The force of gravity is dependent on certain factors. According to the illustration, what factor(s) influence the gravitational attraction between two objects. A) mass and distance B) distance and pull C) composition and mass D) mass and density

The two statement which are true about acid rain with chemical changes are the  bonds that form are between N and O in HNO₂ and between O and H in HNO₃.The bonds that break are between N and O in NO₂ and between H  and O in H₂O.

Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.

There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.

Learn more about chemical changes,here:

https://brainly.com/question/23693316

#SPJ1

The answers include the following:

This is referred to as any preserved remains, impression, or trace of any once-living thing from a past geological age.

They are the remains of organisms preserved in the earth that provides of life's history of earth and also provides more information about the evolutionary sequence and activities which took place on earth as a whole.

Read more about Fossil here https://brainly.com/question/11829803

#SPJ1

According to concept of Avogadro's number and mole concept, there are 13.28×10²³ molecules and 14.72 moles respectively.

Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.

It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.

Number of molecules=163.395/74.09×6.023×10²³=13.281×10²³ molecules and number of moles= 3.68×4=14.72 moles.

Learn more about moles,here:

https://brainly.com/question/26416088

#SPJ1

the amount of gas present does not change when the pressure is applied to it It gets bigger.

These are typical examples of how temperatures can alter the volume of a confined gas while keeping the pressure constant:The volume increases as the temperature rises and decreases as the temperature drops.

A gas's molecules move more swiftly when it is heated because they are given more energy.More pressure and greater collisions are the direct result for the container's walls.Yet, cooling the particles will make them move more slowly and lower pressure.Try this to play about with the relationships a little.

To know more about pressure visit:

https://brainly.com/question/29341536

#SPJ1

78.3 grams of magnesium chloride are produced when 20.0 g of magnesium reacts with excess hydrochloric acid.

The balanced chemical equation for the reaction between magnesium and hydrochloric acid is:

Mg + 2HCl → MgCl2 + H2

From the equation, we can see that one mole of magnesium reacts with two moles of hydrochloric acid to produce one mole of magnesium chloride and one mole of hydrogen gas.

To find the amount of magnesium chloride produced when 20.0 g of magnesium reacts, we first need to convert the mass of magnesium to moles. The molar mass of magnesium is 24.31 g/mol, so:

moles of Mg = 20.0 g / 24.31 g/mol = 0.823 moles of Mg

According to the stoichiometry of the balanced equation, 1 mole of magnesium produces 1 mole of magnesium chloride, so the moles of magnesium chloride produced will also be 0.823 moles.

Finally, we can convert the moles of magnesium chloride to grams using the molar mass of magnesium chloride, which is 95.21 g/mol:

mass of MgCl2 = 0.823 moles × 95.21 g/mol = 78.3 g

When 20.0 g of magnesium reacts with excess hydrochloric acid, 78.3 g of magnesium chloride is formed. The reaction's balanced chemical equation is:

Mg + 2HCl → MgCl2 + H2

So, 20.0 g of Mg reacts with 1.65 moles of HCl to produce 78.3 g of MgCl2 and H2 gas.

For more question on hydrochloric acid click on

https://brainly.com/question/31074787

#SPJ11

In cyclopentene, there are three types of C-H bonds:

Allylic C-H bond (bond adjacent to the double bond)

Bridgehead C-H bond (bond at the bridgehead carbon)

Methylenic C-H bond (bond in the ring)

The order of increasing bond strength is generally:

Allylic C-H bond

Methylenic C-H bond

Bridgehead C-H bond

Cyclopentene is a cyclic hydrocarbon with the molecular formula C5H8. It is an unsaturated compound with a double bond between two carbon atoms in the ring, making it an alkene. Cyclopentene is a clear, colorless liquid that is insoluble in water but soluble in many organic solvents. It is commonly used as a starting material in the synthesis of various organic compounds, including pharmaceuticals and agrochemicals.Cyclopentene undergoes various chemical reactions due to its unsaturated nature, such as addition reactions with electrophiles and hydrogenation reactions. It can also undergo polymerization to form poly(cyclopentene) with a high glass transition temperature and good mechanical properties.

