The tails of animals can serve many important functions. They are mainly used in balance and locomotion. Many lizards have a fragile, detachable tail that will come off when they are attacked by predators, allowing them to escape.

Why is the presence of a brightly colored, detachable tail an advantage for some lizards?

The Tails Of Animals Can Serve Many Important Functions. They Are Mainly Used In Balance And Locomotion.

Answers

Answer 1

Answer:

The presence of a brightly colored, detachable tail can be advantageous for some lizards because it serves as a distraction or decoy for predators. When a predator attacks, the lizard can quickly detach its tail, which wriggles and continues to move for a short period of time. This sudden movement can divert the predator's attention away from the lizard's body, allowing the lizard to escape.

The bright coloration of the tail can also help to draw the predator's attention towards it, instead of the lizard's body. Bright colors are often used in the animal kingdom as warning signals, indicating that an animal is toxic or dangerous. While the lizard may not necessarily be toxic or dangerous, the bright colors of its tail can create a similar effect, deterring predators from attacking in the first place.

Additionally, the detachable tail can serve as a form of self-defense, allowing the lizard to escape from a predator's grasp. By detaching its tail, the lizard can leave the predator with a distraction while it makes its escape. Over time, the lizard can regrow its tail, allowing it to continue to use this defense mechanism in the future.


Related Questions

What is the molarity of a solution of sodium hydroxide if 36.6 mL is neutralized by 12.7 mL of a 0.108 M phosphoric acid?

*Write a balanced equation and use stoichiometry to solve.

*Round your answer to correct sig figs. Do NOT put units on your answer.

Answers

Explanation:

Refer to pic............

In the reaction between CO and Fe304, the theoretical yield is calculated to be 47.2 g Fe. When a chemistry student carries out the experiment, the actual yield is 42.9 g Fe. Calculate the percentage yield. Round to the nearest whole number and record only your number answer (no % sign).

Answers

Answer: 91

Explanation:

Actual/theoretical X 100  = 42.9/47.2 X 100 = 91

Calculate the radius of a tantalum atom if its crystal structure is a BCC with a density of 16. 6 g/cm3 and its atomic mass is 180. 9 amu. The unit cell volume of a BCC crystal structure is as follows: VC=64∧3/3√3

Answers

The radius of a tantalum atom if its crystal structure is a BCC with a density of 16. 6 g/cm3 and its atomic mass is 180. 9 amu is 1.456 Å.

The radius of a tantalum atom can be calculated using the formula:

r = (3Vc/4πn)[tex]^\frac{1}{3}[/tex]

where Vc is the unit cell volume, n is the number of atoms in the unit cell, and r is the radius of the atom.

For a BCC structure, there are 2 atoms per unit cell, so n = 2. The unit cell volume for a BCC crystal structure is given as:

Vc = (64/3√3)a³

where a is the length of the edge of the cube.

To solve for the radius of the tantalum atom, we need to first calculate the length of the edge of the cube. We can use the density of tantalum to calculate its atomic mass density:

ρ = m/V

where ρ is the density, m is the mass of the unit cell, and V is the volume of the unit cell. For a BCC unit cell, the mass of the unit cell can be calculated as:

m = n × atomic mass

where n is the number of atoms per unit cell and atomic mass is the atomic mass of the element. Substituting the values given, we get:

ρ = m/V = n × atomic mass / Vc

Rearranging the equation and solving for a, we get:

a = (4ρVc/2n×atomic mass)^⁰⁵

Substituting the given values and solving for a, we get:

a = [(4 × 16.6 g/cm³ × (64/3√3)a³) / (2 × 2 × 180.9 g/mol)][tex]^\frac{1}{2}[/tex]

Simplifying the expression, we get:

a = 3.307 Å

Now, we can calculate the radius of the tantalum atom using the formula:

r = (3Vc/4πn)[tex]^\frac{1}{3}[/tex]

Substituting the values we have calculated, we get:

r = [(3 × (64/3√3)a³) / (4π × 2)][tex]^\frac{1}{3}[/tex] = 1.456 Å

Therefore, the radius of a tantalum atom in a BCC crystal structure with a density of 16.6 g/cm3 and an atomic mass of 180.9 amu is approximately 1.456 Å.

