This mathematical model describes the changes that occur in a sample of
water as its temperature increases. Use this model to predict what will
happen to the motion of the molecules in a sample of water that is being
heated from 50° to 100°C.
200°C
vaporization
150°C
melting
100°C
Temperature (°C)
water vapor
50°C
liquid water
0°C-
--50°C
10
20
ice
30
Time (min)
40
50
60
70
O A. The motion will change very little.
O B. The molecules will stop moving.
O C. The movement of the molecules will gradually decrease.
O D. The movement of the molecules will gradually increase.

Answer:

*if a hydrogen emission line is observed in the galaxy, this implies that the galaxy has a significant amount of a chemical element

*difference between the two wavelengths e can be explained by the relativistic Doppler effect

Explanation:

The emission of the materials depends on the distribution of the electrons around the atoms and their possible transitions. These emissions are maintained even when the element is mixed in some compound.

Consequently, if a hydrogen emission line is observed in the galaxy, this implies that the galaxy has a significant amount of a chemical element.

The small difference between the two wavelengths e can be explained by the relativistic Doppler effect, due to the movement of the galaxy

Answer:

50.176m ; 31.36m/s ; 31.36m/s

Explanation:

Given the following :

Time (t) = 3.2s

Height(s) of the building

The initial velocity (u) will be 0

Using the equation:

S = ut + 0.5at^2

Acceleration due to gravity (a) = g = +9.8m/s^2 (downward)

S = 0*t + 0.5(9.8)(3.2^2)

S = 0 + 50.176

S = 50.176m

B.) speed impact when it touches the ground:

v^2 = u^2 + 2aS

where v is the final Velocity

v^2 = 0^2 + 2(9.8)(50.176)

v^2 = 0 + 983.4496

v = √983.4496

v = 31.36m/s

C) Speed of throw from the ground to reach the top of the building

Here we need the initial velocity

Height (s) = 50.176m

Acceleration due to gravity g = a = - 9.8m/s ( upward)

Using the third equation of motion:

S = ut + 0.5at^2

50.176 = u*3.2 + 0.5(-9.8)(3.2^2)

50.176 = 3.2u - 50.176

50.176 + 50.176 = 3.2u

100.352 = 3.2u

u = 100.352 / 3.2

u = 31.36m/s

Answer:

a)  v = 2.21 10⁷ m / s, b)  B = 6.04 10⁻⁴ T , c)  f = 1.69 10⁷ Hz , d)     T = 5.9 10⁻⁸ s

Explanation:

a) For this exercise, let's start by using the concept of kinetic energy

           K = ½ m v²

           v = √ 2K / m

Let's reduce the magnitudes to SI units

          E = K = 1.39 kev (1000 eV / 1 keV) (1.6 10⁻¹⁹ J / 1 eV) = 2,224 10⁻¹⁶ J

          r = 20.8 cm (1 m / 100 cm) = 0.208 m

let's calculate

          v = √ (2 2,224 10⁻¹⁶ / 9.1 10⁻³¹)

          v = √ (4.8879 10¹⁴)

          v = 2.21 10⁷ m / s

b) let's use Newton's second law where the force is magnetic

              F = m a

where the acceleration is centripetal

              a = v² / r

the magnetic force is

              Fm = q v x B = q v B sin θ

since the circle is perpendicular to the magnetic field, the angle is 90º and the sine is equal to one, let's substitute

          qv B = m v² / r

          B = m v / rq

let's calculate

          B = 9.1 10⁻³¹ 2.21 10⁷ / (0.208  1.6 10⁻¹⁹)

          B = 6.04 10⁻⁴ T

c) Linear and angular variables are related

          v = w r

          w = v / r

          w = 2.21 10⁷ / 0.208

          w = 1.0625 10⁸ ras / s

    angular velocity and frequency are related

          w = 2π f

          f = w / 2π

          f = 1.0625 10⁸ / (2π)

          f = 1.69 10⁷ Hz

d) the frequency is the inverse of the period

          f = 1 / T

          T = 1 / 1.69 10⁷

           T = 5.9 10⁻⁸ s

(b) Always act on the different bodies in opposite directions

Answer:

b) Always act on the different bodies in opposite directions

Explanation:

b) Always act on the different bodies in opposite directions

For example:

If I am sitting on a sofa and I exert 370N and the sofa will exert -370N force. If the sofa doesn't exert force back, I won't be able to sit which means it will break.

