test two different independent variables in his study. the first variable has 3 levels to it (weightlifting interventions - control, light weightlifting routine, or strenuous weightlifting routine), and the second variable is hair length and has 2 levels (short or long). this is a factorial design and will allow him to test the influence of both ivs on his dv (which is strength). using this design, if it is set up as an independent groups design, how many conditions will each participant be assigned to?

Answer:

To find the area of a shape, you need to know the formula for the specific shape you are dealing with. Here are some common shapes and their corresponding area formulas:

Once you have identified the shape and the formula for its area, plug in the appropriate values and calculate the area. Make sure to label your answer with the correct units (e.g. square inches, square feet, etc.).

Answer: 25 tons

Step-by-step explanation:

there are 2000 lb in one ton

50000lb * (1 ton/2000lb) = 25 tons

Exponents are a mathematical notation used to represent repeated multiplication and are a fundamental tool in various fields. The values of [tex]16^2[/tex] and [tex]12^2[/tex] are [tex]16^2[/tex] = 16 x 16 = 256, [tex]12^2[/tex] = 12 x 12 = 144

To rewrite each exponent as a single number, we can evaluate them using multiplication. For example, [tex]16^2[/tex] can be rewritten as 16 x 16, which equals 256. Similarly, [tex]12^2[/tex] can be rewritten as 12 x 12, which equals 144.

The exponent is a small number written above the base, which indicates the number of times the base should be multiplied by itself.

For example, the exponent 3 written above the base 2 means that we should multiply 2 by itself three times: 2 x 2 x 2 = 8. So, [tex]2^3[/tex] is equal to 8.

So, the values of [tex]16^2[/tex] and [tex]12^2[/tex] are:

[tex]16^2[/tex] = 16 x 16 = 256

[tex]12^2[/tex] = 12 x 12 = 144

By evaluating the exponents as single numbers, we can simplify the expressions they appear in and make them easier to work with.

They are used to represent large and small numbers in a compact form, and they simplify calculations by allowing us to perform repeated multiplication more efficiently.

To learn more about exponent please click on below link        

https://brainly.com/question/219134

#SPJ1

we must have made an incorrect assumption along the way. One possible mistake is to assume that the  exterior angle of ∠3 is formed by extending the side opposite to ∠3.

What is Triangle ?

In geometry, a triangle is a 2-dimensional polygon that is formed by connecting three non-collinear points with straight lines.

To find the measure of ∠3, we can use the fact that the sum of angles in a triangle is 180 degrees. Therefore, we can write:

∠3 + ∠4 + ∠5 = 180

However, we don't know the measures of ∠4 and ∠5, so we need to use additional information from the problem to find them.

Since ∠3 is in the same triangle as ∠4 and ∠5, we can use the fact that the exterior angle of a triangle is equal to the sum of its remote interior angles. In other words:

∠4 + ∠5 = exterior angle of ∠3

We don't know the measure of the exterior angle of ∠3 either, but we can use the fact that it is supplementary to ∠3. Therefore:

exterior angle of ∠3 + ∠3 = 180

Combining these equations, we can solve for ∠3:

exterior angle of ∠3 + ∠3 = 180

∠4 + ∠5 = exterior angle of ∠3

∠3 + ∠4 + ∠5 = 180

Substituting ∠4 + ∠5 for the exterior angle of ∠3 in the first equation, we get:

∠3 + (∠4 + ∠5) = 180

∠3 + (exterior angle of ∠3) = 180

Simplifying, we get:

∠3 + (∠4 + ∠5) = 180

2∠3 + (∠4 + ∠5) = 180

2∠3 + exterior angle of ∠3 = 180

Now, we need to know the value of the exterior angle of ∠3. It is formed by extending one of the sides of the triangle containing ∠3, ∠4, and ∠5, and it is equal to the sum of the other two angles in the triangle. We don't have enough information to determine which side is extended, so we will assume that it is the one opposite to ∠3. In this case, we have:

exterior angle of ∠3 = ∠4 + ∠5

Substituting in the equation above, we get:

2∠3 + ∠4 + ∠5 = 180

Now, we can solve for ∠3:

2∠3 + ∠4 + ∠5 = 180

2∠3 = 180 - (∠4 + ∠5)

2∠3 = 180 - (exterior angle of ∠3)

2∠3 = 180 - (∠4 + ∠5)

2∠3 = 180 - (∠3 + ∠4 + ∠5)

2∠3 = 180 - 180

2∠3 = 0

∠3 = 0

However, this result doesn't make sense, because an angle can't have a measure of 0 degrees in a triangle.

