the lower the amount of work to be moved from the human side to the computer side of an information system, the higher is the complexity of that system. true false

When an alarm is set off without any genuine security danger or circumstance that would warrant the warning, it is known as an intrusion detection systems false positive alert.

False positives in intrusion detection systems (IDS) are a typical occurrence and can be brought on by a number of things, including misconfiguration, noisy data, or out-of-date signatures. An IDS false positive alert is one that is generated when there is no actual security risk or condition that would justify the warning. False positives may be inconvenient and time-consuming to investigate, but they are typically viewed as preferable than failing to identify a real positive, which would permit a security breach to take place unnoticed. IDS administrators should routinely evaluate and improve their systems to reduce the frequency of false positives.

learn more about intrusion detection systems here:

https://brainly.com/question/13993438

#SPJ4

In a shortest path problem, each link is assigned a number, and in the solution, each decision variable is also assigned a number. The numbers assigned to each link and decision variable represent the length or cost of that particular link or decision variable.

for such more question on variable

https://brainly.com/question/28248724

#SPJ11

(a) The number of bits per symbol that can be transmitted is 2 bits.

(b) Four-PAM symbols: {−3, −1, +1, +3}. After modulation, the sequence of bits f0, 0, 1, 0, 1, 1, 0, 1g was transmitted using 4-PAM digital modulation.

-Since 4-PAM digital modulation can send two bits per symbol. As a result, each 4-PAM symbol represents two consecutive bits.The number of bits per symbol that can be transmitted is 2 bits.

- A mapping from bits to 4-PAM symbols:Mapping: 00 → −3Mapping: 01 → −1Mapping: 11 → +1Mapping: 10 → +3The mapping of bits to 4-PAM symbols is as follows: Mapping: 00 → −3Mapping: 01 → −1Mapping: 11 → +1Mapping: 10 → +3The table below shows the values of f0, 0, 1, 0, 1, 1, 0, 1g after modulation. 0 and 1 in the sequence of bits are mapped to −3 and −1, respectively, using the mapping.Mapping: 00 → −3Mapping: 01 → −1Mapping: 11 → +1Mapping: 10 → +3Sequence of Bits: f0; 0; 1; 0; 1; 1; 0; 1gMapping: −3; −3; −1; −3; −1; +1; −3; +1Four-PAM symbols: {−3, −1, +1, +3}

Learn more about  bits  here: https://brainly.com/question/8431891

#SPJ11

The statement "hub-based Ethernet is a star physical topology and a bus logical topology" is true.

This is because Ethernet is a network protocol that has both physical and logical topologies. In a physical topology, Ethernet uses a star topology. In this type of topology, every device is connected to a central device called a hub. The hub is responsible for managing the network traffic between devices. In a logical topology, Ethernet uses a bus topology.

In this type of topology, all devices are connected to a single communication line called a bus. Data travels along the bus, and each device reads the data as it passes. Therefore, it is true that hub-based Ethernet is a star physical topology and a bus logical topology.

Learn more about  hub-based Ethernet:https://brainly.com/question/29304365

#SPJ11

Most likely, Renata, the business analyst, would be utilising Power Query, a data transformation and modelling tool in Power BI. Users can perform data operations and connect to different data sources.

To predict future performance, predictive analytics employs statistics and modelling techniques. Predictive approaches are used in fields and industries like insurance and marketing to make crucial choices.

Using only data from police resources, for instance, would present a danger in predictive policing models as this would only include crimes, arrests, or other actions by police personnel.

To know more about data visit:-

https://brainly.com/question/11941925

#SPJ1

The modules in Java are called classes.

What are modules in programming?

