tetracycline is an antibiotic containing multiple functional groups. which functional groups are present in this molecule? (select all that apply).

The mass of [tex]Ag_2SO_4[/tex] precipitates out is 3.8975 g

We need to use the stoichiometry of the chemical reaction between [tex]AgNO_3[/tex] and [tex]Na_2SO_4[/tex] to determine how much [tex]Ag_2SO_4[/tex] will be formed. The balanced chemical equation for the reaction is:

[tex]AgNO_3 + Na_2SO_4[/tex] → [tex]Ag_2SO_4 + 2NaNO_3[/tex]

Moles of [tex]AgNO_3[/tex] = volume (in L) × molarity

                            = 0.025 L × 0.500 mol/L

                            = 0.0125 mol

Moles of [tex]Na_2SO_4[/tex] = volume (in L) × molarity

                             = 0.040 L × 0.250 mol/L

                             = 0.010 mol

The number of moles of [tex]Ag_2SO_4[/tex] formed is equal to the number of moles of [tex]AgNO_3[/tex]:

Moles of Silver nitrate ([tex]Ag_2SO_4[/tex]) = 0.0125 mol

Calculate the mass of [tex]Ag_2SO_4[/tex]:

Mass of [tex]Ag_2SO_4[/tex]= moles of [tex]Ag_2SO_4[/tex] × molar mass

Mass of [tex]Ag_2SO_4[/tex] = 0.0125 mol × 311.8 g/mol

Mass of [tex]Ag_2SO_4[/tex] = 3.8975 g

Therefore, the mass of [tex]Ag_2SO_4[/tex] formed is 3.8975 g.

Learn more about Silver nitrate: brainly.com/question/30488792

#SPJ11

Answer:  Mass percent N2 = 79.55% (to 3 significant figures).

To calculate the mass percent of N2 in the mixture, first calculate the molar mass of the mixture, which is:

Molar mass = (3.54g * 1 mol/28.0134 g) + (7.48 l * 1.03 atm * 0.08206 l * atm / (305 K * 0.7302 mol/g))

Molar mass = 3.542 g/mol

Then, calculate the mass percent of N2 in the mixture:

Mass percent N2 = (28.0134 g * 1 mol/3.542 g) * 100%

Mass percent N2 = 79.55% (to 3 significant figures).

Learn more about Mass percent here:

https://brainly.com/question/5394922#

#SPJ11

For the given reaction, the moles of chlorine required to react with 3 moles of phosphorus to completely use up all the phosphorus.

The balanced chemical equation for the reaction is:

P4 + 6Cl2 → 4PCl3

Now, the stoichiometric ratio between P4 and Cl2 can be seen from the balanced equation as 1 mole of P4 reacts with 6 moles of Cl2.

So,

3 moles of P4 will require= 6 moles of Cl2 × (3 moles of P4 / 1 mole of P4)= 18 moles of Cl2

Therefore, 18 moles of Cl2 would be required to react with 3 moles of P4 to entirely use up all the phosphorus.

Note:

The balanced chemical equation is used to calculate the moles of reactants and products involved in a chemical reaction.

The mole ratio between the reactants and products can be determined from the balanced chemical equation.

To know more about the moles https://brainly.com/question/26416088

#SPJ11

The molecular formula of naphthalene is C6H6 if it involves the complete combustion of a 20.10 mg sample of naphthalene in oxygen yielded 69.00 mg of co2 and 11.30 mg of h20.

We have the complete combustion of a 20.10 mg sample of naphthalene in oxygen yielded 69.00 mg of co2 and 11.30 mg of h20.

Mass of C in CO2 is,

       = 12/44 x 69.00

       = 18.82mg

Mass of H in H2O is,

            = 2/18 x 11.30

            = 1.256mg

We have to find Mole ratios.

C= 18.82/12= 1.568

H= 1.256/1= 1.256

Now we have to divide by the smaller mole ratio.

C= 1.568/1.256= 1.2=1

H= 1.256/1.256= 1

So the empirical formula is CH.

The empirical formula of a compound is defined as the formula which gives us the lowest whole number ratio of that particular compound.

A molecular formula is a way of presenting information about the chemical proportions of atoms that constitute a particular chemical compound or molecule.

Empirical formula weight=12+1=13

We can get the mass of the empirical formula can be computed by dividing the molar mass of the compound by it.

