The gas sample's total volume is 22.4 liters at STP. The gas sample is made up of 50 percent nitrogen and 50 percent oxygen (by volume). The composition of a 50% nitrogen/50% oxygen gas sample that has a total volume of 22.4 liters at STP is: 50 percent nitrogen (N2)50 percent oxygen (O2)N2 is nitrogen's chemical formula, and O2 is oxygen's chemical formula. So the answer is: 50% nitrogen and 50% oxygen by volume, with a total volume of 22.4 liters at STP.
This gas sample has a composition of two non-reactive gases that are widely utilized in various industries as raw materials. Nitrogen is used in welding, food packaging, and cryogenics, while oxygen is used in gas welding, medical therapy, and space applications.
Therefore the gas sample is composed of 50% nitrogen and 50% oxygen by volume, with a total volume of 22.4 liters at STP.
For more questions on: oxygen
https://brainly.com/question/28009615
#SPJ11
roughly how much organic carbon (g c m-2 yr-1) is available each year for consumption by herbivores, decomposers, or for harvest?
A total of 1,000 to 100,000 million metric tons of carbon are thought to pass annually through the biological route. Around 65,500 billion billion metric tonnes of the Earth's carbon are trapped in rocks.
In the slow carbon cycle, carbon moves through rocks, soil, oceans, and the atmosphere over a period of 100–200 million years through a series of chemical reactions and tectonic activity. The annual average for the slow carbon cycle is [tex]10^{13}[/tex] to [tex]10^{14}[/tex] grammes (10100 million metric tons) of carbon. In contrast, the rapid carbon cycle transfers [tex]10^{16}[/tex] to [tex]10^{17}[/tex] grammes of carbon every year, but human emissions of carbon to the atmosphere are on the order of 1015 grammes.
Learn more about carbon here:
https://brainly.com/question/20319911
#SPJ4
a trial run takes 42 seconds for the blue color to appear. the rate of reaction for this trial will be
The rate of reaction is 0.001 M/s. The answer is option e.
The rate of a reaction refers to the change in concentration of reactants or products per unit time. It is typically expressed in units of M/s, where M refers to the molarity of the solution (moles of solute per liter of solution). The rate constant (k) for a first-order reaction can be calculated using the half-life equation t1/2 = ln(2)/k.
In this case, t1/2 = 100 seconds, so k = ln(2)/t1/2 = 0.0069 s^-1.
The rate of reaction can be calculated using the first-order rate law, rate = k[A], where [A] is the concentration of the reactant.
Substituting the value, we get
rate = 0.0069 x 0.01 = 0.000069 M/s,
which is approximately equal to 0.001 M/s. Therefore, the answer is option e.
To know more about reaction, here
brainly.com/question/5102843
#SPJ4
--The complete question is. What is the rate of the reaction in M/s for Experiment 3, given that the concentration of one of the reactants or products is 0.01 M and the reaction follows first-order kinetics? The time it takes for the reaction to reach half completion is 100 seconds. The options provided are 0.22, 0.11, 0.005, 0.01, and 0.001 M/s.--
Many movies show people tapping SOS on water pipes to get help. Why is tapping on water pipes a quicker way of passing on a message than yelling?
(Use science terminology)
Tapping on water pipes is a quicker way of passing on a message than yelling because of the difference in the speed of sound in water compared to air.
What is sound?
Sound travels faster in water than in air, with a speed of approximately 1,500 meters per second in water and 340 meters per second in air. When someone taps on a water pipe, the vibrations travel through the water faster than if they were to yell or shout. These vibrations can be detected by someone listening with their ear or using specialized equipment, allowing for the SOS message to be transmitted over a greater distance and more quickly than if the message were shouted. This phenomenon is due to the fact that water molecules are more tightly packed than air molecules, allowing sound waves to travel more efficiently through water.
To know more about sound, visit:
https://brainly.com/question/15381147
#SPJ1
Complete question is: Many movies show people tapping SOS on water pipes to get help. Tapping on water pipes is a quicker way of passing on a message than yelling because of the difference in the speed of sound in water compared to air.
a container with volume 71.9 ml contains water vapor at a pressure of 10.4 atm and a temperature of 465oc. how many grams of the gas are in the container?
The mass of the gas is 4.777 gram in the container with volume 71.9 ml contains water vapor at a pressure of 10.4 atm. and a temperature of 465 degree centigrade. This is calculated using ideal gas equation.
Volume of the water vapor = 71.9 ml = 0.0719L
Pressure of the water vapor = 10.4 atm.
