Answer:
A
Explanation:
infer means use data to reach conclusion.
Compute the equilibrium constant at 25 ∘C for the reaction between Sn2+(aq) and Cd(s), which form Sn(s) and Cd2+(aq). Express your answer using two significant figures
Answer:
6.1×10^8
Explanation:
The reaction is;
Sn^2+(aq) + Cd(s) -----> Sn(s) + Cd^2+(aq)
E°cell = E°cathode - E°anode
E°cathode= -0.14 V
E°anode= -0.40 V
E°cell = -0.14-(-0.40)
E°cell= -0.14+0.40
E°cell= 0.26 V
But
E°cell= 0.0592/n log K
E°cell= 0.0592/2 log K
0.26= 0.0296log K
log K = 0.26/0.0296
log K= 8.7838
K= Antilog (8.7838)
K= 6.1×10^8
Solid MgO has the same crystal structure as NaCl. How many oxide ions surround each Mg * ion as nearest neighbors in MgO? 4 none of these
Answer:
The number of oxide ions as the nearest neighbors of [tex]{\rm{M}}{{\rm{g}}^{{\rm{2 + }}}}[/tex] ions are known to be as six
Explanation:
The regularity of a crystal structure leads to the idea of space lattice.In order to explain this concept, let us consider a crystal of NaCl, It consists of a perfectly regular arrangement of sodium ions and chlorine ions.
If we represent the position of each Na+ in the crystal by a point marked x the result will be a regular three dimensional network of points. This will be the space lattice of Na+ in the crystal NaCl. The symmetry of the combined lattice determined the symmetry of the crystal as a whole.
The space lattice of a crystal may be considered as built up of a three dimensional basic pattern called unit cell. The unit cell is a repeat unit which generates the whole pattern in three dimensions of the unit cell.
In Solid MgO , the crystal structure which is used to predict the properties of the material, have the same structure as that of NaCl.
The obtain the structure of a face centered cubic FCC unit cell where the ions occupy the corner of the cube and the center of each face of the cube.
The number of oxide ions as the nearest neighbors of [tex]{\rm{M}}{{\rm{g}}^{{\rm{2 + }}}}[/tex] ions are known to be as six. As a result of that , the coordination number of [tex]{\rm{M}}{{\rm{g}}^{{\rm{2 + }}}}[/tex] ions is six.
Which nonmetal is extremely nonreactive, refusing to bond with other elements except under very unusual conditions created in the laboratory?
Answer:
Helium
Explanation:
Though all noble gases are stable, helium only has two electrons and one shell so it basically doesn't have room for others.
Given that Ag-107 (51.839% abundance) and the mass ratio: Ag-109/Ag-107=1.0187.
Calculate the mass of Ag-107. (Atomic mass of Ag = 107.87 amu)
Answer:
Atomic mass of Ag-107 = 106.94 amu
Explanation:
Let the mass of Ag-107 be y
Since the mass ratio of Ag-109/Ag-107 is 1.0187, the mass of Ag-109 is 1.0187 times heavier than the mass of Ag-107
Mass of Ag-109 = 1.0187y
Relative atomic mass of Ag = sum of (mass of each isotope * abundance)
Relative atomic mass of Ag = 107.87
Abundance of Ag-107 = 51.839% = 0.51839
Abundance of Ag-109 = 41.161% = 0.48161
107.87 = (y * 0.51839) + (1.018y * 0.48161)
107.87 = 0.51838y + 0.49027898y
107.87 = 1.00865898y
y = 107.87/1.00865898
y = 106.94 amu
Therefore, atomic mass of Ag-107 = 106.94 amu
Which statement describes global winds?
They flow from the same direction.
They travel over short distances.
They generate land breezes.
They blow away from the poles to the equator.
Idk the answer
Answer:
They blow away from poles to the equator.
Explanation:
Hello,
In this case, we must take into account that global wind systems are formed by the constant increase in the temperature of the Earth’s surface. Thus, they drive the oceans’ surface currents. In such a way, we can say wind is the basic movement of air from an area of higher pressure to an area of lower pressure, for that reason they blow away from the poles to the equator.
Best regards.
The statement that describes the global winds is they travel over short distances.
What is winds?
Wind is a pattern or type of the movement of the natural air or any other composition of gases over to the relative position of the planet's surface.
