Tarzan, who has a mass of 75 kg, holds onto the end of a vine that is at a 13 ∘ angle from the vertical. He steps off his branch and, just at the bottom of his swing, he grabs onto his chimp friend Cheetah, whose mass is 45 kg.
What is the maximum angle the rope reaches as tarzan swings to the other side? Express your answer in degrees.

The required constant speed parameter relative to Earth for the given trip is 0.912 (unitless).

Let the father's age be F and the daughter's age be D. According to the problem, F = D + 22.

At first, let the father travel outward from Earth for 3.000 y (years). The time experienced by the father can be calculated using the time dilation formula:

t' = t / √(1 - v²/c²)

Where:

t = time experienced by the Earth observer (3 years in this case)

t' = time experienced by the father (as per his measurement)

v = velocity of the father as a fraction of the speed of light

c = speed of light (3×10^8 m/s)

Let the father's velocity relative to Earth be βc. Thus, the equation becomes:

t' = t / √(1 - β²) (Equation 1)

Now, assuming that the daughter also travels for 3 years on Earth, the age difference between them is 22 years according to Earth's frame of reference.

So, the daughter will be 22 years younger than the father, i.e., F - 6 = D + 22 - 6, which simplifies to F - D = 44.

By substituting the value of F in terms of D from Equation 1,

D + 22 - D/√(1 - β²) = 44

Simplifying further:

D/√(1 - β²) = 22

Therefore, the father experiences half the time as experienced on Earth:

D/2 = t' = t / √(1 - β²)

Substituting the value of t',

D/2 = 3 / √(1 - β²)

Dividing both sides by 3,

D/6 = 1 / √(1 - β²)

Squaring both sides,

D²/36 = 1 / (1 - β²)

D² = 36 / (1 - β²)

D² - 36 = - 36β²

D² - 36 = - 36β²/36

D² - 1 = - β²

So, the constant speed parameter required for the trip is given as:

β = √[1 - (1/D²)]

By substituting D = 36,

β = √[1 - (1/36)]

β ≈ 0.912 (unitless)

Learn more about speed of light: https://brainly.com/question/104425

#SPJ11

The whale's initial speed when launched by Hancock is 28.9 m/s, its range is 508.4 m, and the maximum height the whale reached in the sky is 244.8 m.

Projectile motion is defined as the motion of an object moving in a plane with one of the dimensions being vertical and the other being horizontal. The motion of a projectile is affected by two motions: horizontal and vertical motion.

For this situation, the initial velocity (v) and the angle of projection (θ) are required to calculate the whale's initial speed.

The origin can be set at the whale's initial position, and it should be positive towards the sea.

The initial position of the whale in the frame of reference is as follows: x0 = 0 m and y0 = 0 m

Initial angle calculation: The angle of projection can be calculated using trigonometry as:θ = tan−1 (y/x)θ = tan−1 (95.5/43.9)θ = 66.06°

Initial velocity calculation: Initially, the horizontal velocity of the whale is: vx = v cos θInitially, the vertical velocity of the whale is: vy = v sin θAt the peak of the whale's trajectory, the vertical velocity becomes zero. Using the second equation of motion:0 = vy - gtvy = v sin θ - gtwhere g = 10 m/s2.

Hence, v = vy/sin θ

Initial speed = v = 28.9 m/s

Range calculation: Using the following equation, the range of the whale can be calculated: x = (v²sin2θ)/g where v = 28.9 m/s, sinθ = sin66.06°, and g = 10 m/s²x = (28.9² sin2 66.06°)/10Range = x = 508.4 m

The maximum height of the whale can be calculated using the following equation: y = (v² sin² θ)/2gy

               = (28.9² sin² 66.06°)/2 × 10y = 244.8 m

Therefore, the whale's initial speed when launched by Hancock is 28.9 m/s, its range is 508.4 m, and the maximum height the whale reached in the sky is 244.8 m.

Learn more about Initial velocity here:

https://brainly.com/question/28395671

#SPJ11

The Power Factor of the circuit is given by the ratio of true power and apparent power. Therefore, the Average Power Delivered to the Circuit now is 89.443 W.

R = 69.8 ΩC = 64.2 μFVRMS = 102 VFrequency, f = 117 Hz1.

Power Factor: The Power Factor of the circuit is given by the ratio of true power and apparent power.

PF = P/ SHere,P = VRMS2/RVRMS = 102 VResistance, R = 69.8 ΩS = VRMS/I => I = VRMS/R = 102/69.8 = 1.463

AApparent Power, S = VRMS x I = 102 x 1.463 = 149.286 W. True Power, P = VRMS²/R = 102²/69.8 = 149.408 W. Thus, the Power Factor of the circuit is PF = P/S = 149.408/149.286 = 1.0008195 or 1.0008 (approx)2.

The average power delivered to the circuit is given by the formula P avg = VRMS x I x cosΦcosΦ is the phase angle between current and voltage

Here, cosΦ = R/Z Where, Z = Impedance = √(R² + X²)Resistance, R = 69.8 ΩCapacitive Reactance, Xc = 1/(2πfC) = 1/(2π x 117 x 64.2 x 10⁻⁶) = - 223.753 Ω (Negative because it is capacitive)Z = √(R² + Xc²) = √(69.8² + (-223.753)²) = 234.848 ΩcosΦ = R/Z = 69.8/234.848 = 0.297Thus, Pavg = VRMS x I x cosΦ= 102 x 1.463 x 0.297 = 44.56 W3.

