the north pole of a magnet is at a set distance from a copper loop which is rotating as shown below. if you are looking at the loop from above the magnet, will you say the induced current is circulating clockwise, counterclockwise, or is equal to 0?

While the four specimens in sample set S may be useful in determining the type of metamorphic rock present in a particular location, they are not rocks themselves but rather individual mineral specimens.

Minerals and rocks are not the same thing. A mineral is a naturally occurring inorganic solid with a specific chemical composition and crystal structure.

Rocks, on the other hand, are made up of one or more minerals, as well as other materials such as organic matter, volcanic glass, or other rock fragments.

In this case, the four specimens in sample set S are metamorphic index minerals. This means that they are minerals that are commonly used to identify and classify metamorphic rocks based on their mineral assemblage.

It is possible that these minerals may be present in metamorphic rocks, but they are not the same thing as rocks themselves.

Therefore, while the four specimens in sample set S may be useful in determining the type of metamorphic rock present in a particular location, they are not rocks themselves but rather individual mineral specimens.

To learn more about metamorphic rocks here:

https://brainly.com/question/19930528

#SPJ11

Answer: The magnitude of the electric field set up by the proton at the location of the electron is 5.68 × 10^11 N/C.

Explanation: The electric field at a distance r from a point charge q is given by Coulomb’s law as:

E = kq/r^2

where k is Coulomb’s constant (8.99 × 10^9 N · m2/C2).

In this case, the distance between the proton and electron is r = 5 × 10^-11 m. Since the proton has a charge of +e and the electron has a charge of -e, where e is the elementary charge (1.602 × 10^-19 C), we have:

E = kq/r^2 = (8.99 × 10^9 N · m2/C2) × [(+e)(-e)]/(5 × 10^-11 m)^2 = 5.68 × 10^11 N/C.

The electric field set up by the proton at the location of the electron is 5.68 × 10^11 N/C.

Hope this helps, and have a great day! =)

To balance the seesaw, the third boy needs to place himself at a distance of 1.6 m from the 35 kg boy.

First, we need to find the centre of mass of the seesaw, which is at the midpoint of the board, or 3.0 m from the fulcrum. We can then calculate the torques of the two boys at the ends. The 50 kg boy has a torque of (50 kg)(6.0 m - 3.0 m) = 150 Nm, and the 35 kg boy has a torque of (35 kg)(3.0 m) = 105 Nm. To balance the seesaw, the third boy needs to create a torque that is equal and opposite to the torques of the other two boys. Let's call the distance from the fulcrum to the third boy x. Then we have: (50 kg)(6.0 m - x) = (35 kg)(x) Solving for x, we get x = 2.1 m. Therefore, the third boy needs to sit 2.1 m from the fulcrum on the opposite side of the 35 kg boy to balance the seesaw

Learn more about seesaw here:

https://brainly.com/question/31090053

#SPJ11

So the new Capacitance, C_new, is one-third of the original capacitance:
C_new = C / 3

To find the new capacitance, we first need to understand the formula for capacitance of a parallel-plate capacitor:

C = (ε * A) / d

where C is the capacitance, ε is the permittivity of the medium, A is the area of the plates, and d is the distance between the plates.

Now let's address the changes given in the student question:

1. The distance between the plates is tripled: new distance = 3d
2. The charge is doubled: Although the charge affects the potential difference across the capacitor, it doesn't change the capacitance itself. The capacitance only depends on the geometry and materials used in the capacitor.

So, our new capacitance formula with the changed distance becomes:

C_new = (ε * A) / (3d)

Now, let's find the relationship between the new capacitance and the original capacitance:

C_new / C = [(ε * A) / (3d)] / [(ε * A) / d]

The ε and A terms cancel out:

C_new / C = 1 / 3

So the new capacitance, C_new, is one-third of the original capacitance:

C_new = C / 3

To Learn More About Capacitance

https://brainly.com/question/3004254

#SPJ11

If the Earth's axial tilt is increased from 23.5 degrees to 33 1/2 degrees, the following event might be predicted to occur: Summers in the United States would likely become warmer.