Learn more about cyclopentene here:

https://brainly.com/question/30452567

#SPJ4

The option which is not a safety precaution for handling Radioactive material is option B. Remove all metal before entering the containment room.

Radioactive substances are those which have an unstable nucleus. They achieve stability by emitting radiations like alpha particles, beta particles and gamma rays.

Working or experimenting on such substances can pose serious health risks like cancer, cardiovascular diseases etc.

Therefore following strict safety precautions while handling radioactive material is mandatory.

Certain safety measure could include

1) Protect the skin from radiation exposure by using film bandages.

2) When the radioactive sample is not in use, store them in a shielded container right away.

3) Always use gloves, tongs or remote operated robotic arms to handle the samples.

4) Do not eat, drink, smoke, or apply cosmetics in the laboratory.

5) Wear disposable clothes to reduce the risk of contamination from the samples.

Therefore, The option which is not a safety precaution for handling Radioactive material is option B. Remove all metal before entering the containment room.

To know more on Radioactive material, click on

https://brainly.com/question/1770619

#SPJ1

An example of false solution is a natural gas.

Natural gas is primarily methane with smaller quantities of other hydrocarbons.

It was formed millions of years ago when dead marine organisms sunk to the bottom of the ocean and were buried under deposits of sedimentary rock.

False solutions are those that do not actually address the problem at hand substantially but deceive people into believing that they do, while at the same time triggering other serious problems.

Examples of false solutions include:

Therefore, an example of false solution is a natural gas.

Learn more about Natural Gas, here:

https://brainly.com/question/12200462

#SPJ9

The appearance of pink color in the phenol red test and the presence of flame and "pop" sound in the splint test indicate the production of NaOH and H2 gas, respectively, in the reaction between zinc, HCl, and NaOH.

Sodium hydroxide (NaOH) and hydrogen gas (H2) can be produced by the reaction between zinc and hydrochloric acid (HCl) in the presence of sodium hydroxide. This reaction can be tested using the phenol red test and the splint test.

In the phenol red test, phenol red indicator is added to the reaction mixture. Phenol red is a pH indicator that changes color depending on the acidity or basicity of the solution. When NaOH is added to the reaction mixture, it neutralizes the acid (HCl) and increases the pH of the solution. This causes phenol red to change from yellow (acidic) to pink (basic). The appearance of pink color indicates the presence of NaOH.

In the splint test, a lighted splint is brought near the reaction mixture. When H2 gas is produced in the reaction, it can be tested using the splint test. H2 is a highly flammable gas that reacts with oxygen (O2) to produce water (H2O) vapor. When a lighted splint is brought near the reaction mixture, it can ignite the H2 gas, producing a "pop" sound and a small flame. This appearance of flame and "pop" sound confirms the presence of H2 gas.

Learn more about phenol red:https://brainly.com/question/6820241

#SPJ1

Answer:

#1 exothermic

According to the question the pressure inside the piston chamber is 2414.29 kPa.

Pressure is a measure of the force applied to a given area. It is usually expressed in terms of force per unit area such as pascals (Pa). Pressure is an important concept in physics and is used to describe a variety of phenomena in many areas of science. Pressure is most commonly used to describe the force applied by a gas or liquid on an object. The greater the pressure, the stronger the force. It can also be used to describe forces that are applied to a surface by a solid object. Pressure can be measured with a variety of instruments such as manometers, barometers, and pressure gauges.

The equation for Boyle's Law is P1V1=P2V2, where P1 is the original pressure, V1 is the original volume, P2 is the new pressure, and V2 is the new volume. Using this equation, we can calculate the new pressure, P2, as follows:

P2 = (P1V1)/V2

P2 = (425kPa * 2.00L) / 0.35L

P2 = 2414.29kPa

Therefore, the pressure inside the piston chamber is 2414.29kPa.