Global winds are those winds which can travel in a straight path and originated due to global convention currents. Global winds always move from west to east direction and travels short distances only.
Hence, option (2) is correct.
To know more about global winds, visit the below link:
https://brainly.com/question/1319281
Use the References to access important values if needed for this question.
For the following reaction, 3.83 grams of hydrogen gas are allowed to react with 9.60 grams of
ethylene (C2H4).
hydrogen(g) + ethylene (C2H4)(g) ethane (C2H)(g)
What is the maximum mass of ethane (C2H6) that can be formed?
grams
What is the FORMULA for the limiting reagent?
What mass of the excess reagent remains after the reaction is complete?
grams
Submit Answer
Retry Entire Group
9 more group attempts remaining
Answer:
A. 10.29 g of C2H6.
B. C2H4.
C. 3.14 g of H2.
Explanation:
Step 1:
We'll begin by writing the balanced equation for the reaction. This is given below:
C2H4 + H2 —> C2H6
Step 2:
Determination of the masses of C2H4 and H2 that reacted and the mass of C2H6 produced from the balanced equation.
This is illustrated below:
Molar mass of C2H4 = (12x2) + (4x1) =28 g/mol
Mass of C2H4 from the balanced equation = 1 x 28 = 28 g.
Molar mass of H2 = 2x1 = 2 g/mol
Mass of H2 from the balanced equation = 1 x 2 = 2 g.
Molar mass of C2H6 = (12x2) + (6x1) = 30 g/mol.
Mass of C2H6 from the balanced equation = 1 x 30 = 30 g
From the balanced equation above,
28 g of C2H4 reacted with 2 g of H2 to produce 30 g of C2H6.
Step 3:
Determination of the limiting reactant. This can be obtained as follow:
From the balanced equation above,
28 g of C2H4 reacted with 2 g of H2.
Therefore, 9.6 g of C2H4 will react with = (9.6 x 2)/28 = 0.69 g of H2.
From the calculations made above, we can see that only 0.69 g out of 3.83 g of H2 given is needed to react completely with 9.6 g of C2H4.
Therefore, C2H4 is the limiting reactant and H2 is the excess reactant.
A. Determination of the maximum mass of ethane, C2H6 produced from the react.
In this case, the limiting reactant will be used because it will produce the maximum yield of the reaction since all of it is consumed in the reaction.
The limiting reactant is C2H4 and the maximum mass of C2H6 can be obtained as follow:
From the balanced equation above,
28 g of C2H4 reacted to produce 30 g of C2H6.
Therefore, 9.6 gof C2H4 will react to produce = (9.6 x 30)/28 = 10.29 g of C2H6.
Therefore, 10.29 g of ethane, C2H6 were produced from the reaction.
B. The limiting reactant is ethylene with formula C2H4. Please refer to step 3 above for details.
C . Determination of the mass of the excess reactant that remained after the reaction.
The excess reactant is H2, please refer to step 3 above for details and the mass that remained after the reaction can be obtained as follow:
Mass of H2 given = 3.83 g
Mass of H2 that reacted = 0.69 g
Mass of H2 remaining =.?
Mass of H2 remaining = mass of H2 given – mass of H2 that reacted.
Mass of H2 remaining = 3.83 – 0.69
Mass of H2 remaining = 3.14 g
Therefore, 3.14 g of H2 remained after the reaction.
10. What effect does temperature have on molecular motion? Using this explanation, explain why both pressure and volume can decrease with decreasing temperature.
Answer:
If the temperature increases the molecular movement as well, and if it increases the same it will happen with the molecular movement.
Pressure, volume and temperature are three factors that are closely related since they increase the temperature, the pressure usually decreases due to the dispersion of the molecules that can be generated, so the volume also increases.
If the temperature drops, the material becomes denser, its molecules do not collide with each other, their volume and pressure increases.
Explanation:
The pressure is related to the molecular density and the movement that these molecules have.
The movement is regulated by temperature, since if it increases, the friction and collision of the molecules also.
On the other hand, the higher the volume, the less pressure there will be on the molecules, since they are more dispersed among themselves.
(in the opposite case that the volume decreases, the pressure increases)
What is the name of the molecule below?
A) 2-pentene
B) pentane
C) 2-pentyne
D) 2-pentane
The name of the molecule which is given below is 2-pentene.
What are alkene?Alkenes are the organic compounds which are composed of carbon and hydrogen atoms, in which double bond is present.
