Suppose that the future price p(t) of a certain item is given by the following exponential function. In this function, p(t) is measured in dollars and r is the


number of years from today.


pt) = 2000(1. 039)'


QD


Find the initial price of the item.


SU


Does the function represent growth or decay?


O growth O decay


By what percent does the price change each year?

The two digit Combinations that never appear in any of the passcodes are 5 and 6.

There are 49 different passcodes that can be used. The sum of the six digits of the current passcode is 81, which is a square number. Therefore, the current passcode is made up of three different two-digit square numbers with the sum of their digits equal to 9.

The possible combinations are

(16, 25, 40),

(16, 49, 16),

(25, 36, 20),

(36, 49, 4),

(49, 64, 9),

(64, 81, 16), and

(81, 16, 64).

The only combination that has the same first and sixth digits is (16, 25, 40), so the current passcode is 162540.

Learn more about Combinations

https://brainly.com/question/4658834

#SPJ4

a.The velocity function is: v = ds/dt = (2/5)t^(5/2) - 6t^(1/2) + 16.

b. The position function is: s = (4/35)t^(7/2) - 8t^(3/2) + 16t - 12.

a. To find the velocity, we need to integrate the acceleration function. We get:

v = ds/dt = ∫a dt = ∫(15√t - 3/t^(1/2)) dt

Integrating the first term, we get (2/5)t^(5/2), and integrating the second term, we get -6t^(1/2) + C. Thus, the velocity function is:

v = ds/dt = (2/5)t^(5/2) - 6t^(1/2) + C

We can find the constant C using the initial condition that ds/dt = 4 when t = 1. Substituting these values into the equation, we get:

4 = (2/5)(1)^(5/2) - 6(1)^(1/2) + C

C = 4 + 12 = 16

Therefore, the velocity function is:

v = ds/dt = (2/5)t^(5/2) - 6t^(1/2) + 16

b. To find the position function, we need to integrate the velocity function. We get:

s = ∫v dt = ∫((2/5)t^(5/2) - 6t^(1/2) + 16) dt

Integrating the first term, we get (4/35)t^(7/2), integrating the second term, we get -8t^(3/2), and integrating the third term, we get 16t. Thus, the position function is:

s = ∫v dt = (4/35)t^(7/2) - 8t^(3/2) + 16t + C2

We can find the constant C2 using the initial condition that s = 0 when t = 1. Substituting these values into the equation, we get:

0 = (4/35)(1)^(7/2) - 8(1)^(3/2) + 16(1) + C2

C2 = -12

Therefore, the position function is:

s = (4/35)t^(7/2) - 8t^(3/2) + 16t - 12

To learn more about velocity function visit:https://brainly.com/question/28939258

#SPJ11

Answer:

(x + 5)^2 + (y + 5)^2 = 16.

Step-by-step explanation:

(x - a)^2 + (y - b)^2 = r^2    where (a, b) is the centre and r =- the radius.

Here (a, b) = (-5, -5) and r = 4, so:

(x - (-5))^2 + (y - (-5))^2 = 4^2

(x + 5)^2 + (y + 5)^2 = 16

Answer:it would still be a 50/50 chance of it be tails

Step-by-step explanation:

a coin has 2 sides. The probability would be 1/2. That means if you flip it a even amount, there would be a 50/tip chance. Let me know if I’m correct.

Surface area of the box is 304 square inches

Two different methods:

Method 1: Sum of the parts

Method 2: General formula for the Surface Area of a box

Method 1: Sum of the parts

For a box, there are 6 sides, all of which are rectangles:

Each of the above pairs has the same area.

The general formula for the area of a rectangle is [tex]A_{rectangle}=length*width[/tex]

As we look at different rectangles, the length of one rectangle may be considered the "width" of another rectangle, and that's okay as we calculate things separately.  (We'll examine how to calculate everything at once in Method 2).