Hope it helps ;) ❤❤❤

[tex]\mathfrak{\huge{\pink{\underline{\underline{AnSwEr:-}}}}}[/tex]

Actually Welcome to the Concept of the Treatment.

Basically according to the theory, GAMMA rays are used to treat the cancer.

c.) GAMMA RADIATIONS

Answer:

Technician B only is correct

Explanation:

The gear ratio is the ratio of the output speed to the input speed such that an overdrive gear ratio of more than 1:1, having more speed per speed of engine rotation RPM

Overdrive ratios conditions is one where the vehicle wheels and speed is faster at a given engine rotation, such that there is fuel efficiency is increased as the engine rotation is low for a given speed and distance of travel.

Answer:

0.66c

Explanation:

Use length contraction equation:

L = L₀ √(1 − (v²/c²))

where L is the contracted length,

L₀ is the length at 0 velocity,

v is the velocity,

and c is the speed of light.

900 = 1200 √(1 − (v²/c²))

3/4 = √(1 − (v²/c²))

9/16 = 1 − (v²/c²)

v²/c² = 7/16

v = ¼√7 c

v ≈ 0.66 c

Answer:

Explanation:

Load ( L ) = 500 N

Effort ( E ) = 200 N

Load distance ( LD ) = 3 m

Effort distance ( ED ) = ?

Now, Let's find the Effort distance ( ED )

We know that,

Output work = Input work

i.e L × LD = E × ED

plug the values

[tex]500 \times 3 = 200 \times ED[/tex]

multiply the numbers

[tex]1500 = 200 \times ED[/tex]

Swipe the sides of the equation

[tex]200 \: ED \: = 500[/tex]

Divide both sides of the equation by 200

[tex] \frac{200 \: ED}{200} = \frac{500}{200} [/tex]

Calculate

[tex]ED\: = 2.5 \: m[/tex]

Hope this helps..

best regards!!

Answer:

A. 119kg

B.0.53m from head

Explanation:

A. Weight = 730+340.

=1170N

F= Wg

W = 1170/9.8

= 119kg

If x is distance from head to CG then 1.92–x is the other distance.

Moments must equal

470x = 330(1.89–x)

470x = 623.7 – 330x

1170x = 623.7

x = 0.53m from head

Answer:

it is used because

They are also less likely to jam due to rust in the screw thread.

Hydraulic jacks are often used to lift elevators in low and medium rise buildings.

A hydraulic jack uses a liquid that is forced into a cylinder by a pump plunger.

Answer:

No

Explanation:

lambda represent wavelength

Lambda is a letter in the Greek alphabet. You need it to spell many words in Greek. Also, if you like, you can use it as a variable in an algebraic expression, or as a name for your cat, or to represent a physical or chemical quantity.

The quantity you use it to represent may or may not have dimensions or units of measurement.

Answer:

conduction

Explanation:

conduction is the movement of heat from one point to another on a metal.

Hope it helps.

Answer:

175 m

Explanation:

Given:

y = 220 m

v₀ = 30 m/s

v = 0 m/s

a = -10 m/s²

Find: y₀

v² = v₀² + 2a (y − y₀)

(0 m/s)² = (30 m/s)² + 2 (-10 m/s²) (220 m − y₀)

y₀ = 175 m

Answer:

He should aim it at the monkey

Explanation:

The question is related to projectile motion of an arrow from a bow such that the arrow is able to reach a specific target

Therefore, since the monkey is going to drop from the tree the instant the person launches the food, then for the monkey to be able reach the food, we have;

Final level position of the launched food should be ≥ The level of the monkey

As the monkey is dropping from the tree the destination of the launched food should be at the monkey so that before the food gets to the position where the monkey was when launching the food with the arrow, the monkey will be slightly lower so as to be able to catch the food or return up the tree to get the food rather than the food falling to the ground.