In the given diagram:
Each corner and joints shows the carbon atoms and number of carbon atoms in it is 5.One double bond is present in the 2nd position.So the compound is 2 pentene.
Hence, 2 pentene is the name of the compound.
To know more about alkene, visit the below link:
https://brainly.com/question/6041165
#SPJ2
How many moles of KOH are required to produce 4.79 g K3PO4 according to the following reaction? 3KOH + H3PO4 -----> K3PO4 + 3H2O
Answer:
0.677 moles
Explanation:
Take the atomic mass of K = 39.1, O =16.0, P = 31.0
no. of moles = mass / molar mass
no. of moles of K3PO4 used = 4.79 / (39.1x3 + 31 + 16x4)
= 0.02256 mol
From the equation, the mole ratio of KOH : K3PO4 = 3 :1,
meaning every 3 moles of KOH used, produces 1 mole of K3PO4.
So, using this ratio, let the no. of moles of KOH required to be y.
[tex]\frac{3}{1} =\frac{y}{0.02256} \\[/tex]
y = 0.02256 x3
y = 0.0677 mol
If you don't find exactly 0.677 moles as one of the options, go for the closest one. A very slight error may occur because of taking different significant figures of atomic masses when calculating.
Sodium oxide has the chemical formula Na2O. What is the oxidation number of oxygen in this compound? Provide your answer below: ___
Answer: The oxidation number of oxygen in this compound is -2.
Explanation:
For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.
In [tex]Na_2O[/tex], sodium is having an oxidation state of +1 called as [tex]Na^+[/tex] cation and oxygen is an anion with oxidation state of -2. Thus they combine and their oxidation states are exchanged and written in simplest whole number ratios to give neutral [tex]Na_2O[/tex]
The cations and anions being oppositely charged attract each other through strong coloumbic forces and form an ionic bond.
Answer:
Sodium Oxide: Na2O, Barium Phosphide: Ba3P2
Explanation:
Just did the question
Which of the following best describes hydrocarbons? a. Alkanes in which a hydrogen atom is replaced by a hydroxyl group b. Binary compounds of carbon and hydrogen c. Organic compounds containing water and carbon d. Covalently bonded carbon compounds which have intermolecular force attractions to hydrogen compounds e. Compounds which are formed by the reaction of a naturally occurring carbon-containing substance and water
Answer:
b. Binary compounds of carbon and hydrogen
Explanation:
Before proceeding, Hydrocarbons refers to organic chemical compounds composed exclusively of hydrogen and carbon atoms. This means the only elements present in an hydrocarbon are;
- Carbon
- Hydrogen
Looking through the options;
- Option A: This is wrong because the hydroxyl group contains oxygen and hydrocarbons contain only hydrogen and carbon.
- option B: This is correct. Binary compounds refers to compounds with just two elements.
- option C: This is wrong because water contains oxygen and hydrocarbons contain only hydrogen and carbon.
- option D: Carbon atoms can contain other elements so this option is wrong.
- option E: This also wrong because we had already gotten the correct option.
A saturated solution was formed when 5.16×10−2 L of argon, at a pressure of 1.0 atm and temperature of 25 ∘C, was dissolved in 1.0 L of water.
Calculate the Henry's law constant for argon. it must be im M/atm
Answer:
The Henry's law constant for argon is [tex]k=2.11*10^{-3}\frac{ M}{atm}[/tex]
Explanation:
Henry's Law indicates that the solubility of a gas in a liquid at a certain temperature is proportional to the partial pressure of the gas on the liquid.
C = k*P
where C is the solubility, P the partial pressure and k is the Henry constant.