The area for the front/back side is 8in * 10in = 80 in^2

[tex]A_{front}=A_{back}=80~in^2[/tex]

The area for the left/right side is 4in * 8in = 32 in^2

[tex]A_{left}=A_{right}=32~in^2[/tex]

The area for the top/bottom side is 4in * 10in = 40 in^2

[tex]A_{top}=A_{bottom}=40~in^2[/tex]

So, the total surface area is

[tex]A_{Surface~Area} = A_{front} + A_{back} + A_{left} + A_{right} + A_{top} + A_{bottom}[/tex]

[tex]A_{Surface~Area} = (80in^2) + (80in^2) + (32in^2) + (32in^2) + (40in^2) + (40in^2)[/tex]

[tex]A_{Surface~Area} = 304~in^2[/tex]

Method 2: General formula for the Surface Area of a box

There is a formula for the surface area of a box:[tex]A_{Surface~Area~of~a~box} = 2(length*width + width*height + height*length)[/tex]

This formula calculates the area of one of each of the matching sides from the side pairs discussed in Method 1, adds those areas together (giving 3 of the sides), and doubles the result (bringing in the area for the matching missing 3 sides).

For clarity, let's decide that the "10 in" is the width, the "8 in" is the height, and the left over "4 in" is the length.

[tex]A_{Surface~Area~of~the~box} = 2((4in)(10in) + (10in)(8in) + (8in)(4in))[/tex]

[tex]A_{Surface~Area~of~the~box} = 2(40in^2 + 80in^2 + 32in^2)[/tex]

[tex]A_{Surface~Area~of~the~box} = 2(152in^2)[/tex]

[tex]A_{Surface~Area~of~the~box} = 304in^2[/tex]

Evaluation of S12(x3 – 2x)dx is- 92.875

We can use the definition of the Riemann Sum to evaluate S12(x3 – 2x)dx as follows:

First, we need to choose the width of our intervals.

Let's choose Δx = 1/2, which means we will have 24 subintervals.
Now, we can use the formula for the Riemann Sum to calculate the sum of the areas of the rectangles.
S12(x3 – 2x)dx ≈ ∑[f(xi)Δx] from i=1 to i=24
where xi is the right endpoint of the ith subinterval,

f(xi) = x[tex]i^3[/tex] – 2xi is the height of the rectangle, and Δx = 1/2 is the width of the rectangle.
Evaluating this sum using the given formula, we get:
S12(x3 – 2x)dx ≈ [f(1/2) + f(1) + f(3/2) + ... + f(11)](1/2)
≈ [[tex](1/2)^3[/tex] – 2(1/2) + (1)^3 – 2(1) + (3/2[tex])^3[/tex] – 2(3/2) + ... + (11[tex])^3[/tex] – 2(11)](1/2)
≈ [- 2361/16](1/2)
≈ - 92.875
4) we can simply evaluate the given integral:
S2x2+x=2 = ∫(2[tex]x^2[/tex] + x)dx from 0 to 2
= [[tex]2/3 x^3 + 1/2 x^2[/tex]] from 0 to 2
= [[tex]2/3 (2)^3 + 1/2 (2)^2[/tex]] - [[tex]2/3 (0)^3 + 1/2 (0)^2[/tex]]
= 16/3
5), we can use the following formulas

to find the displacement and distance traveled by the particle over the given time interval:
Displacement = ∫v(t)dt from 1 to 5
Distance traveled = ∫|v(t)|dt from 1 to 5
where v(t) is the velocity function.
a) To find the displacement, we evaluate the integral:
∫v(t)dt = ∫(8 – 2t)dt from 1 to 5
= [8t – t^2] from 1 to 5
= [[tex]8(5) – (5)^2[/tex]] - [8(1) – [tex](1)^2[/tex]]
= 18 meters
b) To find the distance traveled, we evaluate the integral:
∫|v(t)|dt = ∫|8 – 2t|dt from 1 to 5
= ∫(8 – 2t)dt from 1 to 4 + ∫(2t – 8)dt from 4 to 5
= [8t – [tex]t^2[/tex]] from 1 to 4 + [-t^2 + 8t -16] from 4 to 5
= [8(4) – [tex](4)^2[/tex]] - [8(1) – [tex](1)^2[/tex]] + [[tex]-(5)^2[/tex] + 8(5) -16 -(-[tex](4)^2[/tex] + 8(4) -16)]
= 26 meters

To know more about Riemann Sum:

https://brainly.com/question/30404402

#SPJ11

Answer: C Distribution is symmetric

Step-by-step explanation:

Answer:

for that first u should know that how much litres of water that aquarium can contain.

for that first u should know that how much litres of water that aquarium can contain.so that probably depends upon the size length and width of a container

for that first u should know that how much litres of water that aquarium can contain.so that probably depends upon the size length and width of a containera normal container can be filled with approximately 15 containers

The number written as a percentage is:

772.5666118%

To do this, just multiply the number by 100%.

