The free energy obtained from the oxidation (reaction with oxygen) of glucose (C6H12O6) to form carbon dioxide and water can be used to re-form ATP by driving the above reaction in reverse. Calculate the standard free energy change for the oxidation of glucose.

Answer:

k= 1.925×10^-4 s^-1

1.2 ×10^20 atoms/s

Explanation:

From the information provided;

t1/2=Half life= 1.00 hour or 3600 seconds

Then;

t1/2= 0.693/k

Where k= rate constant

k= 0.693/t1/2 = 0.693/3600

k= 1.925×10^-4 s^-1

Since 1 mole of the nuclide contains 6.02×10^23 atoms

Rate of decay= rate constant × number of atoms

Rate of decay = 1.925×10^-4 s^-1 ×6.02×10^23 atoms

Rate of decay= 1.2 ×10^20 atoms/s

Answer:

256 milimoles of Sodium Carbonate are in the flask

Explanation:

The chemist adds 180mL of a 1.42M sodium carbonate solution.

Molarity is an unit of concentration in chemistry defined as the ratio between moles of solute (Sodium Carbonate, in this case) per liter of solution.

A 1.42M solution contains 1.42 moles of Sodium carbonate in 1L of the solution.

As you have 180mL = 0.180L, moles of sodium carbonate you have are:

0.180L × (1.42 moles Sodium Carbonate / 1L) = 0.2556 moles of sodium carbonate

1000milimoles are equal to 1mole. 0.2556 moles are:

0.2556 moles × (1000 milimoles / 1 mole) =

Answer:

D. [NO₂]²/[N₂O₄]

Explanation:

The equilibrium constant expression for a reaction is products over reactants. Since NO₂ has a coefficient of 2, it will become an exponent.

So, it would be:

[NO₂]²/[N₂O₄]

Hope that helps.

The correct equilibrium-constant expression for the equilibrium between dinitrogen tetroxide (N₂O₄) and nitrogen dioxide (NO₂) is option d. [NO₂]²/[N₂O₄].

In the balanced equation N₂O₄(g) ⇌ 2NO₂(g), the stoichiometric coefficients indicate that two moles of NO₂ are produced for every one mole of N₂O₄ consumed.

The equilibrium constant expression is derived from the molar concentrations of the species involved in the equilibrium. In this case, the expression is written as [NO₂]²/[N₂O₄], where [NO₂] represents the molar concentration of NO₂ and [N₂O₄] represents the molar concentration of N₂O₄.

By squaring the concentration of NO₂ and dividing it by the concentration of N₂O₄, the equilibrium-constant expression correctly accounts for the stoichiometry of the reaction and the relative concentrations of the species involved.

Hence, the correct option is option d.

Learn more about equilibrium here:

https://brainly.com/question/30694482

#SPJ 4

Answer:

Q = 246 kJ

Explanation:

It is given that,

Mass of water, m = 200 g

Let initial temperature, [tex]T_i=5^{\circ}[/tex]

Final temperature of water, [tex]T_f=300^{\circ} C[/tex]

We know that the specific heat capacity of water, [tex]c=4.18\ J/g-^{\circ} C[/tex]

So, the heat energy needed to raise the temperature is given by :

[tex]Q=mc\Delta T\\\\Q=200\times 4.18\times (300-5)\\\\Q=246620\ J[/tex]

or

Q = 246 kJ

So, the heat energy of 246 kJ is needed.

Answer:

C. Two hexagon rings with carbons at each corner have alternating double bonds and share one side. H is single bonded to all the C's except the ones on the shared side

Explanation:

The structure of aromatic hydrocarbon contain benzene (C6H6) which is a cyclic hydrocarbon.

Alternating single and double bond at each corner of two hexagon rings is an aromatic hydrocarbon as the alternating single and double bond form a benzene ring and H is single bonded to all the carbon's (C) except on the shared side.

Hence, the correct answer is "C"

Answer:

if you look up "propyne hydrocarbon" online, the model of D should pop up!

H - C = C - C - H

Middle C after "=" should have H on both sides (top and bottom)

Explanation:

Answer:

the amount of grams of dipotassium succinate trihydrate  K₂C₄H₄O₄·3H₂O = 41.798g

Explanation:

Given that:

The volume of  [tex]K_2C_4H_4O_4.3H_2O[/tex] = 660.mL

The molarity of succinic acid = 0.0577 M

The pH of the solution = 5.869

The pKa₁ = 4.207

The pKa₂ = 5.636

The pKa₂ is required to be used for the determination of given that succinic acid is dissociated twice.

