In the given question, 0.550 J/g-°C is the specific heat of the metal. The correct answer is option a.
Specific heat is defined as the amount of heat energy needed to raise the temperature of one unit of mass of a substance by one degree Celsius (or one Kelvin).
To calculate the specific heat of the metal, we can use the equation:
q(metal) = -q(water)
where q(metal) is the heat absorbed by the metal, and q(water) is the heat released by the water. The negative sign indicates that the heat lost by the water is equal in magnitude to the heat gained by the metal.
c(metal) = [m(water) [tex]\times[/tex] c(water) [tex]\times[/tex] ΔT] / [m(metal) [tex]\times[/tex] ΔT]
where,
c(metal) is the specific heat of the metal,
m(water) is the mass of the water,
c(water) is the specific heat of water,
ΔT is the change in temperature and
m(metal) is the mass of the metal.
Substituting the given values, we get:
c(metal) = [100.0 g [tex]\times[/tex] 4.18 J/g-°C [tex]\times[/tex] (25.7°C - 15.0°C)] / [72.0 g [tex]\times[/tex] (105.3°C - 25.7°C)]
c(metal) = 0.550 J/g-°C
Therefore, the specific heat of the metal is option a. 0.550 J/g-°C.
Learn more about Specific heat here:
https://brainly.com/question/31608647
#SPJ12
what will happen to the ph of an acetic acid solution when chloride ion is added? group of answer choices ph increases ph decreases ph remains unchanged
When chloride ion is added to an acetic acid solution, the pH of the solution remains unchanged. Acetic acid is a weak acid, and its dissociation in water can be represented by the following equilibrium reaction:
CH3COOH (aq) + H2O (l) ⇌ CH3COO- (aq) + H3O+ (aq)
When chloride ions (Cl-) are added to the solution, they do not react with acetic acid, its conjugate base (acetate ion, CH3COO-), or hydronium ions (H3O+). Chloride ions are the conjugate base of a strong acid, hydrochloric acid (HCl), and are considered to be a non-reactive or inert ion in this context. Since the chloride ions do not participate in the reaction, they do not affect the equilibrium position or the concentrations of the species involved in the reaction.
As a result, the addition of chloride ions does not influence the pH of the acetic acid solution. The pH remains unchanged because the concentration of hydronium ions (H3O+), which determine the pH, is not altered by the presence of chloride ions.
for more such question on pH
https://brainly.com/question/172153
#SPJ11
Why is carbon used to extract metals from their oxides
1-cheap
2- high_____
Because of its high reactivity, cheap cost, and versatility in the extraction procedure, carbon is used to extract metals from their oxides.
Carbon is commonly used as a reducing agent to extract metals from their oxides because of its high reactivity and low cost. When a metal oxide is heated with carbon, a reduction reaction occurs, with carbon atoms reacting with oxygen atoms to form carbon dioxide (CO2) and the metal atoms being reduced to their elemental form.
One of the main advantages of using carbon for this process is its high reactivity. Carbon has a strong affinity for oxygen, and as such, it readily reacts with metal oxides to reduce them. Carbon is also abundant and relatively cheap, making it a cost-effective reducing agent.
Additionally, the use of carbon as a reducing agent can be carried out in a range of conditions, such as in a blast furnace, making it a versatile method for extracting metals from their ores. This method is widely used in industry for the extraction of metals such as iron, zinc, and lead, among others.
In summary, carbon is used to extract metals from their oxides due to its high reactivity, low cost, and versatility in the extraction process.
To learn more about oxides refer to:
brainly.com/question/9496279
#SPJ4
describe the procedure for the preparation you chose for each ester. make sure the procedure matches the method you selected above and that you include all reagents.
The procedure for the preparation you chose for each ester are: heat the reagents, add aqueous solution, heat and stir the mixture, cool it down, add sodium bicarbonate, the ester is separated by filtration and lastly crude ester can be purified by recrystallization.
The procedure for the preparation of an ester involves several steps which are in detail below:.
First, the reagents, which can include an acid, an alcohol, and a catalyst, must be combined in a round-bottom flask. Heat is then applied and the mixture is agitated, either manually or with a stirrer.
After the reaction is complete, the mixture is cooled, and an aqueous solution of a base, such as sodium bicarbonate, is added. This causes the ester to precipitate out and is separated from the aqueous layer by filtration.
The crude ester can then be purified, typically by recrystallization. The reagents used will depend on the ester to be prepared. For example, for the preparation of ethyl acetate, acetic acid, ethanol, and sulfuric acid can be used as the reagents.