So, being the concentration [tex]C=\frac{ngas}{V}[/tex]
where ngas is the number of moles of gas and V is the volume of the solution, you must calculate the number of moles ngas. This is determined by the Ideal Gas Law: P*V=n*R*T where P is the gas pressure, V is the volume that occupies, T is its temperature, R is the ideal gas constant, and n is the number of moles of the gas. So [tex]n=\frac{P*V}{R*T}[/tex]
In this case:
P=PAr= 1 atmV=VAr= 5.16*10⁻² LR=0.082 [tex]\frac{atm*L}{mol*K}[/tex]T=25 °C=298 °KThen:
[tex]n=\frac{1 atm*5.16*10^{-2} L}{0.082 \frac{atm*L}{mol*K} *298K}[/tex]
Solving:
n= 2.11 *10⁻³ moles
So: [tex]C=\frac{ngas}{V}=\frac{2.11*10^{-3} moles}{1 L} =2.11*10^{-3} \frac{moles}{L}= 2.11*10^{-3} M[/tex]
Using Henry's Law and being C=CAr and P =PAr:
2.11*10⁻³ M= k* 1 atm
Solving:
[tex]k=\frac{2.11*10^{-3} M}{1 atm}[/tex]
You get:
[tex]k=2.11*10^{-3}\frac{ M}{atm}[/tex]
The Henry's law constant for argon is [tex]k=2.11*10^{-3}\frac{ M}{atm}[/tex]
The Henry's law constant for argon gas in 1 litre of water is 2.1 × 10⁻³M/atm.
What is Henry's law?Henry's law of gas states that solubility of a gas in any liquid at particular temperature is directly proportional to the partial pressure of the gas.
C∝P
C = kP, where
k = Henry's constant
P = partial pressure of gas
C is the solubility and it is present in the form of concentration and will be calculated as:
C = n/V
n = no. of moles
V = volume
And moles of the gas will be calculated by using the ideal gas equation as:
PV = nRT
n = (1)(5.16×10⁻²) / (0.082)(298) = 2.1 × 10⁻³ moles
And Concentration in liquid will be:
C = 2.1 × 10⁻³mol / 1L = 2.1 × 10⁻³ M
Now we put all these values in the first equation to calculate the value of k as:
k = (2.1 × 10⁻³M) / (1atm) = 2.1 × 10⁻³M/atm
Hence required value of k is 2.1 × 10⁻³M/atm.
To know more about Henry's law, viist the below link:
https://brainly.com/question/12823901
What's the electron configuration of a Ca+2 ion?
A. [Kr]
B. [Ar]
C. [Ne]
D. [He]
Answer:
B
Explanation:
The Ca+2 ion means that 2 electrons have been given away. So when you try and find the answer, you have to count backwards from Calcium. When you do, you get K+ first and then Argon which is either column 8 orc column 18 depending on your periodic table.
The element you hit is Argon.
The answer is B
Answer:
B ar
Explanation:
pen foster answer
which material is a conductor of electric current?
Answer:Conduction materials include metals, electrolytes, superconductors, semiconductors, plasmas and some nonmetallic conductors such as graphite and Conductive polymers. Copper has a high conductivity.
Explanation:
Name the physical properties used in seperating kerosene and petrol
simple distillation can be used when the temperature difference between the boiling points of two miscible liquid is at least 25°c. the temperature difference between the boiling points of kerosene and petrol is 25c. hence, this mixture can separated using simple distillation.
answer:simple distillation
Which correctly lists the three land uses that the Bureau of Land Management was originally created to manage? mining, recreation, wildlife refuges recreation, developing oil and gas, battlefields grazing, mining, developing oil and gas developing oil and gas, battlefields, wildlife refuges
Answer: C
Explanation:
Right on edge 2020
The Bureau of Land Management was originally created to manage land for grazing, mining, developing oil and gas.
What is land management?Land management refers to the activities which are done in order to protect and preserve the land as well the resources found on land.
The Bureau of Land Management was created to manage land in the US.
The Bureau of Land Management was originally created to manage land for grazing, mining, developing oil and gas.
Learn more about land management at: https://brainly.com/question/784519
For each of the following names, write down the correct formula.
i. Silicon tetrafluoride
ii. Disulfur decafluoride
iii. Sulfur trioxide
iv. Diphosphorus pentoxide
v. Dichlorine oxide
Explanation:
I hope it helps you
good luck
Answer for the question
For the following equilibrium, if the concentration of phosphate ion is X, what will be the molar solubility of copper phosphate? Cu3(PO4)2(s)↽−−⇀3Cu2+(aq)+2PO3−4(aq)
Answer: The molar solubility of copper phosphate is [tex]\frac{X}{2}[/tex]
Explanation:
Solubility product is defined as the equilibrium constant in which a solid ionic compound is dissolved to produce its ions in solution. It is represented as [tex]K_{sp}[/tex]
The equation is given as:
[tex]Cu_3(PO_4)_2(s)\rightarrow 3Cu^{2+}(aq)+2PO_4^{3-}[/tex]
By stoichiometry of the reaction:
1 mole of [tex]Cu_3(PO_4)_2[/tex] gives 3 moles of [tex]Cu^{2+}[/tex] and 2 moles of [tex]PO_4^{3-}[/tex]
When the solubility of [tex]Cu_3(PO_4)_2[/tex] is S moles/liter, then the solubility of [tex]Cu^{2+}[/tex] will be 3S moles\liter and solubility of [tex]PO_4^{3-}[/tex] will be 2S moles/liter.
