Answer:
C
Explanation: I mL = 1 cm3 and 1 L = 1000 mL so 1 L - 1000 cm3
Answer:
d
Explanation:
A solid ball has a mass of 50 grams and a volume
of 20 cm? What is the ball's density?
Answer:
Density = 50 / 20 = 2.5 gram/ cm^3
Explanation:
Answer is 2.5 grams/ cm^3
Example of balanced force
It would be A since a balanced force would stay the same.
A rectangular swimming pool has the dimensions of 26m long, 4m wide, and 2.5 m deep (high). The density of the water in the pool is 1.62 g/m3. What is the mass of the water in the pool? (hint: volume of a rectangle is L x w x h) Show your work!
Answer:
[tex]m=421.2g[/tex]
Explanation:
Hello.
In this case, we first compute the volume of the pool via:
[tex]V=L*W*H\\\\V=26m*4m*2.5m\\\\V=260m^3[/tex]
Then, since the density is defined as the mass divided by the volume, we compute the mass as follows:
[tex]\rho=\frac{m}{V}\\ \\m=\rho*V\\\\m=1.62g/m^3*260m^3\\\\m=421.2g[/tex]
Best regards.
Definition of reactant
Noun
a substance that takes part in and undergoes change during a reaction.
What would happen if they had no sunlight???
Answer plants will die and with out plants we will die
Explanation:
Use the perfodic table to fill in the table below.
Element
Group Name
Charge
# of Valence
Electrons
# of Energy
Levels
One Element
with similar
Properties
Boron
Akaline Earth
Metals
Fluorine
1
5
Tin
Sulfur
Krypton
3
Arsenic
lodine
Potassium
5
Thallium
Answer:
charge
# of Valence
Electrons
# of Energy
Explanation:
gaseous butane (CH3(CH2)2CH3) will react with gaseous oxygen (O2) to produce carbon dioxide (CO2) and gaseous water (H2O). suppose 1.16 g of butane is mixed with 7.6 g of oxygen. calculate the minimum mass of butane that could be left over by the chemical reaction. round your answer to 2 significant digits.
We are given the equation:
2C4H10(g)+13O2(g)→8CO2(g)+10H2O(g)
we are also given that 1.16 grams of butane and 7.6 grams of oxygen are used in this reaction
Moles of Butane provided in the reaction:
Molar mass of butane = 58 g/mol
Number of moles = given mass / molar mass
Number of moles = 1.16 / 58
Number of moles = 0.02 moles
Moles of Oxygen provided in the reaction:
Molar mass of oxygen = 16 g/mol
Number of moles = given mass / molar mass
Number of moles = 7.6 / 16
Number of moles = 0.475 moles
Finding the Limiting reagent:
Since the number of moles of Butane is less that of oxygen, butane is the limiting reagent
So, number of moles of Oxygen used = Number of moles of Butane * 13/2
Number of moles of O2 used = 0.02 * 13/2 = 26 / 200 = 0.13 moles
Since Butane is the limiting reagent, the mass of butane left over is 0 grams
rounding to 2 significant digits: 00 grams of Butane
Which is the function of space observatory technology?
classify objects in space
collect soil and rock samples
carry astronauts and equipment
capture panoramic surface images
Answer:
A
Explanation:
Classify objects in space
Answer:
its A
Explanation:
just did it
How many moles are in 3.48 x 1024 particles of lithium ?
Answer:
5.78 mol Li
Explanation:
Step 1: Define
Avagadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.
Step 2: Use Dimensional Analysis
[tex]3.48(10)^{24} \hspace{3} particles \hspace{3} Li(\frac{1 \hspace{3} mol \hspace{3} Li}{6.02(10)^{23} \hspace{3} particles \hspace{3} Li} )[/tex] = 5.78073 mol Li
Step 3: Simplify
We have 3 sig figs.
5.78073 mol Li ≈ 5.78 mol Li
If a sample of silver is reduced to the smallest possible particle of pure silver, which statement would most accurately describe the result?
A.The sample would be reduced to an atom of silver.
B.The sample would be reduced to molecules of silver.
C.The sample would be reduced to protons and neutrons of silver.
D.The sample would be reduced to electrons and protons of silver.
If it requires 67 J of heat to raise the temperature of a piece of iron by 5.0°C, calculate the mass of the iron. The specific heat of iron is 0.46 J/g·°C.
Explanation:
E= m.c. delta T
67 = m . 0.46. 5
m = 67/(0.46*5)
m = 67/2.3
m= 29.13 g
You are given a bottle of impure CoSO4 7H2O which is thought to be 74.4% by weight CoSO4 7H2O. You propose to run your own analysis to find out. What weight of sample should you take to get 0.345 g of BaSO4?