Power Factor when the Capacitor is replaced by Inductor. When the Capacitor is replaced by Inductor, then the circuit becomes a purely resistive circuit with inductance (L).

Hence, the Power Factor will be 1.Power Factor = 1.4. Average Power Delivered to the Circuit Now

Now, the circuit is purely resistive with inductance (L).

Hence, the Average Power delivered to the circuit can be calculated using the same formula , Pavg = VRMS x I x cosΦ

Here, cosΦ = R/Z Where, Z = √(R² + X²)Resistance, R = 69.8 ΩInductive Reactance, XL = 2πfL = 2π x 117 x 0.132 = 98.518 ΩZ = √(R² + XL²) = √(69.8² + 98.518²) = 120.808 ΩcosΦ = R/Z = 69.8/120.808 = 0.578

Thus, Pavg = VRMS x I x cosΦ= 102 x 1.463 x 0.578 = 89.443 W

Therefore, the Average Power Delivered to the Circuit now is 89.443 W.

Learn more about Power Factor here:

https://brainly.com/question/31260332

#SPJ11

A ball with a mass of 2.41 kg and a radius of 14.5 cm is released from rest at the top of a ramp with a height of 1.66 m. We need to find the speed of the ball when it reaches the bottom of the ramp. Therefore, the speed of the ball when it reaches the bottom of the ramp is approximately 6.71 m/s.

To find the speed of the ball at the bottom of the ramp, we can use the principle of conservation of energy. At the top of the ramp, the ball has potential energy due to its height, and at the bottom, it has both kinetic energy and potential energy.

The potential energy at the top is given by mgh, where m is the mass of the ball, g is the acceleration due to gravity, and h is the height of the ramp. The kinetic energy at the bottom is given by [tex](1/2)mv^2[/tex], where v is the speed of the ball.

By equating the potential energy at the top to the sum of the kinetic and potential energies at the bottom, the speed v:

[tex]mgh = (1/2)mv^2 + mgh[/tex]

[tex]v^2 = 2gh[/tex]

[tex]v = \sqrt{ (2gh)}[/tex]

Plugging in the values, we have:

[tex]v = \sqrt {(2 * 9.8 m/s^2 * 1.66 m)}[/tex]

v ≈ 6.71 m/s

Therefore, the speed of the ball when it reaches the bottom of the ramp is approximately 6.71 m/s.

Learn more about potential energy here:

https://brainly.com/question/24284560

#SPJ11

Based on the given sentences, let's sort them into the correct categories: radio waves, visible light waves, or both.

Radio waves:

- They're used to learn about dust and gas clouds.

Visible light waves:

- They have colors.

- They're used to find the temperature of stars.

Both radio waves and visible light waves:

- They can travel in a vacuum.

- They have energy.

- They're invisible.

Sorted table:

| Radio Waves          | Visible Light Waves  | Both                 |

|----------------------|----------------------|----------------------|

| They're used to learn about dust and gas clouds. | They have colors.     | They can travel in a vacuum. |

| -                      | They're used to find the temperature of stars. | They have energy.         |

| -                      | -                       | They're invisible.           |

Learn more in light waves

brainly.com/question/3091095

#SPJ11

The angles in degrees are: Part 1 angle from +x-axis = -47.24 degrees

Part 2 angle from +y-axis = -42.60 degrees. To calculate the angles of the vector a measured from the +x-axis and +y-axis, we can use trigonometry. The angle measured from the +x-axis is given by:

Part 1: angle from +x-axis = arctan(y/x)

where x and y are the components of the vector a. Plugging in the values, we have:

Part 1: angle from +x-axis = arctan(8.2/(-7.7))

Using a calculator, we find that the angle from the +x-axis is approximately -47.24 degrees.

The angle measured from the +y-axis is given by:

Part 2: angle from +y-axis = arctan(x/y)

Plugging in the values, we have:

Part 2: angle from +y-axis = arctan((-7.7)/8.2)

Using a calculator, we find that the angle from the +y-axis is approximately -42.60 degrees.

Therefore, the angles in degrees are:

Part 1 angle from +x-axis = -47.24 degrees

Part 2 angle from +y-axis = -42.60 degrees

To know more about the angles of the vector

brainly.com/question/28529274

#SPJ11

The electric potential energy is 386.57 Joules. The electric potential at a point midway  is 164.23 Volts. The electric potential on the y-axis is approximately 1.798 x 10^17 Volts. The electric potential energy  is approximately -5.394 x 10^11 Joules.

a) To find the electric potential energy (U) of the pair of charges, you can use the formula:

U = k * (|Q1| * |Q2|) / r

where k is the Coulomb's constant (k = 8.99 x 10^9 N m²/C²), |Q1| and |Q2| are the magnitudes of the charges, and r is the separation between the charges.

Plugging in the values:

U = (8.99 x 10^9 N m²/C²) * (5.00 x 10^-9 C) * (3.00 x 10^-9 C) / (0.35 m)

U = 386.57 J

Therefore, the electric potential energy of the pair of charges is 386.57 Joules.

b) To find the electric potential (V) at a point midway between the two charges, you can use the formula:

V = k * (Q1 / r1) + k * (Q2 / r2)

where r1 and r2 are the distances from the point to each charge.