Molar concentration of [tex]PO_4^{3-}[/tex] = X
Given : 2S = X
Thus S =[tex]\frac{X}{2}[/tex]
Thus the molar solubility of copper phosphate is [tex]\frac{X}{2}[/tex]
It is known that the kinetics of recrystallization for some alloy obey the Avrami equation andthat the value of n in the exponential is 2.5. If, at some temperature, the fraction recrystallized is0.40 after 200 min, determine the rate of recrystallization at this temperature.
Answer:
rate of recrystallization = 4.99 × 10⁻³ min⁻¹
Explanation:
For Avrami equation:
[tex]y = 1-e ^{(-kt^n)} \\ \\ e^{(-kt^n)} = 1-y\\ \\ -kt^n = In(1-y) \\ \\ k = \dfrac{-In(1-y)}{t^n}[/tex]
To calculate the value of k which is a dependent variable for the above equation ; we have:
[tex]k = \dfrac{-In(1-0.40)}{200^{2.5}}[/tex]
[tex]k = 9.030 \times 10 ^{-7}[/tex]
The time needed for 50% transformation can be determined as follows:
[tex]y = 1-e ^{(-kt^n)} \\ \\ e^{(-kt^n)} = 1-y\\ \\ -kt^n = In(1-y) \\ \\ t =[ \dfrac{-In(1-y)}{k}]^{^{1/n}}[/tex]
[tex]t_{0.5} =[ \dfrac{-In(1-0.4)}{9.030 \times 10^{-7}}]^{^{1/2.5}}[/tex]
= 200.00183 min
The rate of reaction for Avrami equation is:
[tex]rate = \dfrac{1}{t_{0.5}}[/tex]
[tex]rate = \dfrac{1}{200.00183}[/tex]
rate = 0.00499 / min
rate of recrystallization = 4.99 × 10⁻³ min⁻¹
consider the following reaction
N2 + 3H2=2NH3
if 30 dm3 of each reactant react together then the volume of mixture at the end is
a 10 dm3
b 20 dm3
c 30 dm3
d 40 dm3
Answer:
d, 40 dm3.
Explanation:
According to Avogadro's law, the mole ratio of chemicals in a reaction is equal to the ratio of volumes of chemicals reacted (for gas).
From the equation, the mole ratio of N2 : H2 : NH3 = 1 : 3 : 2, meaning 1 mole of N2 reacts completely with 3 moles of H2 to give 2 moles of NH3, the ratio of volume required is also equal to 1 : 3 : 2.
Considering both N2 and H2 have 30dm3 of volume, but 1 mole of N2 reacts completely with 3 moles of H2, so we can see H2 is limiting while N2 is in excess. Using the ratio, we can deduce that 10dm3 equals to 1 in ratio (because 3 moles ratio = 30dm3).
With that being said, all H2 has reacted, meaning there's no volume of H2 left. 2 moles of NH3 is produced, meaning the volume of NH3 produced = 10 x 2 = 20 dm3. (using the ratio again)
1 mole of N2 has reacted, meaning from the 30dm3, only 10 dm3 has reacted. This also indicate that 20 dm3 of N2 has not been reacted.
So at the end, the mixture contains 20dm3 of NH3, and 20 dm3 of unreacted N2. Hence, the answer is d, 40 dm3.
Suppose you titrate 25.00 mL of 0.200 M KOBr with 0.200M H2SO4. The pH at half-equivalence point is 7.75 a). What is the initial pH of the 25.00mL of 0.200M KOBr mentioned above
Answer:
Approximately [tex]10.88[/tex].
Explanation:
Equilibrium constant[tex]\rm OBr^{-}[/tex] can act as a weak Bronsted-Lowry base:
[tex]\rm OBr^{-}\; (aq) + H_2O\; (l) \rightleftharpoons HOBr\; (l) + OH^{-}\; (aq)[/tex].