To complete the reaction, the acid, alcohol, and catalyst are combined in the round-bottom flask, heated and stirred, and cooled. Then, the aqueous solution of sodium bicarbonate is added and the ester is separated by filtration. Finally, the crude ester can be purified by recrystallization.
To know more about ester refer here:
https://brainly.com/question/9459983#
#SPJ11
The following two compounds can be distinguished by
OH CH-CH
CH-OH
and
Neutral FeCl3
NaOl/OH
O Aq. AgNO3
Na
The two compounds can be distinguished by their chemical properties and reactivity with different reagents.
The first compound has an alcohol functional group (-OH) attached to a carbon-carbon double bond (-CH=CH-), while the second compound has an alcohol group (-OH) attached to a carbon atom that is bonded to an oxygen atom (-CH-OH). These two compounds can be distinguished by their different molecular structures and chemical properties, which can affect their solubility, acidity, and reactivity with other chemicals.
The second compound can be distinguished from the first compound and neutral FeCl₃ by its reaction with NaOH or NaOl. NaOH or NaOl reacts with the second compound to produce a yellow-orange color due to the formation of a complex between iron(III) ions and the phenolic group in the compound. Neutral FeCl₃ also reacts with the phenolic group, but it produces a dark green color instead. This difference in color can be used to distinguish the two compounds.
Finally, the second compound can also be distinguished from the first compound by its reaction with aqueous AgNO₃. The second compound can react with AgNO₃ to form a white precipitate, while the first compound does not react with AgNO₃. This is due to the presence of the phenolic group in the second compound, which can form a silver phenoxide precipitate.
To learn more about compounds refer to:
brainly.com/question/13516179
#SPJ4
he three radioactive series that occur in nature end with what element? the three radioactive series that occur in nature end with what element? bi pb po hg u g
The three radioactive series that occur in nature end with three different elements. These elements are Bismuth (Bi), Lead (Pb), and Polonium (Po). The correct options are a, b, and c.
Bismuth (Bi) is the most stable element of the three and has a half-life of 19 billion years. Lead (Pb) is the next most stable, with a half-life of 22 million years. Polonium (Po) has the shortest half-life of the three, at only 138 days.
Radioactive decay is the process by which an unstable atom loses energy. During this process, the atom's nucleus splits into two or more parts, releasing gamma rays, subatomic particles, or alpha and beta particles. Radioactive decay also causes the atom to transmute into a different element.
When atoms of an unstable element undergo radioactive decay, they move along a decay chain, forming a series of different elements. The three radioactive series that occur in nature all start with Uranium and Thorium and end with Bismuth, Lead, and Polonium. These are known as the Uranium-238, Thorium-232, and Actinium-228 series, respectively.
In conclusion, the three radioactive series that occur in nature end with Bismuth (Bi), Lead (Pb), and Polonium (Po).
To know more about radioactive series, refer here:
https://brainly.com/question/4189425#
#SPJ11
What is the role of the primary standard in an acid-base titration? It serves as an unknown concentration that is determined using the secondary standard. It is used to find the stoichiometry of the titration reaction. O It is used to determine the unknown concentration of an acid or base that is more difficult to measure. It changes color to determine the equivalence point of a titration.
The primary standard is used to standardize the titrant solution (usually a strong acid or strong base) by reacting it with the primary standard to determine its exact concentration.
The primary standard is a substance used as a reference in the preparation of solutions for acid-base titrations. It is a highly pure and stable compound with a known molar mass and can be easily weighed and dissolved in solution to prepare a standard solution of known concentration. This allows for the accurate determination of the concentration of an unknown solution, such as an acid or a base, by titrating it with the standardized titrant solution. Therefore, the primary standard plays a crucial role in ensuring the accuracy of acid-base titrations.
To know more about primary standard, here
brainly.com/question/17134477
#SPJ4
in general, which reaction is favored (forward, reverse, or neither) if the value of keq at a specified temperature is
When the value of K_eq at a specified temperature is in general, which reaction is favored (forward, reverse, or neither)?When the value of K_eq at a given temperature is greater than 1,
the forward reaction is favored. Conversely, when K_eq is less than 1, the reverse reaction is favored. At equilibrium, when K_eq is equal to 1, the reaction is neither forward nor reverse but is instead stable. Furthermore, it implies that both the forward and reverse reactions occur at the same rate.Thus, in general, the reaction that is favored depends on the value of K_eq. When the value of K_eq is greater than 1, the forward reaction is favored. Conversely, when K_eq is less than 1, the reverse reaction is favored. When K_eq equals 1, the reaction is neither forward nor reverse but is instead at equilibrium.
for more such question on equilibrium
https://brainly.com/question/13414142
#SPJ11
any compound that increases the number of hydronium ions when dissolved in water, is called ?