Temperature of the water vapor = 465 degree C = 738 K
We can calculate the number of moles of water vapor by using the ideal gas equation.
PV = n RT
10.4 atm. * 0.0719L = n * 8.314 J/ mole· K * 10.4 atm.
n = 10.4 atm. * 0.0719L / 8.314 J/ mole· K * 10.4 atm.
= 0.0086 mole
We know that the number of moles is equals to,
Number of moles = mass / molar mass
= 0.0086 mole / 18 g/mole
= 4.777 g
To learn more about ideal gas equation
https://brainly.com/question/27870704
#SPJ4
what is the ph of a solution of 0.482 m ethylammonium chloride, c2h5nh3cl? the kb of ethylamine, c2h5nh2, is 4.3 x 10-4.
The pH of the solution of 0.482 m ethylammonium chloride is 1.96.
When dissolved in water, it dissociates into its ions,
C₂H₅NH₃Cl → C₂H₅NH₃⁺ + Cl⁻
The C₂H₅NH₃⁺ ion can react with water to form C₂H₅NH₂ and H₃O⁺ ions:
C₂H₅NH₃⁺ + H₂O ⇌ C₂H₅NH₂ + H₃O⁺
The equilibrium constant for this reaction is Kb, the base dissociation constant for ethylamine, which is given as 4.3 x 10^-4. We can use this value to calculate the concentration of hydroxide ions in the solution.
First, we need to calculate the initial concentration of ethylammonium ion, which is equal to the concentration of ethylammonium chloride because the salt dissociates completely in water:
[C₂H₅NH₃⁺] = 0.482 M
The initial concentration of hydroxide ions is negligible, so we can assume that it is zero. At equilibrium, the concentration of ethylammonium ion will decrease by x, and the concentrations of ethylamine and H₃O⁺ ions will both increase by x. Therefore, we can write the equilibrium concentrations as:
[C₂H₅NH₃⁺] = 0.482 - x
[C₂H₅NH₂] = x
[H₃O⁺] = x
Using the expression for Kb,
Kb = [C₂H₅NH₂][H₃O⁺]/[C₂H₅NH₃⁺]
Substituting in the equilibrium concentrations and the value of Kb,
4.3 x 10^-4 = x^2 / (0.482 - x)
Since x is much smaller than 0.482, we can assume that 0.482 - x ≈ 0.482. Solving for x,
x = sqrt(Kb[C₂H₅NH₃⁺]) = sqrt((4.3 x 10^-4)(0.482)) = 0.011
Therefore, the concentration of H₃O⁺ ions is [H₃O⁺] = 0.011 M. Using the expression for pH, we can calculate the pH of the solution,
pH = -log[H₃O⁺] = -log(0.011) = 1.96
To know more about ph, here
brainly.com/question/10697195
#SPJ4
which of the following statements about simple distillation is not correct? select the correct answer below: the distillate is heated in the still pot. the receiving flask is not heated. the still head is immediately above the still pot in the distillation apparatus. vapor condenses into the still receiver.
The incorrect statement about simple distillation is: "the distillate is heated in the still pot." In fact, it is the mixture that is heated in the still pot, not the distillate. Simple distillation is a process used to separate components of a mixture with different boiling points.
In the distillation apparatus, the still pot contains the mixture to be separated. When this mixture is heated, components with lower boiling points evaporate first. The vapors then rise and pass through the still head, which is immediately above the still pot.
The receiving flask, on the other hand, remains unheated. Its purpose is to collect the condensed liquid, known as the distillate. As the vapors cool down, they condense and drip into the still receiver, which is connected to the still head.
Vapor condensation in the still receiver allows the separated component to be collected in its pure form, while other components with higher boiling points remain in the still pot.
In summary, simple distillation involves heating a mixture in the still pot, allowing the vapors to rise through the still head, and condensing the vapors in the still receiver to collect the distillate. The incorrect statement is that the distillate is heated in the still pot, as it is actually the mixture that is heated.
Know more about simple distillation here :
brainly.com/question/24553469
#SPJ11
consider the possible acid-base reactions and answer the following question: which buffer will have the greatest capacity resistance to changes in ph upon the addition of limited amounts of bases? group of answer choices 1.287m nac2h3o2 and 0.487m hc2h3o2 0.287m nac2h3o2 and 0.387m hc2h3o2 0.687m nac2h3o2 and 0.987m hc2h3o2 they have the same capacity 0.987m nac2h3o2 and 1.287m hc2h3o2 0.987m nac2h3o2 and 0.387m hc2h3o2
This means that a buffer solution can resist changes in pH caused by small amounts of added acid or base.