(Side note: the state symbol of [tex]\rm HOBr[/tex] in this equation is [tex]\rm (l)[/tex] (meaning liquid) because [tex]\rm HOBr[/tex] is a weak acid.)
However, the equilibrium constant of this reaction, [tex]K_\text{eq}[/tex], isn't directly given. The idea is to find [tex]K_\text{eq}[/tex] using the [tex]\rm pH[/tex] value at the half-equivalence point. Keep in mind that this system is at equilibrium all the time during the titration. If temperature stays the same, then the same [tex]K_\text{eq}[/tex] value could also be used to find the [tex]\rm pH[/tex] of the solution before the acid was added.
At equilibrium:
[tex]\displaystyle K_\text{eq} = \frac{[\rm HOBr\; (l)]\cdot [\rm OH^{-}\; (aq)]}{[\rm OBr^{-}\; (aq)]}[/tex].
At the half-equivalence point of this titration, exactly half of the base, [tex]\rm OBr^{-}[/tex], has been converted to its conjugate acid, [tex]\rm HOBr[/tex]. Therefore, the half-equivalence concentration of [tex]\rm OBr^{-}[/tex] and [tex]\rm HOBr[/tex] should both be equal to one-half the initial concentration of [tex]\rm OBr^{-}[/tex].
As a result, the half-equivalence concentration of [tex]\rm OBr^{-}[/tex] and [tex]\rm HOBr[/tex] should be the same. The expression for [tex]K_\text{eq}[/tex] can thus be simplified:
[tex]\begin{aligned}& K_\text{eq} \\&= \frac{\left(\text{half-equivalence $[\rm HOBr\; (l)]$}\right)\cdot \left(\text{half-equivalence $[\rm OH^{-}\; (aq)]$}\right)}{\text{half-equivalence $[\rm OBr^{-}\; (l)]$}}\\ &=\text{half-equivalence $[\rm OH^{-}\; (aq)]$}\end{aligned}[/tex].
In other words, the [tex]K_\text{eq}[/tex] of this system is equal to the [tex]\rm OH^{-}[/tex] concentration at the half-equivalence point. Assume that [tex]\rm p\mathnormal{K}_\text{w}[/tex] the self-ionization constant of water, is [tex]14[/tex]. The concentration of [tex]\rm OH^{-}[/tex] can be found from the [tex]\rm pH[/tex] value:
[tex]\begin{aligned}& \text{half-equivalence $[\rm OH^{-}\; (aq)]$} \\ &= 10^{\rm pH - p\mathnormal{K}_\text{w}}\;\rm mol \cdot L^{-1} \\ &= 10^{7.75 - 14}\; \rm mol \cdot L^{-1}\\ &= 10^{-6.25}\; \rm mol \cdot L^{-1}\end{aligned}[/tex].
Therefore, [tex]\begin{aligned} K_\text{eq} &= 10^{-6.25}\end{aligned}[/tex].
Initial pH of the solutionAgain, since [tex]\rm KOBr[/tex] is a soluble salt, all that [tex]0.200\; \rm M[/tex] of [tex]\rm KOBr[/tex] in this solution will be in the form of [tex]\rm K^{+}[/tex] and [tex]\rm OBr^{-}[/tex] ions. Before any hydrolysis takes place, the concentration of [tex]\rm OBr^{-}[/tex] should be equal to that of [tex]\rm KOBr[/tex]. Therefore:
[tex]\text{$[\rm OBr^{-}\; (aq)]$ before hydrolysis} = 0.200\; \rm M[/tex].
Let the equilibrium concentration of [tex][\rm OH^{-}\; (aq)][/tex] be [tex]x\; \rm M[/tex]. Create a RICE table for this reversible reaction:
[tex]\begin{array}{c|ccccccc} & \rm OBr^{-}\; (aq) &+&\rm H_2O\; (l)& \rightleftharpoons & \rm HOBr\; (l)& + & \rm OH^{-}\; (aq) \\ \textbf{I}& 0.200\; \rm M & & & & 0 \; \rm M & & 0\; \rm M \\ \textbf{C} & -x\; \rm M & & & & +x \; \rm M & & +x\; \rm M \\ \textbf{E}& (0.200 + x)\; \rm M & & & & x \; \rm M & & x\; \rm M \end{array}[/tex].
Assume that external factors (such as temperature) stays the same. The [tex]K_\text{eq}[/tex] found at the half-equivalence point should apply here, as well.