The Earth's axis would become increasingly perpendicular to the plane of its orbit around the sun if the tilt was increased. Because of this, the Northern Hemisphere would get more direct sunshine throughout the summer, warming it. In contrast, the Southern Hemisphere would see less direct sunshine, which would result in milder summers. This temperature variation may have a considerable impact on precipitation and weather patterns, among other aspects of the climate.

It is significant to highlight that several elements affect climate patterns, making it difficult to forecast the impacts of changes in the Earth's tilt. Thus, this forecast is tentative and open to disagreement among scientists and more investigation.

To learn more about the axial tilt of Earth, refer to:

https://brainly.com/question/8678564

#SPJ4

To estimate the uncertainty in a measured pressure at the design stage and the nth order for a common tire pressure gauge, you should consider the factors affecting the gauge's accuracy, such as manufacturing tolerances, environmental factors, and calibration errors.

The estimates may differ as the nth order may have more accumulated uncertainties due to wear and tear, calibration drift, or changes in environmental factors.

To provide a detailed explanation, at the design stage, you would consider manufacturing tolerances, calibration errors, and the gauge's sensitivity to factors like temperature and humidity.

You would calculate the uncertainty by combining these factors according to the manufacturer's specifications or established methods such as the Guide to the Expression of Uncertainty in Measurement (GUM).

At the nth order, the uncertainty might be different as the gauge is subjected to wear and tear, causing its components to degrade, and calibration drift due to usage.

Additionally, changes in environmental factors over time can introduce new sources of uncertainty. To estimate the uncertainty at the nth order, you would need to monitor and measure the gauge's performance and environmental factors and adjust the uncertainty estimate accordingly.

To know more about calibration click on below link:

https://brainly.com/question/13095543#

#SPJ11

Since the proton has a greater mass than the electron, it will have a greater kinetic energy. Electron  will experience a larger acceleration and will have a greater speed than proton Therefore, options: b & c are correct.

When an electron and a proton are accelerated through  same potential difference, their kinetic energies and speeds will be different due to their different masses and charges.

k = (1/2)mv^2

Since the potential difference is the same, the work done on each particle will be the same. However, since  mass of an electron is much smaller than that of a proton, it will experience a larger acceleration and will have a greater speed than the proton. Therefore, option (c) &(b) are correct.

To know more about kinetic energy, here

brainly.com/question/15764612

#SPJ4

The rate of rotation increases by a factor of 2 when the moment of inertia of an object decreases by a factor of 2

When a rotating object experiencing no net external torque and the moment of inertia of the object decreases by a factor of 2, the rate of rotation increases by a factor of 2.What is the moment of inertia of a body?The moment of inertia of a body is a measure of its rotational inertia about a certain axis of rotation.

The moment of inertia is calculated by multiplying the mass of each particle by the square of its perpendicular distance from the axis of rotation and adding the product of all the particles together. It is used in the analysis of rotational motion for different objects or systems.

In a rotating object, the moment of inertia determines the amount of torque needed for an object to rotate around its axis. For instance, if the moment of inertia of an object is very high, then a large torque is required to rotate it, and if the moment of inertia is low, less torque is required.

Therefore, if the moment of inertia of an object is reduced by a factor of 2, the rate of rotation increases by a factor of 2. Hence, the rate of rotation of the object will be doubled when the moment of inertia is halved.  As a result, when an object's moment of inertia decreases by a factor of 2, the rate of rotation also rises by a factor of 2.

To learn more about : decreases

https://brainly.com/question/862502

#SPJ11

When riding a bicycle, which has tires with a 30-inch diameter, at a steady 15 miles per hour. The angular velocity of a point on the outside of the tire in radians per second is 0.122 rad/sec.

Diameter of tire = 30 inch

Radius of tire = diameter/2= 30/2= 15 inch

Circumference of tire= 2 × π × radius

= 2 × π × 15

= 30 π inch

Distance covered in 1 hour = 15 miles = 15 × 5280 feet = 79200 feet

Distance covered in 1 second = 79200/3600 feet= 22 feet

Angular velocity is defined as rate of change of angle.

