the ka for formic acid (hco2h) is 1.8 ⋅ 10−4 . what is the ph of a 0.10 m aqueous solution of sodium formate (nahco2)? 4.26 5.63 11.64 3.39 8.37

Answer:

d) linear

Explanation:

The chemical formula of acetylene is H−C≡C−H. Here carbon atoms, as well as hydrogen atoms, lie along a line and each H−C−Cand C−C−Hbond angle is 1800. Thus acetylene has a linear structure.

The pH at the equivalence point is 9.36.

At the equivalence point, all of the HNO₂ will have reacted with an equal amount of NaOH, forming NaNO₂ and H₂O. Since NaNO₂ is a salt of a weak base (NO₂⁻) and a strong alkali metal cation (Na⁺), the solution will be basic. The pH at the equivalence point can be calculated using the equation:

pH = pKb + log([NaNO₂]/[HNO₂])

The pKb of NO₂⁻ is 4.64, so:

pH = 14 - pOH = 14 - 4.64 = 9.36 (at equivalence point)

At the equivalence point, the concentration of NaNO₂ will be equal to the concentration of the original HNO₂ solution, which is 0.175 M. The concentration of HNO₂ at the equivalence point will be zero, since all of it has reacted with NaOH. Therefore:

pH = 9.36 + log(0.175/0) = 9.36

To know more about equivalence point click on below link:

https://brainly.com/question/31375551#

#SPJ11

The coefficient in front of Pb is 1, and the coefficient in front of H⁺ is 2.

We need to identify the oxidation states of each element in the reaction. Pb starts at +2 in Pb₂+, and ends at 0 in Pb. N starts at +5 in NH⁺⁴, and ends at +3 in NO⁻³. We balance the equation by making sure that the total charge on both sides of the equation is the same. To balance the charges, we add electrons to the appropriate side of the equation.

Pb₂+(aq) + NH⁺⁴(aq) + 2e⁻ → Pb(s) + NO⁻³(aq)

Now we need to balance the number of atoms on each side of the equation. We balance the nitrogens and oxygens by adding H⁺ and H₂O to the appropriate side.

Pb₂+(aq) + NH⁺⁴(aq) + 2e⁻→ Pb(s) + NO⁻³(aq) + 4H⁺(aq)

We balance the hydrogens by adding an equal number of H⁺ to the other side of the equation.

Pb₂⁺(aq) + 2H⁺(aq) + NH⁺⁴(aq) + 2e⁻→ Pb(s) + NO⁻³(aq) + 4H⁺(aq)

The coefficient before Pb is 1, whereas the coefficient before H⁺ is 2.

To know more about the Redox reaction, here

https://brainly.com/question/14152531

#SPJ4

Answer:

Scientist were initially interested in figuring out the structure of the atom so they could split the nucleus, build and atomic bomb, and beat the German and Japanese in World War II.

Explanation:

pls mark brainliest :)

Acid rain results when humans put excess amounts of sulfur dioxide (SO2) and nitrogen oxides (NOx) into the atmosphere.

These pollutants are released primarily from industrial processes and the burning of fossil fuels, which then react with water, oxygen, and other chemicals to form sulfuric acid and nitric acid. These acids then fall to the ground in the form of precipitation, known as acid rain.

Any type of precipitation that contains acidic elements, such as sulfuric or nitric acid, that falls to the ground from the atmosphere in wet or dry forms is referred to as acid rain, also known as acid deposition. This can apply to rain, snow, fog, hail, and even corrosive dust.

More on Acid rain: https://brainly.com/question/30271624

#SPJ11

Answer:

The standard reaction free energy of the reaction 2NH3(g) – N2H4(g) + H2(g) is +224 kJ/mol.

Explanation:

The standard reaction free energy ΔG° can be calculated using the following equation:

ΔG° = ΣnΔG°f(products) - ΣmΔG°f(reactants)

where n and m are the stoichiometric coefficients of the products and reactants, respectively, and ΔG°f is the standard free energy of formation.