Learn more about Tantalum atom:

https://brainly.com/question/11047097

#SPJ4


A water tank of dimension 2m×5m×8m filled to the brim will have maximum pressure of ------ (Relative density of the material of the tank is 1.8 and r.d of water
i will give brainlest​

Answers

Answer:

219600 Pa (or 2.196 bar, or 31.9 psi).

Explanation:

weight of water:

volume of water = 2m x 5m x 8m = 80 cubic meters

weight of water = volume of water x density of water x gravitational acceleration

density of water is 1000 kg/m^3 and the gravitational acceleration is 9.81 m/s^2.

weight of water = 80 x 1000 x 9.81 = 784800 N

weight of the tank

volume of tank = 2m x 5m x 8m = 80 cubic meters

weight of tank = volume of tank x density of tank x gravitational acceleration

relative density of the tank material is 1.8, which means its density is 1.8 times that of water, or 1800 kg/m^3.

weight of tank = 80 x 1800 x 9.81 = 1411200 N

The total weight acting on the bottom of the tank is the sum of the weight of the water and the weight of the tank:

Total weight = weight of water + weight of tank = 2196000 N

The max pressure at the bottom of the tank is the total weight divided by the area of the bottom of the tank:

max pressure = total weight / area of bottom of tank

the area of the bottom of the tank is 2m x 5m = 10 square meters.

Max pressure = 2196000 N / 10 m^2 = 219600 Pa

Therefore, your answer is 219600 Pa (or 2.196 bar, or 31.9 psi)

Hope this helped. Let me know if you need any further explanation.

How do the properties analysed in this activity show periodicity of the chemical elements? For instance, as the ionics radius increases

Answers

The properties analyzed in this activity, such as ionic radius, atomic radius, and electronegativity, show periodicity of the chemical elements

It is because they are repeated in a systematic and predictable fashion as you move across a period in the periodic table. Specifically, as you move across a period, the ionic radius increases from left to right. This occurs because the nucleus of elements to the left of the period is larger and has more protons, while the valence electrons increase from left to right, meaning the elements to the right of the period have more electrons that are farther away from the nucleus.

For more question on electrons click on

https://brainly.com/question/371590

#SPJ11

Calculate the number of moles of NaCl contained in 5L of a 2.2M solution.

Answers

The number of moles of NaCl contained in 5 L of a 2.2 M solution is 11 moles

How do i determine the number of moles?

The molarity of a solution gives a relationship between volume and mole of substance. The mathematical relationship is given below:

Molarity = number of mole / Volume

With the above formula, we can determine the number of mole of NaCl in the solution. Details below:

Volume of solution = 5 LMolarity of solution = 2.2 MNumber of mole of NaCl =?

Molarity = number of mole / Volume

Cross multiply

Number of mole = molarity × volume

Number of mole of NaCl = 2.2 × 5

Number of mole of NaCl = 11 moles

Thus, the number of moles of NaCl is 11 moles

Learn more about number of mole:

https://brainly.com/question/20522500

#SPJ1

What is the condensed formulas and IUPAC name for the following compound:
-ethyl alcohol (in beverages)

Answers

Ethanol (also known as ethanol) has the chemical formula [tex]C_{2} H_{5} OH[/tex] and the chemical formula[tex]CH_{3} CH_{2} OH[/tex].

How does a chemical formula work?

In a chemical formula, each item's smallest quantity, such as a monomer or formula unit, is listed together with the total atoms in that unit. By referring to the names of the constituent parts and a few straightforward rules, we may name simple mixtures given a chemical formula.

The chemical formula: why is that?

The chemical nomenclature of a compound is represented by its chemical formula. It displays the component elements and how many atoms from each element are found in a single complex molecule.

To know more about Chemical Formula visit:

https://brainly.com/question/29031056

#SPJ1

Analyze the given diagram of the carbon cycle below.

Part 1: Which compound does C represent?
Part 2: Name a process that could release this compound into the air.
Part 3: Explain how the elements that form it are conserved during the carbon cycle. Use complete sentences to explain your answer.

Justify how this compound was created from a recycling of carbon in the carbon cycle. Use complete sentences to explain your answer.