A compound that increases the number of hydronium ions (H₃O⁺) when dissolved in water is called an acid. Acids are characterized by their ability to donate protons (H⁺) to water molecules, resulting in the formation of hydronium ions. This process is known as acid dissociation.
The strength of an acid is determined by its ability to donate protons. Strong acids, such as hydrochloric acid (HCl) or sulfuric acid (H₂SO₄), completely dissociate in water, resulting in a high concentration of hydronium ions. Weak acids, such as acetic acid (CH₃COOH), only partially dissociate in water, resulting in a lower concentration of hydronium ions.
Acids can have a wide range of applications in industry and everyday life, from the production of fertilizers and cleaning products to the preservation of food and the regulation of pH in the human body.
To learn more about hydronium ions refer to:
brainly.com/question/14619642
#SPJ4
In general what did farmers and factory owners in the South use to transport their goods?
Farmers and factory owners in the South primarily used rivers and railroads to transport their goods.
The South had an extensive network of navigable rivers, such as the Mississippi, Tennessee, and Ohio, which made river transportation a practical and efficient means of moving goods to market. Steamboats were commonly used to transport agricultural products, such as cotton, tobacco, and sugar, downriver to ports on the Gulf of Mexico and the Atlantic Ocean. Railroads were also crucial to the transportation of goods, especially after the Civil War when railroads expanded across the South. The development of railroads facilitated the movement of goods between towns and cities, as well as the transportation of agricultural products from rural areas to urban markets.
Find out more about transport
brainly.com/question/29426090
#SPJ4
Boric acid is a triprotic acid that is used as an ant and roach killer. A 1.42-g sample of boric acid is neutralized
by 157 mL of 0.4388 M NaOH. Determine the molar mass (g/mol) for boric acid.
H2A+ 3 NaOH
NajA+ 3 H2O
The correct answer is The balanced chemical equation for the neutralization reaction between boric acid [tex](H2A)[/tex] and sodium hydroxide [tex](NaOH)[/tex]is:
[tex]H2A + 3 NaOH → Na3A + 3 H2O[/tex]
From the balanced equation, we can see that one mole of boric acid reacts with three moles of sodium hydroxide. Therefore, we need to find the number of moles of sodium hydroxide used to neutralize the given sample of boric acid, and then use the stoichiometry of the balanced equation to determine the number of moles of boric acid. The number of moles of NaOH used can be calculated as follows: moles of NaOH = (concentration of NaOH) x (volume of NaOH used) moles of NaOH = (0.4388 mol/L) x (0.157 L) moles of NaOH = 0.06886 mol According to the stoichiometry of the balanced equation, three moles of NaOH are required to neutralize one mole of boric acid. Therefore, the number of moles of boric acid can be calculated as: moles of H2A = (1/3) x (moles of NaOH) moles of H2A = (1/3) x (0.06886 mol) moles of H2A = 0.02295 mol The molar mass of boric acid can now be calculated using the formula: molar mass (g/mol) = (mass of sample) / [tex](moles of H2A)[/tex]Substituting the given values, we get: molar mass (g/mol) = (1.42 g) / (0.02295 mol) molar mass (g/mol) = 61.95 g/mol Therefore, the molar mass of boric acid is 61.95 g/mol.
To learn more about neutralization click on the link below:
brainly.com/question/27891712
#SPJ1
7. the mass percent of phosphoric acid in cola has been reported to be 0.075y mass. how does your answer compare to this value (use percent difference to make this comparison)?
To compare your answer to the reported mass percent of phosphoric acid in cola (0.075y mass), use the percent difference formula:
Percent Difference = (|Your Value - Reported Value| / (Your Value + Reported Value) / 2) * 100
1. Insert the calculated mass percent of phosphoric acid in place of "Your Value" in the formula.
2. Substitute 0.075y mass for "Reported Value".
3. Calculate the absolute difference between your value and the reported value.
4. Divide the absolute difference by the average of your value and the reported value.
5. Multiply the result by 100 to get the percent difference.
By following these steps, compare the answer to the reported mass percent of phosphoric acid in cola using percent difference.
Learn more about mass percent here: https://brainly.com/question/17704762
#SPJ11
Infer imagine having a unit cell of each type of crystal lattice composed of identical atoms. How would their densities compare? Explain your reasoning.
The arrangement of the atoms inside the unit cell will determine the densities of the various forms of crystal lattices made of identical atoms. Varying atom configurations in different crystal lattices can lead to varied densities.