The standard free energy of formation for NH3(g) is -16.5 kJ/mol, and for N2H4(g) and H2(g) it is 95.5 kJ/mol and 0 kJ/mol, respectively.

Using these values, we can calculate ΔG° for the reaction:

ΔG° = (2 × 95.5 kJ/mol + 0 kJ/mol) - (1 × -16.5 kJ/mol × 2)

     = 191 kJ/mol + 33 kJ/mol

     = 224 kJ/mol

Therefore, the standard reaction free energy of the reaction 2NH3(g) – N2H4(g) + H2(g) is +224 kJ/mol.

To learn more about free energy refer here:

https://brainly.com/question/15319033#

#SPJ11

According to collision theory, the increase in the rate constant with increasing temperature is primarily due to the fact that the fraction of collisions that have sufficient energy to react increases with increasing temperature. As the temperature increases, the molecules gain more kinetic energy, which means they move faster and collide more frequently.

When these collisions occur with enough energy, they can overcome the activation energy barrier and result in a successful reaction.

While the heat change for most reactions is negative, meaning that energy is released during the reaction, this does not necessarily contribute to the increase in the rate constant. Additionally, the fraction of collisions that have the proper orientation for reaction may also increase with increasing temperature, but this is not the primary factor that drives the increase in the rate constant.

It is important to note that the pressure of the reactants does not have a direct impact on the rate constant, although it may affect the frequency of collisions. The activation energy does decrease with increasing temperature, but this is not the primary reason for the increase in the rate constant.

Overall, the primary factor that drives the increase in the rate constant with increasing temperature is the increase in the fraction of collisions that have sufficient energy to react. This underscores the importance of temperature in chemical reactions and highlights the role of collision theory in understanding reaction rates.

learn more about collision theory here: brainly.com/question/14287919

#SPJ11

The addition of small amounts of dyes to the emulsion lowers the minimum energy needed to initiate the process of dissociation of the silver-salt molecule, making the emulsion more sensitive to photons with shorter wavelengths and higher energy.

When dyes are added to the emulsion, they act as sensitizers that lower the activation energy required to initiate the dissociation of the silver-salt molecule. This means that the emulsion becomes more sensitive to photons with shorter wavelengths and higher energy, as these photons have the ability to provide the minimum energy required to dissociate the molecule. In other words, the addition of dyes to the emulsion expands the range of light that can be detected by the emulsion.

learn more about emulsion

https://brainly.com/question/6711819

#SPJ11

In the electrochemical cell: Zn(s) | Zn²⁺ (aq) || Ag+(aq) | Ag(s), the anode is Zn(s). This is because the anode is the electrode where oxidation occurs, and in this cell, Zn(s) is oxidized to Zn²⁺(aq).

Let us discuss this in detail.

1. In an electrochemical cell, the anode is the electrode where oxidation occurs.
2. Oxidation involves the loss of electrons.
3. In this cell, Zn(s) is oxidized to Zn²⁺(aq) by losing 2 electrons: Zn(s) → Zn²⁺(aq) + 2e⁻.
4. Since Zn(s) is undergoing oxidation, it is the anode in this electrochemical cell.

Learn more about electrochemical cells at https://brainly.com/question/10470515

#SPJ11

Li₂CO₃ is lithium carbonate. It is a medication used as an antidepressant, mood stabilizer, and antipsychotic drug.

Lithium carbonate (Li₂CO₃) is a medication commonly used to treat bipolar disorder, a mental illness characterized by episodes of depression and mania. It can also be used to treat other psychiatric conditions, such as major depressive disorder and schizophrenia.

Lithium carbonate works by altering the levels of certain brain chemicals, such as serotonin and norepinephrine, which play a crucial role in regulating mood. By stabilizing these chemicals, lithium can reduce the severity and frequency of mood swings in individuals with bipolar disorder.