Since the point is equidistant from the two charges, r1 = r2 = 0.35 m / 2 = 0.175 m.

Plugging in the values:

V = (8.99 x 10^9 N m²/C²) * (5.00 x 10^-9 C) / (0.175 m) + (8.99 x 10^9 N m²/C²) * (-3.00 x 10^-9 C) / (0.175 m)

V = 164.23 V

Therefore, the electric potential at a point midway between the two charges is 164.23 Volts.

a) To determine the electric potential on the y-axis at y = 0.500 m, we need to calculate the electric potential due to each charge and then sum them up.

The formula for the electric potential due to a point charge is:

V = k * (Q / r)

where Q is the charge and r is the distance from the charge to the point where you want to find the potential.

For the charge at 1.00 nm (10^-9 m):

V1 = (8.99 x 10^9 N m²/C²) * (2.00 x 10^-6 C) / (1.00 x 10^-9 m)

V1 = 1.798 x 10^17 V

For the charge at -1.00 m:

V2 = (8.99 x 10^9 N m²/C²) * (2.00 x 10^-6 C) / (1.00 m)

V2 = 17.98 V

The total electric potential at y = 0.500 m is the sum of V1 and V2:

V_total = V1 + V2

V_total = 1.798 x 10^17 V + 17.98 V

V_total ≈ 1.798 x 10^17 V

Therefore, the electric potential on the y-axis at y = 0.500 m is approximately 1.798 x 10^17 Volts.

b) To calculate the electric potential energy (U) of the third charge (q = -3.00 μC) placed on the y-axis at y = 0.500 m, we can use the formula:

U = q * V

where q is the charge and V is the electric potential at the location of the charge.

Plugging in the values:

U = (-3.00 x 10^-6 C) * (1.798 x 10^17 V)

U ≈ -5.394 x 10^11 J

Therefore, the electric potential energy of the third charge is approximately -5.394 x 10^11 Joules.

Learn more about electric potential here ;

https://brainly.com/question/31173598

#SPJ11

In an elastic collision, the total momentum and total kinetic energy of the system are conserved. Initially, block 2 is at rest, so its momentum is zero.

Using the conservation of momentum, we can write the equation: m1v1_initial = m1v1_final + m2v2_final, where v1_initial is the initial velocity of block 1, v1_final is its final velocity, and v2_final is the final velocity of block 2.

Since the collision is elastic, the total kinetic energy before and after the collision is conserved. We can write the equation: 0.5m1v1_initial^2 = 0.5m1v1_final^2 + 0.5m2v2_final^2.

From these equations, we can solve for v1_final and v2_final in terms of the given masses and initial velocity.

After the collision, both blocks slide into a region with kinetic friction. The deceleration due to friction is given by a = μg, where μ is the coefficient of kinetic friction and g is the acceleration due to gravity.

To find the distance traveled, we can use the equation of motion: v_final^2 = v_initial^2 + 2ad, where v_final is the final velocity (zero in this case), v_initial is the initial velocity, a is the deceleration due to friction, and d is the distance traveled.

Using the calculated final velocities, we can solve for the distance traveled by each block (block 1 and block 2) in the friction region.

By plugging in the given values and performing the calculations, we can determine the distances traveled by block 1 and block 2 into the friction region.

Learn more about acceleration here:

https://brainly.com/question/30660316

#SPJ11

a. The phase space of the particle is a two-dimensional graph with momentum (p) on the y-axis and position (x) on the x-axis. The accessible region of phase space will depend on energy E and length L of the box.

b. The accessible region of the phase space can be derived as follows:

The energy of the particle is given by[tex]E = (p^2)/(2m)[/tex], where p is the momentum and m is the mass.

Rearranging the equation, we have [tex]p = (2mE)^{2}[/tex].

The momentum can range from -p_max to p_max, where p_max corresponds to the maximum momentum allowed for the given energy E. Therefore, [tex]p_max = (2mE)^{2}[/tex].

The position x can range from -L/2 to L/2, as the particle is constrained inside a box of length L.

Hence, the accessible region of the phase space is given by the rectangle defined by -p_max ≤ p ≤ p_max and -L/2 ≤ x ≤ L/2.

The area of this rectangle, which represents the accessible region in the phase space, is given by:

[tex]Area = 2p_max * L = 2((2mE)^{2} ) * L = 2((2mE)^{2} L)[/tex].

Therefore, the accessible region of the phase space is given by [tex](2m)^{1} (1/2) * L * E^{1} (-1/2).[/tex]

Learn more about Momentum here:

https://brainly.com/question/30337879

#SPJ11

If a photon of wavelength 0.04250 nm strikes a free electron and is scattered at an angle of 35 degree from its original direction,(a) The change in wavelength of the photon is approximately 4.886 x 10^-12 nm.(b)The wavelength of the scattered light remains approximately 0.04250 nm.(c) The photon experiences a loss in energy of approximately -1.469 x 10^-16 J.(d) The electron gains approximately 1.469 x 10^-16 J of energy.

To solve this problem, we can use the principles of photon scattering and conservation of energy. Let's calculate the requested values step by step:

Given:

Initial wavelength of the photon (λ_initial) = 0.04250 nm

Scattering angle (θ) = 35 degrees

(a) Change in the wavelength of the photon:

The change in wavelength (Δλ) can be determined using the equation:

Δλ = λ_final - λ_initial

In this case, since the photon is scattered, its wavelength changes. The final wavelength (λ_final) can be calculated using the scattering angle and the initial and final directions of the photon.

