The new pressure in the cylinder of the car engine as the piston is moved to the top is 1062.55kPa
Boyle's lawBoyle's law states that "volume of a given quantity of gas is inversely proportional to its pressure as long as temperature remains constant.
It is expressed as;
P₁V₁ = P₂V₂
Given the data in the question;
Initial volume V₁ = 0.6250LNew volume V₂ = 0.0600LInitial pressure P₁ = 765.1mmHg = 1.0067107atmNew pressure P₂ = ?To determine the new pressure as the piston is at the top of the cylinder, we substitute our given values into the expression above.
P₁V₁ = P₂V₂
P₂ = P₁V₁ / V₂
P₂ = ( 1.0067107atm × 0.6250L ) / 0.0600L
P₂ = 0.629194188Latm / 0.0600L
P₂ = 10.4865698atm
P₂ = 1062.55kPa
Therefore, the new pressure in the cylinder of the car engine as the piston is moved to the top is 1062.55kPa
Learn more about Boyle's law here: brainly.com/question/1437490
what is daily product ? Any ten point
Answer:
the interest applied on the end of day balance.
Explanation:
How does a specific theory compare to a scientific law
Do you mean scientific theory? If so, then scientific theories and laws are principles which can be used to better understand the world and space around us.
Oleic acid, a component of olive oil, is 76.54% C, 12.13% H, and 11.33% 0. The
experimental value of the molar mass is 282 g/mol.
a. What is the molecular formula of oleic acid?
b. If oleic acid has a density of 0.895 g/mL, how many molecules of oleic acid
are in 3.00 mL of oleic acid?
Answer:
a) The molecular formula of oleic acid is: [tex]C_{18}H_{34}O_{2}[/tex]
b) There are 5.74 x 10^21 molecules of oleic acid in a 3.00 mL sample.
Explanation:
a)
First, let's determine the empirical formula of oleic acid from the percentage composition provided by the question:
- Assuming a 100g sample of oleic acid, the correspondent mass of C, H and O would be:
mass of C = 76.54g
mass of H = 12.13g
mass of O = 11.33g
- We must determine the number of moles contained in each of the masses determined above. For that, let's use the atomic masses of C (12.01 u), H (1.007 u) and O (15.99 u) and the following equation:
[tex]number of moles = \frac{mass of sample}{molar mass}[/tex]
number of moles of C = 76.54g / 12.01 g/mol = 6.373 mol C
number of moles of H = 12.13g / 1.007 g/mol = 12.04 mol H
number of moles of O = 11.33g / 15.99 g/mol = 0.7086 mol O
- Next, we'll try to find whole-number ratios by dividing each number of moles obtained by the smallest value obtained (0.7086):
C = 6.373 / 0.7086 = 8.994 ≅ 9
H = 12.04 / 0.7086 = 16.99 ≅ 17
O = 0.7086 / 0.7086 = 1.000
- Now, we can write the empirical formula of oleic acid as: [tex]C_{9}H_{17}O[/tex]
Now that we have the empirical formula for oleic acid (C9H17O), let's check its molar mass and compare it to the experimental value provided by the question (282 g/mol):
molar mass (C9H17O) = 9 * 12.01 + 17 * 1.007 + 1 * 15.99 = 141.9 g/mol
Note that the molar mass obtained from the empirical formula (141.9 g/mol) and the experimental molar mass (282 g/mol) are different, thus we need to find an integer multiple to determine the molecular formula (keep in mind that molecular formulas always present kind and number of atoms of each element present in the molecular compound, while the empirical formula presents the smallest coefficients for each atom).