To learn more about pressure

https://brainly.com/question/25736513

#SPJ1

Explanation:

Refer to pic............

Answer: I would love to help but i cant see the table

Explanation:

Jana can modify her device by increasing the amount of zinc and decreasing the amount of copper sulfate to generate more heat, which will increase the water temperature within the desired range of 70°C to 100°C.

How could Jana modify her design to meet the temperature constraints?

By making these modifications, Jana can increase the water temperature to the desired range and ensure that her device is portable, safe, and effective.

To know more about water temperature follow this link:

https://brainly.com/question/27988898

#SPJ1

Global winds are produced when high pressure polar air moves to replace rising low pressure equatorial air.

What do you mean by global wind?

Large-scale atmospheric circulation patterns that cover the entire planet are referred to as global winds. The uneven heating of the Earth's surface by the sun, which results in temperature differences and pressure gradients, is what causes these winds. Ocean currents are influenced by global winds, which also move heat and moisture throughout the planet and affect weather and climate patterns.

The trade winds, the dominant westerlies, and the polar easterlies are the three main wind belts that make up the global wind system. In the tropics, the predominant westerlies move from west to east, but in the mid-latitudes, the trade winds move from east to west. Near the poles, polar easterlies wind from east to west.

The correct option is:

c) When high pressure polar air moves to replace rising low pressure equatorial air.

The uneven heating of the Earth's surface by the sun, which results in temperature disparities and pressure gradients, is what causes global winds. Low pressure occurs close to the equator and high pressure occurs close to the poles as a result of warm air rising at the equator and cold air sinking at the poles.

Global winds are caused by air flowing from high-pressure to low-pressure regions. In this instance, the global wind system is created when high pressure polar air travels towards the equator to replace rising low pressure equatorial air.

Learn more about global wind click here:

https://brainly.com/question/7922057

#SPJ1

Answer:

From the balanced chemical equation, we know that 1 mole of methane reacts with 2 moles of oxygen gas to produce 1 mole of carbon dioxide and 2 moles of water vapor. At STP (standard temperature and pressure, 0°C and 1 atm), 1 mole of gas occupies 22.4 L of volume.

First, we need to determine how many moles of methane and oxygen are involved in the reaction. Since the volumes of gases are given at STP, we can use the ideal gas law:

n = PV/RT

where n is the number of moles of gas, P is the pressure, V is the volume, R is the gas constant, and T is the temperature. At STP, the pressure is 1 atm and the temperature is 0°C or 273 K. Therefore, we have:

n(CH4) = (29.2 L)(1 atm)/(0.0821 L·atm/mol·K)(273 K) ≈ 1.15 mol

n(O2) = (63.3 L)(1 atm)/(0.0821 L·atm/mol·K)(273 K) ≈ 2.49 mol

From the balanced chemical equation, we know that 1 mole of methane produces 1 mole of carbon dioxide. Therefore, we can determine the volume of carbon dioxide produced using the ideal gas law:

V(CO2) = n(CO2)RT/P

where V is the volume, n is the number of moles, R is the gas constant, T is the temperature, and P is the pressure. At STP, the pressure is 1 atm and the temperature is 0°C or 273 K. Therefore, we have:

V(CO2) = (1.15 mol)(0.0821 L·atm/mol·K)(273 K)/(1 atm) ≈ 26.7 L

Therefore, approximately 26.7 L of carbon dioxide gas is produced in the reaction.

The correct assumption used to calculate the steady-state concentration of a pollutant in the lake, so that the concentration in the lake is equal to the one in the exit stream is that the pollutant is conservative, meaning that it does not react or transform chemically in the lake or in the exit stream. This assumption allows for the use of mass balance equations to calculate the steady-state concentration of the pollutant based on the inflow and outflow rates, assuming that there is no accumulation of the pollutant in the lake. The other assumptions listed (completely mixed lake, steady-state conditions, first-order reaction kinetics) may also be relevant in certain cases, but the conservative pollutant assumption is the most fundamental and necessary one for the calculation of steady-state pollutant concentrations.