Molecular weight=78

n=  Molecular  weight / Empirical  formula  weight

= 78/ 13

=6

Molecular formula=(CH) n​ =(CH) 6​ =C6H6

To learn more about Molecular formula

https://brainly.com/question/15960587

#SPJ4​

The explanation that best describes what beta particles are blocked by is: This type of radiation is blocked by aluminum or metal foil.

Beta particles are high-energy, high-speed electrons or positrons emitted by certain types of radioactive decay. Beta particles have a lower penetrating power than gamma rays and can be stopped by thin layers of materials such as aluminum or metal foil.

However, if the beta particle is more energetic, it may require a thicker material such as plastic, wood or thick clothing to block it. Lead or concrete can also be effective in stopping beta particles, but they are not as effective as they are in blocking gamma rays.

Learn more about beta particles at:

https://brainly.com/question/24312947

#SPJ1

The salt that would be produced by the reaction of H2SO4 with LiHCO3 is option C-Li2SO4.

Lithium sulfate (Li2SO4) is an inorganic compound with the formula Li2SO4. It is a white crystalline material that is soluble in water. The salt would be produced as a result of the following reaction: H2SO4 + LiHCO3 → Li2SO4 + H2O + CO2.

Lithium carbonate (Li2CO3) would not be produced in this reaction because LiHCO3 reacts with H2SO4 to form Li2SO4. Li2S cannot be produced because it requires Li2S2, which is not one of the reactants or products. LiSO4 is not produced because H2SO4 reacts with LiHCO3 to form Li2SO4 instead. Thus, option (c) Li2SO4 is the correct answer.

Learn more about inorganic compounds here:

https://brainly.com/question/17271491

#SPJ11

It will take 3401 seconds for 0.1% of the reactant to remain.  

The half-life of a zero-order reaction is the time taken for the concentration of the reactant to decrease by half. This can be calculated using the equation:


t1/2 = 0.693/k


Where k is the rate constant of the reaction. The amount of time it takes for 0.1% of the reactant to remain, we can use the following equation:


t = (-log(0.001))/k


The rate constant of the reaction can be calculated as:


k = 0.693/t1/2 = 0.693/350 = 0.001988  

t = (-log(0.001))/k = (-log(0.001))/0.001988 = 3401 seconds  


Therefore, it will take 3401 seconds for 0.1% of the reactant to remain.  

to know more about reactant refer here:

https://brainly.com/question/17096236#

#SPJ11

Answer: 330 i just took the test

Explanation:

330 mL of 6.0M sodium hydroxide are required to prepare 2.0L of a 1.0M sodium hydroxide solution. This is done by Molarity method.

A substance's concentration in a liquid is referred to as its molarity, or molar concentration. The substance being dissolved is referred to as a solute, while the liquid is referred to as a solvent. The number of moles per liter is the precise definition of molarity.

Solids, other liquids, or even gases can all dissolve into a liquid and become a solute. Finding molarity is straightforward if you are aware of the solute's molecular weight and the amount of solvent it is dissolved in.

Using the formula M₁×V₁ = M₂×V₂

M₁ = 6.0 M

M₂ = 1.0 M

V₂ = 2.0 L

substituting the values ,

V₁ = 330 mL

To know more about molarity , visit ;

brainly.com/question/8732513

#SPJ1

Therefore, the concentration of Pb2+ ions in the solution is 0.0098 M. The chemical equation describing how lead (II) chloride dissolves in water Pb2+ (aq) + 2Cl- PbCl2 (s) (aq) For this reaction.

Ksp = [Pb2 +] [Cl -] 2 We are provided that the Ksp value of PbCl2 is 1.7 × 10^-5. Also, we are informed that 0.90 moles of Cl- ions have been added to the mixture. We may assume that the concentration of Pb2+ ions is insignificant compared to the concentration of Cl- ions since the stoichiometry of the reaction is 1:2 for Pb2+:Cl-. Let x be the concentration of Pb2+ ions in the solution. Then, the concentration of Cl- ions is 2x (because the stoichiometry is 1:2 for Pb2+:Cl-). The total concentration of Cl- ions in the solution is therefore:

[Cl-]total = 2x + 0.90

Since the solubility product expression for[tex]PbCl2 is Ksp = [Pb2+][Cl-]^2, \\[/tex]we can write:

[tex]Ksp = x(2x + 0.90)^2Solving for x, we get:x = 0.0098 M[/tex]