Explain your reasoning.As an illustration, a straightforward cubic lattice only has atoms at the corners, and each corner atom is shared by eight unit cells. As the cube of the edge length determines the volume of the unit cell, the volume of the unit cell is equal to a3, where an is the length of the edge. As there is only one atom per corner, the unit cell contains one atom, and its mass is determined by the product of the number of atoms and the atomic mass. Hence, the density of a straightforward cubic lattice is
density = mass/volume = (atomic mass)/(a^3)
to know more about densities here:
brainly.com/question/29775886
#SPJ9
give the expected product of the following reaction.
We are given the benzaldehyde and it is treated with phosphorus ylide and we know when carbonyl group is reacted with phosphorus ylide there is formed alkene by remoing the O from carbonyl and attached the phosphorus ylide alkane part
Benzaldehyde is an aromatic compound with a distinct odour resembling almonds. It can be extracted from a variety of natural sources and can also be synthesised by liquid phase chlorination of toluene. There is no chemical distinction between these two types of benzaldehyde.Benzaldehyde is a widely used compound in the chemical industry. It also finds usage in several other items
To know more about benzaldehyde click here
brainly.com/question/28146845
#SPJ4
) the student proposes to perform another titration using a 0.139 g sample of h2c2o4 , but this time using 0.00143 m kmno4(aq) in the buret. would this titrant concentration be a reasonable choice to use if the student followed the same procedure and used the same equipment as before? justify your response.
If the student followed the same procedure and used the same equipment as before, then 0.00143 M [tex]KMnO_{4}[/tex](aq) in the burette would not be a reasonable choice for a titrant concentration.
Thus, the correct answer is "No, it would not".
The reаson why 0.00143 M [tex]KMnO_{4}[/tex](аq) in the burette would not be а reаsonаble choice for а titrаnt concentrаtion is the molаrity of the [tex]KMnO_{4}[/tex] the solution in the burette must be increаsed to decreаse the volume of the solution required for oxidаtion. This is becаuse oxаlic аcid, which is а weаk orgаnic аcid, requires а strong oxidizing аgent such аs [tex]KMnO_{4}[/tex] to reаct.
It is importаnt to note thаt а minimum of 5-6 mL of [tex]KMnO_{4}[/tex] is required for the complete oxidаtion of 0.1 grаms of oxаlic аcid. Аs а result, if the concentrаtion of [tex]KMnO_{4}[/tex] is decreаsed, more [tex]KMnO_{4}[/tex] will be required to complete the oxidаtion of [tex]H_{2}C_{2}O_{4}[/tex]H2C2O4. Аs а result, а higher volume of the solution would be required to reаch the endpoint.
For more information about titrant concentration refers to the link: https://brainly.com/question/29725887
#SPJ11
Assume that 0.950g of KHT (potassium hydrogen tartrate) are dissolved in 25.00mL of solution.KHT -> K++ HT-a) calculate the solubility of KHT for these conditions in g KHT / L of solutionb) Calculate the solubility of KHT for these conditions in mol KHT / L of solutionc) Determine [K+] and [HT-] in this solution. If the temperature is Tp, a trace of solid is present and the reaction is at equilibrium. Determine Ksp at this temperature
a) Solubility (g KHT/L) = (0.950 g KHT) / (0.025 L) = 38 g KHT/L
b) Solubility (mol KHT/L) = (38 g KHT/L) / (188.18 g/mol) = 0.202 mol KHT/L
c) [K+] = [HT-] = 0.202 mol KHT/L
d) Ksp = (0.202)(0.202) = 0.0408
A more detailed explanation of the answer.
a) To calculate the solubility of KHT in g KHT/L of solution, follow these steps:
1. Convert the volume of the solution to liters: 25.00 mL = 0.025 L
2. Calculate the solubility by dividing the mass of KHT by the volume of the solution:
Solubility (g KHT/L) = (0.950 g KHT) / (0.025 L) = 38 g KHT/L
b) To calculate the solubility of KHT in mol KHT/L of solution, follow these steps:
1. Determine the molar mass of KHT (K = 39.10 g/mol, H = 1.01 g/mol, C = 12.01 g/mol, O = 16.00 g/mol):
Molar mass of KHT = K + 2*(C + H + 2*O) = 39.10 + 2*(12.01 + 1.01 + 2*16.00) = 188.18 g/mol
2. Convert the solubility from g KHT/L to mol KHT/L:
Solubility (mol KHT/L) = (38 g KHT/L) / (188.18 g/mol) = 0.202 mol KHT/L
c) To determine [K+] and [HT-] in this solution, follow these steps:
1. Since KHT dissociates into K+ and HT-, the concentrations of K+ and HT- will be equal to the solubility of KHT in mol KHT/L:
[K+] = [HT-] = 0.202 mol KHT/L
As there is a trace of solid present and the reaction is at equilibrium, we can determine the Ksp at this temperature by following these steps:
1. Write the balanced chemical equation for the dissociation of KHT: KHT (s) <-> K+ (aq) + HT- (aq)
2. Write the expression for the Ksp: Ksp = [K+][HT-]
3. Plug in the concentrations calculated earlier: Ksp = (0.202)(0.202) = 0.0408
So, at this temperature (Tp), the Ksp for KHT is 0.0408.
