Answer:b[tex]4.29\times 10^6\ N/C[/tex]
Explanation:
Given
The radius of the ring is [tex]a=7.55\ cm[/tex]
The charge on the ring is [tex]Q=7.06\times 10^{-6}\ C[/tex]
Electric field along the axis at a distance [tex]x[/tex] is given by
[tex]E=\dfrac{kxQ}{(x^2+a^2)^{\frac{3}{2}}}[/tex]
To get the maximum value, differentiate [tex]E[/tex] w.r.t [tex]x[/tex] we get
[tex]E_{max}=\dfrac{2kQ}{3\sqrt{3}a^2}\quad [\text{at}\ x=\dfrac{a}{\sqrt{2}}]\\\\E_{max}=\dfrac{2\times 9\times 10^9\times 7.06\times 10^{-6}}{3\sqrt{3}(7.55\times 10^{-2})^2}\\\\E_{max}=\dfrac{24.456\times 10^3}{57\times 10^{-4}}=4.29\times 10^6\ N/C[/tex]
what is Ethyl butyrate used for
Answer:
Ethyl butyrate is used as an artificial flavoring resembling orange juice or pineapple in alcoholic beverages, as an ingredient of fragrance, and as a solvent and plasticizer for cellulose. It is also used in the production of polyvinyl butyral (PVB).
Explanation:
4. How does the changing volume of the air inside the balloon affect the density
Answer:
please give me brainlist and follow
Explanation:
Since density is described as mass divided by volume, as volume decreases, density increases. With enough drop in volume, the helium balloon becomes too dense to float.
Lithium was one of the metals studied by the American physicist Robert Millikan in his research on the photoelectric effect. When illuminated with blue light of frequency 6.64 x 10" Hz, the photoelectrons ejected from a lithium surface have a maximum kinetic energy of 0.332 eV. What is the threshold frequency for lithium? For this problem, let the value of Planck's constant, h, be 6.63 x 10J's
Answer:
f = 7.9487 10¹³ Hz
Explanation:
The photoelectric effect was correctly explained by Einstein assuming that the radiation is composed of photons, which behave like particles.
hf = K + Ф
It indicates the frequency and the kinetic energy, let's look for the work function
Ф = hf - K
let's reduce the magnitudes to the SI system
K = 0.332 eV (1.6 10⁻¹⁹ J / 1 eV) = 0.5312 10⁻⁻¹⁹ J
let's calculate
Ф = 6.63 10⁻⁻³⁴ 6.64 10¹¹ - 0.5312 10⁻¹⁹
Ф = 4.40 10⁻²² - 0.5312 10⁻¹⁹
Ф = 5.27 10⁻²⁰ J
for the minimum frequency that produces photoelectrons, the kinetic energy is zero
hf = Ф
f = Ф / h
f = 5.27 10⁻²⁰ / 6.63 10⁻³⁴
f = 7.9487 10¹³ Hz
pleaseeeeeee help
What happens to light as it moves at an angle into a medium that has a higher index of refraction?