Therefore, the concentration of Pb2+ ions in the solution is 0.0098 M.

learn more about chemical equation here:

https://brainly.com/question/30087623

#SPJ4

Answer:

Explanation:

The statement mentioned in the question is not a question. However, I can provide some information related to the given statement.Nickel(II) chloride refers to the chemical compound with the formula NiCl2. It is also known as Nickelous chloride. When nickel(II) chloride is dissolved in water, it forms a saturated solution of concentration 1 M (1 mole/Liter). A saturated solution refers to the solution in which no more solute can be dissolved in it at a given temperature and pressure.To summarize, the given statement means that if you dissolve nickel(II) chloride in water, you will obtain a saturated solution of concentration 1 M (1 mole/Liter).

In 1.2 x [tex]10^{24}[/tex] formula units of [tex]Li_{2} (SO)_{4}[/tex], there are roughly 1.993 moles of

[tex]Li_{2} (SO)_{4}[/tex].

Using Avogadro's number, or 6.022 x [tex]10^{23}[/tex] molecules/mol, we can calculate the number of moles of Li2SO4 in 1.2 x [tex]10^{24}[/tex]formula units.

First, we need to figure out how many moles of [tex]Li_{2} (SO)_{4}[/tex]  are needed to equal 1.2 x [tex]10^{24}[/tex]  formula units:

Formula units equal 6.022 x [tex]10^{23}[/tex] per mole of [tex]Li_{2}(SO)_{4}[/tex].

As a result, there are: 1.2 x [tex]10^{24}[/tex] moles of [tex]Li_{2}(SO)_{4}[/tex] in the formula units.

1.993 moles are equal to 1.2 x [tex]10^{24}[/tex] formula units / 6.022 x [tex]10^{23}[/tex] formula units/mol.

Hence, 1.2 × [tex]10^{24}[/tex] formula units of [tex]Li_{2} (SO)_{4}[/tex] contain about 1.993 moles.

To learn more about moles visit:

brainly.com/question/26416088

#SPJ9

At Standard Temperature and Pressure (STP) the volume of the gas at is 216.1 ml.

A sample of ideal gas occupies 208ml at 36.2 degree Celsius and 704 torr what is the volume at stp

For a sample of ideal gas, the relationship between volume, pressure, and temperature is given by the Ideal Gas Law:

PV = nRT

Where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of the gas, R is the universal gas constant, and T is the temperature of the gas.

At STP (Standard Temperature and Pressure), the pressure of the gas is 1 atm and the temperature of the gas is 0°C (273 K). Therefore:

P1 = 704 torr

V1 = 208 mL

T1 = 36.2°C = 309.35 K

P2 = 1 atm

V2 = ?

T2 = 0°C = 273 K

To find V2, we can use the following equation:

V2 = V1(P2/P1)(T1/T2)

Plugging in the given values:

V2 = 208 mL (1 atm/704 torr) (309.35 K/273 K)

V2 = 208 mL (0.939) (1.132)

V2 = 216.1 mL

For more such questions on Standard Temperature and Pressure, click on:

https://brainly.com/question/14820864

#SPJ11

The density of heavy water at 20°C is 0.112 g/ml.

The density of normal water at 20°C is 0.9982 g/ml. To calculate the density of heavy water, we need to consider the difference in mass between normal hydrogen (H) and deuterium (D).

Since deuterium has one proton and one neutron, its mass is about twice that of hydrogen.

Assuming the size of deuterium is the same as normal hydrogen when it is part of water, the molar mass of heavy water would be 2 x 1.0079 g/mol (the molar mass of H2O), or 2.0158 g/mol.

Since the density of a substance is equal to the mass of the substance per unit volume, the density of heavy water at 20°C would be equal to 2.0158 g/mol/18 g/mol, which is equal to 0.112 g/ml.

This is approximately 11.2% greater than the density of normal water at 20°C.

Water consists of two hydrogen atoms bonded to one oxygen atom. In the case of normal water, both hydrogen atoms are normal hydrogen (H), while in heavy water, one of the hydrogen atoms is replaced by deuterium (D).

As deuterium is about twice as massive as hydrogen, its presence increases the mass of the molecule, resulting in a higher density.

The density of heavy water at 20°C is approximately 11.2% greater than the density of normal water, due to the presence of deuterium, which has twice the mass of hydrogen.