When answering questions on Brainly, a question-answering bot should always be factually accurate, professional, and friendly. Additionally, it should be concise and not provide extraneous amounts of detail.
Typos or irrelevant parts of the question should not be ignored, and the bot should use the terms specified in the question when answering.
Considering the possible acid-base reactions, the buffer that will have the greatest capacity resistance to changes in pH upon the addition of limited amounts of bases is 0.987M NaC2H3O2 and 1.287M HC2H3O2.
This is because the buffer with the highest concentration of weak acid and weak base will have the greatest buffer capacity.A buffer solution is a solution that resists changes in pH when small amounts of acid or base are added to it.
A buffer consists of a weak acid and its conjugate base or a weak base and its conjugate acid. These buffer solutions work by reacting with any added acid or base to form an equilibrium that minimizes the change in pH.
To learn more about : acid
https://brainly.com/question/25148363
#SPJ11
calculate the solubility product constant, ksp for copper (i) chloride given that the solubility of this compound at 25c is 1.08 x 10^-2 g cucl in 100. g of water
The solubility product constant, ksp for copper (i) chloride given that the solubility of this compound at 25c is 1.08 x 10⁻²g cucl in 100. g of water is equals to the CuCl is 1.16 × 10⁻⁴.
The solubility product of a compound is calculated by the product of the powers of the concentration of ions of the corresponding compounds. When a compound is dissolved in any solvent, then one common ion should be present in the solvent and that compound. We have, Solubility of compound in CuCl
= 1.08 × 10⁻² g
temperature, t = 25°C
quantity of water = 100g
Solubility product constant formula, Ksp = [products]/[reactants]
The ksp for copper (i) chloride in CuCl
= s² = ( 1.08 × 10⁻² )²
= 1.16 × 10⁻⁴
Hence, required constant value is 1.16 × 10⁻⁴.
For more information about solubility product constant, visit :
https://brainly.com/question/9807304
#SPJ4
A proton is trapped in a circular motion in a 0.725-T magnetic field,as shown. The radius of the circle is 5.10 cm. Dojon (a) Calculate the speed of the proton: In what direction is it moving in the circle clockwise or counterclockwise? (b) At the instant the proton is at the illustrated position an electric field is turned on that makes the proton continue straight line path, with the same spced and along the direction had at that instant: Calculate how strong and in what direction, is the electric field needed to do this: Clearly explain vour reasoning:
The speed of proton is [tex]2.99 x 10^5 m/s[/tex]. The direction of the electric field should be perpendicular to both the magnetic field and the velocity vector of the proton.
(a) To calculate the speed of the proton, we can use the formula:
v = (q x r x B) / m
where v is the speed, q is the charge of the proton[tex](1.6 x 10^-19 C)[/tex], r is the radius (0.051 m), B is the magnetic field (0.725 T), and m is the mass of the proton [tex](1.67 x 10^-27 kg)[/tex].
[tex]v = (1.6 x 10^-19 C * 0.051 m * 0.725 T) / (1.67 x 10^-27 kg)[/tex]
[tex]v ≈ 2.99 x 10^5 m/s[/tex]
The direction of the proton's movement depends on the orientation of the magnetic field. If the magnetic field is pointing into the page, the proton will move counterclockwise; if the magnetic field is pointing out of the page, the proton will move clockwise.
(b) To make the proton continue in a straight line path, we need an electric field that will balance the magnetic force. The force due to the electric field can be found using:
F = q x E
The force due to the magnetic field can be found using:
F = q x v x B
Since these forces must be equal, we can set them equal to each other:
q x E = q x v x B
E = v x B
[tex]E = 2.99 x 10^5 m/s × 0.725 T[/tex]
[tex]E ≈ 2.17 x 10^5 N/C[/tex]
The direction of the electric field should be perpendicular to both the magnetic field and the velocity vector of the proton. If the magnetic field is pointing into the page, the electric field should point downward; if the magnetic field is pointing out of the page, the electric field should point upward.
To know more about proton refer to-
brainly.com/question/1252435#
#SPJ11
do you expect keq to vary with increasing initial reactant concentration? group of answer choices yes, keq will increase with an increase in initial reactant concentrations yes, keq will decrease with an increase in initial reactant concentrations no, keq will not vary with initial reactant concentrations the answer depends on the reaaction
Equilibrium constant will not vary with initial concentration. The value of equilibrium constant depends on temperature and the enthalpy of the reaction. So the correct option from the following is option (c).