Answer:

Explanation:

The range of mercury thermometer is - 37°C to 356°C . At temperature below - 37°C , mercury starts converting into solid so this thermometer becomes non-  functional . Hence to measure temperature of - 50°C , alcohol thermometer is suitable . The range of alcohol thermometer is - 112° C to 78°C .  

Answer:

Explanation:

Astronauts must wear spacesuits whenever they leave a spacecraft and are exposed to the environment of space. In space, there is no air to breath and no air pressure... Spacesuits are specially designed to protect astronauts from the cold, radiation and low pressure in space. They also provide air to breathe.

Answer:

True

Explanation:

Newtons Law states that "When a net force acts on a body, it produces acceleration in the body in the direction of the net force. The magnitude of acceleration is directly proportional to the net force and inversely proportional to its mass."

So, it's mathematical form is

=> a ∝ F     (1)

=> a ∝ [tex]\frac{1}{m}[/tex]

Combining the proportionality

=> a ∝ [tex]\frac{F}{m}[/tex]

=> F ∝ ma

Using k as proportionality constant.

=> F = kma

Here k = 1

=> F = ma (Proved)

I think any pendulum would swing slower on the moon than it would on Earth.

The time it takes a pendulum to go through a complete back and forth swing is:

Time period = 2 π √(length/gravity)

You can see that 'gravity' is in the denominator of the fraction, so the smaller gravity gets, the longer the period gets.

To be a little bit more technical, the period is inversely proportional to the square root of gravity.

So the period for a complete swing on the moon would be  √(9.8/1.6) times as long as the complete swing of the same pendulum on Earth.

That number is roughly 2.47 .

So, for every 1 second that a pendulum takes to swing back and forth once on Earth, the same pendulum would take 2.47 seconds to do it on the moon.

Answer:

based on my opinion....

as we know that gravity in moon are less than gravity in earth.. since the force of gravity is less on the moon, the pendulum would swing slower at the same length, angle

and the frequency would be less.

I hope this helps

Explanation:

In case the resistors are in series

R =R1 + R2

R = 40 ohm + 40 ohm

R = 80 ohm

In case the resistors are in parallel

R = 1/R1 + 1/R2

R = 1/40 + 1/40

R = 2/40 ohm

R = 1/20 ohm or R = 0.05 ohm

dont forget to mark brainliest

Answer:

dtwtwerEtbWt

Explanation:

bwtrbtWbTW4TBW4tbW4T4t

Answer:

The total frictional force equals 60 N

Explanation:

We know that F - f = ma where F is the applied force, f is the frictional force, m the mass of the object and a its acceleration.

Now, since the cart moves with constant velocity, its acceleration is zero. So, a = 0.

So F - f = ma

F - f = m(0) = 0

F - f = 0

So, F = f

From the above, we see that the frictional force equals the applied force which is equal to 60 N.

So, f the total frictional force equals 60 N

Explanation:

Because of air pressure

Answer:

The package will be directly below the location of the plane.

Explanation:

Look up projectile motion for more information. The horizontal speed of the package is separate from the vertical speed of the package. The vertical speed of the falling package will be based on the rate of acceleration and the height of the package when dropped. The horizontal speed of the package will be the same as the plane so the package will remain directly below the plane the entire time until the package hits the ground.

The horizontal location of the package with respect to the plane will be parallel to the plane if no air resistance act on it. The pack will be straight to down because of the gravity.

Gravitational force is the force by which an object attracts other objects into its center of mass. Earth attracts every objects in its surface towards its center that's why we are all standing on the ground.

The gravitational force acting on a body is dependent on its mass and height. From an  object falling from a height will experience a positive acceleration downwards to the ground.

If any air resistance is present there, the path of motion of the falling object from the height might be changed randomly. Here, the package is falling from plane without any air resistance and it will be straight down to the plane.