A. It slows down, and the angle decreases.
B. It speeds up, and the angle increases.
C. It slows down, and the angle increases.
D. It speeds up, and the angle decreases.
____ livestock are produce with extra copies of growth hormone genes to allow them to grow faster and produce meat that is low in fat
A) Cloned
B) Transcribed
C) Transgenic
D) Translated
As an admirer of Thomas Young, you perform a double-slit experiment in his honor. You set your slits 1.01 mm apart and position your screen 3.09 m from the slits. Although Young had to struggle to achieve a monochromatic light beam of sufficient intensity, you simply turn on a laser with a wavelength of 639 nm . How far on the screen are the first bright fringe and the second dark fringe from the central bright fringe
Answer:
[tex]0.00195\ \text{m}[/tex]
[tex]0.00293\ \text{m}[/tex]
Explanation:
m = Order = 1
D = Distance between screen and slit = 3.09 m
d = Slit distance = 1.01 mm
[tex]\lambda[/tex] = Wavelength = 639 nm
Distance from the first bright fringe from the central bright fringe is given by
[tex]y=\dfrac{m\lambda D}{d}\\\Rightarrow y=\dfrac{1\times 639\times 10^{-9}\times 3.09}{1.01\times 10^{-3}}\\\Rightarrow y=0.00195\ \text{m}[/tex]
Distance from the first bright fringe from the central bright fringe is [tex]0.00195\ \text{m}[/tex]
Distance from the second dark fringe from the central bright fringe is given by
[tex]y=(m+\dfrac{1}{2})\dfrac{\lambda D}{d}\\\Rightarrow y=(1+\dfrac{1}{2})\dfrac{639\times 10^{-9}\times 3.09}{1.01\times 10^{-3}}\\\Rightarrow y=0.00293\ \text{m}[/tex]
Distance from the second dark fringe from the central bright fringe is [tex]0.00293\ \text{m}[/tex].
The drawing shows four sheets of polarizing material, each with its transmission axis oriented differently. Light that is polarized in the vertical direction is incident from the left and has an average intensity of 20 W/m2. Determine the average intensity of the light that emerges on the right in the drawing (a) when sheet A alone is removed, (b) when sheet B alone is removed, (c) when sheet C alone is removed, and (d) when sheet D alone is removed.
Answer:
Explanation:
At the point when light is vertically polarized is incident on the polarizer whose axes are situated at angle points [tex]\theta _1 , \theta _2 , \theta _3[/tex] the intensity power in the wake of going through all the polarisers is given by the Malus law, applied threefold for every one of the three axes.
[tex]I = I_o \ cos \theta _1 \ cos \theta _2 \ cos \theta _ 3[/tex]
The heading of the direction of the polarization is equivalent to the pivoted axes of the polarizer provided that light is an electromagnetic wave, its course of polarization is therefore controlled by the electric field part.
∴
a)
When sheet A is removed, the transmitted light goes through B, at 30°.
[tex]I = I_o \ cos ^2 \theta _1 \ cos ^2 \theta _2 \ cos^2 \theta _3[/tex]
[tex]I = 20 \ cos ^2 30 \ cos ^2 60 \ cos ^2 30[/tex]
[tex]I = 2.81 \ W/m^2[/tex]
b)
When B is removed, No light passes since the axis of A and the axis of C are perpendicular to each other.
c)
When C is removed, the intensity is indeed zero since the axes are aligned and adjusted at 90° to one another.
[tex]\mathbf{d) \ I - I_o cos^2 (0) cos^2 (30) \ cos^2 (60)}[/tex]
[tex]\mathbf{d = 3.75 \ W/m^2}[/tex]
How do scientists use light years?to report report distances distances between between objects objects in in space space and and study study the the early early universeuniverseto to measure measure how how fast fast an an object object is is traveling traveling and and determine determine the the origins origins of of the the universeuniverseto to measure measure the the amount amount of of light light that that a a star star produces produces and and determine determine how how hot hot it it is is burningburningto to determine determine the the age age of of an an object object in in space space and and study study how how it it was was formedformed
Answer:to measure distances between objects and to study the early universe
Explanation:
I had this question and I got it right
Does gravity increase or decrease with greater mass???
Answer:
Increase
As the mass of either object increases, the force of gravitational attraction between them also increases.
Explanation:
The gravitational force is directly proportional to the mass of both interacting objects, more massive objects will attract each other with a greater gravitational force.
As the mass of either object increases, the force of gravitational attraction between them also increases.
Answered by none other than the ONE & ONLY #QUEEN herself aka #DRIPPQUEENMO
HOPE THIS HELPED!!!
What is the gravitational potential energy of a 4 kg bowling ball 1 m above the ground?
Answer:
40 J
Explanation:
Gpe= mgh
=4*10*1
=40
List 4 significant problems with nuclear power plants.
Answer:
1. could result in widespread contamination of air and water.