Molecular formula = n × Empirical formula
This integer multiple, n, can be obtained by dividing the molar mass, MM , of the compound by the empirical formula mass, EFM (the molar mass represented by the empirical formula):
n = MM / EFM
n = 282 / 141.9
n = 1.987 ≅ 2
Since the integer multiple is 2, we can multiply all coefficients in the empirical formula by 2 to find the molecular formula of oleic acid:
C9 H17 O x 2 = C18 H34 O2
Therefore, the molecular formula of oleic acid is: [tex]C_{18}H_{34}O_{2}[/tex]
b)
We need to calculate the amount of molecules of oleic acid in a 3.00mL sample, considering the density as 0.895 g/mL.
From the density provided, we can calculate the mass, in grams, of oleic acid contained in 3.00 mL of this compound:
1 mL ----------------------- 0.895 g oleic acid
3.00 mL ----------------- x
Solving for x, we have that there are 2.69 g of oleic acid in a 3.00 mL sample.
Next, considering the molar mass of oleic acid (282 g/mol), we can calculate the number of moles contained in 2.685g of the acid:
282 g -------------------- 1 mol oleic acid
2.69 g ----------------- y
Solving for y, we have that there are 0.00953 moles of oleic acid in a 3.00 mL sample.
Now, using the Avogadro's number (6.022 x 10^23 particles/mol), we can calculate the amount of molecules of oleic acid in the sample:
1 mol oleic acid ------------------------------- 6.022 x 10^23 molecules oleic acid
0.00953 mol oleic acid ------------------- z
Solving for z, we have that there are 5.74 x 10^21 molecules of oleic acid in a 3.00 mL sample.
okay this is the only way to get my answers
Answer:
Your answer is Answer thank me later :) <3
Explanation:
pls pls help me with this
Answer:
1. lava
2. caldera
3. true
4. true
5. before
Where does runoff end up?
a)ponds
b)streams
c)rivers
d)all of the above
Answer:
All of the above :D
Explanation:
When rain falls, if it doesn't get absorbed by the dirt, it will go into streams, rivers, and ponds. That is actually how flooding is caused!!! :D
Have an amazing day!!
Please rate and mark brainliest!!
A 25.0-L balloon at 20.0 ⁰C is placed in a hot water bath at 90 ⁰C. After 15 minutes, the volume of the balloon stops expanding. What is the new volume of the balloon?
Apply Charles law
V1T2=V2T125(90)=20V225(9)=2V2225=2V2V2=225/2V2=112.5L100 points! Please help if you are able to.
Here are the balanced equations
C_2H_5OH+3O_2--->2CO_2+3H_2O+Energy2AgCl-->2Ag+Cl_2AgNO_3+Zn--->Ag+ZnNO_33BaCl_2+Al_2(SO_4)_3--->3BaSO_4+2AlCl_3H_2+I_2--->2HIDone!
A graphic designer has the choice to download design software on her computer and then design a logo or to use an online
version of the software to design the logo. Identify one advantage and one disadvantage of using the online software to design
the logo 2 points)
An online version is the availability of the application on the web and the internet. The online version of the logo designer is advantageous as it provides more customization choices.
What is logo designing?A logo design is a method to create logos that represent the brand of the business corporation or any other organization, it represents the company and brand.
Online software for logo designing provides more choices for customization as more fonts, styles, graphics, colors, and effects are present in online software.
The use of online software can be disadvantageous as it can be copied. The same tool and online data can be used to create the same logo and can be harmful to the company.
Therefore, using online software for logo designing can be both advantageous and disadvantageous.
Learn more about logo designing here:
https://brainly.com/question/1493739
#SPJ1
Answer:
Explanation:first one
The picture shows the cubic unit cell of CaF2. How many Ca2+ ions and F- ions are present in the cubic unit cell?
The total number of Ca2+ ions and F- ions that are present in the cubic unit cell will be 4 and 8 respectively.
How to calculate the unit cell?From the complete information, the number of Ca2+ at corners will be (8 × 1/8 = 1) and those a the center will be (6 × 1/2 = 3). Therefore, the total number of Ca2+ will be:
= 1 + 3 = 4
The total number of F- ions will be:
= 4 × 2 = 8
Learn more about unit cell on:
https://brainly.com/question/15070277
plss help me with this I don't even know where to start to solve it
From the balanced equation of the reaction, the coefficients of the reactants and products are 1:2:1.