To find more on gravitational force, refer here:

https://brainly.com/question/12528243

#SPJ5

Answer:

900 cm/s or 9 m/s.

Explanation:

Data obtained from the question include the following:

Length (L) = 30 cm

frequency (f) = 60 Hz

Velocity (v) =.?

Next, we shall determine the wavelength (λ).

This is illustrated below:

Since the wave have 4 node, the wavelength of the wave will be:

λ = 2L/4

Length (L) = 30 cm

wavelength (λ) =.?

λ = 2L/4

λ = 2×30/4

λ = 60/4

λ = 15 cm

Therefore, the wavelength (λ) is 15 cm

Now, we can obtain the speed of the wave as follow:

wavelength (λ) = 15 cm

frequency (f) = 60 Hz

Velocity (v) =.?

v = λf

v = 15 × 60

v = 900 cm/s

Thus, converting 900 cm/s to m/s

We have:

100 cm/s = 1 m/s

900 cm/s = 900/100 = 9 m/s

Therefore, the speed of the wave is 900 cm/s or 9 m/s.

Answer:

a) -1.25 m/s²

b) 62.5 m

Explanation:

Convert km/h to m/s:

45 km/h × (1000 m/km) × (1 h / 3600 s) = 12.5 m/s

a = Δv / Δt

a = (0 m/s − 12.5 m/s) / 10 s

a = -1.25 m/s²

Δx = ½ (v + v₀) t

Δx = ½ (0 m/s + 12.5 m/s) (10 s)

Δx = 62.5 m

Answer:

particles

Explanation:

Explanation:

Boyles law is the pressure of a fixed mass of gas which is inversely proportional to its volume provided that the temperature is kept constant.

Answer:

2000 cm³

Explanation:

Assuming the pressure is constant:

V / T = V / T

1000 cm³ / 300 K = V / 600 K

V = 2000 cm³

Explanation:

F=m(v-u)/t

F=2N

m=2kg

t=2s

2=2(v-u)/2

cross multiply

2*2=2(v-u)

4=2(v-u)

4/2=v-u

v-u=2m/s

v-u is the change is velocity.

The change in velocity of the body in 2 sec is 2m/s

According to Newton's second law which states that the change in momentum of an object is directly proportional to the applied force.

Mathematically:

[tex]F \ \alpha \ (\dfrac{v-u}{t} )[/tex]

[tex]F = m (\dfrac{v-u}{t} )[/tex]

where:

m is the mass

(v - u) is the change in velocity

t is the time

F is the applied force

Given the following:

mass m = 2kg

time t = 2secs

Force F = 2N

Required

Change in velocity (v-u)

Substitute the given parameters into the expression shown above:

[tex]2=2(\dfrac{v-u}{2})\\ 2 \times 2=2(v-u)\\4=2(v-u)\\v-u=\dfrac{4}{2}\\v-u=2m/s\\[/tex]

Hence the change in velocity of the body in 2 sec is 2m/s.

Learn more here: https://brainly.com/question/3232705

Answer:

200 Watts.

Explanation:

Power is defines as the amount of work expended per unit time. Mathematically, it is expressed as Power = Workdone/Time

Given parameters

Energy used up 100Joules

Distance moved by brick = 1 meters

Time taken by the machine = 0.5 secs

Power can also be written as Energy/Time

Required

We need to calculate the amount of power used up.

Power = 100J/0.5s

Power = 100/(1/2)

Power = 100 * 2/1

Power = 200Watts.

This shows that the machine would expend 200Watts of power

Answer: 0.0180701 s

Explanation:

Given the following :

Length of string (L) = 10 m

Weight of string (W) = 0.32 N

Weight attached to lower end = 1kN = 1×10^3

Using the relation:

Time (t) = √ (weight of string * Length) / weight attached to lower end * acceleration due to gravity

g = acceleration due to gravity = 9.8m/s^2

Weight of string = 0.32N

Time(t) = √ (0.32 * 10) / [(1*10^3) * (9.8)]

Time = √3.2 / 9800

= √0.0003265

= 0.0180701s