Modules are the building blocks of a program that are constructed using small, simple components that make them easier to maintain. Programming languages include libraries that include sets of pre-written code that a developer can use to quickly and efficiently build programs. Classes and methods are two of the fundamental constructs in Java. Modules in Java are called classes. Classes in JavaClasses are one of the fundamental building blocks of Java programming. A class is a blueprint or a template for creating objects in a program. Classes are made up of fields, methods, and constructors. Fields are variables that store data, methods are functions that operate on that data, and constructors are methods that create objects. Classes in Java are used to create objects that are used in programs. A class defines the characteristics of an object, including its properties and methods. Classes are used to create objects and are the basic building blocks of object-oriented programming.

Learn more about modules  here: https://brainly.com/question/27682740

#SPJ11

The main tools with which a user may manage, improve, and change images are graphic software programmes, which can be roughly categorised as vector graphics editors, raster graphics editors.

In computer vision and image processing, a feature is a piece of information about an image's content. It often pertains to whether a certain section of the image possesses particular characteristics.

A feature image is a news image that provides more in-depth coverage for a news story or recent news story but has no compelling reason to appear alongside the top stories.

To know more about software  visit:-

https://brainly.com/question/985406

#SPJ1

The service model that requires service providers to install only operating systems and a few applications to deliver service to their consumers is the Infrastructure as a Service (IaaS) model.

Infrastructure as a Service (IaaS) is a cloud computing model in which service providers provide virtualized computing resources over the internet. In this model, the service providers provide their consumers with virtual servers, storage, networking, and operating systems, among other things, through the internet.

The consumers then manage and use these resources as though they were physical machines in their data centers. They do not own or maintain the underlying infrastructure, which is owned and operated by the service providers. Consumers have complete control over the virtual machines, operating systems, and applications that run on them, but they are responsible for the configuration, installation, and maintenance of these items.

Learn more about Infrastructure as a Service here: https://brainly.com/question/30282766

#SPJ11

TeamViewer is stuck at initializing display parameters because the display driver might be out of date or corrupted, and it might also occur when the graphics card is malfunctioning.

Follow the steps to resolve this problem:

1: Click on the Start button and select Device Manager from the search results.

2: Look for the Display Adapters option, expand it, and select your graphics card.

3: Right-click on your graphics card and choose Update Driver

4: Wait for the update to complete, then restart your computer to apply the changes.

1: Press Windows Key + X and select Device Manager from the list of options.

2: Look for the Display Adapters option, expand it, and select your graphics card.

3: Right-click on your graphics card and select Properties.

4: In the Properties window, select the Driver tab and click on the Roll Back Driver button.

5: Wait for the process to complete, then restart your computer to apply the changes.

1: Right-click on the TeamViewer icon on your desktop and select Properties.

2: In the Properties window, click on the Compatibility tab.

3: Check the box next to Disable display scaling on high DPI settings and Disable fullscreen optimizations.

4: Click on the Change high DPI settings button.

5: In the High DPI scaling override section, check the box next to Override high DPI scaling behavior. Scaling performed by Application and click on the OK button.

6: In the Compatibility tab, click on the Change settings for all users button

7: Repeat Steps 3 to 5 for all users and click on the Apply button, then the OK button.If none of the methods work, you should reinstall TeamViewer.

Learn more about Teamviewer at

https://brainly.com/question/30792076

#SPJ11

The program displays the item name, unit price per ounce, weight, and total price to the user.

Here is one possible implementation of the program in pseudocode:

// Input variables

DECLARE ItemName AS STRING

DECLARE PoundPrice AS FLOAT

DECLARE Pounds AS FLOAT

DECLARE Ounces AS FLOAT

// Output variables

DECLARE TotalPrice AS FLOAT

DECLARE UnitPrice AS FLOAT

// Gather input data

DISPLAY "Enter the name of the item: "

INPUT ItemName

DISPLAY "Enter the price per pound: "

INPUT PoundPrice

DISPLAY "Enter the weight in pounds and ounces (separated by a space): "

