}{\sqrt2 }$[/tex]

[tex]$\cos \lambda = \frac{(1,0,0) \cdot (1,-1,1)}{1 \times \sqrt3}$[/tex]

       [tex]$=\frac{1}{\sqrt3 }$[/tex]

  τ = σ cos Φ cos λ

∴ [tex]$50= \sigma \times \frac{1}{\sqrt2} \times \frac{1}{\sqrt3} $[/tex]

  σ = 122.47 MPa

ii. Slip plane  --- (1 1 0)

   Slip direction -- [1 1 1]

  [tex]$\cos \phi = \frac{(1, 0, 0) \cdot (1, -1, 0)}{1 \times \sqrt2} =\frac{1}{\sqrt2}$[/tex]

   [tex]$\cos \lambda = \frac{(1, 0, 0) \cdot (1, 1, -1)}{1 \times \sqrt3} =\frac{1}{\sqrt3}$[/tex]

 τ = σ cos Φ cos λ

∴ [tex]$50= \sigma \times \frac{1}{\sqrt2} \times \frac{1}{\sqrt3} $[/tex]

  σ = 122.47 MPa

iii. Slip plane  --- (1 0 1)

    Slip direction --- [1 1 1]

[tex]$\cos \phi = \frac{(1, 0, 0) \cdot (1, 0, 1)}{1 \times \sqrt2} =\frac{1}{\sqrt2}$[/tex]

   [tex]$\cos \lambda = \frac{(1, 0, 0) \cdot (1, 1, -1)}{1 \times \sqrt3} =\frac{1}{\sqrt3}$[/tex]

τ = σ cos Φ cos λ

∴ [tex]$50= \sigma \times \frac{1}{\sqrt2} \times \frac{1}{\sqrt3} $[/tex]

  σ = 122.47 MPa

iv. Slip plane -- (1 0 1)

    Slip direction  ---- [1 1 1]

[tex]$\cos \phi = \frac{(1, 0, 0) \cdot (1, 0, -1)}{1 \times \sqrt2}=\frac{1}{\sqrt2}$[/tex]

[tex]$\cos \lambda = \frac{(1, 0, 0) \cdot (1, -1, 1)}{1 \times \sqrt3} =\frac{1}{\sqrt3}$[/tex]

τ = σ cos Φ cos λ

∴ [tex]$50= \sigma \times \frac{1}{\sqrt2} \times \frac{1}{\sqrt3} $[/tex]

  σ = 122.47 MPa

∴ (1, 0, -1). (1, -1, 1) = 1 + 0 - 1 = 0

Answer:

linear partial differential

Explanation:

The Schrödinger equation is a linear partial differential equation that describes the wave function or state function of a quantum-mechanical system. It is a key result in quantum mechanics, and its discovery was a significant landmark in the development of the subject.

Answer:

The correct option is;

Terminate

Explanation:

Termination of the risk is equivalent to elimination of the risk by avoiding the activity that brings about the risk or by using a different process that does not include the risk observed in the previous process option

When the reward far outweigh the risk, it may be decided to terminate or eliminate the risk and miss the reward and also terminate the likelihood of the losses to be incurred.

Answer:

the answer is scientifically science chemistry biochemistry aerospace engineering plato english history world ap history yes

Explanation:

que