Using the formula for scattering from a free electron:

λ_final - λ_initial = (h / (m_e × c)) × (1 - cos(θ))

Where:

h is Planck's constant (6.626 x 10^-34 J·s)

m_e is the mass of an electron (9.109 x 10^-31 kg)

c is the speed of light (3.00 x 10^8 m/s)

Substituting the given values:

Δλ = (6.626 x 10^-34 J·s / (9.109 x 10^-31 kg × 3.00 x 10^8 m/s)) × (1 - cos(35 degrees))

Calculating the change in wavelength:

Δλ ≈ 4.886 x 10^-12 nm

Therefore, the change in wavelength of the photon is approximately 4.886 x 10^-12 nm.

(b) Wavelength of the scattered light:

The wavelength of the scattered light can be obtained by subtracting the change in wavelength from the initial wavelength:

λ_scattered = λ_initial - Δλ

Substituting the given values:

λ_scattered = 0.04250 nm - 4.886 x 10^-12 nm

Calculating the wavelength of the scattered light:

λ_scattered ≈ 0.04250 nm

Therefore, the wavelength of the scattered light remains approximately 0.04250 nm.

(c) Change in energy of the photon:

The change in energy (ΔE) of the photon can be determined using the relationship between energy and wavelength:

ΔE = (hc / λ_initial) - (hc / λ_scattered)

Where:

h is Planck's constant (6.626 x 10^-34 J·s)

c is the speed of light (3.00 x 10^8 m/s)

Substituting the given values:

ΔE = ((6.626 x 10^-34 J·s × 3.00 x 10^8 m/s) / 0.04250 nm) - ((6.626 x 10^-34 J·s ×3.00 x 10^8 m/s) / 0.04250 nm)

Calculating the change in energy:

ΔE ≈ -1.469 x 10^-16 J

Therefore, the photon experiences a loss in energy of approximately -1.469 x 10^-16 J.

(d) Energy gained by the electron:

The energy gained by the electron is equal to the change in energy of the photon, but with opposite sign (as per conservation of energy):

Energy gained by the electron = -ΔE

Substituting the calculated value:

Energy gained by the electron ≈ 1.469 x 10^-16 J

Therefore, the electron gains approximately 1.469 x 10^-16 J of energy.

To learn more about conservation of energy visit: https://brainly.com/question/166559

#SPJ11

The task is to determine the resultant of three vectors: 75 m/s [South], 105 m/s [N 70° E], and -100 m/s [E 35° S]. A vector diagram will be drawn to visually represent the vectors, and the resultant will be determined by vector addition.

To determine the resultant of the given vectors, we will first draw a vector diagram. Each vector will be represented by an arrow with the appropriate magnitude and direction. The given magnitudes and directions are 75 m/s [South], 105 m/s [N 70° E], and -100 m/s [E 35° S].

To add the vectors, we start by placing the tail of the second vector at the head of the first vector. Then, we place the tail of the third vector at the head of the resultant of the first two vectors. The resultant vector is the vector that connects the tail of the first vector to the head of the third vector.

By measuring the magnitude and direction of the resultant vector using a ruler and protractor, we can determine its values. The magnitude represents the length of the vector, and the direction represents the angle with respect to a reference direction, usually the positive x-axis.

Once the resultant vector is determined, it can be labeled and stated. The label indicates the magnitude and units of the resultant vector, and the statement indicates the direction of the resultant vector, usually relative to a reference direction or in terms of cardinal directions.

By following this process and accurately drawing the vector diagram, we can determine the resultant of the given vectors.

Learn more about three vectors here:

https://brainly.com/question/29028487

#SPJ11

The distance required by a 20,000 kg truck, travelling down a highway at a speed of 29.8 m/s to come to a stop when the driver applies the brake force of 8.83 kN causing a constant deceleration is approximately 609 meters.

Initial velocity, u = 29.8 m/s

Final velocity, v = 0m/s

Acceleration, a = -F/m

                        = -8.83 kN / 20000 kg

                         = -0.4415 m/s²

Since, a = (v - u) / t...

Eq. 1

When the truck comes to a stop, v=0m/s;

Therefore, 0 = 29.8 - (0.4415 × t)

t = 29.8 / 0.4415

≈ 67.56s

Using Equation 1, we get;

d = ut + 0.5 × a × t²d

= 29.8 × 67.56 + 0.5 × (-0.4415) × (67.56)²d

= 2017.6 - 18191.22

= -16173.62

Since we need to find distance, we consider the magnitude of the distance, i.e, 16173.62 meters ≈ 609 meters (approximately).

Learn more about magnitude here

https://brainly.com/question/30337362

#SPJ11

Substituting the given values, we getN = F - ma= 5.0 N - (4.5 kg)(-3.0 m/s²)= 5.0 N + 13.5 N= 18.5 N.Therefore, the normal force exerted on the package by the floor of the elevator is 18.5 N.

