The drag characteristics of a torpedo are to be studied in a water tunnel using a 1:5 scale model (length prototype/length model = 5/1). The tunnel operates with freshwater at 20°C whereas the prototype torpedo is to be used in seawater at 15.6°C. To correctly simulate the behavior of the prototype moving with a velocity of 30 m/s, what velocity is required in the water tunnel? Assume Reynolds number similarity. V = ?

Ken will owe 77,168.53 after he has made 12 repayments.

The total interest that Ken would have paid after 12 repayments is 60,400.

(i) Amount Ken will owe on his loan after he has made 12 repayments

Using the formula to find the amount owed after n years:

[tex]$$A=P(1+\frac{r}{n})^{nt}$$[/tex]

Where;A = amount owed after n years,P = Principal or initial amount borrowed,r = Interest rate,n = number of times the interest is compounded per year,t = time in years.

Here, t = 1 since we are calculating for one yearAfter 12 months, Ken would have made 12 repayments;

thus he will have paid 800 x 12 = 9600 into the loan.

Amount borrowed = 70,000,

Rate = 6.9% per annum

n = 12 (monthly compounding),

P = 70,000

r = 6.9% / 100 = 0.069 / 12 = 0.00575 (monthly rate)

A = 70000(1+0.00575)¹²

A = 70000(1.00575)¹²

A = 77168.53

(ii) Total interest that Ken will have paid after 12 repayments

Total interest that Ken will have paid after 12 repayments = Total amount repaid - Amount borrowed

Total amount repaid after 12 repayments = 12 x 800 = 9600

Amount borrowed = 70,000

Total interest paid after 12 repayments = Total amount repaid - Amount borrowed

Total interest paid after 12 repayments = 9600 - 70,000

Total interest paid after 12 repayments = -60,400

To know more about repayment  visit:

https://brainly.com/question/31483682

#SPJ11

Based on the given information, we can calculate the annual income for each profession using the formula: Annual income = Hourly wage * Number of hours worked per year.

Using this formula, we can calculate the annual income for each profession:

Hourly wage Annual income

Federal minimum wage $7.25 $7.25 * 2000 = $14,500

Oregon's minimum wage $8.95 $8.95 * 2000 = $17,900

Average for all occupations $23.87 $23.87 * 2000 = $47,740

Marketing managers $51.90 $51.90 * 2000 = $103,800

Family-practice doctors $82.70 $82.70 * 2000 = $165,400

Veterinary assistants $11.12 $11.12 * 2000 = $22,240

Police officers $26.57 $26.57 * 2000 = $53,140

Child-care workers $9.38 $9.38 * 2000 = $18,760

Restaurant cooks $10.59 $10.59 * 2000 = $21,180

Air-traffic controllers $58.91 $58.91 * 2000 = $117,820

Now, let's calculate the difference between each annual wage figure and both the federal poverty line and the median household income:

Difference between annual wage and federal poverty line:

Federal minimum wage: $14,500 - Federal poverty line = Negative difference (below poverty line)

Oregon's minimum wage: $17,900 - Federal poverty line = Negative difference (below poverty line)

Average for all occupations: $47,740 - Federal poverty line = Positive difference

Marketing managers: $103,800 - Federal poverty line = Positive difference

Family-practice doctors: $165,400 - Federal poverty line = Positive difference

Veterinary assistants: $22,240 - Federal poverty line = Positive difference

Police officers: $53,140 - Federal poverty line = Positive difference

Child-care workers: $18,760 - Federal poverty line = Positive difference

Restaurant cooks: $21,180 - Federal poverty line = Positive difference

Air-traffic controllers: $117,820 - Federal poverty line = Positive difference

Difference between annual wage and median household income:

Federal minimum wage: $14,500 - Median household income = Negative difference (below median)

Oregon's minimum wage: $17,900 - Median household income = Negative difference (below median)

Average for all occupations: $47,740 - Median household income = Negative difference (below median)

Marketing managers: $103,800 - Median household income = Positive difference

Family-practice doctors: $165,400 - Median household income = Positive difference

Veterinary assistants: $22,240 - Median household income = Negative difference (below median)

Police officers: $53,140 - Median household income = Positive difference

Child-care workers: $18,760 - Median household income = Negative difference (below median)

Restaurant cooks: $21,180 - Median household income = Negative difference (below median)

Air-traffic controllers: $117,820 - Median household income = Positive difference

Learn more about  number from

https://brainly.com/question/27894163

#SPJ11

None of the given options (A, B, C, or D) matches the calculated area of the irregular section using Simpson's One Third Rule.

To calculate the area of the irregular section using Simpson's One Third Rule, we need to first determine the y-values corresponding to the given offsets.

Let's denote the offsets as x-values and the corresponding y-values as f(x).

Given offsets: 9.6, 12.4, 5.8, 7.0, 4.2

Common interval: 10m

To calculate the y-values, we can start from a reference line and add the offsets successively.

Let's assume the reference line is at y = 0.

Then, the y-values for the given offsets can be calculated as follows:

f(0) = 0 (reference line)

f(10) = 0 + 9.6

= 9.6

f(20) = 9.6 + 12.4

= 22

f(30) = 22 - 5.8

= 16.2

f(40) = 16.2 + 7.0

= 23.2

f(50) = 23.2 - 4.2

= 19

Now we have the x-values and the corresponding y-values:

(0, 0), (10, 9.6), (20, 22), (30, 16.2), (40, 23.2), (50, 19).

We can use Simpson's One Third Rule to calculate the area of the irregular section.

The formula for Simpson's One Third Rule is:

Area = (h/3) × [f(x0) + 4 × f(x₁) + 2 × f(x₂) + 4 × f(x₃) + ... + 4 × f(xₙ₋₁) + f(xn)]

where h is the common interval (in this case, 10m) and n is the number of intervals.

In our case, the number of intervals is 5, so n = 5.

Plugging in the values, we have:

Area = (10/3) × [0 + 4 × 9.6 + 2 × 22 + 4 × 16.2 + 4 × 23.2 + 19]

Calculating the above expression, we get:

Area = (10/3) × [0 + 38.4 + 44 + 64.8 + 92.8 + 19]

= (10/3) × [258.4]

≈ 861.33 sq.m

Therefore, none of the given options (A, B, C, or D) matches the calculated area of the irregular section using Simpson's One Third Rule.