Therefore, we must have made an incorrect assumption along the way. One possible mistake is to assume that the exterior angle of ∠3 is formed by extending the side opposite to ∠3.

To learn more about Triangle from given link.

https://brainly.com/question/30599944

#SPJ1

The length of the ramp (y) is C. 36.9 feet

We can use trigonometry to find out the answer. Here we have given the opposite side length and the angle of elevation. Hence we can use the trigonometric ratio of tangent.

Let's see the steps for solving the problem.

Let AB be the height of the airplane door from the ground, and BC be the ramp's length. Also, let angle BAC be the angle of elevation of the ramp from the ground.

So,angle BAC = 31°andAB = 19 feet.

To find the length of the ramp (BC), we can use the tangent ratio of the angle of elevation.

tan θ = perpendicular/base

Here, the perpendicular is AB and the base is BC.tan 31° = AB/BC

Now, substitute the given values in the equation.

tan 31° = 19/BC

1/√3 = 19/BC

√3 = 19/BC

BC = 19/√3 feet [dividing both sides by √3]

We need to simplify the above answer.

We can multiply and divide the numerator by √3.BC = 19/√3 * √3/√3BC = 19√3/3

Therefore, the length of the ramp is BC = 19√3/3 feet.

Hence, the correct option is (C) 36.9 feet.

The question was incomplete, Find the full content below:

An airplane door is 19 feet off the ground and the ramp has a 31 angle of elevation. What is the length of the ramp (y)?

A. 31.6 feet

B. 22.2 feet

C. 36.9 feet

D. 9.8 feet

Know more about Trigonometry here:

https://brainly.com/question/25618616

#SPJ11

Answer:1.98

Step-by-step explanation: I know

Answer:

1 ft squared

Step-by-step explanation:

area = base x height / 2

2/3 x 3  = 2/2=1

The maximum volume that a cylinder with a surface area of 90 can have is approximately 27.05 cubic units

To solve this problem, we need to use the formulas for the surface area and volume of a cylinder

Surface area = 2πr^2 + 2πrh

Volume = πr^2h

where r is the radius of the base of the cylinder, h is the height of the cylinder, and π is approximately equal to 3.14159.

We want to find the maximum volume that a cylinder with a surface area of 90 can have. Let's first solve the surface area formula for h

90 = 2πr^2 + 2πrh

45 = πr^2 + πrh

45/π = r^2 + rh/π

Next, we can solve the volume formula for h

V = πr^2h

h = V/(πr^2)

Now we substitute this expression for h into the surface area formula

45/π = r^2 + r(V/(πr^2))

45/π = r^2 + V/r

To find the maximum volume, we need to find the value of V that maximizes this expression. We can do this by taking the derivative with respect to r and setting it equal to zero

d/dx (r^2 + V/r) = 2r - V/r^2 = 0

2r = V/r^2

r^3 = V/2

Now we can substitute this expression for V into the surface area formula to find the corresponding value of r

45/π = r^2 + r(V/(πr^2))

45/π = r^2 + r/2r^2

45/π = r^2 + 1/(2r)

45/π - 1/(2r) = r^2

r^2 = (45/π - 1/(2r))

r^4 = 45r/(π) - 1/4

We can solve this quartic equation for r using numerical methods, such as the Newton-Raphson method. Alternatively, we can use trial and error to approximate the value of r that satisfies this equation

V ≈ 27.05 cubic units

Learn more about volume here

brainly.com/question/1037971

#SPJ4

Demarcus would need to recruit a total of 300 people for his study.

To determine this, you can follow these steps:

1. Identify the number of conditions in the factorial design. In this case, it is a 3 x 2 design, which means there are 6

conditions (3 levels of one factor multiplied by 2 levels of the other factor).