Answer:
ggv DDT gnrh h
Explanation:
assssssssassfggg
Answer the following questions from section 1.1. Everyone's ebook should work now, please use it. Again, to access your ebook, go to jway. Look for the red connectED McGraw Hill Education icon. Click it. Click the blue launch button on the book that pops up. Look for the green ebook button on the right of the page, click it. Now you can press the buttons on the left and right to navigate through the book. If you click the button in the far upper left corner that looks like pages on a book, this will give you a drop down menu of each section. Click the drop down arrow on unit 1. Click the drop down arrow on chapter 1. Scroll down and find the lesson 1.1 Earth's Interior. Now press the arrows to the left and right to flip through section 1.1.
Answer the following questions from 1.1.
1. What are the 3 layers of the earth?
2. In your own words, describe an earthquake.
3.What is the least dense and most dense layer of Earth, and why?
4. What are the 2 types of crust of Earth?
5.What are the 2 types of earthquake waves? Which waves are fastest?
6. What is an indirect observation?
7. What are the four layers of the mantle?
8. Why is the outer core liquid but the inner core solid?
1)The earth is made up of three different layers: the crust, the mantle and the core.
2) I think an earthquake is when the tectonic plates form together and progress movement which cause floor shakiness and everything falls.
3) Earth's interior layers are ordered by density. The densest layer is the solid metal inner core, the mantle is of intermediate density, and the least dense layer is the lithosphere, particularly the continental lithosphere.
4) Earth's crust is divided into two types: oceanic crust and continental crust.
5)Surface waves travel along the surface. There are two types of body waves: P-waves travel fastest and through solids, liquids, and gases; S-waves only travel through solids. Surface waves are the slowest, but they do the most damage in an earthquake.
6)Indirect observation involves the analysis of textual material generated either indirectly from transcriptions of audio recordings of verbal behavior in natural settings or directly from narratives.
7)The mantle is divided into several layers: the upper mantle, the transition zone, the lower mantle, and D” , the strange region where the mantle meets the outer core.
8)The outer core is not under enough pressure to be solid, so it is liquid even though it has a composition similar to the inner core. Sulfur and oxygen could be present in the outer core.
Halley’s Comet is a comet that passes close to earth every 75 years. Based on the passage , which gravitational attraction has the most influence on the movement of this astronomical object?
Answer:
Attraction between the comet and the Sun
Explanation:
A property that makes some objects float in water?
Answer:
Density
Explanation:
some objects are less dense so e.g balloons, they stand more chance of floating on water than other objects that have more density
5. Which organelle, found in plant and
animals cells, can store wastes and
protect the cell from contamination?
Using the evidence provided, generate a pattern that describes the chemical reactivity of metals.
A
As you go from left to right, reactivity of metals increases. As you go down in a group, reactivity of metals increases.
B
As you go from left to right, reactivity of metals increases. As you go down in a group, reactivity of metals decreases.
C
As you go from left to right, reactivity of metals decreases. As you go down in a group, reactivity of metals increases.
D
As you go from left to right, reactivity of metals decreases. As you go down in a group, reactivity of metals decreases
Answer:
B)As you go from left to right, reactivity of metals increases. As you go down in a group, reactivity of metals decreases.
Explanation:
reactivity of metals can be explained as how it can easily lose electron, i.e oxidize as well as reaction with non-metals.
There are factors that influence the reactivity of metals such as
1)atomic radius
2)nuclear charge
3)shielding effect
4) The sublevel arrangement of electrons
In the periodic table,the group 1, known as alkali metals, are the most reactive metals
Therefore, as we from left to right, reactivity of metals increases. As we move down in a group, reactivity of metals decreases.
which objects would have a greater gravitational force between them, Objects A and B, or Objects B and C? PLEASE HELPPP
Answer:
hmm:
Explanation:
Unless I am crazy, there should be an image attached to this. But, you can use this formula:
[tex]F = G\frac{m_1m_2}{r^2}[/tex] where F is the force, G is a constant, m1 and m2 are the masses of the objects, and r is the distance between the objects.
2. If you had a glacier and an ice cube, how would the melting points of both differ?
Answer:
No
Explanation:
A golden nugget displaces 89.60 mL of water when submerged. If the density of gold is 19.32 g/cm² what is the mass of the nugget
Answer:
The answer is 1731.1 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question
density = 19.32 g/cm³
1 mL = 1 cm³
89.60 mL = 89.60 cm³
volume = 89.60 cm³
So we have
mass = 19.32 × 89.60 = 1731.072
We have the final answer as
1731.1 gHope this helps you
How many grams are in 0.005 moles of lead (IV) sulfate, Pb(SO4)2 Group of answer choices 1.5 g 502.74 g 0.0045 g 1.996 g
Answer:
[tex]m_{Pb(SO_4)_2}=1.996 g[/tex]
Explanation:
Hello.