Learn more about molar mass.
brainly.com/question/22997914
#SPJ11
what will usually happen to the precipitated over time?
Answer:
Precipitation falls to the ground as snow and rain. It eventually evaporates and rises back into the atmosphere as a gas. In clouds, it turns back into liquid or solid water, and it falls to Earth again.
Explanation:
Answer:
Precipitation is the process of a compound coming out of solution. It is the opposite of dissolution or solvation. In dissolution, the solute particles separate from each other and are surrounded by solvent molecules. In precipitation, the solute particles find each other and form a solid together
When 1 mole of methane (CH4) is burned it releaes 461.9 KJ of heat.
Calculate ΔH for a process in which 8.0 g of methane is burned.
1 mole of methane (CH₄) is burned it releases 461.9 KJ of heat then the ΔH for the combustion of 8.0 g of methane is 230.1 kJ.
To calculate the ΔH for the combustion of 8.0 g of methane, we need to first convert the mass of methane to moles.
The molar mass of methane (CH₄) is:
C: 12.01 g/mol
H: 1.01 g/mol
4 x H: 4.04 g/mol
Molar mass of CH₄ = 12.01 + 4.04 = 16.05 g/mol
So, 8.0 g of CH₄ is equal to:
n = m/M = 8.0 g / 16.05 g/mol = 0.498 moles of CH₄
Now, we can use the molar heat of combustion to calculate ΔH:
ΔH = n x ΔHcomb
ΔHcomb is the molar heat of combustion, which is given as 461.9 kJ/mol.
ΔH = 0.498 moles x 461.9 kJ/mol = 230.1 kJ
Methane is a chemical compound with the formula CH₄. It is a colorless, odorless, and flammable gas that is the primary component of natural gas. Methane is the simplest hydrocarbon and the main component of biogas and landfill gas. It is also a potent greenhouse gas and a major contributor to climate change. Methane is used as a fuel for heating, cooking, and electricity generation, as well as in industrial processes such as chemical synthesis and metal production.
Learn more about methane here:
https://brainly.com/question/2127750
#SPJ1
Suppose your sample of magnesium was contaminated with an equal weight of MgCl2. How would the contamination affect the change in enthalpy for the Mg–HCl reaction? Justify your answer
exchange occurs.
QUESTION 4 DOK 34 ALIGNED STANDARDS
10 points
A chemical reaction between
bromine and sodium occurs.
Bromine has an electronegativity
value of 2.96, while sodium has an
electronegativity value of 0.93,
Will electrons be exchanged between
the two atoms? Explain how you
know.
With fewer valence electrons than other metals, sodium tends to increase its stability by shedding electrons during action creation.
What happens when bromine and sodium combine?To create sodium bromide or sodium iodide, hot sodium can also burn in vaporised bromine or iodine. An orange flame and a white solid are the results of each of these reactions.
What number of bonds can bromine form?In its Lewis structure, bromine contains three lone pairs on each of its atoms and just one Br-Br bond. The three lone pairs and one bond between the bromine atoms are the only connections between them.
To know more about electrons visit:-
https://brainly.com/question/28977387
#SPJ1
What change in volume results if 40 mL of gas is cooled from 33 °C to 5 °C?
Charles's Law-
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\star\longrightarrow\sf \underline{\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}}\\[/tex]
Where:-
V₁ = Initial volumeT₁ = Initial temperatureV₂ = Final volumeT₂ = Final temperatureAs per question, we are given that -
V₁=40 mLT₁ = 33°CT₂ =5°CWe are given the initial temperature and the final temperature in °C.So, we first have to convert those temperatures in Celsius to kelvin by adding 273-
[tex]\:\:\:\:\:\:\star\sf T_1[/tex] = 33+ 273 = 306K
[tex]\:\:\:\:\:\:\star\sf T_2[/tex] =5+273 = 278K
Now that we have obtained all the required values, so we can put them into the formula and solve for V₂ :-
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\star\longrightarrow\sf \underline{\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}}\\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2= \dfrac{V_1}{T_1}\times T_2\\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2= \dfrac{40}{306}\times 278\\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2= 0.13071...........\times 278\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf V_2 = 36.33892...........\\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf\underline{ V_2 = 36.34 \:mL}\\[/tex]
Therefore, the volume will become 36.34 mL if 40 mL of gas is cooled from 33 °C to 5 °C.