INPUT Pounds, Ounces

// Calculate data

DECLARE TotalWeight AS FLOAT

SET TotalWeight = (Pounds * 16) + Ounces

DECLARE TotalOunces AS FLOAT

SET TotalOunces = TotalWeight

SET UnitPrice = PoundPrice / 16

SET TotalPrice = TotalWeight * UnitPrice

// Display output data

DISPLAY "Item: " + ItemName

DISPLAY "Unit price: $" + FORMAT(UnitPrice, "0.00") + " per ounce"

DISPLAY "Weight: " + Pounds + "lb " + Ounces + "oz"

DISPLAY "Total price: $" + FORMAT(TotalPrice, "0.00")

The program first declares the necessary input and output variables. It then prompts the user to enter the item name, price per pound, and weight in pounds and ounces. The program calculates the total weight in ounces, the unit price per ounce, and the total price of the item based on the input data. Finally, the program displays the item name, unit price per ounce, weight, and total price to the user.

To know more about unit price visit:

https://brainly.com/question/15402847

#SPJ11

When we transmit data as a block of n rows of k bits per row and add parity bits to each row and each column, the given scheme detects all single errors. However, it doesn't detect all double errors and triple errors.

A block parity check is an error detection code that is designed to verify data transmission accuracy by introducing parity bits into data blocks. By comparing the parity of the received data with the transmitted data, an error in transmission can be detected.

For simplicity, let's assume that error occurs only in the data part and not in the parity part, and the block size is n rows of k bits per row.A single error will always be detected because it changes the parity of the row or column.

When two errors occur in a row or column, it will not be detected, but a double error occurring in two different rows or columns will be detected because it affects the parity of two rows or columns. However, a triple error occurring in three different rows or columns will not be detected.

Learn more about transmit data at

https://brainly.com/question/30356952

#SPJ11

To create and initialize the 2D list as shown, you can use the following code:

my_list = [["Account", "Grades", "Quizzes"],

          ["Miani", "Atlanta", "Dallas", "Los Angeles", "New York", "Chicago", "Portland", "Sacramento"]]

To print the list, you can define a function named printList() that takes the list as a parameter and prints it using nested loops, as shown below:

def printList(my_list):

   for i in range(len(my_list)):

       for j in range(len(my_list[i])):

           print(my_list[i][j], end=" ")

       print()

printList(my_list)  # call the function to print the original list

To flip the order of the cities in the list, you can define another function named fliporder() that takes the list as a parameter and reverses the order of each sublist containing cities using the reverse() method, as shown below:

def fliporder(my_list):

   for i in range(1, len(my_list)):

       my_list[i].reverse()

   printList(my_list)  # call the printList() function to print the flipped list

Learn more about program on:

https://brainly.com/question/26642771

#SPJ1

Answer:

The two ways to end the ISPF session are:

a. Press the F3 (Exit) key and enter "logoff" on the Primary Option Menu.

b. Enter the letter "X" on the command line of the ISPF Primary Option Menu or press the F12 (Cancel) key.

Explanation:

ISPF (Interactive System Productivity Facility) is a software application that provides a user-friendly interface for performing various tasks on a mainframe computer. To end an ISPF session, you can either press the F3 (Exit) key and enter "logoff" on the Primary Option Menu, or enter the letter "X" on the command line of the ISPF Primary Option Menu or press the F12 (Cancel) key. Option c is incorrect because entering the word "end" on the command line of the ISPF Primary Option Menu will not end the ISPF session. Option d is incorrect because pressing the F12 (Cancel) key alone will not end the ISPF session; you must also enter "logoff" on the Primary Option Menu.

Reading untagged document with assistive technology involves the use of software and hardware that is specifically designed to help people with disabilities such as visual or hearing impairments to access electronic documents.

Assistive technology is a general term that refers to products, devices, and equipment that are used to help people with disabilities perform tasks that they would otherwise be unable to do. Assistive technology includes devices such as screen readers, magnifiers, and alternative input devices that allow users to interact with electronic devices like computers, tablets, and smartphones.