Using Henderson-HasselBalch Equation,

[tex]PH =pKa + log\dfrac{[Salt]}{[Acid]}[/tex]

we know that :

The volume of  [tex]K_2C_4H_4O_4[/tex] = 660.mL

The molarity of succinic acid = 0.0577 M

number of moles = Molarity [tex]\times[/tex] Volume (liters)

number of moles =  0.0577 [tex]\times[/tex]  0.660 L

number of moles =  0.038082 mol

The balanced chemical reaction for this equation can be expressed as follows:

[tex]K_2C_4H_4O_4+C_4H_4O_4^{2-} \longleftrightarrow 2KC_4H_4O_4^-[/tex]

Here, the number of moles of [tex]K_2C_4H_4O_4= C_4H_4O_4^{2-}[/tex]

number of moles of [tex]2KC_4H_4O_4^-[/tex] = 2 × 0.038082 mol

number of moles of [tex]2KC_4H_4O_4^-[/tex] = 0.076164 mol

From the Henderson-HasselBalch Equation,

[tex]pH =pKa + log\dfrac{[Salt]}{[Acid]}[/tex]

[tex]pH =pKa_2 + log\dfrac{[K_2C_4H_4O_4]}{[KC_4H_4O_4^-]}[/tex]

[tex]pH =pKa_2 + log\dfrac{n_{K_2C_4H_4O_4}}{n_{KC_4H_4O_4^-}}[/tex]

[tex]5.869 =5.636+ log \dfrac{n_{K_2C_4H_4O_4}}{0.076164 }[/tex]

[tex]0.233= log \dfrac{n_{K_2C_4H_4O_4}}{0.076164 }[/tex]

[tex]10^{0.233}= \dfrac{n_{K_2C_4H_4O_4}}{0.076164 }[/tex]

[tex]1.710015315= \dfrac{n_{K_2C_4H_4O_4}}{0.076164 }[/tex]

[tex]1.710015315 \times 0.076164= n_{K_2C_4H_4O_4[/tex]

[tex]n_{K_2C_4H_4O_4}= 0.1302416[/tex]

SInce; the number of moles of [tex]K_2C_4H_4O_4= C_4H_4O_4^{2-}[/tex]

[tex]n_{C_4H_4O_4^{2-}} =[/tex]( 0.1302416 + 0.038082) mol

[tex]n_{C_4H_4O_4^{2-}} =[/tex] 0.1683236 mol

The grams of   dipotassium succinate trihydrate = numbers of moles of dipotassium succinate trihydrate × Molar mass

The grams of   dipotassium succinate trihydrate = 0.1683236 mol × 248.32 g/mol

The grams of   dipotassium succinate trihydrate = 41.798g

Thus , the amount of grams of dipotassium succinate trihydrate  K₂C₄H₄O₄·3H₂O = 41.798g

Explanation:

first find the the number of moles of of zinc .

as the number of moles of zinc and ZnCl2 is same we can calculate the mass of ZnCl2.

Answer:

The correct answer is - alternating and direct, in order.

Explanation:

Alternating current is is type of electric current that is characterized by the direction of the flow of electrons in continuously switches its directs in opposite manner at regular cycles. While direct current or DC is flow of the electrons that move from starting to end in one direction.

Spinning turbines always leads to the alternating electric current while only solar energy produces the direct current with the help of the solar panels.

Thus, the correct answer is -  alternating and direct, in order.

Answer:

1. alternating

2. direct

3. The sun heats up the atmosphere as Earth spins, creating areas of high and low temperature. This temperature difference causes wind to start moving through convection, which can then drive a wind turbine to produce electricity.

Explanation:

From Penn

Answer:

The side chains of the amino acids alternate above and below the sheet

Explanation:

Hydrogen bonds are formed between the amine and carbonyl groups across strands. ... Antiparallel ß sheets are slightly more stable than parallel ß sheets because the hydrogen bonding pattern is more optimal.

Answer:

The purpose of adding an aqueous solution of sodium bicarbonate is either to extract a certain compound or to remove/neutralize acidic compounds present in the reaction mixture.

Explanation:

Upon adding sodium bicarbonate, carbon dioxide is released (gaseous state at room temperature), which helps build up pressure that is able to push out the unwanted gas/liquid.