2. creation of radioactive wastes such as uranium mill tailings, spent (used) reactor fuel, and other radioactive wastes.
3. nuclear meltdowns
4. mining lung cancer risk
A piece of wood that floats on water has a mass of 0.0175 kg. A lead sinker is tied to the wood, and the apparent mass with the wood in air and the lead sinker submerged in water is 0.0765 kg. The apparent mass with both the wood and the sinker both submerged in water is 0.0452 kg. What is the SG of the wood
Answer:
The specific gravity of the wood is 1.56
Explanation:
Given;
mass of the wood in water, [tex]M_w_{H_2O}[/tex] = 0.0175 kg
apparent mass of the wood and lead sinker submerged in water, [tex]M_w_{(air)} + M_s_{H_2O}[/tex] = 0.0765 kg
apparent mass with both the wood and the sinker both submerged in water, [tex]M_w_{H_2O} + M_s_{H_2O} = 0.0452 \ kg[/tex]
Mass of the lead sinker alone submerged in water;
[tex]M_w_{H_2O} + M_s_{H_2O} = 0.0452 \ kg\\\\0.0175 \ kg + M_s_{H_2O} = 0.0452 \ kg\\\\M_s_{H_2O} = 0.0452 \ kg - 0.0175 \ kg\\\\M_s_{H_2O} = 0.0277 \ kg[/tex]
Mass of the wood in the air;
[tex]M_w_{(air)} + M_s_{H_2O} = 0.0765 \ kg\\\\M_w_{(air)} + 0.0277 \ kg = 0.0765 \ kg\\\\M_w_{(air)} = 0.0765 \ kg - 0.0277 \ kg\\\\M_w_{(air)} = 0.0488 \ kg[/tex]
Mass of water is calculated as follows;
[tex]M_w_{(air)} - M_w_{H_2O} = M_{H_2O}\\\\0.0488 \ kg - 0.0175 \ kg = M_{H_2O}\\\\0.0313 \ kg = M_{H_2O}[/tex]
The specific gravity of the wood is calculated as follows;
[tex]Specific \ gravity\ (S.G) \ of \ wood = \frac{mass \ of \ wood\ in \ air }{mass \ of \ water} \\\\Specific \ gravity\ (S.G) \ of \ wood = \frac{0.0488}{0.0313} \\\\Specific \ gravity\ (S.G) \ of \ wood = 1.559 = 1.56[/tex]
Therefore, the specific gravity of the wood is 1.56
What is the salt formed in the second sample reaction?
Answer:
This powder is sodium chloride. In the second reaction (sulfuric acid with copper(II) oxide) the resulting solution was blue in colour. When this solution was heated a small amount of white powder was noted.
Explanation:
i saw it on quizlet
According to Lenz's law, an induced current in the direction depicted in the picture would be created when: a. An external downward field is created or an external upward field is removed b. An external upward filed is created or an external upward field is removed c. An external downward field is created or an external downward field is removed d. An external upward field is created or an external downward field is removed
Answer:
C. An external downward field is created or an external downward field is removed
Explanation:
As we can see that from the attached figure that the induced current would be counter clockwise. So the field occur because of induced current i.e. out of page. This represent that the current is induced in order to rise the flux out of the direction of the page
Therefore because of the external field, the field out of page & flux would be reducing or the external upward field is eliminated
So option C is correct
Does time stop in a black hole
Answer:
In standard GR, nothing exists at the center of a black hole. The center of a black hole is a singularity, and because GR fails at that point it is simply removed from the manifold. That means that the singularity is not part of spacetime.
To answer your question more realistically, we believe that GR is an approximate theory that fails well before you reach the center. Unfortunately, we have no good alternative theory with which to answer the question in the region where GR fails. We simply don’t have any data from that regime and it is very hard to formulate a good theory without data. So there very well could be time at the center, but we simply don’t have a good way to even guess.