To learn about lithium carbonate

https://brainly.com/question/31465235

#SPJ4

In general, Period 3 elements are less reactive than elements in earlier periods and become increasingly less reactive as one moves from left to right across the periodic table.

In the periodic table, there are eighteen groups and seven periods. It mainly has four blocks which are s, p, d and f block elements. The non-metals are present in p block. In period 3, the elements are low in reactivity  in comparison to elements belonging to the period 2. These elements increasingly become less reactive as one moves from left to right across the periodic table. Argon that belongs to period 3 is the highly reactive element belonging to this period, it is a noble gas that is placed in the last group, group 18.

To learn more about periodic table check the link below-

https://brainly.com/question/15987580

#SPJ4

The term mole concept is used here to determine the moles of copper. It is the convenient method for expressing the amount of the substance. The number of moles of copper in 564 grams is  8.87 moles.

One mole of a substance is defined as that quantity of it which contains as many entities as there are atoms exactly in 12 g of carbon - 12. The formula used to calculate the number of moles is:

Number of moles = Given mass / Molar mass

Molar mass of copper = 63.55 g / mol

Number of moles = 564 / 63.55 = 8.87 moles

To know more about mole concept, visit;

https://brainly.com/question/19730733

#SPJ1

The balanced net ionic equation for this reaction is:
Mg(s) + 2 Ag⁺(aq) ->  Mg²⁺(aq) + 2Ag(s)

To set up this cell, we need to identify the half-reactions for each electrode. When the Mg electrode is placed in the aqueous  Mg²⁺ solution and the Ag electrode is placed in the aqueous  Ag⁺ solution, a redox reaction occurs. The Mg atoms lose two electrons and become  Mg²⁺ ions, while the  Ag⁺ ions gain electrons and become Ag atoms. This process is facilitated by the salt bridge, which allows the transfer of ions to maintain charge balance.
The balanced net ionic equation shows the species that participate in the redox reaction, excluding spectator ions that do not undergo any change. In this case, the Mg²⁺ and Ag⁺ ions are the spectator ions. The physical states of the species are also included to indicate whether they are in solid, liquid, or aqueous form.

The overall reaction can be represented as:
Mg(s) + 2 Ag⁺(aq) + 2Cl⁻(aq) -> Mg²⁺(aq) + 2Ag(s) + 2Cl⁻(aq)
where Cl⁻ ions are used as the anions in the salt bridge to balance the charges.

Learn more about electrode here:

https://brainly.com/question/17060277

#SPJ11

The galvanic cell that is set up is a half-cell reaction involving the oxidation of silver and the reduction of chromium.

A galvanic cell, also known as a voltaic cell, is an electrochemical cell that converts chemical energy into electrical energy. It consists of two different metals that are placed in an electrolyte solution. When the two metals come into contact, a reaction occurs that causes electrons to flow from one metal to the other. This flow of electrons generates an electric current. Galvanic cells are used to generate electricity in many applications, including batteries, fuel cells, and solar cells.

The Ag(s) electrode is the anode, and the Cr(s) electrode is the cathode. Electrons flow from the anode to the cathode, and the Ag+ ions from the anode solution will migrate to the cathode to be reduced back to silver metal. The Cr3+ ions from the cathode solution will migrate to the anode to be oxidized to chromium metal. The voltage that is measured by the voltmeter will be positive, indicating that the cell is producing an electric current.

To learn more about galvanic cell

https://brainly.com/question/29765093

#SPJ4

The statement is false because the plateau phase in ventricular action potentials is due to the influx of calcium ions, not the other way around.

The plateau phase in action potentials recorded from ventricular fibers is due to the influx of calcium ions ([tex]Ca^{2+}[/tex]), along with some outward potassium ([tex]K^{+}[/tex]) currents, and the decrease in inward sodium ([tex]Na^{+}[/tex]) currents. This combination of ion currents produces a prolonged depolarization phase, which is important for the coordinated contraction of the ventricles during the cardiac cycle.