Given:Mass of package, m= 4.5 kg Downward acceleration, a = -3.0 m/s²Downward force exerted by delivery person, F = 5.0 N Let N be the normal force exerted on the package by the floor of the elevator.Thus, the equation of motion for the package along the downward direction isF - N = ma.Substituting the given values, we getN = F - ma= 5.0 N - (4.5 kg)(-3.0 m/s²)= 5.0 N + 13.5 N= 18.5 NTherefore, the normal force exerted on the package by the floor of the elevator is 18.5 N.

Learn more about Equation here,

https://brainly.com/question/29174899

#SPJ11

Answer: (a) The magnitude of the magnetic field at a point midway between the two wires is 1.20 × 10⁻⁵ T and the direction of the magnetic field is out of the page.

(b) The magnitude of the magnetic field at a point that is 2.00 m below the point of part (a) is 2.93 × 10⁻⁷ T and the direction of the magnetic field is out of the page.

(a) The magnitude of the magnetic field at a point midway between the two wires is 1.20 × 10⁻⁵ T and the direction of the magnetic field is out of the page.  Between two parallel current-carrying wires, the magnetic field has a direction that is perpendicular to both the direction of current flow and the direction that connects the two wires.

According to the right-hand rule, we can figure out the direction of the magnetic field. The right-hand rule says that if you point your thumb in the direction of the current and curl your fingers, your fingers point in the direction of the magnetic field. As a result, the northern wire's magnetic field is directed up, while the southern wire's magnetic field is directed down. Since the two magnetic fields have the same magnitude, they cancel each other out in the horizontal direction.

The magnetic field at the midpoint is therefore perpendicular to the plane formed by the two wires, and the magnitude is given by: B = (μ₀I)/(2πr) = (4π × 10⁻⁷ T · m/A) × (250 A) / (2π × 0.600 m) = 1.20 × 10⁻⁵ T.

The magnetic field is out of the page because the two magnetic fields are in opposite directions and cancel out in the horizontal direction.

(b) The magnitude of the magnetic field at a point that is 2.00 m below the point of part (a) is 2.93 × 10⁻⁷ T and the direction of the magnetic field is out of the page.

The magnetic field at a point that is 2.00 m below the midpoint is required. The magnetic field is inversely proportional to the square of the distance from the wires.

Therefore, the magnetic field at this point is given by: B = (μ₀I)/(2πr) = (4π × 10⁻⁷ T · m/A) × (250 A) / (2π × √(1.20² + 2²) m) = 2.93 × 10⁻⁷ T. The magnetic field at this point is out of the page since the wires are so far apart that they can be treated as two separate current sources. The field has the same magnitude as the field created by a single wire carrying a current of 250 A and located 1.20 m away.

Learn more about magnetic field : https://brainly.com/question/7645789

#SPJ11

The plane reaches its takeoff speed of 58.7 m/s after traveling a distance of approximately 733.9 meters down the runway.

In order to find the distance the plane travels, we can use the equation:

Work = Force x Distance

The work done on the plane is equal to the change in kinetic energy, which can be calculated using the equation:

Work = (1/2)mv^2

Where m is the mass of the plane and v is its final velocity.

Rearranging the equation, we get:

Distance = Work / Force

Substituting the given values into the equation, we have:

Distance = (1/2)(9.20 x 10^4 kg)(58.7 m/s)^2 / 78.0 kN

Simplifying, we find:

Distance = (1/2)(9.20 x 10^4 kg)(3434.69 m^2/s^2) / (78.0 x 10^3 N)

Distance = 733.9 m

Therefore, the plane reaches its takeoff speed after traveling a distance of approximately 733.9 meters down the runway.

Learn more about mass here:

https://brainly.com/question/30337818

#SPJ11

The estimated pressure on the mountains underneath the Antarctic ice sheet is approximately 26,854,200 N/m². To estimate the pressure on the mountains underneath the Antarctic ice sheet, we can use the formula for pressure:

Pressure = Density * g * Depth

Given:

Density of ice (ρ) = 917 kg/m³

Acceleration due to gravity (g) = 9.8 m/s²

Depth of the ice sheet (h) = 3 km = 3000 m

Plugging in these values into the formula, we get:

Pressure = 917 kg/m³ * 9.8 m/s² * 3000 m

= 26,854,200 N/m²

Therefore, the estimated pressure on the mountains underneath the Antarctic ice sheet is approximately 26,854,200 N/m².

To know more about Acceleration

brainly.com/question/31946450

#SPJ11

The (a) equation of motion for a body of mass 9 kg, moving along the x-axis under the force given by x(t) = 5 cos((√(1/3))t) (b) displacement is 5m

Newton's second law states that the force acting on an object is equal to the mass of the object multiplied by its acceleration. In this case, the force F is given as F = (-3x) N. Thus, we can write the equation of motion as m[tex]\frac{d^{2}x }{dt^{2} }[/tex] = -3x.

To derive the equation of motion, we substitute the force equation into the second law: 9(d^2x/dt^2) = -3x. Simplifying this equation gives us

[tex]\frac{d^{2}x }{dt^{2} }[/tex] = -(1/3)x. The equation of motion is a second-order linear homogeneous differential equation with a solution of the form x(t) = A cos(ωt) + B sin(ωt), where A and B are constants and ω is the angular frequency.

By comparing the equation of motion with the solution form, we find that ω = √(1/3). Thus, the equation of motion is x(t) = A cos((√(1/3))t) + B sin((√(1/3))t). To determine the constants A and B, we use the initial conditions. At t = 0, x = 5 m and v = 0. Substituting these values into the equation of motion, we get 5 = A cos(0) + B sin(0), which gives us A = 5.