For example, for any number A, the percentage form of A is:

p = A*100%

Here the number is  7.725666118, then the percentage form of this number will be:

N =  7.725666118*100% = 772.5666118%

That is the number as a percentage.

Learn more about percentages at:

https://brainly.com/question/843074

#SPJ1

Answer:Go to the 6 number on the bottom line.Then go up until you reach 2

Step-by-step explanation:
|      
|
|
|
|        .  
|______

Should look like that-ish

Answer:

Step-by-step explanation:

Put the point to the right 6 times and up two times

The correct number of beads is; 4 black, 8 red, and 4 blue. Option A

A molecular model is a depiction of molecules or chemical compounds made physically, visually, or mathematically in order to comprehend their behavior and characteristics. These models can range from real models made of plastic or metal to computer-generated graphics or mathematical formulae, and they can be straightforward or sophisticated.

There are four carbon atoms, eight hydrogen atoms and four oxygen atoms.

Learn more about molecular model:https://brainly.com/question/30545244

#SPJ1

We can  draw at the 5% significance level, the p-value is 0.02. we reject h0 at the 5% significance level because the p-value 0.02 is less than 0.05. The correct answer is a.

To find the p-value, we need to find the area to the right of t = 2.15 under the t-distribution curve with 24 degrees of freedom (df = n - 1 = 25 - 1 = 24). Using a t-table or a calculator, we find that the area to the right of t = 2.15 is approximately 0.02.

Since the p-value (0.02) is less than the significance level (0.05), we reject the null hypothesis H0: μ = 8 and conclude that there is sufficient evidence to support the alternative hypothesis Ha: μ > 8 at the 5% significance level. This means that we can say with 95% confidence that the true population mean is greater than 8.

Therefore the correct answer is a.

To know more about p-value , refer here :

https://brainly.com/question/30182084#

#SPJ11

Lana would pick a non-striped marble about 294 times.

The probability of picking a marble that is not striped is 100% - 8% = 92% = 0.92. This means that for each pick, the probability of getting a non-striped marble is 0.92.

If Lana picks a marble and replaces it 320 times, the number of times she would pick a non-striped marble can be predicted by multiplying the probability of getting a non-striped marble by the number of picks.

So, the number of times she would pick a non-striped marble is:

0.92 x 320 = 294.4

Rounding to the nearest whole number = 294.

To learn more about marble here:

https://brainly.com/question/16918319

#SPJ1

A student would expect to pay approximately $7,096.47 for room and board in 2017. Rounded to the nearest hundredth, this is $7,096.47 rounded to $7,096.50.

What is Function ?

In mathematics, a function is a rule that assigns each element in a set (the domain) to a unique element in another set (the range). The domain and range can be any sets, but they are typically sets of real numbers.

The cost of room and board after t years since 2000 can be modeled by the equation:

C(t) = 4291[tex](1 + 0.031)^{t}[/tex]

where C(t) is the cost after t years.

To find out how much a student would expect to pay in 2017, we need to plug in t = 17 (since 2017 is 17 years after 2000) into the equation:

C(17) = 4291[tex](1 + 0.031)^{17}[/tex]

≈ 7,096.47

Therefore, a student would expect to pay approximately $7,096.47 for room and board in 2017. Rounded to the nearest hundredth, this is $7,096.47 rounded to $7,096.50.

To learn more about Function from given link.

https://brainly.com/question/29120892

#SPJ1

The volume of a hemisphere with a radius of 8. 8 cm, rounded to the nearest tenth of a cubic centimeter, is approximately 1436.8 cubic centimeters.

To find the volume of a hemisphere with a radius of 8.8 cm, you can use the formula:

Volume = (2/3)πr³

where r is the radius of the hemisphere. Plugging in the given radius:

Volume = (2/3)π(8.8)³ ≈ 1436.8 cubic centimeters

So, the volume of the hemisphere is approximately 1436.8 cubic centimeters, rounded to the nearest tenth of a cubic centimeter.

More on volume: https://brainly.com/question/29275358

#SPJ11

The latter expression gives a positive result of $36.90, which means that a bouquet of daisies is $36.90 more expensive than a bouquet of tulips.

