The volume of a sample of hydrogen gas was decreased from 10.89 L
to 4.18 L
at constant temperature. If the final pressure exerted by the hydrogen gas sample was 8.95 atm,
what pressure did the hydrogen gas exert before its volume was decreased?

Answer: Oxbow-shaped meanders have two sets of curves: one curving away from the straight path of the river and one curving back. An oxbow lake starts out as a curve, or meander, in a river.

Explanation:

An answer has a pOH of 8.3. True about the solution is that it is basic and has a pH of 5.7.

When one or more solutes are dissolved in a solvent, the result is a homogenous mixture known as a solution. a solvent is a substance that helps a solute dissolve so that a homogenous mixture results. When a substance dissolves in a solvent, it forms a homogenous mixture, which is known as a solute.

A continuous variation in the relative proportions of a number of substances that is homogeneous and can be changed up to the solubility limit. Although the word "solution" is typically used to describe the liquids state of a substance, it is also possible for gases and solids to form solutions.

To know more about Solution visit:

https://brainly.com/question/30665317

#SPJ1

The correct answer is that it is acidic and has a pH of 5.7.

Answer:

velocity

Explanation:

Explanation:

The weight of water vapor can be determined by using the ideal gas law, which relates the pressure, volume, and temperature of a gas to the number of moles of gas present. We can then use the molar mass of water to calculate the weight of the water vapor.

At standard temperature and pressure (STP), the pressure is 1 atm and the temperature is 273.15 K. The ideal gas law is expressed as:

PV = nRT

where P is the pressure in atmospheres, V is the volume in liters, n is the number of moles, R is the gas constant (0.08206 L·atm/mol·K), and T is the temperature in Kelvin.

Rearranging this equation to solve for n, we have:

n = PV/RT

Substituting the values we know, we get:

n = (1 atm)(2.80 L) / (0.08206 L·atm/mol·K)(273.15 K)

n = 0.1082 mol

The molar mass of water is 18.01528 g/mol, so the weight of the water vapor is:

weight = n x molar mass

weight = 0.1082 mol x 18.01528 g/mol

weight = 1.952 g

Therefore, the weight of the water vapor is 1.952 g.

Answer: D.

Explanation:

In an exothermic reaction, the reactants have higher potential energy than the products, and energy is released. In an endothermic reaction, the reactants have lower potential energy than the products, and energy is absorbed. In this case, the statement that best describes the total energy change of the system is D. The reactants have higher potential energy, and energy is absorbed.

I hope this helps. Let me know if you have any other questions!

The approximate charge difference between glutamic acid and a-ketoglutarate at pH 9.5 would be 1. Option E.

At pH 9.5, the protonation state of glutamic acid and a-ketoglutarate can be determined as follows:

Glutamic acid: At pH 9.5, the carboxyl group (-COOH) will be deprotonated, and the amino group (-NH2) will be protonated, giving the species -COO-CH2-CH(NH3+)-COO-.

The side chain carboxyl group (-COOH) can also be deprotonated to a small extent, giving the species -COO-CH2-CH(NH3+)-COO- and -COO-CH2-CH(NH2)-COO-. At this pH, the predominant species will be the first one, since the pKa of the carboxyl group is 2.19, which means that it will be mostly deprotonated at pH 9.5.

a-ketoglutarate: At pH 9.5, both carboxyl groups (-COOH) will be deprotonated, giving the species -COO-CH2-CO-CH2-COO-.

Therefore, the charge difference between glutamic acid and a-ketoglutarate at pH 9.5 can be calculated by subtracting the number of positive charges (protonated amino group) and negative charges (deprotonated carboxyl groups) in a-ketoglutarate from the corresponding charges in glutamic acid:

Glutamic acid: -1 (protonated amino group) - 2 (deprotonated carboxyl groups) = -3

a-ketoglutarate: 0 (no protonated amino group) - 2 (deprotonated carboxyl groups) = -2

Therefore, the charge difference is: -3 - (-2) = -1

More on amino acids can be found here: https://brainly.com/question/15687833

#SPJ1

Answer:

1.63 × 10²⁴ particles

Explanation:

The equation to find the number of particles is:

Number of particles = Number of moles × Avagadro's constant

Number of particles = 2.7 × 6.02 × 10²³

∴ Number of particles = 1.63 × 10²⁴

a. The final concentration of KOH is 0.500 M.

b. The concentration of K+ and OH- ions is 0.500 M.