What is a balanced equation of a chemical reaction?A balanced equation of a chemical reaction is an equation which balances the atoms of each element on the reactants as well as the products side of a chemical reaction.
The balanced equation of the reaction that occurs when magnesium bromide is heated is shown below:
[tex]MgBr_2 \rightarrow Br_2+Mg [/tex]
Therefore, the coefficients of the reactants and products are 1:2:1.
Learn more about balanced equations at: https://brainly.com/question/26227625
Ethanoic acid has a pKa of 4.75. Find the pH of the solutions that results from the addition of 40.0 mL of 0.040 M NaOH to 50.0 mL of 0.075 M ethanoic acid.
Answer:
About 4.63.
Explanation:
The reaction between ethanoic acid (CH₃COOH) and sodium hydroxide (NaOH) can be described by the following net ionic equation:
[tex]\displaystyle \text{CH$_3$COOH}_\text{(aq)} + \text{OH}^-_\text{(aq)}\longrightarrow \text{CH$_3$COO}^-_\text{(aq)} + \text{H$_2$O}_\text{($\ell$)}[/tex]
40.0 mL of 0.040 M NaOH contains:
[tex]\displaystyle 40.0\text{ mL} \cdot \frac{0.040\text{ mol NaOH}}{1000\text{ mL}} = 0.0016\text{ mol NaOH}[/tex]
Because NaOH is a strong base, it dissociates completely. Hence, the amount of OH⁻ present is 0.0016 mol. Na⁺ acts as a spectator ion.
50.0 mL of 0.075 M CH₃COOH contains:
[tex]\displaystyle 50.0\text{ mL} \cdot \frac{0.075\text{ mol CH$_3$COOH}}{1000\text{ mL}} = 0.0038\text{ mol CH$_3$COOH}[/tex]
OH⁻ is the limiting reagent of the reaction. Therefore, as the reaction proceeds to completion:
The amount of OH⁻ drops to 0 mol. The amount of CH₃COOH decreases to (0.0038 - 0.0016) mol = 0.0022 mol. And the amount of CH₃COO⁻ increases to (0 + 0.0016) mol = 0.0016 mol.Note that all species present are in a one-to-one ratio.
To find pH, we can use the Henderson-Hasselbalch equation:
[tex]\displaystyle \text{pH} = \text{p}K_a + \log\frac{[\text{Base}]}{[\text{Acid}]}[/tex]
The total volume of the solution is 40.0 mL + 50.0 mL = 90.0 mL.
Hence, find [CH₃COOH]:
[tex]\displaystyle \left[\text{CH$_3$COOH}\right] = \frac{0.0022\text{ mol}}{90.0\text{ mL}} \cdot \frac{1000\text{ mL}}{1\text{ L}} = 0.024\text{ L}[/tex]
Find [CH₃COO⁻]:
[tex]\displaystyle \left[\text{CH$_3$COO}^-\right] = \frac{0.0016\text{ mol}}{90.0\text{ mL}}\cdot \frac{1000\text{ mL}}{1\text{ L}} = 0.018\text{ M}[/tex]
Therefore, the pH of the resulting solution is:
[tex]\displaystyle \begin{aligned}\text{pH} & = \text{p}K_a + \log\frac{[\text{Base}]}{[\text{Acid}]} \\ \\ & = (4.75) + \log \frac{(0.018)}{(0.024)} \\ \\ & = 4.75 + (-0.12) \\ \\ & = 4.63\end{aligned}[/tex]
In conclusion, the pH of the resulting solution is about 4.63.
How many molecules are there in a 42.3g sample of water
Answer:
This means that one mole of water molecules has a mass of 18.015g.