Answers

Part 1: C represents the compound carbon dioxide (CO2),  in the given diagram of the question .

Carbon Cycle

Part 2: One process that could release carbon dioxide into the air is combustion, which occurs when organic compounds (such as fossil fuels) react with oxygen in the air to produce carbon dioxide and water. Other processes that can release carbon dioxide include volcanic eruptions, natural decay of organic matter, and respiration by living organisms.

Elements that form it  

Part 3: The elements that form carbon dioxide, namely carbon and oxygen, are conserved during the carbon cycle. This is because carbon is constantly being exchanged between the atmosphere, oceans, and land through processes such as photosynthesis, respiration, and decomposition. When plants undergo photosynthesis, they take in carbon dioxide from the atmosphere and use it to build their biomass, incorporating carbon into their structures. When animals eat plants or other animals, they consume this carbon and release carbon dioxide back into the atmosphere through respiration. When organisms die, their bodies decompose and release carbon back into the environment. In this way, carbon is constantly being recycled through the carbon cycle.

The formation of carbon dioxide from the recycling of carbon occurs during cellular respiration, which is the process by which living organisms break down organic compounds (such as glucose) to release energy. During cellular respiration, carbon-based molecules are oxidized, or combined with oxygen, to produce carbon dioxide as a waste product. This carbon dioxide can then be released back into the atmosphere or taken up by plants through photosynthesis.

To know more about CARBON DIOXIDE (CO2) , visit :

https://brainly.com/question/28151123

#SPJ1

9 mol P4O10 reacts with 51 mol H2O according to the equation below:

P4O10 + 6H2O 4H3PO4
How many moles of H3PO4 form from 9 mol P4O10?

[?} mol H3PO4
Round your answer to the ones place.

Answers

From the balanced chemical equation, we can see that 1 mole of P4O10 reacts to form 4 moles of H3PO4. Therefore, we need to find the number of moles of P4O10 to calculate the number of moles of H3PO4.

9 moles of P4O10 reacts with 51 moles of H2O, which means that 9 moles of P4O10 reacts to form 9 moles of H3PO4.

So, the number of moles of H3PO4 formed from 9 moles of P4O10 is 9 mol.

Therefore, the answer is 9 mol.

Answer:

Explanation:

it's 36 my lil sis had the question not long ago so it's 36!! :)

Which one is each.

Mixture of 2 compounds, pure substance of 2 compounds, pure substance of 2 elements, mixture of an element and a compound, mixture of 2 elements.

Answers

As per the pictorial representation,the first image is of an element while the second one is that of a mixture of an element and a compound.

What is an element?

It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.

Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.

The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.

Learn more about element,here:

https://brainly.com/question/13025901

#SPJ1

What is the correct answer please help

Answers

Bond A is considered to be a coordinate covalent bond because nitrogen provides a pair of electrons to be shared with hydrogen. That is option C.

What is a covalent bond?

A covalent bond is the type of bond that is formed when two different atoms share a pair of electrons in their outermost shell.

A dative or coordinate covalent bond is defined as the type of covalent bond where by the both electrons that are to be shared are supplied by the same atom.

Using ammonium for example, the pair of electrons shared between the ammonia and hydrogen ion is from the Nitrogen of ammonia.

Learn more about chemical bonds here:

https://brainly.com/question/29794367

#SPJ1

Hydrogen gas produced by this reaction is typically collected via water displacement, during which time the hydrogen gas becomes saturated with water vapor.
A 206.1 mL sample of gas with a total pressure 129
kPa was collected via water displacement at 29.4 °C. Calculate the partial pressure of hydrogen gas in the sample. The vapor pressure of water at 29.4 °C is 4.10 kPa.
Calculate the mass of aluminum that reacted to produce this quantity of hydrogen gas.

Answers

The mass of aluminum that reacted to produce this quantity of hydrogen gas is 0.181 g.

What is partial pressure?

Partial pressure is a term used in chemistry and physics to describe the pressure that a single gas component would exert if it occupied the same volume as a mixture of gases. In a mixture of gases, each gas exerts a pressure known as its partial pressure, which is proportional to the number of molecules of that gas in the mixture.