During the initial depolarization phase of the action potential, voltage-gated sodium channels open, allowing a rapid influx of Na+ ions into the cell, leading to depolarization. As the membrane potential reaches around 0 mV, these sodium channels begin to inactivate, and voltage-gated potassium channels open, leading to rapid repolarization.

However, in ventricular cells, at the same time, voltage-gated calcium channels open, leading to a slow influx of [tex]Ca^{2+}[/tex] ions, which counteracts the outward potassium currents and helps maintain the plateau phase of the action potential. This prolonged plateau phase is critical for the synchronous contraction of the ventricles, which is necessary for effective pumping of blood out of the heart.

To know more about Ventricular Fibres:

https://brainly.com/question/31563011

#SPJ11

The correct mathematical expression for finding the molar solubility (s) of barium chloride is  option b, which is 4s³ = Ksp.

The solubility product constant (Ksp) is the equilibrium constant for the dissolution of a sparingly soluble salt in water. In the case of barium chloride, the dissolution reaction is BaCl₂(s) ⇌ Ba₂+(aq) + 2Cl-(aq).

The molar solubility (s) is the number of moles of barium chloride that dissolves per liter of solution, and it can be calculated using the Ksp expression. For barium chloride, the Ksp expression is Ksp = [Ba₂+] [Cl-]², and assuming that x moles of barium chloride dissolve, the equilibrium concentrations are [Ba₂+] = x and [Cl-] = 2x. Substituting these values into the Ksp expression gives:

Ksp = [Ba₂+][Cl-]²

Ksp = x(2x)²

Ksp = 4x³

Rearranging this expression to solve for x gives:

x = [tex](Ksp/4)^{(1/3)}[/tex]

Therefore, the correct mathematical expression for finding the molar solubility (s) of barium chloride is 4s³ = Ksp.

Learn more about “  molar solubility (s)  “ visit here;

https://brainly.com/question/3191940

#SPJ4

The correct statement based on this cell notation is that the Pb²⁺ ions are reduced at the Pb electrode, so the Pb electrode will decrease in mass. This is because in a galvanic cell, the oxidation of the anode (Pb) leads to the reduction of the cathode (Ag) where Ag⁺ ions are reduced to form solid Ag.

The cell notation shown indicates a galvanic cell where the solid lead (Pb) electrode is connected to the silver (Ag) electrode through a salt bridge and both electrodes are in contact with their respective aqueous solutions containing their ions Pb²⁺ and Ag⁺. The double vertical lines (||) represent the salt bridge.  In the Pb electrode, Pb²⁺ ions are reduced by gaining electrons from the anode to form solid Pb. Therefore, as the Pb²⁺ ions are reduced and deposited on the electrode, the mass of the electrode decreases over time.

Conversely, the Ag electrode will increase in mass due to the deposition of solid Ag formed from the reduction of Ag⁺ ions.

Learn more about  galvanic cell here:

https://brainly.com/question/13031093

#SPJ11

The molality of the KCl solution is 0.0838 mol/kg. This means that for every kilogram of water in the solution, there are 0.0838 moles of KCl dissolved in it.

Molality is a measure of the concentration of a solution, defined as the number of moles of solute per kilogram of solvent. It is expressed in units of mol/kg.

In this case, we are given that we have 1.80 grams of KCl dissolved in 16.0 mol of H2O. We need to convert the mass of KCl to moles by dividing it by its molar mass.