In this case, given the formula of the lead (IV) sulfate, we can compute its molar mass as shown below:
[tex]M_{Pb(SO_4)_2}=m_{Pb}+2*m_S+2*4*m_O\\\\M_{Pb(SO_4)_2}=207.2+2*32+2*4*16\\\\M_{Pb(SO_4)_2}=399.2g/mol[/tex]
Thus, by applying the following mole-mass relationship, we obtain the mass of 0.005 moles of lead (IV) sulfate:
[tex]m_{Pb(SO_4)_2}=0.005mol*\frac{399.2g}{1mol} \\\\m_{Pb(SO_4)_2}=1.996 g[/tex]
Best regards.
Luster, conductivity, and malleability are physical properties of metals. What makes these properties different from chemical properties?
A. Physical properties relate to elements rather than compounds.
B. Physical properties appear only after a chemical change occurs.
C. Physical properties can be observed without attempting to change the identity of the substance.
D. Physical properties describe elements in the solid state rather than in the liquid or gas state.
Answer:
C
Explanation:
A Is false because physical properties can relate to any chemical substance.
B Is false because physical properties are apparent wether a chemical change has occurred or not.
C Is correct because physical properties can be observed without making a chemical change to the substance, chemical properties cause physical properties but a chemical change is not needed to observe a physical property.
D Physical properties describe compounds in all phases of matter.
Metalloids exhibit a combination of localized and delocalized bonding. How does this relate to the properties of metalloids?
Answer:
The combination of localized and relocated connections is what allows the metalloid to be a transitional element between a metal and a non-metal. With that, it manages to be a solid and shiny element, but brittle.
Explanation:
A metalloid is also called ametal and has intermediate characteristics between metal and non-metal elements. they are characterized as solid, shiny, brittle and good idolizers of temperature and electricity, however, they assume the characteristics that metals present in relation to conductivity when they are heated. This is because the increase in temperature makes the electrons connected by weak bonds become free, making them semiconductors.
A brick has the mass of 555g and volume of 250cm3. what is the density of the brick
Answer:
The answer is 2.22 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 555 g
volume = 250 cm³
We have
[tex]density = \frac{555}{250} = \frac{111}{50} \\ [/tex]
We have the final answer as
2.22 g/cm³Hope this helps you
At room temperature, the element bromine is a liquid with a density of 3.12 g/mL.
a Calculate the mass of 542 mL of bromine.
Mass = blank g
b What volume does 60.0 g of bromine occupy?
Volume =
mL
Answer:
A. 1691.04 g
B. 19.23 mL
Explanation:
The following data were obtained from the question:
Density of bromine = 3.12 g/mL.
A. Determination of the mass of bromine.
Density of bromine = 3.12 g/mL.
Volume of bromine = 542 mL
Mass of bromine =?
Density = mass /volume
3.12 = mass /542
Cross multiply
Mass of bromine = 3.12 × 542
Mass of bromine = 1691.04 g
B. Determination of of volume of bromine.
Density of bromine = 3.12 g/mL.
Mass of bromine = 60 g
Volume of bromine =...?
Density = mass /volume
3.12 = 60 / volume
Cross multiply
3.12 × volume = 60
Divide both side by 3.12
Volume of bromine = 60/3.12
Volume of bromine = 19.23 mL.
The answer to both solution is as follows:-
1691.04 g 19.23 mL
All the data is given in the question,
Density of bromine = 3.12 g/mL. Volume of bromine = 542 mL
The formula we will use is as follows:- [tex]Density = \frac{mass}{volume}[/tex]
[tex]Mass of bromine = 3.12 * 542[/tex] = 1691.04 g
Hence, the mass of the bromine is 1691.04g
The volume of bromine = [tex]\frac{60}{3.12}[/tex]
The volume of bromine is 19.23mL.
Hence, the mass and the volume are 1691.4g and 19.23ml.
For more information, refer to the link:-
https://brainly.com/question/22810476
Shown here is the chemical formula for ammonia.
N H
NH,
The 3 in the chemical formula for ammonia means that there are
three-
А
atoms of ammonia
B
molecules of ammonia.
с
atoms of hydrogen in each molecule.
D
atoms of nitrogen in each molecule.
Answer:
Explanation: Ammonia is made out of one nitrogen and three hydrogen atoms. Its structure is tetrahedral. Ammonia is used in nitric acid production, as a fertilizer, and a cleaning solution.
NH3, normally found as a gas, it is caustic and harmful in longterm exposure. NH3 has a boiling point of -33 Celsius, and must be stored under pressure, or at low temperatures.
Ammonia is regulated in the United States as a substance that is a non-flamable gas. However, it still meets the definition of a material that is toxic by inhalation and requires a hazardous safety permit.