Answer:

The  wavelength is  [tex]\lambda = 91nm[/tex]  

Explanation:

From the question we are told that

    The energy required is  [tex]E = 13.6 \ eV[/tex]

This energy needed in form of a photon  can be mathematically represented as

         [tex]E = \frac{h * c }{\lambda }[/tex]

where h is the Planck constant with a value  [tex]h = 4.1357 * 10{-15} eV \cdot sec[/tex]

and  c is the speed of light which is  

 substituting values      

         [tex]13.6 eV = \frac{ 4.1357 * 10^{-15} eV * 3.0*10^8 }{\lambda }[/tex]

= >   [tex]\lambda = 9.1*10^{-8}[/tex]    

      [tex]\lambda = 91nm[/tex]  

Answer:

Oxidizing agent - CrO4^2-

Reducing agent- N2O

Explanation:

Let us look at the equation closely;

CrO4^2- (aq) + 3N2O(g) ------------> Cr^3+ (aq) + 3NO(g) [acidic]

The reduction half equation is;

CrO4^2- (aq) + 3e -------->Cr^3+ (aq)

Oxidation half equation is;

3N2O(g) ------>3 NO(g) +3 e

Note that the oxidizing agent participates in the reduction half equation while the reducing agent participates in the oxidation half equation as seen above.

Answer:the mass is 35456

Explanation:

because it works

The density has been the division of the mass to the volume of the substance. The mass of an iron cannonball of density 7.86 grams/cm³ is estimated to be 0.951 kilograms.

The mass (m) has been calculated by multiplying the density (D or ρ) and volume (V) of the iron cannonball. The measurement of the amount is called mass whereas the measurement of the space occupied by the substance volume is given as density.

The amount of the substance contained in a volume (milliliters, liters, and cubic centimeters) along with the density of the substance has been used to give mass. The mass can be estimated in kilograms, grams, milligrams, etc.

Given,

Density of iron cannonball (D) = 7.86 grams/cm³

Volume of cannonball (V) = 121 cm³

The formula to calculate mass is given as:

Density = mass ÷ volume

Mass = density × volume

Substituting values in the above formula, the mass of the iron cannonball in grams is calculated as:

mass = 7.86 grams/cm³ × 121 cm³

mass = 951.06 grams

Therefore, the iron cannonball with a density of 7.86 grams/cm³ has a mass of 0.951 kilograms.

Learn more about mass and density, here:

https://brainly.com/question/13799762

#SPJ2

Your question is incomplete, but most probably your full question was, A cannonball made of iron has a volume of 121 cm³. if the iron has a density of 7.86 g/cm³, what is the mass, in kilograms, of the cannonball?

Answer:

100.2g of CuI₂ you must add

Explanation:

Molality, m, is defined as the ratio between moles of solute and kg of solvent.

In the problem, you have a 0.694m of copper (II) iodide -CuI₂, molar mass: ‎317.35 g/mol-. That means there are 0.694 moles of CuI₂ per kg of water.

As you have 455g = 0.455kg of water -solvent-, moles of CuI₂ are:

0.455kg ₓ (0.694 moles CuI₂ / kg) = 0.316 moles of CuI₂

Using molar mass, grams of CuI₂ in the solution are:

0.316moles CuI₂ ₓ (317.35g / mol) =

Answer:

[tex]P_{gas}=131.96torr[/tex]

Explanation:

Helo,

In this case, the pressure must be computed as follows:

[tex]P_{gas}=gh\rho _{Hg}[/tex]

Which is using the density of mercury (13.6 g/mL) and its height, thus, we obtain (using the proper units):

[tex]P_{gas}=9.8\frac{m}{s^2}*(13.2cm *\frac{1m}{100cm} )*(13.6\frac{g}{cm^3}*\frac{1kg}{1000g}*\frac{1x10^6cm^3}{1m^3} )\\\\P_{gas}=17592.96Pa*\frac{760torr}{101325Pa} \\\\P_{gas}=131.96torr[/tex]

Best regards.