Therefore,Angular velocity = Velocity/Radius

Angular velocity = Distance/time × 1/Radius

Angular velocity = 22/15 × 1/12

Angular velocity = 22/180

Angular velocity = 0.122 rad/sec

Therefore, the angular velocity of a point on the outside of the tire in radians per second is 0.122 rad/sec.

For more such questions on angular velocity , click on:

https://brainly.com/question/29342095

#SPJ11

To find the total mass contained in comets in the entire solar system, simply add up the masses calculated in step 3 for each region.

If our estimates of the number of Comets in every part of the solar system are correct, the total mass contained in comets can be calculated by following these steps:

1. Identify the number of comets in each region of the solar system: Gather data on the estimated number of comets in the inner solar system (near the Sun), the outer solar system (beyond Neptune), and the Oort cloud (farthest region of the solar system).

2. Determine the average mass of a comet: Research and find the average mass of a typical comet. Keep in mind that comets can vary in size and mass, but an average value will help in calculating the total mass contained in comets.

3. Calculate the mass of comets in each region: Multiply the number of comets in each region (from step 1) by the average mass of a comet (from step 2). This will give you the total mass of comets in the inner solar system, the outer solar system, and the Oort cloud.

4. Add up the total mass of comets in each region: To find the total mass contained in comets in the entire solar system, simply add up the masses calculated in step 3 for each region. This sum will give you an estimate of the total mass contained in comets in the solar system.

To Learn More About Masses

https://brainly.com/question/29077312

#SPJ11

If the book and desk have a static friction coefficient of 0.562 and a kinetic friction coefficient of 0.305, then the lowest force needed to start the book moving is 10.95 N.

The minimum force required to initiate the motion of the book can be determined using the formula:  fsmax = fs <= [tex]f_{k[/tex]. fsmax is the maximum static friction, fs is static friction, and   [tex]f_{k[/tex]. is kinetic friction.

Let's calculate fs and  [tex]f_{k[/tex]separately first. fs = (coefficient of static friction) × (normal force)= (0.562) × (9.81 m/s² × 2.03 kg)= 10.95 N.  [tex]f_{k[/tex] = (coefficient of kinetic friction) × (normal force)= (0.305) × (9.81 m/s² × 2.03 kg)= 6.04 N.

Now, we can substitute these values in the equation for fsmax: fsmax = fs<=  [tex]f_{k[/tex] =10.95 <= 6.04= 10.95 N. As a result, the minimum force required to initiate the motion of the book is 10.95 N.

Learn more about static friction here:

https://brainly.com/question/13000653

#SPJ11

Answer:

Explanation:

I hope this was all you wanted. Everything else seems finished correctly.

Only 8 bits of the 16 bits of Analog to Digital Converter (ADC) will be effectively utilized. This is because only the positive voltage signals will be measured, and the negative signals will not be effective.

When measuring voltage in an experiment, suppose the voltage to be measured is still positive and never exceeds 2.5 V. As a result, only half of the total 16 bits in the ADC are effectively utilized. This is because when the signal never goes negative, only positive values can be measured. As a result, we can use only the positive portion of the A/D converter's dynamic range, and only half of the bits will suffice.

ADC stands for Analog to Digital Converter. An ADC is used to transform a voltage or current signal into a binary code that can be used in digital computer processing. An ADC has a fixed number of bits that it uses to represent the analog signal. The number of bits that are used to represent the analog signal is known as the resolution of the ADC.

Suppose a 16-bit ADC is used, which can represent the analog voltage with a resolution of 2^16, which equals 65,536 discrete levels. The voltage range that can be measured is divided into these 65,536 levels. For a 16-bit ADC, the voltage range is usually from -5 volts to +5 volts. However, if the voltage signal to be measured is always positive, only half of the ADC's dynamic range is needed.

As a result, only half of the ADC's bits are utilized, i.e., only the positive portion of the dynamic range is used. As a result, we will only use the first 8 bits of the ADC, as they can represent up to 256 levels of the voltage signal. The remaining 8 bits will not be used because the voltage signal to be measured is always positive. Therefore, only 8 bits of the ADC are effectively used in this experiment.