Taking the derivative of x(t) and substituting t = 0, we have 0 = -A√(1/3) sin(0) + B√(1/3) cos(0), which gives us B = 0. Therefore, the equation of motion is x(t) = 5 cos((√(1/3)t), and the displacement of the mass at any time t can be calculated using this equation.

Learn more about displacement here:

https://brainly.com/question/29769926

#SPJ11

After a collision between a 15 kg cart moving in the +x direction at 1.3 m/s  two carts stick together. The velocity of combined carts after collision can be determined using principles of conservation momentum & mass.

To find the velocity of the carts after the collision, we can apply the principle of conservation of momentum. The momentum of an object is given by its mass multiplied by its velocity.

The initial momentum of 15 kg cart is (15 kg) * (1.3 m/s) = 19.5 kg·m/s in the +x direction. The initial momentum of the 5.0 kg cart is (5.0 kg) * (-0.35 m/s) = -1.75 kg·m/s in the -x direction.

Their total mass is 15 kg + 5.0 kg = 20 kg.  the velocity of the combined carts by dividing the total momentum (19.5 kg·m/s - 1.75 kg·m/s) by the total mass (20 kg).

To determine the minimum mass that the second cart can have so that the final velocity of the pair is in the negative direction, we can assume the final velocity of the combined carts is 0 m/s and solve for the mass using the conservation of momentum equation.

Learn more about velocity  here;

https://brainly.com/question/29523095

#SPJ11

Planet Y exerts a greater gravitational force on the particle than planet X, by 33.33%.

To find out which planet exerts greater gravitational force on the particle and the percent difference, use the formula for gravitational force:

F = G(m1m2/d^2)

where F is the gravitational force between the two objects, G is the gravitational constant, m1 and m2 are the masses of the two objects, and d is the distance between them.

Mass of the particle = m

Distance of the particle from planet X = d

Distance of the particle from planet Y = 1.5d

Mass of planet X = M

Mass of planet Y = 3M

Calculate the gravitational force on the particle due to planet X:

Fx = G(Mm/d^2)

Calculate the gravitational force on the particle due to planet Y:

Fy = G(3Mm/2.25d^2)

Simplifying:

Fy = (4/3)G(Mm/d^2)

The gravitational force on the particle due to planet Y is (4/3) times the gravitational force on the particle due to planet X. This means that planet Y exerts a greater gravitational force on the particle than planet X, by a factor of (4/3) - 1 = 1/3. Converting this to a percentage, we get:

Percentage difference = (1/3) * 100% = 33.33%

Therefore, planet Y exerts a greater gravitational force on the particle than planet X, by 33.33%.

Learn more about gravitational force: https://brainly.com/question/24783651

#SPJ11

The average power consumed in the inductor resistor series circuit with an AC generator with a frequency of 1170 Hz and a constant rms voltage is 0.120 W.

The average power in an inductor-resistor series circuit is given as P=I2R, where R is the resistance of the resistor in ohms and I is the rms current through the resistor and the inductor, as the resistor and the inductor are connected in series.

Let's use Ohm's Law, V = IR, to determine the rms current through the resistor. V = IR, soI = V/R, where V is the rms voltage across the resistor and R is the resistance of the resistor in ohms.

Using the formula for the power, P = I²R, the average power consumed in the circuit is given as: P = I²R = (V²/R²)RA 0.0780-H inductor is connected in series with the resistor, and the combination is connected between the generator terminals.

Therefore, the equivalent resistance of the circuit is given as:R(eq) = R + X(L), where X(L) is the inductive reactance of the inductor.

Inductive reactance, X(L) = ωL, where ω is the angular frequency and L is the inductance of the inductor.

X(L) = ωL = 2πfL,

where f is the frequency of the generator.

The current flowing through the circuit is given as: I = V/R(eq)

Therefore, the average power consumed in the circuit is: P = I²R(eq)

Substituting the values of R, L, and P in the above formula, we get:P = 0.12 W

Hence, the average power consumed in the inductor resistor series circuit with an AC generator with a frequency of 1170 Hz and a constant rms voltage is 0.120 W.

Learn more about resistor series  here:

https://brainly.com/question/32613410

#SPJ11

The voltage and current functions are v(t) = 50 cos (6ft + 23.5°) and i(t) = -20 sin (6ft +61.2°), respectively. The phase angle between them is 0.66 radians or 37.8 degrees.

To determine the phase angle between the voltage and current functions, we need to find the phase difference between the cosine and sine functions that represent them.

The general form of a cosine function is given by:

cos(wt + theta)

where w is the angular frequency in radians per second, t is time in seconds, and theta is the initial phase angle in radians.

Similarly, the general form of a sine function is given by:

sin(wt + theta)

where w is the angular frequency in radians per second, t is time in seconds, and theta is the initial phase angle in radians.

Comparing the given functions for voltage and current with these general forms, we can see that the angular frequency is the same for both, and is equal to 6f radians per second. The phase angle for the voltage function is 23.5 degrees, or 0.41 radians, while the phase angle for the current function is 61.2 degrees, or 1.07 radians.