To calculate the partial pressure of hydrogen gas in the sample, we can use the following equation:

Partial pressure of hydrogen gas = Total pressure - Vapor pressure of water

Partial pressure of hydrogen gas = 129 kPa - 4.10 kPa = 124.90 kPa

Therefore, the partial pressure of hydrogen gas in the sample is 124.90 kPa.

To calculate the mass of aluminum that reacted to produce this quantity of hydrogen gas, we need to use the balanced chemical equation for the reaction and the ideal gas law. The balanced chemical equation for the reaction of aluminium with hydrochloric acid is as follows:

2Al + 6HCl = 2AlCl3 + 3H2

From the equation, we see that two moles of aluminum react to produce three moles of hydrogen gas. We can use the ideal gas law to calculate the number of moles of hydrogen gas in the sample:

PV = nRT

n = PV/RT

where P is the partial pressure of hydrogen gas, V is the volume of gas collected, R is the gas constant, and T is the temperature in kelvin.

First, we need to convert the temperature from Celsius to kelvin:

T = 29.4 + 273.15 = 302.55 K

Next, we can calculate the number of moles of hydrogen gas:

n = (124.90 kPa)(206.1 mL)/(8.31 L·kPa/mol·K)(302.55 K)

n = 0.0101 moles

Since two moles of aluminum react to produce three moles of hydrogen gas, the number of moles of aluminum that reacted is:

n(Al) = (2/3)n(H2) = (2/3)(0.0101 moles) = 0.00673 moles

Finally, we can use the molar mass of aluminum to calculate the mass of aluminum that reacted:

mass(Al) = n(Al) × molar mass(Al)

mass(Al) = 0.00673 moles × 26.98 g/mol = 0.181 g

To know more about Vapor pressure, visit:

https://brainly.com/question/26127294

#SPJ1

Use the term “viscosity” to explain how wetting agents are
used to help fight fires.

Answers

Wetting agents are added to water to lower its surface tension and increase its ability to penetrate porous materials like fabric, wood, and paper, which are difficult to wet with plain water.

Viscosity and fire-fighting wetting agents

Viscosity is a measure of a fluid's resistance to flow. Wetting agents are added to water to lower its surface tension and increase its ability to penetrate porous materials like fabric, wood, and paper, which are difficult to wet with plain water.

The lower surface tension caused by the wetting agent allows water to spread out more easily, creating a larger surface area to cool and extinguish flames.

The reduction in viscosity also helps the water to penetrate more deeply into the fuel, making it more effective in firefighting.

More on viscosity can be found here: https://brainly.com/question/30577668

#SPJ1

12 moles of hydrogen will produce how many moles of ammonia?

Answers

Answer:

Therefore, 12 moles of hydrogen makes 8 moles of ammonia

If a gas effuses at a rate 0.52855 times as fast as CI2 what is the gas?

Answers

Answer:

The rate of effusion for a gas is inversely proportional to the square-root of its molecular mass (Graham's Law). The gas with the lowest molecular weight will effuse the fastest. The lightest, and therefore fastest, gas is helium.

Explanation:

Consider the following reaction at equilibrium: co2 h2o ⇔ h2co3. What would be the effect of adding additional h2o?

Answers

The adding of additional H2O will result in moving of the equilibrium dynamics to the left, the amounts of CO2 and H2O would increase.

We have equation,

CO₂ + H₂O → H₂CO₃

After adding additional we get,

4CO₂ + 4H₂O → 4H₂CO₃

As equilibrium moves to the left, new reactants are formed by adding extra products to the chemical process. And the equilibrium can be changed by removing a reactant from the system. The chemical equilibrium of the processes is explained by the Le Chatelier's principle. This concept describes how changes in a system's volume, pressure, concentration, and temperature may lead to a new equilibrium state of a process.

The system's equilibrium position lowers the influence of any forced changes in the response state. That example, increasing the temperature will aid in the case of an endothermic process. The presence of a catalyst has no effect on the equilibrium reaction position.