The given table shows the prices for various amounts and kinds of bouquets sold by a florist. The prices depend on the number and type of flowers in the bouquet. The table shows prices for bouquets of 2 flowers with daisies, tulips, and roses.

The expression (23.90 - 2) - (60.80 – 2) represents that a bouquet of daisies is $18.45 more expensive than a bouquet of tulips. This is because the cost of a 2-flower bouquet of daisies is $23.90 and the cost of a 2-flower bouquet of tulips is $60.80, so the difference between them is $36.90.

However, we subtract 2 from each price to get the price of the actual flowers in the bouquet, which are the same for both daisies and tulips. Therefore, we get the difference of $18.45.

Similarly, the expression (60.80 - 2) - (23.90 + 2) represents that a bouquet of tulips is $18.45 more expensive than a bouquet of daisies. Here, we subtract the price of a 2-flower bouquet of daisies plus the cost of 2 flowers from the price of a 2-flower bouquet of tulips.

Again, the actual cost of flowers in both bouquets is the same, so we get the difference of $18.45.

The expressions 23.90 - 60.80 and 60.80 - 23.90 represent the price difference between bouquets of daisies and tulips, respectively. The former expression gives a negative result of $36.90, which means that a bouquet of tulips is $36.90 more expensive than a bouquet of daisies.

The latter expression gives a positive result of $36.90, which means that a bouquet of daisies is $36.90 more expensive than a bouquet of tulips.

To learn more about florist, refer below:

https://brainly.com/question/31035470

#SPJ11

The length of UX (the length of a tangent segment to a circle) is approximately 4.9 inches.

To find the length of UX, we can use the formula for the length of a tangent segment to a circle:

Length of tangent segment = √(radius² - distance from center²)

In this case, we don't know the radius or the distance from the center, but we can use the fact that RU is perpendicular to UT to find them:

RU = RS + ST = 8 + 4 = 12 in.
UT = radius = RU/2 = 12/2 = 6 in.

Now we can plug these values into the formula:

Length of tangent segment = √(6² - 4²) ≈ 4.9 in.

Therefore, the length of UX is approximately 4.9 inches.

To learn more about tangent segment to a circle go to :

https://brainly.com/question/3357750?referrer=searchResults

#SPJ11

The new volume of the inflatable ball after the radius becomes half of the original one is 16π.

The original volume of the ball is given as 96π

The radius then becomes half of its original size which means if the radius of the ball is 'r' then the new radius becomes 'r/2'.

The formula for the volume of the ball is equal to, where 'r' is the radius of the ball. (4/3)π X r³

With this the original volume of the ball is

(4/3)π X r³

and the new volume of the ball after it's halved is

V₂ = (4/3)π X (r/2)³

After simplification

V₂ = (4/3)π X (r³/8)

The new volume of the ball is:

V₂ = (1/6) X πr³

So the new volume is (1/6) of the original volume. We can calculate this as

V₂ = (1/6) X 96π

= 16π

Therefore, the new volume of the inflatable ball is 16π.

To learn more about Volume visit

brainly.com/question/29504549

#SPJ4

Answer:

There are 16 total outcomes for tossing 4 quarters

This is because each coin flip has 2 possibilities, so if you flip the coin 4 times it will equal

2x2x2x2.

Therefore, the volume of the composite figure is approximately 419.05 cubic cm.

Volume is the amount of space occupied by a three-dimensional object or shape. It is measured in cubic units such as cubic centimeters, cubic inches, or cubic meters. The volume of an object can be calculated by multiplying the area of its base by its height, or by using specific formulas depending on the shape of the object. The volume of an object is an important parameter in many areas of science and engineering, such as physics, chemistry, fluid mechanics, and material science, as it allows us to determine how much space an object will occupy or how much material is needed to fill a container or build a structure.

Here,

The composite figure consists of a cylinder and two cones, so we need to find the volume of each of these shapes and add them together.

Volume of cylinder = πr²h

= π(4²)(5)

= 80π cubic cm

Volume of one cone = (1/3)πr²h

= (1/3)π(4²)(5)

= (1/3)(80π)

= 26.67π cubic cm

Volume of both cones = 2(26.67π)

= 53.34π cubic cm

Total volume of composite figure = Volume of cylinder + Volume of both cones

= 80π + 53.34π

= 133.34π

= 419.05 cubic cm (rounded to two decimal places)

To know more about volume,

https://brainly.com/question/28338582

#SPJ1

The number of customers surveyed were 15 customers.