To know more about Common interval, visit

https://brainly.com/question/30458841

#SPJ11

The friction head loss for a length of 250 meters in a 2-inch-diameter hydraulic pipe circulating a rate of 3 l/s of water at 20 degrees Celsius is approximately 5746.73 meters.

To calculate the friction head loss for the given hydraulic pipe, we need to follow these steps:

Step 1: Convert the diameter of the pipe from inches to meters.
Given that the diameter is 2 inches, we can convert it to meters by multiplying it by the conversion factor of 0.0254 meters/inch. So, the diameter in meters is 2 inches * 0.0254 meters/inch = 0.0508 meters.

Step 2: Calculate the cross-sectional area of the pipe.
The formula to calculate the cross-sectional area of a pipe is A = π * r^2, where r is the radius of the pipe. Since the diameter is given, we can find the radius by dividing the diameter by 2. Thus, the radius is 0.0508 meters / 2 = 0.0254 meters.
Using the formula, the cross-sectional area is A = π * (0.0254 meters)^2 = 0.0020239 square meters.

Step 3: Calculate the velocity of water in the pipe.
The flow rate is given as 3 l/s (liters per second). Since the flow rate is equal to the cross-sectional area multiplied by the velocity, we can rearrange the formula to solve for velocity.
Velocity = Flow rate / Cross-sectional area = 3 l/s / 0.0020239 square meters = 1480.036 m/s (rounded to three decimal places).

Step 4: Calculate the friction head loss.
The Darcy-Weisbach equation is commonly used to calculate the friction head loss in pipes. The equation is:
Head loss = (f * L * V^2) / (D * 2g),
where f is the Darcy friction factor, L is the length of the pipe, V is the velocity of the water, D is the diameter of the pipe, and g is the acceleration due to gravity (approximately 9.81 m/s^2).

Given that the length of the pipe is 250 meters, and the diameter is 0.0508 meters, we can substitute these values into the equation.

The Darcy friction factor depends on the Reynolds number, which can be calculated as:
Re = (V * D) / ν,
where ν is the kinematic viscosity of water at 20 degrees Celsius. The kinematic viscosity of water at 20 degrees Celsius is approximately 1.004 x 10^-6 m^2/s.

Substituting the values into the equation, we have:
Re = (1480.036 m/s * 0.0508 meters) / (1.004 x 10^-6 m^2/s) = 7.471 x 10^7 (rounded to three significant figures).

Now, using the Reynolds number, we can find the Darcy friction factor using a Moody chart or empirical formulas. Since we don't have that information here, let's assume a reasonable value of f = 0.02 (a commonly used approximation for smooth pipes).

Finally, substituting all the values into the friction head loss equation:
Head loss = (0.02 * 250 meters * (1480.036 m/s)^2) / (0.0508 meters * 2 * 9.81 m/s^2) = 5746.73 meters.

Therefore, the friction head loss for a length of 250 meters in a 2-inch-diameter hydraulic pipe circulating a rate of 3 l/s of water at 20 degrees Celsius is approximately 5746.73 meters.

To learn  more about friction

https://brainly.com/question/866413

#SPJ11

The revenue function for Company A is R(x) = 16x, where x represents the number of gidgets sold.

The cost function for Company A is C(x) = 12x + 1,424, where x represents the number of gidgets produced.

The total profit function for Company A is P(x) = 4x - 1,424.

Company A will break even when they sell 356 gidgets.

Company A will start making a profit when they sell more than 356 gidgets.

To analyze the revenue and cost functions for Company A, let's break down the given information step by step.

The revenue function, R(x), represents the total revenue generated by selling x number of gidgets. It is given as:

R(x) = 16x

This means that for each gidget sold, the company earns $16 in revenue. The revenue function is linear, where the coefficient 16 represents the revenue generated per unit (gidget).

The cost function, C(x), represents the total cost incurred by producing x number of gidgets. It is given as:

C(x) = 12x + 1,424

This means that the cost function is also linear, with a coefficient of 12 representing the cost per unit (gidget). The constant term 1,424 represents the fixed costs or overhead expenses incurred by the company.

Now, let's analyze the functions further and answer a few questions:

What is the total profit function, P(x), for Company A?

The total profit function can be determined by subtracting the cost function (C(x)) from the revenue function (R(x)):

P(x) = R(x) - C(x)

P(x) = 16x - (12x + 1,424)

P(x) = 16x - 12x - 1,424

P(x) = 4x - 1,424

Therefore, the total profit function for Company A is P(x) = 4x - 1,424.

At what level of production will Company A break even (have zero profit)?

To find the break-even point, we set the profit function (P(x)) equal to zero and solve for x:

4x - 1,424 = 0

4x = 1,424

x = 1,424 / 4

x = 356

Therefore, Company A will break even when they sell 356 gidgets.

At what level of production will Company A start making a profit?

To determine the level of production where the company starts making a profit, we need to find the point where the profit function (P(x)) becomes positive. In this case, any value of x greater than 356 will result in a positive profit.

Hence, Company A will start making a profit when they sell more than 356 gidgets.

for such more question on revenue function

https://brainly.com/question/14723549

#SPJ8

The peak runoff for the given watershed using the rational method, we need to calculate the rainfall intensity (I) and the runoff coefficient (C) for each land use area, and then determine the total peak runoff.

Given:

Storm duration (T) = 20 minutes

Return period (RP) = 25 years

Land use areas:

Steep lawns (20 hectares)

Attached multifamily residential area (10 hectares)

Downtown business area (5 hectares)

We'll assume the minimum C value for each land use area. Let's calculate the estimated peak runoff using the rational method:

Calculate the rainfall intensity (I) for the given return period using appropriate rainfall frequency analysis for Area 1 of the United States. This data can be obtained from rainfall frequency analysis charts or rainfall intensity-duration-frequency equations specific to the region.

Determine the runoff coefficient (C) for each land use area:

Steep lawns: Use the minimum C value for lawns, typically ranging from 0.10 to 0.20.

Attached multifamily residential area: Use the minimum C value for residential areas, typically ranging from 0.45 to 0.60.

Downtown business area: Use the minimum C value for urban areas, typically ranging from 0.60 to 0.95.

Calculate the peak runoff (Q) for each land use area using the rational method equation:

Q = (C * A * I) / 360,

where Q is the peak runoff in cubic units per second, C is the runoff coefficient, A is the area in square units, and I is the rainfall intensity in inches per hour.