when sodium chloride dissolves in water, how do the water molecules orient around the ions? question 6 options: a) the oxygen atoms point toward the sodium ions, and the hydrogen atoms point toward the chloride ions. b) the hydrogen atoms point toward both the sodium and the chloride ions. c) the oxygen atoms point toward both the sodium ions and the chloride ions. d) the hydrogen atoms point toward the sodium ions, and the oxygen atoms point toward the chloride ions. e) water molecules are randomly oriented around the ions.
When sodium chloride dissolves in water, water molecules orient around the ions in such a way that the hydrogen atoms point toward the chloride ions. The correct option is b.
When sodium chloride (NaCl) dissolves in water, it separates into [tex]Na^+[/tex] and [tex]Cl^-[/tex] ions. As a result, water molecules surround the ions, shielding them from one another. Water molecules are orientated around the ions in such a way that their hydrogen atoms (δ+) are directed toward the chloride ions ( [tex]Cl^-[/tex]) and their oxygen atoms (δ-) are directed toward the sodium ions ([tex]Na^+[/tex]).
A water molecule has two positively charged hydrogen atoms and one negatively charged oxygen atom that form a V-shaped geometry, with the oxygen atom at the vertex. The H-O-H bond angle is 104.5 degrees. As a result, when[tex]Na^+[/tex] and [tex]Cl^-[/tex] ions are present in water, they are surrounded by water molecules, with their hydrogen atoms pointed toward the [tex]Cl^-[/tex] and their oxygen atoms pointed toward the [tex]Na^+[/tex] .
In summary, when sodium chloride dissolves in water, the water molecules orient around the ions in such a way that the hydrogen atoms point toward the chloride ions. The correct option is b.
To know more about sodium chloride refer here :
https://brainly.com/question/30460299
#SPJ11
does your melting point obtained for your product indicate that your sample is indeed phenacetin? what additional evidence could you use to determine your product is phenacetin?
The melting point obtained for the product is an indication that the sample is phenacetin. To determine that the product is phenacetin, other supporting evidence may include elemental analysis and infrared spectroscopy
Melting point tests are utilized in the identification and characterization of organic compounds. The melting point of a sample is determined by heating it at a steady rate until it begins to liquefy, and the temperature at which it starts to melt is taken as the melting point of the sample. The melting point of a solid, including phenacetin, is usually given in reference books.
The fact that the sample has the same melting point as that given for phenacetin in reference books suggests that it is indeed phenacetin. To further confirm that the product is phenacetin, additional tests such as elemental analysis or infrared spectroscopy could be carried out. These tests can provide additional evidence to support the identification of the product.
Learn more about melting point tests at:
https://brainly.com/question/29679674
#SPJ11
write the chemical equation for the ionization of water.
The chemical equation for the ionization of water is: 2H₂O (l) → 2H+ (aq) + O₂- (aq).
Ionization is the process of breaking apart a molecule into its separate atoms or ions. In the case of water, it is a molecule composed of two hydrogen atoms and one oxygen atom. The ionization of water occurs when these atoms are split apart, creating hydrogen ions (H+) and hydroxide ions (O₂-). This process requires energy, which is usually in the form of heat.
The reaction of water being ionized can be represented by the chemical equation: 2H₂O (l) → 2H+ (aq) + O₂- (aq). This equation shows that two molecules of water (H₂O) are broken apart into two hydrogen ions (H+) and one hydroxide ion (O₂-).
Ionization of water is an important process in many chemical and biological reactions. In the human body, for example, the ionization of water helps to regulate the body's pH level. It is also important for the formation of certain acids and bases, and the solubility of various compounds in water.
In addition, the ionization of water is a necessary step in the formation of electrical currents and is also an important part of the photosynthesis process.
In summary, the chemical equation for the ionization of water is 2H₂O (l) → 2H+ (aq) + O₂- (aq). This process is essential for many chemical and biological reactions and helps to regulate the body's pH level, and the solubility of compounds in water, and is part of the photosynthesis process.
To know more about the ionization of water refer here:
https://brainly.com/question/13378385#
#SPJ11
How many moles exist in 390 g of silver nitrate (AgNO3)? 2
Answer:
The formula AgNO3 gives us 1 Ag atom,
1 N atom and
3 oxygen atoms.