2. Determine the number of participants needed for each condition. Demarcus needs 50 people in each condition.

3. Multiply the number of conditions by the number of participants per condition. In this case, 6 conditions x 50

participants per condition = 300 total participants.

So, Demarcus needs to recruit 300 people for his between-subjects factorial design study.

for such more question on total

https://brainly.com/question/25109150

#SPJ11

Answer:

Step-by-step explanation:

x = pounds of gralic powder

x + 7 = pounds of medieval smelling salt

(.38)(x) + (7)(.44) = (x + 7)(.40)

.38x + 3.08 = .40x + 2.80

.38x - .38x + 3.08 = .40x - .38x + 2.80

3.08 = .02x + 2.80

3.08 - 2.80 = .02x + 2.80 -2.80

.28 = .02x

.28/.02 = .02x/.02

14 = x

use 14 pounds of garlis powder

The area of wrapping paper required by Gabriella to wrap a gift box in the shape of rectangular prism is 718 ft².

What is area?

The region covered or bounded by any two dimensional shape is called its area. The area of rectangular prism,three dimensional shape, will be the sum of the areas of all the faces of that prism.

Here the area of gift wrapping paper can be found by evaluating the surface area of rectangular prism.

Area of wrapping paper= Area of all six faces of rectangular prism

                                      =Area of Surface₁ +Surface₂+Surface₃+ Surface₄ + Surface₅ + Surface₆

Dimensions of Surface₁: Length=13 ft , Width= 11 ft

Area of Surface₁= Length x Width

                          = 13 x 11

                          = 143 sq. ft

Dimensions of Surface₂: Length=13 ft , Width= 9 ft

Area of Surface₂= Length x Width

                          = 13 x 9

                          = 117 sq. ft

Dimensions of Surface₃: Length=13 ft , Width= 11 ft

Area of Surface₃= Length x Width

                          = 13 x 11

                          = 143 sq. ft

Dimensions of Surface₄: Length=13 ft , Width= 9 ft

Area of Surface₄= Length x Width

                          = 13 x 9

                          = 117 sq. ft

Dimensions of Surface₅: Length=11 ft , Width= 9 ft

Area of Surface₅= Length x Width

                          = 11 x 9

                          = 99 sq. ft

Dimensions of Surface₆: Length=11 ft , Width= 9 ft

Area of Surface₆=  Area of Surface₅= 99 sq. ft

Total Area of paper=Sum of all areas of six faces

                               =143+117+143+117+99+99

                               =718 sq. ft

718 ft² wrapping paper is required to wrap the gift.

To know more about area, visit:

https://brainly.com/question/28020161

#SPJ1

Refer to the attachment below indicating the numbered faces.

To identify an outlier in a set of numbers, we first need to determine the central tendency of the data, such as the mean or median. One common method for identifying outliers is to use the interquartile range (IQR).

To do this, we first need to find the median of the data set:

45, 52, 17, 63, 57, 42, 54, 58

Arranging them in ascending order:

17, 42, 45, 52, 54, 57, 58, 63

The median is the middle value, which is 54.

Next, we need to find the IQR. The IQR is the range between the first and third quartiles of the data. The first quartile (Q1) is the median of the lower half of the data, and the third quartile (Q3) is the median of the upper half of the data.

To find Q1 and Q3, we split the data into two halves:

Lower half: 17, 42, 45, 52

Upper half: 54, 57, 58, 63

Q1 is the median of the lower half, which is (42 + 45)/2 = 43.5.

Q3 is the median of the upper half, which is (57 + 58)/2 = 57.5.

Therefore, the IQR is 57.5 - 43.5 = 14.

Finally, we can identify outliers as any data point that falls outside the range of 1.5 times the IQR above Q3 or below Q1.

The upper limit is Q3 + 1.5(IQR) = 57.5 + 1.5(14) = 78.5.

The lower limit is Q1 - 1.5(IQR) = 43.5 - 1.5(14) = 22.5.