Sum up the peak runoff from all land use areas to obtain the total estimated peak runoff for the watershed.

The specific values for rainfall intensity, C coefficients, and units of area and rainfall intensity should be used to obtain accurate results. It is recommended to consult regional hydrological data and guidelines or work with a qualified hydrologist or engineer for precise estimations.

To know more about coefficient, visit:

https://brainly.com/question/1038771

#SPJ11

The capacity of the Apitong post, assuming a pin-pin support condition, is 141.280 KN.

Given:

Length of the post = 4.25 m

Diameter of the post = 200mm = 0.2m

Width of the post = 300mm = 0.3m

Allowable compressive strength of the old Apitong post based on NSCP 2015 = 9.56 MPa

Modulus of elasticity of the old Apitong post = 7310 MPa

Allowable compressive stress for Yakal = 15.8 MPa

Modulus of elasticity of Yakal = 9780 MPa

To find:

The capacity of Apitong post in KN, assumed a pin-pin support condition.

Formula Used:

The Euler’s formula for long columns is: [tex]P_{cr} = \frac{\pi^2 \cdot EI}{(KL)^2}[/tex]

Where:

Pcr = Critical load or buckling load, kN/m2 or N/mm2

[tex]\frac{\pi^2 \cdot EI}{L^2}[/tex]

K = Effective length factor

E = Modulus of elasticity

I = Moment of inertia

L = Length of the column

Assuming the effective length factor as 1 (As it is a pin-pin support condition), K = 1

Effective length (Le) = 2 * Length of the column = 2 * 4.25 = 8.5 m

Modulus of elasticity of Apitong post, E = 7310 MPa = 7310 N/mm2

Moment of inertia of a rectangular section,

[tex]I = \frac{{bh^3}}{{12}}[/tex]

[tex]I = \frac{{0.2 \times 0.3^3}}{{12}}[/tex]

[tex]I = 0.00135 \, \text{m}^4[/tex]

Critical load or buckling load,

[tex]P_{cr} = \frac{\pi^2 \cdot EI}{(KL)^2}[/tex]

[tex]P_{cr} = \frac{{\pi^2 \times 7310 \times 0.00135}}{{8.5^2}}[/tex]

Pcr  = 141.28 KN

As per Euler's formula, the capacity of Apitong post in KN is 141.28 KN, assumed a pin-pin support condition.

Learn more about Apitong post:

https://brainly.com/question/33108639

#SPJ11

The first expression can be simplified to 3bm-bn and the second expression can be simplified to m²-1.

The distributive property is a fundamental property of algebra that allows you to simplify expressions by distributing or multiplying a value to each term within parentheses. The property is commonly stated as:

a(b + c) = ab + ac

1. b ( 3m - n )

distribute the terms:

3bm - bn

The FOIL method is a useful technique when multiplying binomials and simplifying expressions. The property is commonly stated as:

(a + b)(c + d) = (ac) + (ad) + (bc) + (bd)

2. (m - 1)(m + 1)

FOIL the expression:

m²-1m+1m-1

combine the like terms:

m²-1

Learn about the distributive property:

The correct question is:-

Simplify the following expressions:

1) b(3m-n)

2) (m-1)(m+1)

The IUPAC name for the given compounds are as follows: A) 5-acetyl-4-nonanolB) 3-butyl-4-hydroxyheptan-2-oneC) 4-hydroxy-3-butylheptan-2-oneD) 5-acetyl-6-nonanol.

The IUPAC name for the given compound is 4-hydroxy-3-butylheptan-2-one (Option C).Option C, that is, 4-hydroxy-3-butylheptan-2-one is a carboxylic acid that is an organic compound with a 7-carbon chain.

A hydroxyl group at position 4, a methyl ketone group at position 2, and a butyl group at position 3. This is the IUPAC name for the given compound and the correct answer to the question.

To know more about compounds visit :

https://brainly.com/question/14117795

#SPJ11

Original sum of all values = Original mean * Original sample size

The new mean value of the sample after changing one value from 25 to 55 can be calculated as 31.25.

To find the new mean value of the sample, we need to consider the impact of changing one value from 25 to 55.

Original sample size: 20

Original mean value: 30

To calculate the new mean, we can use the formula for the mean:

New Mean = (Sum of all values in the new sample) / (New sample size)

Since only one value is changed, the sum of all values in the new sample remains the same as in the original sample.

Original sum of all values = Original mean * Original sample size

= 30 * 20

= 600

To find the new sum of all values in the sample, we replace the changed value (25) with the new value (55).

New sum of all values = Original sum of all values - Original value + New value

= 600 - 25 + 55

= 630

Now we can calculate the new mean:

New Mean = New sum of all values / New sample size

= 630 / 20

= 31.25

Therefore, the new mean value of the sample after changing one value from 25 to 55 is 31.25.

Learn more about dataset: brainly.com/question/29342132

#SPJ11

Original sum of all values = Original mean * Original sample size

The new mean value of the sample after changing one value from 25 to 55 can be calculated as 31.25.

To find the new mean value of the sample, we need to consider the impact of changing one value from 25 to 55.

Original sample size: 20

Original mean value: 30

To calculate the new mean, we can use the formula for the mean:

New Mean = (Sum of all values in the new sample) / (New sample size)

Since only one value is changed, the sum of all values in the new sample remains the same as in the original sample.

Original sum of all values = Original mean * Original sample size

= 30 * 20

= 600

To find the new sum of all values in the sample, we replace the changed value (25) with the new value (55).

New sum of all values = Original sum of all values - Original value + New value

= 600 - 25 + 55

= 630

Now we can calculate the new mean:

New Mean = New sum of all values / New sample size

= 630 / 20

= 31.25

Therefore, the new mean value of the sample after changing one value from 25 to 55 is 31.25.

Learn more about dataset: brainly.com/question/29342132

#SPJ11

The jar test is performed to determine the optimum alum dose for water treatment. The specific value of the optimum dose cannot be determined without the detailed results of the jar test. Analyzing the clarity and settling of particles for different doses helps identify the most effective alum dose.

To determine the optimum alum dose, multiple jar tests are conducted using varying doses of alum. The jar test that produces the best results, such as the highest clarity and settling of particles, indicates the optimum dose that should be used in the actual water treatment process.

Without the specific details of the results obtained in the jar test, it is difficult to provide a precise answer. However, the optimum alum dose is typically determined by comparing the clarity and settling of particles for different doses of alum. The dose that achieves the best clarity and settling is considered the optimum.