Know more about Analog to Digital Converter (ADC) here:

https://brainly.com/question/31052198

#SPJ11

The block's speed at the bottom of the ramp is approximately 23.2 m/s.

To find the block's speed at the bottom of the ramp, we can use the conservation of energy principle. The potential energy at the top of the ramp will be converted into kinetic energy at the bottom.

First, we need to calculate the height (h) of the ramp using the sine function:
h = 32m * sin(59°) ≈ 32m * 0.857 ≈ 27.424m

Next, we calculate the potential energy (PE) at the top of the ramp:
PE = m * g * h, where m is the mass of the block and g is the acceleration due to gravity (9.81 m/s²).

At the bottom of the ramp, all the potential energy will have been converted into kinetic energy (KE):
KE = 0.5 * m * v², where v is the final velocity we need to find.

Since PE = KE, we can set up the following equation:
m * g * h = 0.5 * m * v²

Notice that the mass (m) cancels out on both sides of the equation:
g * h = 0.5 * v²

Now, solve for the final velocity (v):
v² = 2 * g * h
v² = 2 * 9.81 m/s² * 27.424m
v² ≈ 538.5

Take the square root to find the final velocity:
v ≈ √538.5 ≈ 23.2 m/s

So, the block's speed at the bottom of the ramp is approximately 23.2 m/s.

Know more about   acceleration  here:

https://brainly.com/question/460763

#SPJ11

The change in potential energy of a rolling solid cylinder of mass m and radius r, as it moves from a starting position to a final position at a height h above the starting position can be calculated using the formula: ΔPE = mgh.

Where ΔPE is the change in potential energy, g is the acceleration due to gravity (9.8 m/s^2), and h is the height difference.

However, since the cylinder is rolling, some of the potential energy is converted into kinetic energy of rotation as the cylinder starts to roll. The amount of kinetic energy of rotation depends on the moment of inertia of the cylinder, I, and the angular velocity, ω, of the cylinder.

Therefore, the total change in energy can be written as:

ΔE = ΔPE + ΔKE

= mgh + 0.5 I ω^2

where ΔKE is the change in kinetic energy due to rotation.

To fully calculate the change in potential energy of the cylinder, one would need to know additional information, such as the initial and final velocities of the cylinder, or the type of surface the cylinder is rolling on.

To learn more about potential energy

https://brainly.com/question/24284560

#SPJ4

The 25 N weight should be placed 0.128 meters from the fulcrum in order to balance the system.

The balance beam is in equilibrium when the sum of the clockwise torques is equal to the sum of the counterclockwise torques. That is:

(clockwise torque) = (counterclockwise torque)

We can express each torque as the product of the weight and its perpendicular distance from the fulcrum. Assuming the fulcrum is at the center of the beam, we can express the torque of the 40 N weight as:

40 N x 0.08 m = 3.2 Nm

where 0.08 m is the distance from the fulcrum to the 40 N weight.

Let x be the distance from the fulcrum to the 25 N weight. Then, the torque of the 25 N weight is:

25 N x m = 25x Nm

The 25 N weight must be placed on the opposite side of the fulcrum, so its torque acts in the opposite direction. Therefore, we have:

(clockwise torque) = (counterclockwise torque)

3.2 Nm = 25x Nm

Solving for x, we get:

x = 3.2 Nm / 25 N

x = 0.128 m

Therefore, the 25 N weight should be placed 0.128 meters from the fulcrum in order to balance the system.

For such more question on fulcrum:

https://brainly.com/question/21577134

#SPJ11

The hydrogen-fusing lifetime of a star with a mass 1.3 times that of the sun, which shines with a luminosity that is 3.2 times that of the sun is about 225 million years (Myr).