From the periodic table we get the atomic mass of each of these atoms:
Ag 108 g/mol,
N 14.0 g/mol,
O 16.0 g/mol
For each atom, mutiply the number of atoms by its atomic mass, and then sum the values:
molar mass of
AgNO3 = (1 x 108) + (1 x 14.0) + (3 x 16.0) = 170 g/mol
So now let’s return to our four step process to solve the problem.
Here’s the updated data:
n = ? mol,
m = 80.00 g,
M = 170 g/mol
Here’s the formula: n = m / M
Now, substitute the data values into the formula:
n = 80.00 / 170
And calculate the answer: n = 0.4705882353 mol
Rounding the answer to 3 significant figures:
the amount of AgNO3 in 80.00 grams is 0.471 molDO MARK AS BRAINLIEST
1. What is the pH of a solution where 50.0 mL of 0.050 M NH3 is mixed with 12.0 mL of 0.10 M hydrobromic acid (HBr)? (Kb = 1.8 * 10-5)
Round your answer to two decimal places.
2. What is the pH at the ½ equivalence point? (Kb = 1.8 * 10-5)
1. The pH of the solution is 9.18, 2. pH at the half-equivalence point is 9.74.
1. When 50.0 mL of 0.050 M NH₃ is mixed with 12.0 mL of 0.10 M HBr, the moles of NH₃ and HBr are 0.0025 mol and 0.0012 mol respectively. Since HBr is a strong acid, it will react completely with NH₃ to form NH₄Br. The remaining NH₃ will undergo hydrolysis to form NH₄⁺ and OH⁻ ions.
The Kb expression for NH₃ is: Kb = [NH₄⁺][OH⁻]/[NH₃].
Rearranging this expression and solving for [OH⁻], we get [OH⁻] = √(Kb[NH₃]). Substituting the values, we get [OH⁻] = √(1.8 x 10⁻⁵ x (0.0025-0.0012)/(50+12) x 10⁻³) = 1.3 x 10⁻⁵ M.
The pOH of the solution is -log[OH⁻] = -log(1.3 x 10⁻⁵) = 4.89. The pH of the solution is 14 - pOH = 14 - 4.89 = 9.18.
2. The pH at the half-equivalence point is equal to the pKa of the conjugate acid of the base (NH₄⁺ in this case). The pKa can be calculated using the relationship pKa + pKb = pKw = 14. Substituting the value of pKb, we get pKa = 14 - pKb = 14 - (-log(1.8 x 10⁻⁵)) = 9.74. So, the pH at the half-equivalence point is 9.74.
To know more about half-equivalence point, refer here:
https://brainly.com/question/15407124#
#SPJ11
Identify the spectator ions in this reaction. Check all that apply.
H+ + CN + Li+ + OH → Lit + CN + H₂O
он+
O CN-
O Lit
OH-
H₂O
Answer:
The spectator ions are CN- and Li+
Explanation:
Spectator ions are ions in a chemical equation that don't participate in the reaction. To identify these ions you have to look for which ions are on both sides of the chemical equation.
In this chemical equation Li+ and CN- are on both sides of the equation making them spectator ions.
18.
The bonding in calcium nitrate is ionic, with Ca²+ and NO₂ ions present.
Using a diagram, or otherwise, explain how the ions interact with water when
forming a solution.
[2]
17.
(a) Explain the term electronegativity.
(b) The table gives some electronegativity values.
Atom
Electronegativity
Al
1-61
Be
1-57
H Mg
2-20 1-31
N
S
3.04 2-59
[1]
Select the two atoms from the list which would give the most polar bond when
[1]
combined.
Answer:
18
When calcium nitrate dissolves in water, the ionic bonds between the Ca²+ and NO₂ ions are broken due to the polarity of water molecules. The oxygen atoms of the water molecules have a partial negative charge while the hydrogen atoms have a partial positive charge. When Ca²+ ions are surrounded by water molecules, the partial negative charges on the oxygen atoms of water molecules interact with the positively charged Ca²+ ions through electrostatic attraction, forming a hydrated Ca²+ ion. Similarly, the partial positive charges on the hydrogen atoms of water molecules interact with the negatively charged NO₂ ions, forming hydrated NO₂ ions. The resulting solution consists of hydrated Ca²+ and NO₂ ions, dispersed evenly throughout the water.
17
(a) Electronegativity is a measure of an atom's ability to attract electrons towards itself when it is bonded to another atom. It is a relative scale, with the most electronegative element, fluorine, assigned a value of 4.0.