By assuming the size of deuterium is the same as normal hydrogen, the expected density of heavy water at 20°C by multiplying the molar mass of water (1.0079 g/mol) by two, giving us a density of 0.112 g/ml.

to know more about density refer here:

https://brainly.com/question/15164682#

#SPJ11

Two elements, sodium (Na) and chlorine (Cl) come together, they form a compound called sodium chloride (NaCl), which is also known as table salt.

Table salt is that it is a chemical ionic compound made up of sodium and chlorine atoms that are bonded together.

Table salt is one of the most common chemical compounds found on earth. It is a white, crystalline substance that is highly soluble in water. It is used in many ways, including cooking, preserving food, and as a seasoning.

Table salt has a number of properties that make it useful in various applications. It is highly reactive with other chemicals, which makes it a good cleaning agent.

It is also highly conductive, which makes it useful in electrochemical applications. Additionally, it is non-toxic, which makes it safe to use in food applications.

Learn more about table salt here:

https://brainly.com/question/5528908

#SPJ11

If the scientist wishes to increase the heat of the boiling water as much as possible, she can increase the heat source's temperature or increase the amount of heat being supplied to the water.

This can be done by increasing the flame on the stove, increasing the power of the heating element, or adding more heat from an external source. However, it is important to note that the boiling point of water is 100°C at standard atmospheric pressure, so the water will not get any hotter than that unless the pressure is increased. Also, caution should be taken when working with boiling water to prevent burns or accidents.

To know more about boiling click here:

brainly.com/question/29319965

#SPJ4

Yes, the solubility of NH4Cl fits the pattern that most solids are more soluble in warm water than in cold water.

On increasing the temperature of the solvent, the solubility of the solute increases. The solubility of NH4Cl, which is an example of a solid, follows this trend. In other words, ammonium chloride (NH4Cl) dissolves more readily in warm water than in cold water.

When water is heated, the kinetic energy of the water molecules increases, causing them to move more rapidly. As a result, more space is created in the water, allowing it to dissolve more solute.

NH4Cl is a soluble salt that dissolves in water with a pH value of less than 7. It is readily soluble in water, with a solubility of 372 g/L at 20 degrees Celsius. As a result, increasing the temperature will increase the solubility of NH4Cl.

Learn more about solids: https://brainly.com/question/19974931

#SPJ11

The distance between atoms widens as their vibrations get more rapid. The substance's state of matter is determined by the movement and spacing of its particles. The thing grows or  enhanced molecular mobility.

Because kinetic energy of a liquid's molecules rises as the temperature does. As a result, the molecules have more flexibility to travel across larger volumes as the forces that attraction between them are eventually overcome.

According to the gas kinetic theory, as a gas's temperature rises, the typical kinetic energy of its molecules rises, leading to more motion. This real gases equation PV=NkT predicts that the increased velocity will increase the gas's outer pressure.

To know more about atoms visit:

https://brainly.com/question/30898688

#SPJ1

The pH after the addition of 0.100 mol NaOH to 1.00 L of a buffer that is 0.700 M HF and 0.553 M NaF. The pH  is 7.031.

To calculate the pH after the addition of 0.100 mol NaOH to 1.00 L of a buffer that is 0.700 M HF and 0.553 M NaF, we can use the Henderson-Hasselbalch equation.

The Henderson-Hasselbalch equation is: pH = pKa + log ([A-]/[HA])

Where [A-] is the concentration of the anion (in this case, NaF) and [HA] is the concentration of the acid (in this case, HF).

pKa for HF is 7.1 x 10-4

Before we add the 0.100 mol NaOH, the pH of the buffer is:

pH = 7.1 x 10-4 + log ([0.553 M NaF]/[0.700 M HF])

= 7.1 x 10-4 + log(0.787)

= 7.1 x 10-4 + -0.103

= 6.997

Now, let's calculate the concentration of NaOH after we add 0.100 mol of it to the buffer. We know that 1 mole of NaOH will produce 1 mole of OH- ions, so the concentration of OH- ions is 0.100 M.

Since the buffer already contains HF and NaF, the total concentration of anions is 0.653 M.

We can now calculate the new pH using the Henderson-Hasselbalch equation:

pH = 7.1 x 10-4 + log([0.653 M anions]/[0.700 M HF])

= 7.1 x 10-4 + log(0.933)

= 7.1 x 10-4 + -0.069

= 7.031

Therefore, the pH of the buffer after the addition of 0.100 mol NaOH is 7.031.