The equilibrium constant for a reversible chemical reaction is defined as the ratio of the concentrations when chemical equilibrium is reached and expresses the extent to which equilibrium of the reaction. It is the value of the reaction quotient of the chemical reaction at chemical equilibrium which signifies a state approached by a dynamic chemical system after the certain time has elapsed at which the composition of the reaction has no predictable tendency towards further change. The equilibrium concentrations of reactants and products of the chemical reaction depends on the initial concentrations but the value of Keq does not depends on it.
To learn more about Equilibrium constant
https://brainly.com/question/3159758
#SPJ4
The complete question is,
Do you expect Keq to vary with increasing initial reactant concentration?
Group of answer choices
A. Yes, Keq will increase with an increase in initial reactant concentrations
B. Yes, Keq will decrease with an increase in initial reactant concentrations
C. No, Keq will not vary with initial reactant concentrations
D. The answer depends on the reaction
Please help!!!! Classify the following substances as electrolytes or non electrolytes:
Pure water, tap water, sugar solution, sodium chloride solution, hydrochloric acid solution, lactic acid solution, ethyl alcohol solution, pure sodium chloride
Answer:
Pure water: electrolyte (poor)
Tap water: electrolyte (small amount)
Sugar solution: nonelectrolyte
Sodium chloride solution: electrolyte
Hydrochloric acid solution: electrolyte
Lactic acid solution: electrolyte.
Ethyl alcohol solution: nonelectrolyte
Pure sodium chloride: strong electrolyte
Explanation:
Electrolytes are part of a solution that conduct electricity, while nonelectrolytes do not conduct electricity in a solution.
discuss the relative importance of various mechanical and chemical factors in producing respiratory variations.
Respiratory variations can be influenced by a variety of mechanical and chemical factors. Mechanical factors include changes in lung volume and airway resistance, while chemical factors include changes in blood oxygen and carbon dioxide levels. The relative importance of these factors in producing respiratory variations can depend on a variety of factors, including the individual's health status, level of physical activity, and environmental conditions.
In healthy individuals, mechanical factors such as changes in lung volume and airway resistance play a primary role in producing respiratory variations. For example, during exercise or physical activity, increased demand for oxygen can lead to deeper and more frequent breaths as the lungs work harder to supply oxygen to the body. Conversely, during periods of relaxation or sleep, respiratory rate and volume decrease as the body's oxygen demand decreases.
Chemical factors can also play a significant role in producing respiratory variations. Changes in blood oxygen and carbon dioxide levels can stimulate the respiratory center in the brain, leading to changes in breathing rate and depth. For example, when blood carbon dioxide levels increase, the respiratory center is stimulated, causing an increase in breathing rate and depth to remove excess carbon dioxide from the body.
Overall, while both mechanical and chemical factors can contribute to respiratory variations, the relative importance of these factors can vary depending on the individual and their circumstances. Understanding the interplay between these factors can be important for managing respiratory conditions and promoting respiratory health.
The relative importance of each factor depends on the specific situation and individual conditions. Generally, chemical factors are more important in regulating breathing and maintaining homeostasis, while mechanical factors are essential for the proper functioning of the respiratory system.
The relative importance of mechanical and chemical factors in producing respiratory variations can be discussed by examining their roles in regulating breathing and maintaining homeostasis.
1. Mechanical Factors:- Lung compliance: It refers to the ease with which lungs can be expanded. Higher compliance means the lungs can expand more easily, resulting in a lower breathing effort. Changes in lung compliance can lead to variations in respiratory patterns.
- Airway resistance: The resistance encountered by the airflow in the respiratory tract determines the ease of breathing. Increased airway resistance can lead to respiratory variations, such as difficulty in breathing.
- Chest wall and diaphragm movement: The coordinated contraction and relaxation of the diaphragm and chest wall muscles play a crucial role in breathing. Any abnormalities in these movements can lead to respiratory variations.
- Oxygen levels: Low oxygen levels in the blood (hypoxia) can lead to increased breathing rate and depth to maintain proper oxygen supply to the tissues.
- Carbon dioxide levels: High carbon dioxide levels in the blood (hypercapnia) stimulate chemoreceptors, which in turn increase the breathing rate and depth to eliminate excess [tex]CO_2[/tex] from the body.
- Hydrogen ion concentration (pH): Chemoreceptors also respond to changes in blood pH. Acidosis (low pH) due to high hydrogen ion concentration can increase the breathing rate and depth to eliminate [tex]CO_2[/tex] and restore the pH balance.