The  greatest number of items purchased by a customer was 11 items.

The customers purchased 9 items is 2 customers.

The customers purchased at least 5 items was 7 customers.

The median number of items purchased was 3.

How many customers were surveyed?

1 (0 items) + 1 (1 item) + 2 (2 items) + 4 (3 items) + 0 (4 items) + 2 (5 items) + 0 (6 items) + 2 (7 items) + 0 (8 items) + 2 (9 items) + 0 (10 items) + 1 (11 items) = 15 customers

The greatest number of items purchased by a customer is 11 items. 2 customers purchased 9 items.

How many customers purchased at least 5 items?

2 (5 items) + 0 (6 items) + 2 (7 items) + 0 (8 items) + 2 (9 items) + 0 (10 items) + 1 (11 items) = 7 customers

To find the median, we need to find the middle value of the data. Since there are 15 customers, the median will be the 8th value when the data is ordered.

0, 1, 2, 2, 3, 3, 3, 3, 5, 5, 7, 7, 9, 9, 11

The median number of items purchased is 3.

Find out more on line plots at https://brainly.com/question/27246403

#SPJ1

Answer:5

Step-by-step explanation: The median of the lower quartile is 23 and the median of the upper quartile is 28. 28-23=5. The IQR is 5.

5.58g of catalyst is required for 900g of reactants.

If 500g of reactants require 3.1g of catalyst, then for 900g of reactants, we can use the following proportion:

500g reactants / 3.1g catalyst = 900g reactants / x

Where x is the amount of catalyst required for 900g of reactants.

To solve for x, we can cross-multiply:

500g reactants * x = 3.1g catalyst * 900g reactants

Then, we can divide both sides by 500g reactants to isolate x:

x = (3.1g catalyst * 900g reactants) / 500g reactants

Simplifying this expression gives:

x = 5.58g catalyst

Therefore, 5.58g of catalyst is required for 900g of reactants.

Learn more about catalyst

brainly.com/question/24430084

#SPJ11

The probability of the captain hitting a home run in his next two at-bats is 1/36, and the best simulations to model the situation are using a six-sided number cube or a random number generator between 1 and 60.

Determine the probability that the captain will hit a home run in his next two at-bats and find the best simulation to model the situation.
The probability of the captain hitting a home run in one at-bat is 1/6. To find the probability of hitting a home run in two consecutive at-bats, you can multiply the individual probabilities:

Probability = (1/6) * (1/6) = 1/36

Now let's evaluate the provided simulations:

1. Using a six-sided number cube: Yes, this can be used to model the situation because the probability of hitting a home run (1/6) and not hitting a home run (5/6) can be represented accurately by the numbers 1 and 2-6, respectively.
2. Using a three-sided number cube: No, this cannot be used to model the situation because the probability distribution is not accurately represented with only three sides.
3. Using a coin flip: No, this cannot be used to model the situation because the probability distribution is not accurately represented with only two outcomes (heads and tails).
4. Using a random number generator between 1 and 60: Yes, this can be used to model the situation because the probability of hitting a home run (1/6) and not hitting a home run (5/6) can be represented accurately by the numbers 1-10 and 11-60, respectively.

Learn more about random numbers: https://brainly.com/question/29609783

#SPJ11

Answer:

38/93

Step-by-step explanation:

11/31 x 38/33

11 x 38 = 418

31 x 33 = 1023

= 418/1023

Simplifying

The simplified form of 418/1023 is 38/93.

38/93 is your final answer.

They may choose to bring 4 chaperones or even more depending on their preferences and logistical constraints.

For the camping trip with 15 scouts, they will need at least 15/5 = 3 chaperones.

However, it's possible that they may want to have more than the minimum number of chaperones for additional supervision and safety. The number of chaperones they choose to bring may also depend on the ratio of chaperones to scouts that they want to maintain.

So, they may choose to bring 4 chaperones (1 chaperone for every 3.75 scouts), 5 chaperones (1 chaperone for every 3 scouts), or even more depending on their preferences and logistical constraints.