(b) The two atoms that would give the most polar bond when combined are Al and N. This is because they have the largest difference in electronegativity values, which is a measure of the polarity of a bond. The electronegativity difference between Al and N is 1.43, which is larger than any other combination of atoms given in the table
Fill in the table. If you could help that would be appreciated.
Modeling DNA Mutations Key involves:
e) A-T-T-G-T-A-G-A-C-G-C-T-T-A-T-G-A-C.
f) The protein produced from the mutated strand is Protein B.
g) The effect of this mutation on the organism is beneficial.
What are mutation keys?Mutation keys are a set of rules or guidelines used to represent changes in DNA sequences. They are commonly used in genetics to represent the effects of mutations on the amino acid sequence of a protein.
A mutation key can be a table or a chart that lists the different types of mutations, such as substitution, insertion, or deletion, and the resulting changes in the DNA sequence, the amino acid sequence, and the functional consequences of the mutation.
Learn more on mutation key here: https://brainly.com/question/14945117
#SPJ1
Image transcribed:
Modeling DNA Mutations Key
Base Sequence--|--Protein Produced--|--Effect of Mutation
T-T-C-G-T-AGACGCT-T-A-T-GA-C--|--Protein A--|--Neutral
ACC-GT-A-GA-C-G-C-T-T-A-T-G-A-C--|--Protein A--|--Neutral
A-T-GG-T-A-GACGCT-T-A-T-G-A-C--|--Protein A--|--Neutral
GT-CGT-A-GACGCTT-A-T-G-A-C--|--Protein B--|--Beneficial
AAC-GTAGACGC-T-T-A-T-G-A-C--|--Protein B--|--Beneficial
A-T-T-G-T-A-GACGCT-T-A-T-G-A-C--|--Protein B--|--Beneficial
C-T-C-G-T-A-GAC-GC-T-T-A-T-G-A-C--|--Protein C--|--Harmful
AGCGTAGACGCT-TAT-GAC--|--Protein C--|--Harmful
A-T-A-G-T-A-GACGCT-T-A-T-G-A-C--|--Protein C--|--Harmful
e) Find the base sequence from the key that matches the base sequence of the second mutated DNA strand from row C of Table 2.
f) Note the protein produced from this mutated strand and record it in row D of Table 2.
g) Note the effect of this mutation on the organism and record it in row E of Table 2.
Row--|--Description--|--Answers
A--|--Base sequence of original strand--|--A-T-C-G-T-A-G-A-C-G-C-T-T-A-T-G-A-C
B--|--Protein produced from original strand--|--Protein A
C--|--Base sequence of mutated strand--|--________
D--|--Protein produced from mutated strand--|--_______
E--|--Effect of mutation--|--______
write the balanced equation for the reaction in which aluminum is added to aqueous manganese(ii) sulfate. you do not need to include states of matter in your answer.
Two objects are moving at the same speed. Which (if any) of the following statements about them are true? Check all that apply. The de Broglie wavelength of the heavier object is longer than that of the lighter one. If one object has twice as much mass as the other, its wavelength is one-half the wavelength of the other. Doubling the mass of one of the objects will have the same effect on its wavelength as does doubling its speed
The correct options are B and C i.e., if one object has twice as much mass as the other, its wavelength is half the wavelength of the other and doubling the mass of one of the objects will have the same effect on its wavelength as does doubling its speed.
An object's de Broglie wavelength will vary predictably as its mass or velocity changes.
The de Broglie wavelength of an object is given by the formula λ = h/p, where λ is the wavelength, h is Planck's constant, and p is the momentum of the object. Momentum is given by the formula p = mv, where m is the mass of the object and v is its velocity.
Given that two objects are moving at the same speed, their velocities are equal, and their momenta are directly proportional to their masses. Therefore, we can make the following observations about their de Broglie wavelengths:
The de Broglie wavelength of the heavier object is shorter than that of the lighter one. This is because the momentum of the heavier object is greater than that of the lighter one, and the de Broglie wavelength is inversely proportional to the momentum.
If one object has twice as much mass as the other, its wavelength is half the wavelength of the other. This is because the momentum of the heavier object is twice that of the lighter one, and the de Broglie wavelength is inversely proportional to the momentum.
Doubling the mass of one of the objects will have the same effect on its wavelength as does doubling its speed. This is because both changes result in a doubling of the momentum of the object, and the de Broglie wavelength is inversely proportional to the momentum.
In summary, the de Broglie wavelength of an object is inversely proportional to its momentum, which is directly proportional to its mass and velocity. Therefore, changes in the mass or velocity of an object will have a predictable effect on its de Broglie wavelength.
To learn more about wavelength refer to:
brainly.com/question/27353508
#SPJ4