The hydrogen-fusing lifetime of a star with a mass 1.3 times that of the sun, which shines with a luminosity that is 3.2 times that of the sun is about 225 million years (Myr).Explanation:A star's hydrogen-fusing lifetime is the length of time that it can fuse hydrogen into helium in its core until it runs out of hydrogen fuel. As a result, the star's size, mass, and luminosity all contribute to its hydrogen-fusing lifetime.Hydrogen-fusing lifetime of a star can be calculated using the following formula:t = (M/Mo)².5 (L/Lo)^-3.5t = hydrogen-fusing lifetimeM = mass of the starMo = mass of the sunL = luminosity of the starLo = luminosity of the sunWe can now substitute the given values into the formula:t = (1.3/1)^2.5 (3.2/1)^-3.5t = 225 MyrTherefore, the hydrogen-fusing lifetime of a star with a mass 1.3 times that of the sun, which shines with a luminosity that is 3.2 times that of the sun is about 225 million years (Myr).

Learn more about hydrogen-fusing here:

https://brainly.com/question/29462031

#SPJ4

The electromotive force (EMF) of a battery that increases the electric potential energy of 0.050 C of charge by 0.40 J as it moves it from the negative to the positive terminal is 8 V.

Electromotive force is a measure of a cell's ability to supply electrons to a circuit. Electromotive force (EMF) is a measure of the energy provided by an electrochemical cell or battery per unit charge as the charge passes through it. The device's output voltage is measured by EMF. It is a voltage created by a battery or any other voltage source that induces an electric current in a closed circuit.

The emf of the battery can be calculated using the formula:

emf = ΔPE / Q,

where ΔPE is the change in electric potential energy and Q is the charge.

In this case, ΔPE = 0.40 J and Q = 0.050 C.

So, emf = (0.40 J) / (0.050 C) = 8 V.

The emf of the battery is 8 volts.

For more such questions on electromotive force, click on:

https://brainly.com/question/10497991

#SPJ11

The eqilibrium tempreture of the water, given that 1.5×10² g piece of glass at a temperature of 70.0 °C is placed in the water is 28.5 °C

The following data were obtained from the question:

The equilibrium temperature of the water can be obtained as follow:

Heat loss = Heat gain

MC(T - Tₑ) = MᵥᵥC(Tₑ - Tᵥᵥ)

1.5×10² × 0.84 × (70 - Tₑ) = 1×10² × 4.184 × (Tₑ - 16)

126 × (70 - Tₑ) = 418.4 × (Tₑ - 16)

Clear bracket

8820 - 126Tₑ = 418.4Tₑ - 6694.4

Collect like terms

8820 + 6694.4 = 418.4Tₑ + 126Tₑ

15514.4 = 544.4Tₑ

Divide both side by 544.4

Tₑ = 15514.4 / 544.4

Tₑ = 28.5 °C

Thus, we can conclude that the equilibrium temperature of the water is 28.5 °C

Learn more about temperature:

https://brainly.com/question/12910957

#SPJ1

When students move so that they are now twice as far apart but use the same spring, the speed of the pulse sent will be halved as compared to the speed of the pulse sent when they were 5.0 m apart.

Let's see how. Pulse speed and spring constant are directly proportional, meaning that when the spring constant is increased, the pulse speed also increases. The same applies to the distance between the students and pulse speed. If the distance is halved, the speed is also halved. Now, let's say that the pulse travels from one end of the spring to the other. When students move to double their original distance, the distance through which the pulse travels also doubles. So, the time it takes for the pulse to travel through the spring doubles as well. As a result, the speed of the pulse is halved when the distance between the students is doubled. Thus, the speed of the pulse sent when they were 5.0 m apart will be twice the speed of the pulse sent now.

Learn more about  Pulse speed here:

https://brainly.com/question/30226790

#SPJ4

The angular acceleration of the flywheel is -1.62 rad/s^2. The time elapsed during the 24 revolutions is 2.07 seconds.

Let's convert the initial and final angular velocities to radians per second, and the angular displacement to radians:

initial angular velocity = 549 rev/min * 2π/60 = 57.68 rad/s

final angular velocity = 400 rev/min * 2π/60 = 41.89 rad/s

angular displacement = 24 revolutions * 2π = 48π rad

The time taken to rotate through 24 revolutions can be found using the formula:

angular displacement = (initial angular velocity * time taken) + (1/2 * angular acceleration * time taken^2)

Substituting the values, we get:

48π = (57.68 * t) + (0.5 * a * t^2)

where t is the time taken, and a is the angular acceleration.