Learn more about logistical constraints

brainly.com/question/25380728

#SPJ11

Answer:

To estimate the positive solution to the equation x⁴ – x = 3 using Newton's Method, we can start by taking the derivative of the equation, which is 4x³ - 1. Then we can use the formula X1 = X0 - f(X0) / f'(X0), where X0 = 1, f(X0) = 1⁴ - 1 - 3 = -3, and f'(X0) = 4(1)³ - 1 = 3. Plugging these values into the formula, we get:

X1 = 1 - (-3) / 3

X1 = 2

Now we can repeat the process using X1 as our new X0:

X2 = X1 - f(X1) / f'(X1)

X2 = 2 - (2⁴ - 2 - 3) / (4(2)³ - 1)

X2 ≈ 1.7708

Therefore, the positive solution to the equation x⁴ – x = 3, rounded to four decimal places, is approximately 1.7708.

Step-by-step explanation:

The positive solution to the equation x⁴ – x = 3, estimated using Newton's Method with x₀ = 1 and x₂ as the final estimate, is approximately 1.5329, rounded to four decimal places.

To use Newton's Method to estimate the positive solution to the equation x⁴ – x = 3, we need to find the derivative of the function f(x) = x⁴ – x. This is given by:

f'(x) = 4x³ - 1

We can then use the formula for Newton's Method:

x(n+1) = x(n) - f(x(n)) / f'(x(n))

where x(n) is the nth estimate of the solution.

Starting with x₀ = 1, we can plug this into the formula to get:

x₁ = 1 - (1^4 - 1 - 3) / (4(1^3) - 1) ≈ 1.75

We can then repeat this process using x₁ as the new estimate, to get:

x₂ = 1.75 - (1.75^4 - 1.75 - 3) / (4(1.75^3) - 1) ≈ 1.5329

To learn more about equation click on,

https://brainly.com/question/31422806

#SPJ4

The first five terms of the sequence  are: 3/5, 3/4, 9/7, 3/2, 15/9.

To find the first five terms of the sequence  aₙ = 3n/(n+4)

we need to substitute the values of n from 1 to 5 and solve for .

a₁ = 3×1/(1+4) = 3/5

a₂ = 3×2/(2+4) = 3/4

a₃ = 3×3/(3+4) = 9/7

a₄ = 3×4/(4+4) = 12/8 = 3/2

a₅ = 3×5/(5+4) = 15/9

Hence, the first five terms of the sequence  are: 3/5, 3/4, 9/7, 3/2, 15/9.

To learn more on Sequence click:

https://brainly.com/question/21961097

#SPJ1

a) The mean is the midpoint of the distribution, the percentage of homes with a price greater than the mean is 19.7%.

b) The percentage of homes on the market for more than the mean number of days is 72.1%.

a) Firstly, the mean selling price of homes is $357.0 thousand, with a standard deviation of $160.7 thousand. To estimate the percentage of homes selling for more than $500.0 thousand, we can use the normal distribution. This assumes that the distribution of home prices is approximately normal. Using the standard normal distribution table, we can find the z-score for a price of $500.0 thousand.

z = (500.0 - 357.0) / 160.7 = 0.88

Using the z-score, we find that the percentage of homes selling for more than $500.0 thousand is approximately 19.7%.

b) Moving on to the days a home spends on the market, the mean is 30 days and the standard deviation is 10 days. To estimate the number of homes on the market for more than 24 days, we can again use the normal distribution. Assuming that the distribution of days on the market is approximately normal, we can find the z-score for 24 days as:

z = (24 - 30) / 10 = -0.6

Using the z-score, we find that the percentage of homes on the market for more than 24 days is approximately 72.1%.

To know more about distribution here

https://brainly.com/question/29509087

#SPJ4

Answer:

Step-by-step explanation:

We can use trigonometry to solve this problem. Let's call the distance from the base of the plateau to our position "x". We can then use the tangent function to find x:

tan(20°) = opposite / adjacent

In this case, the opposite side is the height of the plateau (50 m) and the adjacent side is x. So we can write:

tan(20°) = 50 / x

To solve for x, we can rearrange this equation:

x = 50 / tan(20°)

Using a calculator, we get:

x = 143.45 meters (rounded to two decimal places)

Therefore, if the angle of elevation to the top of the plateau is 20 degrees, and the plateau is 50 meters high, we are approximately 143.45 meters away from the base of the plateau.

Answer:

The distance is 137.3739 feet.

Step-by-step explanation:

I hope this answer is right.