To know more about respiratory system
brainly.com/question/22182638
#SPJ11
Explain what happens to a hurricane once it hits land and travels across the land
As the hurricane moves over land, the hurricane is no longer fueled by this moisture. Therefore, the hurricane begins to slow down and die as it moves further inland. Hurricanes usually weaken when they hit land, because they are no longer being fed by the energy from the warm ocean waters.
how many milliliters of cobalt(ii) chloride hexahydrate solution were added to the flask (before dilution)? note: the volume of substances dispensed in the lab may vary. choose the answer that is closest to yours.
The volume of CoCl ₂ needed before dilution is 10.0 mL. Hence, the right answer is 10.0 mL.
As per the given problem; Calculate the volume of 0.100 M CoCl ₂ needed to prepare 100.0 mL of 0.0100 M CoCl ₂ solution.
The molarity of the diluted solution (after adding water) is M2 = 0.0100 M,
the volume of the diluted solution is V2 = 100.0 mL,
and the molarity of the stock solution is M1 = 0.100 M.
The volume of the stock solution needed is given by the equation below:
M1V1 = M2V2⇒V1= M2V2/M1⇒V1
= 0.0100 M x 100.0 mL/0.100 M⇒V1
= 10.0 mL
Therefore, we need 10.0 mL of 0.100 M CoCl ₂ solution to prepare 100.0 mL of 0.0100 M CoCl ₂ solution before dilution. So, the volume of CoCl ₂ needed before dilution is 10.0 mL.
Hence, the right answer is 10.0 mL.
For more such questions on volume
brainly.com/question/13799525
#SPJ11
Stoichiometry
These questions already have the answers I just need the work in the boxes please. You don’t even have to explain it please just set it up for me. I will Venmo 40$ to you aswell.
The image shows a balanced chemical equation:
2H₂(g) + O₂(g) → 2H₂O(g)
How are the electron configurations of elements arranged in the periodic table?The electron configurations of elements are arranged in rows and columns in the periodic table based on their increasing atomic numbers. The rows, called periods, represent the number of electron shells in each element, while the columns, called groups, represent the number of valence electrons.
What is the significance of the atomic number in the periodic table?The atomic number of an element determines its position in the periodic table. Elements with similar chemical properties are arranged in the same group, and the number of valence electrons in the outermost shell of an element corresponds to its position in the periodic table.
Thus, the atomic number provides a way to predict the chemical behavior of an element and its position in the periodic table.
To know more about elements,visit:
https://brainly.com/question/13025901
#SPJ1
olive oil is a liquid , so it contains mostly unsaturated fatty acids. these fatty acids have choose... intermolecular forces and choose... melting points.
Fatty acids are essential components of lipids and play an important role in the structure and function of biological membranes that are related to presence of double bonds in the hydrocarbon chains of unsaturated fatty acids.
Unsaturated fatty acids have weaker intermolecular forces than saturated fatty acids, which means that they have lower melting points. This is because unsaturated fatty acids have one or more double bonds in their hydrocarbon chains, which introduce kinks in the chains and prevent them from packing closely together. As a result, unsaturated fatty acids have more disordered and loosely packed structures, which makes them more prone to breaking apart and melting at lower temperatures compared to saturated fatty acids with stronger intermolecular forces and higher melting points.
Therefore, olive oil, which contains mostly unsaturated fatty acids, has weaker intermolecular forces and lower melting points than a solid fat like butter, which contains mostly saturated fatty acids.
Learn more about Fatty acids here:
brainly.com/question/30712004
#SPJ4
Find the area of the shaded region of the trapezoid. A. 364 sq. units B. 130 sq. units C. 429 sq. units D. 663 sq. units
the area of the shaded region of the trapezoid. is 270 - 45 = 225 sq. units. Thus, the answer is option A which is 225 sq. units.
To find the area of the shaded region in the trapezoid, we need to subtract the area of the smaller triangle from the area of the larger triangle. The height of both triangles is the same, so we only need to find the bases.
The base of the larger triangle is the sum of the bases of the trapezoid, which is 15 + 30 = 45 units. The height of the triangle is 12 units, so the area of the larger triangle is (1/2) x 45 x 12 = 270 sq. units.
To find the base of the smaller triangle, we need to subtract the length of the shorter base of the trapezoid (15 units) from the longer base (30 units) and divide by 2. So, the base of the smaller triangle is (30 - 15)/2 = 7.5 units. The area of the smaller triangle is (1/2) x 7.5 x 12 = 45 sq. units.