Ammonia is usually a gas with a pungent odor. Ammonia used commercially is usually named anhydrous ammonia. An exposure to a very high concentration of ammonia could result in lung damage and death
Ammonia is a gas with a strong smell. Its chemical formula is NH3. If exposed to a very high concentration of ammonia, it can cause lung damage and death.
Ammonia, NH3, is a compound that is has a strong smell. Even though the gas helps the nutrition of our planet, it can cause serious problems to our health.
Ammonia, NH3, is a pungent gas. It is colorless, and used to manufacture fertilizers and
The three in the chemical formula for ammonia means that there are three atoms of hydrogen in each molecule. The correct option is c.
What is ammonia?Ammonia is a material that is classified in the US as a non-flammable gas. It nevertheless satisfies the criteria for a substance that is dangerous when inhaled and necessitates a hazardous safety permit.
Three hydrogen atoms and one nitrogen atom combine to form ammonia. It has a tetrahedral structure. Ammonia is a fertilizer, a cleaning agent, and is used in the manufacturing of nitric acid.
NH3 is typically found as a gas and, when inhaled over time, is corrosive and dangerous. NH3 must be stored under pressure or at low temperatures because it has a boiling point of -33 degrees Celsius.
Therefore, the correct option is c. atoms of hydrogen in each molecule.
To learn more about ammonia, refer to the below link:
https://brainly.com/question/15409518
#SPJ2
Extra points!
Classify each of the following as a physical change or a chemical change.
grinding glass:
rusting of iron:
burning a candle:
sanding wood:
Grinding of glass sanding of wood are physical changes. Rusting of iron and burning candle are chemical changes.
What are chemical changes ?Chemical changes involves the formation or breaking of chemical bonds that leads to a new product. Whereas, physical changes does not involves any change in chemical bonds. Phase change, change in size, shape etc. are physical changes.
Grinding glass will does not make any change in chemical bonds of glass materials . Just their size gets reduces and forms their dust particles. Thus, it is a physical change. Sanding the wood also a physical change.
Rusting of iron is the formation of red iron oxide by the reaction of iron with oxygen from air or water. This oxide will spread over the surface of the metal and eventually gets corroded. This is a chemical change where a new product is formed.
Find more on physical changes:
https://brainly.com/question/17931044
#SPJ2
Why can certain things only be turned into certain other things? For example, if you mixed flour, sugar, eggs, and other ingredients, you will not make gold. You will not make rubber, or diamond, or straw either. Why not? In the following space, explain why someone cannot make gold by mixing flour, sugar, and eggs.
Answer:
You cannot make gold with bakery ingredients as gold is made with hydrogen and helium. Not everything follows the same recipe as some objects. There are different recipes for each material which makes sense because minerals aren't made of wheat. Those minerals feel like stone and act like stone, so it wouldn't be logical if it was crafted with flour, sugar and eggs.
Hope this helps.
Gold is a metal of higher value. It cannot be made by simply mixing any substance. Because every substance is made of its own atoms or molecules and it cannot be recreated by other atoms.
What is gold?Gold is 79th element in periodic table. It is a transition metal placed in d-block elements. Gold is a precious metal have been used in ornaments and other coatings.
Metals are hard, and they have some peculiar properties such as ductility, malleability. metallic luster etc. Gold is hard, shiny malleable and ductile and thus it can be easily modified into desired shapes and size.
Every substance is made of its own atoms and molecules. Gold is made of its atoms similarly, silver is made of its own atoms. In such a way everything is made by their characteristics atoms which cannot be recreated from other substances. It can only be produced from its minerals and ores.
Hence, gold cannot be produced from materials like rubber, strew ether etc.
To find more about gold, refer the link below:
https://brainly.com/question/14669985
#SPJ2
Name:
1. Draw the Lewis Dot diagram for the molecule AB2C. Element A has 4 valence electrons
and requires a full octet. Element B has 1 valence electron, but only gets 2 valence
electrons to have a full outer shell. Element C has 6 valence electrons and needs
to
have 8 valence electrons for a full octet.
Identify the chane name for the molecule
Answer:
See attached picture and explanation.
Explanation:
Hello!
In this case, given the instruction on the molecule, we can infer that A is the central atom as it must have a full octet which is reached via one bond with each B atom. Moreover, via a double bond with C, both A and C are able to have the required full octet as shown on the attached picture.
For the name, it looks like the formaldehyde ([tex]CH_2O[/tex]) which has two single-bonded hydrogen atoms and one double-bonded oxygen atom in order to have a full octet forth both carbon and oxygen.
Regards.
Rational numbers are?
✅The racial numbers are all the numbers that can represent as the quotient of two numbers enter or, more precisely, an entity and a natural positive; The term "racial" refers to a fraction or part of a whole.
IamSugarBee