42.3g * 1 mole H2O/18.015g
= 2.3480 moles H2O
We are using the avogadros number to find the number of molecules of water
2.3480 H2O * 6.022*10^ 23moles/ 1mole of H2O
That's 2.3480 multiplied by 6.022*10^23 divided by 1 mole of H2O
Number of molecules = 1.4140 *10^24 molecules
Which of the following is an example of chemical weathering?
A. A river carrying dirt into a lake.
B. Wind carrying sand from a beach.
C. Chemicals in water dissolving minerals in rock.
D. Friction between two rock surfaces grinding away minerals.
Answer:
C
Explanation:
Answer: D. Friction between two rock surfaces grinding away minerals.
Explanation: chemical weathering involves erosion from rocks/materials
Write a net ionic equation for the reaction that occurs when excess hydroiodic acid and chromium(II) carbonate (s) are combined.
Step 1: Write the balanced "molecular equation:
[tex]2HI(aq) + CrCO₃ (s) → CrI₂ (s) + H₂O(l) + CO₂(g)[/tex]
Step 2: Carbon dioxide and water are written in molecular form. Consult the solubility and net ionic equation rules on the information page to determine which of the other substances will dissociate:
[tex]2HI(aq) + CrCo₃ (s) → Crl₂ (s) +H₂O(l)+CO₂(g)[/tex]
yes no yes
Step 3: Dissociate all soluble salts, strong acids, and strong bases (except calcium hydroxide), Leave together all "not soluble" salts and weak acids or bases:
[tex] {2H₂O}^{ + } (aq) + {2I}^{ - } (aq) + CrCO₃ (s)→ {Cr}^{2 + } (aq) + {2I}^{ - }(aq) + 3H₂O(l) + CO₂(g)[/tex]
Step 4: Cross out "spectator lons that appear on both sides of the reaction (these lons do not participate in the chemistry) and rewrite the "net" reaction using the smallest possible coefficients:
[tex] {2H₂O}^{ + } (aq) + CrCO₃ (s) →3H₂O + CO₂ + {Cr}^{2 + } [/tex]
Which of the following conversions is/are incorrect.
a.1 meter = 1000 millimeters
b.100 millimeters = 1 centimeter
c.500 centimeters = 0.5 meters
d. 1 kilometer = 1000 meters
C+A
B+ C
D+ C
A+B
Answer:
B + C ARE INCORRECT FROM THE ABOVE GIVEN CONVERSIONS.
A student observes the phenomenon where a straw has a different appearance when placed in water. Once this was noted by the student, they then immediately thought about why they have been unable to successfully catch fish when spearing them in the water. Relate these two phenomenon and select ALL statements that apply to the phenomena described here.
A)The water distorts the image of the fish so that its image is inverted.
B)The student is not aiming correctly due to refraction of the fish in the water.
C)The water magnifies the image, making the target fish look bigger than it actually is.
D)The light waves travel at a different speed in water and make the fish appear farther away.
E)The diffraction of the light around objects flips the image from left to right, making aiming for fish more of a challenge.
Answers are B and D
Answer:
b, and d
Explanation:
if the student did not aim correctly, and for d if the light waves travelled differently
When fossil fuels are burned, they release pollutants into the air. When hydrogen is burned, it produces clean water. There are limited amounts of fossil fuels that can be uncovered by digging in the Earth. Hydrogen must be produced from other materials, such as water, which requires using energy.
In order to determine whether replacing fossil fuels with hydrogen would be good for the environment, what question must be answered?
Answer: can hydrogen produce as much energy as burning fossil fuels?
Explanation:
Why is sodium chloride not considered a molecular compound? What kind of compound is it?
Answer:
Something like table salt (NaCl) is a compound because it is made from more than one kind of element (sodium and chlorine), but it is not a molecule because the bond that holds NaCl together is an ionic bond. If you like, you can say that sodium chloride is an ionic compound.
Explanation:
Aerobic decomposition of organic matter requires
A.nitrogen.
B.oxygen.