Therefore, the area of the shaded region is 270 - 45 = 225 sq. units. Thus, the answer is option A which is 225 sq. units.
The correct question is :Find the area of the shaded region of the trapezoid.
A. 225 sq. units
B. 130 sq. units
C. 429 sq. units
D. 663 sq. units
To know more about trapezoid, visit:
https://brainly.com/question/22227061
#SPJ1
Question :-
How to balance chemical equations?
I need steps
Don't spam from Go0gle
!!!!CLASS 10 CHEMISTRY!!!!
Answer:
the main aim of balance in an equation is making show that the total number of substances on the reactant side is equal to the total number of substances on the product side
Explanation:
so if we were to balance the equation of water water is a compound containing two molecules of hydrogen and one molecule of oxygen therefore
H+O=H2O
[tex]H+O_2= H_2O[/tex]
Element | Reactant | Product
H | 1 × 4 | 2×2
O | 2 | 1 × 2
[tex]4H+O_2= 2H_2O[/tex]
a 10.0 ml of 0.121 m h2so4 is neutralized by 17.1 ml of koh solution. the molarity of the koh solution is . group of answer choices 0.428 m 0.207 m 0.0708 m 0.142 m 0.414 m
A 10.0 ml of 0.121 m [tex]H_2SO_4[/tex] is neutralized by 17.1 ml of [tex]KOH[/tex] solution. The molarity of the [tex]KOH[/tex] solution is: 0.142 M.
The correct answer choice is " 0.142 m "
Balanced equation for the reaction is:
[tex]H_2SO_4[/tex] + 2[tex]KOH[/tex] → [tex]K_2SO_4[/tex]+ 2[tex]H_2O[/tex]
From the balanced equation, we can see that one mole of [tex]H_2SO_4[/tex] reacts with two moles of [tex]KOH[/tex].
Therefore, the number of moles of [tex]KOH[/tex] required to neutralize 10.0 ml of 0.121 M [tex]H_2SO_4[/tex] is:
0.121 moles/L × 10.0 mL × 1 L/1000 mL = 0.00121 moles
Since two moles of [tex]KOH[/tex] are required to react with one mole of [tex]H_2SO_4[/tex] , the number of moles of [tex]KOH[/tex] required is:
0.00121 moles [tex]H_2SO_4[/tex] × 2 moles [tex]KOH[/tex]/1 mole [tex]H_2SO_4[/tex] = 0.00242 moles [tex]KOH[/tex]
The volume of the [tex]KOH[/tex] solution required to supply 0.00242 moles [tex]KOH[/tex] is 17.1 mL.
Therefore, the molarity of the [tex]KOH[/tex] solution is:
0.00242 moles/17.1 mL × 1000 mL/1 L
= 0.142 M
Therefore, the correct answer choice is " 0.142 m "
For more such questions on molarity, click on:
https://brainly.com/question/14469428
#SPJ11
select the sentence that generally is the best style for interesting writing based on what has been covered in the text and the powerpoints. group of answer choices the process was discovered by ace chemists. ace chemists discovered the process. ace chemists were responsible for discovering the process. discovery of this process was made by ace chemists.
"Ace chemists discovered the process" is generally the best style for interesting writing based on what has been covered in the text as well as the power points. Option B is correct.
This sentence uses active voice, which is generally considered more engaging and interesting than passive voice. It is also concise and clear in its message, avoiding unnecessary words like "responsible for" and "was made by".
"Ace chemists" is a phrase that refers to highly skilled or exceptional chemists. The term "ace" is often used informally to describe someone who is excellent or skilled in a particular field or activity. In the context of chemistry, "ace chemists" may refer to chemists who have made significant contributions to the field or who have exceptional skills and knowledge.
Hence, B. is the correct option.
To know more about chemists here
https://brainly.com/question/1674101
#SPJ4
--The given question is incomplete, the complete question is
"Select the sentence that generally is the best style for interesting writing based on what has been covered in the text and the power points. group of answer choices A) the process was discovered by ace chemists. B) ace chemists discovered the process. C) ace chemists were responsible for discovering the process. D) discovery of this process was made by ace chemists."--
What are the differences between Alkane and Alkyl radicals?
Answer:
Alkanes are hydrocarbons with only single bonds between carbon atoms, while alkyl radicals are highly reactive species that contain a single unpaired electron and are formed when an alkane loses a hydrogen atom. Alkyl radicals are therefore not stable on their own and tend to quickly react with other molecules, while alkanes are relatively stable and unreactive.
Explanation:
What does the 1st Law of Thermodynamics say about different forms of energy?