In the given question, the result is mentioned as "nearly," which suggests that the specific value of the optimum alum dose is not provided. It is important to note that the optimum alum dose may vary depending on the characteristics of the water being treated, such as its turbidity and the types of impurities present.

To determine the optimum alum dose, it is necessary to analyze the jar test results and compare the clarity and settling for different doses of alum. This analysis helps identify the dose that provides the best water treatment efficiency.

learn more about water treatment from given link

https://brainly.com/question/13348717

#SPJ11

Detolius Mochonism 15 is a scientific name that is not known to exist in the biological classification system. Therefore, it can be assumed that this term does not refer to any plant or animal species. Additionally, the internet search did not produce any relevant results.

Consequently, a detoilus mochonism 15 is a non-existing entity. Detolius Mochonism 15 seems to be a made-up term that does not have any meaning in the classification of living organisms. Therefore, it is not possible to propose a detoilus mochonism 15. However, if you meant to ask for an explanation of any scientific term related to biology, you can provide the correct term or a description of the concept.

Scientists use a systematic approach to name and categorize living organisms, which results in a taxonomic classification system. The system organizes the living world based on their physical and genetic characteristics. This classification system contains eight levels, from the most general to the most specific. The levels are Domain, Kingdom, Phylum, Class, Order, Family, Genus, and Species. Therefore, to propose a detoilus mochonism 15, you would need to provide more information about what the term refers to and how it relates to the existing biological classification system. Nonetheless, the term Detolius Mochonism 15 is not known to have any scientific significance, meaning it is nonexistent.

To know more about system visit:

https://brainly.com/question/19843453

#SPJ11

Increasing excess air flow leads to an increase in fuel consumption, as more fuel is needed to compensate for the additional air being heated and pumped into the system.

Given

mixture of ethane and hydrogen = 100 moles

Total moles = 100

Total moles of air used = 20% excess air

= 20% of (2.8x + 9.52y)

= 0.56x + 1.904y

Moles of C₂H₆ used = 80 moles

Moles of H2 used = 20 moles

Fractional conversion of C₂H₆ = 95%

Fractional conversion of H₂ = 90%

From the given data, the moles of CO₂ produced by the reaction of C₂H₆ with air is:

0.95*0.92*80 moles of C₂H₆= 69.44 moles

The moles of H₂O produced are:

0.90*20 moles of H₂ = 18 moles

The moles of CO produced by the reaction of H₂ with air is:

0.90*10 moles of H₂ = 9 moles

The moles of air used are:

0.56x + 1.904y moles

The balance equation of the combustion of C₂H₆ is:

C₂H₆ + 3.5O₂ + 13.77N₂ → 2CO₂ + 3H₂O + 13.77N₂

Since 80 moles of C₂H₆ is used, 69.44 moles of CO₂ will be produced and this CO₂ will contain

69.44*0.92 = 63.8528 moles of O₂.

CO₂ → CO + 0.5O₂

As 63.8528 moles of O₂ are used, only 0.5*63.8528 = 31.9264 moles of CO₂ will be converted into CO.

The total moles of CO in the effluent gases will be:

CO produced by C₂H₆ + CO produced by H₂ + CO produced from CO₂= 0 + 0.1*9 moles of CO + 31.9264 moles of CO = 35.8264 moles

The balance equation for the combustion of H2 is:

2H₂ + O₂ → 2H₂O

As 20 moles of H₂ is used, 18 moles of H₂O will be produced.

Two costs associated with increasing the percent excess air fed to the furnace are as follows:

Increase in fuel consumption: Increasing excess air flow leads to an increase in fuel consumption, as more fuel is needed to compensate for the additional air being heated and pumped into the system.

Increase in equipment costs: The equipment required to maintain a higher percentage of excess air flow is more expensive than the equipment needed to maintain a lower percentage of excess air flow.

To know more about equation visit:

brainly.com/question/29657983

#SPJ11

If an error is introduced in the 6th cycle of PCR with Taq DNA polymerase, the ratio of correct to incorrect products will be 100:1.

To calculate the percentage of incorrect or erroneous products in the PCR amplification with a high-fidelity DNA polymerase, we need to consider the error rate of the polymerase and the number of cycles.

High-fidelity DNA polymerases typically have an error rate ranging from 10⁻⁵ to 10⁻⁶ errors per base pair per cycle.

Let's assume the error rate is 10⁻⁶ errors per base pair per cycle for our calculation.

In PCR, the number of copies of the target sequence doubles with each cycle.

So, after 30 cycles, the target sequence will be amplified 2³⁰(approximately 1.07 x 10⁹) times.

Now, let's calculate the percentage of incorrect products if an error is introduced in the 20th cycle:

The number of copies after the 20th cycle will be 2²⁰ (approximately 1.05 x 10⁶).

If an error is introduced in the 20th cycle, it will be propagated in subsequent cycles.

The total number of erroneous products will be 1.05 x 10⁶ multiplied by the error rate (10⁻⁶), which equals 1.

The percentage of incorrect products can be calculated by dividing the number of erroneous products by the total number of products and multiplying by 100: (1 / 1.07 x 10⁹) x 100 = 9.35 x 10⁻⁸ %.

Therefore, if an error is introduced in the 20th cycle of PCR with a high-fidelity DNA polymerase, the percentage of incorrect or erroneous products will be approximately 9.35 x 10⁻⁸ %.

Now, let's consider the scenario where Taq DNA polymerase (which has a higher error rate) is used instead. The error rate of Taq DNA polymerase is typically around 10^-4 to 10^-5 errors per base pair per cycle.

If an error is introduced in the 6th cycle:

The number of copies after the 6th cycle will be 2⁶ (64).

If an error is introduced in the 6th cycle, it will be propagated in subsequent cycles.

The total number of incorrect products will be 64 multiplied by the error rate (let's assume 10⁵), which equals 0.64.

The ratio of correct to incorrect products can be calculated by dividing the number of correct products (64) by the number of incorrect products (0.64): 64 / 0.64 = 100.

Therefore, if an error is introduced in the 6th cycle of PCR with Taq DNA polymerase, the ratio of correct to incorrect products will be 100:1.

Learn more about DNA polymerase click;

https://brainly.com/question/33312359

#SPJ4

Molecules from a parallel universe may have different masses than those in our universe, but they follow the same 3-D quantum mechanical behavior. The energy eigenvalue of the 3-D rigid rotor molecule with atoms of 1.165 amu and 18.642 amu and bond length of 1.28 Å was determined to be 0.234 eV using the formula I(I + 1)ħ2/2I.