For more such questions on Henderson-Hasselbalch equation , Visit:

https://brainly.com/question/13423434

#SPJ11

To determine the number of moles of KIO3 required to produce 250g of O2, we need to use stoichiometry and the molar mass of O2. the molar mass of O2 The molar mass of O2 is 32 g/mol 16 g/mol for each oxygen atom.

An atom is the basic unit of matter, consisting of a nucleus of protons and neutrons, with electrons in orbit around the nucleus. Atoms are incredibly small, with a diameter of about 0.1 to 0.5 nanometers. The identity of an element is determined by the number of protons in the nucleus of its atoms.

The nucleus is a dense, positively charged central core of an atom that contains protons and neutrons. It is surrounded by negatively charged electrons that orbit around the nucleus in shells or energy levels. The number of protons in the nucleus determines the atomic number and chemical properties of an element. The nucleus also holds most of the mass of an atom. In summary, the nucleus is the central region of an atom where most of its mass is concentrated, and it is made up of protons and neutrons.

To know more about atom visit :

https://brainly.com/question/30898688

#SPJ1

The pressure in the container at the higher temperature would be 3.37 atm.

To solve this problem, we can use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles of gas, R is the universal gas constant, and T is the temperature in Kelvin.

Since the container is sealed and the number of moles of gas cannot change, we can set the initial and final pressures and volumes equal to each other, and solve for the final pressure:

P1V1/T1 = P2V2/T2

Where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2 and T2 are the final pressure and temperature, respectively.

Substituting the given values, we get:

2.62 atm × 35.0 mL / 298.52 K = P2 × 35.0 mL / 357.30 K

Simplifying, we get:

P2 = (2.62 atm × 35.0 mL / 298.52 K) × (357.30 K / 35.0 mL)

P2 = 3.37 atm

Therefore, the pressure in the container at the higher temperature is approximately 3.37 atm.

More on the ideal gas equation can be found here: https://brainly.com/question/28837405

#SPJ1

A. to remove the solvent from a reaction mixture

Flux is a term used to describe the flow of energy, particles, or material in a given area. It is typically used to describe the rate of flow of a certain substance, such as the rate of electrons flowing through a circuit.

Flux is also used to describe the concentration of a certain substance in a given area. For example, the amount of a particular chemical in an environment can be described as a flux. Flux is also used to describe the rate of change in a given system, such as the rate of temperature change in a room over time.

Finally, flux can refer to the rate at which energy is exchanged between two objects, such as the rate of heat exchange between two objects.

Learn more about Flux here:

https://brainly.com/question/29221352

#SPJ1

Cup A represents the independent variable in the experimental set-up. An independent variable is a variable that is changed for each group in an experiment to see what effect it has on the results.

In this case, Cup A is the independent variable because it is the one that is being changed or manipulated in the experiment. For example, in this set-up, cup A might contain different amounts of a certain nutrient to see how it affects the growth of the plants. The dependent variable is what is measured, such as the growth rate of the plants. The control is kept the same (no experimental treatment) to keep the results reliable and to act as a comparison to the experimental results. This control is used to make sure that any changes in the dependent variable are due to the independent variable and not some other factor.

To learn more about  independent variable click here https://brainly.com/question/1479694

#SPJ1

Answer:

The balanced chemical equation for the reaction between hydrochloric acid (HCl) and sodium sulfate (Na2SO4) is:

2 HCl + Na2SO4 → 2 NaCl + H2SO4

This equation shows that two moles of hydrochloric acid react with one mole of sodium sulfate to produce one mole of sulfuric acid. Therefore, we need to first calculate the number of moles of sodium sulfate that react with the given mass of hydrochloric acid, and then use the mole ratio to find the number of moles (and mass) of sulfuric acid produced.

Calculate the number of moles of sodium sulfate:

molar mass of Na2SO4 = 2(23.0 g/mol) + 1(32.1 g/mol) + 4(16.0 g/mol) = 142.1 g/mol

moles of Na2SO4 = mass/molar mass = 13.7 g/142.1 g/mol = 0.0965 mol

Use the mole ratio to find the number of moles of sulfuric acid produced:

From the balanced equation, we see that 2 moles of HCl react with 1 mole of Na2SO4 to produce 1 mole of H2SO4.