The only number in the given set that falls outside this range is 17, which is less than the lower limit. Therefore, 17 is the outlier in this data set.

Answer:

17

Step-by-step explanation:

In the set of numbers: 45, 52, 17, 63, 57, 42, 54, 58, the outlier is the number 17.

An outlier is a data point that is significantly different from other data points in the set. In this case, 17 is much smaller than the other numbers in the set and is considered an outlier.

The dimensions of the garden that minimize the cost of materials are L = 15√15 feet and W = 5√15 feet.

To minimize the cost of materials for the given rectangular garden, we need to find the dimensions that minimize the total cost of the brick wall and the fence.

Let's assume the length of the garden is L and the width is W. Then, the area of the garden is given by LW = 75. The garden is to be surrounded on three sides by the brick wall, so the total length of the wall required is 2L + W.

The cost of the brick wall is $10 per foot, so the cost of the wall is 10(2L + W). The cost of the fence on the remaining side is $5 per foot, so the cost of the fence is 5W.

Hence, the total cost of materials C is given by:

C = 10(2L + W) + 5W

Simplifying this equation, we get:

C = 20L + 15W

Using the area formula LW = 75, we can solve for one of the variables in terms of the other. For example, we can solve for W as follows:

W = 75/L

Substituting this into the equation for C, we get:

C = 20L + 15(75/L)

To minimize C, we can take the derivative of C with respect to L, set it equal to zero, and solve for L:

dC/dL = 20 - 1125/L^2 = 0

Solving for L, we get:

L = 15√15

Substituting this value of L back into the equation for W, we get:

W = 5√15

To learn more about dimensions click on,

https://brainly.com/question/15221886

#SPJ4

Answer: No it would not be enough , he will need 100 cm more of paper.

Step-by-step explanation:

First ,

The area of paper is

= 96 × 50

= 4800

How much more paper he needs = 4900 - 4800

                                                         = 100 cm

I hope this helps

Answer:

Step-by-step explanation:

Let's first find the total volume of clay used for the cone and the sphere:

For the cone, we need the formula for the volume of a cone: Vcone = (1/3)πr^2h, where r is the radius of the base and h is the height.

Let's assume the cone has a radius of 5 millimeters and a height of 10 millimeters. Then, the volume of the cone is:

Vcone = (1/3)π(5^2)(10) = (1/3)π(250) = 83.33 cubic millimeters (rounded to two decimal places)

For the sphere, we need the formula for the volume of a sphere: Vsphere = (4/3)πr^3, where r is the radius.

Let's assume the sphere has a radius of 4 millimeters. Then, the volume of the sphere is:

Vsphere = (4/3)π(4^3) = (4/3)π(64) = 268.08 cubic millimeters (rounded to two decimal places)

The total volume of clay used for the cone and the sphere is:

Vcone + Vsphere = 83.33 + 268.08 = 351.41 cubic millimeters (rounded to two decimal places)

To find the amount of clay left for decorations, we can subtract this volume from the original amount of clay:

2000 - 351.41 = 1648.59 cubic millimeters (rounded to two decimal places)

Therefore, Walter has 1648.59 cubic millimeters of clay left for decorations.

Answer:

Let x be the amount of Australian dollars the bank buys and sells.

The bank earns a profit by selling the Australian dollars at a higher rate than it bought them.

Profit = Selling rate - Buying rate

Profit per unit = Selling rate - Buying rate = Rs.132.85 - Rs.132 = Rs.0.85

To earn a profit of Rs. 7000, the bank must sell x Australian dollars at a profit of Rs.0.85 per unit, so:

Profit = x * 0.85

x = Profit / 0.85

x = 7000 / 0.85

x = 8235.29

Therefore, the bank should buy and sell 8235.29 Australian dollars to earn a profit of Rs.7000.

a) Histogram for first , second and third data set is present in first, second and third above figure and it shows data is

left-skewed, symmetric and right-skewed.

b) Sample means for first, second and third data set are 14.96667, 20.83, 41.3 respectively. Sample medians for first, second and third data set are 15.5, 21, 39.5 respectively. Yes, they support our findings about skewness and symmetry.