The molar mass of KCl is the sum of the atomic masses of potassium (39.10 g/mol) and chlorine (35.45 g/mol), which gives a value of 74.55 g/mol.

moles of KCl = mass of KCl / molar mass of KCl = 1.80 g / 74.55 g/mol = 0.02418 mol

Next, we need to find the mass of the solvent, which is the water in this case. The molar mass of water is 18.02 g/mol. Therefore, the mass of 16.0 moles of water is:

mass of H2O = molar mass of H2O x number of moles of H2O = 18.02 g/mol x 16.0 mol = 288.32 g

Now we can use these values to calculate the molality of the KCl solution:

molality = moles of solute / mass of solvent in kg = 0.02418 mol / 0.28832 kg = 0.0838 mol/kg

Therefore, the molality of the KCl solution is 0.0838 mol/kg. This means that for every kilogram of water in the solution, there are 0.0838 moles of KCl dissolved in it.

To know more about molality, refer here:

https://brainly.com/question/14591804#

#SPJ11

A chemical reaction accompanied by a release of energy is called an exothermic reaction.

In an exothermic reaction, the energy stored in chemical bonds is converted into other forms of energy, such as heat or light, which are released into the surroundings. An exothermic reaction is one in which the overall standard enthalpy change (H) is negative, according to thermochemistry. Exothermic processes typically produce heat. Exergonic reaction, which the IUPAC defines as "... a reaction for which the overall standard Gibbs energy change G is negative," is frequently mistaken with the phrase. Because "H" contributes significantly to "G," a strongly exothermic process is typically also exergonic. Exothermic and exergonic chemical reactions make up the majority of the impressive demonstrations in schools. An endothermic reaction, on the other hand, frequently produces heat and is fueled by a rise in system entropy.

More on exothermic reaction: https://brainly.com/question/10373907

#SPJ11

Density is the measure of how tightly packed the molecules of a substance are. In organic molecules, density refers to the mass of the molecule per unit volume.

Organic molecules are composed of carbon atoms and other elements such as hydrogen, oxygen, and nitrogen. These atoms are bonded together through covalent bonds, which determine the shape and size of the molecule. The density of an organic molecule is affected by the mass and volume of its constituent atoms.

The density of an organic molecule can also be affected by the functional groups attached to the carbon backbone. For example, if a molecule has a hydroxyl group (-OH), it will be more dense than a molecule without this group because of the added mass of the oxygen atom.

In addition, the density of an organic molecule can have important implications for its behavior in different environments. For example, if a molecule is less dense than water, it will float on the surface of water, while a more dense molecule will sink.

Overall, density is an important property of organic molecules that can provide valuable insights into their physical and chemical behavior.

learn more about organic molecules

https://brainly.com/question/26556885

#SPJ11

Changing the leaving group from I to Br affects the rate of an E2 reaction. The correct answer is B, the rate decreases. This is because Iodine is a larger and less electronegative halogen than Bromine.

As a result, the C-I bond is weaker than the C-Br bond, making it easier for Iodine to leave.

Therefore, the transition state leading to the E2 reaction is more stable with Iodine as the leaving group than with Bromine. This means that a reaction with Iodine as the leaving group will occur faster than with Bromine. Thus, changing the leaving group from I to Br slows down the E2 reaction rate.

E2 reactions involve the removal of a leaving group from a molecule, and the leaving group's ability to stabilize negative charge significantly affects the reaction rate.

Iodine (I) is a better leaving group than Bromine (Br) because it is larger and can stabilize negative charge more effectively. As a result, when the leaving group changes from Iodine to Bromine, the rate of the E2 reaction decreases due to Bromine's lesser ability to stabilize the negative charge compared to Iodine.

To know more about Iodine (I) visit:

https://brainly.com/question/16867213

#SPJ11

The concentration of the H2SO4 solution is 1.00 mol/dm³ or 0.08 cm³/mol. Option D.

The balanced chemical equation for the reaction between Na2CO3 and H2SO4 is:

Na2CO3 + H2SO4 → Na2SO4 + H2O + CO2

From the equation, we can see that 1 mole of Na2CO3 reacts with 1 mole of H2SO4. Therefore, the number of moles of H2SO4 used in the reaction is:

moles of H2SO4 = 25.00/1000 × C

where C is the concentration of the H2SO4 solution in mol/dm³.