The 3D quantum mechanical behavior is obeyed by the molecules from a parallel universe which might have different masses than the ones present in our universe. As a 3-D rigid rotor, the molecule with atoms of 1.165 amu and 18.642 amu and bond length of 1.28 Å will have energy eigenvalues of I(I + 1)ħ2/2I,

where ħ = h/2π, and I = moment of inertia. The moment of inertia is (2.6727 × 10-46 kg m2). Hence, by using the formula, I(I + 1)ħ2/2I, the energy eigenvalue will be calculated. Therefore, the energy eigenvalue is

(5(5 + 1)ħ2)/2I

= (15 × (6.626 × 10-34 J s)2)/(2(2.6727 × 10-46 kg m2))

= 0.234 eV.

:Molecules from a parallel universe may have different masses than those in our universe, but they follow the same 3-D quantum mechanical behavior. The energy eigenvalue of the 3-D rigid rotor molecule with atoms of 1.165 amu and 18.642 amu and bond length of 1.28 Å was determined to be 0.234 eV using the formula I(I + 1)ħ2/2I.

To know more about eigenvalue visit:

brainly.com/question/31650198

#SPJ11

In feet 10 meters is 32.8ft. The correct answer is option a) 32.8ft.

To convert 10 meters to feet, we need to use the conversion factor that 1 foot is equal to 0.3048 meters.

Multiplying 10 meters by the conversion factor, we have:

10 meters * (1 foot / 0.3048 meters) = 32.80839895 feet

Rounding to the nearest decimal place, 10 meters is approximately equal to 32.8 feet.

Therefore, the correct answer is option a) 32.8ft. Options b) 15.5ft, c) 10ft, and d) 25.2ft are incorrect as they do not correspond to the accurate conversion of 10 meters to feet.

To know more about feet:

https://brainly.com/question/12446886

#SPJ11

Lantus is a modified form of insulin that has been optimized for stability, solubility, and prolonged action in the body. These modifications make Lantus a more effective and reliable option for managing diabetes.

Lantus differs from "normal" insulin in several ways:

1. The usual insulin molecule has been combined with zinc isophane. This combination helps to prolong the duration of action of Lantus compared to regular insulin. The addition of zinc isophane allows for a slower and more consistent release of insulin into the bloodstream.

2. Glycine has been substituted in at A21, and two new arginines have been added as B31 and B32. These modifications in the structure of Lantus improve its stability and solubility, which are important factors for its effectiveness as an insulin medication.

3. An aspartic acid has been substituted for proline at B28. This modification also contributes to the stability and solubility of Lantus. It helps to prevent the formation of insoluble clumps or aggregates of insulin molecules, ensuring a consistent and reliable supply of insulin.

In summary, Lantus is a modified form of insulin that has been optimized for stability, solubility, and prolonged action in the body. These modifications make Lantus a more effective and reliable option for managing diabetes.

Please let me know if there's anything else I can help you with.

learn more about Lantus on :

https://brainly.com/question/29223371

#SPJ11

Lantus differs from "normal" insulin such as proline at B28 and the lysine at B29 have been reversed. The correct option is e. The proline at B28 and the lysine at B29 have been reversed.

Lantus is a modified form of insulin that has been optimized for stability, solubility, and prolonged action in the body. These modifications make Lantus a more effective and reliable option for managing diabetes.

Lantus differs from "normal" insulin in several ways:

1. The usual insulin molecule has been combined with zinc isophane. This combination helps to prolong the duration of action of Lantus compared to regular insulin. The addition of zinc isophane allows for a slower and more consistent release of insulin into the bloodstream.

2. Glycine has been substituted in at A21, and two new arginines have been added as B31 and B32. These modifications in the structure of Lantus improve its stability and solubility, which are important factors for its effectiveness as an insulin medication.

3. An aspartic acid has been substituted for proline at B28. This modification also contributes to the stability and solubility of Lantus. It helps to prevent the formation of insoluble clumps or aggregates of insulin molecules, ensuring a consistent and reliable supply of insulin.

In summary, Lantus is a modified form of insulin that has been optimized for stability, solubility, and prolonged action in the body. These modifications make Lantus a more effective and reliable option for managing diabetes.

learn more about Lantus on :

brainly.com/question/29223371

#SPJ11

The probability of a random point on AK being on DF is 0.2, meaning there is a 20% chance that a randomly selected point on AK will fall within the segment DF.

To determine the probability that a random point on AK will be on DF, we need to consider the length of segment DF relative to the length of segment AK.

Let's analyze the given scale:

A = -10, B = -8, C = -6, D = -4, E = -2, F = 0, G = 2, H = 4, I = 6, J = 8, and K = 10.

We can observe that segment AK spans from -10 to 10, covering a total length of 20 units. Similarly, segment DF spans from -4 to 0, covering a length of 4 units.

To find the probability, we need to calculate the ratio of the length of segment DF to the length of segment AK:

Probability = Length of segment DF / Length of segment AK

Probability = 4 units / 20 units

Probability = 1/5

In simpler terms, out of all the points on the segment AK, 20% of them will fall within the segment DF.

For more such information on: probability

https://brainly.com/question/13604758

#SPJ8

The tension in cable AB is 3200 lb, while the tension in cables AC and AD is 1600 lb each.

The tension in cable AB is the force pulling the crate upward. Since the crate is not accelerating vertically, the upward force must balance the downward force due to the crate's weight.

The weight of the crate is given as 3200 lb. In terms of forces, weight is equal to mass multiplied by acceleration due to gravity. We can convert the weight from pounds to mass using the conversion factor of 32.2 lb/ft² ≈ 32.2 lb/slug.

Weight of the crate (W) = mass (m) * acceleration due to gravity (g)

W = m * g

3200 lb = m * 32.2 lb/slug * ft/s²

Now, let's apply Newton's second law in the vertical direction, which states that the sum of all forces in the y-direction is equal to zero since the crate is not accelerating vertically.

Sum of forces in the y-direction = 0

TAB - W = 0

Substituting the weight of the crate, we have:

TAB - 3200 lb = 0

Therefore, the tension in cable AB is 3200 lb.

The tension in cable AC is the force pulling the crate to the right. Again, since the crate is not accelerating horizontally, the force pulling it to the right must balance the force pulling it to the left.