To solve this problem, we need to use the equation:

M1V1 = M2V2

where M1 is the initial concentration of the solution, V1 is the initial volume of the solution, M2 is the final concentration of the solution, and V2 is the final volume of the solution.

a) To find the concentration of each solute, we need to first determine the final volume of the solution:

Final volume = 50.0 mL + 25.0 mL = 75.0 mL

Now we can use the equation above to find the final concentration of KOH:

M1V1 = M2V2

(0.750 M)(50.0 mL) = M2(75.0 mL)

M2 = (0.750 M)(50.0 mL) / (75.0 mL)

M2 = 0.500 M

Therefore, the final concentration of KOH is 0.500 M.

b) To find the concentration of each ion, we need to use the final concentration of KOH and the fact that KOH dissociates into K+ and OH- ions in solution. The concentration of K+ and OH- ions will be the same as the final concentration of KOH:

[ K+ ] = 0.500 M

[ OH- ] = 0.500 M

Therefore, the concentration of K+ and OH- ions is 0.500 M.

Learn more about ionic concentration here https://brainly.com/question/27586088

#SPJ1

Answer:

Tertiary amine

Explanation:

An amine in which the nitrogen atom is directly bonded to three carbons of any hybridization which cannot be carbonyl group carbons.

The total number of calories in snack that has 14 grams of glucose, 4 grams of olive oil, and 3 grams of amino acids is 141calories.

Given the mass of glucose = 14g

The mass of olive oil = 4g

The mass of amino acids = 3g

To calculate the amount of calories in the snack, we first need to look at the calories per gram of each component of the snack:

Glucose: 4 calories per gram

14 grams of glucose x 4 calories per gram = 56 calories

Olive oil: 9 calories per gram

4 grams of olive oil x 9 calories per gram = 36 calories

Amino Acids: 4 calories per gram

3 grams of amino acids x 4 calories per gram = 12 calories

Now that we have the calories per gram for each component, we can add them together to get the total number of calories in the snack:

56 calories from glucose + 36 calories from olive oil + 12 calories from amino acids = 104 calories

Finally, we can add a 10% calorie adjustment for the other components of the snack (such as fat and fiber) to get the total number of calories:

104 calories + 10% (10.4 calories) = 141.4 calories

Therefore, the total number of calories in your snack is 141.

To learn more about amino acids click here https://brainly.com/question/1837143

#SPJ1

Iodide anion's final molarity in the solution is 0.13388 M.

We can utilise the molarity formula, which is [tex]molarity =\frac{ moles of solute}{liters of solution}[/tex], to solve this problem.

First, we need to calculate the moles of iron(II) iodide.

Use the formula to accomplish this. [tex]moles =\frac{ mass}{molar mass}[/tex]. The molar mass of iron(II) iodide is 227.88 g/mol,

so the moles of iron(II) iodide is [tex]\frac{7.64 g }{227.88 g/mol }= 0.03347 moles[/tex]

Now, we can calculate the molarity of iodide anion.[tex]Molarity of iodide anion = \frac{moles of iodide anion}{liters of solution}[/tex].Since each mole of iron(II) iodide contains 1 mole of iodide anion, the moles of iodide anion is 0.03347 moles.