Answer:
Black hole is a region of space having a gravitational field so intense that no matter or radiation can escape
Actually time can't be stop.
although black hole slower a time
Explanation:
Time never cannot be stop totally.
A person is in a car crash and is not wearing their seatbelt. They hit their
head on the windshield. Explain why this is an example of Newton's First
Law
a jogger does 3.45 E 6 J of work and gives off 1.67 E 6 J of heat. what is the change in her internal energy? show your work
Answer:
well its burning its callories so thats it technically
Explanation:
What is the wavelength associated with 0.113kg ball traveling with velocity of 43 m/s?
Answer:
Wavelength = 1.36 * 10^{-34} meters
Explanation:
Given the following data;
Mass = 0.113 kg
Velocity = 43 m/s
To find the wavelength, we would use the De Broglie's wave equation.
Mathematically, it is given by the formula;
[tex] Wavelength = \frac {h}{mv} [/tex]
Where;
h represents Planck’s constant.
m represents the mass of the particle.
v represents the velocity of the particle.
We know that Planck’s constant = 6.6262 * 10^{-34} Js
Substituting into the formula, we have;
[tex] Wavelength = \frac {6.6262 * 10^{-34}}{0.113*43} [/tex]
[tex] Wavelength = \frac {6.6262 * 10^{-34}}{4.859} [/tex]
Wavelength = 1.36 * 10^{-34} meters
Two scientists are experimenting with pure samples of isotope X, a highly radioactive substance. The first scientist has a sample with a mass of 20 grams. He measures a half-life of 232 seconds. The second scientist has a sample of the same substance with a mass of 80 grams. What is the half-life that she is most likely to measure?
Answer:
Half-life does not depend on sample size, only on the constituents of the sample.
The second scientist should also observe a half-life of about 232 sec or 40 grams of X remaining after 232 sec.
Answer:
As it is the same substance, the half life will remain at 232 seconds.
Explanation:
Verified with correct test results.
Electromagnetic waves can carry more data at higher frequencies. Why would a scientist opt to transmit data at a lower frequency instead?
What are the limitations of sending information using electromagnetic waves?
What are the differences between analog and digital signals?
What are the advantages of using digital signals over analog signals?
Using reliable internet sources, identify three ways we use analog and digital signals in our everyday lives.
Describe how radio telescopes are used to explore space.
How are radio waves used on Earth?
Why do radio telescopes convert radio waves (analog signals) to electrical (digital) signals for analysis? (Hint: What did the article say about the advantages of digital signals?)
1. You are given a bottle that contains 4.59 cm of a metallic solid. The total mass of the bottle
is 35.66 g. The empty bottle weighs 14.23 g. What is the density of the solid?
A water trough is 10 m long and has a cross-section in the shape of an isosceles trapezoid that is 40 cm wide at the bottom, 100 cm wide at the top, and has height 60 cm. If the trough is being filled with water at the rate of 0.1 m3/min, how fast (in m/min) is the water level rising when the water is 10 cm deep
Answer:
0.238 m/min
Explanation:
The volume of water in the trough V =Ah' where A = area of cross-section = area of isosceles trapezoid = 1/2(a + b)h where a = length of bottom of isosceles trapezoid = 40 cm = 0.4 m, b = length of top of isosceles trapezoid = 100 cm = 1 m and h = height of isosceles trapezoid = 60 cm = 0.6 m. So,
A = 1/2(a + b)h = 1/2(0.4 m + 1 m)0.6 m = (1.4 m)0.3 m = 0.42 m² and h' = height of water level in trough = H - h" where H = length of trough = 10 m and h" = depth of water level in trough = 10 cm = 0.1 m
So, V = Ah'
V = A(H - h") = A(10 - h")
Now, the rate of change of volume of the trough with respect to time dV/dt = d[A(10 - h")]/dt
dV/dt = -Adh"/dt
dh"/dt = -dV/dt/A
Since dV/dt = 0.1 m³/min, substituting the other variables into the equation, we have
dh"/dt = -dV/dt/A
dh"/dt = -0.1 m³/min/0.42 m²
dh"/dt = -0.238 m/min
This is the rate at which the depth is decreasing
Since the height h' = 10 - h"
dh'/dt = d(10 - h")/dt
= -dh"/dt
= -(-0.238 m/min)
= 0.238 m/min
So the water level is increasing at a rate of 0.238 m/min
what is a black whole why does it exist
Answer:
A black hole is a region of spacetime where gravity is so strong that nothing—no particles or even electromagnetic radiation such as light—can escape from it. The theory of general relativity predicts that a sufficiently compact mass can deform spacetime to form a black hole.