Considering the forces in the x-direction, we have:

Sum of forces in the x-direction = 0

TAC - TAD = 0

This equation tells us that the tension in cable AC is equal to the tension in cable AD. Since we don't have any information about the tension in cable AD, we'll refer to it as TAD.

As mentioned earlier, the tension in cable AD is equal to the tension in cable AC. Let's call this tension TAD.

Sum of forces in the y-direction = 0

2TAD - W = 0

Substituting the weight of the crate, we have:

2TAD - 3200 lb = 0

Therefore, the tension in cable AD (and AC) is 1600 lb.

To know more about tension here

https://brainly.com/question/31716145

#SPJ4

The total time required for 95% of the austenite to transform to pearlite is 1997 seconds.

The mass fraction of eutectoid cementite in a Fe-C alloy is 10%. The possible carbon content of this Fe-C alloy is 0.6898 wt%C which is a hypo eutectoid steel. The mass fraction of Fe and C in a Fe-C alloy at 1148 °C is 29.17%. This alloy is slowly cooled down from 1148 °C to 600 °C. The mass fraction of Fe and C at 600 °C is 0.045 wt%C. The kinetics of the austenite-to-pearlite transformation obey the Avrami relationship. It is noted that 20% and 60% of austenite transform to perlite require 280 and 425 seconds, respectively. Therefore, the total time required for 95% of the austenite to transform to pearlite can be calculated using the Avrami equation as follows:

t = (-ln(1-0.95))/k

where k = ln(1/0.8)/280 = ln(1/0.4)/425

t = (-ln(1-0.95))/k = (2.9957)/(0.0015) = 1997 seconds.

Fine pearlite forms for the moderate cooling of austenite through the eutectoid temperature because it allows sufficient time for carbon diffusion to occur and form small cementite particles. Coarse pearlite is the product of relatively slow cooling rates as it does not provide sufficient time for carbon diffusion to occur and form small cementite particles.

Read more about Avrami equation on

https://brainly.com/question/13072736

#SPJ4

To calculate the amount Astrid should withdraw from her college fund of $30000, we need to determine the number of payments (n) for equal withdrawals over four years.

The formula to calculate the number of payments (n) can be derived using the formula for calculating the present value of an annuity.

In this case, the present value (PV) is the college fund amount of $30000, the payment (P) is the equal withdrawal amount, and the interest rate (r) is the annual nominal interest rate divided by the number of compounding periods per year.

By rearranging the formula and solving for n, we can find the desired result.

Learn more about Astrid

brainly.com/question/4298926

#SPJ11

The number of molecules remaining unreacted after 40.0 minutes in a first-order reaction with a half-life of 10.0 minutes, starting with 1.00 g 10^12 molecules of reactant at t=0, is 1.00 x 10^11 molecules.

In a first-order reaction, the number of molecules remaining after a certain time can be determined using the equation N = N0 * (1/2)^(t/t1/2), where N is the number of molecules remaining, N0 is the initial number of molecules, t is the elapsed time, and t1/2 is the half-life of the reaction.

In this case, N0 = 1.00 g 10^12 molecules, t = 40.0 minutes, and t1/2 = 10.0 minutes. Plugging these values into the equation, we get N = (1.00 g 10^12) * (1/2)^(40.0/10.0) = 1.00 g 10^11 molecules.

Therefore, after 40.0 minutes, 1.00 x 10^11 molecules remain unreacted in the first-order reaction.

Know more about first-order reaction here:

https://brainly.com/question/33791779

#SPJ11

The entropy change for the combustion of ethyl alcohol under standard conditions is -548.5 J/K mol.The entropy change for the combustion process under standard conditions can be determined using the equation given below:

∆S°rxn = ΣnS°products - ΣmS°reactants

Here, n and m are the stoichiometric coefficients of the products and reactants, respectively.

S° values are standard entropy values which are available in tables.

For the given reaction,

C2H5OH + 3O2 → 2CO2 + 3H2O, we can calculate the entropy change as follows:

ΔS°rxn = ΣnS°products - ΣmS°reactants= [(2 × 213.8 J/K mol) + (3 × 188.8 J/K mol)] - [(1 × 160.7 J/K mol) + (3 × 205.0 J/K mol)]

= 427.2 J/K mol - 975.7 J/K mol= -548.5 J/K mol

Therefore, the entropy change for the combustion of ethyl alcohol under standard conditions is -548.5 J/K mol.

Learn more about entropy change

https://brainly.com/question/31428398

#SPJ11

To calculate the value of Kc that makes the system stable, we need to consider the stability criterion. For a system to be stable, the poles of the transfer function should have negative real parts.

Let's analyze each given transfer function:

1. Gp = 10 -; Gv = 1; Gm = 1; (2s^2 + 3s - 4)^2

The transfer function can be simplified as follows:
G = Gp * Gv * Gm = 10 * 1 * 1 * (2s^2 + 3s - 4)^2

We need to find the poles of the transfer function. The poles are the roots of the denominator of the transfer function.

2s^2 + 3s - 4 = 0

To find the roots of this quadratic equation, we can use the quadratic formula:

s = (-b ± √(b^2 - 4ac)) / (2a)

By substituting the values a = 2, b = 3, and c = -4 into the formula, we can calculate the roots.

s = (-3 ± √(3^2 - 4*2*(-4))) / (2*2)
s = (-3 ± √(9 + 32)) / 4
s = (-3 ± √41) / 4

The poles have both real and imaginary parts, so the system is not stable.

2. Gp = 1 -; Gv = 1; Gm = 1; (1053 +252 + 5-5)

The transfer function can be simplified as follows:
G = Gp * Gv * Gm = 1 * 1 * 1 * (1053 + 252 + 5 - 5)

The denominator does not contain any variable, so there are no poles. Therefore, the system is stable.

3. Gp = 4es; Gv = 2; Gm = 0.25; (5s + 1)

The transfer function can be simplified as follows:
G = Gp * Gv * Gm = 4es * 2 * 0.25 * (5s + 1)

We need to find the poles of the transfer function. The poles are the roots of the denominator of the transfer function.

5s + 1 = 0

By solving this equation, we can find the root.

s = -1/5

The pole has a negative real part, so the system is stable.