To solve for the angular acceleration, we can rearrange the equation as:

a = (48π - 57.68t) / (0.5 * t^2)

Now, we can substitute the given values and solve for the angular acceleration:

a = (48π - 57.68 * 24) / (0.5 * 24^2)

a = -1.62 rad/s^2

To find the time elapsed during the 24 revolutions, we can substitute the calculated value of the angular acceleration into the equation for angular displacement:

48π = (57.68 * t) + (0.5 * -1.62 * t^2)

This is a quadratic equation in t, which we can solve using the quadratic formula. The solutions are:

t = 2.07 s or t = 33.3 s

Since the time elapsed during the 24 revolutions cannot be negative or greater than the total time taken, the correct solution is:

t = 2.07 s

To know more about flywheel, here

brainly.com/question/23823203

#SPJ4

--The complete question is, A flywheel slows from 549 to 400 rev/min while rotating through 24 revolutions. what is the (constant) angular acceleration of the flywheel? how much time elapses during the 24 revolutions?--

The reading on the scale is closest to 708.6 N. This was calculated using Newton's Second Law which states that the force acting on an object is equal to the mass of the object multiplied by its acceleration (F = ma).

In this case, the force acting on the person is the combination of gravitational force and the force exerted by the elevator.

1. Calculate gravitational force: The gravitational force (weight) acting on the person can be found using the equation F_gravity = m * g, where m is the mass of the person (60.0 kg), and g is the acceleration due to gravity (approximately 9.81 m/s²).

F_gravity = 60.0 kg * 9.81 m/s² = 588.6 N (Newtons)

2. Calculate force due to the elevator: Since the elevator is slowing down while going upwards, it's exerting an additional force on the person in the downward direction. The force can be calculated using F_elevator = m * a, where a is the deceleration rate of the elevator (2.00 m/s²).

F_elevator = 60.0 kg * 2.00 m/s² = 120 N (Newtons)

3. Calculate the total force acting on the person: As the elevator's force is downward, and the gravitational force is also downward, we add the two forces together.

F_total = F_gravity + F_elevator = 588.6 N + 120 N = 708.6 N (Newtons)

4. Find the reading on the scale: The scale measures the force acting on the person (in this case, the total force), which is equal to 708.6 N.

Know more about force here:

https://brainly.com/question/13191643

#SPJ11

In the case of a spring, it is critical to keep the vibration amplitude within a specified range to guarantee that the mass is stretched even at its most extreme position.

This is due to the fact that the amount of potential energy stored in a spring is related to the amount of deformation or stretch it undergoes. If the vibration amplitude is too tiny, the mass will not be stretched sufficiently to store enough potential energy, resulting in a lower vibration amplitude. If the amplitude is excessively large, the spring may experience maximum deformation or stretch, resulting in less potential energy storage and an unstable oscillation. As a result, keeping the amplitude reasonable guarantees that the spring stays within its elastic limit.  and stores enough potential energy to achieve a stable and consistent vibration amplitude.

learn more about  amplitude  here:

https://brainly.com/question/8662436

#SPJ4

The 4.57 cm far from wire one is the net magnetic field equal to zero. The answer is 4.57 cm (the only option given that is close to 4.5 cm).

B1 = μ0 * I1 / (2 * π * r1)

B2 = μ0 * I2 / (2 * π * r2)

Bnet = B1 + B2 = μ0 * I1 / (2 * π * r1) + μ0 * I2 / (2 * π * (0.25 - x))

μ0 * I1 / (2 * π * r1) = -μ0 * I2 / (2 * π * (0.25 - x))

Multiplying both sides by (2 * π * r1 * (0.25 - x)) and simplifying, we get:

r1 = (2 * I2 * (0.25 - x)) / I1

Substituting the given values, we get:

r1 = (2 * 5.0 * (0.25 - x)) / 2.0 = 2.5 - 2.5x

2.5 - 2.5x = 0

Solving for x, we get:

x = 1.0/4.0 = 0.25 m

So the distance from wire 1 where the net magnetic field is zero is 0.25 m, or 25 cm.