120CD 165
उपम
DDL SL
NOH
3-33010
to
ग
tuous
car
Fusung
ता पनि
2 calcalcul e.
Power
dissipated in
heater if there
current flowing through
Ila 12v
headlamp
wh
flow the
L resistance cf ko a
Current
of 2A
प्ण्णा
5
a
through which a
is flowing
An object is placed 250 cm in front of a concave circular mirror, and the image of the object also appears at 250 cm in front of the mirror. What is the radius of curvature of the mirror?
500 cm
125 cm
25.0 cm
250 cm
Answer:
Radius of curvature of the mirror = 250 cm
Explanation:
Given:
Object distance from mirror = 250 cm (u=-250)
Object distance appears in mirror = 250 cm (v=-250)
Find:
Radius of curvature of the mirror
Computation:
Using mirror formula
1/f = 1/v + 1/u
1/f = 1/(-250) + 1/(-250)
f = (-250/2)
f = -125 cm or 125 cm
Radius of curvature of the mirror = 2(f)
Radius of curvature of the mirror = 2(125)
Radius of curvature of the mirror = 250 cm
How to write the formula for water
PLASES HELP ASAP
A baseball bat company is testing a new alloy that they claim will improve the power of its bats for very weak or low-power batters. Given the provided data of three bat compositions, swing force, and resulting ball travel distance, what conclusion can be made regarding their new alloy? A) There is no hypothesis provided. B) The hypothesis of the company is refuted. C) The hypothesis of the company is verified. D) The hypothesis was neither verified or refuted.
Answer:
B.
Explanation:
I'm not sure if it's the right answer but I think it is. I hope I helped out in some way.
An object has a mass of 50 kg on Earth. What would be the mass of that object in the Moon
It would be 50 kg.
Mass doesn't change.
Weight can.
In free fall, where does an object have the slowest speed? *
O Vi
O vf
Vtop
O more than one is correct
Answer:
vi and vtop = 0
Explanation:
Free fall is a motion of a body in which the only force acting of the body is the Gravitational Force. In this motion body moves with constant acceleration i.e acceleration due to gravity.
When an object is thrown downward from a non zero height say h the motion is referred to as free fall with initial velocity of object beign zero. Hence v=0
In free fall, an object have the slowest speed at the beginning of the motion which is at the top before the object starts to fall. [tex](V_i \ and \ V_{top})[/tex]
During a free fall, the object subjected to only acceleration due to gravity. The velocity of object increases as the object moves downwards and eventually becomes maximum before the object hits the ground.
The final velocity of the object is the greatest while the initial velocity of the object at the top before the free fall is the slowest.
[tex]V_f > V_i \ or\ V_{top}[/tex]
Thus, we can conclude that during a free fall, the velocity of the object increases downwards. The slowest speed can found at the beginning of the motion.
Learn more here:https://brainly.com/question/11698474
How efficient are the small and large scale solar-power systems used in individual homes and industrial settings? What is the environmental impact of the generation of solar power?
In detail plz
Answer:
[tex]\color{Blue}\huge\boxed{Answer} [/tex]
The potential environmental impacts associated with solar power—land use and habitat loss, water use, and the use of hazardous materials in manufacturing—can vary greatly depending on the technology, which includes two broad categories: photovoltaic (PV) solar cells or concentrating solar thermal plants (CSP).
Explanation:
I just answer the second question