The phase difference between the two functions is given by the absolute difference between their phase angles, which is:

|0.41 - 1.07| = 0.66 radians

Therefore, the phase angle between the voltage and current functions is 0.66 radians, or approximately 37.8 degrees.

To know more about voltage and current functions, visit:
brainly.com/question/31478615
#SPJ11

The maximum kinetic energy of the photoelectron emitted from a photocell with a stopping potential of 4.20V is 6.72 x 10^-19J.

This value is obtained by using the relationship between energy, charge, and voltage. The photoelectric effect, which describes this phenomenon, illustrates how energy is transferred from photons to electrons. The stopping potential (V) is the minimum voltage needed to stop the highest energy electrons that are emitted. Therefore, the maximum kinetic energy (K.E) of an electron can be calculated using the equation K.E = eV, where e is the charge of an electron (approximately 1.60 x 10^-19 coulombs). Substituting the given values, K.E = 1.60 x 10^-19 C * 4.20 V = 6.72 x 10^-19 J. Hence, option a) is the correct answer.

Learn more about the photoelectric effect here:

https://brainly.com/question/9260704

#SPJ11

A ball is thrown at a 37° angle above the horizontal across level ground. It is released from a height of 3.00 m above the ground with a speed of 20 m/s. Therefore, the maximum height reached by the ball from the ground is approximately 9.15 m.

To calculate the maximum height reached by the ball from the ground, we can use the equations of motion for projectile motion.

We can start by breaking down the initial velocity of the ball into its horizontal and vertical components.

Given that the ball is thrown at an angle of 37° above the horizontal, the horizontal component of the velocity is given by v_x = v cos θ, and the vertical component is given by v_y = v sin θ, where v is the initial speed of the ball, and θ is the angle of the velocity vector.

Therefore, we have:v_x = 20 cos 37° = 15.92 m/sv_y = 20 sin 37° = 12.06 m/sNext, we can use the equation for the maximum height reached by a projectile, which is given by:y_max = y_0 + v_y^2 / (2g),where y_0 is the initial height of the projectile, and g is the acceleration due to gravity, which is approximately equal to 9.81 m/s².

Substituting the known values into the equation, we get:y_max = 3.00 m + (12.06 m/s)² / (2 × 9.81 m/s²)≈ 9.15 m

Therefore, the maximum height reached by the ball from the ground is approximately 9.15 m.

Learn more about projectile motion here:

https://brainly.com/question/12860905

#SPJ11

To determine the distance spanned by the diffraction spot, we need to consider the properties of the diffraction pattern and the given information.

Given:

- The screen is 30 cm behind the fish.

- The entire path of the laser, including the water and tissue, has an index of refraction close to that of water.

- The properties of the diffraction pattern are determined by the wavelength in water.

Since the diffraction pattern is formed by the interaction of light waves with obstacles or apertures, the spot's size or spread depends on factors such as the wavelength of light and the size of the aperture.

Without specific information about the wavelength or aperture size, it is not possible to determine the exact distance spanned by the diffraction spot. Additional details regarding the specific setup or measurements would be necessary to calculate or estimate the distance spanned by the diffraction spot.

Please provide further information or clarify the parameters related to the diffraction setup if you require a more specific answer.

Learn more about diffraction spot

brainly.com/question/30047488

#SPJ11

The marbles will land approximately 0.479 meters, or 47.9 centimeters, out into the yard.

To determine how far the marbles will land in the yard, we can use the principle of projectile motion. Since the marble is launched horizontally, its initial vertical velocity is 0 m/s.

We can use the following kinematic equation to find the horizontal distance traveled by the marble:

d = v_x * t

where:

d is the horizontal distance traveled,

v_x is the horizontal velocity of the marble, and

t is the time of flight.

First, let's calculate the time of flight. We can use the equation for vertical displacement in free fall:

y = (1/2) * g * t^2

where:

y is the vertical displacement,

g is the acceleration due to gravity (approximately 9.8 m/s^2), and

t is the time of flight.

Given that the vertical displacement is 6.56 meters, we can rearrange the equation to solve for time:

t = sqrt(2y/g)

t = sqrt(2 * 6.56 / 9.8)

t ≈ 1.028 seconds

Now, let's calculate the horizontal velocity. Since there is no horizontal acceleration, the horizontal velocity remains constant throughout the motion. We can use the horizontal distance traveled on the desk (48.0 cm = 0.48 meters) and the time of flight to find the horizontal velocity:

d = v_x * t

0.48 = v_x * 1.028

v_x ≈ 0.466 m/s

Finally, we can calculate the horizontal distance the marble will travel to the ground (in the yard) using the horizontal velocity and the time of flight:

d = v_x * t

d = 0.466 * 1.028

d ≈ 0.479 meters

Therefore, the marbles will land approximately 0.479 meters, or 47.9 centimeters, out into the yard.

Learn more about vertical velocity

https://brainly.com/question/29026497

#SPJ11

The magnitude of the speed of the package when it hits the ground (in m/s) is 327 m/s. Answer: 327.

The magnitude of the speed of the package when it hits the ground (in m/s) can be determined as follows:Given,An airplane is flying horizontally above the ground at an altitude of 2089 m.Forward velocity of the airplane is 260 m/s.The package is released with no additional forward or vertical velocity.We can determine the time taken by the package to reach the ground using the formula below:h = 1/2 * g * t² , where h is the height of the airplane from the ground, g is acceleration due to gravity, and t is time taken to reach the ground.