The liters of solution is 0.250 liters, so the molarity of iodide anion is [tex]\frac{0.03347 moles}{0.250 liters }= 0.13388 M.[/tex]

Therefore, the final molarity of iodide anion in the solution is 0.13388 M.

learn more about iodide anion Refer:brainly.com/question/16751517

#SPJ1

Answer:

+ Triple covalent bond (CB) > double CB > single CB in terms of bond strength and energy needed to break the bonds

+ Triple bonds are the most reactive, double bonds are reactive but single bonds are unreactive

+ Single bond > double bond > triple bond in bond length

+ in single bond, 2 electrons are shared
+ in double bond, 4 electrons are shared
+ in triple bond, 6 electrons are shared

The total Mole fraction of oxygen is 0.20 or 20% .

P=n(RTV)=n×const. Only the quantity is affected by the gas's nature in the calculation. Let's assume that we have a mixture of two ideal gases that are present in equal quantities based on this supposition.

The total moles of gas in the combination must first be determined:

Total moles of gas = moles of helium + moles of oxygen

Total moles of gas = 20.00 + 5.00

Total moles of gas = 25.00 moles

Next, we need to calculate the mole fraction of oxygen gas:

Mole fraction of oxygen = moles of oxygen / total moles of gas

Mole fraction of oxygen = 5.00 / 25.00

Mole fraction of oxygen = 0.20 or 20% (rounded to two decimal places)

To know more about Mole fraction visit:-

https://brainly.com/question/29808190

#SPJ1

The oxidation state of the iron ion in the complex [Fe(en)2(NO2)2]NO2 is +1.

What is Oxidation State?

Oxidation state, also known as oxidation number, is a number assigned to an atom in a chemical compound that represents the number of electrons that atom has gained or lost relative to its neutral state.

In other words, oxidation state is a measure of the degree of oxidation of an atom in a molecule or ion. An atom is considered to be oxidized if it loses electrons, and reduced if it gains electrons.

In the given complex [Fe(en)2(NO2)2]NO2, the metal is iron (Fe). To determine the oxidation state of the iron ion in the complex, we can use the oxidation states of the other atoms and the charge of the complex.

The en ligand is ethylenediamine (C2H8N2), which has a neutral charge. The NO2 ligand is nitrite, which has a -1 charge. The overall charge of the complex is -1 due to the NO2^- counterion.

Let x be the oxidation state of the iron ion.

From the ethylenediamine ligands, we have a total charge of +4 (2 x +2).

From the nitrite ligands, we have a total charge of -4 (2 x -1 x 2).

From the complex charge, we have a total charge of -1.

Setting the sum of these charges equal to the charge of the iron ion (x) gives us:

+4 - 4 - 1 = x

Simplifying the equation gives us:

-x = -1

Solving for x gives us:

x = +1

Learn more about Oxidation State from given link

https://brainly.com/question/25551544

#SPJ1

In the given reaction:

zinc carbonate + sulfuric acid = zinc sulfate + carbon dioxide + water

The sulfuric acid was the source of the hydrogen in water. In the process, zinc carbonate (ZnCO3) and sulfuric acid (H2SO4) combine to create zinc sulfate (ZnSO4), carbon dioxide (CO2), and water. (H2O).

The carbon in zinc carbonate is what produces carbon dioxide (CO2). (ZnCO3). Zinc carbonate (ZnCO3) and sulfuric acid (H2SO4) interact during the process to produce zinc sulfate (ZnSO4), carbon dioxide (CO2), and water. (H2O).

The sulfuric solution is where water gets its hydrogen from. A substance called sulfuric acid is made up of the elements of hydrogen, sulfur, and oxygen.

Hydrogen ions (H+), which combine with the hydroxide ions (OH-) from the zinc carbonate to create water, are released into the solution when sulfuric acid reacts with zinc carbonate.

The carbon particle in the zinc carbonate molecule is where the carbon in carbon dioxide originates. Compounds containing zinc, carbon, and oxygen make up zinc carbonate. The carbon atom joins two oxygen atoms from the sulfuric acid during the reaction to create carbon dioxide. (CO2).

learn more about sulfuric acid here

https://brainly.com/question/10220770

#SPJ1

Based on their molecular properties, I would expect that the boiling point of Cl2 would be lower than that of Br2.