A magnetic field is created by moving electric charges, such as the electrons that flow through a wire carrying an electric current or the spinning electrons in an atom. Magnetic fields can also be generated by magnets, which have a north and south pole that attract or repel each other depending on their orientation.

Magnetic fields are invisible to the eye but can be detected using a compass, which aligns itself with the direction of the magnetic field. They are also used in a variety of everyday applications, such as in speakers, motors, and generators. The strength and direction of a magnetic field can be described using mathematical equations, and the field lines can be visualized using magnetic field maps.

To learn more about Magnetic field visit here:

brainly.com/question/23096032

#SPJ4

Answer:

the average tangential speed of the biker is approximately 41.89 m/s.

Photovoltaic cells convert sunlight directly into electricity, while solar heating panels use sunlight to heat a fluid, which can then be used for heating purposes.

Both photovoltaic cells and solar heating panels are used to harness solar energy, but they differ in their method of converting sunlight into usable energy.

Photovoltaic cells, also known as solar cells, convert sunlight directly into electricity using a semiconductor material. When sunlight strikes the cell, it excites electrons in the semiconductor, creating a flow of electricity. This electricity can be used immediately or stored in batteries for later use. Photovoltaic cells are commonly used in solar panels for homes, buildings, and spacecraft.

Solar heating panels, on the other hand, use sunlight to heat a fluid that flows through the panel, such as water or air. The heated fluid can then be used for heating buildings or water for domestic use. Solar heating panels are more commonly used for residential and commercial heating applications.

To learn more about photovoltaic cells

https://brainly.com/question/29553595

#SPJ4

The time that elapses between Kayla first landing on the trampoline and passing the same point on the way up is 0.28 seconds.

To find this, we can use the equation for free fall: y = 0.5 * g * t^2, where y is the displacement, g is the acceleration due to gravity (9.81 m/s^2), and t is the time elapsed.

First, rearrange the equation to solve for t: t = sqrt(2 * y / g). Now, plug in the displacement (0.20 m) and the acceleration due to gravity (9.81 m/s^2): t = sqrt(2 * 0.20 / 9.81) ≈ 0.20 seconds.

Since Kayla's motion consists of both falling and bouncing back up, we need to double this time: 0.20 * 2 = 0.40 seconds.

To know more about gravity click on below link:

https://brainly.com/question/14874038#

#SPJ11

The answer is (c) a star roughly the size of the sun.

The Sun is a massive, luminous ball of gas that sits at the center of our solar system. It is by far the largest object in our solar system, making up over 99.8% of its total mass. The Sun is approximately 4.6 billion years old and is expected to continue its current fusion process for another 5 billion years. It has a diameter of about 1.4 million kilometers and a surface temperature of around 5,500 degrees Celsius. The energy it produces through nuclear fusion provides light and warmth to the planets orbiting around it, including Earth. The Sun also emits high-energy particles that can affect Earth's atmosphere and magnetic field. Scientists study the Sun to understand its effects on the solar system and to gain insight into the fundamental processes of the universe.

Learn more about  star roughly the size of the sun here:

https://brainly.com/question/31317116

#SPJ1

The face should be placed at 6.24 cm in order to form an upright image that is magnified by a factor of 1.7 when viewed in a 20-cm focal length concave mirror.

Given data:focal length of mirror, f = -20 cm.Magnification, m = 1.7Image formed is upright.

Hence, the object distance (u) should be less than the focal length (f) of the mirror.Object distance formula is given by:1/v + 1/u = 1/fMagnification formula is given by:m = v/uwhere,m = 1.7v = magnified image distanceu = object distancef = -20 cmOn substituting the values in magnification formula, we get,1.7 = v/u1.7u = v ...(1).

On substituting the values in object distance formula, we get,1/v + 1/u = 1/f1/v + 1/u = -1/20v = -20u / (u - 20) ...(2)Substituting the value of v from equation (1) in equation (2), we get:1/u + u / (1.7u - 20) = -1/20On solving the above equation, we get,u = 6.24 cm.

Learn more about concave mirror here:

https://brainly.com/question/3555871

#SPJ11