Learn more about Equilibrium:

https://brainly.com/question/30929519

#SPJ4

Description of Entry for soil

Answers

Soil is a mixture of organic and inorganic materials that forms the uppermost layer of the Earth's crust. It is a complex, three-dimensional matrix of mineral particles, organic matter, water, air, and living organisms. Soil provides critical habitat for various microorganisms, insects, plants, and animals, making it a key component of terrestrial ecosystems.

How is soil formed?

Soil is formed through weathering, which breaks down rocks and other materials into smaller particles. Various factors, including temperature, moisture, wind, and the activities of living organisms, influence this process. Over time, layers of organic matter accumulate on the soil's surface, creating a rich environment for plant growth.

What is the function of soil?

Soil has several important functions, including supporting plant growth, regulating water flow, and cycling nutrients. It also plays a key role in carbon sequestration, helping mitigate climate change's impacts by storing carbon in the form of organic matter.

To learn more about humus, visit here:

https://brainly.com/question/19831951

#SPJ1

Looking at the solubility curve above for KClO3, at 30 degrees Celsius how many grams will dissolve to make a saturated solution?

Answers

Answer:

This is confused because they don't have choices

What percent of Zn3 (PO4)2 is zine?

Answers

Answer:

The percentage of zinc in the compound; Zn3(PO4)2 is 50.65%.

How many moles of oxygen molecules (O2) are in 63.996 g of o2

Answers

Answer:

1.99875 or 2mols

Explanation:

use the formula moles = mass/molar mass where; the molar mass = mass number of an element

find the pressure of 8.88 mol of helium gas at 20.0 C and 180L volume

Answers

According to ideal gas equation PV/nRT
To find the pressure P=nRT/V
As we know that 1 dm^3=1litre so there’s no need of changing 180 l
To convert temperature K=C+273
So
K=20+273=293K
So putting these values in equation
P=8.88x8.314x293/180
P=120.17Nm^-2

According to the ideal gas equation, the  pressure of 8.88 mole of helium gas at 20.0° C and 180 L volume is 111.97 atmospheres.

What is pressure?

Pressure is defined as the force applied on an object perpendicular to it's surface per unit area over which it is distributed.Gauge pressure is a pressure which is related with the ambient pressure.

There are various units by which pressure is expressed most of which are derived units which are obtained from unit of force divided by unit of area . The SI unit of pressure is pascal .

It is a scalar quantity which is related to the vector area element with a normal force acting on it.It is distributed over solid boundaries and across arbitary sections of fluid normal to the boundaries at every point.

According to the ideal gas equation , PV=nRT substitution gives P= 8.88×8.314×273/180=111.97 atmospheres.

Learn more about pressure,here:

https://brainly.com/question/18431008

#SPJ2

Answer the basic 5W questions about the American Heart Association study of kids' "screen-time" in Montreal, Canada

Answers

Answer: Who conducted the study?

The study was conducted by the American Heart Association.

What was the topic of the study?

The topic of the study was kids' "screen-time" and its impact on their health.

Where was the study conducted?

The study was conducted in Montreal, Canada.

When was the study conducted?

The specific timeframe of the study is not provided in the question, so it is unclear when the study was conducted.

Why was the study conducted?

The study was conducted to examine the relationship between kids' "screen-time" and their health, specifically looking at the effects on blood vessel health and arterial stiffness. The study aimed to provide more information about the potential negative impacts of excessive screen time on children's health, and to raise awareness about the importance of limiting screen time in order to promote healthier lifestyles for children.

Explanation:

in a covalent molecular bond atoms blank valence electrons to follow the octet rule in a dot diagram covalent bonds are represented with blank instead of dots

Answers

According to the Octet Rule, for a molecule to be stable, all of the atoms must have 8 valence electrons, either by sharing, losing, or acquiring electrons. Atoms typically exchange electrons within covalent bonds in order to adhere to the Octet Rule.

Define covalent bond

The exchange of one or more pairs of electrons between two atoms forms a covalent bond. The two atomic centers are drawing these electrons in unison. When there is insufficient space between two atoms' electronegativities for an electron transfer to take place and create ions, a covalent bond is formed.

To learn more about covalent bonds use:

https://brainly.com/question/3447218

#SPJ1

Subatomic particles worksheet

Answers

Answer:

I'd be happy to help with a worksheet on subatomic particles! Here are some potential questions:

1. What are the three subatomic particles found in an atom, and what are their respective charges and locations within the atom?