[tex]\displaystyle K_\text{eq} = \frac{[\rm HOBr\; (l)]\cdot [\rm OH^{-}\; (aq)]}{[\rm OBr^{-}\; (aq)]}[/tex].
At equilibrium:
[tex]\displaystyle \frac{[\rm HOBr\; (l)]\cdot [\rm OH^{-}\; (aq)]}{[\rm OBr^{-}\; (aq)]} = \frac{x^2}{0.200 + x}[/tex].
Assume that [tex]x[/tex] is much smaller than [tex]0.200[/tex], such that the denominator is approximately the same as [tex]0.200[/tex]:
[tex]\displaystyle \frac{[\rm HOBr\; (l)]\cdot [\rm OH^{-}\; (aq)]}{[\rm OBr^{-}\; (aq)]} = \frac{x^2}{0.200 + x} \approx \frac{x^2}{0.200}[/tex].
That should be equal to the equilibrium constant, [tex]K_\text{eq}[/tex]. In other words:
[tex]\displaystyle \frac{x^2}{0.200} \approx K_\text{eq} = 10^{-6.25}[/tex].
Solve for [tex]x[/tex]:
[tex]x \approx 3.35\times 10^{-4}[/tex].
In other words, the [tex]\rm OH^{-}[/tex] before acid was added was approximately [tex]3.35\times 10^{-4}\; \rm M[/tex], which is the same as [tex]3.35\times 10^{-4}\; \rm mol \cdot L^{-1}[/tex]. Again, assume that [tex]\rm p\mathnormal{K}_\text{w} = 14[/tex]. Calculate the [tex]\rm pH[/tex] of that solution:
[tex]\begin{aligned}\rm pH &= \rm p\mathnormal{K}_\text{w} + \log [\mathrm{OH^{-}}] \approx 10.88\end{aligned}[/tex].
(Rounded to two decimal places.)
What is the magnetic quantum number value for an element with n = 1?
Answer:
0,
Explanation:
if n was 2, then 1,0,-1
Choose the incorrect statement A. Replacing 3 of the H of LiALH4 with OR groups make it a more reactive reducing agents than NaBH4. B. Ester functional group has a higher priority than aldehyde in nomenclature. C. Ketones are more reactive than esters. D. Aldehydes are less reactive than acyl halides. E. Reactions of aldehydes with (1) NaBH4 and (2) H3O+ form primary alcohols.
Answer:
Replacing 3 of the H of LiALH4 with OR groups make it a more reactive reducing agents than NaBH4
Explanation:
LiAlH4 and NaBH4 are two well known reducing agents in organic chemistry. These two reducing agents function by transfer of hydrogen to the substrate.
If the hydrogen atoms in LiAlH4 are replaced by the -OR moiety, the new compound will be far less reducing than NaBH4 because the hydrogen atoms necessary to effect the reduction has been removed. Thus, the new compound containing -OR moiety can never be more reducing than NaBH4. This implies that the statement written in the answer is false as written.
If the average rate of the reaction A --->2B C is 1M/s, what is the average rate of formation (in M/s) of B over that same period of time
Answer:
[tex]r_B=2M/s[/tex]
Explanation:
Hello,
In this case, since the average rate of reaction is related with the consumption of A which has an stoichiometric coefficient of 1, the rate of formation of B will be:
[tex]r_B=2*1M/s\\\\r_B=2M/s[/tex]
By cause of the stoichiometric coefficient of B which doubles the average rate.
Best regards.
Which is a nonpolar molecule?
Answer:
Explanation:
A nonpolar molecule has no separation of charge, so no positive or negative poles are formed. In other words, the electrical charges of nonpolar molecules are evenly distributed across the molecule. Nonpolar molecules tend to dissolve well in nonpolar solvents, which are frequently organic solvents. The answer is hydrogen cyanide.
Ag+(aq)+2NH3(aq)⇌Ag(NH3)2+(aq) : A g + ( a q ) + 2 N H 3 ( a q ) ⇌ A g ( N H 3 ) 2 + ( a q ) : blank is the Lewis acid and blank is the Lewis base. is the Lewis acid and A g + ( a q ) + 2 N H 3 ( a q ) ⇌ A g ( N H 3 ) 2 + ( a q ) : blank is the Lewis acid and blank is the Lewis base. is the Lewis base.