Answer:

pH = 10.87

Explanation:

You can find pH of a buffer (Mixture of a weak base, X, and its conjugate acid, HX) by using H-H equation:

pH = pKa + log [X] / [HX]

pKb is -log Kb = 3.13

Using Hint pKw = pKa + pKb (pKw = 14)

pKw = pKa + pKb

14 - 3.13 = pKa

10.87 = pKa

Replacing in H-H equation:

pH = 10.87 + log [0.42M] / [0.42]

pH = 10.87 + log 1

Answer:

Ksp = 2.06x10⁻¹⁰

Explanation:

For AB₂. solubility product constant, Ksp, is written as follows:

AB₂(s) ⇄ A²⁺ + 2Br⁻

Ksp = [A²⁺] [Br⁻]²

Molar solubility represents how many moles of AB₂ are soluble per liter of solution. and is obtained from Ksp:

AB₂(s) ⇄ A²⁺ + 2Br⁻

AB₂(s) ⇄ X + 2X

where X are moles that are soluble (Molar solubility)

Ksp = [X] [2X]²

As molar solubility of the salt is 3.72x10⁻⁴M:

Ksp = 4X³

Ksp = 4(3.72x10⁻⁴)³

Explanation:

Combustion of butane gives following reaction

C4H10 + 13/2 O2 → 5H20 + 4CO2

Therefore, One Kg of Butane consists of 1000/58 moles . That is 17.24 moles.

17.24 moles of butane reacts with (6.5×17.24) moles of O2 = 112.06 moles = 3.586 Kg O2.

Weight % of O2 in Air = 20 %

Mass of theoretical air used is 3.586×5 = 17.93 Kg = 71.72 %

The dew point temperature of H2O is :

D = (237.3×B)/(1-B)

B = ln(E/6.108)/17.27

E is vapor pressure at given temp.

At T = 30° C , E = 31.8 mm of Hg = 41.84 Milli Bars

B = 0.1114

D = 29.74°C

Answer:

1447584654 years or 1.44 billion years

Explanation:

From the formula;

0.693/t1/2=2.303/t log No/N

Where;

t1/2 = half life of the U-235 nuclides

No= amount of U-235 initially present

N= amount of U-235 present after a time t

t= time taken for N amount of U-235 to remain

Since N= 0.24No

Substituting values

0.693/703×10^6 = 2.303/t log No/0.24No

9.8578×10^-10 = 2.303/t log 1/0.24

9.8578×10^-10 = 1.427/t

t= 1.427/9.8578×10^-10

t= 1447584654 years

Answer:

1. False

2. True

3. True

4. True

5. True

6. True

7. True

8. False

9. True

Explanation:

Density is a physical property since its measurement does not involve any chemical process.

Since transition elements exhibit variable oxidation states, the actual oxidation state of the transition element must be specified in the compound.

Due to the fact that neutron has no charge, it was discovered by Chadwick long after the electron and proton were discovered.

The balancing of chemical reaction equations is a demonstration that atoms are neither created no destroyed. It also shows that mass is neither created nor destroyed in chemical reactions.

When a gas is heated, it expands. Its volume and its kinetic energy increases. Since volume and pressure are inversely proportional (Boyle's law) the pressure decreases.

Enthalpy is said to be an extensive property. This implies that the magnitude of change in enthalpy is known to depend on the amount of reactants that is actually reacted.

The combined gas law is applicable to all ideal gas systems irrespective of their individual chemical formulas.

10g of CO2 contains 0.227 moles of CO2 while 10g of NO contains 0.33 moles of NO hence 10.0 g of NO will contain more molecules than 10.0g of CO2.

If a sample is not at absolute zero, the particles are known to possess kinetic energy which decreases continuously until absolute zero is attained.

The correct answer is C. There is no oxygen in space, so there can be no combustion.

Explanation:

Fire and flames are the result of a chemical process known as combustion. Moreover, for combustion to occur there are two essential elements. The first one is a fuel or a substance that releases energy and ignites, and the second one is an oxidant, which accepts electrons. This mix and reaction causes high temperatures and release of heat in the form of fire and flames.

This implies, that for fireballs or any other form of fire to exist there must be oxygen or any substance that replaces it. This does not occur in space because the levels of oxygen are extremely low, this means, at least oxygen is added fireballs are not possible in this context as there is no oxygen, and therefore no combustion (Option C).

Answer:

C.) There is no oxygen in space, so there can be no combustion.

Explanation:

I got it correct on founders edtell

Answer:

Ph3OH

Explanation:

The reaction is between ethyl benzoate (PhCOOC2H5) and a Grignard reagent PhMgBr(C6H5MgBr).

The first step in the reaction mechanism is that the ethyl benzoate is converted to PhCOPh by the first molecule of Grignard reagent.

The second molecule of Grignard reagent now converts PhCOPh to Ph3O^-. In the presence of acid, Ph3O^- is now protonated to yield Ph3OH which is the major organic product of the reaction.

See image attached for more details.