The first law of thermodynamics, also referred to as the law of conservation of energy, states that energy can only be transferred or converted from one form to another and cannot be produced or destroyed.
This implies that the overall level of energy in a confined system doesn't change.
The first law of thermodynamics, also known as the law of conservation of energy, states that energy cannot be created or destroyed, only converted from one form to another.
This indicates that even though energy can change its form, the overall amount in a closed system stays constant. An automobile, for instance, has kinetic energy when it is moving, but when it stops, the brakes of the vehicle transform that kinetic energy into heat energy.
A similar transformation occurs when a light bulb is switched on from electrical energy to light energy.
In conclusion, the first rule of thermodynamics states that although energy can change forms and is always conserved, it cannot be created or destroyed.
learn more about Law of Thermodynamics here
https://brainly.com/question/26035962
#SPJ1
In what way can motion help in our daily lives?
Motion can help us in lot of ways.
Motion ensures that blood flows into our bodies.
It enhances the person's mood, ensures a healthy body, healthier bones and healthier lifestyle.
when the following equation is balanced properly under acidic conditions, what are the coefficients of the species shown? hno3 fe no fe2 water appears in the balanced equation as a fill in the blank 5 (reactant, product, neither) with a coefficient of . (enter 0 for neither.) how many electrons are transferred in this reaction?
Two electrons are transferred in this reaction
When answering questions on the platform Brainly, you should always be factually accurate, professional, and friendly. Additionally, you should be concise and do not provide extraneous amounts of detail. You should not ignore any typos or irrelevant parts of the question.
How to balance the equation HNO3 + Fe --> NO + Fe2+ under acidic conditions?In order to balance the equation HNO3 + Fe --> NO + Fe2+ under acidic conditions, follow the below steps:
First of all, write down the unbalanced equation:
HNO3 + Fe --> NO + Fe2+Add the coefficients to balance the iron atoms:
HNO3 + Fe --> NO + Fe2+Balance the hydrogen atoms by adding H+ ions on the left side:
HNO3 + Fe + H+ --> NO + Fe2+Add the electrons to balance the charges:
HNO3 + Fe + H+ + e- --> NO + Fe2+Now, add the electrons to the other side:
HNO3 + Fe + H+ + e- --> NO + Fe2+ + e-Balance the nitrogen atoms by adding H2O to the right side:
HNO3 + Fe + H+ + e- --> NO + Fe2+ + e- + H2OThe balanced equation is:
HNO3 + Fe + 3H+ + e- --> NO + Fe2+ + 2e- + H2O
What are the coefficients of the species shown in the balanced equation?The coefficients of the species shown in the balanced equation are as follows:
HNO3: 1Fe: 1H+: 3NO: 1Fe2+: 1H2O: 1
How many electrons are transferred in this reaction?
To learn more about : electrons
https://brainly.com/question/26084288
#SPJ11
1. how do you explain the relatively high conductivity of tap water compared to a low or zero conductivity for deionized water? 2. is gatorade a strong or weak electrolyte?
The relatively high conductivity of tap water compared to deionized water is due to the presence of dissolved ions in tap water. The high conductivity of Gatorade is also why it can be used in experiments involving electricity and conductivity.
Tap water contains various dissolved minerals and salts, such as calcium, magnesium, sodium, and chloride ions. These ions carry an electric charge and can conduct electricity, which leads to the relatively high conductivity of tap water. In contrast, deionized water has had all of its ions removed, resulting in a very low conductivity or zero conductivity.
Gatorade is a strong electrolyte. It contains a high concentration of dissolved ions, such as sodium, potassium, chloride, and phosphate ions. These ions dissociate into positive and negative ions in water, which can conduct electricity.
This is why Gatorade is sometimes used to rehydrate athletes during and after intense physical activity, as the electrolytes can help replace those lost through sweat and aid in the body's normal function.
To learn more about conductivity
https://brainly.com/question/7643131
#SPJ4
A chemical reaction occurred when .500g of Calcium hydroxide falls into a 100ml of
8.5M hydroiodic acid.Is this enough calcium hydroxide to completely neutralize the all of the acid?
-How much salt forms in this reaction?
First, we need to determine the number of moles of hydroiodic acid in 100mL of 8.5M solution. Therefore, 1.98 g of calcium iodide forms in the reaction.
8.5 moles/L x 0.100 L = 0.85 moles of hydroiodic acid
Next, we need to determine the number of moles of calcium hydroxide used in the reaction.