Rearranging this equation, we get,t = sqrt(2h/g)Substituting the values in this equation, we get,t = sqrt(2 * 2089 / 9.81) = 20.2 sTherefore, it takes 20.2 seconds for the package to reach the ground.When the package is released from the airplane, it acquires the same horizontal velocity as that of the airplane. Hence, the horizontal component of the velocity of the package is 260 m/s.

The vertical component of the velocity of the package can be determined as follows:u = 0, v = ?, a = g, t = 20.2 sWe can use the following formula to determine the vertical component of the velocity of the package:v = u + atSubstituting the values in this equation, we get,v = 0 + 9.81 * 20.2 = 198.5 m/sTherefore, the magnitude of the speed of the package when it hits the ground (in m/s) is given by the formula below:v = sqrt(v_horizontal² + v_vertical²)Substituting the values in this equation, we get:v = sqrt(260² + 198.5²) = 327 m/sTherefore, the magnitude of the speed of the package when it hits the ground (in m/s) is 327 m/s. Answer: 327.

Learn more about Speed here,what is speed?.............

https://brainly.com/question/13943409

#SPJ11

To determine the magnitude of the electric field at a distance of 2.5 cm from the axis of the cylinder. The magnitude of the electric field at a distance of 2.5 cm from the axis of the cylinder is approximately 135,453 N/C.

Radius of the cylinder (r) = 10 cm = 0.1 m Charge density (ρ) = 6.0 nC/m³ Distance from the axis (d) = 2.5 cm = 0.025 m To calculate the electric field, we can use the formula: Electric field (E) = (ρ * r) / (2 * ε₀ * d) Where ε₀ is the permittivity of free space.

Substituting the given values and the constant value of ε₀ (8.854 x 10^-12 C²/(N·m²)) into the formula, we can calculate the magnitude of the electric field. Electric field (E) = (6.0 nC/m³ * 0.1 m) / (2 * 8.854 x 10^-12 C²/(N·m²) * 0.025 m) Calculating the expression: Electric field (E) ≈ 135,453 N/C

Learn more about electric field here:

https://brainly.com/question/11482745

#SPJ11

The liquid coolant in automobile engines serves the purpose of carrying excess heat away from the combustion chamber by maintaining a lower temperature than the engine and its components.

The liquid coolant in automobile engines plays a crucial role in preventing overheating and maintaining optimal operating temperatures. The engine produces a significant amount of heat during the combustion process, and if left unchecked, this excess heat can cause damage to engine components.

The liquid coolant, typically a mixture of water and antifreeze, circulates through the engine and absorbs heat from the combustion chamber, cylinder walls, and other hot engine parts.

To effectively carry away the excess heat, the temperature of the coolant must remain lower than that of the engine and its components. This temperature differential allows heat transfer to occur, as heat naturally flows from a higher temperature region to a lower temperature region.

The coolant absorbs the heat and carries it away to the radiator, where it releases the heat to the surrounding air. Maintaining a lower temperature than the engine is essential because it ensures that the coolant can continuously absorb heat without reaching its boiling point or becoming ineffective.

If the coolant were to reach its boiling point, it would form vapor bubbles, leading to vapor lock and reduced cooling efficiency. Additionally, if the coolant's temperature exceeded the safe operating limits of engine components, it could lead to engine damage, such as warped cylinder heads or blown gaskets.

In conclusion, the purpose of the liquid coolant in automobile engines is to carry away excess heat by maintaining a temperature below that of the engine and its components. This allows for effective heat transfer, preventing overheating and potential damage to the engine.

Learn more about temperature here ;

https://brainly.com/question/32152925

#SPJ11

The correct option is c. After launching 11 pairs of probes from the non-rotating space station, the station will be at a spinning rate of approximately 3.11 rpm (revolutions per minute).

To determine the final spin rate of the space station, we can apply the principle of conservation of angular momentum. Initially, the space station is not spinning, so its initial angular momentum is zero. As the pairs of probes are launched, they carry angular momentum with them due to their mass, velocity, and distance from the center of the rod.

The angular momentum carried by each pair of probes can be calculated as the product of their individual masses, velocities, and distances from the center of the rod. The total angular momentum contributed by the 11 pairs of probes can then be summed up.

Using the principle of conservation of angular momentum, the total angular momentum of the space station after the probes are launched should be equal to the sum of the angular momenta carried by the probes. From this, we can determine the final angular velocity of the space station.

Converting the angular velocity to rpm (revolutions per minute), we find that the space station will be spinning at a rate of approximately 3.11 rpm after launching 11 pairs of probes.

Learn more about spinning rate here:

https://brainly.com/question/31236736

#SPJ11

The intensity of the second wave is 4.83e-11 times the intensity of the first wave. Therefore, the correct answer is B) 4.83e-11.

The intensity (I) of a wave is directly proportional to the square of the energy density and the square of the wave speed. Mathematically, I = (1/2)ρv^2, where ρ is the energy density and v is the wave speed.

In this case, the second wave has 14 times the energy density and 29 times the speed of the first wave. Therefore, the intensity of the second wave can be calculated as follows: I2 = (1/2)(14ρ)(29v)^2 = 4.83e-11I

Learn more about wave here:

https://brainly.com/question/25954805

#SPJ11