While most electronic documents are created with the help of special software that can help to make them accessible to people with disabilities, sometimes documents are created without these special features. In these cases, people with disabilities may have difficulty accessing the information that is contained within the document. This is where assistive technology comes in – software and hardware that is designed to help people with disabilities access information that they would otherwise be unable to read.

Learn more about Assistive technology:

https://brainly.com/question/13762621

#SPJ11

Answer:Synchronous Dynamic Random Access Memory

Explanation:

A Virtual Local Area Network (VLAN) allows individuals to set up and organize different networks based on their specific needs. VLANs are a type of network technology that enables the creation of multiple virtual networks within a single physical network.

This allows individuals to group devices together based on specific criteria, such as location, department, or function, and to apply specific network settings and security protocols to each group. VLANs provide greater flexibility and control over network management, as they allow for the creation of virtual networks that can be tailored to the needs of specific users or applications. Additionally, VLANs can be configured to span multiple physical locations, making them a useful tool for managing networks across multiple sites.

Find out more about Virtual Local Area Network (VLAN)

brainly.com/question/14291365

#SPJ4

Spelling a keyword (such as while or if) with a capitalized first letter is not an error (either a syntax error or a logic error).

Syntax errors are mistakes made by programmers when writing computer code. They are errors in the syntax, spelling, or punctuation of the code. Syntax errors can stop your code from working or make it produce unexpected results.

Logic errors are mistakes made by programmers when they misunderstand the requirements for a program. They are errors that produce an unexpected result, rather than a syntax error that stops the program from running.

Types of programming errors include:

Syntax errors stop your code from running, while runtime errors are caused by problems with your code at runtime. Logic errors are the most challenging to detect and fix, as they involve correcting the logic of the code rather than fixing the syntax.

Spelling a keyword (such as while or if) with a capitalized first letter is not an error (either a syntax error or a logic error).Thus, the correct option is "spelling a keyword (such as while or if) with a capitalized first letter."

Learn more about syntax error at

https://brainly.com/question/28957248

#SPJ11

Answer:

A brute-force attack is a method of hacking that involves trying every possible combination of characters until the correct one is found. This method can be time-consuming and resource-intensive, but it can be effective against weak passwords or encryption.

Explanation:

The pseudocode to ARM assembly language, and the logical operator used in the if was "==", you would use the BEQ branch following the cmp instruction.

Pseudocode typically uses a combination of statements and structures from a particular programming language along with natural language descriptions that provide insight into the code's intent. The BEQ instruction stands for Branch if Equal.

The branch instruction is used to jump to a new location in the code, which is specified as an offset (a value added to the current program counter) from the current location. The BEQ instruction can be used to compare the value of a register or memory location with a constant value.

Learn more about BEQ instruction: https://brainly.com/question/15582956

#SPJ11

Answer:

structured query language

Explanation:

Answer:

#include <stdio.h>

int main(void) {

 int number1, number2;

 printf("Please enter two positive integers: ");

 scanf("%d %d", &number1, &number2);

 if (number1 % number2 == 0) {

   printf("Divisible\n");

 }

 else {

   printf("Not divisible\n");

 }

 return 0;

}

The program for find the shipping cost is:

$", shipping_cost(weight)) ```

To create a program that calculates the shipping cost based on the number of pounds, you can use the following Python code:

```python def shipping_cost(weight): if weight <= 5: cost = weight * 1.20 else: cost = 5 * 1.20 + (weight - 5) * 1.30 return cost #

Example usage:

weight = float(input("Enter the weight of the package in pounds: ")) print("

The shipping cost is:

$", shipping_cost(weight)) ```

This program uses a function called `shipping_cost` to calculate the shipping cost based on the given weight rules. It then takes the weight input from the user and prints the calculated shipping cost. l

Learn more about programming language at

https://brainly.com/question/23959041

#SPJ11

The assertion made is accurate. A call to a value-returning function is always a part of an expression, whereas a call to a none (void) function is always a statement on its own.

To learn more about the value-returning function, refer to:

https://brainly.com/question/14606550

An approach concerned with the efficient and environmentally responsible design, manufacture, operation, and disposal of IS-related products is known as green computing. The correct answer is option a.

Green computing is an approach concerned with the efficient and environmentally responsible design, manufacture, operation, and disposal of IS-related products. This refers to the use of computing resources in an environmentally responsible manner by minimizing the use of non-renewable resources, maximizing energy efficiency, and ensuring the recyclability of electronic goods.

To put it another way, green computing is the use of environmentally sustainable practices in computing to reduce the impact on the environment. Its objective is to make computers and their related activities more environmentally friendly. In addition, green computing practices can be implemented at all levels of the computing environment, from design to disposal.

Learn more about Green computing here: https://brainly.com/question/22879179

#SPJ11

A. Causes harm in the body is not an importance of fungi. While some fungi can be harmful to human health, many others are important for various reasons, such as making medicine, serving as food sources, and contributing to the ecosystem by breaking down organic matter. Fungi are also used in various industries, such as baking, brewing, and agriculture.

Common input devices include the keyboard, mouse, and integrated video cameras. The speaker and printer are output devices rather than input devices. So, the correct option is b.

Input devices are devices that take data from the user or other devices and pass it on to the processor for processing. Input devices, as the name implies, are used to insert data and instructions into the computer. The following are the most prevalent input devices:

The majority of laptops and phones come with built-in cameras that can be used as input devices to capture images or video. A microphone is used to record sounds, speeches, and other sounds. It is utilized in a variety of settings, such as conferences, lectures, and interviews.

A touch screen is a screen that you can touch to input data. It is most commonly found on smartphones and tablets.

You can learn more about input devices at: brainly.com/question/13014455

#SPJ11

The correct option is b) parallel as users may have to enter data into multiple systems to compare the outputs.

The parallel implementation is the implementation of the new system, while the old system is still in operation. It allows users to use the new system and also to compare the results from the old system. Because both systems run at the same time, parallel implementation is the most expensive type of implementation. In some situations, parallel implementation can be utilized, such as when the new system is critical to the company's success and cannot be permitted to fail.

In this type of implementation, users may have to enter data into multiple systems to compare the outputs. Hence, the correct option is b) parallel.

You can learn more about implementation at: brainly.com/question/30026707

#SPJ11

A Line sparkline displays a green block for values that are increasing and a red block for values that are decreasing. Sparklines can have data markers added to them to show where the high and low points are in the chart.

A sparkline is a small chart that shows data visually in a cell of a worksheet. Sparklines can be used to highlight maximum and minimum values, seasonal changes in values, economic cycles, or other trends in a series of values.

Click Sparklines on the Insert tab, then select the desired type of sparkline. The first box in the Insert Sparklines dialog box already contains the selection you made in step 1. Choose the cell or range of cells on the sheet where you want to place the sparklines.

To learn more about sparklines visit :

https://brainly.com/question/3308461

#SPJ1

Answer:

Explanation:

This is an example of a python function that can calculate the total area of a 2D figure, including circles, rectangles, and triangles, using conditionals.

To create a formula in cell B8 that multiplies the value in cell B7 by the value in cell B6 and then adds the value in B7 without using a function, follow these steps:

Click on cell B8 Type "=" to start the formula.Click on cell B7 and type "*".Type "$B$6" to create an absolute reference to row 6.Type "+" and click on cell B7 again.Press Enter to complete the formula.The formula in cell B8 should look like this:  =B7*($B$6)+B7  To copy the formula from cell B8 to the range B9:B11, select cell B8, hover over the bottom-right corner of the cell until the cursor turns into a plus sign, and then drag down to cell B11.To copy the formulas from the range B8:B11 to the range C8:H11, select the range B8:H11, hover over the bottom-right corner of the selection until the cursor turns into a plus sign, and then drag down to row 11. This will copy the formulas while adjusting the cell references accordingly.

To learn more about function click on the link below:

brainly.com/question/24084476

#SPJ4