Answer:
Silver ion - Lewis acid, Ammonia - Lewis base
Explanation:
The reaction is given as;
Ag+(aq) + 2NH3(aq) ⇌ [Ag(NH3)]2+(aq)
A lewis acid is an electron pair acceptor. While a lewis base is any substance that that can donate a pair of nonbonding electrons.
This reaction however is a complexation reaction, where ammonia is reacting with the silver ion.
Silver ion accepts electrons in this reaction, hence it is the lewis acid. The ammonia on the other hand donates the electrons used in bonding so it is the lewis base.
Through what basic mechanism is 2-methylcyclohexanol converted to 1-bromo-1-methylcyclohexane when treated with HBr
Answer:
Sn1 mechanism reaction
Explanation:
In this case, we have to start with the protonation of the "OH" group by the attack of the lone pairs in the alcohol group to the "H" in the HBr producing a positive charge in the oxygen. Then, water is produced and a carbocation is generated. This carbocation can be stabilized by a hydride shift. We can move a hydrogen atom to the positive charge and we will obtain a tertiary carbocation. Finally, the [tex]Br^- [/tex] will attack to produce the final halide.
See figure 1.
I hope it helps!
A student accidentally let some of the vapor escape the beaker. As a result of this error, will the mass of naphthalene you record be too high, too low, or unaffected? Why?
Answer:
too low
Explanation:
If our aim is to recover the naphthalene and measure its mass after separation, then we must not allow any vapour to escape.
Naphthalene is a sublime substance, it can be separated by sublimation. It changes directly from solid to gas. This vapour must be kept securely so that none of it escapes. If part of the naphthalene vapour happens to escape accidentally, then the measured mass of naphthalene will be too low compared to the mass of naphthalene originally present in the mixture.
An aqueous solution containing 5.06 g of lead(II) nitrate is added to an aqueous solution containing 6.03 g of potassium chloride.Enter the balanced chemical equation for this reaction. Be sure to include all physical states.balanced chemical equation:What is the limiting reactant?lead(II) nitratepotassium chlorideThe percent yield for the reaction is 82.9% . How many grams of the precipitate are formed?precipitate formed:gHow many grams of the excess reactant remain?excess reactant remaining:
Answer:
Pb(NO3)2(aq) + 2KCl(aq) ------> 2KNO3(aq) + PbCl2(s)
3.52 g of PbCl2
3.76 g of KCl
Explanation:
The equation of the reaction is;
Pb(NO3)2(aq) + 2KCl(aq) ------> 2KNO3(aq) + PbCl2(s)
Number of moles of Pb(NO3)2 =mass/molar mass 5.06g/331.2 g/mol = 0.0153 moles
Number of moles of KCl= mass/ molar mass= 6.03g/74.5513 g/mol= 0.081 moles
Next we obtain the limiting reactant; the limiting reactant yields the least number of moles of products.
For Pb(NO3)2;
1 mole of Pb(NO3)2 yields 1 mole of PbCl2
Therefore 0.0153 moles of Pb(NO3)2 yields 0.0153 moles of PbCl2
For KCl;
2 moles of KCl yields 1 mole of PbCl2
0.081 moles of KCl yields 0.081 moles ×1/2 = 0.041 moles of PbCl2
Therefore Pb(NO3)2 is the limiting reactant.
Theoretical Mass of precipitate obtained = 0.0153 moles of PbCl2 × 278.1 g/mol = 4.25 g of PbCl2
% yield = actual yield/theoretical yield ×100
Actual yield = % yield × theoretical yield /100
Actual yield= 82.9 ×4.25/100
Actual yield = 3.52 g of PbCl2
If 1 mole of Pb(NO3) reacts with 2 moles of KCl
0.0153 moles of Pb(NO3)2 reacts with 0.0153 moles × 2 = 0.0306 moles of KCl
Amount of excess KCl= 0.081 moles - 0.0306 moles = 0.0504 moles of KCl
Mass of excess KCl = 0.0504 moles of KCl × 74.5513 g/mol = 3.76 g of KCl
If a gas is initially at a pressure of nine ATM and a volume at 21 L at a temperature of 253K and the pressure is raise to 15 ATM and the temperature is raised to 302K what will be the resulting volume of the gas
Answer:
15.0L
Explanation:
p/v = constan
(9*21)/253 =(15v)/ 302
v = (9*21*302)/(15*253)
v=15.0