We know a balanced equation by counting the atoms of both sides of the reaction equation.

It seems you are asking something about the balancing of chemical reaction equations and I will explain just that.

Balancing a chemical equation involves making sure that the number of atoms of each element on the reactant side of the equation is equal to the number of atoms of that element on the product side of the equation. Here are the steps to balance a chemical equation:

Write the chemical equation using the correct chemical formulas for the reactants and products.

Count the number of atoms of each element on the reactant side and the product side of the equation.

Identify the element that is not balanced.

Use coefficients (numbers in front of the chemical formulas) to balance the equation. Start with the element that appears in the fewest number of compounds and work your way up.

Double-check that the equation is balanced by counting the number of atoms of each element on both sides of the equation.

Learn more about chemical equation:https://brainly.com/question/30087623

#SPJ1

If X is an atom from the group 3 and Y is an atom from the group 6,  the most likely ionic formula is X₂Y₃.

The X is the atom from the group 3 and it will form the cation = X³⁺

The Y is the atom from the group 6 and it will form the anion = Y²⁻

To balance the charges, the 2X³⁺ cations and the 3Y²⁻ anions form the ionic formula. The ionic formula of the compound is as follows :

The ionic formula = X₂Y₃

This is called as the ionic compound, in which the compound is formed by the sharing of the electrons.

Thus, the ionic formula is X₂Y₃.

To learn more about ionic compound here

https://brainly.com/question/3222171

#SPJ4

Answer:

There are primarily two forms of bonding that an atom can participate in: Covalent and Ionic. Covalent bonding involves the sharing of electrons between two or more atoms. Ionic bonds form when two or more ions come together and are held together by charge differences.

Explanation:

Each element's mass at the start of an interaction will be the same as its mass at the conclusion of the reaction.

Individual water molecules may behave as catalysts or reactants in the process. By interactions between solute and solvent and solvent rearrangement, water can influence variations in the free activation power.

In a chemical reaction, the active sites (what you start with) are transformed into byproducts (what you end with). An arrow separates the reaction mixture, which are displayed on the left side about an equation, from the product, which are displayed on the right.

To know more about Reactant visit:

https://brainly.com/question/14225536

#SPJ1

Scientists in their order of discoveries are  Robert Boyle,Hennig Brand, Lothar Meyer,Sir William Ramsay,Marie Curie,John Newlands,Glenn Seaborg,Ernest Rutherford, Dimitri Mendeleev,J.J Thomson.

A scientist is a person who researches to advance knowledge in an area of the natural sciences.

In classical antiquity, there was no real ancient analog of a modern scientist. Instead, philosophers engaged in the philosophical study of nature called natural philosophy, a precursor of natural science.Though Thales (circa 624–545 BC) was arguably the first scientist for describing how cosmic events may be seen as natural, not necessarily caused by gods.

Learn more about scientists,here:

https://brainly.com/question/17450573

#SPJ1

Answer: 2.

Explanation: Because, if you multiply 1.22 by 0.91 or .91, you’ll get 1.1102.

*If this answer doesn’t help, let me know so I can configure this.

The list appears to be a chronological order of famous scientists and chemists. Here's the order from earliest to latest:

Generally, Robert Boyle (1627-1691): Irish chemist and physicist, known as the founder of modern chemistry.

Hennig Brand (c. 1630 – c. 1710): German alchemist and the discoverer of phosphorus.

Marie Curie (1867-1934): Polish-born physicist and chemist, famous for her pioneering research on radioactivity and the first woman to win a Nobel Prize.

John Newlands (1837-1898): English chemist who developed the concept of the periodic table of elements.

J.J Thomson (1856-1940): English physicist who discovered the electron and isotopes.

Lothar Meyer (1830-1895): German chemist who independently developed the concept of the periodic table around the same time as Dmitri Mendeleev.