The boiling point of a substance is largely determined by the strength of the intermolecular forces between its molecules. In particular, substances with stronger intermolecular forces tend to have higher boiling points.

Both Cl2 and Br2 are halogens and exist as diatomic molecules. However, Br2 has more electrons than Cl2, and as a result, it has more electrons available for intermolecular interactions.

This means that Br2 molecules can form stronger London dispersion forces with each other than Cl2 molecules can. London dispersion forces are the weakest intermolecular force, but they still contribute to the overall strength of intermolecular attractions.

Learn more about boiling point:https://brainly.com/question/2153588

#SPJ1

Answer:

If a negatively charged object is brought near a neutral sphere, the electrons in the neutral sphere will move away from the negatively charged object, causing one side of the sphere to become slightly negative and the other side to become slightly positive.

Explanation:

This is because the negative charge repels the electrons in the neutral sphere, creating an imbalance of charges on the sphere.

Answer:

first molecular mass of cs2= 12+2×32=76amu

no of moles=62.5/76=0.822moles

total no of molecules=6.022×[tex]10^{23}[/tex]×0.822=4.95×[tex]10^{23}[/tex]

total no of atoms ( one carbon disulfide has 3 atoms)=3×4.95×[tex]10^{23}[/tex]=14.85×[tex]10^{23}[/tex] atoms

Explanation:

i hope you find it helpful, have a nice day

In 62.5 g of carbon disulfide (CS2), there are approximately 1.48 x 10^24 total atoms. This is calculated by first finding the number of moles in 62.5 g, then multiplying this by the number of atoms in each mole (Avogadro's number).

To calculate the total atoms in a  62.5 g of carbon disulfide (CS2), you need to first find the molar mass of CS2 which is 76.14 g/mol (12.01 g for C + 2 * 32.06 g for S). Using Avogadro's number (6.02 x 10^23) which represents the number of entities in a mole, we can calculate the number of moles and then the total number of atoms.

First, calculate the number of moles in 62.5 g of CS2: 62.5 g / 76.14 g/mol = 0.820 moles

Second,  calculate the total atoms: 0.820 moles * 3 atoms/mole * 6.02 x 10^23 = 1.48 x 10^24 atoms

https://brainly.com/question/31881632

#SPJ3

Answer:

Steam distillation is a specialized method of distillation used to extract essential oils, aromatic compounds, and other volatile substances from plants or other materials that are sensitive to high temperatures. This technique involves passing steam through the plant material, which vaporizes the volatile compounds, and then condensing the steam and the vaporized compounds into a liquid form.

The steam distillation process is typically carried out in a distillation apparatus, which consists of a boiling flask, a condenser, and a receiver. The plant material is placed in the boiling flask and steam is introduced into the flask from a separate boiler or steam generator. The steam then passes through the plant material, vaporizing the essential oils and other volatile compounds. The steam and the vaporized compounds then pass through the condenser, where they are cooled and condensed into a liquid form, which is collected in the receiver.

Steam distillation is particularly useful for extracting essential oils and aromatic compounds from plant materials that are too delicate to withstand the high temperatures required for traditional distillation techniques. It is commonly used in the production of essential oils for use in perfumes, aromatherapy, and other applications. Additionally, steam distillation is a relatively simple and inexpensive method of extracting volatile compounds from plant materials, making it a popular choice for small-scale producers and hobbyists.

Answer:

The number refers to the number of bonds each of the element makes: Hydrogen makes 1 bond, Oxygen makes 2 bonds, Nitrogen makes 3 bonds and Carbon makes 4 bonds. These four elements are widely used when it comes to drawing Lewis structures at introductory chemistry level.

Explanation:

if it helped you please mark me a brainliest :))

you need to add 1.79 mL of 3.0 M HCl to react with 0.45 g of NaHCO3 and produce the most NaCl.