2. Which subatomic particle determines the identity of an atom?

3. What is the relationship between an element's atomic number and the number of protons in its nucleus?

4. What is an isotope, and how do isotopes of an element differ from each other?

5. What is the difference between an ion and an atom?

6. Describe the process of beta decay and the subatomic particles involved.

7. What is the difference between a molecule and an atom, and how are they related?

8. What is a quark, and what role do they play in subatomic particles?

9. Explain the concept of wave-particle duality and its relevance to subatomic particles.

10. What are the four fundamental forces in the universe, and which subatomic particles are involved in each force?

Explanation:

a chemist produced 26.75 moles of potassium oxide in the lab . how many particles of potassium ocide is this ?

Answers

Answer:

1.610 x 10^25 particles

Explanation:

To calculate the number of particles in 26.75 moles of potassium oxide, we can use Avogadro's number, which relates the number of particles in a substance to its number of moles.

Avogadro's number is approximately 6.022 x 10^23 particles per mole. Therefore, we can calculate the number of particles in 26.75 moles of potassium oxide as:

26.75 moles x 6.022 x 10^23 particles/mole = 1.610 x 10^25 particles

Therefore, there are approximately 1.610 x 10^25 particles of potassium oxide in 26.75 moles of the substance.

Phenol, C6H5OH, is a weak organic acid. Suppose 0. 505 g of the compound is dissolved in enough water to make 125 mL of solution. The resulting solution is titrated with 0. 123 M NaOH. C6H5OH(aq) + OH-(aq) -> C6H5O-(aq) + H2O(epsilon) What are the concentrations of all of the following ions at the equivalence point: Na+, H3O+, OH-, and C6H5O-? Ka = 1. 3 times 10^-10

Answers

At the equivalence point, 0.505 g of phenol reacted with 0.123 M NaOH to form 0.0318 M phenolate ion and 0.0319 M sodium ion, with 0 M hydroxide ion and 0.0318 M H3O+.

The balanced equation for the titration reaction is:

C6H5OH(aq) + OH-(aq) → C6H5O-(aq) + H2O(ℓ)

From the equation, we can see that 1 mole of phenol reacts with 1 mole of hydroxide ion (OH-). To determine the moles of hydroxide ion required to reach the equivalence point, we can use the following equation:

moles of OH- = M × V

where M is the concentration of NaOH, and V is the volume of NaOH required to reach the equivalence point.

To find the volume of NaOH required to reach the equivalence point, we need to calculate the moles of phenol present in the solution. We can use the following equation to do this:

moles of C6H5OH = mass ÷ molar mass

where the molar mass of phenol is 94.11 g/mol.

moles of C6H5OH = 0.505 g ÷ 94.11 g/mol = 0.005368 mol

Since 1 mole of phenol reacts with 1 mole of hydroxide ion, the moles of hydroxide ion required to reach the equivalence point is also 0.005368 mol. Using the equation above, we can calculate the volume of NaOH required:

moles of OH- = M × V

0.005368 mol = 0.123 M × V

V = 0.0437 L = 43.7 mL

Therefore, the volume of NaOH required to reach the equivalence point is 43.7 mL.

At the equivalence point, all of the phenol has reacted with the hydroxide ion, and we have a solution containing only the phenolate ion (C6H5O-) and water. The moles of C6H5O- formed at the equivalence point is equal to the moles of hydroxide ion added:

moles of C6H5O- = moles of OH- added = 0.005368 mol

The volume of the solution at the equivalence point is 125 mL + 43.7 mL = 168.7 mL.

Now, we can use the initial volume and concentration of the phenol solution to calculate the concentration of the phenolate ion and other ions at the equivalence point. The initial concentration of the phenol solution is:

C6H5OH = 0.505 g ÷ (94.11 g/mol × 0.125 L) = 0.424 M

Since the moles of phenol and phenolate ion are equal at the equivalence point, the concentration of the phenolate ion is also 0.005368 mol ÷ 0.1687 L = 0.0318 M.