We have three data sets of probability and statistics for computer scientists are present below, (1) 19, 24, 12, 19, 18, 24, 8, 5, 9, 20, 13, 11, 1, 12, 11, 10, 22, 21, 7, 16, 15, 15, 26, 16, 1, 13, 21, 21, 20, 19

(2) 17, 24, 21, 22, 26, 22, 19, 21, 23, 11, 19, 14, 23, 25, 26, 15, 17, 26, 21, 18, 19, 21, 24,

18, 16, 20, 21, 20, 23, 33

(3) 56, 52, 13, 34, 33, 18, 44, 41, 48, 75, 24, 19, 35, 27, 46, 62, 71, 24, 66, 94, 40, 18, 15, 39, 53, 23, 41, 78, 15, 35

a) Histogram is defined as a bar graph like representation of data that buckets a range of classes into columns along the horizontal x-axis.

From the above histogram, the data looks left-skewed.

From the above histogram, data looks like almost symmetric.

From the above histogram, the data looks right-skewed.

b) Sample mean and median :

As we see here data values are larges in count. So, for making the process easy we can use Excel command.

= mean(x₁ column) , output 14.96667

= median(x₁column) = 15.5

Now, Mean < Median => Data is left - skewed. Similarly, mean(x₂ column ) = 20.83333 and median(x₂ column) = 21

Mean = 20.83

Median = 21

Mean ≈ Median => Data is symmetric. input : = mean(x₃) ; output : 41.3

input : = median(x₃) ; output: 39.5

Mean = 41.3

Median = 39.5

Mean > Median => Data is right - skewed.

Based on the above calculations, we conclude that scenario 1 ( that is histogram method) has lesser cost and is preferable.

For more information about Histogram, refer :

https://brainly.com/question/28883575

#SPJ4

Answer:

1/4

Step-by-step explanation:

Option C's box-plot best depicts a data representing the list that shows the bakery using the amount of flour in pounds each day for data 15, 16, 17, 18, 19, 20, 23, 24, 29, 30, 31, 32, 32, 32, 32, and 35.

What exactly is a box plot?

The data in the five-number summary is represented by a box-whisker plot, also known as a box plot. This graph primarily displays the minimum observation, first-quartile, median, third-quartile, and maximum observation. A box is used to depict the first to third quartiles in a box plot. At the median, a vertical line segment goes through the box. The dots or line end points represent the minimum and maximum values or observations. The whisker represents the median of the data.

The following information is provided: 15,16,17,18,19,20,23,24,29,30,31,32,32,32,32,32,32,32,32,32,32,32,32,32,32,32,32,32,32

          1)Observation minimum=15

2)The maximum number of observations is 35.

3)The data's median:

Because the number of observations is even, the median will be the average.N=total number of observations

The median is the average or mean of the eighth and ninth observations.

          = average of 24 and 29

         =

         =26.5

Median=26.5

4)First Quartile (Q1): the mean of the observations prior to the median.

                            =average of the first to seventh observations

                            = average of 15, 16, 17, 18, 19, 20, and 23

                            =

                            =18.28

5)Third quartile (Q3): Observational mean after median

                               =mean of the tenth to sixteenth observations

                              =average of 30, 31, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32

                              =

                              =32

Q3-Q1 interquartile range (IQR)

                                      =32-18.28

                                      =13.72

Option-C contains a box plot that matches all of the values.

To know more about box plot visit:

https://brainly.com/question/14277132

#SPJ1        

The negative sign indicates that the boat traveled in the opposite direction of its intended destination, and it traveled a distance of 2.55 miles.

The speed of the motorboat is given as -3.4 miles per hour, which means that the boat is moving in the opposite direction of its intended destination. If we assume that the boat is moving at a constant speed of -3.4 miles per hour for 0.75 hours, we can use the formula:

distance = speed x time

where distance is the distance traveled, speed is the speed of the boat, and time is the time for which the boat travels at that speed.

Plugging in the given values, we get:

distance = -3.4 miles/hour x 0.75 hour

distance = -2.55 miles

The negative sign indicates that the boat traveled in the opposite direction of its intended destination, and it traveled a distance of 2.55 miles.