Read more about scientists

https://brainly.com/question/12965344

#SPJ1

Answer:

Oil and water: mixture/heterogeneous

Explanation:

1. Oil and water: mixture/heterogeneous

Oil and water do not mix to a uniform consistency throughout

2. Copper wire: element

3. Chalk: compound

4. Sugar and water: mixture/homogeneous

Sugar and water mix perfectly and create a solution.

5. Water: compound

6. Salt and water: mixture/homogeneous

Salt and water also create a solution (saline)

7. Aluminum foil: element

8. Air in a balloon: mixture/homogeneous if random air or element if filled with specific gas like helium

9. Nitrogen: element

10. Pizza: mixture/heterogeneous

Each substance on the pizza can be readily identified and seperated

The amount of heat absorbed to raise the temperature of 435 grams of water at 1 atm from 25°C to its boiling point, 100°C, is approximately 1.4 × 10^5 joules

What is specific heat?

Specific heat is the amount of heat energy required to raise the temperature of a substance by one unit of temperature per unit of mass. It is a physical property that helps to characterize a substance and is typically measured in units of joules per gram per degree Celsius (J/g°C) or calories per gram per degree Celsius (cal/g°C).

The amount of heat absorbed to raise the temperature of a substance can be calculated using the formula:

Q = mcΔT

where Q is the amount of heat absorbed (in joules), m is the mass of the substance (in kilograms), c is the specific heat capacity of the substance (in joules per kilogram per degree Celsius), and ΔT is the change in temperature (in degrees Celsius).

Substituting the given values, we get:

m = 435 grams = 0.435 kg

ΔT = 100°C - 25°C = 75°C

The specific heat capacity of water is 4.184 J/g°C. We can convert this to joules per kilogram per degree Celsius (J/kg°C) by dividing by 1000:

c = 4.184 J/g°C ÷ 1000 = 4.184 J/kg°C

Substituting these values, we get:

Q = (0.435 kg) × (4.184 J/kg°C) × (75°C)

Q = 140,089.2 J

Therefore, the amount of heat absorbed to raise the temperature of 435 grams of water at 1 atm from 25°C to its boiling point, 100°C, is approximately 1.4 × 10^5 joules. The answer closest to this value is option (B).

To know more about Boiling point visit :-

https://brainly.com/question/40140

#SPJ9

Explanation:

Refer to picture above.........

Answer:

First, we need to find the number of moles of H2 present in 6.4 L at STP (Standard Temperature and Pressure), which is 0°C and 1 atm pressure. At STP, one mole of any gas occupies 22.4 L of volume.

So, the number of moles of H2 present in 6.4 L at STP is:

6.4 L H2 x (1 mol H2/22.4 L H2) = 0.286 mol H2

From the balanced chemical equation, we know that 2 moles of H2 produce 2 moles of H2O.

So, 0.286 mol H2 will produce (2/2) x 0.286 = 0.286 mol H2O.

Finally, we can use the molar mass of water (18.015 g/mol) to find the mass of water produced:

0.286 mol H2O x 18.015 g/mol = 5.16 g H2O

Therefore, the mass of water produced from 6.4 L H2 at STP is 5.16 g.

Answer:

The chemical equation for this reaction above would be written as: 2 H 2 ( g) + O 2 ( g ) → 2 H 2 O ( g )

Explanation:

Answer: 240 would be the correct answer (a)

Explanation: so there are 80 calories per serving and you consume 3 servings you would consume 240, so 3x80=240

To determine the density of a solid that has regular side lengths, it is first needed to calculate the volume of the solid using the equation volume = length x width x height option b)

density is the bulk of a solid component per unit volume. d = M/V, where d is density, M is mass, and V is volume, is the expression for density. Grams per cubic centimetre are a standard unit of measurement for density.

For example, the density of water is 1 gramme per cubic centimetre, and Earth's density is 5.51 grammes per cubic centimetre. Another way to state density is in kilos per cubic metre (in metre-kilogram-second or SI units).

Learn more about density

https://brainly.com/question/29775886

#SPJ1