The number of moles of Na2CO3 in the solution is:

Since 20.00 cm³ of the solution contains the above amount of Na2CO3, then 100 cm³ of the solution contains:

Since the reaction between Na2CO3 and H2SO4 is a neutralization reaction, the number of moles of H2SO4 used in the reaction is equal to the number of moles of Na2CO3 in the solution. Therefore:

0.025 mol H2SO4 = 0.005 mol Na2CO3

Substituting the expression for moles of H2SO4 above, we get:

Therefore, the concentration of the H2SO4 solution is 1.00 mol/dm³ or 0.08 cm³/mol.

More on stoichiometric calculations can be found here: https://brainly.com/question/27287858

#SPJ1

A soil with pH 8.0, EC 8.0, and ESP 25% would be saline-sodic.

The soil would be classified as "sodic saline" because it has a high ESP value (25%) which indicates a high sodium content, and a high pH value (8.0) which indicates alkalinity. The EC value (8.0) indicates high salinity, but this alone does not necessarily make the soil saline-sodic.

A soil is considered sodic if its ESP (Exchangeable Sodium Percentage) is greater than or equal to 15%. Since the given ESP is 25%, the soil is sodic. Additionally, a soil is considered saline if its EC (Electrical Conductivity) is greater than or equal to 4 dS/m. In this case, the EC is 8.0, making the soil saline.

To know more about pH,

https://brainly.com/question/15289741#

#SPJ11

19.61 ml of water should be added to the initial solution to make it 51% salt.

Let's start by calculating the amount of salt present in the initial solution.

52% of 1000 ml = (52/100) x 1000 ml = 520 g of salt

Let's assume that x ml of water needs to be added to the initial solution to make it 51% salt.

The total volume of the final solution will be 1000 ml + x ml.

Since the final solution is 51% salt, we can write:

520 g / (1000 ml + x ml) = 51/100

Simplifying this equation, we get:

52000 = (1000 + x) x 51

52000 = 51000 + 51x

51x = 1000

x = 1000/51 ≈ 19.61 ml

Therefore, 19.61 ml of water should be added to the initial solution to make it 51% salt.

Learn more about concentration and dilution

brainly.com/question/15467084

#SPJ11

In salt solutions, anions can act as proton receptors, which means they can accept a hydrogen ion (proton) from water molecules, leading to the formation of hydroponic ions (H3O+). This results in an increase in the concentration of hydroponic ions, making the solution acidic.

The answer is (b) acidic, receptors.

In salt solutions, anions can act as proton receptors, which makes the solution basic. When an anion accepts a proton (H+), it increases the concentration of hydroxide ions (OH-) in the solution, leading to a higher pH and a basic nature.

The correct answer is: e) basic, receptors.

To know more about proton receptors visit:

https://brainly.com/question/28198559

#SPJ11

Spreading of positive or negative charge over two or more atoms in a compound is called resonance. Resonance is a concept used to describe the delocalization of electrons within a molecule or ion.

Resonance occurs when a molecule can be represented by more than one Lewis structure, and the actual electronic structure of the molecule is a combination, or hybrid, of these different structures.

In resonance, the electrons in a molecule are not localized on a single atom, but instead are delocalized over several atoms, resulting in a more stable overall structure. This is because the delocalization of electrons allows for the formation of multiple covalent bonds, which are stronger than a single covalent bond.

Resonance is commonly observed in organic molecules, such as benzene, where the electrons in the carbon-carbon double bonds are delocalized over the entire ring structure. It is also observed in other molecules, such as ozone (O3), where the electrons are delocalized over all three oxygen atoms, resulting in a more stable structure than a single Lewis structure could provide.

Overall, resonance is an important concept in chemistry as it helps explain the stability and reactivity of many molecules and ions.