To determine how much 3.0 M HCl is needed to react with 0.45 g of sodium hydrogen carbonate (NaHCO3) and get the most NaCl, you need to first calculate the number of moles of NaHCO3 that you have:

molar mass of NaHCO3 = 84.01 g/mol

moles of NaHCO3 = mass / molar mass = 0.45 g / 84.01 g/mol = 0.00536 mol

Next, you need to determine the stoichiometry of the reaction between NaHCO3 and HCl. The balanced chemical equation for this reaction is:

NaHCO3 + HCl → NaCl + H2O + CO2

From this equation, you can see that one mole of NaHCO3 reacts with one mole of HCl to produce one mole of NaCl. Therefore, you need 0.00536 moles of HCl to react with 0.00536 moles of NaHCO3.

To calculate the volume of 3.0 M HCl needed to provide 0.00536 moles of HCl, you can use the following equation:

moles of solute = concentration x volume of solution (in liters)

Rearranging this equation to solve for the volume of solution gives:

the volume of solution = moles of solute/concentration

Plugging in the values gives:

volume of solution = 0.00536 mol / 3.0 mol/L = 0.00179 L or 1.79 mL

Therefore, you need to add 1.79 mL of 3.0 M HCl to react with 0.45 g of NaHCO3 and produce the most NaCl.

learn more about sodium hydrogen carbonate here

https://brainly.com/question/14240995

#SPJ1

The theoretical yield of the ammonia that is produced in this reaction is 43.9g.

The mole is commonly used to express the amount of a substance in a chemical reaction or to compare the amount of different substances.

Number of moles of N2

1 mole of N2 occupy 22.4 L

x moles of N2 occupies 29 L

x = 1.29 moles

Number of  moles of H2 is;

14g/ 2 g/mol = 7 moles

Now;

1 mole of N2 reacts with 3 moles of H2

x moles of N2 reacts with 7 moles of H2

x = 2.33 moles

Then N2 is the limiting reactant

If 1 mole of N2 produces 2 moles of NH3

1.29 moles of N2 will produce 1.29 * 2/1

= 2.58 moles

Mass of NH3 = 2.58 moles * 17 g/mol

= 43.9g

Learn more about moles:https://brainly.com/question/26416088

#SPJ1

Fluorescence is a phenomenon where a substance absorbs light at a specific wavelength and then emits light at a longer wavelength. This process occurs when an electron in a molecule or atom absorbs energy, becomes excited, and then returns to its ground state by releasing the absorbed energy as light.

Carbon is a versatile element that forms various allotropes such as graphite, diamond, and fullerenes. In the context of nanotechnology, carbon is used to create nanostructures like carbon nanotubes, graphene, and other related materials.

Carbon nanotubes (CNTs) are cylindrical nanostructures made up of carbon atoms, and they have extraordinary mechanical, electrical, and thermal properties. These properties make CNTs useful in various applications such as electronics, energy storage, and composite materials.

Graphene, another carbon nanostructure, is a single layer of carbon atoms arranged in a hexagonal lattice. It exhibits remarkable electronic, thermal, and mechanical properties. Graphene has potential applications in fields like electronics, sensors, and energy storage.

A nanochemist is a scientist who specializes in studying the synthesis, characterization, and applications of nanomaterials, including carbon-based nanostructures.

In summary, fluorescence is a light emission process that can be observed in certain substances, while carbon nanostructures like carbon nanotubes and graphene are materials with unique properties that have promising applications in nanotechnology.

For more questions on: phenomenon

https://brainly.com/question/23850381

#SPJ11  

The molarity of the bleach solution is 0.0637 M.

To find the molarity (M) of the bleach solution, we first need to calculate the number of moles of NaOCl present in the given mass of bleach. We can use the formula:

moles = mass / molar mass

where the molar mass of NaOCl is 74.44 g/mol.

mass of NaOCl = 9.50 g

molar mass of NaOCl = 74.44 g/mol

moles of NaOCl = 9.50 g / 74.44 g/mol = 0.1274 mol

Next, we need to calculate the volume of the solution in liters, since molarity is defined as the number of moles of solute per liter of solution:

volume of solution = 2,000 ml = 2.000 L

Now we can calculate the molarity of the bleach solution:

Molarity = moles of NaOCl / volume of solution

= 0.1274 mol / 2.000 L

= 0.0637 M

Therefore, the molarity of the bleach solution is 0.0637 M.

learn more about molarity here

https://brainly.com/question/26873446

#SPJ1

b. [tex]C_5N_4H_4O_3[/tex] is the chemical in the equation which acts as a base.