At the equivalence point, all of the hydroxide ions have reacted with the phenol to form the phenolate ion and water. Therefore, the concentration of hydroxide ion at the equivalence point is 0 M.

The balanced equation also tells us that for every phenolate ion formed, a hydronium ion (H3O+) is also formed. Therefore, the concentration of H3O+ at the equivalence point is equal to the concentration of the phenolate ion:

[H3O+] = 0.0318 M

Finally, to calculate the concentration of sodium ion (Na+) at the equivalence point, we need to consider the balanced equation. For every mole of phenol that reacts, a mole of sodium hydroxide is consumed, forming a mole of sodium phenolate. Therefore, the moles of sodium ion in the solution at the equivalence point is equal to the moles of sodium hydroxide added to reach the equivalence point:

moles of Na+ = moles of NaOH added = 0.123 M × 0.0437 L = 0.00537 mol

The volume of the solution at the equivalence point is 0.1687 L. Therefore, the concentration of sodium ion at the equivalence point is:

[Na+] = 0.00537 mol ÷ 0.1687 L = 0.0319 M

In summary, at the equivalence point of the titration of 0.505 g of phenol with 0.123 M sodium hydroxide solution, the volume of NaOH required is 43.7 mL, and the concentration of the phenolate ion is 0.0318 M, the concentration of hydroxide ion is 0 M, the concentration of H3O+ is 0.0318 M, and the concentration of sodium ion is 0.0319 M.

For such more questions on Equivalence point

https://brainly.com/question/2496608

#SPJ4

HELP PLEASE!!!

How many liters of butane (C4 H10) will be needed to produce 1.55L H2O at (STP- Standard temperature and pressure) ?

Answers

Explanation:

Refer to pic..........

Approximately how long will it take for 75 percent of the initial amount of C25H30N3. +(aq) to react?

A. 75 sec.

B. 225 sec.

C. 300 sec.

D. 600 sec

Answers

to react will be, B. 225 Seconds

Approximately 225 sec, it will take for 75 percent of the initial amount of C[tex]_{25}[/tex]H[tex]_3[/tex]ON[tex]_3[/tex]⁺(aq) to react. Therefore, the correct option is option B.

What is absorbance?

The logarithm of a ratio of incident over transmitted radiant power throughout a sample is known as absorbance. As an alternative, absorbance can be characterized simply "the negative logarithm with one less absorptance, as determined on a homogeneous sample," for samples that scatter light.

In several technical fields, the phrase is used to describe how experimental measurement data are quantified. Although the phrase refers to measuring how much light is absorbed, it is frequently confused with measuring how much light is "lost" to either a detector system by other methods. Approximately 225 sec, it will take for 75 percent of the initial amount of C[tex]_{25}[/tex]H[tex]_3[/tex]ON[tex]_3[/tex]⁺(aq) to react.

Therefore, the correct option is option B.

To know more about absorbance, here:

https://brainly.com/question/23938376

#SPJ2

Your question is incomplete but most probably your full question was,

Approximately how long will it take for 75 percent of the initial amount of C25H30N3. +(aq) to react?

A. 75 sec.

B. 225 sec.

C. 300 sec.

D. 600 sec

I NEED THIS QUICK!!!
how many liters of CO2 are produced when 48.92g CaCO3 decomposes?

Answers

48.92 g of CaCO3 decomposes to produce 10.94 L of CO2 at STP.

What is calcium carbonate?

Carbonic salt of calcium is called Calcium Carbonate.

CaCO3(s) → CaO(s) + CO2(g)

Molar mass of CaCO3 is 100.09 g/mol, so we calculate the number of moles of CaCO3 present as:

48.92 g CaCO3 ÷ 100.09 g/mol = 0.488 mol CaCO3

0.488 mol CO2 are produced

As volume of 1 mole of ideal gas at standard temperature and pressure (STP) is 22.4 L, hence we calculate volume of CO2 produced at STP as:

0.488 mol × 22.4 L/mol = 10.94 L

Therefore, 48.92 g of CaCO3 decomposes to produce 10.94 L of CO2 at STP.