Answer:

2NaOH(s) → Na₂O(s) + H₂O(g)

Hope that helps.

Answer:

The correct answer is d. Sn(s) | Sn²⁺(aq) ∥ H⁺(aq) | H₂(g) | Pt

Explanation:

The half reactions are:

2H⁺(aq) + 2 e- ⟶ H₂(g) (reduction)

Sn(s) ⟶ Sn²⁺(aq) + 2 e-  (oxidation)

In the cell notation, there are two electrodes in which are separated the reduction reaction from the oxidation reaction. In the left electrode occurs the oxidation reaction (anode) while in the right electrode occurs the reduction reaction (cathode). The general form of the cell notation is the following:

anode reaction∥ cathode reaction

where the two bars ( ∥ ) represent the physical barrier between the electrodes. A single bar ( | ) is used to represent a phase separation.  

In this redox reaction, the half reaction of the anode is Sn(s) ⟶ Sn²⁺(aq) + 2 e-; whereas the half reaction of the cathode is 2H⁺(aq) + 2 e- ⟶ H₂(g).

The componens are written in order according to the half reaction. Since Sn²⁺ and H⁺ ions are in solution, a platinum electrode is used and represented as Pt. Thus, the cell notation is:

Sn(s) | Sn²⁺(aq) ∥ H⁺(aq) | H₂(g) | Pt

Answer:

Polar molecules are not symmetrical

Explanation:

Even though the structures of the molecules involved were not shown in the question, but I will proceed to give a general explanation of the conditions that describe a polar molecule.

First of all, symmetrical molecules are non-polar and asymmetrical molecules are polar. This is the reason why CF4 will be a nonpolar molecule but H2O will be a polar molecule. Some symmetrical molecules may may posses polar bonds or dipoles but these dipoles eventually cancel out since the molecule is symmetrical in nature.

Summarily, if a molecule possess the same type of atoms attached to the central atom with some symmetry axes, like C3, C4 etc., we will end up with a non polar molecule but if we have a nonplanar molecule, then we will end up finding it to be polar.

Answer:

The change in internal energy of a system can be found by combining the heat energy added to a system minus the work done by the system is not a direct application of second law of thermodynamics.

Explanation:

Second law of thermodynamics states that heat can be transfer spontaneously from high temperature to low temperature only.

The change in internal energy of a system can be found by combining the heat energy added to a system minus the work done by the system is not a direct application of second law of thermodynamics because according to the second law of thermodynamics it is impossible in any system for heat transfer from a source to completely convert to work done in a cyclical process( bring the system to its original stage after each cycle) in which the system then return to it's original stage.

Answer:

Cr(OH)2(s), Na+(aq), and NO3−(aq)

Explanation:

Let is consider the molecular equation;

2NaOH(aq) + Cr(NO3)2(aq) -----> 2NaNO3(aq) + Cr(OH)2(s)

This is a double displacement or double replacement reaction. The reacting species exchange their partners. We can see here that both the sodium ion and chromium II ion both exchanged partners and picked up each others partners in the product.

Sodium ions and nitrate ions now remain in the solution while chromium II hydroxide which is insoluble is precipitated out of the solution as a solid hence the answer.

Answer:

Based on the Modern Periodic table, there is an increase in the electropositivity of the atom down the group as well as increases across a period. On comparing the electropositivities of the mentioned oxides central atom, it is seen that Ca is most electropositive followed by Al, Si, C, P, and S is the least electropositive.  

With the decrease in the electropositivity, there is an increase in the acidity of the oxides. Thus, the increasing order of the oxides from the least acidic to the most acidic is:  

CaO > Al2O3 > SiO2 > CO2 > P2O5 > SO3. Hence, CaO is the least acidic and SO3 is the most acidic.  

Since acidity increases across a period from left to right, and decreases down a group, the oxides can be ranked from the least acidic to the most acidic as follows:

[tex]\mathbf{CaO < Al_2O_3 < SiO_2 < CO_2 < P_2O_5 <SO_3}[/tex]

Note the following:

Using the periodic table diagram given in the attachment below, we can rank the given oxides according to their increasing acidity.

Therefore, since acidity increases across a period from left to right, and decreases down a group, the oxides can be ranked from the least acidic to the most acidic as follows:

[tex]\mathbf{CaO < Al_2O_3 < SiO_2 < CO_2 < P_2O_5 <SO_3}[/tex]

Learn more here:

https://brainly.com/question/12200588