For more questions like charge visit the link below:

https://brainly.com/question/14545963

#SPJ11

The [tex]H_2CO_3[/tex] is a weak acid that dissociates to a small extent, then the pH = 2.48

The pH scale determines how acidic or basic water is. The range is 0 to 14, with 7 representing neutrality. Acidity is indicated by pH values below 7, whereas baseness is shown by pH values above 7. In reality, pH is a measurement of the proportion of free hydrogen and hydroxyl ions in water.

The [tex]H_2CO_3[/tex] is a weak acid that dissociates to a small extent:

[tex]H_2CO_3== H+ + HCO_3-[/tex]

Use the Ka equation to determine the [H+] in solution

Ka = [H+][tex][HCO_3-] / [H_2CO_3][/tex]

Because [H+] = [HCO3-] ,and dissociation is small [H2CO3] = 0.05M

(7 x [tex]10^{-5[/tex])  = [H+]² / 0.05

[H+]² =  (7 x [tex]10^{-5[/tex])  x 0.05

[H+]² = 3.5 * [tex]10^{-6[/tex]

[H+] = 1.87 * [tex]10^{-3[/tex] M

pH = -log 1.87*[tex]10^{-3[/tex]

pH = 2.48

Learn more about pH Visit: brainly.com/question/172153

#SPJ4

If hydrochloric acid is added to a solution of HF, it will react with the HF to form H3O+ and F- ions. This reaction is a type of acid-base reaction, where the hydrochloric acid acts as the stronger acid and donates a proton to the HF, which acts as the weaker base.

The addition of hydrochloric acid will increase the concentration of H3O+ ions in the solution. This increase in the concentration of H3O+ ions will shift the equilibrium of the HF ionization reaction to the left, leading to a decrease in the percent ionization of HF. This is because the increased concentration of H3O+ ions will make it more difficult for the HF molecules to ionize and release H+ ions into the solution.

Therefore, the correct answer is that the percent ionization of HF will decrease. The Ka for HF will not change, as it is a constant value for a given temperature and is independent of the concentration of H3O+ ions in the solution.

Learn more about ionization here:

brainly.com/question/1602374

#SPJ11

The  final amount added to the reaction vial would be 5.647 mL of liquid, which is the sum of the volumes of acetone and benzaldehyde measured out.

One way a student could measure out the reactants without access to a weighing balance is by using a graduated cylinder or volumetric flask to measure out the required volumes of each liquid. The densities of acetone and benzaldehyde are 0.789 g/mL and 1.05 g/mL, respectively. Using these densities, the student could measure out 2.024 mL of acetone and 3.048 mL of benzaldehyde using a graduated cylinder or volumetric flask.

It is important to note that this method assumes that  the volumes of the liquids are measured accurately and that the densities of the liquids are known with reasonable precision. Additionally, the final amount added to the reaction vial would be 5.647 mL of liquid, which is the sum of the volumes of acetone and benzaldehyde measured out.

Visit to know more about Reaction :-

brainly.com/question/11231920

#SPJ11

When 1 gram of each of the following is metabolized, fat yields the greatest amount of energy.

To identify when 1 gram of each of the following is metabolized, the substance that yields the greatest amount of energy, we have to first check the

1. Energy content per gram for each substance:
  A) Sucrose: ~4 kcal/g
  B) Glucose: ~4 kcal/g
  C) Glycerol: ~4 kcal/g
  D) Polypeptide: ~4 kcal/g (proteins)
  E) Fat: ~9 kcal/g

Thus, fats contains ~9 kcal/g, which is more than double the energy content of the other substances listed. Therefore, when 1 gram of each substance is metabolized, fat yields the greatest amount of energy.

Fat contains more carbon-hydrogen bonds than the other molecules listed, and therefore has more potential energy stored in its chemical bonds.

To know more about Fats:

https://brainly.com/question/9416413

#SPJ11