4. Gp = 0.5e^(-3s); Gv = 1; Gm = 1; (10^5 + 1) / 0.5

The transfer function can be simplified as follows:
G = Gp * Gv * Gm = 0.5e^(-3s) * 1 * 1 * ((10^5 + 1) / 0.5)

We need to find the poles of the transfer function. The poles are the roots of the denominator of the transfer function.

e^(-3s) = 0

Since the exponential function is always positive, there are no poles. Therefore, the system is stable.

5. Gp = -; Gv = 1; Gm = (0.5s + 1.5s + 1) / (6s + 3)

The transfer function can be simplified as follows:
G = Gp * Gv * Gm = - * 1 * ((0.5s + 1.5s + 1) / (6s + 3))

We need to find the poles of the transfer function. The poles are the roots of the denominator of the transfer function.

6s + 3 = 0

By solving this equation, we can find the root.

s = -1/2

The pole has a negative real part, so the system is stable.

To summarize:

- For the given transfer functions, the system is stable for the following values of Kc:
 - 2. Gp = 1 -; Gv = 1; Gm = 1; (1053 + 252 + 5 - 5)
 - 3. Gp = 4es; Gv = 2; Gm = 0.25; (5s + 1)
 - 4. Gp = 0.5e^(-3s); Gv = 1; Gm = 1; ((10^5 + 1) / 0.5)
 - 5. Gp = -; Gv = 1; Gm = (0.5s + 1.5s + 1) / (6s + 3)

I hope this helps! Let me know if you have any further questions.

learn more about  transfer function on :

https://brainly.com/question/24241688

#SPJ11

We apply the equation to determine the maximal biomass productivity (DX, in kg/m3/h): DX = μm * X

To achieve a 90% substrate conversion rate in the microbial incubator, we need to determine the inflow flow rate (F, in m3/h) required.

First, let's define the parameters given in the question:
- Inflow substrate concentration (S0) = 20 kg/m3
- Microorganism growth rate (μm) = 0.45 h-1
- Substrate saturation constant (Ks) = 0.8 kg/m3
- Biomass yield coefficient (YMX/S) = 0.55 kg/kg

To achieve 90% substrate conversion rate, we need to calculate the concentration of the substrate when 90% of it has been consumed (S90).

Using the Monod equation:
μm = μm * (S0 / (Ks + S0))

Solving for S0, we get:
S90 = Ks * (μm / (μm - μm * 0.9))

Next, we can calculate the volumetric rate of substrate consumption (qS) using the equation:
qS = μm * X / YMX/S

Now, we can determine the inflow flow rate (F):
F = qS / (S0 - S90)

Finally, to find the maximum biomass productivity (DX, in kg/m3/h), we use the equation:
DX = μm * X

Since kd, ms, and qp are negligible, we don't need to consider them in our calculations.

Learn more about microbial incubator from this link

https://brainly.com/question/29483350

#SPJ11

a. Cd metal will not dissolve in HCl.

b.  O₂ can oxidize Fe²⁺ to Fe³⁺.

c. Ni can reduce Sn²⁺ but cannot reduce Co²⁺.

d. Cl₂ gas is a stronger oxidizing agent than O₂ gas.

e. F₂ gas can oxidize water

To determine whether the given reactions would take place, we can use the standard electrochemical series. The electrochemical series ranks the elements and ions based on their tendency to undergo reduction or oxidation reactions. In general, a reaction will occur if the species being oxidized is higher in the series than the species being reduced.

a. Looking at the electrochemical series, we find that Cd is below hydrogen (H+) in the series. This means that Cd has a lower tendency to undergo oxidation compared to hydrogen. Therefore, Cd metal will not dissolve in HCl.

b. In the electrochemical series, O₂ is above Fe²⁺. This indicates that O₂ has a higher tendency to undergo reduction compared to Fe²⁺. Therefore, O₂ can oxidize Fe²⁺ to Fe³⁺. The balanced half-reactions and the overall reaction can be written as follows:

Half-reaction at the cathode (reduction): O₂ + 4H⁺ + 4e⁻ → 2H₂O

Half-reaction at the anode (oxidation): Fe²⁺ → Fe³⁺ + e⁻

Overall reaction: 2Fe²⁺ + O₂ + 4H⁺ → 2Fe³⁺ + 2H₂O

c. Referring to the electrochemical series, Ni is above Sn²⁺ but below Co²⁺. This means that Ni has a higher tendency to undergo reduction compared to Sn²⁺ but a lower tendency compared to Co²⁺. Therefore, Ni can reduce Sn²⁺ but cannot reduce Co²⁺.

d. Comparing Cl₂ and O₂ in the electrochemical series, we find that Cl₂ is higher than O₂. This indicates that Cl₂ has a higher tendency to undergo reduction compared to O₂. Therefore, Cl₂ gas is a stronger oxidizing agent than O₂ gas.

e. Looking at the electrochemical series, we see that F₂ is above O₂. This indicates that F₂ has a higher tendency to undergo reduction compared to O₂. Therefore, F₂ gas can oxidize water. The balanced half-reactions and the overall reaction can be written as follows:

Half-reaction at the cathode (reduction): F₂ + 2e⁻ → 2F⁻

Half-reaction at the anode (oxidation): 2H₂O → O₂ + 4H⁺ + 4e⁻

Overall reaction: F₂ + 2H₂O → 2F⁻ + O₂ + 4H⁺

Learn more about oxidation at https://brainly.com/question/31967581

#SPJ11

Granulation is a process that involves several competing physical phenomena that occur in the granular, leading to the formation of the granules.

These phenomena are classified into four categories: nucleation, coalescence, growth, and attrition.

Nucleation: Nucleation refers to the formation of tiny particles (nuclei) that serve as the initial sites for granule growth. This method usually occurs as a result of high levels of supersaturation, mechanical agitation, or the presence of additives that function as nucleating agents.

Nucleation must occur quickly and in large quantities for the process to be efficient.

Coalescence: Coalescence occurs when nucleated particles merge to create more significant particles. Coalescence, like nucleation, occurs as a result of mechanical agitation.

The rate of coalescence is primarily determined by the degree of supersaturation and the viscosity of the liquid feed.

Growth: Granule growth can be divided into two categories: wetting and agglomeration.

Wetting occurs when liquid droplets wet the nucleated particles' surface, leading to the formation of a granule.

As a result of surface energy considerations, the wetting rate is a strong function of the solid-liquid interfacial tension.

Wetting leads to granule growth by providing a means for solid-liquid mass transfer.