To know more about calcium carbonate, refer

https://brainly.com/question/29671908

#SPJ1

Which type of bond is sodium bromide

Answers

Answer: Ionic bonding

Explanation:

metal + non metal = ionic bond

Sodium = metal

Bromine = nonmetal

Hi! I'm here to help you.

Sodium bromide is an ionic bond. This means that sodium and bromine atoms are attracted to each other to form a compound. This is because sodium has an atomic number of 11 and a positive charge number, while bromine has an atomic number of 35 and a negative charge number. These opposite charges attract each other to form the ionic bond.

I hope my help was useful to you! If so, could you give me a small reward in recognition of my efforts? Thank you for your consideration!
Other Questions
The locations of mineral and gem formation depend on different Earth processes. Some gems need heat, extreme pressure, or even a certain type of rock layer to form.Which location in the figure shows where opal is most likely to form? Which of the following is a political bias of the Republican Party?Universal HealthcareBigger GovernmentReduce Spending Part A What is a central idea in Roosevelt's "Address to Congress Requesting a Declaration of War"? Responses The United States will need the support of its allies to be successful at war with Japan. The United States will need the support of its allies to be successful at war with Japan., The United States should declare war with Japan due to a series of attacks in other parts of the world over a period of months. The United States should declare war with Japan due to a series of attacks in other parts of the world over a period of months., The United States is already at war with the Japanese, since they attacked without provocation. The United States is already at war with the Japanese, since they attacked without provocation., The United States is in negotiations with the Japanese but will declare war if they fail to continue communications. The United States is in negotiations with the Japanese but will declare war if they fail to continue communications., Question 2 Part B - Points depend on a correct response in Part A. How does Roosevelt develop the central idea cited in Part A? Responses Roosevelt provides a history of Japanese aggression toward other countries throughout history. Roosevelt provides a history of Japanese aggression toward other countries throughout history. Roosevelt lists Japanese attacks and is careful to mention that he is still negotiating to avoid war. Roosevelt lists Japanese attacks and is careful to mention that he is still negotiating to avoid war. Roosevelt describes recent attacks on the United States and in the Pacific that prove the Japanese wants to engage in war. Roosevelt describes recent attacks on the United States and in the Pacific that prove the Japanese wants to engage in war. Roosevelt explains the tone of negotiations with Japan over a period of several months has been positive. Which choice correctly describes this event? I will roll a standard die and land on either 1, 2 or 3. Mr. Hawkins is covering a wall with wallpaper. The rectangular wall measures 12 feet by 20 feet. Each square foot of wallpaper costs $4.50. Find the cost of covering the wall with wallpaper. $ In what direction would you travel to get from ancient Greece to Egypt? What is the number two cause of collisions and wrecks what is the mechanical advantage? When an ideology (the worldview of a group of people) becomes the accepted "common sense" view of reality throughout a society, it becomes ____________. (Fill in the blank) The brain weight of a newborn baby is about 13% of the body weight of the newborn. If a newborn weighs 2,900 grams, about how much does the brain weigh? what is the answer of square root of 27 to the power of 3 The diagram below depicts the Lunar cycle using the model above, which of the following moon phases would be present during a neap tide? Can someone please help me Greatest Common Factor and Factor the following polynomial by grouping ab+8a+2b+16 GHI Company bonds have a coupon rate of 4.11 percent, 7 years to maturity, and a current price of $1,032. What is the current yield on these bonds (in percent)? Answer to two decimals.Bonds are $1000 Par Semiannual Compounding Suppose that a vestigial tail is caused by a hypomorphic allele but it appears in only 5% of individuals homozygous for the allele. Two heterozygotes conceive a child. What is the probability that this child will have a vestigial tail? TRUE OR FALSE - "Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo." is a grammatically correct sentence. To get from Boone to Charlotte, you would have to drive about 156.6 km on the shortest route. To get from Boone to Anchorage, AK, you would have to drive 4,212.7 miles. How many orders of magnitude larger is the distance from Boone to Anchorage than Boone to Charlotte? (1 mi = 1.61 km). List all the zeros of the polynomial function F(x) = x^4 - 2x^3 - 6x^2 +22x - 15 Lim had $5145. He withdrew an additional $1040 from his bank account.divided the total amount equally among his 5 sons. How much did eachreceive?