C.carbon dioxide.
D.water.
Answer:
Option B: Oxygen.
Explanation:
Hope this helped.
Which of the following compounds will have the lowest molar solubility in pure water?
a-AgBrO3, Ksp = 5.38 x 10-5
b-MnCO3, Ksp = 2.24 x 10-11
c-Hgs, Ksp = 1.60 x 10-54
d-Zns, Ksp = 2.00 x 10-25
e-SrS04, Ksp = 3.44 x 10-7
Answer:
C
Explanation:
It has the lowest Ksp, so it will have the lowest Molar Solubility
Wildfires displace many animals and leave behind ash and soot-covered habitats for the animals that
survive. If a wildfire
occurred in the Everglades, which insect would be the
most likely to survive
predators in an ash and soot-covered habitat? (SC.5.L. 15.1)
A. Red dragonfly
B. Green grasshopper
C. Brightly colored butterfly
D. Gray-colored speckled moth
7. A group of students is using models to explore the relationship between the shape of a bird's beak
the type of food it eats. The students design an investigation using classroom items as beaks. Each
If a wildfire occurred in the Everglades, the insect which most likely to survive predator is gray-colored speckled moth.
What are predators?Predators are those animals which for their survival will hunt or kill another animals for the fulfilment of their food need.
If wildfire occured in the everglades region then the insect would be the most likely to survive predators in an ash and soot covered habitat is gray-colored speckled moth which is also known as darwin moth as it takes part in evolution of natural process.
Hnece the required animal is gray-colored speckled moth.
To know more about predators, visit the below link:
https://brainly.com/question/10790484
#SPJ1
During complete metamorphosis, what best describes the transformation from a larva to a pupa?
The larva goes through a big change in color.
The larva might form a cocoon or a chrysalis.
The larva might hatch into an adult.
The larva sheds its skin several times.
Answer:The larva might form a cocoon or a chrysalis.
Explanation:
Which element has the highest 2nd ionization energy?
A. Be
B. C
C. Li
D. B
Answer:
The answer is c.........
Which chemical symbol describes an element? C2H6 Cl2 H2O2 CuSO4
Answer:
Cl2
Explanation:
Chlorine is a diatomic element so it is Cl 2
the others are MOLECULES (made up of atoms of ELEMENTS)
whats ur favorite type of subject in school
Answer:
MAthhh
Explanation:
Give me a brainly
Answer:
My favorite subject in school is P.E or Language arts
Explanation:
What is the molarity of 4 g of NaCl in 3,800 mL of solution?
Answer:
.018 M
Explanation:
Mole weight of NaCl (from periodic chart) = 58.44 g /mole
4 g / 58.44 gm/mole = .06845 mole
.06845 mole / (3.8 liter ) = .018 M
6.11C In 1976, the Viking I Lander was sent to Mars to analyze atmospheric gases and soil samples. The Viking I Lander was most likely a
a space probe.
b lunar module.
c space shuttle.
d natural satellite.
What type of microorganism turns milk into yogurt?
For yogurt production, probiotic bacteria and the Streptococcus thermophilus strain work together to produce a stable balance of bacteria in the culture.
If 25.0 mL of a 2.00 M HCl solution is diluted to 2.00 L, what is the molarity of the new solution?
The molarity of a new solution that has a volume of 25.0 mL of a 2.00 M HCl solution and diluted to 2.00 L is 0.025M.
How to calculate molarity of a solution?The molarity of a solution can be calculated using the following formula:
C1V1 = C2V2
Where;
C1 = initial concentrationC2 = final concentrationV1 = initial volumeV2 = final volume2 × 25 = 2000 × C2
50 = 2000C2
C2 = 50 ÷ 2000
C2 = 0.025M
Therefore, the molarity of a new solution that has a volume of 25.0 mL of a 2.00 M HCl solution and diluted to 2.00 L is 0.025M.
Learn more about molarity at: https://brainly.com/question/19694949