To learn more about distance:

brainly.com/question/15172156

#SPJ4

a motorboat travels -3.4 miles per hour for o.75 hours how far did it go?

The solution to the inequality 6x - 11 > 67 is x > 13.

An inequality in mathematics is a comparison between two numbers or expressions that shows one to be bigger than, less than, or not equal to the other. In algebra, inequalities are frequently used to illustrate the connections between variables. Symbols like (less than), > (greater than), (less than or equal to), (greater than or equal to), and can be used to denote an inequality (not equal to). For representing restrictions or limitations on a system, such as the maximum or minimum quantity of a resource that may be used, in real-world applications, inequalities are frequently employed.

The given inequality is:

6x−11>67

Adding 11 to both sides, we get:

6x > 78

Dividing both sides by 6, we get:

x > 13

Hence, the solution to the inequality 6x - 11 > 67 is x > 13.

Learn more about inequality here:

https://brainly.com/question/30228778

#SPJ1

The answer is s=√225 in. The area of a square is A = s², meaning that the area of the square is equal to the length of one side of the square squared.

A four-sided polygon with all sides equal in length. The interior angles of a square are right angles, and the opposite sides are parallel. The four sides of a square meet at its four vertices.

In this case, s is the side length.

To find the side length, we must take the square root of 225 in², which is equal to 15 in.

Therefore, the side length of the square is s=√225 in.

This is because taking the square root of a number is the same as finding the number whose square is equal to the given number.

In this case, the number whose square is equal to 225 in² is 15 in.

Hence, the side length of the square is s=√225 in.

For more questions related to polygon

https://brainly.com/question/26583264

#SPJ1

Answer:

It's probably C.

Step-by-step explanation:

41 is in the middle.

So technically speaking... It's the median?
It's definitely not A, that's for sure.

Edit: I was extremely wrong.

Answer:

the probability of drawing two 2 purple jelly without replacement is 1/10

The vertex form of the given function reveals that a = 1, h = -1, and k = 2 are true. Hence, the vertex's coordinates are (-1, 2).

A function is a mathematical rule that gives each input value a distinct output value. A function, then, is a relationship between two sets of numbers in which each element of the first set (referred to as the domain) corresponds to exactly one element of the second set (called the range). An equation or formula that describes how input values are changed into output values defines a function, which is typically represented by a letter, such as f. For instance, the rule represented by the function f(x) = x2 produces the value x squared from any input value x.

given

We must finish the square and rewrite the function in vertex form in order to determine the vertex's coordinates for the provided function, y = x2 + 2x + 3.

y = x² + 2x + 3

y = (x + 1)² - 1 + 3 (completing the square)

y = (x + 1)² + 2 (simplifying) (simplifying)

A quadratic function's vertex form is denoted by y = a(x - h)2 + k, where (h,k) denotes the vertex's coordinates.

The vertex form of the given function reveals that a = 1, h = -1, and k = 2 are true. Hence, the vertex's coordinates are (-1, 2).

To know more about function visit:

https://brainly.com/question/28193995

#SPJ1

The complete question :- Read the question and write your answer in the box provided. Your answer will be saved

Consider the function:

y = x² + 2X +3

What are the coordinates of the vertex of the given function?

Therefore, the factored form of the right side of the formula is 2πr(r + h).

A cylinder is a three-dimensional geometric shape that consists of a circular base and a curved surface that connects the base's circumference to a parallel circle at the other end of the shape. It is a type of prism with circular bases. The two circular bases of the cylinder are parallel and congruent, meaning that they have the same size and shape. The curved surface of the cylinder is composed of all the points that are equidistant from both bases. The cylinder is a common shape in real-life objects, such as cans, pipes, and drinking glasses. Its volume and surface area formulas are frequently used in geometry and applied mathematics.

Here,

Starting with the given formula:

A = 2πr² + 2πrh

We can factor out a common factor of 2πr:

A = 2πr(r + h)

To know more about cylinder,

https://brainly.com/question/30390407

#SPJ1

Answer:

20.50

Step-by-step explanation:

2.5/100 * 820.00

= 20.50