Agglomeration, on the other hand, involves the merging of solid particles that are wetted by the binder droplets.

The degree of particle adhesion and binder concentration governs the rate of agglomeration. The size of the granules grows at a steady rate as agglomeration occurs.

Attrition: Attrition is the term for the loss of particles from the granule surface due to mechanical forces. A

ttrition occurs as a result of shearing forces caused by agitation, impaction, or compression.

Granule strength is a function of the binding strength and the degree of attrition undergone by the granules.

Know more about Granulation  here:

https://brainly.com/question/31634578

#SPJ11

a. The limiting reactant is the reactant that produces a smaller amount of NO, and b. The mass (in grams) of NO that can be produced is calculated by multiplying the moles of NO produced by the molar mass of NO.

The first step is to determine the balanced chemical equation for the reaction between NH3 and O2. The balanced equation is:

4NH3 + 5O2 → 4NO + 6H2O

Next, calculate the moles of NH3 and O2 using their respective masses and molar masses:

Molar mass of NH3 = 17.03 g/mol
Molar mass of O2 = 32.00 g/mol

Moles of NH3 = 2.50 g / 17.03 g/mol
Moles of O2 = 8.50 g / 32.00 g/mol

Now, we can determine the limiting reactant. The limiting reactant is the reactant that is completely consumed, limiting the amount of product that can be formed. To find the limiting reactant, compare the moles of NH3 and O2 and see which one produces a smaller amount of product (NO) when using the stoichiometric ratio from the balanced equation.

From the balanced equation, we can see that 4 moles of NH3 react with 5 moles of O2 to produce 4 moles of NO. Therefore, the stoichiometric ratio is 4:5.

Moles of NO produced from NH3 = (Moles of NH3) x (4 moles of NO / 4 moles of NH3)
Moles of NO produced from O2 = (Moles of O2) x (4 moles of NO / 5 moles of O2)

Compare the moles of NO produced from NH3 and O2. The reactant that produces a smaller amount of NO is the limiting reactant.

Finally, to calculate the mass of NO that can be produced, multiply the moles of NO produced by the molar mass of NO:

Mass of NO = (Moles of NO) x (Molar mass of NO)

Therefore, a. The limiting reactant is the reactant that produces a smaller amount of NO, and b. The mass (in grams) of NO that can be produced is calculated by multiplying the moles of NO produced by the molar mass of NO.

Learn more about  limiting reactant mass:

https://brainly.com/question/26905271

#SPJ11

To convert the base-6 number 1523 to base-10, we find that it is equal to 411 in base-10.

To convert the base-10 number 823 to base-6, we find that it is equal to 3451 in base-6.

To convert a base-6 number to base-10, we can use the positional notation. Each digit in the base-6 number represents a power of 6.

For the base-6 number 1523:

1 × 6^3 + 5 × 6^2 + 2 × 6^1 + 3 × 6^0 = 1 × 216 + 5 × 36 + 2 × 6 + 3 × 1 = 216 + 180 + 12 + 3 = 411

So, the base-10 representation of 1523 is 411.

To convert a base-10 number to base-6, we can use the process of division and remainders.

For the base-10 number 823:

Divide 823 by 6:

823 ÷ 6 = 137 remainder 1

Divide 137 by 6:

137 ÷ 6 = 22 remainder 5

Divide 22 by 6:

22 ÷ 6 = 3 remainder 4

Divide 3 by 6:

3 ÷ 6 = 0 remainder 3

The remainders in reverse order give us the base-6 representation: 3451.

So, the base-6 representation of 823 is 3451.

To learn more about base-10 number visit : https://brainly.com/question/19460684

#SPJ11

Answer: Should be 13

Step-by-step explanation:

4 times 4 = 16

3 times 3 = 9
16 plus 9 = 25

the square root of 25 is 5
5 squared is 25

12 squared is 144

144 plus 25 = 169

the square root of 169 = 13

P-Q = 13

By comparing PIZ > 7 | Z > 4 and P[Z > 3], we can see that they are not equal. The probabilities involve different terms and are calculated based on different conditions. Therefore, the statement "PIZ > 7 | Z > 4 = P[Z > 3]" is not true.

Let's calculate the probabilities involved in the question.

PIZ > 7 | Z > 4 is the probability that Z is greater than 7, given that Z is greater than 4.

P[Z > 3] is the probability that Z is greater than 3.

To calculate these probabilities, we need to understand the distribution of Z. Z represents the number of coffee shops Alexis must visit until she likes 3 coffee shops. Each visit to a coffee shop is an independent event with a probability of 0.4 of liking the shop.

To calculate the probabilities, we can use the geometric distribution, which models the number of trials needed to achieve the first success. In this case, the first success is Alexis liking a coffee shop.

The probability mass function (PMF) of the geometric distribution is given by:

P(X = k) = (1 - p)^(k-1) * p

Where:

- X is the random variable representing the number of trials needed until the first success.

- k is the number of trials needed.

- p is the probability of success.

In our case, we want to find the probabilities PIZ > 7 | Z > 4 and P[Z > 3]. Let's calculate these probabilities using the geometric distribution.

P[Z > 3] = P(Z = 4) + P(Z = 5) + P(Z = 6) + ...

We can calculate the individual probabilities:

P(Z = 4) = (1 - 0.4)^(4-1) * 0.4 = 0.144

P(Z = 5) = (1 - 0.4)^(5-1) * 0.4 = 0.0864

P(Z = 6) = (1 - 0.4)^(6-1) * 0.4 = 0.05184

...

Summing up these probabilities, we find:

P[Z > 3] = 0.144 + 0.0864 + 0.05184 + ...

To calculate PIZ > 7 | Z > 4, we need to consider the conditional probability. Given that Z > 4, we only consider the probabilities starting from Z = 5:

PIZ > 7 | Z > 4 = P(Z = 5) + P(Z = 6) + P(Z = 7) + ...

To find these probabilities, we can use the same formula as before:

P(Z = 5) = (1 - 0.4)^(5-1) * 0.4 = 0.0864

P(Z = 6) = (1 - 0.4)^(6-1) * 0.4 = 0.05184

P(Z = 7) = (1 - 0.4)^(7-1) * 0.4 = 0.031104

...

Summing up these probabilities, we find:

PIZ > 7 | Z > 4 = 0.0864 + 0.05184 + 0.031104 + ...

To know more about Probability, visit

https://brainly.com/question/30390037

#SPJ11