So, the number of moles of H2SO4 produced = (0.0965 mol Na2SO4) x (1 mol H2SO4 / 1 mol Na2SO4) = 0.0965 mol H2SO4

Calculate the mass of sulfuric acid produced:

molar mass of H2SO4 = 1(2.0 g/mol) + 1(32.1 g/mol) + 4(16.0 g/mol) = 98.1 g/mol

mass of H2SO4 = moles x molar mass = 0.0965 mol x 98.1 g/mol = 9.50 g

Therefore, 9.50 grams of sulfuric acid are produced when hydrochloric acid reacts with 13.7 grams of sodium sulfate.

Answer:

This is just a quick tip.

Explanation:

An electric current is the movement of particles, starting at the moment when an external voltage is applied at one of the ends of the conductor. That, in turn, generates an electric field on the negatively charged electrons that are attracted to the positive terminal of the external voltage.

Plutonium-239 is a radioactive isotope that has a half-life of 24000 years. When it has decayed to 1% of its original level, it is considered safe.

PLUTONIUM -

As plutonium isotopes decay, they undergo chemical changes. They might change into new elements like uranium or neptunium or into new isotopes of plutonium.

These "daughter products" frequently contain radioactive elements themselves. The atomic number 94 metal element plutonium is radioactive.

Scientists looking for a way to break atoms for use in nuclear weapons made the discovery in 1940. When uranium atoms absorb neutrons in a nuclear reactor, plutonium is produced.

The vast majority of plutonium in the world is produced artificially.

To be considered safe, it must be stored securely for approximately 240,000 years.

How long must the pu-239 be stored securely to be considered safe?

The decay of Plutonium-239 to 1% of its initial level, which is considered safe, requires approximately ten half-lives.

As a result, plutonium-239 must be kept securely for ten times its half-life, or approximately 240,000 years, to be considered safe.

To know more about the plutonium https://brainly.com/question/27920632

#SPJ11

One mole any of which substance contains a total of 6.023 X 10²³ atoms by atoms/molecule.

6.02 X 10²³ units of any given substance make up one mole of that material. The fact that one mole of a material has a mass in grammes that is exactly equal to the substance's formula weight is also significant. As a result, one mole of an element contains 6.02 X 10²³ of the element's atoms and has a mass in grammes equal to the element's atomic weight.

Make sure to be clear about what you're referring to while discussing the diatomic gases, sulphur, and phosphorus, which do not exist as single atoms.

1 mole of substance contains 6.023 X 10²³ molecules.

Volume of solution = 100 mL = 0.1 L

Molarity of solution = 0.02 M

Molarity = number of moles of solute/ Volume of solution (in L)

no. of moles of solute = molarity × volume

=0.02 mol L−1×0.1 L

= 0.002 mol.

Thus, 12.044 x 10²⁰ molecules of H2SO4 are present in 100mL of 0.02 M H2SO4 solution.

Learn more about Mole:

https://brainly.com/question/20432652

#SPJ4

Complete question;

One mole of any substance contains 6.022 × 1023 atoms/molecules. Number of molecules of H2SO4 present in 100 mL of 0.02M H2SO4 solution is.

The complete balanced equation for the neutralization reaction between HCl and NaHCO₃ is:

HCl + NaHCO₃ → NaCl + H₂O + CO₂

The reaction between hydrochloric acid (HCl) and sodium bicarbonate (NaHCO₃) is known as a neutralization reaction. In this reaction, HCl and NaHCO₃ combine to produce NaCl, water, and carbon dioxide.

The reaction can be represented by the following equation: HCl + NaHCO₃ → NaCl + H₂O + CO₂

This reaction already the balanced chemical equation for the reaction since the number of each element in the reactant side is equal to the number of each element in the product side.

Learn more about balanced equation here: https://brainly.com/question/11904811.

#SPJ11

Whether a substance dissolves in a particular solvent depends on several factors, including the solubility of the substance in the solvent, the temperature of the solvent, and the amount of substance and solvent involved.

Solubility refers to the ability of a substance to dissolve in a solvent, which is typically a liquid, gas, or solid.

To find out more about solubility, visit:

https://brainly.com/question/28170449

#SPJ1

Answer:

The general principle of science shown by the lab is: "Changes to one part of a system can affect other parts of the system."

Explanation:

This principle is also known as the principle of interdependence, which states that parts of a system are interconnected and can influence one another. In this case, the lab modeled how changes to Earth's surface, such as deforestation or urbanization, can affect the properties of the atmosphere, such as temperature and composition.