0.500 g Ca(OH)2 x (1 mol Ca(OH)2/74.09 g) = 0.00674 moles Ca(OH)2
Since the stoichiometry of the reaction is 1:2 between Ca(OH)2 and HI, we need twice as many moles of hydroiodic acid to completely react with all the Ca(OH)2.
0.00674 moles Ca(OH)2 x 2 = 0.0135 moles HI needed
Since we have 0.85 moles of HI, which is more than enough to react with 0.0135 moles of Ca(OH)2, the reaction is complete.
To determine how much salt (calcium iodide) forms, we need to use the stoichiometry of the reaction, which is:
Ca(OH)2 + 2HI ⇒ CaI2 + 2H2O
Since two moles of hydroiodic acid react with one mole of calcium hydroxide to form one mole of calcium iodide, the amount of salt formed is:
0.00674 moles Ca(OH)2 x (1 mol CaI2/1 mol Ca(OH)2) = 0.00674 moles CaI2
Finally, we can calculate the mass of calcium iodide formed using its molar mass:
0.00674 moles CaI2 x 293.88 g/mol = 1.98 g CaI2
To know more about calcium iodide, visit:
https://brainly.com/question/29694775
#SPJ1
for a solution equilibrium, a change in concentration of a reactant or product does not change keq. group of answer choices true false
The given statement "A change in the concentration of the reactant or the product do not change keq" will be false. Because a change in the concentration of a reactant or product will change the value of Keq.
According to Le Chatelier's principle, when a stress is applied to a system at equilibrium, the system will respond in a way that partially counteracts the stress and reestablishes equilibrium. Changes in the concentration of a reactant or product will alter the concentrations of all species present in the reaction, and thus will disturb the equilibrium.
For example, if the concentration of a reactant is increased, the reaction will shift towards the product side to partially counteract the increase in the concentration of the reactant. This will result in an increase in the concentration of products and a decrease in the concentration of reactants. As a result, the value of Keq will change to reflect the new equilibrium concentrations of reactants and products.
To know more about Le Chatelier's principle here
https://brainly.com/question/2001993
#SPJ4
Please hurryyyy 100 points
Answer:
As more force glider moves faster
When 1.00g of nylon is burnt in excess oxygen, it produces 2.50g of carbon dioxide. What is the percentage of carbon in nylon?
The mass percentage of carbon in nylon is approximately 68.1%.
What is mass of carbon?
The first step is to calculate the amount of carbon in 2.50g of carbon dioxide, using the molar mass of carbon and carbon dioxide:
1 mole of carbon has a mass of 12.01g
1 mole of carbon dioxide has a mass of 44.01g (12.01g for carbon + 2(16.00g) for oxygen)
So, the mass of carbon in 2.50g of carbon dioxide is:
(12.01g / 44.01g) x 2.50g = 0.681g
This means that the original 1.00g of nylon must have contained 0.681g of carbon. To find the percentage of carbon in nylon, we divide the mass of carbon by the mass of nylon and multiply by 100:
(0.681g / 1.00g) x 100% = 68.1%
Therefore, the percentage of carbon in nylon is approximately 68.1%.
To know more about nylon, visit:
https://brainly.com/question/10278626
#SPJ1
Complete question is: When 1.00g of nylon is burnt in excess oxygen, it produces 2.50g of carbon dioxide. the percentage of carbon in nylon is approximately 68.1%.
how many times greater is the rate of effusion of molecular fluorine than that of molecular bromine at the same temperature and pressure? group of answer choices 3.062 2.051 4.450 7.280
The rate of effusion of molecular fluorine is 2.05 times than that of molecular bromine at the same temperature and pressure.
The rate of effusion of gas can be calculated by using Graham's Law.
According to this law, the rate of effusion of gas is inversely proportional to the square root of the molar mass of the gas.
The mathematical expression is represented as:
Rate of effusion ∝ [tex]\frac{1}{\sqrt{molar mass of the gas} }[/tex]
We know that,
Molar mass of bromine = 160 g/mol
Molar mass of fluorine =38 g/mol
For the rate of effusion of bromine to fluorine, the expression is given as:
[tex]\frac{rate of Fluorine gas}{rate of bromine gas} =\sqrt{\frac{molar mass of bromine gas}{molar mass of fluorine gas} }[/tex]
[tex]\frac{rate of Fluorine gas}{rate of bromine gas} =\sqrt{\frac{160}{38} }[/tex]= 2.05
Thus, the rate of effusion of fluorine is 2.05 times than that of bromine.
To know more about effusion here
https://brainly.com/question/9173434
#SPJ4