A base that can dissolve in water is referred to as being alkali. These chemicals produce salts when they interact chemically with acids. Red litmus can turn blue when bases are present. Depending on the specific way that the qualities of acidity and basicity are examined, the terms acid and base have been defined in a variety of ways.A base is defined as a compound which is capable of accepting a proton or a hydrogen ion in a chemical reaction.

Chemically, the equation is [tex]C_3N_2H_4+C_5N_4H_4O_3 \rightarrow C_3N_2H_5^+ +C_5N_4H_3O_3^-[/tex]

In this equation, [tex]C_5N_4H_4O_3[/tex] is the compound that is accepting a proton (or hydrogen ion) to form [tex]C_3N_2H_5^{+[/tex] and [tex]C_5N_4H_3O_3^-[/tex]. Therefore, [tex]C_5N_4H_4O_3[/tex] is the base in this equation.

learn more about  hydrogen ion Refer:brainly.com/question/15082545

#SPJ1

If an object is changing directions, it can be moving at a constant speed while yet accelerating.

This is due to the fact that acceleration is a vector number that takes into consideration the speed of an object both in magnitude and direction.

An object's acceleration vector also changes as it changes direction, which causes the object's velocity vector to change.

As a result, even though the item is moving at a constant speed, the change in its velocity vector is causing it to accelerate.

Centripetal acceleration is the term for the type of acceleration that keeps objects moving in a circular motion.

Even though an object's speed is constant while it moves in a circular pattern, it is still accelerating.

This is due to the fact that acceleration is a vector number that takes into consideration the speed of an object both in magnitude and direction.

As an item follows a circular course, its acceleration vector also constantly changes direction along with its velocity vector.

learn more about constant speed here

https://brainly.com/question/2681210

#SPJ1

The heat of reaction for the dissolution of the salt can be obtained to be 335 kJ/mol.

Heat capacity is the amount of heat energy required to raise the temperature of a substance by a certain amount. More specifically, it is defined as the amount of heat energy required to raise the temperature of a substance by one degree Celsius or one Kelvin. The heat capacity is typically measured in units of joules per degree Celsius (J/°C) or joules per Kelvin (J/K).

We know that the heat that is absorbed can be obtained from;

H = mcdT

H = 49.83 g *  37.4 J/˚C * ( 31.4˚C - 25.2˚C)

H = 11.55 kJ

Then we have;

Hrxn = 11.55 kJ/ 0.03450 mol

= 335 kJ/mol

Learn more about heat capacity:https://brainly.com/question/28302909

#SPJ1

Explanation:

That's Nucleus process

Aluminum and chlorine react to generate aluminium chloride, according to a balanced chemical equation: 2Al + 3Cl2 2AlCl3. A quantity of aluminium chloride up to 139.5 g can be produced.

When the limiting reagent is totally transformed into products, the maximum amount of product is produced. Two moles of aluminium chloride are created by a full reaction between three moles of chlorine. Hence, 46.4 g of aluminium chloride is the maximum mass that can be produced.

The amount of aluminium and chlorine in the specified masses can be calculated as follows:

Number of moles of aluminum = 28.0 g / 27 g/mol = 1.04 mol

Number of moles of chlorine = 33.0 g / 35.5 g/mol = 0.93 mol

We may get the theoretical yield of aluminium chloride using the balanced equation: 2Al + 3Cl2 → 2AlCl3

1.04 mol Al × (2 mol AlCl3 / 2 mol Al) × (133.34 g AlCl3 / 1 mol AlCl3) = 139.5 g AlCl3

To know more about aluminium chloride visit:-

https://brainly.com/question/16088530

#SPJ1